Skip to content

A Hardware Hacking Tool with Web-Based CLI That Speaks Every Protocol

10.5 KB
Raw Blame
// LiquidCrystal_I2C.hpp
// Based on the work by DFRobot
/*
 * Extensions made by AJ 2023
 * Removed Arduino 0.x support
 * Added SoftI2CMaste support, which drastically reduces program size.
 * Added OLED stuff
 * Added createChar() with PROGMEM input
 * Added fast timing
 */
#ifndef _LIQUID_CRYSTAL_I2C_HPP
#define _LIQUID_CRYSTAL_I2C_HPP

#include "Arduino.h"

#if defined(__AVR__) && !defined(USE_SOFT_I2C_MASTER) && __has_include("SoftI2CMasterConfig.h")
#define USE_SOFT_I2C_MASTER // must be before #include "LiquidCrystal_I2C.h"
#endif

#include "LiquidCrystal_I2C.h"
#include <inttypes.h>

inline size_t LiquidCrystal_I2C::write(uint8_t value) {
    send(value, Rs);
    return 1;
}

#if defined(USE_SOFT_I2C_MASTER)
//#define USE_SOFT_I2C_MASTER_H_AS_PLAIN_INCLUDE
#include "SoftI2CMasterConfig.h"    // Include configuration for sources
#include "SoftI2CMaster.h"          // include sources
#elif defined(USE_SOFT_WIRE)
#define USE_SOFTWIRE_H_AS_PLAIN_INCLUDE
#include "SoftWire.h"
#endif

#if defined(__AVR__)
/*
 * The datasheet says: a command need > 37us to settle. Enable pulse must be > 450ns.
 * Use no delay for enable pulse after each command,
 * because the overhead of this library seems to be using the 37 us and 450 ns.
 * At least it works perfectly for all my LCD's connected to Uno, Nano etc.
 * and it saves a lot of time in realtime applications using LCD as display,
 * like https://github.com/ArminJo/Arduino-DTSU666H_PowerMeter
 */
#define USE_FAST_TIMING
#endif

// When the display powers up, it is configured as follows:
//
// 1. Display clear
// 2. Function set:
//    DL = 1; 8-bit interface data
//    N = 0; 1-line display
//    F = 0; 5x8 dot character font
// 3. Display on/off control:
//    D = 0; Display off
//    C = 0; Cursor off
//    B = 0; Blinking off
// 4. Entry mode set:
//    I/D = 1; Increment by 1
//    S = 0; No shift
//
// Note, however, that resetting the Arduino doesn't reset the LCD, so we
// can't assume that its in that state when a sketch starts (and the
// LiquidCrystal constructor is called).

LiquidCrystal_I2C::LiquidCrystal_I2C(uint8_t lcd_Addr, uint8_t lcd_cols, uint8_t lcd_rows) {
    _Addr = lcd_Addr;
    _cols = lcd_cols;
    _rows = lcd_rows;
    _backlightval = LCD_NOBACKLIGHT;
    _oled = false;
}

void LiquidCrystal_I2C::oled_init() {
    _oled = true;
    init_priv();
}

void LiquidCrystal_I2C::init() {
    init_priv();
}

void LiquidCrystal_I2C::init_priv() {
#if defined(USE_SOFT_I2C_MASTER)
    i2c_init();
#else
    Wire.begin();
#endif
    _displayfunction = LCD_4BITMODE | LCD_1LINE | LCD_5x8DOTS;
    begin(_cols, _rows);
}

void LiquidCrystal_I2C::begin(uint8_t cols __attribute__((unused)), uint8_t lines, uint8_t dotsize) {
    if (lines > 1) {
        _displayfunction |= LCD_2LINE;
    }
    _numlines = lines;

    // for some 1 line displays you can select a 10 pixel high font
    if ((dotsize != 0) && (lines == 1)) {
        _displayfunction |= LCD_5x10DOTS;
    }

    // SEE PAGE 45/46 FOR INITIALIZATION SPECIFICATION!
    // according to datasheet, we need at least 40ms after power rises above 2.7V
    // before sending commands. Arduino can turn on way before 4.5V so we'll wait 50
    delay(50);

    // Now we pull both RS and R/W low to begin commands
    expanderWrite(_backlightval);	// reset expander and turn backlight off (Bit 8 =1)
    delay(1000);

    //put the LCD into 4 bit mode
    // this is according to the hitachi HD44780 datasheet
    // figure 24, pg 46

    // we start in 8bit mode, try to set 4 bit mode
    write4bits(0x03 << 4);
    delayMicroseconds(4500); // wait min 4.1ms

    // second try
    write4bits(0x03 << 4);
    delayMicroseconds(4500); // wait min 4.1ms

    // third go!
    write4bits(0x03 << 4);
    delayMicroseconds(150);

    // finally, set to 4-bit interface
    write4bits(0x02 << 4);

    // set # lines, font size, etc.
    command(LCD_FUNCTIONSET | _displayfunction);

    // turn the display on with no cursor or blinking default
    _displaycontrol = LCD_DISPLAYON | LCD_CURSOROFF | LCD_BLINKOFF;
    display();

    // clear it off
    clear();

    // Initialize to default text direction (for roman languages)
    _displaymode = LCD_ENTRYLEFT | LCD_ENTRYSHIFTDECREMENT;

    // set the entry mode
    command(LCD_ENTRYMODESET | _displaymode);

    home();

}

/********** high level commands, for the user! */
void LiquidCrystal_I2C::clear() {
    command(LCD_CLEARDISPLAY); // clear display, set cursor position to zero
#if defined(USE_FAST_TIMING)
    delayMicroseconds(1500);  // this command takes a long time! // AJ 20.9.23 1200 is too short for my 2004 LCD's, 1400 is OK
#else
    delayMicroseconds(2000);  // this command takes a long time!
#endif
    if (_oled)
        setCursor(0, 0);
}

void LiquidCrystal_I2C::home() {
    command(LCD_RETURNHOME);  // set cursor position to zero
    delayMicroseconds(2000);  // this command takes a long time!
}

void LiquidCrystal_I2C::setCursor(uint8_t col, uint8_t row) {
    int row_offsets[] = { 0x00, 0x40, 0x14, 0x54 };
    if (row > _numlines) {
        row = _numlines - 1;    // we count rows starting w/0
    }
    command(LCD_SETDDRAMADDR | (col + row_offsets[row]));
}

// Turn the display on/off (quickly)
void LiquidCrystal_I2C::noDisplay() {
    _displaycontrol &= ~LCD_DISPLAYON;
    command(LCD_DISPLAYCONTROL | _displaycontrol);
}
void LiquidCrystal_I2C::display() {
    _displaycontrol |= LCD_DISPLAYON;
    command(LCD_DISPLAYCONTROL | _displaycontrol);
}

// Turns the underline cursor on/off
void LiquidCrystal_I2C::noCursor() {
    _displaycontrol &= ~LCD_CURSORON;
    command(LCD_DISPLAYCONTROL | _displaycontrol);
}
void LiquidCrystal_I2C::cursor() {
    _displaycontrol |= LCD_CURSORON;
    command(LCD_DISPLAYCONTROL | _displaycontrol);
}

// Turn on and off the blinking cursor
void LiquidCrystal_I2C::noBlink() {
    _displaycontrol &= ~LCD_BLINKON;
    command(LCD_DISPLAYCONTROL | _displaycontrol);
}
void LiquidCrystal_I2C::blink() {
    _displaycontrol |= LCD_BLINKON;
    command(LCD_DISPLAYCONTROL | _displaycontrol);
}

// These commands scroll the display without changing the RAM
void LiquidCrystal_I2C::scrollDisplayLeft(void) {
    command(LCD_CURSORSHIFT | LCD_DISPLAYMOVE | LCD_MOVELEFT);
}
void LiquidCrystal_I2C::scrollDisplayRight(void) {
    command(LCD_CURSORSHIFT | LCD_DISPLAYMOVE | LCD_MOVERIGHT);
}

// This is for text that flows Left to Right
void LiquidCrystal_I2C::leftToRight(void) {
    _displaymode |= LCD_ENTRYLEFT;
    command(LCD_ENTRYMODESET | _displaymode);
}

// This is for text that flows Right to Left
void LiquidCrystal_I2C::rightToLeft(void) {
    _displaymode &= ~LCD_ENTRYLEFT;
    command(LCD_ENTRYMODESET | _displaymode);
}

// This will 'right justify' text from the cursor
void LiquidCrystal_I2C::autoscroll(void) {
    _displaymode |= LCD_ENTRYSHIFTINCREMENT;
    command(LCD_ENTRYMODESET | _displaymode);
}

// This will 'left justify' text from the cursor
void LiquidCrystal_I2C::noAutoscroll(void) {
    _displaymode &= ~LCD_ENTRYSHIFTINCREMENT;
    command(LCD_ENTRYMODESET | _displaymode);
}

// Allows us to fill the first 8 CGRAM locations
// with custom characters
void LiquidCrystal_I2C::createChar(uint8_t location, uint8_t charmap[]) {
    location &= 0x7; // we only have 8 locations 0-7
    command(LCD_SETCGRAMADDR | (location << 3));
    for (int i = 0; i < 8; i++) {
        write(charmap[i]);
    }
}

//createChar with PROGMEM input
void LiquidCrystal_I2C::createChar(uint8_t location, const char *charmap) {
    location &= 0x7; // we only have 8 locations 0-7
    command(LCD_SETCGRAMADDR | (location << 3));
    for (int i = 0; i < 8; i++) {
        write(pgm_read_byte_near(charmap++));
    }
}

// Turn the (optional) backlight off/on
void LiquidCrystal_I2C::noBacklight(void) {
    _backlightval = LCD_NOBACKLIGHT;
    expanderWrite(0);
}

void LiquidCrystal_I2C::backlight(void) {
    _backlightval = LCD_BACKLIGHT;
    expanderWrite(0);
}

/*********** mid level commands, for sending data/cmds */

inline void LiquidCrystal_I2C::command(uint8_t value) {
    send(value, 0);
}

/************ low level data pushing commands **********/

// write either command or data
void LiquidCrystal_I2C::send(uint8_t value, uint8_t mode) {
    uint8_t highnib = value & 0xf0;
    uint8_t lownib = (value << 4) & 0xf0;
    write4bits((highnib) | mode);
    write4bits((lownib) | mode);
}

void LiquidCrystal_I2C::write4bits(uint8_t value) {
    expanderWrite(value);
    pulseEnable(value);
}

void LiquidCrystal_I2C::expanderWrite(uint8_t _data) {
#if defined(USE_SOFT_I2C_MASTER)
    i2c_write_byte(_Addr << 1, _data | _backlightval);
#else
    Wire.beginTransmission(_Addr);
    Wire.write((int )(_data) | _backlightval);
    Wire.endTransmission();
#endif
}

void LiquidCrystal_I2C::pulseEnable(uint8_t _data) {
    expanderWrite(_data | En);	// En high
#if !defined(USE_FAST_TIMING)
    delayMicroseconds(1);		// enable pulse must be > 450ns // AJ 20.9.23 not required for my LCD's
#endif
    expanderWrite(_data & ~En);	// En low
#if !defined(USE_FAST_TIMING)
    delayMicroseconds(50);      // commands need > 37us to settle // AJ 20.9.23 not required for my LCD's
#endif
}

// Alias functions

void LiquidCrystal_I2C::cursor_on() {
    cursor();
}

void LiquidCrystal_I2C::cursor_off() {
    noCursor();
}

void LiquidCrystal_I2C::blink_on() {
    blink();
}

void LiquidCrystal_I2C::blink_off() {
    noBlink();
}

void LiquidCrystal_I2C::load_custom_character(uint8_t char_num, uint8_t *rows) {
    createChar(char_num, rows);
}

void LiquidCrystal_I2C::setBacklight(uint8_t new_val) {
    if (new_val) {
        backlight();		// turn backlight on
    } else {
        noBacklight();		// turn backlight off
    }
}

void LiquidCrystal_I2C::printstr(const char c[]) {
    //This function is not identical to the function used for "real" I2C displays
    //it's here so the user sketch doesn't have to be changed
    print(c);
}

// unsupported API functions
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wunused-parameter"
void LiquidCrystal_I2C::off() {
}
void LiquidCrystal_I2C::on() {
}
void LiquidCrystal_I2C::setDelay(int cmdDelay, int charDelay) {
}
uint8_t LiquidCrystal_I2C::status() {
    return 0;
}
uint8_t LiquidCrystal_I2C::keypad() {
    return 0;
}
uint8_t LiquidCrystal_I2C::init_bargraph(uint8_t graphtype) {
    return 0;
}
void LiquidCrystal_I2C::draw_horizontal_graph(uint8_t row, uint8_t column, uint8_t len, uint8_t pixel_col_end) {
}
void LiquidCrystal_I2C::draw_vertical_graph(uint8_t row, uint8_t column, uint8_t len, uint8_t pixel_row_end) {
}
void LiquidCrystal_I2C::setContrast(uint8_t new_val) {
}
#pragma GCC diagnostic pop

#endif // _LIQUID_CRYSTAL_I2C_HPP