LordOS — a free, fast and secure GNU/Linux distribution based on Debian, with its own desktop environment: display server and Wayland compositor in C, a React UI engine on QuickJS, and private native apps.
LordOS live ISO
An image to boot LordOS from a USB stick or a CD on any 64-bit PC, without installing anything. It is the LordOS distribution itself (a minimal Debian 13 with the LordOS desktop environment) and it boots straight into the desktop. It's for testing real hardware: the GPU (AMD or Nvidia), sound, Wi-Fi and displays. It is the first step of M8 (the installable image).
![]() |
![]() |
| VM with SeaBIOS: boots on its own into LordOS | VM with OVMF (UEFI); screenshot from the final 0.7.0 ISO test |
![]() |
![]() |
| Boot menu (screenshot from before the grub font fix: the borders showed up as "?") | Network via LordOS's own DHCP, DNS, ping without root, sound (PipeWire) and boot in 11.8 s (screenshot: services and network in the final 0.7.0 ISO test) |
Writing it to a USB stick
The ISO is hybrid: it is written as is, without special tools. Careful: the whole USB stick is erased.
- Linux and other Unix-like systems:
sha256sum -c lordos-live-0.8.5-amd64.iso.sha256 # or: shasum -a 256 -c … sudo dd if=lordos-live-0.8.5-amd64.iso of=/dev/sdX bs=4M status=progress conv=fsync/dev/sdXis the whole USB stick (not a partition). On BSD-derived systems it is usually/dev/rdiskN: find it with the system disk tool and unmount it first. - Other systems: Rufus in DD mode (when it asks "ISO or DD", choose DD) or balenaEtcher.
- Ventoy also works: copy the
.isoonto the stick.
Then boot the PC from the USB stick: usually F12, F11, F8 or Esc at power-on, depending on the motherboard. It works with UEFI and with BIOS/Legacy. Secure Boot has to be off (see "Pending").
Boot menu
| Entry | What for |
|---|---|
| LordOS (live) | normal, in English (the default language) |
| LordOS (safe mode: no GPU) | passes lordos.gpu=0 → LORD_GPU=0: lord-server doesn't use the GPU path and composites on the CPU |
| LordOS (Español) / LordOS (Português) | lordos.lang=es / lordos.lang=pt: the interface in Spanish or Portuguese the first time |
| LordOS (copy to RAM) | toram: copies the system to memory (~1 GB free is needed) and the USB stick can be removed |
The GRUB menu itself is in English (GRUB's default). Every entry except safe mode boots with the
boot splash (splash); safe mode boots in text (nosplash).
Firmware and displays
The ISO boots with UEFI and with legacy BIOS (a hybrid image from grub-mkrescue: El
Torito for BIOS and efi.img for UEFI). Secure Boot has to be off. For virtual machines the
smoothest setup is UEFI firmware, 4 GB of memory, 2–4 processors and the "Debian 64-bit" guest
type; legacy BIOS works too since 0.8.1.
The 0.8.0 legacy BIOS bug. On VMware Fusion with BIOS firmware (2 GB, 2 vCPUs, SVGA) the machine triple-faulted when the menu's 5 s timeout fired; with UEFI it booted. On Proxmox with SeaBIOS and the "VMware compatible" display, GRUB hung right after drawing the menu (the CPU halted in real mode, keys did nothing); with standard VGA it booted. Cause, found by bisecting the GRUB configuration on VM 123 with small test ISOs (kernel and initrd only):
- with BIOS, GRUB draws through VBE, and
gfxmode=autofalls back to 640×480 when the display reports no EDID (both VMware's SVGA and QEMU'svmware-svga; VMware's log shows the 640×480 mode being set right before the fault); - at 640×480 GRUB's graphical terminal (
gfxterm) corrupts GRUB's own memory when its font is Inter 16, the proportional font the theme used forterminal-font. Without the theme's fonts, with Inter 14 alone, at 800×600 or 1024×768, or with GRUB's Unifont as the terminal font, the same 640×480 boot works.
Fix (0.8.1). The theme's terminal-font is GRUB's fixed-width "GNU Unifont Regular 16"
(the command line, the entry editor and boot messages; the menu items keep Inter), and on BIOS
grub.cfg asks for 1024x768x32,800x600x32,auto so the theme's layout fits (the crown no longer
starts above the top edge). UEFI keeps gfxmode=auto (GOP, native mode). The theme
(tools/iso/grub/lordos/theme.txt) is also the installed system's, so installed systems get the
fix through the lordos package; their /etc/default/grub keeps GRUB_GFXMODE=auto, which is
now safe at 640×480.
No KMS display. LordOS draws through kernel modesetting. QEMU's VMware-compatible display is
refused by vmwgfx ("unsupported hypervisor", "no pitchlock"), and Debian's kernel has no
simpledrm, so there is no /dev/dri/card0 with any firmware: the boot ended on a black screen.
Since 0.8.1 vmwgfx loads only on VMware itself (/etc/modprobe.d/lordos-vmwgfx.conf, DMI vendor
check), so the firmware framebuffer stays, and lord-sessiond writes on the text console that no
display device with KMS was found and which display to choose instead. On VMware itself vmwgfx
works (the user's VMware machine reaches the desktop with UEFI and, since 0.8.1, BIOS).
VMware guests get open-vm-tools (shutdown and restart from the hypervisor, time sync, the
guest's IP); its units have ConditionVirtualization=vmware and stay inactive elsewhere
(checked on Proxmox: "unmet condition"). Shared clipboard and automatic resize need the desktop
part (open-vm-tools-desktop, X11) and are not supported yet. GPU or CPU composition on VMware:
see GPU.md.
Typing lag in Chromium on VMware (0.8.0 and the first 0.8.1 ISOs): it was a GPU-path
presentation bug, not open-vm-tools, and it is fixed in 0.8.1. See
TROUBLESHOOTING.md, "Typing feels slow"; tools/diag/keylag.sh checks a
machine in two minutes.
Tested with the rebuilt ISO on VM 123 (Proxmox, q35, 4 vCPUs, emulated HD Audio):
| Firmware | Display | RAM | Result |
|---|---|---|---|
| SeaBIOS | VMware compatible | 2 GB | menu at 1024×768 (screenshot), the timeout boots the kernel (0.8.0: GRUB hung at the menu); no KMS device, so the text console explains it (screenshot) |
| SeaBIOS | standard VGA | 2 GB | menu, splash, desktop (screenshot); 1.6 GB available after login; open-vm-tools inactive (unmet condition); sink ERR 0 with audio playing from ~1 to ~5 minutes after login and 2 CPU burners |
| SeaBIOS | standard VGA | 4 GB | desktop |
| SeaBIOS | standard VGA | 2 GB | "safe mode: no GPU" entry: desktop |
| OVMF (UEFI) | VirtIO GPU | 2 GB | menu at the native 1280×800 with the theme, splash with its bar, desktop: as in 0.8.0 |
| VMware Fusion, BIOS | SVGA | 2 GB | 0.8.0: triple fault; 0.8.1: not re-tested on VMware here (the same GRUB code path as the QEMU case) |
| VMware Fusion, UEFI | SVGA | 4 GB | 0.8.0 already boots to the desktop and the installer (the user's machine) |
Not tested: installing to disk on a BIOS machine with this ISO (no free test disk; the installer writes both BIOS and UEFI GRUB, as tested on VM 117 in 0.7.0).
Boot splash and boot menu
From power-on to the login screen LordOS shows its own look: the boot menu, then the crown with a progress bar, then the login screen (or the desktop, with autologin) without a black frame or console text in between.
| Boot menu (GRUB theme) | Boot splash (Plymouth) |
|---|---|
![]() |
![]() |
- Boot menu: the GRUB theme
tools/iso/grub/lordos/(theme.txt, images and Inter as GRUB fonts): the navy background, a small crown, the entries in the brand colours with the selected one on a rounded violet band,. The ISO copies it to/boot/grub/themes/lordos/; the package installs it in/usr/share/grub/themes/lordos/(amd64 only) and the disk installer setsGRUB_THEMEto it. The entries (English, Español, Português, safe mode, copy to RAM) are the same as before. - Boot splash: the Plymouth theme
lordos(tools/boot/plymouth/lordos/, thescriptmodule), installed by the package in/usr/share/plymouth/themes/lordos/. The ISO installsplymouthandplymouth-labeland selects it (plymouth-set-default-theme lordos) before building the initramfs, so it shows from the initramfs on. The bar follows Plymouth's boot progress, eased so it never jumps or goes back; there are no text messages, and Esc shows the text console as usual. If a disk is encrypted (LUKS), a styled password field with a lock replaces the bar. Since 0.8.5 the bottom right corner shows the time since the splash started, in seconds and milliseconds (it never goes backwards); the time from the kernel's start to LordOS's first frame is logged by lord-sessiond on every boot (journalctl -b -u lordos | grep "first frame", kept in/var/lib/lordos/boot-times.jsonl, the last 200 boots) and shown in About LordOS → Startup time (RESULTS.md, "Boot time"). - Installed system: the installer writes
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash vt.global_cursor_default=0 loglevel=3",GRUB_GFXPAYLOAD_LINUX=keep,GRUB_TERMINAL_OUTPUT=gfxtermandGRUB_THEME(each only when Plymouth and the themes are in the copied system), then rebuilds the initramfs and the GRUB menu.nosplashon the kernel command line (ein the menu) boots in text for one boot. - Hand-off: see
SESSIONS.md, "Boot splash": Plymouth gives up the card just before lord-sessiond takes it, its last frame stays until LordOS's first frame replaces it, and only then is Plymouth ended with--retain-splash. - On Debian (install.sh): optional and asked for; see
INSTALL-DEBIAN.md.
Tested on VM 117 (OVMF, vga: virtio, 2026-10-18), recording the screen at 4 frames per second
over QMP (tools/demo/record.py): the boot menu, ~2.5 s of black while the kernel loads virtio-gpu
and Plymouth starts, the splash from ~19 s, and at ~43 s the desktop (autologin) replaces the
splash directly: no black or console frame between the last splash frame and the first LordOS one.
The journal (of the first test boot, the same hand-off code) shows the chain: lordos.service started (21.2 s), lord-sessiond "first frame on the
monitor" (27.9 s), lordos-splash-quit.service finished, then plymouth-quit.service.
| Last splash frame | Next frame: LordOS | The journal |
|---|---|---|
![]() |
![]() |
![]() |
Not done yet: while GRUB loads the kernel it clears its terminal area to black for about a second
(visible in the recording; a known issue of 0.8.5-beta: on legacy BIOS, which reads the disc slowly,
the black rectangle inside the theme's background lasts a few seconds, seen on QEMU with SeaBIOS; 0.8.4's
ISO does the same, and neither a background image in each entry nor a hidden countdown in the theme
changed it); and an encrypted-disk (LUKS) boot was not tested on a VM, only the
static preview of the password field (docs/boot/splash-preview-password.png).
The images come from python3 tools/boot/gen-boot-assets.py (rsvg-convert; --preview also
writes the static previews in docs/boot/). The GRUB fonts are made on a Debian with grub-common:
R=0x20-0x7E,0xA0-0x17F,0x2010-0x2027
grub-mkfont -s 16 -r $R -o tools/iso/grub/lordos/inter-regular-16.pf2 assets/fonts/Inter-Regular.ttf
grub-mkfont -s 14 -r $R -o tools/iso/grub/lordos/inter-regular-14.pf2 assets/fonts/Inter-Regular.ttf
grub-mkfont -s 16 -r $R -o tools/iso/grub/lordos/inter-semibold-16.pf2 assets/fonts/Inter-SemiBold.ttf
Inter is under the SIL Open Font License 1.1 (assets/fonts/Inter-LICENSE.txt).
In the live session:
- User:
lordos, no password, with passwordlesssudo. - root: password
lordos, only for the emergency console. - Changes: everything you change stays in RAM and is lost on power-off. The Store and package installation work the same, but in memory.
Installing to disk
On the live ISO the Install LordOS assistant (apps/installer) opens on its own. It only exists
on the live system: the manifest has "live": true and the SDK hides it if
/run/live/medium/live/filesystem.squashfs is not there.
![]() |
![]() |
| Welcome | Disk: model, size, contents and a strong confirmation |
![]() |
![]() |
| User, password and computer name, with validation | Installing: progress bar by phase |
![]() |
![]() |
| Booted from the disk (UEFI), with the created user | Groups, fstab with UUIDs, es_AR, time zone, no live-boot, network; sudo asks for a password |
![]() |
![]() |
| The same disk booting through SeaBIOS (BIOS + GPT) | The ISO ships the GPU path (GPU=1); in the VM (virtio without 3D) it falls back to the CPU on its own |
Assistant steps:
Welcome.
Language, region and time zone. The language changes the interface live.
Keyboard. The layout is applied live and there's a field to try it.
Disk. Lists the disks (model, size, connection and what's on them), excluding the disk the live system booted from. To continue you have to tick "I understand the whole disk will be erased" and type the disk's name (
sda). Optional: swap as a file, of 2, 4 or 8 GB.User.
- The user name is suggested from the full name.
- The password is typed twice.
- The computer name is suggested as
<user>-pc. - The same rules are validated again later, on the root side.
Summary and "Install".
Progress, in four phases:
- partitioning;
- copying the system, with the percentage reported by
unsquashfs; - configuring;
- installing the bootloader.
At the end "Restart" appears.
How the disk ends up:
| Partition | Size | What for |
|---|---|---|
1 biosboot (EF02) |
1 MiB | grub for BIOS on a GPT disk |
2 EFI (EF00) |
512 MiB, FAT32 | grub for UEFI, at the removable path (EFI/BOOT/BOOTX64.EFI: boots on any firmware without an NVRAM entry) |
3 LordOS (8304) |
the rest, ext4 | the system; swap is /swapfile |
The installed system is a copy of the live system with these changes:
- Live-only things removed:
live-bootand thelordosuser are removed, along with its passwordless sudo;- root is locked (
*).
- The new user is in the
sudo,audio,video,inputandrendergroups, and has linger, so their PipeWire starts with the system. - Configuration that gets written:
fstabwith UUIDs;- hostname and
/etc/hosts; /etc/default/locale,/etc/localtimeand/etc/default/keyboard;- the user's LordOS settings (language and keyboard);
- a new
machine-id; - the regenerated initramfs and
grub.cfg.
- Login:
lordos.servicestartslord-sessiond, which shows LordOS's own login screen (SESSIONS.md): the installer writes an emptyAUTOLOGIN=to/etc/lordos/session.conf;- automatic login is turned on in Settings → Users;
- the password is used for
sudoand for administration actions.
Installer security
It adds three actions to the privileged helper (server/src/install/install.c, macro
INSTALL_ADMIN_ACTIONS in admin.c):
| Action | Who | What it does |
|---|---|---|
install-disks |
administrator | lists the installable disks (JSON via LOG) |
install-run <json> |
administrator, in a separate process | installs |
install-reboot |
administrator | systemctl reboot |
All three answer ERR outside live mode: /run/live/medium/live/filesystem.squashfs has to
exist. On an installed system that file doesn't exist.
What install-run validates on the root side, without trusting the interface:
- The disk:
- it has to be in the same list as
install-disks(from/sys/block, without loop, ram, zram, sr, dm, md or nbd, without read-only ones and without the disk that contains/run/live/medium); - it has to be at least 8 GB;
- it can't have anything mounted or active swap.
- it has to be in the same list as
- User:
^[a-z_][a-z0-9_-]{0,31}$;- it can't be a reserved name or a user that already exists on the system.
- Full name: UTF-8, without
:,,or control characters. - Computer name:
^[a-z0-9]([a-z0-9-]{0,61}[a-z0-9])?$. - Region: it has to appear in
/usr/share/i18n/SUPPORTEDwith UTF-8. - Time zone: a regular file in
/usr/share/zoneinfo, without... - Keyboard: the layout has to exist in
/usr/share/X11/xkb/symbols; the variant,[A-Za-z0-9_-]. - Swap: from 0 to 16384 MiB.
- The password:
- never goes into an argv: it arrives through the helper's socketpair;
- it is hashed with
crypt(3)yescrypt ($y$, like Debian, withcrypt_gensalt_ra); - the hash is written directly to the new system's
/etc/shadow; - afterwards it is wiped from memory (
explicit_bzero), and the interface also forgets it when starting.
- Fixed-path programs:
wipefs,sgdisk,udevadm,mkfs.vfat,mkfs.ext4,unsquashfs,blkid,fallocate,mkswap,chroot(withdpkg,userdel,useradd,locale-gen,systemd-machine-id-setup,update-initramfs,grub-installandgrub-mkconfiginside) andsystemctl.install.cbuilds the arguments from the already validated values.
What it ships
- LordOS as its own package,
lordos_<version>_amd64.deb, built bytools/iso/mkdeb.sh. The version and the release channel come frompackage.json("version"and"lordos": {"channel": "beta"}; an empty channel is a stable release).make -C serverbakes both, plus the build date and git commit, intolord-server, and About and Settings → General show them. The package contains:/usr/lib/lordos/bin/lord-sessiond(root: sessions, login screen, remote desktop off, port- and
/usr/lib/lordos/bin/lord-server(each session);
- and
- the prebuilt themes, in
/usr/lib/lordos/themes; assets/: fonts, texts, icons and the shell integration;lordos.service.
- Boot:
lordos.servicestartslord-sessiondon tty1 as root./etc/lordos/session.confsaysAUTOLOGIN=lordos: it logs in on its own, as before. The user has no password; after locking the screen you get back in with the field empty (only on the physical display).- Before that,
lordos-live-prep(ExecStartPre, only if/run/liveexists) applieslordos.lang(to/etc/default/localeand the user's settings), creates their folders and leaves/etc/network/interfaceswith onlylo. lordos.gpu=0(safe mode) still works: lord-sessiond reads it from/proc/cmdlineand passesLORD_GPU=0to every session. Without that option, the session on the display composites on the GPU as before (Mesa: EGL, GBM, GLES2, linux-dmabuf and direct scanout).- The user has linger, so their PipeWire starts with the system.
- The system user
lordos-greeter, the login screen's user, is created when building the ISO (lord-sessiond also creates it if it's missing).
- Network: LordOS's own DHCP, in
lord-netdfrom boot (NETWORK.md). No ifupdown, systemd-networkd or NetworkManager. - Sound: PipeWire, pipewire-pulse, WirePlumber, alsa-ucm-conf and the SOF firmware (audio on Intel laptops).
- GPU: Mesa (radeonsi, iris, nouveau, llvmpipe and RADV/ANV/NVK for Vulkan),
libgbm1,libegl1,libgles2,firmware-amd-graphicsandfirmware-misc-nonfree. To test it:glmark2-es2-wayland,eglinfo/glxinfo(mesa-utils) andvulkaninfo. - Wi-Fi: wpa_supplicant and Intel (iwlwifi), Realtek and Atheros firmware.
- Fonts: Noto (core, CJK, emoji) and DejaVu; the rest of what M5b needs: libthai-data, skkdic and rime-data-pinyin-simp.
- Linux apps: Chromium and Firefox ESR (preinstalled browsers that draw their own bar with
LordOS's window buttons,
WAYLAND.md), plus foot and FeatherPad as samples. - X11 apps (0.8.3):
xwayland, started by lord-server only when an X11 app connects (WAYLAND.md, "X11 apps (Xwayland)").
Building it
On a Debian 13, from the root of an already compiled repository. Since M8 it is built on VM 116
(lordos-gpu, 172.17.0.52, a clone of 115), in ~/LordOS-iso: 115 is the user's development VM and
is not used for this.
# on the development machine: the themes (also the login screen, themes/greeter)
npm run build
COPYFILE_DISABLE=1 tar czf - --no-xattrs --exclude build --exclude node_modules \
package.json README.md server third_party assets themes tools | \
ssh [email protected] 'rm -rf ~/LordOS-iso && mkdir ~/LordOS-iso && cd ~/LordOS-iso && tar xzf -'
# on VM 116
make -C server -j4 # lord-server (GPU=1) and lord-sessiond (needs libssl-dev, libsrtp2-dev, libusrsctp-dev)
sudo tools/iso/build.sh /var/tmp/lordos-iso # → /var/tmp/lordos-iso/out/
The ISO is copied to Proxmox (local:iso/lordos-live-<version>-amd64.iso). Before overwriting it, the
previous one is kept with its date: lordos-live-0.7.0-amd64-20261016-1529.iso is the last one with
lordos-session (sha256 d4a8b25f…4b4dc5).
build.sh steps:
mkdeb.sh: the LordOS package.debootstrap --variant=minbaseof trixie, with main, contrib, non-free and non-free-firmware.apt-get install --no-install-recommendsof the list above and the LordOS package.- Configuration:
- locales
es_ES,es_AR,es_MX,en_USandpt_BR; - the
lordosuser, with linger; lordos.serviceenabled andgetty@tty1masked;/etc/resolv.confas a regular file, for LordOS's DHCP;/etc/network/interfaceswith onlylo;net.ipv4.ping_group_range, sopingworks without root.
- locales
- Cleanup: apt lists, caches and
machine-id. mksquashfs(xz, BCJ x86).grub-mkrescue: a single ISO with El Torito for BIOS and an EFI image (efi.img) for UEFI, with the hybrid MBR for USB.
lord-server is compiled with make -C server GPU=1 (it needs libgbm-dev libegl-dev libgles-dev) so
the ISO ships GPU compositing (Mesa; see GPU.md).
Measured on VM 116 (4 Xeon Silver 4108 cores, 4 GB) for 0.7.0: ~8 minutes (14.5 minutes for 0.8.0, see "Release test (0.8.0 Beta)"), almost all of it downloading and installing packages and compressing.
| ISO | 651 MB (650 809 344 bytes; with lord-sessiond, the login screen, the installer and the GPU path) |
| squashfs | 545 MB |
| uncompressed system | 1.5 GB |
lordos_0.7.0_amd64.deb |
2.9 MB |
Build packages
sudo apt-get install -y --no-install-recommends debootstrap squashfs-tools xorriso grub-pc-bin \
grub-efi-amd64-bin grub-common mtools dosfstools lintian libgbm-dev libegl-dev libgles-dev libssl-dev \
libpoppler-glib-dev libarchive-dev libavcodec-dev libavformat-dev libavutil-dev libswscale-dev \
libswresample-dev libva-dev libsrtp2-dev libusrsctp-dev clang
| Package | What for |
|---|---|
libssl-dev |
compiling lord-sessiond (remote desktop TLS), lord-maild (Mail) and, since 0.8.5, lord-fetch (the blocklists) and lord-tls (the package engine's HTTPS); without it, make builds only lord-server and mkdeb.sh refuses |
libpoppler-glib-dev, libarchive-dev |
compiling lord-doc (PDF and archives); without them make skips it and the package ships without a PDF viewer |
libavcodec-dev, libavformat-dev, libavutil-dev, libswscale-dev, libswresample-dev |
compiling lord-media (video, photos, camera, recorder); without them make skips it |
libva-dev |
optional: GPU decoding (VA-API) in lord-media |
libsrtp2-dev, libusrsctp-dev |
the remote desktop (WebRTC: SRTP and the data channels) in lord-sessiond; required: without them make stops with an error for lord-sessiond (or build with SESSIOND=0), and the package always depends on libsrtp2-1 and libusrsctp2 |
clang |
compiling lord-netperm's BPF programs (per-app network permissions); without it the build still works, but no rules are applied |
debootstrap |
the Debian base system |
squashfs-tools |
mksquashfs |
xorriso, grub-pc-bin, grub-efi-amd64-bin, grub-common, mtools, dosfstools |
grub-mkrescue: the hybrid BIOS + UEFI ISO |
lintian |
checking the .deb |
lintian
lintian lordos_0.7.0_amd64.deb reported no errors and two warnings, on purpose (the later release
tests list theirs: 0 errors and 17 known warnings for 0.8.4.1). The two:
duplicate-font-file: JetBrains Mono ships inassets/fontsbecause the Terminal needs it even whenfonts-jetbrains-monoisn't installed.uses-dpkg-database-directly: our own package engine reads/var/lib/dpkg/status(seePACKAGES.md); it doesn't write the dpkg database.
Test with lord-sessiond (M8, October 16)
The ISO starts lord-sessiond instead of lordos-session. ISO tested:
lordos-live-0.7.0-amd64.iso, 650 817 536 bytes, sha256
7cf1c1b1d97ee040e74dcf8d93a6996f1ae369b457f51aba23cdd2bdd64e898c.
![]() |
![]() |
| UEFI (OVMF): grub menu | Logs straight into the desktop, without going through the login screen |
![]() |
![]() |
lordos, AUTOLOGIN=lordos, /sys/firmware/efi, network via DHCP, port 5673 closed |
❖L: locked screen, with the IP at the bottom |
![]() |
![]() |
| Enter with the field empty: back to the same session | Settings → Sharing: remote desktop off (there's no /etc/lordos/remote/config) |
![]() |
![]() |
| "Safe mode" entry | lordos.gpu=0 → the session receives LORD_GPU=0 and composites on the CPU |
![]() |
![]() |
lordos.lang=en: the interface in English |
Installer, in a temporary VM with an empty 24 GB disk (OVMF) |
![]() |
![]() |
User jordan / «Jordan Lee», computer jordan-pc |
Summary, with the new login text |
![]() |
![]() |
| Installing (~1 minute) | Done; "Restart" with one click |
![]() |
![]() |
| The installed system boots to the login screen | Logging in with the new user's password (final 0.7.0 ISO test) |
![]() |
|
Empty AUTOLOGIN=; no live-boot or lordos user; groups sudo, audio, video, render and input; network; UEFI |
Fixes found in this test:
- The network didn't come up. With lord-sessiond, every session is
--headless, including the one on the display.main.conly sentnet-restorewithout--headless, soens18stayed DOWN.- Now every user session sends
net-restore. net_act_restore(server/src/net/actions.c) records in/run/lordos/net-ownerthe pid of the helper that brought the network up. While that helper is alive, the other sessions don't start another DHCP on the same interface.
- Now every user session sends
- The installer summary said the system logged in on its own and that the login screen would
come "in an upcoming version".
installer.summary.loginwas changed in es, en and pt.
The installer screenshots up to "Done" and those of the installed system are from the ISO before that
text was fixed (sha256 daba6313…c8ec65). That ISO has the same binaries; only those texts change.
With the final ISO, UEFI boot, the network, ❖L/Enter and the installer summary were repeated. Nothing
was installed in that repeat.
Release test (0.8.5 Beta, October 27)
lordos-live-0.8.5-amd64.iso and the Raspberry Pi image lordos-0.8.5-rpi5-arm64.img.xz are the
0.8.5-beta release files. What the CHANGELOG records as tested before the release:
| Test | Result |
|---|---|
Update with apt, the same package built as 0.8.5~rc2: a VMware machine on 0.8.4.1 and a Raspberry Pi 5 on 0.8.4, then a restart |
no migration (/var/lib/lordos/migrations unchanged from 0.8.4), settings kept |
Update 0.8.4.1 → 0.8.5 through LordOS's package engine against lordos.org/apt-staging, VMware Fusion guest (results/0.8.5-beta/vmware-fusion/) |
first frame on the monitor 7.4 s after the kernel started; GPU composition on SVGA3D; Test Bench 59.8 frames a second at 60 Hz |
Known issues of the release that concern the image: the legacy BIOS black rectangle between the boot menu and the splash ("Boot splash and boot menu" above). The others (the remote desktop's black corners on a dragged window, llama.cpp on a GPU not tested on real hardware, the "displays" search, a small display's name cut in Settings → Displays) are in the CHANGELOG.
Release test (0.8.4.1 Beta, October 25)
An update of 0.8.4 (no new ISO: the 0.8.4 ISO stays the current one). lordos_0.8.4.1_amd64.deb built
on VM 116 (build 20261025.9796cda3) and lordos_0.8.4.1_arm64.deb with the Raspberry Pi 5 image on
the Pi itself, natively, in build-img.sh's arm64 chroot (build 20261025.5adba3b7; the two builds
differ only in tools/rpi/build-img.sh), both RELEASE=1 from a tree whose code-manifest.json was
signed on the maintainer's machine; lord-server --check-code: verified, release build.
make -C server test: 23 passed, 0 failed, 8 skipped on VM 116 and 21 passed, 0 failed, 11 skipped in
the Pi's arm64 chroot (settings-hw-test 160/160 on both, with the new rpi-eeprom-update parser
cases); the seven node suites pass on the maintainer's machine; 0 compiler warnings. Both .deb:
lintian 0 errors (17 warnings, the known ones); both SBOMs validated with pyspdxtools.
The image: lordos-0.8.4.1-rpi5-arm64.img.xz, 784 982 908 bytes, sha256
da398fc6ee1cad611a07e34399a018250ab403a525157aa50a52172293d0e0da, signed into its own
SHA256SUMS/SHA256SUMS.sig with the release key. Against 0.8.4's image: 533 → 749 MiB compressed,
2 747 → 3 674 MiB raw (Chromium, Firefox ESR and the ISO's system packages); the system is 2.3 GB.
| Check | Result |
|---|---|
Image, read-only (loop device on the Pi): config.txt has display_auto_detect/camera_auto_detect (lines 15–16) before dtoverlay=vc4-kms-v3d (line 21); lordos 0.8.4.1 verified, release build; Chromium 156 and Firefox ESR 153 (Debian's) with custom_chrome_frame true, the GTK theme and inTitlebar 1; systemd-timesyncd, cups, avahi-daemon, exfatprogs, ntfs-3g, power-profiles-daemon, gsettings-desktop-schemas, rpi-eeprom 28.34-1 installed; lord-doc, lord-media and lord-netperm with its BPF programs in the package; dpkg --audit clean |
pass |
Store → Updates on VM 120 (0.8.4 installed from its ISO, UEFI, user rtester, lordos.sources on apt-staging): "LordOS 0.8.4.1 is available" with the notes; the plan is lordos only (11 MB); Update → no migration → "Restart required" → Restart (the sheet with the open apps) → login screen → About "Version 0.8.4.1 · Beta", build 20261025.9796cda3, Verified; lordos, lord-netperm, lord-fand active, 0 failed units; Settings has no Board firmware on a PC (search "firmware": no results) |
pass |
apt update && apt-get upgrade (VM 120 back at the fresh 0.8.4): 27 s, lordos and a Debian update, nothing kept back, no migration, settings.json byte-identical, /run/reboot-required.pkgs = lordos; apt install --reinstall lordos runs no migration; after the restart 0 failed units |
pass |
Staging repository: the 11 Raspberry Pi packages verified against Raspberry Pi's signed index and the pinned SHA-256s; only the arm64 index lists them; apt-repo.sh verify staging passes. On the Pi, apt-get install -s rpi-eeprom with only Debian and LordOS sources (Raspberry Pi's archive left out, empty dpkg status) resolves everything from LordOS:stable and Debian |
pass |
Raspberry Pi 5 (test SD, 0.8.4 image with the config.txt fix by hand): apt-get install lordos from staging: 0.8.4.1 in 18 s, no migration, sshd -t clean, lord-server --check-code verified |
pass |
Settings → Board firmware on the Pi (a test account over the LordOS remote desktop): "Update available", installed Tuesday, May 26, 2026, latest Friday, September 25, 2026, release Default; Update → "Update ready: restart to finish" with the note and Restart… (the session's Restart sheet); the board staged pieeprom.upd, pieeprom.sig and recovery.bin and wrote /run/rpi-eeprom-update-pending (no flashrom, no rpieepromab) |
pass |
After the restart: vcgencmd bootloader_version 2026/09/25 (1accd665…, was 2026/05/26 086b83e3…), the staged files gone; the page says "Up to date", installed = latest = September 25, 2026 |
pass |
Browsers on the Pi (installed on the test SD the same way as the image, defaults from browser-defaults.sh): Chromium 156 on Wayland with one bar and LordOS's traffic lights; Firefox ESR 153 with its own single bar; Settings → Displays → Video: "Automatic", this board can't decode VP9 or AV1 in hardware, so sites are asked for H.264 |
pass |
Found in this test:
- The first arm64 package was incomplete. Built in
build-img.sh's arm64 chroot (0.8.4's was built natively on the development SD), it had nolord-doc, nolord-mediaand no BPF programs inlord-netperm: the chroot lacked Poppler, libarchive, FFmpeg and clang, andmakeleaves those parts out silently. It was published to staging only, then replaced there (the CDN path invalidated).build-img.shnow installs the ISO's build packages in the chroot, copiespackaging/, and refuses a package withoutlord-doc,lord-mediaor the BPF programs. - The Pi image had no network time client (
systemd-timesyncd): the board starts months behind and refuses every signed index ("not valid yet"); the test SD needed its clock set by hand. Added. - Restart from a session that is not on the monitor (here the remote desktop) shows the Restart
sheet, but
lord-sessiondonly accepts power requests from the session shown on the monitor, so nothing happens after the countdown; the board was restarted withsystemctl reboot. The same holds for Store → Updates' Restart Now; to fix in a later version (canPower()should be false there). - The Store's package engine ignored
/etc/apt/preferences.d, so on the Pi image its "Update all" would take Raspberry Pi's+rptbuilds (Chromium, BlueZ…) over Debian's;aptfollows the priorities (release notes, Known issues). Fixed for 0.8.5 (PACKAGES.md, "How it resolves").
Release test (0.8.4 Beta, October 19–25)
lordos-live-0.8.4-amd64.iso, built from ca52be1 (build 20261025.ca52be13; the v0.8.4-beta tag,
b022dc3, only adds the website's Imager guide on top), 1 052 588 032 bytes, sha256
73bf0124149ecd4e46efc751c1d082d2eb3e7d4c2406a19451f4dedfc144dc72, built on VM 116 with GPU=1 RELEASE=1 from a tree whose code-manifest.json was signed on the maintainer's machine
(REQUIRE_SIGNED_CODE=1); lord-server --check-code: verified, release build. make -C server test:
23 passed, 0 failed, 8 skipped on VM 116 (the seven node suites ran on the maintainer's machine, all
pass) and 24 passed, 0 failed, 7 skipped on the Raspberry Pi 5; 0 compiler warnings. Both .deb:
lintian 0 errors (17 warnings, the known ones); both SBOMs validated with pyspdxtools. New
dependencies: libsrtp2-1 and libusrsctp2 (the WebRTC remote desktop). The release also carries the
LordOS Imager's desktop downloads (lordos_imager_0.8.4_universal.dmg, signed and notarized;
_amd64.deb; _x64_setup.exe, not code-signed), listed in the signed SHA256SUMS. The test VMs got
a fresh 0.8.3 install from the published 0.8.3 ISO first (user rtester), so the upgrade ran on a
clean system. The tests started on October 19 with build 20261019.13bdd697 and were repeated on
October 25 with the final build (it adds the Pi HDMI wait, 4d17d2d, and strips lordos-firstrun).
| Check | Result |
|---|---|
Store → Updates on VM 120 (0.8.3 installed from its ISO, UEFI, lordos.sources pointed at apt-staging): "LordOS 0.8.4 is available" with the notes; the plan is lordos plus libsrtp2-1 and libusrsctp2; Update → migration 005 only → "Restart required" → Restart (the sheet with the open apps) → login screen → About "Version 0.8.4 · Beta", build 20261025.ca52be13, Verified; lordos, lord-netperm, lord-fand active, 0 failed units |
pass |
apt update && apt upgrade (0.8.3 → 0.8.4, VM 120 back at the clean 0.8.3): 41 s, migration 005, the two libraries installed, settings.json byte-identical, restart, 0 failed units; apt install --reinstall lordos runs no migration again. apt-get upgrade keeps lordos back (new dependencies; noted in the release notes) |
pass |
Migration 005 on the upgraded system: /etc/chromium/master_preferences custom_chrome_frame false → true, /etc/firefox-esr/lordos.js inTitlebar 0 → 1. Settings → Appearance → "Browsers: tabs in the title bar" lists "1 Chromium profile still uses the LordOS frame" (a profile opened on 0.8.3); Change them → Chromium opens with a single bar and LordOS's traffic lights |
pass |
Smoke checks: XTerm opens (Xwayland :0, app-lordos-debian-xterm.scope); the native LordOS Imager opens (Device step); the overlay scroll bar shows while scrolling and is gone once the pointer leaves; smartmontools installed and smartd forced past its virtualization check: it stays off |
pass |
Remote desktop on the upgraded VM 120 (Settings → Sharing on, "Local network"), from the maintainer's machine in headless Chrome: H.264 video over UDP, 1280×800, the data channel up, audio packets flowing; with UDP and every TCP connection to 5673 beyond the first dropped (iptables on the VM, for the test only) the page shows "Couldn't connect to the remote desktop" with why and what to do, and Try again |
pass |
VM 117, OVMF: the final ISO boots to the live desktop, About "Version 0.8.4 · Beta", build 20261025.ca52be13, Verified; the install itself was tested with the first build's ISO (20261019.13bdd697, the same installer): install on the disk (en_US, Buenos Aires, 2 GB swap) in under 2 minutes; installed: login screen, lordos 0.8.4, xwayland and libsrtp2-1 installed, Chromium's new-profile default custom_chrome_frame: true, lordos-firstrun present, 0 failed units, boot 6.8 s, 4.6 GB used |
pass |
Raspberry Pi 5 (lordos 0.8.3, kernel 6.18.57-lordos.3-rpi-2712): apt-get install lordos from staging: 0.8.4 in 13 s, migration 005, sshd -t clean, lord-server --check-code verified; lordos, lord-netperm, lord-fand restarted (no reboot), display: /dev/dri/card1; then the source switched back to the live repository: lordos 0.8.4 installed and candidate |
pass |
Pi firewall cut on kernel -3 with 0.8.4 (server/tests/netperm_cut.sh as root with a hand-made session cgroup, removed afterwards): TCP download cut 0.34 s after the rule, idle session 0.02 s, HTTP/3 0.07 s, a domain rule cuts only that destination, "no internet" keeps the LAN; 15/15 |
pass |
Raspberry Pi 5 image (build 20261019.13bdd697): decompressed and attached as a loop device on the Pi; a first-run file written by the Imager's own writer (apps/imager/core/firstrun.js: Spanish, Classic, user with autologin, hidden Wi-Fi, SSH keys only, remote desktop, active cooler with the performance profile and overclock) applied by the image's own arm64 lordos-firstrun with --root/--boot: 26/26 checks (every file, owners and modes, no Wi-Fi password, the file shredded, a broken file applies nothing) |
pass |
GitHub: the release downloaded back, the key fingerprint c7155b8e…53ea108e, "Signature Verified Successfully" and every SHA-256 OK; the downloaded .dmg, marked as downloaded, accepted by the system's app check ("Notarized Developer ID") and its staple validated |
pass |
Found in this test:
lordos-firstrunwas never built bymake -C server(the Makefile resetALLafter adding it), so the package couldn't be made; fixed (13bdd69). It wasn't stripped either (lintian error); fixed.- The Store refused a re-published staging package with "the file is larger than allowed": the CDN still served the first 0.8.4 test build at the same URL after the staging pool was replaced. The check did its job (nothing was installed); invalidating the path fixed it. Versions are never replaced in the live repository, so this only concerns staging.
- The Pi image is not published: a user report showed the 0.8.3 Pi image staying on the text
console on an HDMI monitor at its first boot. 4d17d2d makes the session wait for the display
driver; the rebuilt 0.8.4 image (
20261025.ca52be13) hasn't been booted on a board with a monitor yet, so it is held back (release notes, Known issues).
Release test (0.8.3 Beta, October 19)
lordos-live-0.8.3-amd64.iso, built from 36cf07b (build 20261019.36cf07b4; the v0.8.3-beta tag,
9eff265, only adds two CHANGELOG notes on top), 1 051 269 120 bytes, sha256
2416c730da65afe37ed6be615fd67448edf100452d443786a9113b90a05c7f5d, built on VM 116 with GPU=1 RELEASE=1 from a tree whose code-manifest.json was signed on the maintainer's machine
(REQUIRE_SIGNED_CODE=1); lord-server --check-code: verified, release build. make -C server test:
23 passed, 0 failed, 7 skipped on VM 116 (the six node suites ran on the maintainer's machine, all
pass) and 24 passed, 0 failed, 6 skipped on the Raspberry Pi 5; 0 compiler warnings. Both .deb:
lintian 0 errors (17 warnings, the known ones); both SBOMs validated with pyspdxtools. New in the
images: xwayland (also recommended by the package). The test VMs got a fresh 0.8.2 install from
the published 0.8.2 ISO first (user rtester), so the upgrade ran on a clean system.
| Check | Result |
|---|---|
Store → Updates on VM 120 (0.8.2 installed from its ISO, UEFI, lordos.sources pointed at apt-staging): "LordOS 0.8.3 is available" with the notes; the plan is lordos only; Update → migration 004 only (a running smartd, started for the test, was stopped) → "Restart required" → Restart (the sheet with the open apps) → login screen → About "Version 0.8.3 · Beta", build 20261019.36cf07b4, Verified; lordos, lord-netperm, lord-fand active, 0 failed units |
pass |
apt update && apt upgrade (0.8.2 → 0.8.3, VM 120 back at the clean 0.8.2): 31 s, migration 004, xwayland installed as a new recommendation, settings.json byte-identical, restart, 0 failed units, X display reserved; apt install --reinstall lordos runs no migration again. apt-get upgrade keeps lordos back (new recommended package; noted in the release notes) |
pass |
Smoke checks on the upgraded system: XTerm opens (Xwayland :0, app-lordos-debian-xterm.scope); the Passwords padlock and the Backups clock centered in the Dock; Settings → Appearance → Classic and back, live; overlay scroll bar visible while scrolling and gone 3 s later; smartmontools installed and smartd forced past its virtualization check: it stays off (ConditionPathExists=/etc/lordos/smartd-enabled) |
pass |
| Firewall: Chromium playing a video, its row switched off in Monitor → Network: its established sockets went from 10 to 0 within 0.5 s of the click, received bytes stopped; Monitor counts the denials; switching it back on works | pass |
Remote desktop on the upgraded VM 120 (Settings → Sharing on, "Local network"): login from the LAN (303 + __Host- cookie); 3 wrong passwords (1.25 s each) block the address, the 4th connection is cut before TLS; the block notification and the "Temporarily blocked" row in Settings; Unblock → login works again; Monitor → Network shows the "Remote desktop" row with the 3 denials |
pass |
VM 117, OVMF: live desktop, About 0.8.3 Verified; install on the disk (en_US, Buenos Aires, 2 GB swap) in under 5 minutes; installed: login screen, lordos 0.8.3 and xwayland installed, DISPLAY=:0, 0 failed units, boot 7.4 s, 4.6 GB used |
pass |
Raspberry Pi 5 (lordos 0.8.0, no repository yet): the 0.8.0 one-time step (key and lordos.sources), then apt-get install lordos from staging: 0.8.3 in 15 s, migrations 001–004, xwayland installed, sshd -t clean with root keys kept (migration 002), lord-server --check-code verified, lordos restarted to the login screen without a reboot; then the source switched to the live repository: lordos 0.8.3 is the candidate |
pass |
Raspberry Pi 5 image, read-only: the signed manifest (same SHA-256 as the maintainer's), build 20261019.36cf07b4 in lord-server, migrations 001–004, /usr/bin/Xwayland, the smartd drop-in, the LordOS kernel 6.18.57-lordos-rpi-2712 |
pass |
Found in this test:
xwaylandwas not in the ISO, the Pi image or the package's Recommends, so a new install could not open X11 apps; it is now in all three (tools/iso/build.sh,tools/rpi/build-img.sh,tools/iso/mkdeb.sh). The Store's update installs only dependencies, so a system updated from the Store needsxwaylandinstalled once (release notes).- The Pi image keeps 0.8.2's kernel, built before
CONFIG_INET_DIAG_DESTROY: on the Pi the firewall drops a denied connection's packets but doesn't close its socket (release notes).
Release test (0.8.2 Beta, October 19)
lordos-live-0.8.2-amd64.iso from the v0.8.2-beta tag (dcb8293, build 20261019.dcb8293e),
1 047 648 256 bytes, sha256 00d52aa1408805a869c383484f3e1ef675e6ffd42da299d63db916e76e1f4e73, built on
VM 116 with GPU=1 RELEASE=1 from a tree whose code-manifest.json was signed on the maintainer's
machine (REQUIRE_SIGNED_CODE=1); lord-server --check-code: verified, release build; make -C server test: 23 passed, 0 failed, 5 skipped (the four node suites ran on the maintainer's machine), 0 compiler
warnings. Both .deb: lintian 0 errors; both SBOMs validated with pyspdxtools. This is the first
version delivered to installed systems as an update, so the upgrade path was tested first.
| Check | Result |
|---|---|
Store → Updates on VM 120, 0.8.1 installed from the published 0.8.1 ISO (UEFI), lordos.sources only (https://lordos.org/apt): "LordOS 0.8.2 is available", the whole "What's new" with no overlapping lines |
pass |
Update from the Store (a file: copy of the final live tree, then the staging repo with the first 0.8.2 build): migration 003 only, "Restart required" → Restart Now (the sheet with the open apps) → login screen with Crystal Crown → About "Version 0.8.2 · Beta", build 20261019.dcb8293e, Verified; wallpaper aurora kept; 0 failed units; apt install --reinstall lordos runs no migration again |
pass |
apt update && apt upgrade (0.8.1 → 0.8.2): migration 003, settings.json byte-identical, restart, code verified |
pass |
install.sh --deb 0.8.1 → 0.8.2 and 0.8.0 → 0.8.2 (0.8.0 from its ISO, after apt install curl): "valid Ed25519 signature of SHA256SUMS", migrations 001–003, session.conf unchanged, settings kept, restart |
pass |
| VM 117, OVMF: boot menu, live desktop, About 0.8.2 Verified; install on the disk (en_US, Buenos Aires, 2 GB swap) in about 95 s; installed: login screen with Crystal Crown, new user on Celestial, boot 7.5 s, 0 failed units | pass |
| VM 123, SeaBIOS, standard VGA: menu at 1024×768, live desktop (VM restored afterwards) | pass |
Keys and system prompts: a Wayland test client (tools/diag/keylag-client, server/tests/keyfocus/shellkeys.sh) got 6 key presses typed into the search with the first 0.8.2 build and 0 with the fix; it gets them again when the search closes |
pass |
Disks offers smartmontools; Monitor → Disks says "No sensor" for the virtual disk; Settings → Displays → Video "Automatic" (virtual GPU: H.264); Mail, Calendar, Contacts and Reminders as lord-server --app <id> (seccomp, own scope); Monitor → Network history (1 h) and per-destination switches with Chromium; typing in Chromium; a copy of /usr/lib/lordos with one changed byte → --check-code FAILED |
pass |
Raspberry Pi 5 image, read-only on the board: 33 checks pass (kernel with BPF LSM, signed manifest, build, migrations 001–003, wallpapers, drivetemp, video extension); apt-get update against https://lordos.org/apt in temporary lists: lordos 0.8.2 arm64, SHA-256 of the released .deb |
pass |
Found in this test: Store → Discover showed no suggestions on the QEMU VM (qemu-guest-agent needs the
org.qemu.guest_agent.0 virtio port, which these VMs don't have), so that card was not seen here.
Release test (0.8.1 Beta, October 19)
lordos-live-0.8.1-amd64.iso from the v0.8.1-beta tag (7cba92d, build 20261019.7cba92d2),
1 043 156 992 bytes, sha256 04f388d6d3d252c5c51d0ff4260a553b7e3dfaf904d7c0d04b7122fce21950e4, built on
VM 116 with GPU=1; make -C server test: 23 passed, 0 failed, 3 skipped, 0 compiler warnings.
lordos_0.8.1_amd64.deb and _arm64.deb: lintian 0 errors (the known warnings). Both SBOMs validated
with pyspdxtools.
| Check | Result |
|---|---|
VM 117, OVMF: menu, splash, desktop; About "Version 0.8.1 · Beta", build 20261019.7cba92d2; lordos, lord-netperm (11 BPF programs), lord-fand active, 0 failed units |
pass |
| Crown menu → Restart…: the sheet with its countdown and the open apps, Cancel | pass |
Settings → Sharing → Remote login (SSH): installs openssh-server, port 22 open, host key fingerprint matches; off closes the port |
pass |
| Monitor → Processes (Get Info, the Quit/Force Quit sheet, cancelled), Network (Chromium's traffic counted, the map), the Dock's quick actions | pass |
| Chromium typing: no "buggy presentation feedback" lines; audio through the HDA sink with 0 errors; a per-app firewall restriction blocks and unblocks | pass |
| Install on VM 117's disk (OVMF, en_US, Buenos Aires, 2 GB swap) in about 90 s, "Restart" in one click; installed: login, services, 0 failed units, boot 7.3 s, 474 MB used | pass |
| VM 123, SeaBIOS, VMware-compatible display, 2 GB: menu at 1024×768, the timeout boots the kernel, the "no KMS display" notice on the console (0.8.0: GRUB hung) | pass |
| VM 123, SeaBIOS, standard VGA, 2 GB: menu, splash, live desktop | pass |
Upgrade with apt (VM 120, 0.8.0 from the ISO, apt-staging): 0.8.1 in 33 s, migrations 001 and 002, settings and session.conf unchanged, restart, --reinstall runs no migration again |
pass |
Upgrade with install.sh (VM 117, 0.8.0 installed from the 0.8.0 ISO): after adding apt-staging, the 0.8.0 Store's Updates lists lordos 0.8.0 → 0.8.1; install.sh --deb (the tag's file) upgrades in place, migrations 001 and 002, session.conf unchanged, settings kept (only window positions and recent apps changed, schema: 1 added), after the restart About shows 0.8.1 |
pass |
Raspberry Pi 5 image, checked read-only: LordOS kernel 6.18.57-2+lordos with BPF LSM, BTF and Yama, Bluetooth packages and helper, services enabled, SSH off, the repository and migrations; apt-get update against staging on the board in temporary lists lists lordos 0.8.1 arm64 |
pass |
Found in this test: a system installed from the 0.8.0 ISO has no curl, so the one-time
curl -fsSL https://lordos.org/install.sh | sh step needs sudo apt update && sudo apt install -y curl
first (added to the release notes, UPDATES.md and the FAQ). The 0.8.1 ISO doesn't need
that step: its package carries the repository.
Release test (0.8.0 Beta, October 18)
lordos-live-0.8.0-amd64.iso from the v0.8.0-beta tag (46c972a, build 20261018.46c972ac),
1 041 377 280 bytes, sha256 e3a370eca1c756888fd0efcc6f02def8cf6d4c99b3618b8ed3f31465074af90c, built on
VM 116 with GPU=1 in 14.5 minutes; make -C server test: 23 passed, 0 failed, 2 skipped, 0 compiler
warnings. lordos_0.8.0_amd64.deb (6.3 MB): lintian 0 errors, 14 warnings (the known ones). SBOM
validated with pyspdxtools (spdx-tools 0.8.5). Most checks were made on the build just before it
(f4f266d), which differs only in the build id and /etc/.updated; boot, About, services, audio,
network, the greeter restart and the full install were repeated with the tagged ISO.
| Check | Result |
|---|---|
| Boot menu with the LordOS theme ("LordOS 0.8.0 (live)"), splash with its bar, hand-off to the desktop without a black or text frame (recorded at 5 fps on VM 117) | pass |
About "Version 0.8.0 · Beta", build 20261018.46c972ac; Settings → General 0.8.0 |
pass |
lordos, lord-netperm (9 BPF programs, devices and Bluetooth: yes), lord-fand active; 0 failed units; ptrace_scope = 1; pipewire-pulse module loading off; remote desktop off |
pass |
Network (DHCP from lord-netd, ping) and audio (tone through the HDA sink, 0 errors in pw-top) |
pass |
Chromium and Firefox ESR open pages with the LordOS frame; Passwords opens as lord-server --app passwords (own scope, seccomp, NoNewPrivs) |
pass |
Firewall: Foot launched from the app launcher, "No internet (LAN only)" set in Settings → Privacy while it runs: a connection to the internet gets EPERM (logged by lord-netperm), the LAN still works; Monitor's per-app switch blocks it too |
pass |
| Domain rules: Settings → Privacy → Network rules by app → Add rule opens the "Block a destination" sheet | pass |
SIGPIPE: Foot killed with kill -9 while flooding output; lord-server (same pid) and the session survive; shells keep the default SIGPIPE |
pass |
systemctl restart lordos twice: exactly one login screen process (the old one is stopped) |
pass (fixed in this release) |
Live boot: 5.4 s kernel + 16.1 s userspace; 666 MB used after login; ldconfig.service no longer runs on every live boot |
pass |
| Install on VM 120 (OVMF, 24 GB): en / en_US / Buenos Aires / US / 2 GB swap, 81 s; "Restart" in one click | pass |
Installed: splash, login screen, sign in, lordos/lord-netperm/lord-fand active, 0 failed units, boot 4.3 + 3.0 s, 493 MB used, UEFI, network |
pass |
install.sh --remote-desktop on the installed VM 120: port 5673 listening, login page and a login from another machine |
pass |
Seen and left for later: the installed system's GRUB prints "Booting LordOS GNU/Linux" and
"Loading Linux …" in the theme's text box for about a second (Debian's 10_linux echoes them).
Final ISO test (0.7.0 Beta, October 18)
lordos-live-0.7.0-amd64.iso, 963 794 944 bytes, sha256
999afa4009de0a67ba980e982cdeac42c2c9121f4d1fcf945346a6852919474a, built on VM 116 from main
8941033 (new brand and Lumo) with GPU=1; make -C server test: 23 passed, 0 failed, 1 skipped
(bidi data not installed). lordos_0.7.0_amd64.deb (6.0 MB): lintian 0 errors. squashfs 843 MB,
uncompressed system 2.5 GB, build 14.5 minutes. Screenshots in docs/iso-final/.
The live checks were made on VM 117 (OVMF) with the build just before this one (sha256
881c24c3…88dd9cfd), which only lacks gsettings-desktop-schemas; the GTK app, both browsers and
the whole installation were repeated with the final ISO.
| Check | Result |
|---|---|
| Boot menu: English default, safe mode, Español, Português, copy to RAM | pass (grub, es) |
| Live user → desktop (autologin), keyboard follows the entry's language (US / LA) | pass (after fix 1) |
lordos, lord-netperm, lord-fand active; lord-fand enabled |
pass (terminal) |
lord-fand on a VM: "0 fan(s) … profile auto", Cooling says "No controllable fans" calmly |
pass |
Firewall step 2: 7 BPF programs loaded and attached to lordos.service and [email protected] |
pass |
Remote desktop off: no /etc/lordos/remote/config, port 5673 closed, toggle off in Sharing |
pass |
| Chromium 155 and Firefox ESR 153 preinstalled, open pages, LordOS frame | pass |
| GTK 3 app (Mousepad, installed with apt in the live session) with the LordOS titlebar and dark theme | pass (after fix 2) |
Passwords: separate lord-server --app passwords in its own scope, seccomp, NoNewPrivs; create, lock |
pass |
| Mail, Monitor (Cooling and Network tabs), Settings (General, Cooling, Sharing), Files, Store (73 097 packages), Terminal, About "0.7.0 · Beta" | pass |
Audio: 30 s tone through PipeWire (HDA), 0 errors in pw-top, data loop real time (FIFO 88) |
pass |
Network: DHCP from lord-netd, ping to the internet |
pass |
| ❖L lock and unlock with an empty password | pass |
| Install on VM 120 (24 GB, OVMF): en / en_US / Buenos Aires / US / 2 GB swap, ~2 minutes | pass |
Installed: login screen, sign in, services active, no live-boot or lordos user, AUTOLOGIN= empty, groups, UEFI, network, Chromium, Firefox, audio |
pass |
Idle (after a minute without input):
Used RAM (free) |
CPU idle (vmstat) |
Boot | |
|---|---|---|---|
| Live, VM 117 (4 GB, 4 cores) | 465 MB | 99 % | 16.3 s (4.9 kernel + 11.4 userspace) |
| Installed, VM 120 (4 GB, 4 cores) | 487 MB | 99 % | — |
Fixes made in this test:
- English live session with the Latin American keyboard. The SDK's default layout is
latam, andlordos-live-preponly wrote the language. It now also writeskeyboardsfor the live user from the boot entry: English →us, Español →latam, Português →br. - GTK 3 apps drew light Adwaita. lord-server writes
gtk-themeto the GSettings keyfile, but withoutgsettings-desktop-schemasGTK 3 can't read it. The ISO installs it and the package recommends it. - Package copyright said the license was undefined; it now carries the MIT text and lists Plus Jakarta Sans with the other OFL fonts.
Noted then, fixed for 0.7.0-beta: Notes stored its notes in ~/Notas, a Spanish folder name that
also appeared in English sessions. It now uses ~/Notes and moves ~/Notas there on first run
(docs/NOTES.md).
Tests (VM 117 lordos-live, Proxmox)
VM 117 has 4 GB of RAM, 4 cores, q35, vga: virtio, an HDA sound card and the ISO as a CD. It also
has a 24 GB scsi0 disk, left over from an earlier installer test, with an old installation on it.
It boots from the CD first.
- SeaBIOS: boots on its own into LordOS;
systemd-analyzegives 11.8 s (4.3 s kernel and 7.5 s userspace). Working:- the Terminal;
- PipeWire, which sees the HDA card:
wpctl statuslists the output and the input, and LordOS as a client; - Settings, Files and the Store;
- the network, with LordOS's own DHCP: IP, route, DNS and internet access.
- OVMF (UEFI), with the efidisk without preloaded keys (Secure Boot off): boots on its own into
LordOS (
/sys/firmware/efipresent) in 12.5 s, with the network and the rest the same as with BIOS. - Installation to disk (24 GB, OVMF): the full assistant in ~3 minutes; afterwards it boots from the disk via UEFI and SeaBIOS, logs in on its own with the created user, with network (DHCP), sound (HDA), 2 GB swap, es_AR, America/Argentina/Buenos_Aires and the Latin American keyboard;
sudoasks for the chosen password;live-bootand thelordosuser are gone. - "Restart" when finished (bug found on VM 120): after installing, the first click did nothing and the second left a black screen without restarting. The cause was the recursive
bindof/dev,/proc,/sysand/runfor the chroot: with systemd those mounts are shared, so unmounting the target also unmounted the live system's/run/live/medium. From then on the live system lost files and the action answered "only from the live system". Now thebinds are slaves (MS_SLAVE). Also:install-rebootlaunchessystemctl --no-block rebootfrom a separate process and doesn't wait. If nothing has ended it after 20 s, it doessync+reboot(2);lordos.servicehasTimeoutStopSec=5;- the button shows "Restarting…". Measured on VM 117 after the fix: a single click, shutdown completes and after ~5 s the firmware is already up.
- Bugs found and fixed along the way:
- Network down:
live-bootwrites/etc/network/interfaceswith the interface on DHCP. LordOS reads that as "managed by ifupdown" (even though ifupdown isn't there) and didn't touch it, so the network stayed down. Nowlordos-live-prepleaves that file with onlylowhen there's no ifupdown. I triedip=frommedia, but Debian's initramfs takes it as an interface name and wastes a few seconds looking for it. - No
pingfor the user: the executable'scap_net_rawcapability doesn't survive on the live system.ping_group_rangewas added. - Menu borders as "?":
loadfont unicodewas missing fromgrub.cfg. - PipeWire without real time:
rtkitwas missing. - The service didn't restart:
systemctl restart lordoswaited for the terminals, which are designed to outlive the server. Now it usesKillMode=process. - Missing symbols: some Settings icons (◐ ▣ ◧) came out blank. Now the ISO ships
fonts-dejavu-core.
- Network down:
Pending
- Secure Boot: sign with shim and our own MOK, or with Debian's shim plus a signed grub. Today Secure Boot has to be turned off.
- Switching consoles (Ctrl+Alt+F2) while LordOS runs (still not possible, see
SESSIONS.md). - Optional persistence on the USB stick (live-boot's
persistence). (The installer to disk is done: "Installing to disk" above.) - Keyboard:
lordos-live-prepsets the live user's layout from the boot entry's language (English: US, Español: Latin American, Português: Brazilian) and it's changed in Settings → Keyboard. A selector on first boot is missing. - Real GPU (AMD/Nvidia): to be tested with the ISO on real hardware. The GPU path is built
(
GPU.md); the ISO ships Mesa and the firmware, and the "safe mode" entry passesLORD_GPU=0. - Network robustness:
net/state.ctakes/etc/network/interfacesas a sign of ifupdown even when ifupdown isn't installed. It should also check that/sbin/ifupexists. Today the ISO works around it inlordos-live-prep. - Audio diagnostic tools (
pactl) aren't included;wpctl statusis. Network before the first loginandfolders of the installed user: fixed in M9. The network belongs to the system (lord-netd, started bylord-sessiondat boot; seeNETWORK.md) and the installer creates Desktop, Documents, Downloads, Music, Pictures and Videos in the chosen language (in Spanish: Escritorio, Documentos, Descargas, Música, Imágenes, Videos), with~/.config/user-dirs.dirs(server/src/users/homedirs.c, the same list as Settings → Users andlordos-live-prep). Still to be repeated with a new ISO installed to disk.- First mouse movement after unlocking: on VM 117, the first absolute QMP event after ❖L/Enter left the cursor at the top (y≈8). The following ones worked fine. Not investigated.
For VM-SETUP.md
M8 step (live ISO), on the development VM:
sudo apt-get install -y --no-install-recommends debootstrap squashfs-tools xorriso grub-pc-bin \
grub-efi-amd64-bin grub-common mtools dosfstools lintian libssl-dev libsrtp2-dev libusrsctp-dev
In Proxmox, VM 117 lordos-live is used to test the ISO. It has 4 GB, 4 cores, q35, vga: virtio,
audio0: ich9-intel-hda, OVMF with an efidisk and the ISO at
local:iso/lordos-live-<version>-amd64.iso. For BIOS: qm set 117 --bios seabios.

































