Open source Loom alternative. Beautiful, shareable screen recordings.
Rust appcapcossloommacnextjsnextjs15open-sourceossreactrecordrustscreen-capturescreen-recorderscreenshotsolidjstauritauri-apptypescriptvite
import type {
Camera3DBlurMode,
Camera3DBlur as RawCamera3DBlur,
Camera3DKeyframe as RawCamera3DKeyframe,
Camera3DProperties as RawCamera3DProperties,
Camera3DSegment as RawCamera3DSegment,
Camera3DTracks as RawCamera3DTracks,
} from "~/utils/tauri";
export type { Camera3DBlurMode };
/**
* Local, strict mirrors of the generated schema: every field is required so the
* editor never has to re-check for absent values while sampling or editing.
* `normalizeCamera3DSegments` is the one place the loose wire shape is filled in.
*/
export type Camera3DProperties = {
tiltX: number;
tiltY: number;
roll: number;
rotateX: number;
rotateY: number;
fov: number;
zoom: number;
panX: number;
panY: number;
};
export type Camera3DBlur = {
mode: Camera3DBlurMode;
strength: number;
falloff: number;
focusX: number;
focusY: number;
focusSize: number;
angle: number;
dirPosition: number;
bokeh: boolean;
};
export type Camera3DKeyframe = {
/** Seconds relative to the segment start. */
time: number;
value: number;
/** Bezier P1 for the span leaving this keyframe. */
outEasing: [number, number] | null;
/** Bezier P2 for the span entering this keyframe. */
inEasing: [number, number] | null;
};
export type Camera3DPropertyKey = keyof Camera3DProperties;
export type Camera3DBlurScalarKey =
| "strength"
| "falloff"
| "focusX"
| "focusY"
| "focusSize"
| "angle"
| "dirPosition";
export type Camera3DTrackKey =
| Camera3DPropertyKey
| "blurStrength"
| "blurFalloff"
| "blurFocusSize"
| "blurFocusX"
| "blurFocusY"
| "blurAngle"
| "blurDirPosition";
export type Camera3DTracks = Record<Camera3DTrackKey, Camera3DKeyframe[]>;
export type Camera3DSegment = {
start: number;
end: number;
enabled: boolean;
properties: Camera3DProperties;
blur: Camera3DBlur;
tracks: Camera3DTracks;
transitionIn: number;
transitionOut: number;
};
/**
* Segments cut straight into their pose: shots open already framed, and the
* renderer defaults to the same 0 (crates/rendering/src/camera3d.rs).
*/
export const DEFAULT_CAMERA3D_TRANSITION = 0;
/**
* Handles the renderer falls back to when a keyframe carries none: cubic
* ease-in-out. Mirrors `DEFAULT_OUT_EASING`/`DEFAULT_IN_EASING` in
* crates/rendering/src/camera3d.rs.
*/
export const DEFAULT_OUT_EASING: [number, number] = [0.65, 0];
export const DEFAULT_IN_EASING: [number, number] = [0.35, 1];
export const CAMERA3D_PROPERTY_KEYS = [
"tiltX",
"tiltY",
"roll",
"rotateX",
"rotateY",
"fov",
"zoom",
"panX",
"panY",
] as const satisfies readonly Camera3DPropertyKey[];
export const CAMERA3D_BLUR_SCALAR_KEYS = [
"strength",
"falloff",
"focusX",
"focusY",
"focusSize",
"angle",
"dirPosition",
] as const satisfies readonly Camera3DBlurScalarKey[];
export const CAMERA3D_TRACK_KEYS = [
"tiltX",
"tiltY",
"roll",
"rotateX",
"rotateY",
"fov",
"zoom",
"panX",
"panY",
"blurStrength",
"blurFalloff",
"blurFocusSize",
"blurFocusX",
"blurFocusY",
"blurAngle",
"blurDirPosition",
] as const satisfies readonly Camera3DTrackKey[];
export type Camera3DLimit = { min: number; max: number; step: number };
export const CAMERA3D_LIMITS = {
tiltX: { min: -70, max: 70, step: 1 },
tiltY: { min: -60, max: 60, step: 1 },
roll: { min: -180, max: 180, step: 1 },
rotateX: { min: -90, max: 90, step: 1 },
rotateY: { min: -50, max: 50, step: 1 },
fov: { min: 10, max: 100, step: 1 },
zoom: { min: 0.5, max: 10, step: 0.05 },
panX: { min: -3, max: 3, step: 0.01 },
panY: { min: -3, max: 3, step: 0.01 },
} satisfies Record<Camera3DPropertyKey, Camera3DLimit>;
export const CAMERA3D_BLUR_LIMITS = {
strength: { min: 0, max: 60, step: 1 },
falloff: { min: 0, max: 1, step: 0.01 },
focusX: { min: 0, max: 1, step: 0.01 },
focusY: { min: 0, max: 1, step: 0.01 },
focusSize: { min: 0, max: 1, step: 0.01 },
angle: { min: 0, max: 360, step: 1 },
dirPosition: { min: 0, max: 1, step: 0.01 },
} satisfies Record<Camera3DBlurScalarKey, Camera3DLimit>;
export const CAMERA3D_BOKEH_MAX_STRENGTH = 20;
/** Bokeh caps strength, and tilt shift narrows both the band and the angle. */
export const camera3dBlurLimit = (
key: Camera3DBlurScalarKey,
blur: Pick<Camera3DBlur, "mode" | "bokeh">,
): Camera3DLimit => {
switch (key) {
case "strength":
return {
min: 0,
max: blur.bokeh ? CAMERA3D_BOKEH_MAX_STRENGTH : 60,
step: 1,
};
case "focusSize":
return {
min: 0,
max: blur.mode === "tiltShift" ? 0.6 : 1,
step: 0.01,
};
case "angle":
return { min: 0, max: blur.mode === "tiltShift" ? 180 : 360, step: 1 };
default:
return CAMERA3D_BLUR_LIMITS[key];
}
};
export const CAMERA3D_TRANSITION_LIMITS = { min: 0, max: 2, step: 0.05 };
const clamp = (value: number, min: number, max: number) =>
Math.min(Math.max(value, min), max);
export const defaultCamera3DProperties = (): Camera3DProperties => ({
tiltX: 0,
tiltY: 0,
roll: 0,
rotateX: 0,
rotateY: 0,
fov: 45,
zoom: 2,
panX: 0,
panY: 0,
});
export const defaultCamera3DBlur = (): Camera3DBlur => ({
mode: "none",
strength: 0,
falloff: 0,
focusX: 0.37,
focusY: 0.5,
focusSize: 0.5,
angle: 0,
dirPosition: 0.5,
bokeh: false,
});
/**
* Blur a new segment opens with: a showcase defocus, so the cinematic look is
* there before anyone opens the Blur section.
*/
export const showcaseCamera3DBlur = (): Camera3DBlur => ({
mode: "radial",
strength: 19,
falloff: 0.62,
focusX: 0.37,
focusY: 0.5,
focusSize: 0.4,
angle: 0,
dirPosition: 0.5,
bokeh: true,
});
export const defaultCamera3DTracks = (): Camera3DTracks => ({
tiltX: [],
tiltY: [],
roll: [],
rotateX: [],
rotateY: [],
fov: [],
zoom: [],
panX: [],
panY: [],
blurStrength: [],
blurFalloff: [],
blurFocusSize: [],
blurFocusX: [],
blurFocusY: [],
blurAngle: [],
blurDirPosition: [],
});
/** Re-seeded parameters when the blur mode changes. */
export const CAMERA3D_BLUR_MODE_SEEDS: Record<
Camera3DBlurMode,
Partial<Record<Camera3DBlurScalarKey, number>>
> = {
none: {},
radial: { focusX: 0.37, focusY: 0.5, focusSize: 0.5 },
directional: { dirPosition: 0.5, angle: 0 },
tiltShift: { focusSize: 0.1, focusY: 0.5, angle: 45 },
};
// -----------------------------------------------------------------------------
// Presets
// -----------------------------------------------------------------------------
/**
* The seven values an angle preset writes. Content-plane rotation
* (rotateX/rotateY) is deliberately excluded: presets reframe the camera and
* leave whatever fold the user has dialled in alone.
*/
export const CAMERA3D_ANGLE_PRESET_KEYS = [
"tiltX",
"tiltY",
"roll",
"fov",
"zoom",
"panX",
"panY",
] as const;
export type Camera3DAnglePresetKey =
(typeof CAMERA3D_ANGLE_PRESET_KEYS)[number];
export type Camera3DAnglePreset = {
id: string;
name: string;
values: Record<Camera3DAnglePresetKey, number>;
/// Every card produces a moving shot: the shot opens on the named pose
/// (`values`) and drifts toward these overrides.
drift: Partial<Record<Camera3DAnglePresetKey, number>>;
/// The defocus the card writes alongside its move. A card is a complete
/// look, so clicking one never leaves the previous shot's blur behind.
blur: Camera3DBlur;
};
/**
* Detail's defocus: a tight, hard-edged focus spot over the close-up, taken
* from the reference project's opening shot.
*/
const detailCamera3DBlur = (): Camera3DBlur => ({
mode: "radial",
strength: 20,
falloff: 0.76,
focusX: 0.11,
focusY: 0.5,
focusSize: 0.18,
angle: 0,
dirPosition: 0.5,
bokeh: true,
});
/**
* The overhead shot's defocus: a wide, soft band low and left, taken from the
* reference project's middle shot.
*/
const overheadCamera3DBlur = (): Camera3DBlur => ({
mode: "radial",
strength: 18,
falloff: 0.72,
focusX: 0.03,
focusY: 0.36,
focusSize: 0.55,
angle: 0,
dirPosition: 0.5,
bokeh: true,
});
/// Cards carry the showcase defocus unless they were authored with their own.
const anglePreset = (
preset: Omit<Camera3DAnglePreset, "blur"> & { blur?: Camera3DBlur },
): Camera3DAnglePreset => ({
...preset,
blur: preset.blur ?? showcaseCamera3DBlur(),
});
export const ANGLE_PRESETS: Camera3DAnglePreset[] = [
anglePreset({
id: "spotlight",
name: "Spotlight",
values: {
tiltX: 0,
tiltY: 0,
roll: 0,
fov: 45,
zoom: 1.35,
panX: 0.39,
panY: -0.4,
},
// Slow push in with a slight rise.
drift: { zoom: 1.22, panY: -0.34 },
}),
anglePreset({
id: "perspective",
name: "Perspective",
values: {
tiltX: -28,
tiltY: 26,
roll: 5,
fov: 45,
zoom: 1.59,
panX: 0.37,
panY: -0.15,
},
// Orbit sweep.
drift: { tiltY: 18, zoom: 1.53 },
}),
anglePreset({
id: "center",
name: "Center",
values: {
tiltX: 0,
tiltY: 0,
roll: 0,
fov: 45,
zoom: 2,
panX: 0,
panY: 0,
},
// Slow pull back.
drift: { zoom: 2.25 },
}),
anglePreset({
id: "low-angle",
name: "Low angle",
values: {
tiltX: -50,
tiltY: 1,
roll: 0,
fov: 45,
zoom: 1.5,
panX: 0,
panY: 0,
},
// Low-angle rise.
drift: { tiltX: -44, panY: -0.12 },
}),
anglePreset({
id: "close-up",
name: "Close up",
values: {
tiltX: 26,
tiltY: -22,
roll: 1,
fov: 45,
zoom: 0.8,
panX: -0.3,
panY: -0.4,
},
// Truck across the close-up.
drift: { tiltY: -27, panX: -0.36 },
// The close-up is the one card that focuses tight and far left.
blur: detailCamera3DBlur(),
}),
];
export const anglePresetPose = (
preset: Camera3DAnglePreset,
): Camera3DProperties => ({
...defaultCamera3DProperties(),
...preset.values,
});
/// An angle preset as a motion template: opens on the named pose and drifts.
export const anglePresetMotion = (
preset: Camera3DAnglePreset,
): Camera3DMotionTemplate => ({
id: `angle-${preset.id}`,
name: preset.name,
from: anglePresetPose(preset),
to: { ...anglePresetPose(preset), ...preset.drift },
blur: { ...preset.blur },
});
// A slider cannot express anything finer than one step, so half a step is the
// tightest a pose can be "the same as" a preset and still be reachable.
const presetMatchEpsilon = (key: Camera3DPropertyKey) =>
Math.max(CAMERA3D_LIMITS[key].step / 2, 1e-4);
export type Camera3DMotionTemplate = {
id: string;
name: string;
from: Camera3DProperties;
to: Camera3DProperties;
/// The defocus the template writes. Clicking a card is a complete look, so
/// the blur is part of the template rather than whatever was there before.
blur: Camera3DBlur;
};
const pose = (overrides: Partial<Camera3DProperties>): Camera3DProperties => ({
...defaultCamera3DProperties(),
...overrides,
});
/// Templates carry the showcase defocus unless authored with their own.
const motionTemplate = (
template: Omit<Camera3DMotionTemplate, "blur"> & { blur?: Camera3DBlur },
): Camera3DMotionTemplate => ({
...template,
blur: template.blur ?? showcaseCamera3DBlur(),
});
export const MOTION_TEMPLATES: Camera3DMotionTemplate[] = [
motionTemplate({
id: "glide-across",
name: "Glide across",
from: pose({
tiltX: -46.65,
tiltY: 42.49,
rotateY: -20,
rotateX: -1,
zoom: 1.785,
fov: 24,
panX: 0.673,
panY: -0.133,
}),
to: pose({
tiltX: -46.65,
tiltY: 42.49,
rotateY: -20,
rotateX: -1,
zoom: 1.785,
fov: 24,
panX: 0.054,
panY: -0.31,
}),
}),
motionTemplate({
id: "drift-down",
name: "Drift down",
from: pose({ zoom: 0.8, fov: 45, panX: 0.536, panY: -0.452 }),
to: pose({ zoom: 0.8, fov: 45, panX: 0.544, panY: 0.5 }),
}),
motionTemplate({
id: "rising-sweep",
name: "Rising sweep",
from: pose({
tiltX: -57.83,
tiltY: -8.7,
rotateY: -16,
zoom: 1.51,
fov: 29,
panX: -0.634,
panY: -0.082,
}),
to: pose({
tiltX: -46.65,
tiltY: -7.94,
rotateY: -16,
zoom: 1.51,
fov: 25,
panX: -0.613,
panY: -0.268,
}),
}),
motionTemplate({
id: "pull-back",
name: "Pull back",
from: pose({ rotateX: -14, zoom: 0.715, fov: 45 }),
to: pose({ rotateX: -14, zoom: 2.1, fov: 45 }),
}),
motionTemplate({
id: "top-down",
name: "Top down",
from: pose({
tiltX: 24.8,
tiltY: 17.04,
rotateY: 18,
rotateX: -40,
zoom: 0.5,
fov: 60,
panX: -0.065,
panY: -0.195,
}),
to: pose({
tiltX: 34.19,
tiltY: 15.28,
rotateY: 9,
rotateX: -40,
zoom: 0.5,
fov: 60,
panX: -0.217,
panY: -0.476,
}),
// Looking down at the plane wants a wider, softer band than the rest.
blur: overheadCamera3DBlur(),
}),
motionTemplate({
id: "tilt-away",
name: "Tilt away",
from: pose({ rotateX: -5, zoom: 0.5, fov: 45 }),
to: pose({ rotateX: -21, zoom: 0.6, fov: 45 }),
}),
motionTemplate({
id: "unfold",
name: "Unfold",
from: pose({ rotateX: -42.96, zoom: 2.05, fov: 31 }),
to: pose({ rotateX: -12.01, zoom: 2, fov: 31, panY: -0.179 }),
}),
motionTemplate({
id: "slide-by",
name: "Slide by",
from: pose({
tiltX: -30.29,
tiltY: 60,
rotateY: -24,
rotateX: -39,
zoom: 1.99,
fov: 13,
panX: 0.238,
panY: 0.135,
}),
to: pose({
tiltX: -30.29,
tiltY: 60,
rotateY: -24,
rotateX: -39,
zoom: 1.99,
fov: 13,
panX: -0.204,
panY: 0.039,
}),
}),
];
export type Camera3DFlipAxis = "horizontal" | "vertical";
/**
* Mirrors the whole composition across the given axis while the content stays
* readable: negating the yaw/roll/pan family is exactly conjugating the
* camera by the mirror, so a "Close up" on the right becomes the identical
* shot on the left. Applies to both poses, every motion track, and the blur
* focus, so a moving shot keeps its drift.
*/
export const flipCamera3DSegment = (
segment: Camera3DSegment,
axis: Camera3DFlipAxis,
) => {
// Roll negates on both axes: a mirror reverses in-plane rotation.
const negated: Camera3DPropertyKey[] =
axis === "horizontal"
? ["tiltY", "rotateY", "roll", "panX"]
: ["tiltX", "rotateX", "roll", "panY"];
for (const key of negated) {
segment.properties[key] = -segment.properties[key];
for (const keyframe of segment.tracks[key])
keyframe.value = -keyframe.value;
}
const focusKey = axis === "horizontal" ? "focusX" : "focusY";
const focusTrack = axis === "horizontal" ? "blurFocusX" : "blurFocusY";
segment.blur[focusKey] = 1 - segment.blur[focusKey];
for (const keyframe of segment.tracks[focusTrack])
keyframe.value = 1 - keyframe.value;
// Directional/band angles mirror too: (cos, sin) reflected across the
// axis is 180 - a horizontally, -a vertically.
const mirrorAngle = (value: number) => {
const flipped = axis === "horizontal" ? 180 - value : -value;
return ((flipped % 360) + 360) % 360;
};
segment.blur.angle = mirrorAngle(segment.blur.angle);
for (const keyframe of segment.tracks.blurAngle)
keyframe.value = mirrorAngle(keyframe.value);
};
/**
* Replaces the segment's motion with the template's two poses. Linear is the
* explicit pair the template writes, so the move reads exactly as authored
* instead of picking up the default cubic ease.
*
* The template's defocus goes on with it: a card is one complete look, so what
* the preview promises is what the segment ends up holding.
*/
export const applyMotionTemplate = (
segment: Camera3DSegment,
template: Camera3DMotionTemplate,
) => {
setMotion(segment, template.from, template.to, LINEAR_MOTION_EASING);
segment.blur = { ...template.blur };
// A template owns the whole move, so the segment cuts in and out of it.
// Segments authored before the 0 default can still carry a ramp.
segment.transitionIn = 0;
segment.transitionOut = 0;
};
// -----------------------------------------------------------------------------
// Scenes
// -----------------------------------------------------------------------------
/**
* One shot of a scene: a move, a look, and the share of the scene's time range
* it holds. Weights are relative, so a scene reads the same whatever length it
* is dropped onto.
*/
export type Camera3DSceneShot = {
/** Fraction of the scene's time range. */
weight: number;
/** The card this shot was built from, when it came from one. */
name?: string;
from: Camera3DProperties;
to: Camera3DProperties;
blur: Camera3DBlur;
};
/** A chained multi-shot sequence: one click, several cuts. */
export type Camera3DScene = {
id: string;
name: string;
shots: Camera3DSceneShot[];
};
const anglePresetById = (id: string) =>
ANGLE_PRESETS.find((preset) => preset.id === id) ?? ANGLE_PRESETS[0];
const motionTemplateById = (id: string) =>
MOTION_TEMPLATES.find((template) => template.id === id) ??
MOTION_TEMPLATES[0];
/// A card's complete look as one shot of a scene.
const templateShot = (
template: Camera3DMotionTemplate,
weight: number,
): Camera3DSceneShot => ({
weight,
name: template.name,
from: { ...template.from },
to: { ...template.to },
blur: { ...template.blur },
});
export const CAMERA3D_SCENES: Camera3DScene[] = [
{
// Transcribed verbatim from the hand-built reference project: a tight
// close-up truck, a fold-down overhead sweep, then a long push in.
id: "showcase",
name: "Showcase",
shots: [
{
weight: 0.27,
from: pose({
tiltX: 26,
tiltY: -22,
roll: 1,
fov: 45,
zoom: 0.8,
panX: -0.3,
panY: -0.4,
}),
to: pose({
tiltX: 26,
tiltY: -27,
roll: 1,
fov: 45,
zoom: 0.8,
panX: -0.36,
panY: -0.4,
}),
blur: detailCamera3DBlur(),
},
{
weight: 0.25,
from: pose({
tiltX: 24.8,
tiltY: 17.04,
rotateX: -40,
rotateY: 18,
fov: 60,
zoom: 0.5,
panX: -0.065,
panY: -0.195,
}),
to: pose({
tiltX: 34.19,
tiltY: 15.28,
rotateX: -40,
rotateY: 9,
fov: 60,
zoom: 0.5,
panX: -0.217,
panY: -0.476,
}),
blur: overheadCamera3DBlur(),
},
{
weight: 0.48,
from: pose({ rotateX: -14, fov: 45, zoom: 0.715 }),
to: pose({ rotateX: -14, fov: 45, zoom: 1.6 }),
blur: {
mode: "radial",
strength: 19,
falloff: 0.67,
focusX: 0.37,
focusY: 0.52,
focusSize: 0.4,
angle: 0,
dirPosition: 0.5,
bokeh: true,
},
},
],
},
{
// Reveal, orbit, settle: the shape a product walkthrough wants.
id: "product-tour",
name: "Product tour",
shots: [
templateShot(motionTemplateById("unfold"), 0.3),
templateShot(anglePresetMotion(anglePresetById("perspective")), 0.3),
templateShot(anglePresetMotion(anglePresetById("center")), 0.4),
],
},
{
// Push in, hold on the detail, then release.
id: "punch-in",
name: "Punch in",
shots: [
templateShot(anglePresetMotion(anglePresetById("spotlight")), 0.3),
templateShot(anglePresetMotion(anglePresetById("close-up")), 0.3),
templateShot(motionTemplateById("pull-back"), 0.4),
],
},
];
export const CAMERA3D_SCENE_DESCRIPTIONS: Record<string, string> = {
showcase: "Close-up, overhead sweep, then zoom in",
"product-tour": "Reveal, orbit, then settle on your screen",
"punch-in": "Zoom into a detail, then pull back",
};
/**
* The shots an auto scene draws from, in order: the showcase, then the product
* tour, then the punch in. Asking for more shots simply reaches further down
* the list, so 4 shots is the 3-shot showcase plus the tour's opener.
*/
export const AUTO_SHOT_POOL: Camera3DSceneShot[] = [
...(CAMERA3D_SCENES.find((scene) => scene.id === "showcase")?.shots ?? []),
...(CAMERA3D_SCENES.find((scene) => scene.id === "product-tour")?.shots ??
[]),
...(CAMERA3D_SCENES.find((scene) => scene.id === "punch-in")?.shots ?? []),
];
/** How many shots the auto-scene pickers offer. */
export const MAX_AUTO_CAMERA3D_SHOTS = 6;
/**
* The scene an "Auto scene" of `count` shots lays down. One shot is the plain
* Glide across move; more than one takes the head of the pool with equal
* weights, so every shot gets the same share of the recording.
*/
export const autoCamera3DScene = (count: number): Camera3DScene => {
const wanted = Math.min(
Math.max(Math.floor(count), 1),
AUTO_SHOT_POOL.length,
);
const shots =
wanted === 1
? [templateShot(motionTemplateById("glide-across"), 1)]
: AUTO_SHOT_POOL.slice(0, wanted).map((shot) => ({
...shot,
weight: 1 / wanted,
}));
return { id: "auto", name: "Auto scene", shots };
};
/** How many shots this recording has room for at the one-second minimum. */
export const maxAutoCamera3DShots = (total: number) =>
Number.isFinite(total)
? Math.max(
0,
Math.min(
MAX_AUTO_CAMERA3D_SHOTS,
Math.floor(total / CAMERA3D_MIN_SHOT_DURATION),
),
)
: 0;
/**
* The scene's leading `count` shots with their weights renormalized, so a
* shorter sequence still fills the whole range it is laid onto. Asking for
* more shots than the scene holds simply returns the scene.
*/
export const sceneWithShotCount = (
scene: Camera3DScene,
count: number,
): Camera3DScene => {
const kept = Math.min(Math.max(Math.floor(count), 1), scene.shots.length);
if (kept >= scene.shots.length) return scene;
const shots = scene.shots.slice(0, kept);
const totalWeight = shots.reduce(
(sum, shot) => sum + Math.max(shot.weight, 0),
0,
);
return {
...scene,
shots: shots.map((shot) => ({
...shot,
weight:
totalWeight > 0
? Math.max(shot.weight, 0) / totalWeight
: 1 / shots.length,
})),
};
};
/**
* No generated shot is shorter than this: below a second a cut reads as a
* glitch rather than an edit.
*/
export const CAMERA3D_MIN_SHOT_DURATION = 1;
/** How long a shot the lane's "Add shot" affordances reach for. */
export const DEFAULT_CAMERA3D_SHOT_DURATION = 4;
/**
* Where a new shot goes. The playhead is a request, not a constraint: a click
* inside an existing shot lands in the next free space rather than doing
* nothing, which is the whole reason a second shot used to silently never
* appear.
*
* The gap holding `time` wins; failing that the first gap after it; failing
* that the first gap anywhere. Only a timeline with no gap left at all (every
* remaining hole shorter than a second) returns null, and the caller says so.
*/
export function placeCamera3DShot(
existing: readonly { start: number; end: number }[],
time: number,
duration: number,
total: number,
): { start: number; end: number } | null {
if (
![time, duration, total].every(Number.isFinite) ||
duration <= 0 ||
total <= 0
)
return null;
// A recording shorter than the minimum still deserves its one shot.
const minimum = Math.min(CAMERA3D_MIN_SHOT_DURATION, total);
const at = clamp(time, 0, total);
const taken = existing
.filter((segment) => segment.end > segment.start)
.slice()
.sort((a, b) => a.start - b.start);
const gaps: { start: number; end: number }[] = [];
let cursor = 0;
for (const segment of taken) {
if (segment.start > cursor)
gaps.push({ start: cursor, end: Math.min(segment.start, total) });
cursor = Math.max(cursor, segment.end);
if (cursor >= total) break;
}
if (cursor < total) gaps.push({ start: cursor, end: total });
const usable = gaps.filter((gap) => gap.end - gap.start >= minimum);
if (usable.length === 0) return null;
const holdsPlayhead = (gap: { start: number; end: number }) =>
at >= gap.start && at <= gap.end;
const gap =
usable.find(holdsPlayhead) ??
usable.find((candidate) => candidate.start >= at) ??
usable[0];
// The shot opens where it was asked for and runs until the gap closes, so
// the ghost shrinks as the space does. A gap the playhead is not in starts
// the shot at its own opening instead.
const start = holdsPlayhead(gap) ? at : gap.start;
const end = Math.min(start + duration, gap.end);
// Too little left to be a shot: slide back into the gap for the minimum.
if (end - start < minimum) return { start: gap.end - minimum, end: gap.end };
return { start, end };
}
/**
* The time to park the playhead on to see one end of a shot.
*
* The renderer floors the seek onto a frame, so asking for a start that falls
* between two frames shows the frame BEFORE the shot: the previous scene, not
* the opening pose. The start therefore rounds up to the first frame inside the
* shot, and the end rounds down to the last frame still inside it.
*/
export const camera3DPoseSeekTime = (
segment: { start: number; end: number },
end: boolean,
fps: number,
) => {
const rate = fps > 0 && Number.isFinite(fps) ? fps : 30;
// The epsilon absorbs the float error in a start that is already on a frame,
// and the floor at zero keeps a first shot off a negative -0 seek.
const startTime = Math.max(Math.ceil(segment.start * rate - 1e-6) / rate, 0);
if (!end) return startTime;
// A millisecond inside the end keeps the seek off the next shot's first frame.
return Math.max(Math.floor((segment.end - 1e-3) * rate) / rate, startTime);
};
/**
* How far a shot boundary will travel to land on a clip cut, as a fraction of
* the scene's range. Cutting the camera exactly where the footage cuts is what
* makes a generated sequence look authored.
*/
export const CAMERA3D_SCENE_SNAP_FRACTION = 0.15;
const nearestValue = (values: number[], target: number) => {
let nearest: number | null = null;
let distance = Number.POSITIVE_INFINITY;
for (const value of values) {
const candidate = Math.abs(value - target);
if (candidate >= distance) continue;
distance = candidate;
nearest = value;
}
return nearest;
};
/**
* Lays a scene across [start, end] as a chain of segments.
*
* Boundaries come from the shot weights, then each interior one looks for a
* clip cut to sit on. A snap is dropped rather than forced when it would push a
* shot under the minimum, and a range too short for the whole scene simply gets
* its leading shots.
*/
export const applySceneToRange = (
scene: Camera3DScene,
start: number,
end: number,
clipCuts: number[] = [],
): Camera3DSegment[] => {
const length = end - start;
if (!(length > 0) || scene.shots.length === 0) return [];
const shots = scene.shots.slice(
0,
Math.max(
1,
Math.min(
scene.shots.length,
Math.floor(length / CAMERA3D_MIN_SHOT_DURATION),
),
),
);
const totalWeight = shots.reduce(
(sum, shot) => sum + Math.max(shot.weight, 0),
0,
);
const share = (shot: Camera3DSceneShot) =>
totalWeight > 0 ? Math.max(shot.weight, 0) / totalWeight : 1 / shots.length;
const cuts = clipCuts.filter((cut) => cut > start && cut < end);
const snapWindow = length * CAMERA3D_SCENE_SNAP_FRACTION;
const boundaries = [start];
let cumulative = 0;
for (let index = 0; index < shots.length - 1; index++) {
cumulative += share(shots[index]);
// Every shot still to come needs its own minimum, so this boundary lives
// in whatever is left once they are reserved.
const min = boundaries[index] + CAMERA3D_MIN_SHOT_DURATION;
const max = end - (shots.length - 1 - index) * CAMERA3D_MIN_SHOT_DURATION;
const weighted = clamp(start + length * cumulative, min, max);
const cut = nearestValue(cuts, weighted);
boundaries.push(
cut !== null &&
Math.abs(cut - weighted) <= snapWindow &&
cut >= min &&
cut <= max
? cut
: weighted,
);
}
boundaries.push(end);
return shots.map((shot, index) => {
const segment: Camera3DSegment = {
start: boundaries[index],
end: boundaries[index + 1],
enabled: true,
properties: defaultCamera3DProperties(),
blur: { ...shot.blur },
tracks: defaultCamera3DTracks(),
transitionIn: 0,
transitionOut: 0,
};
setMotion(segment, shot.from, shot.to, LINEAR_MOTION_EASING);
return segment;
});
};
/** Pose the "Reset camera" action writes: a canonical long lens. */
export const CAMERA3D_RESET_POSE: Camera3DProperties = {
tiltX: 0,
tiltY: 0,
roll: 0,
rotateX: 0,
rotateY: 0,
fov: 24,
zoom: 4.5,
panX: 0,
panY: 0,
};
// -----------------------------------------------------------------------------
// Motion easings
// -----------------------------------------------------------------------------
/**
* One named curve for the whole move: the pair of split bezier handles the two
* keyframes carry. There is no per-keyframe easing to pick any more, because a
* segment only ever holds one span.
*/
export type Camera3DMotionEasing = {
id: string;
label: string;
/** Bezier P1, written onto the start keyframe. */
out: [number, number];
/** Bezier P2, written onto the end keyframe. */
in: [number, number];
};
export const MOTION_EASINGS: Camera3DMotionEasing[] = [
// Linear is the default: it is what every template is authored in.
{ id: "linear", label: "Linear", out: [0, 0], in: [1, 1] },
{ id: "smooth", label: "Smooth", out: [0.65, 0], in: [0.35, 1] },
{ id: "easeIn", label: "Ease in", out: [0.32, 0], in: [1, 1] },
{ id: "easeOut", label: "Ease out", out: [0, 0], in: [0.68, 1] },
];
export const LINEAR_MOTION_EASING = MOTION_EASINGS[0];
// -----------------------------------------------------------------------------
// Normalization
// -----------------------------------------------------------------------------
export const normalizeCamera3DProperties = (
properties?: RawCamera3DProperties | null,
): Camera3DProperties => {
const defaults = defaultCamera3DProperties();
if (!properties) return defaults;
return {
tiltX: properties.tiltX ?? defaults.tiltX,
tiltY: properties.tiltY ?? defaults.tiltY,
roll: properties.roll ?? defaults.roll,
rotateX: properties.rotateX ?? defaults.rotateX,
rotateY: properties.rotateY ?? defaults.rotateY,
fov: properties.fov ?? defaults.fov,
zoom: properties.zoom ?? defaults.zoom,
panX: properties.panX ?? defaults.panX,
panY: properties.panY ?? defaults.panY,
};
};
export const normalizeCamera3DBlur = (
blur?: RawCamera3DBlur | null,
): Camera3DBlur => {
const defaults = defaultCamera3DBlur();
if (!blur) return defaults;
return {
mode: blur.mode ?? defaults.mode,
strength: blur.strength ?? defaults.strength,
falloff: blur.falloff ?? defaults.falloff,
focusX: blur.focusX ?? defaults.focusX,
focusY: blur.focusY ?? defaults.focusY,
focusSize: blur.focusSize ?? defaults.focusSize,
angle: blur.angle ?? defaults.angle,
dirPosition: blur.dirPosition ?? defaults.dirPosition,
bokeh: blur.bokeh ?? defaults.bokeh,
};
};
const normalizeKeyframes = (
keyframes?: RawCamera3DKeyframe[] | null,
): Camera3DKeyframe[] =>
(keyframes ?? [])
.map((keyframe) => ({
time: keyframe.time,
value: keyframe.value,
outEasing: keyframe.outEasing ?? null,
inEasing: keyframe.inEasing ?? null,
}))
.sort((a, b) => a.time - b.time);
export const normalizeCamera3DTracks = (
tracks?: RawCamera3DTracks | null,
): Camera3DTracks => {
const normalized = defaultCamera3DTracks();
if (!tracks) return normalized;
for (const key of CAMERA3D_TRACK_KEYS) {
normalized[key] = normalizeKeyframes(tracks[key]);
}
return normalized;
};
/**
* Motion always spans the whole segment in the start/end model, so after a
* resize (or when loading a project resized before this invariant existed)
* every track's keyframe times are rescaled onto the new duration. Repeated
* application is a fixpoint, so calling it during a live drag is safe.
*/
export const fitCamera3DMotionToSegment = (segment: Camera3DSegment) => {
const length = Math.max(segment.end - segment.start, 0);
let span = 0;
for (const key of CAMERA3D_TRACK_KEYS)
for (const keyframe of segment.tracks[key])
span = Math.max(span, keyframe.time);
if (span < 1e-6 || Math.abs(span - length) < 1e-6) return;
const scale = length / span;
for (const key of CAMERA3D_TRACK_KEYS)
for (const keyframe of segment.tracks[key]) keyframe.time *= scale;
};
export const normalizeCamera3DSegments = (
segments?: RawCamera3DSegment[] | null,
): Camera3DSegment[] =>
(segments ?? [])
.map((segment) => {
const normalized = {
start: segment.start,
end: segment.end,
enabled: segment.enabled ?? true,
properties: normalizeCamera3DProperties(segment.properties),
blur: normalizeCamera3DBlur(segment.blur),
tracks: normalizeCamera3DTracks(segment.tracks),
transitionIn: segment.transitionIn ?? DEFAULT_CAMERA3D_TRANSITION,
transitionOut: segment.transitionOut ?? DEFAULT_CAMERA3D_TRANSITION,
};
fitCamera3DMotionToSegment(normalized);
return normalized;
})
.sort((a, b) => a.start - b.start || a.end - b.end);
export const defaultCamera3DSegment = (
start: number,
end: number,
): Camera3DSegment => {
const angled =
ANGLE_PRESETS.find((preset) => preset.id === "perspective") ??
ANGLE_PRESETS[0];
return {
start,
end,
enabled: true,
// New segments open on a real pose so the 3D look is visible immediately.
properties: anglePresetPose(angled),
blur: showcaseCamera3DBlur(),
tracks: defaultCamera3DTracks(),
transitionIn: DEFAULT_CAMERA3D_TRANSITION,
transitionOut: DEFAULT_CAMERA3D_TRANSITION,
};
};
/**
* The shot every "Add shot" affordance creates: a complete Glide across look,
* so a new shot plays as a real move the moment it lands on the track.
*/
export const newCamera3DShot = (
start: number,
end: number,
): Camera3DSegment => {
const segment = defaultCamera3DSegment(start, end);
applyMotionTemplate(segment, motionTemplateById("glide-across"));
return segment;
};
// -----------------------------------------------------------------------------
// Sampling (mirrors crates/rendering/src/camera3d.rs)
// -----------------------------------------------------------------------------
const bezierComponent = (p1: number, p2: number, t: number) => {
const inv = 1 - t;
return 3 * inv * inv * t * p1 + 3 * inv * t * t * p2 + t * t * t;
};
const bezierDerivative = (p1: number, p2: number, t: number) => {
const a = 1 - 3 * p2 + 3 * p1;
const b = 3 * p2 - 6 * p1;
const c = 3 * p1;
return (3 * a * t + 2 * b) * t + c;
};
/**
* Cubic-bezier timing with control points P1/P2 (P0 = (0,0), P3 = (1,1)):
* 8 Newton iterations, then bisection.
*/
export const bezierEase = (
p1: readonly [number, number],
p2: readonly [number, number],
t: number,
) => {
if (t <= 0) return 0;
if (t >= 1) return 1;
const [x1, y1] = p1;
const [x2, y2] = p2;
// Linear fast path ([0,0]/[1,1] handles).
if (x1 === y1 && x2 === y2 && x1 === 0 && x2 === 1) return t;
let guess = t;
for (let i = 0; i < 8; i++) {
const error = bezierComponent(x1, x2, guess) - t;
if (Math.abs(error) < 1e-5) return bezierComponent(y1, y2, guess);
const slope = bezierDerivative(x1, x2, guess);
if (Math.abs(slope) < 1e-6) break;
guess -= error / slope;
}
let lo = 0;
let hi = 1;
guess = t;
for (let i = 0; i < 30; i++) {
const error = bezierComponent(x1, x2, guess) - t;
if (Math.abs(error) < 1e-5) break;
if (error > 0) hi = guess;
else lo = guess;
guess = (lo + hi) / 2;
}
return bezierComponent(y1, y2, guess);
};
const sortedByTime = (keys: Camera3DKeyframe[]) => {
for (let i = 1; i < keys.length; i++) {
if (keys[i].time < keys[i - 1].time)
return [...keys].sort((a, b) => a.time - b.time);
}
return keys;
};
/**
* Samples one per-property track: base value when empty, hold outside the keyed
* range, split-handle bezier lerp between neighbours.
*/
export const sampleTrack = (
base: number,
keys: Camera3DKeyframe[] | null | undefined,
time: number,
) => {
const list = keys ?? [];
if (list.length === 0) return base;
const sorted = sortedByTime(list);
if (time <= sorted[0].time) return sorted[0].value;
for (let i = 1; i < sorted.length; i++) {
const prev = sorted[i - 1];
const next = sorted[i];
if (time > next.time) continue;
const span = Math.max(next.time - prev.time, 1e-6);
const progress = clamp((time - prev.time) / span, 0, 1);
const eased = bezierEase(
prev.outEasing ?? DEFAULT_OUT_EASING,
next.inEasing ?? DEFAULT_IN_EASING,
progress,
);
return prev.value + (next.value - prev.value) * eased;
}
return sorted[sorted.length - 1].value;
};
export const evaluatePose = (
segment: Camera3DSegment,
relativeTime: number,
): Camera3DProperties => {
const base = segment.properties;
const tracks = segment.tracks;
return {
tiltX: sampleTrack(base.tiltX, tracks.tiltX, relativeTime),
tiltY: sampleTrack(base.tiltY, tracks.tiltY, relativeTime),
roll: sampleTrack(base.roll, tracks.roll, relativeTime),
rotateX: sampleTrack(base.rotateX, tracks.rotateX, relativeTime),
rotateY: sampleTrack(base.rotateY, tracks.rotateY, relativeTime),
fov: sampleTrack(base.fov, tracks.fov, relativeTime),
zoom: sampleTrack(base.zoom, tracks.zoom, relativeTime),
panX: sampleTrack(base.panX, tracks.panX, relativeTime),
panY: sampleTrack(base.panY, tracks.panY, relativeTime),
};
};
export const evaluateBlur = (
segment: Camera3DSegment,
relativeTime: number,
): Camera3DBlur => {
const base = segment.blur;
const tracks = segment.tracks;
return {
mode: base.mode,
bokeh: base.bokeh,
strength: sampleTrack(base.strength, tracks.blurStrength, relativeTime),
falloff: sampleTrack(base.falloff, tracks.blurFalloff, relativeTime),
focusX: sampleTrack(base.focusX, tracks.blurFocusX, relativeTime),
focusY: sampleTrack(base.focusY, tracks.blurFocusY, relativeTime),
focusSize: sampleTrack(base.focusSize, tracks.blurFocusSize, relativeTime),
angle: sampleTrack(base.angle, tracks.blurAngle, relativeTime),
dirPosition: sampleTrack(
base.dirPosition,
tracks.blurDirPosition,
relativeTime,
),
};
};
// -----------------------------------------------------------------------------
// Start pose / end pose
// -----------------------------------------------------------------------------
/**
* Below this a move is a hold: nothing a slider can express is finer, so two
* poses this close are stored as a still shot with no keyframes at all.
*/
export const MOTION_STILL_EPSILON = 1e-4;
/** The pose the segment opens on, whatever form its tracks are stored in. */
export const getStartPose = (segment: Camera3DSegment): Camera3DProperties =>
evaluatePose(segment, 0);
/** The pose the segment lands on, whatever form its tracks are stored in. */
export const getEndPose = (segment: Camera3DSegment): Camera3DProperties =>
evaluatePose(segment, Math.max(segment.end - segment.start, 0));
export const camera3DPosesEqual = (
a: Camera3DProperties,
b: Camera3DProperties,
) =>
CAMERA3D_PROPERTY_KEYS.every(
(key) => Math.abs(a[key] - b[key]) < MOTION_STILL_EPSILON,
);
/** Whether any camera property is animated. Blur is never keyed. */
export const hasCamera3DMotion = (segment: Camera3DSegment) =>
CAMERA3D_PROPERTY_KEYS.some((key) => segment.tracks[key].length > 0);
/** The card a shot currently reads as: one of the Moves, or one of the Angles. */
export type Camera3DLook = {
kind: "move" | "angle";
id: string;
name: string;
};
const posesMatchWithinStep = (a: Camera3DProperties, b: Camera3DProperties) =>
CAMERA3D_PROPERTY_KEYS.every(
(key) => Math.abs(a[key] - b[key]) <= presetMatchEpsilon(key),
);
/**
* Which card wrote this shot, read back off its two poses. Both ends have to
* match, so a shot that was nudged after the click stops claiming the card.
* Blur is deliberately not part of the match: it is the one part of a look the
* panel lets you dial without leaving the look.
*/
export const matchCamera3DLook = (
segment: Camera3DSegment,
): Camera3DLook | null => {
const start = getStartPose(segment);
const end = getEndPose(segment);
const move = MOTION_TEMPLATES.find(
(template) =>
posesMatchWithinStep(start, template.from) &&
posesMatchWithinStep(end, template.to),
);
if (move) return { kind: "move", id: move.id, name: move.name };
const angle = ANGLE_PRESETS.find((preset) => {
const motion = anglePresetMotion(preset);
return (
posesMatchWithinStep(start, motion.from) &&
posesMatchWithinStep(end, motion.to)
);
});
if (angle) return { kind: "angle", id: angle.id, name: angle.name };
return null;
};
/** What the timeline segment and the panel header call this shot. */
export const camera3DShotLabel = (segment: Camera3DSegment) =>
matchCamera3DLook(segment)?.name ??
(hasCamera3DMotion(segment) ? "Custom move" : "Still shot");
/**
* The one way the editor authors camera animation: a segment is a start pose
* and an end pose, and this writes that pair into the per-property tracks the
* renderer reads. A property that does not move keeps no keyframes at all, so
* a still shot stores as a plain base pose.
*
* Blur is never touched here: it is segment-level and static.
*
* An older segment carrying a richer track flattens to this form on its first
* edit, which is intended: it flattens onto the poses it already opened and
* closed on.
*/
export const setMotion = (
segment: Camera3DSegment,
start: Camera3DProperties,
end: Camera3DProperties,
easing: Camera3DMotionEasing = LINEAR_MOTION_EASING,
) => {
const length = Math.max(segment.end - segment.start, 0);
for (const key of CAMERA3D_PROPERTY_KEYS) {
const from = start[key];
const to = end[key];
// The base pose always carries the start: it is what shows when the track
// is empty, and what the renderer holds outside the keyed range.
segment.properties[key] = from;
if (Math.abs(from - to) < MOTION_STILL_EPSILON) {
segment.tracks[key] = [];
continue;
}
segment.tracks[key] = [
{ time: 0, value: from, outEasing: [...easing.out], inEasing: null },
{ time: length, value: to, outEasing: null, inEasing: [...easing.in] },
];
}
};
const EASING_MATCH_EPSILON = 1e-3;
const handlesMatch = (
a: readonly [number, number],
b: readonly [number, number],
) =>
Math.abs(a[0] - b[0]) <= EASING_MATCH_EPSILON &&
Math.abs(a[1] - b[1]) <= EASING_MATCH_EPSILON;
/**
* The curve the segment's move runs on, read back off its first animated camera
* track. Anything unrecognised (a hand-keyed segment from before this model)
* reads as Linear, and picking a style rewrites both handles anyway.
*/
export const getMotionEasing = (
segment: Camera3DSegment,
): Camera3DMotionEasing => {
for (const key of CAMERA3D_PROPERTY_KEYS) {
const track = segment.tracks[key];
if (track.length < 2) continue;
const out = track[0].outEasing ?? DEFAULT_OUT_EASING;
const into = track[track.length - 1].inEasing ?? DEFAULT_IN_EASING;
return (
MOTION_EASINGS.find(
(easing) =>
handlesMatch(easing.out, out) && handlesMatch(easing.in, into),
) ?? LINEAR_MOTION_EASING
);
}
return LINEAR_MOTION_EASING;
};
/** Retimes every track when the segment's length changes. */
export const scaleKeyframeTimes = (tracks: Camera3DTracks, scale: number) => {
for (const key of CAMERA3D_TRACK_KEYS) {
for (const keyframe of tracks[key]) keyframe.time *= scale;
}
};
// -----------------------------------------------------------------------------
// CSS 3D preview
// -----------------------------------------------------------------------------
/**
* Scale constant: the Flat preset (zoom 2, fov 45) lands at roughly 60% of the
* preview card, which leaves room for the poses that push in closer.
*/
export const CAMERA3D_PREVIEW_SCALE_K = 0.5;
/**
* A CSS-3D preview of a pose. The perspective distance reproduces the field
* of view at this card height, the rotations run camera-then-plane in the
* renderer's order, and apparent size follows 1 / (zoom * tan(fov/2)) exactly
* like the real projection. Pan uses half the projected offset so the extreme
* poses stay legible inside a thumbnail.
*/
export const cssPreviewTransform = (
props: Camera3DProperties,
containerHeightPx: number,
) => {
const tan = Math.tan((clamp(props.fov, 1, 179) * Math.PI) / 360);
const zoom = Math.max(props.zoom, 0.05);
const scale = CAMERA3D_PREVIEW_SCALE_K / (zoom * tan);
const offset = (containerHeightPx / 2) * scale;
const tx = props.panX * offset;
const ty = -props.panY * offset;
return {
perspective: containerHeightPx / (2 * tan),
transform: [
`translate(${tx.toFixed(2)}px, ${ty.toFixed(2)}px)`,
`rotateY(${props.tiltY}deg)`,
`rotateX(${-props.tiltX}deg)`,
`rotateZ(${props.roll}deg)`,
`rotateY(${props.rotateY}deg)`,
`rotateX(${-props.rotateX}deg)`,
`scale(${scale.toFixed(4)})`,
].join(" "),
};
};