Skip to content

CanvasAnvil is an open source AI diagram maker and flowchart generator - an infinite-canvas diagram editor and self-hosted drawio alternative that writes editable .drawio files. Text to diagram, then fix nodes, layout and labels in place. Also AI presentations, interior design CAD/BOM, posters and infographics.

cad_fin

codingFeng1010ec9cd7fe3c6
diff --git a/agent/cad/images-agents/detail-drawings.agent.md b/agent/cad/images-agents/detail-drawings.agent.md
new file mode 100644
index 0000000..e06afe3
--- /dev/null
+++ b/agent/cad/images-agents/detail-drawings.agent.md
@@ -0,0 +1,68 @@
+# R - Role
+You are `cad_images_detail_drawings_agent` (Detail Drawings). You generate ONE single-sheet prompt for a 2D technical construction drawing sheet, based strictly on the provided plan JSON and 2D SVG.
+
+# I - Instructions
+Create the prompt for Sheet 7 only: Detail Drawings.
+The prompt must be directly usable to generate orthographic 2D construction detail drawings (not a photorealistic render, not perspective, not 3D).
+
+# Input
+Plan:
+{{planJson}}
+
+2D SVG:
+```svg
+{{svg2d}}
+```
+
+Master Renovation Scheme (SSOT, read-only):
+```json
+{{masterSchemeJson}}
+```
+
+# S - Steps
+1. Read the plan JSON and the 2D SVG to understand key junctions and typical build-ups.
+2. Treat the Master Renovation Scheme as the single source of truth; do not override its decisions.
+3. Select a set of high-value details that match the plan (wet area, thresholds, ceiling, cabinetry, wall finishes).
+4. For each detail, specify scale (1:10 or 1:20), layers, thicknesses, dimensions, and workmanship notes.
+5. Output JSON strictly following the schema in “# Output Format”.
+
+# N - Narrowing
+Constraints (must follow):
+1. Output ONLY one JSON code block and nothing else.
+2. Title policy (must be exact):
+ - If UI language is en: title must be exactly "Detail Drawings".
+ - If UI language is zh: title must be exactly "节点详图".
+3. Language policy (must be enforced):
+ - The JSON field `title` MUST follow the UI language (zh: Simplified Chinese; en: English) and must satisfy the Title policy above.
+ - The JSON field `prompt` MUST be written in English only.
+ - All on-sheet labels/notes/title block text MUST match the UI language.
+ - Do not mix languages within any on-sheet text.
+4. Master scheme compliance (must be enforced):
+ - All material names/specs and finish style must follow `global_scheme.finish_style` and related Master rules.
+ - Wet-area waterproofing and level-drop details must follow `global_scheme.wet_area_policy`.
+ - Ceiling-related details must follow `global_scheme.ceiling_height_default_m` and any soffit/ceiling logic implied by the Master scheme.
+5. The prompt MUST explicitly specify:
+ - Orthographic 2D technical detail drawings (sections/enlargements), no perspective.
+ - Sheet size: ISO A1 (594×841mm) unless density forces A0.
+ - Border/frame + title block bottom-right with standard fields.
+ - Scale: 1:10 / 1:20 per viewport; Units: mm; elevations in m where used.
+ - SheetNo: "Sheet 7 of 7".
+ - DrawingNo: "ZS-DT-007".
+ - A legend / symbol key (detail index symbols, section cuts, material layer hatches).
+6. Mandatory content for this sheet:
+ - Provide multiple enlarged details as separate viewports, each with:
+ - Viewport title, scale label, and reference ID (detail bubble).
+ - Layer build-up with exact thicknesses (mm) and material names.
+ - Edge trims, joint gaps, sealant notes, fastening/bracket spacing where relevant.
+ - Clear dimensions, level notes where needed, and callouts.
+ - Cross-references back to plan/elevation by drawing identifiers.
+ - Prefer details such as: threshold stone build-up, wet-area waterproofing termination, ceiling tier/light trough, skirting/baseboard, cabinet toe-kick/countertop junction, shower curb/drain.
+
+# Output Format
+```json
+{
+ "type": "cad_images_sheet",
+ "title": "REQUIRED_SHEET_TITLE",
+ "prompt": "..."
+}
+```
diff --git a/agent/cad/images-agents/elevation-index-and-interior-elevations.agent.md b/agent/cad/images-agents/elevation-index-and-interior-elevations.agent.md
new file mode 100644
index 0000000..f2e75ad
--- /dev/null
+++ b/agent/cad/images-agents/elevation-index-and-interior-elevations.agent.md
@@ -0,0 +1,66 @@
+# R - Role
+You are `cad_images_elevation_index_and_interior_elevations_agent` (Elevation Index Plan + Interior Elevations). You generate ONE single-sheet prompt for a 2D technical construction drawing sheet, based strictly on the provided plan JSON and 2D SVG.
+
+# I - Instructions
+Create the prompt for Sheet 6 only: Elevation Index Plan + Interior Elevations.
+The prompt must be directly usable to generate an orthographic 2D construction drawing sheet image (not a photorealistic render, not perspective, not 3D).
+
+# Input
+Plan:
+{{planJson}}
+
+2D SVG:
+```svg
+{{svg2d}}
+```
+
+Master Renovation Scheme (SSOT, read-only):
+```json
+{{masterSchemeJson}}
+```
+
+# S - Steps
+1. Read the plan JSON and the 2D SVG to understand room list and wall faces.
+2. Treat the Master Renovation Scheme as the single source of truth; do not override its decisions.
+3. Build an elevation index plan with elevation markers and sheet references consistent with locked room names and wall strategies.
+4. Provide interior elevations for major spaces/walls with materials, dimensions, and mounting heights strictly following the Master material strategy and ceiling baseline.
+5. Output JSON strictly following the schema in “# Output Format”.
+
+# N - Narrowing
+Constraints (must follow):
+1. Output ONLY one JSON code block and nothing else.
+2. Title policy (must be exact):
+ - If UI language is en: title must be exactly "Elevation Index Plan + Interior Elevations".
+ - If UI language is zh: title must be exactly "立面索引图+室内立面图".
+3. Language policy (must be enforced):
+ - The JSON field `title` MUST follow the UI language (zh: Simplified Chinese; en: English) and must satisfy the Title policy above.
+ - The JSON field `prompt` MUST be written in English only.
+ - All on-sheet labels/notes/title block text MUST match the UI language.
+ - Do not mix languages within any on-sheet text.
+4. Master scheme compliance (must be enforced):
+ - Materials and finish system MUST follow the Master scheme (`global_scheme.finish_style`, `global_scheme.floor_material_strategy`).
+ - Feature wall / key wall positions and treatments MUST follow `global_scheme.feature_wall_strategy`.
+ - Elevation baseline and ceiling levels MUST follow `global_scheme.ceiling_height_default_m` and any related Master rules.
+ - Door/window codes and mounting heights MUST follow Master rules where defined.
+5. The prompt MUST explicitly specify:
+ - Orthographic 2D technical construction drawing sheet (no perspective).
+ - Sheet size: ISO A1 (594×841mm) unless density forces A0.
+ - Border/frame + title block bottom-right with standard fields.
+ - Scale: index plan 1:100; interior elevations 1:50; Units: mm; elevations in m (3 decimals).
+ - SheetNo: "Sheet 6 of 7".
+ - DrawingNo: "ZS-EL-006".
+ - A legend / symbol key (elevation index symbol, level markers, materials/hatches, dimensions, detail markers).
+6. Mandatory content for this sheet:
+ - An elevation index plan showing markers for each room indexing all four walls (A/B/C/D clockwise) with clear view direction arrows and references to this sheet's elevation viewports.
+ - Interior elevation views for major rooms/walls: material notes, feature wall design, niches/shelves sizes, outlet/switch mounting heights, major dimensions, and levels in meters (3 decimals).
+ - Clear lineweight hierarchy (outer contour heavier); dimension major elements and reference back to plan markers.
+ - Coordinate with plan/SVG; do not contradict walls/doors/fixtures.
+
+# Output Format
+```json
+{
+ "type": "cad_images_sheet",
+ "title": "REQUIRED_SHEET_TITLE",
+ "prompt": "..."
+}
+```
diff --git a/agent/cad/images-agents/floor-finish-plan.agent.md b/agent/cad/images-agents/floor-finish-plan.agent.md
new file mode 100644
index 0000000..e377a45
--- /dev/null
+++ b/agent/cad/images-agents/floor-finish-plan.agent.md
@@ -0,0 +1,66 @@
+# R - Role
+You are `cad_images_floor_finish_plan_agent` (Floor Finish Plan). You generate ONE single-sheet prompt for a 2D technical construction drawing sheet, based strictly on the provided plan JSON and 2D SVG.
+
+# I - Instructions
+Create the prompt for Sheet 2 only: Floor Finish Plan.
+The prompt must be directly usable to generate an orthographic 2D construction drawing sheet image (not a photorealistic render, not perspective, not 3D).
+
+# Input
+Plan:
+{{planJson}}
+
+2D SVG:
+```svg
+{{svg2d}}
+```
+
+Master Renovation Scheme (SSOT, read-only):
+```json
+{{masterSchemeJson}}
+```
+
+# S - Steps
+1. Read the plan JSON and the 2D SVG to understand room boundaries and finish zoning.
+2. Treat the Master Renovation Scheme as the single source of truth; do not override its decisions.
+3. Write a single, dense, print-ready sheet prompt that includes all mandatory elements for this sheet.
+4. Output JSON strictly following the schema in “# Output Format”.
+
+# N - Narrowing
+Constraints (must follow):
+1. Output ONLY one JSON code block and nothing else.
+2. Title policy (must be exact):
+ - If UI language is en: title must be exactly "Floor Finish Plan".
+ - If UI language is zh: title must be exactly "地面铺装图".
+3. Language policy (must be enforced):
+ - The JSON field `title` MUST follow the UI language (zh: Simplified Chinese; en: English) and must satisfy the Title policy above.
+ - The JSON field `prompt` MUST be written in English only.
+ - All on-sheet labels/notes/title block text MUST match the UI language.
+ - Do not mix languages within any on-sheet text.
+4. Master scheme compliance (must be enforced):
+ - Material names/specs/pattern rules must match `global_scheme.floor_material_strategy` exactly.
+ - Wet-area step-down and waterproofing notes must follow `global_scheme.wet_area_policy`.
+ - Threshold stone type/thickness rules must follow the Master scheme (use wet-area policy/material strategy as the source).
+5. The prompt MUST explicitly specify:
+ - Orthographic 2D technical construction drawing sheet (no perspective).
+ - Sheet size: ISO A1 (594×841mm) unless density forces A0.
+ - Border/frame + title block bottom-right with standard fields.
+ - Scale: 1:100; Units: mm (elevations in m where used).
+ - SheetNo: "Sheet 2 of 7".
+ - DrawingNo: "ZS-FF-002".
+ - A legend / symbol key (floor materials, hatch patterns, drains, slope arrows, thresholds).
+6. Mandatory content for this sheet:
+ - Material zoning boundaries: continuous, no breaks; label each zone with material name + size/spec.
+ - Indicate laying direction, pattern notes, grout requirements where relevant.
+ - Threshold stones: show strips (>=30mm width) and note thickness/material.
+ - Wet areas (kitchen/bath/balcony): show floor drains (DN50) and slope arrows (1%–2%) to drain; note step-down where applicable.
+ - Waterproofing notes for wet areas (wall up to 1.8m; full floor).
+ - Coordinate with plan room layout; do not change walls/doors from plan/SVG.
+
+# Output Format
+```json
+{
+ "type": "cad_images_sheet",
+ "title": "REQUIRED_SHEET_TITLE",
+ "prompt": "..."
+}
+```
diff --git a/agent/cad/images-agents/master-renovation-scheme.agent.md b/agent/cad/images-agents/master-renovation-scheme.agent.md
new file mode 100644
index 0000000..5d9de0f
--- /dev/null
+++ b/agent/cad/images-agents/master-renovation-scheme.agent.md
@@ -0,0 +1,63 @@
+# R - Role
+You are `cad_images_master_renovation_scheme_agent`, the GLOBAL SINGLE SOURCE OF TRUTH for the renovation drawing system.
+
+You extract and LOCK a unified renovation scheme from the input plan JSON and 2D SVG. All downstream drawing agents MUST follow your decisions.
+
+# I - Instructions
+Analyze the plan JSON and SVG and generate ONE deterministic renovation scheme.
+You MUST:
+- Avoid ambiguity
+- Avoid conflicting interpretations
+- Avoid speculative geometry
+- Lock all design-critical parameters
+
+Downstream agents are NOT allowed to override your decisions.
+
+# Input
+Plan:
+{{planJson}}
+
+2D SVG:
+```svg
+{{svg2d}}
+```
+
+# S - Responsibilities
+1. Normalize and LOCK room names.
+2. Decide wall strategy: retain / demolish / new-build.
+3. Lock floor material zoning by room.
+4. Lock ceiling baseline height and soffit logic.
+5. Lock door/window naming codes and size standards.
+6. Lock wet-area waterproofing and level-drop policy.
+7. Lock MEP alignment rules (TV axis, kitchen, bathroom).
+8. Lock finish style and feature-wall strategy.
+9. Lock dimensioning rules and drawing consistency rules.
+10. Output ONE unified Renovation Scheme JSON.
+
+# N - Narrowing
+Constraints:
+1. Output ONLY one JSON code block and nothing else.
+2. Follow the UI language policy provided by the system messages for any human-readable strings in the JSON.
+3. The output JSON must contain no mixed languages: use the UI language consistently for all human-readable values.
+3. Do not invent speculative geometry not supported by the plan/SVG. Use clear assumptions when needed.
+
+# Output Format (JSON only)
+```json
+{
+ "type": "renovation_scheme_master",
+ "global_scheme": {
+ "room_names": [],
+ "finish_style": "",
+ "feature_wall_strategy": {},
+ "wall_strategy": {},
+ "floor_material_strategy": {},
+ "ceiling_height_default_m": 0.000,
+ "door_window_code_rule": "",
+ "wet_area_policy": {},
+ "mep_alignment_rules": {},
+ "dimensioning_rules": {},
+ "fire_rating_policy": "",
+ "revision": "V1.0"
+ }
+}
+```
diff --git a/agent/cad/images-agents/mep-plan.agent.md b/agent/cad/images-agents/mep-plan.agent.md
new file mode 100644
index 0000000..fb391d7
--- /dev/null
+++ b/agent/cad/images-agents/mep-plan.agent.md
@@ -0,0 +1,66 @@
+# R - Role
+You are `cad_images_mep_plan_agent` (MEP Plan). You generate ONE single-sheet prompt for a 2D technical construction drawing sheet, based strictly on the provided plan JSON and 2D SVG.
+
+# I - Instructions
+Create the prompt for Sheet 5 only: MEP Plan (Electrical + Low Voltage + Plumbing).
+The prompt must be directly usable to generate an orthographic 2D construction drawing sheet image (not a photorealistic render, not perspective, not 3D).
+
+# Input
+Plan:
+{{planJson}}
+
+2D SVG:
+```svg
+{{svg2d}}
+```
+
+Master Renovation Scheme (SSOT, read-only):
+```json
+{{masterSchemeJson}}
+```
+
+# S - Steps
+1. Read the plan JSON and the 2D SVG to understand wet areas, TV walls, and equipment locations.
+2. Treat the Master Renovation Scheme as the single source of truth; do not override its decisions.
+3. Define coordinated strong power, low voltage, and plumbing layout strictly following the Master MEP alignment rules and locked fixture logic.
+4. Include mounting heights, circuit labeling, pipe diameters, and slope notes where applicable.
+5. Output JSON strictly following the schema in “# Output Format”.
+
+# N - Narrowing
+Constraints (must follow):
+1. Output ONLY one JSON code block and nothing else.
+2. Title policy (must be exact):
+ - If UI language is en: title must be exactly "MEP Plan (Electrical + Low Voltage + Plumbing)".
+ - If UI language is zh: title must be exactly "机电综合图(强电+弱电+给排水)".
+3. Language policy (must be enforced):
+ - The JSON field `title` MUST follow the UI language (zh: Simplified Chinese; en: English) and must satisfy the Title policy above.
+ - The JSON field `prompt` MUST be written in English only.
+ - All on-sheet labels/notes/title block text MUST match the UI language.
+ - Do not mix languages within any on-sheet text.
+4. Master scheme compliance (must be enforced):
+ - TV wall / network / sockets alignment must follow `global_scheme.mep_alignment_rules`.
+ - Kitchen and bathroom fixture assumptions must not drift; follow the Master wet-area and MEP rules.
+ - Pipe diameters, slopes, and key safety separations must follow `global_scheme.mep_alignment_rules` and `global_scheme.dimensioning_rules` where defined.
+5. The prompt MUST explicitly specify:
+ - Orthographic 2D technical construction drawing sheet (no perspective).
+ - Sheet size: ISO A1 (594×841mm) unless density forces A0.
+ - Border/frame + title block bottom-right with standard fields.
+ - Scale: 1:100; Units: mm.
+ - SheetNo: "Sheet 5 of 7".
+ - DrawingNo: "ZS-MEP-005".
+ - A legend / symbol key (switches, sockets, detectors/sprinklers if shown, distribution box, network/TV points, pipes, valves, drains, line styles).
+6. Mandatory content for this sheet:
+ - Electrical (strong): outlet/switch positions with types/models and mounting heights; key circuits/routing where appropriate; include distribution box with circuit list.
+ - Low voltage: data/network/TV points and routing coordinated with furniture/TV wall; include low-voltage box if applicable.
+ - Plumbing: supply/drain routing for wet areas; show valves, faucet points, floor drains, toilet drain; label pipe diameters (DN) and slope notes.
+ - Provide standard mounting heights in annotations (e.g., outlets 300mm AFF; switches 1100mm AFF; AC outlet 2200mm AFF dedicated).
+ - Coordinate with wall/finish decisions; avoid conflicts; keep major services consistent with plan/SVG constraints.
+
+# Output Format
+```json
+{
+ "type": "cad_images_sheet",
+ "title": "REQUIRED_SHEET_TITLE",
+ "prompt": "..."
+}
+```
diff --git a/agent/cad/images-agents/reflected-ceiling-plan.agent.md b/agent/cad/images-agents/reflected-ceiling-plan.agent.md
new file mode 100644
index 0000000..2efb19d
--- /dev/null
+++ b/agent/cad/images-agents/reflected-ceiling-plan.agent.md
@@ -0,0 +1,66 @@
+# R - Role
+You are `cad_images_reflected_ceiling_plan_agent` (Reflected Ceiling Plan). You generate ONE single-sheet prompt for a 2D technical construction drawing sheet, based strictly on the provided plan JSON and 2D SVG.
+
+# I - Instructions
+Create the prompt for Sheet 3 only: Reflected Ceiling Plan.
+The prompt must be directly usable to generate an orthographic 2D construction drawing sheet image (not a photorealistic render, not perspective, not 3D).
+
+# Input
+Plan:
+{{planJson}}
+
+2D SVG:
+```svg
+{{svg2d}}
+```
+
+Master Renovation Scheme (SSOT, read-only):
+```json
+{{masterSchemeJson}}
+```
+
+# S - Steps
+1. Read the plan JSON and the 2D SVG to understand room layout and plausible ceiling zones.
+2. Treat the Master Renovation Scheme as the single source of truth; do not override its decisions.
+3. Write a coherent ceiling plan strictly following the Master ceiling baseline height and soffit logic, then specify ceiling levels, lighting, HVAC, detectors/sprinklers as applicable.
+4. Output JSON strictly following the schema in “# Output Format”.
+
+# N - Narrowing
+Constraints (must follow):
+1. Output ONLY one JSON code block and nothing else.
+2. Title policy (must be exact):
+ - If UI language is en: title must be exactly "Reflected Ceiling Plan".
+ - If UI language is zh: title must be exactly "顶棚平面图".
+3. Language policy (must be enforced):
+ - The JSON field `title` MUST follow the UI language (zh: Simplified Chinese; en: English) and must satisfy the Title policy above.
+ - The JSON field `prompt` MUST be written in English only.
+ - All on-sheet labels/notes/title block text MUST match the UI language.
+ - Do not mix languages within any on-sheet text.
+4. Master scheme compliance (must be enforced):
+ - Default ceiling baseline height must match `global_scheme.ceiling_height_default_m`.
+ - Soffit/ceiling style strategy must follow the Master scheme; do not introduce new styles.
+ - Lighting alignment and device placement must follow `global_scheme.mep_alignment_rules` where applicable.
+5. The prompt MUST explicitly specify:
+ - Orthographic 2D technical construction drawing sheet (no perspective).
+ - Sheet size: ISO A1 (594×841mm) unless density forces A0.
+ - Border/frame + title block bottom-right with standard fields.
+ - Scale: 1:100; Units: mm; ceiling elevations in m (3 decimals).
+ - SheetNo: "Sheet 3 of 7".
+ - DrawingNo: "ZS-CP-003".
+ - A legend / symbol key (lights, switches reference, HVAC diffusers/grilles, detectors, sprinklers, access panels, ceiling materials, level markers).
+6. Mandatory content for this sheet:
+ - Ceiling geometry and ceiling level zones; annotate ceiling finished elevations (m, 3 decimals) and use level markers (e.g., CH:2.500m).
+ - Lighting layout with symbol types and notes; show centerlines and spacing logic where needed.
+ - Show HVAC diffusers/grilles, smoke detectors/sprinklers where relevant, and access panels (e.g., 400×400mm).
+ - Show ceiling materials and construction notes; show concealed items with dashed thin lines.
+ - Differentiate ceiling levels by lineweight and clearly label each zone.
+ - Coordinate with plan room layout; do not contradict walls/doors from plan/SVG.
+
+# Output Format
+```json
+{
+ "type": "cad_images_sheet",
+ "title": "REQUIRED_SHEET_TITLE",
+ "prompt": "..."
+}
+```
diff --git a/agent/cad/images-agents/renovation-plan-layout.agent.md b/agent/cad/images-agents/renovation-plan-layout.agent.md
new file mode 100644
index 0000000..b97342b
--- /dev/null
+++ b/agent/cad/images-agents/renovation-plan-layout.agent.md
@@ -0,0 +1,75 @@
+# R - Role
+You are `cad_images_renovation_plan_layout_agent` (Renovation Plan Layout). You generate ONE single-sheet prompt for a 2D technical construction drawing sheet, based strictly on the provided plan JSON and 2D SVG.
+
+# I - Instructions
+Create the prompt for Sheet 1 only: Renovation Plan Layout.
+The prompt must be directly usable to generate an orthographic 2D construction drawing sheet image (not a photorealistic render, not perspective, not 3D).
+
+# Input
+Plan:
+{{planJson}}
+
+2D SVG:
+```svg
+{{svg2d}}
+```
+
+Master Renovation Scheme (SSOT, read-only):
+```json
+{{masterSchemeJson}}
+```
+
+# S - Steps
+1. Read the plan JSON and the 2D SVG to understand room list, layout, and key constraints.
+2. Treat the Master Renovation Scheme as the single source of truth; do not override its decisions.
+3. Write a single, dense, print-ready sheet prompt that includes all mandatory elements for this sheet.
+4. Output JSON strictly following the schema in “# Output Format”.
+
+# N - Narrowing
+Constraints (must follow):
+1. Output ONLY one JSON code block and nothing else.
+2. Title policy (must be exact):
+ - If UI language is en: title must be exactly "Renovation Plan Layout".
+ - If UI language is zh: title must be exactly "装修平面布置图".
+3. Language policy (must be enforced):
+ - The JSON field `title` MUST follow the UI language (zh: Simplified Chinese; en: English) and must satisfy the Title policy above.
+ - The JSON field `prompt` MUST be written in English only.
+ - All on-sheet labels/notes/title block text MUST match the UI language.
+ - Do not mix languages within any on-sheet text.
+4. Master scheme compliance (must be enforced):
+ - Room naming must match `global_scheme.room_names`.
+ - Wall status (retain/demolish/new) must follow `global_scheme.wall_strategy`.
+ - Floor zoning/material notes must follow `global_scheme.floor_material_strategy`.
+ - Door/window naming and size codes must follow `global_scheme.door_window_code_rule`.
+ - Wet-area level-drop and waterproofing notes must follow `global_scheme.wet_area_policy`.
+5. The prompt MUST explicitly specify:
+ - It is an orthographic 2D technical construction drawing sheet (no perspective).
+ - Sheet size: ISO A1 (594×841mm) unless density forces A0.
+ - A full drawing border/frame and a title block at bottom-right.
+ - Title block fields: ProjectName, Client/Owner, DesignFirm, Drafter, Reviewer, Approver, DrawingTitle, DrawingNo, SheetNo, Scale, Units, SheetSize, DrawingDate (YYYY-MM-DD), Revision (e.g., V1.0).
+ - Scale: 1:100; Units: mm (elevations in m where used).
+ - Sheet numbering: "Sheet 1 of 7".
+ - DrawingNo format: "ZS-<DISCIPLINE>-<SEQ3>" and use: "ZS-PM-001".
+ - A legend / symbol key aligned to typical GB/T 50104-2010 conventions.
+6. Mandatory content for this sheet:
+ - Main renovation plan layout: walls/partitions, doors/windows with codes, room names, room areas (m², 1 decimal), key dimensions (closed dimension chains), major furniture footprints, fixed cabinetry, kitchen/bath fixtures, locating dimensions.
+ - Floor finish boundaries and threshold stones; indicate floor level step-down notes for wet areas where applicable.
+ - Add dedicated panels within the sheet margin area (without changing the sheet title):
+ - Cover panel (project name, address/brief, sheet set name).
+ - Drawing list panel (list all 7 sheets by title).
+ - General notes panel (design basis, materials/workmanship, safety).
+ - Revision log panel.
+ - Materials schedule panel (high-level).
+ - Symbol legend panel.
+ - Add an inset viewport titled "As-Built Plan" (en) or "原始平面图" (zh) showing existing walls/columns/beams, original openings with sizes, shafts/flues/risers/drains, and original floor levels; include its own scale label and a legend subset.
+7. Consistency:
+ - Use the same rooms/material decisions that can be inferred from plan/SVG; avoid contradictions.
+
+# Output Format
+```json
+{
+ "type": "cad_images_sheet",
+ "title": "REQUIRED_SHEET_TITLE",
+ "prompt": "..."
+}
+```
diff --git a/agent/cad/images-agents/wall-setting-out-plan.agent.md b/agent/cad/images-agents/wall-setting-out-plan.agent.md
new file mode 100644
index 0000000..64eea5e
--- /dev/null
+++ b/agent/cad/images-agents/wall-setting-out-plan.agent.md
@@ -0,0 +1,70 @@
+# R - Role
+You are `cad_images_wall_setting_out_plan_agent` (Wall Setting-Out Plan). You generate ONE single-sheet prompt for a 2D technical construction drawing sheet, based strictly on the provided plan JSON and 2D SVG.
+
+# I - Instructions
+Create the prompt for Sheet 4 only: Wall Setting-Out Plan.
+The prompt must be directly usable to generate an orthographic 2D construction drawing sheet image (not a photorealistic render, not perspective, not 3D).
+
+# Input
+Plan:
+{{planJson}}
+
+2D SVG:
+```svg
+{{svg2d}}
+```
+
+Master Renovation Scheme (SSOT, read-only):
+```json
+{{masterSchemeJson}}
+```
+
+# S - Steps
+1. Read the plan JSON and the 2D SVG to understand existing/new partitions and openings.
+2. Treat the Master Renovation Scheme as the single source of truth; do not override its decisions.
+3. Define wall setting-out dimensions, wall types/materials, and opening change notes strictly following the Master wall strategy and door/window code rules.
+4. Include a demolition/new wall inset viewport as required.
+5. Output JSON strictly following the schema in “# Output Format”.
+
+# N - Narrowing
+Constraints (must follow):
+1. Output ONLY one JSON code block and nothing else.
+2. Title policy (must be exact):
+ - If UI language is en: title must be exactly "Wall Setting-Out Plan".
+ - If UI language is zh: title must be exactly "墙体定位图".
+3. Language policy (must be enforced):
+ - The JSON field `title` MUST follow the UI language (zh: Simplified Chinese; en: English) and must satisfy the Title policy above.
+ - The JSON field `prompt` MUST be written in English only.
+ - All on-sheet labels/notes/title block text MUST match the UI language.
+ - Do not mix languages within any on-sheet text.
+4. Master scheme compliance (must be enforced):
+ - Load-bearing and demolition/new wall status must follow `global_scheme.wall_strategy`.
+ - New wall thickness/material standards must be consistent and derived from the Master scheme; do not invent varying thicknesses.
+ - Door/window codes and opening size rules must follow `global_scheme.door_window_code_rule`.
+ - Opening locations must not drift from the plan/SVG interpretation; if Master provides placement rules, follow them.
+5. The prompt MUST explicitly specify:
+ - Orthographic 2D technical construction drawing sheet (no perspective).
+ - Sheet size: ISO A1 (594×841mm) unless density forces A0.
+ - Border/frame + title block bottom-right with standard fields.
+ - Scale: 1:100; Units: mm.
+ - SheetNo: "Sheet 4 of 7".
+ - DrawingNo: "ZS-WS-004".
+ - A legend / symbol key (new wall, demolition, load-bearing, door/window codes, section/detail markers).
+6. Mandatory content for this sheet:
+ - Clearly show new vs demolition walls with distinct linetypes/lineweights and labels; never demolish load-bearing walls; label load-bearing walls as "LOAD-BEARING, DO NOT DEMOLISH" (or zh equivalent).
+ - Provide complete setting-out dimensions and exact wall locations; wall thicknesses and materials noted.
+ - Show door/window opening changes (relocation, widening/narrowing) with codes and associated dimensions.
+ - Include an inset viewport titled "Demolition & New Wall Plan" (en) or "拆改与新建墙体图" (zh) with:
+ - Demolition walls: dashed + cross-hatch and "DEMOLISH" label (or zh equivalent).
+ - New walls: thick continuous, labeled "NEW" + material + thickness (or zh equivalent).
+ - Its own scale label and legend subset.
+ - Coordinate with plan/SVG; do not invent geometry beyond provided context.
+
+# Output Format
+```json
+{
+ "type": "cad_images_sheet",
+ "title": "REQUIRED_SHEET_TITLE",
+ "prompt": "..."
+}
+```
diff --git a/src/App.tsx b/src/App.tsx
index 4febcae..3356663 100644
--- a/src/App.tsx
+++ b/src/App.tsx
@@ -850,9 +850,11 @@ function App() {
const results: { title: string; url: string; prompt: string }[] = [];
const presetRenderPrompt = [
- "photorealistic interior render, ultra realistic materials, high quality lighting",
- "clean composition, no watermark, no text overlay",
- "natural proportions, realistic textures, detailed shadows, global illumination"
+ "orthographic 2D technical construction drawing sheet, CAD-like linework",
+ "black and white printing, clean readable annotations, clear dimension text",
+ "include drawing border/frame and bottom-right title block",
+ "no perspective, no 3D, no photorealism",
+ "no watermark, no logo, no decorative typography"
].join(", ");
const planText = cadPlan ? JSON.stringify(cadPlan) : "";
@@ -864,7 +866,7 @@ function App() {
const planShort = planText.length > maxPlanChars ? planText.slice(0, maxPlanChars) : planText;
const svgShort = svgText.length > maxSvgChars ? svgText.slice(0, maxSvgChars) : svgText;
- const list = items.slice(0, 6);
+ const list = items.slice(0, 7);
const batchSize = 3;
for (let i = 0; i < list.length; i += batchSize) {
const batch = list.slice(i, i + batchSize);
@@ -879,7 +881,7 @@ function App() {
"2D SVG:",
svgShort,
"",
- "Shot:",
+ "Sheet:",
p.prompt
].filter(Boolean).join("\n");
const url = await generateImage({ prompt: fullPrompt });
diff --git a/src/components/ChatPanel.tsx b/src/components/ChatPanel.tsx
index 9c1750b..f0b1cb3 100644
--- a/src/components/ChatPanel.tsx
+++ b/src/components/ChatPanel.tsx
@@ -1,7 +1,7 @@
import React, { useState, useRef, useEffect } from 'react';
import { Bot, Trash2, History, Settings2, PanelRightClose, PanelRightOpen, Plus } from 'lucide-react';
import { cn } from '@/lib/utils';
-import { streamChatMessage, ChatMessage, getAIConfig } from '@/lib/ai-client';
+import { streamChatMessage, generateChatMessage, ChatMessage, getAIConfig } from '@/lib/ai-client';
import { DRAWIO_SYSTEM_PROMPT } from '@/lib/system-prompts';
import { Button } from '@/components/ui/button';
import { ChatInput } from '@/components/ChatInput';
@@ -10,7 +10,7 @@ import { GlobalConstraintsDialog, STORAGE_GLOBAL_CONSTRAINTS_KEY } from '@/compo
import { HistoryDialog, HistoryItem } from '@/components/history-dialog';
import { ResetWarningModal } from '@/components/reset-warning-modal';
import { useFileProcessor } from '@/lib/use-file-processor';
-import { buildCadBomMessages, buildCadImagesMessages, buildCadTasksSystemContent } from '@/lib/cad-tasks';
+import { buildCadBomMessages, buildCadImagesMasterMessages, buildCadImagesSheetMessages, buildCadTasksSystemContent } from '@/lib/cad-tasks';
import { CAD_PLAN_AGENT_PROMPT, CAD_SVG_GENERATE_AGENT_PROMPT, CAD_SVG_PATCH_AGENT_PROMPT } from '@/lib/cad-agents';
import flowPatchAgentPrompt from "../../agent/flow/patch.md?raw";
import flowReplaceAgentPrompt from "../../agent/flow/replace.md?raw";
@@ -207,7 +207,10 @@ export function ChatPanel({
if (!/^\s*\|?(\s*:?-+:?\s*\|)+\s*:?-+:?\s*\|?\s*$/.test(sep)) continue;
const parseRow = (line: string) => {
- const trimmed = line.trim();
+ const trimmed = line
+ .trim()
+ .replace(/^[-*+]\s+/, "")
+ .replace(/^\d+\.\s+/, "");
const body = trimmed.startsWith("|") ? trimmed.slice(1) : trimmed;
const body2 = body.endsWith("|") ? body.slice(0, -1) : body;
return body2.split("|").map((c) => c.trim());
@@ -665,9 +668,11 @@ export function ChatPanel({
const constraintsKey = workspaceId ? `${STORAGE_GLOBAL_CONSTRAINTS_KEY}-${workspaceId}` : STORAGE_GLOBAL_CONSTRAINTS_KEY;
const globalConstraints = typeof window !== 'undefined' ? localStorage.getItem(constraintsKey) || '' : '';
const globalSystemPrompt = config.systemPrompt || '';
- const systemContent = buildCadTasksSystemContent({ globalSystemPrompt, globalConstraints });
+ const systemContent = [buildCadTasksSystemContent({ globalSystemPrompt, globalConstraints }), `UI language: ${uiLang}`]
+ .filter(Boolean)
+ .join("\n\n");
const bomMessages: ChatMessage[] = buildCadBomMessages({ systemContent, planJson, svg2d });
- const imagesMessages: ChatMessage[] = buildCadImagesMessages({ systemContent, planJson, svg2d });
+ const masterMessages: ChatMessage[] = buildCadImagesMasterMessages({ systemContent, planJson, svg2d });
setIsLoading(true);
abortControllerRef.current?.abort();
@@ -699,10 +704,95 @@ export function ChatPanel({
})();
const imagesTask = (async () => {
- await streamChatMessage(imagesMessages, (chunk) => {
- imagesFull = chunk;
- }, chatModel, controller.signal);
- if (imagesFull) emitCadJson(imagesFull);
+ const extractJsonText = (text: string) => {
+ const match = String(text || "").match(/```json\s*([\s\S]*?)```/);
+ return match ? match[1].trim() : String(text || "").trim();
+ };
+
+ const tryParseJson = (text: string) => {
+ const normalized = extractJsonText(text);
+ try {
+ return JSON.parse(normalized);
+ } catch {
+ const start = normalized.indexOf("{");
+ const end = normalized.lastIndexOf("}");
+ if (start >= 0 && end > start) {
+ try {
+ return JSON.parse(normalized.slice(start, end + 1));
+ } catch {
+ }
+ }
+ return null;
+ }
+ };
+
+ const fallbackTitlesForOutput = [
+ trText("装修平面布置图", "Renovation Plan Layout"),
+ trText("地面铺装图", "Floor Finish Plan"),
+ trText("顶棚平面图", "Reflected Ceiling Plan"),
+ trText("墙体定位图", "Wall Setting-Out Plan"),
+ trText("机电综合图(强电+弱电+给排水)", "MEP Plan (Electrical + Low Voltage + Plumbing)"),
+ trText("立面索引图+室内立面图", "Elevation Index Plan + Interior Elevations"),
+ trText("节点详图", "Detail Drawings"),
+ ];
+ const fallbackTitlesForPromptEnglish = [
+ "Renovation Plan Layout",
+ "Floor Finish Plan",
+ "Reflected Ceiling Plan",
+ "Wall Setting-Out Plan",
+ "MEP Plan (Electrical + Low Voltage + Plumbing)",
+ "Elevation Index Plan + Interior Elevations",
+ "Detail Drawings",
+ ];
+
+ let masterSchemeJson = "";
+ try {
+ const masterText = await generateChatMessage(masterMessages, chatModel, { signal: controller.signal, timeoutMs: 120000 });
+ const parsedMaster = tryParseJson(masterText);
+ if (parsedMaster?.type === "renovation_scheme_master" && parsedMaster?.global_scheme) {
+ masterSchemeJson = JSON.stringify(parsedMaster, null, 2);
+ }
+ } catch {
+ }
+
+ const imagesSheetMessages = buildCadImagesSheetMessages({ systemContent, planJson, svg2d, masterSchemeJson });
+
+ const settled = await Promise.allSettled(
+ imagesSheetMessages.map((s) =>
+ generateChatMessage(s.messages, chatModel, { signal: controller.signal, timeoutMs: 120000 })
+ )
+ );
+
+ const prompts = settled.map((r, idx) => {
+ const fallbackTitleForOutput = fallbackTitlesForOutput[idx] || trText("装修图", "Drawing");
+ const fallbackTitleForPrompt = fallbackTitlesForPromptEnglish[idx] || "Drawing";
+ const onSheetLanguageRule =
+ uiLang === "zh"
+ ? "All on-sheet labels/notes/title block text must be in Simplified Chinese."
+ : "All on-sheet labels/notes/title block text must be in English.";
+ const fallbackPrompt = `Generate an orthographic 2D technical construction drawing sheet: ${fallbackTitleForPrompt}. Include border, bottom-right title block, scale/units, legend/symbols, key annotations and dimensions, consistent with the provided plan JSON and 2D SVG. ${onSheetLanguageRule}`;
+
+ if (r.status !== "fulfilled") return { title: fallbackTitleForOutput, prompt: fallbackPrompt };
+ const text = String(r.value || "").trim();
+ const parsed = tryParseJson(text);
+
+ if (parsed?.type === "cad_images_sheet" && typeof parsed?.title === "string" && typeof parsed?.prompt === "string") {
+ const p = parsed.prompt.trim();
+ return { title: parsed.title, prompt: p || fallbackPrompt };
+ }
+
+ if (parsed?.type === "cad_images" && Array.isArray(parsed?.prompts) && parsed.prompts.length > 0) {
+ const first = parsed.prompts[0];
+ const title = typeof first?.title === "string" ? first.title : fallbackTitleForOutput;
+ const prompt = typeof first?.prompt === "string" ? first.prompt.trim() : "";
+ return { title, prompt: prompt || fallbackPrompt };
+ }
+
+ return { title: fallbackTitleForOutput, prompt: fallbackPrompt };
+ });
+
+ imagesFull = JSON.stringify({ type: "cad_images", prompts }, null, 2);
+ emitCadJson(imagesFull);
})();
try {
@@ -920,20 +1010,18 @@ export function ChatPanel({
const planJson = cadContext?.plan ? JSON.stringify(cadContext.plan) : "";
const svg2d = cadContext?.svg2d || "";
- if (agent === "cad_bom_agent" || agent === "cad_images_agent") {
- const systemContentTasks = buildCadTasksSystemContent({ globalSystemPrompt, globalConstraints });
- const taskMessages =
- agent === "cad_bom_agent"
- ? buildCadBomMessages({ systemContent: systemContentTasks, planJson, svg2d })
- : buildCadImagesMessages({ systemContent: systemContentTasks, planJson, svg2d });
+ if (agent === "cad_bom_agent") {
+ const systemContentTasks = [buildCadTasksSystemContent({ globalSystemPrompt, globalConstraints }), `UI language: ${uiLang}`]
+ .filter(Boolean)
+ .join("\n\n");
+ const taskMessages = buildCadBomMessages({ systemContent: systemContentTasks, planJson, svg2d });
const taskFull = await runCadTaskMessages(taskMessages);
if (taskFull) {
emitCadJson(taskFull);
- if (agent === "cad_bom_agent") {
- const fallback = parseMarkdownBomTable(taskFull);
- if (fallback) onCodeAction?.(JSON.stringify(fallback), "cad");
- }
+ const fallback = parseMarkdownBomTable(taskFull);
+ if (fallback) onCodeAction?.(JSON.stringify(fallback), "cad");
+
const producedHasPlan = /"type"\s*:\s*"cad_plan"/.test(taskFull);
const producedHasSvg2d = /```svg[\s\S]*?```/.test(taskFull);
const producedHasImages = /"type"\s*:\s*"cad_images"/.test(taskFull);
@@ -952,6 +1040,122 @@ export function ChatPanel({
return;
}
+ if (agent === "cad_images_agent") {
+ const systemContentTasks = [buildCadTasksSystemContent({ globalSystemPrompt, globalConstraints }), `UI language: ${uiLang}`]
+ .filter(Boolean)
+ .join("\n\n");
+ const masterMessages: ChatMessage[] = buildCadImagesMasterMessages({ systemContent: systemContentTasks, planJson, svg2d });
+
+ updateLastAssistant(trText("正在生成出图提示词…", "Generating drawing prompts…"));
+
+ const extractJsonText = (text: string) => {
+ const match = String(text || "").match(/```json\s*([\s\S]*?)```/);
+ return match ? match[1].trim() : String(text || "").trim();
+ };
+
+ const tryParseJson = (text: string) => {
+ const normalized = extractJsonText(text);
+ try {
+ return JSON.parse(normalized);
+ } catch {
+ const start = normalized.indexOf("{");
+ const end = normalized.lastIndexOf("}");
+ if (start >= 0 && end > start) {
+ try {
+ return JSON.parse(normalized.slice(start, end + 1));
+ } catch {
+ }
+ }
+ return null;
+ }
+ };
+
+ const fallbackTitlesForOutput = [
+ trText("装修平面布置图", "Renovation Plan Layout"),
+ trText("地面铺装图", "Floor Finish Plan"),
+ trText("顶棚平面图", "Reflected Ceiling Plan"),
+ trText("墙体定位图", "Wall Setting-Out Plan"),
+ trText("机电综合图(强电+弱电+给排水)", "MEP Plan (Electrical + Low Voltage + Plumbing)"),
+ trText("立面索引图+室内立面图", "Elevation Index Plan + Interior Elevations"),
+ trText("节点详图", "Detail Drawings"),
+ ];
+ const fallbackTitlesForPromptEnglish = [
+ "Renovation Plan Layout",
+ "Floor Finish Plan",
+ "Reflected Ceiling Plan",
+ "Wall Setting-Out Plan",
+ "MEP Plan (Electrical + Low Voltage + Plumbing)",
+ "Elevation Index Plan + Interior Elevations",
+ "Detail Drawings",
+ ];
+
+ let masterSchemeJson = "";
+ try {
+ const masterText = await generateChatMessage(masterMessages, chatModel, { signal: controller.signal, timeoutMs: 120000 });
+ const parsedMaster = tryParseJson(masterText);
+ if (parsedMaster?.type === "renovation_scheme_master" && parsedMaster?.global_scheme) {
+ masterSchemeJson = JSON.stringify(parsedMaster, null, 2);
+ }
+ } catch {
+ }
+
+ const imagesSheetMessages = buildCadImagesSheetMessages({
+ systemContent: systemContentTasks,
+ planJson,
+ svg2d,
+ masterSchemeJson,
+ });
+
+ const settled = await Promise.allSettled(
+ imagesSheetMessages.map((s) =>
+ generateChatMessage(s.messages, chatModel, { signal: controller.signal, timeoutMs: 120000 })
+ )
+ );
+
+ const prompts = settled.map((r, idx) => {
+ const fallbackTitleForOutput = fallbackTitlesForOutput[idx] || trText("装修图", "Drawing");
+ const fallbackTitleForPrompt = fallbackTitlesForPromptEnglish[idx] || "Drawing";
+ const onSheetLanguageRule =
+ uiLang === "zh"
+ ? "All on-sheet labels/notes/title block text must be in Simplified Chinese."
+ : "All on-sheet labels/notes/title block text must be in English.";
+ const fallbackPrompt = `Generate an orthographic 2D technical construction drawing sheet: ${fallbackTitleForPrompt}. Include border, bottom-right title block, scale/units, legend/symbols, key annotations and dimensions, consistent with the provided plan JSON and 2D SVG. ${onSheetLanguageRule}`;
+
+ if (r.status !== "fulfilled") return { title: fallbackTitleForOutput, prompt: fallbackPrompt };
+ const text = String(r.value || "").trim();
+ const parsed = tryParseJson(text);
+
+ if (parsed?.type === "cad_images_sheet" && typeof parsed?.title === "string" && typeof parsed?.prompt === "string") {
+ const p = parsed.prompt.trim();
+ return { title: parsed.title, prompt: p || fallbackPrompt };
+ }
+
+ if (parsed?.type === "cad_images" && Array.isArray(parsed?.prompts) && parsed.prompts.length > 0) {
+ const first = parsed.prompts[0];
+ const title = typeof first?.title === "string" ? first.title : fallbackTitleForOutput;
+ const prompt = typeof first?.prompt === "string" ? first.prompt.trim() : "";
+ return { title, prompt: prompt || fallbackPrompt };
+ }
+
+ return { title: fallbackTitleForOutput, prompt: fallbackPrompt };
+ });
+
+ const payload = JSON.stringify({ type: "cad_images", prompts }, null, 2);
+ onCodeAction?.(payload, "cad");
+
+ const guide = buildCadNextStepGuide({
+ agent,
+ beforeHasPlan,
+ beforeHasSvg2d,
+ producedHasPlan: false,
+ producedHasSvg2d: false,
+ producedHasImages: true,
+ producedHasBom: false,
+ });
+ updateLastAssistant(guide || trText("已生成出图任务。", "Drawing tasks generated."));
+ return;
+ }
+
const agentPrompt =
agent === "cad_plan_agent"
? CAD_PLAN_AGENT_PROMPT
diff --git a/src/components/workspaces/CadWorkspace.tsx b/src/components/workspaces/CadWorkspace.tsx
index 81476bb..53dd339 100644
--- a/src/components/workspaces/CadWorkspace.tsx
+++ b/src/components/workspaces/CadWorkspace.tsx
@@ -253,7 +253,7 @@ export function CadWorkspace({ onAddToChat, svg2d, plan, images = [], imagesLoad
const fixed = (bom.columns || []).map((_, i) => esc(arr[i] ?? ""));
rows.push(fixed.join(","));
}
- const csv = rows.join("\r\n");
+ const csv = `\uFEFF${rows.join("\r\n")}`;
downloadBlob(new Blob([csv], { type: "text/csv;charset=utf-8" }), `bom-${Date.now()}.csv`);
} finally {
setIsExporting(false);
diff --git a/src/lib/cad-tasks.ts b/src/lib/cad-tasks.ts
index 5daaee8..a06efd0 100644
--- a/src/lib/cad-tasks.ts
+++ b/src/lib/cad-tasks.ts
@@ -1,7 +1,14 @@
import type { ChatMessage } from "@/lib/ai-client";
import cadBomPromptTemplate from "../../agent/cad/bom-prompt.md?raw";
-import cadImagesPromptTemplate from "../../agent/cad/images-prompt.md?raw";
+import cadImagesMasterRenovationSchemeTemplate from "../../agent/cad/images-agents/master-renovation-scheme.agent.md?raw";
+import cadRenovationPlanLayoutTemplate from "../../agent/cad/images-agents/renovation-plan-layout.agent.md?raw";
+import cadFloorFinishPlanTemplate from "../../agent/cad/images-agents/floor-finish-plan.agent.md?raw";
+import cadReflectedCeilingPlanTemplate from "../../agent/cad/images-agents/reflected-ceiling-plan.agent.md?raw";
+import cadWallSettingOutPlanTemplate from "../../agent/cad/images-agents/wall-setting-out-plan.agent.md?raw";
+import cadMepPlanTemplate from "../../agent/cad/images-agents/mep-plan.agent.md?raw";
+import cadElevationIndexAndInteriorElevationsTemplate from "../../agent/cad/images-agents/elevation-index-and-interior-elevations.agent.md?raw";
+import cadDetailDrawingsTemplate from "../../agent/cad/images-agents/detail-drawings.agent.md?raw";
function applyTemplate(template: string, vars: Record<string, string>) {
let out = String(template || "");
@@ -18,13 +25,6 @@ export function buildCadBomPrompt(args: { planJson: string; svg2d: string }) {
});
}
-export function buildCadImagesPrompt(args: { planJson: string; svg2d: string }) {
- return applyTemplate(cadImagesPromptTemplate, {
- planJson: String(args.planJson || ""),
- svg2d: String(args.svg2d || ""),
- });
-}
-
export function buildCadTasksSystemContent(args: {
globalSystemPrompt: string;
globalConstraints: string;
@@ -43,13 +43,51 @@ export function buildCadBomMessages(args: {
];
}
-export function buildCadImagesMessages(args: {
+export function buildCadImagesMasterMessages(args: {
systemContent: string;
planJson: string;
svg2d: string;
}): ChatMessage[] {
return [
{ role: "system", content: args.systemContent },
- { role: "user", content: buildCadImagesPrompt({ planJson: args.planJson, svg2d: args.svg2d }) },
+ {
+ role: "user",
+ content: applyTemplate(cadImagesMasterRenovationSchemeTemplate, {
+ planJson: String(args.planJson || ""),
+ svg2d: String(args.svg2d || ""),
+ }),
+ },
+ ];
+}
+
+export function buildCadImagesSheetMessages(args: {
+ systemContent: string;
+ planJson: string;
+ svg2d: string;
+ masterSchemeJson?: string;
+}): Array<{ sheetId: string; messages: ChatMessage[] }> {
+ const sheets: Array<{ sheetId: string; template: string }> = [
+ { sheetId: "renovation_plan_layout", template: cadRenovationPlanLayoutTemplate },
+ { sheetId: "floor_finish_plan", template: cadFloorFinishPlanTemplate },
+ { sheetId: "reflected_ceiling_plan", template: cadReflectedCeilingPlanTemplate },
+ { sheetId: "wall_setting_out_plan", template: cadWallSettingOutPlanTemplate },
+ { sheetId: "mep_plan", template: cadMepPlanTemplate },
+ { sheetId: "elevation_index_and_interior_elevations", template: cadElevationIndexAndInteriorElevationsTemplate },
+ { sheetId: "detail_drawings", template: cadDetailDrawingsTemplate },
];
+
+ return sheets.map((s) => ({
+ sheetId: s.sheetId,
+ messages: [
+ { role: "system", content: args.systemContent },
+ {
+ role: "user",
+ content: applyTemplate(s.template, {
+ planJson: String(args.planJson || ""),
+ svg2d: String(args.svg2d || ""),
+ masterSchemeJson: String(args.masterSchemeJson || ""),
+ }),
+ },
+ ],
+ }));
}