Skip to content

armgit / Cap

Public Imported from GitHub
0

Open source Loom alternative. Beautiful, shareable screen recordings.

ci(linux-harness): record the virtual camera as YUYV, NV12 and MJPEG

Richie McIlroy5569c7ecd8d3
diff --git a/.github/workflows/linux-desktop-reliability.yml b/.github/workflows/linux-desktop-reliability.yml
index 4e725cfba..e933f9366 100644
--- a/.github/workflows/linux-desktop-reliability.yml
+++ b/.github/workflows/linux-desktop-reliability.yml
@@ -408,9 +408,14 @@ jobs:
run: |
sudo apt-get install -y -qq "linux-headers-$(uname -r)" v4l2loopback-dkms xvfb xdotool ffmpeg dbus >/dev/null
chmod +x "$RUNNER_TEMP/build/cap-gpui"
- sudo install -d -o "$(id -u)" -g "$(id -g)" "$RUNNER_TEMP/out/x11-camera"
- bash scripts/linux-desktop-harness/x11-camera.sh "$RUNNER_TEMP/build/cap-gpui" "$RUNNER_TEMP/build/libs" \
- "$RUNNER_TEMP/out/x11-camera"
+ # Each format Cap's Linux camera path converts: packed YUYV, NV12 and
+ # MJPEG (decoded before use).
+ for format in yuyv422 nv12 mjpeg; do
+ dir="$RUNNER_TEMP/out/x11-camera-$format"
+ sudo install -d -o "$(id -u)" -g "$(id -g)" "$dir"
+ CAMERA_FORMAT=$format bash scripts/linux-desktop-harness/x11-camera.sh \
+ "$RUNNER_TEMP/build/cap-gpui" "$RUNNER_TEMP/build/libs" "$dir"
+ done
- name: Hyprland area recording
run: |
diff --git a/scripts/linux-desktop-harness/README.md b/scripts/linux-desktop-harness/README.md
index 42e7d24a1..af183b426 100644
--- a/scripts/linux-desktop-harness/README.md
+++ b/scripts/linux-desktop-harness/README.md
@@ -85,7 +85,8 @@ real login activates.
- `x11-camera.sh <cap-gpui> <ffmpeg lib dir> <out-dir>` records the display on
Xvfb (X11 capture, no portal) with a camera: a v4l2loopback device that
- ffmpeg feeds a 1280x720 test pattern. Cap waits for the Stop shortcut to start
+ ffmpeg feeds a 1280x720 test pattern, as YUYV, NV12 or MJPEG
+ (`CAMERA_FORMAT`; CI runs all three). Cap waits for the Stop shortcut to start
and to stop, pressed with real X input (xdotool), well before its 60 s
automatic stop. It checks the camera track is 1280x720 and as long as the
display track, about five seconds, and fails if any result is missing. It
diff --git a/scripts/linux-desktop-harness/x11-camera.sh b/scripts/linux-desktop-harness/x11-camera.sh
index 3721b6215..c04f19127 100755
--- a/scripts/linux-desktop-harness/x11-camera.sh
+++ b/scripts/linux-desktop-harness/x11-camera.sh
@@ -1,5 +1,7 @@
#!/usr/bin/env bash
# Usage: x11-camera.sh <cap-gpui> <ffmpeg lib dir> <out-dir>
+# CAMERA_FORMAT picks what the virtual camera sends: yuyv422 (default), nv12
+# or mjpeg, the three formats Cap's Linux camera path converts.
set -uo pipefail
for tool in Xvfb xdotool ffmpeg ffprobe; do
command -v "$tool" >/dev/null || { echo "install xvfb, xdotool and ffmpeg" >&2; exit 2; }
@@ -12,12 +14,20 @@ mkdir -p "$out" && : >"$out/result.txt" || { echo "x11-camera: cannot write to $
result() { printf '%s=%s\n' "$1" "$2" >>"$out/result.txt"; }
device=/dev/video42
+format=${CAMERA_FORMAT:-yuyv422}
+case $format in
+ yuyv422|nv12) encode=(-pix_fmt "$format") ;;
+ mjpeg) encode=(-pix_fmt yuvj422p -c:v mjpeg -q:v 4) ;;
+ *) echo "x11-camera: unknown CAMERA_FORMAT $format" >&2; exit 2 ;;
+esac
+# A fresh device per run, so the format of an earlier run cannot stick.
+sudo modprobe -r v4l2loopback 2>/dev/null
sudo modprobe v4l2loopback video_nr=42 card_label="Cap Test Camera" exclusive_caps=1 || exit 2
# udev applies its own mode to the new node after modprobe returns; let it
# finish first so it cannot reset the chmod below.
sudo udevadm settle --timeout=10
sudo chmod 666 "$device"
-ffmpeg -hide_banner -loglevel error -nostdin -re -f lavfi -i testsrc2=size=1280x720:rate=30 -pix_fmt yuyv422 \
+ffmpeg -hide_banner -loglevel error -nostdin -re -f lavfi -i testsrc2=size=1280x720:rate=30 "${encode[@]}" \
-f v4l2 "$device" >"$out/feeder.log" 2>&1 &
feeder=$!
unset WAYLAND_DISPLAY
@@ -26,7 +36,7 @@ Xvfb "$DISPLAY" -screen 0 1920x1080x24 >/dev/null 2>&1 &
xvfb=$!
trap 'kill $feeder $xvfb 2>/dev/null' EXIT
sleep 2
-echo "feeder: $(kill -0 $feeder 2>/dev/null && echo running || echo exited) $(head -c 300 "$out/feeder.log")" >>"$out/actions.log"
+echo "feeder ($format): $(kill -0 $feeder 2>/dev/null && echo running || echo exited) $(head -c 300 "$out/feeder.log")" >>"$out/actions.log"
profile=$out/profile
log=$out/cap.log