A Hardware Hacking Tool with Web-Based CLI That Speaks Every Protocol
C arduinobluetoothcan-busdebuggingeepromesp32flipperzerogpiohardware-hackingi2cjtagopenocdprotocolspwmradiorfidspisubghzuartwifi
improve onewire sniffer
Geobd2e351709c6
diff --git a/src/Controllers/OneWireController.cpp b/src/Controllers/OneWireController.cppindex 6607e17c..4f65fda1 100644--- a/src/Controllers/OneWireController.cpp+++ b/src/Controllers/OneWireController.cpp@@ -319,36 +319,71 @@ void OneWireController::handleConfig() {Sniff*/void OneWireController::handleSniff() {- terminalView.println("OneWire Sniff: observing data line.");- terminalView.println("Press ENTER to stop.\n");+ terminalView.println("OneWire Sniff: Oberserving data line... Press ENTER to stop.\n");+ // Init the pin to read passivelyuint8_t pin = state.getOneWirePin();pinMode(pin, INPUT);- uint8_t bitCount = 0;- uint8_t currentByte = 0;- int lastState = 0;- unsigned long lastTransition = micros();+ // Read initial state of pin+ int prev = digitalRead(pin);+ unsigned long lastFall = micros();while (true) {- char c = terminalInput.readChar();- if (c == '\r' || c == '\n') break;-- int state = digitalRead(pin);- if (state != lastState) {- unsigned long now = micros();- unsigned long duration = now - lastTransition;- lastTransition = now;-- std::stringstream ss;- ss << "Transition to " << state << " after " << duration << " us";- terminalView.println(ss.str());+ // Enter press+ auto c = terminalInput.readChar();+ if (c == '\r' || c == '\n' ) break;++ // Read current state of pin+ int current = digitalRead(pin);+ unsigned long now = micros();++ // Detect a falling edge+ if (prev == HIGH && current == LOW) {+ lastFall = now;+ }- lastState = state;+ // Detect a rising edge (end of a LOW pulse)+ if (prev == LOW && current == HIGH) {+ // Calculate duration of the LOW pulse+ unsigned long duration = now - lastFall;++ // Too long, not mean anything+ if (duration >= 3000) {+ terminalView.println("[Non-Standard Pulse] " + std::to_string(duration) + " µs");+ }+ // Most likely a reset pulse+ else if (duration >= 480) {+ terminalView.println("[Reset] LOW for " + std::to_string(duration) + " µs");++ // Most likely a presence pulse+ } else if (duration >= 60 && duration <= 240) {+ terminalView.println("[Presence] LOW for " + std::to_string(duration) + " µs");++ // Most likely a bit transmission+ } else if (duration >= 10 && duration <= 70) {+ // Want to sample ~15 µs after the falling edge+ // which is the standard sampling time in the 1-Wire protocol+ long elapsed = now - lastFall;+ if (elapsed < 15) {+ delayMicroseconds(15 - elapsed);+ }++ // Read the bit+ int sample = digitalRead(pin);+ terminalView.println("[Bit] LOW " + std::to_string(duration) ++ " µs, Sample = " + std::to_string(sample));++ // Unrecognized or noisy signal+ } else {+ terminalView.println("[Noise] LOW for " + std::to_string(duration) + " µs");+ }}++ // Update+ prev = current;}- terminalView.println("");- terminalView.println("OneWire Sniff: Exited");+ terminalView.println("\n\nOneWire Sniff: Stopped by user.");}/*