Skip to content

armgit / BUI

Public Imported from GitHub
0

Blender's GPU Accelerated UI, Decoupled from it's original codebase. Supports Rust, Python, JS, React, C & C++. Twice as good as GPUI

8.9 KB
Raw Blame
/* SPDX-FileCopyrightText: 2023 Blender Authors
 *
 * SPDX-License-Identifier: GPL-2.0-or-later */

#pragma once

#include "BLI_array.hh"
#include "BLI_math_mpq.hh"
#include "BLI_math_vector_mpq_types.hh"
#include "BLI_math_vector_types.hh"
#include "BLI_vector.hh"

namespace blender {

/** \file
 * \ingroup bli
 *
 * This header file contains both a C interface and a C++ interface
 * to the 2D Constrained Delaunay Triangulation library routine.
 */

/**
 * Interface for Constrained Delaunay Triangulation (CDT) in 2D.
 *
 * The input is a set of vertices, edges between those vertices,
 * and faces using those vertices.
 * Those inputs are called "constraints". The output must contain
 * those constraints, or at least edges, points, and vertices that
 * may be pieced together to form the constraints. Part of the
 * work of doing the CDT is to detect intersections and mergers
 * among the input elements, so these routines are also useful
 * for doing 2D intersection.
 *
 * The output is a triangulation of the plane that includes the
 * constraints in the above sense, and also satisfies the
 * "Delaunay condition" as modified to take into account that
 * the constraints must be there: for every non-constrained edge
 * in the output, there is a circle through the endpoints that
 * does not contain any of the vertices directly connected to
 * those endpoints. What this means in practice is that as
 * much as possible the triangles look "nice" -- not too long
 * and skinny.
 *
 * Optionally, the output can be a subset of the triangulation
 * (but still containing all of the constraints), to get the
 * effect of 2D intersection.
 *
 * The underlying method is incremental, but we need to know
 * beforehand a bounding box for all of the constraints.
 * This code can be extended in the future to allow for
 * deletion of constraints, if there is a use in Blender
 * for dynamically maintaining a triangulation.
 */

/** What triangles and edges of CDT are desired when getting output? */
enum CDT_output_type {
  /** All triangles, outer boundary is convex hull. */
  CDT_FULL,
  /** All triangles fully enclosed by constraint edges or faces. */
  CDT_INSIDE,
  /**
   * Like #CDT_INSIDE, but detect holes and omit those from output.
   *
   * Uses the "even-odd rule": a point is inside if a ray from that point crosses
   * an odd number of boundary edges. This creates alternating filled/unfilled regions
   * for nested or overlapping curves. Overlapping regions with the same winding
   * direction will cancel out and become holes.
   */
  CDT_INSIDE_WITH_HOLES,
  /**
   * Like #CDT_INSIDE_WITH_HOLES, but uses the **non-zero winding rule**.
   *
   * A point is inside if the winding number (sum of signed edge crossings) is non-zero.
   * This creates "union" behavior: overlapping curves with the same winding direction
   * merge together instead of creating holes.
   */
  CDT_INSIDE_WITH_HOLES_NONZERO,
  /** Only point, edge, and face constraints, and their intersections. */
  CDT_CONSTRAINTS,
  /**
   * Like #CDT_CONSTRAINTS, but keep enough edges so that any output faces that came
   * from input faces can be made as valid #BMesh faces in Blender: that is,
   * no vertex appears more than once and no isolated holes in faces.
   */
  CDT_CONSTRAINTS_VALID_BMESH,
  /**
   * Like #CDT_CONSTRAINTS_VALID_BMESH, but detect holes using the even-odd rule.
   * See #CDT_INSIDE_WITH_HOLES for explanation of the even-odd rule.
   */
  CDT_CONSTRAINTS_VALID_BMESH_WITH_HOLES,
  /**
   * Like #CDT_CONSTRAINTS_VALID_BMESH_WITH_HOLES, but uses non-zero winding rule.
   * See #CDT_INSIDE_WITH_HOLES_NONZERO for explanation.
   */
  CDT_CONSTRAINTS_VALID_BMESH_WITH_HOLES_NONZERO,
};

namespace meshintersect {

/**
 * Input to Constrained Delaunay Triangulation.
 * Input vertex coordinates are stored in `vert`. For the rest of the input,
 * vertices are referred to by indices into that array.
 * Edges and Faces are optional. If provided, they will
 * appear in the output triangulation ("constraints").
 * One can provide faces and not edges -- the edges
 * implied by the faces will be inferred.
 *
 * The edges are given by pairs of vertex indices.
 * The faces are given as groups of vertex indices, in counterclockwise order.
 *
 * The edges implied by the faces are automatically added
 * and need not be put in the edges array, which is intended
 * as a way to specify edges that are not part of any face.
 *
 * Some notes about some special cases and how they are handled:
 * - Input faces can have any number of vertices greater than 2. Depending
 *   on the output option, ngons may be triangulated or they may remain
 *   as ngons.
 * - Input faces may have repeated vertices. Output faces will not,
 *   except when the CDT_CONSTRAINTS output option is used.
 * - Input faces may have edges that self-intersect, but currently the labeling
 *   of which output faces have which input faces may not be done correctly,
 *   since the labeling relies on the inside being on the left of edges
 *   as one traverses the face. Output faces will not self-intersect.
 * - Input edges, including those implied by the input faces, may have
 *   zero-length or near-zero-length edges (nearness as determined by epsilon),
 *   but those edges will not be in the output.
 * - Input edges (including face edges) can overlap or nearly overlap each other.
 *   The output edges will not overlap, but instead be divided into as many
 *   edges as necessary to represent each overlap regime.
 * - Input vertices may be coincide with, or nearly coincide with (as determined
 *   by epsilon) other input vertices. Only one representative will survive
 *   in the output. If an input vertex is within epsilon of an edge (including
 *   an added triangulation edge), it will be snapped to that edge, so the
 *   output coordinates may not exactly match the input coordinates in all cases.
 * - Wire edges (those not part of faces) and isolated vertices are allowed in
 *   the input. If they are inside faces, they will be incorporated into the
 *   triangulation of those faces.
 *
 * Epsilon is used for "is it near enough" distance calculations.
 * If zero is supplied for epsilon, an internal value of 1e-8 used
 * instead, since this code will not work correctly if it is not allowed
 * to merge "too near" vertices.
 *
 * Normally the output will contain mappings from outputs to inputs.
 * If this is not needed, set need_ids to false and the execution may be much
 * faster in some circumstances.
 */
template<typename T> class CDT_input {
 public:
  Array<VecBase<T, 2>> vert;
  Array<std::pair<int, int>> edge;
  Array<Vector<int>> face;
  T epsilon{0};
  bool need_ids{true};
};

/**
 * A representation of the triangulation for output.
 * See #CDT_input for the representation of the output
 * vertices, edges, and faces, all represented in
 * a similar way to the input.
 *
 * The output may have merged some input vertices together,
 * if they were closer than some epsilon distance.
 * The output edges may be overlapping sub-segments of some
 * input edges; or they may be new edges for the triangulation.
 * The output faces may be pieces of some input faces, or they
 * may be new.
 *
 * Extra outputs are used to represent the output to input
 * mapping of vertices, edges, and faces.
 * These are only set if need_ids is true in the input.
 *
 *
 * For edges, the edge_orig triple can also say which original face
 * edge is part of a given output edge. See the comment below for how
 * to decode the entries in the edge_orig table.
 *
 * \note Regarding `uint32_t`: Each input face reserves a block of IDs
 * to encode its edges. These blocks stack up with the number of faces,
 * so `uint32_t` is used to provide sufficient range (see #153708).
 */
template<typename T> class CDT_result {
 public:
  Array<VecBase<T, 2>> vert;
  Array<std::pair<int, int>> edge;
  Array<Vector<int>> face;
  /* The orig vectors are only populated if the need_ids input field is true. */
  /** For each output vert, which input verts correspond to it? */
  Array<Vector<uint32_t>> vert_orig;
  /**
   * For each output edge, which input edges does it overlap?
   * The input edge ids are encoded as follows:
   *   if the value is less than face_edge_offset, then it is
   *      an index into the input edge[] array.
   *   else let (a, b) = the quotient and remainder of dividing
   *      the edge index by face_edge_offset; "a" will be the input face + 1,
   *      and "b" will be a position within that face.
   */
  Array<Vector<uint32_t>> edge_orig;
  /** For each output face, which original faces does it overlap? */
  Array<Vector<uint32_t>> face_orig;
  /** Used to encode edge_orig (see above). */
  uint32_t face_edge_offset;
};

CDT_result<double> delaunay_2d_calc(const CDT_input<double> &input, CDT_output_type output_type);

#ifdef WITH_GMP
CDT_result<mpq_class> delaunay_2d_calc(const CDT_input<mpq_class> &input,
                                       CDT_output_type output_type);
#endif

}  // namespace meshintersect
}  // namespace blender