Transforms complex documents like PDFs and Office docs into LLM-ready markdown/JSON for your Agentic workflows.
Python ai4sciencedocument-analysisdocxextract-datalayout-analysisocrparserpdfpdf-converterpdf-extractor-llmpdf-extractor-pretrainpdf-extractor-ragpdf-parserpptxpythonxlsx
fix(vlm): optimize AMD RDNA performance with Triton kernel implementations and handle Lora tokenizer errors
myhloli7a42cbfc3ac4
diff --git a/docs/zh/usage/acceleration_cards/AMD.md b/docs/zh/usage/acceleration_cards/AMD.mdindex 4f4341bb..226920b1 100644--- a/docs/zh/usage/acceleration_cards/AMD.md+++ b/docs/zh/usage/acceleration_cards/AMD.md@@ -3,367 +3,4 @@> 安装或升级时必须保留 `mineru<4`;已有固定版本、提交或厂商镜像继续按原方案使用,不要替换为 4.0 的安装命令。> 通用说明见[旧平台版本约束](../compatibility.md)。-## 基于Triton的ROCm 不同后端实现优化,基本实现vllm后端正常推理,以及pipeline后端中第一步layout用的DocLayout-YOLO--**已有完整python vllm和mineru环境直接跳转第五步!!!**-**其他GPU执行问题可以参考,先prof查看定位找到哪个算子问题,然后triton后端实现即可**-测试了一下,基本和MinerU官网效果差不多,用AMD的人也不是很多,就在评论区分享给大家了--### 1.结果介绍-**补充一个200页的PDF python编程书测试一下速度,可以到1.99it/s:**-Two Step Extraction: 100%|████████████████████████████████████████| 200/200 [01:40<00:00, 1.99it/s]--**下面为之前14学术论文测试结果:**-7900xtx 使用 `mineru-gradio --server-name 0.0.0.0 --server-port 7860 --enable-vllm-engine true` 时速度大概为**1.6-1.8s/it**,没有仔细测试,简单试了两个文档。第二种矩阵乘法代替原来的dots点乘可以进一步提速到1.3s/it,优化后的主要算子耗时在hipblast(这个没法提升了)和vllm triton后端,各占25%耗时吧,vllm tirion后端这个这个只能等官方优化了。。。。-doclayout-yolo的layout速度从原来的1.6it/s提高到15it/s,注意需要缓存一下输入的pdf尺寸后,triton必须要缓存尺寸没办法。主要是为了保留模型输入输出接口,最小代码改动。-采用-b vlm-vllm-engine模式举个例子------**测试结果为优化为5d矩阵乘代替原来的点积结果:**-2025-10-05 15:45:12.985 | INFO | mineru.backend.vlm.vlm_analyze:get_model:128 - get vllm-engine predictor cost: 18.45s-Adding requests: 100%|████████████████████████████████████████████████████████████████████████████████| 14/14 [00:01<00:00, 12.20it/s]-Processed prompts: 100%|█████████████████████| 14/14 [00:08<00:00, 1.56it/s, est. speed input: 2174.18 toks/s, output: 791.87 toks/s]-Adding requests: 100%|█████████████████████████████████████████████████████████████████████████████| 278/278 [00:00<00:00, 323.03it/s]-Processed prompts: 100%|██████████████████| 278/278 [00:07<00:00, 37.63it/s, est. speed input: 5264.66 toks/s, output: 2733.31 toks/s]--`mineru-gradio --server-name 0.0.0.0 --server-port 7860 --enable-vllm-engine true` 测试:-2025-10-05 15:46:55.953 | WARNING | mineru.cli.common:convert_pdf_bytes_to_bytes_by_pypdfium2:54 - end_page_id is out of range, use pdf_docs length-Two Step Extraction: 100%|████████████████████████████████████████████████████████████████████████████| 14/14 [00:18<00:00, 1.30s/it]-------### 2.原因介绍-AMD RDNA使用vllm后端有严重的性能问题,原因是因为vllm的**qwen2_vl.py**中有一个算子在rocm kernel上没有对应的实现,导致性能出现严重的卷积计算回退,一次执行花了12s,。。。。。。。。一言难尽。即**MIOpen 库中缺少模型中特定 Conv3d(bfloat16) 的优化内核**。-DocLayout-YOLO的**g2l_crm.py**空洞卷积也是这个问题,专业的CDNA MI210也没解决这个问题-正好一起处理了。-------### 3.环境介绍-System: Ubuntu 24.04.3 Kernel: Linux 6.14.0-33-generic ROCm version: 7.0.1-python环境:-python 3.12-pytorch-triton-rocm 3.5.0+gitbbb06c03-torch 2.10.0.dev20251001+rocm7.0-torchvision 0.25.0.dev20251003+rocm7.0-vllm 0.11.0rc2.dev198+g736fbf4c8.rocm701-不同版本无所谓,处理方法是一样的。-------### 4.前置环境安装-```-uv venv --python python3.12-source .venv/bin/activate-uv pip install --pre torch torchvision -i https://pypi.tuna.tsinghua.edu.cn/simple/ --extra-index-url https://download.pytorch.org/whl/nightly/rocm7.0-uv pip install pip-# 避免覆盖我们本地的pytorch,改用pip而没有继续使用uv pip-pip install -U "mineru[core]<4" -i https://pypi.mirrors.ustc.edu.cn/simple/-```-vllm 安装参考官方手册[Vllm](https://docs.vllm.com.cn/en/latest/getting_started/installation/gpu.html#amd-rocm)-```-#手动安装aiter,vllm,amd-smi等,自行找一个位置clone,然后进入该目录吧-git clone --recursive https://github.com/ROCm/aiter.git-cd aiter-git submodule sync; git submodule update --init --recursive-python setup.py develop-cd ..-git clone https://github.com/vllm-project/vllm.git-cd vllm/-cp -r /opt/rocm/share/amd_smi ~/Pytorch/vllm/-pip install amd_smi/-pip install --upgrade numba \- scipy \- huggingface-hub[cli,hf_transfer] \- setuptools_scm-pip install -r requirements/rocm.txt-export PYTORCH_ROCM_ARCH="gfx1100" #根据自己的GPU架构 rocminfo | grep gfx-python setup.py develop-```------### 5.vllm中关键triton算子添加-#### 这里我给出两种解决方法,第一种解决方法就是前面提到的优化到1.5到1.8s/it,第二种方法有手动优化算子到矩阵乘法,7900xtx肯定适用,大概1.3s/it,其他AMD GPU相对方案一也有提速,但是不一定是最佳速度实现,里面的手动部分可能需要微调。-**注意pip把triton 后端的flash_attn卸载了,搞了半天各种尝试还是报错,问题比较大,直接不用就行了**-```-#定位自己vllm位置XXX-pip show vllm-```-**关键更改**-XXX/vllm/model_executor/models/qwen2_vl.py文件:-**1.qwen2_vl.py文件33行下增加from .qwen2_vl_vision_kernels import triton_conv3d_patchify**-```-from collections.abc import Iterable, Mapping, Sequence-from functools import partial-from typing import Annotated, Any, Callable, Literal, Optional, Union--import torch-import torch.nn as nn-import torch.nn.functional as F-from .qwen2_vl_vision_kernels import triton_conv3d_patchify-```-**接下来分为方案一(2.1和3.1)和方案二(2.2和3.2),选取一种实现即可**------**方案1**-**2.1qwen2_vl.py文件498行class Qwen2VisionPatchEmbed(nn.Module),PS.就是这玩意AMD没有现成的内核算子导致回退**-```-class Qwen2VisionPatchEmbed(nn.Module):-- def __init__(- self,- patch_size: int = 14,- temporal_patch_size: int = 2,- in_channels: int = 3,- embed_dim: int = 1152,- ) -> None:- super().__init__()- self.patch_size = patch_size- self.temporal_patch_size = temporal_patch_size- self.embed_dim = embed_dim-- kernel_size = (temporal_patch_size, patch_size, patch_size)- self.proj = nn.Conv3d(in_channels,- embed_dim,- kernel_size=kernel_size,- stride=kernel_size,- bias=False)- def forward(self, x: torch.Tensor) -> torch.Tensor:- L, C = x.shape- x_reshaped = x.view(L, -1, self.temporal_patch_size, self.patch_size,- self.patch_size)-- # Call your custom Triton kernel instead of self.proj- x_out = triton_conv3d_patchify(x_reshaped, self.proj.weight)-- # The output of our kernel is already the correct shape [L, embed_dim]- return x_out-```-**3.1XXX/vllm/model_executor/models/目录下创建qwen2_vl_vision_kernels.py文件,用triton实现**-```-import torch-from vllm.triton_utils import tl, triton--def _conv3d_patchify_kernel(- # Pointers to tensors- X, W, Y,- # Tensor dimensions- N, C_in, D_in, H_in, W_in,- C_out, KD, KH, KW,- # Stride and padding for memory access- stride_xn, stride_xc, stride_xd, stride_xh, stride_xw,- stride_wn, stride_wc, stride_wd, stride_wh, stride_ww,- stride_yn, stride_yc,- # Triton-specific metaparameters- BLOCK_SIZE: tl.constexpr,-):- """- Triton kernel for a non-overlapping 3D patching convolution.- Each kernel instance computes one output value for one patch.- """- # Get the program IDs for the N (patch) and C_out (output channel) dimensions- pid_n = tl.program_id(0) # The index of the patch we are processing- pid_cout = tl.program_id(1) # The index of the output channel we are computing-- # --- Calculate memory pointers ---- # Pointer to the start of the current input patch- x_ptr = X + (pid_n * stride_xn)- # Pointer to the start of the current filter (weight)- w_ptr = W + (pid_cout * stride_wn)- # Pointer to where the output will be stored- y_ptr = Y + (pid_n * stride_yn + pid_cout * stride_yc)-- # --- Perform the convolution (element-wise product and sum) ---- # This is a dot product between the flattened patch and the flattened filter.- accumulator = tl.zeros((BLOCK_SIZE,), dtype=tl.float32)-- # Iterate over the elements of the patch/filter- for c_offset in range(0, C_in):- for d_offset in range(0, KD):- for h_offset in range(0, KH):- # Unrolled loop for the innermost dimension (width) for performance- for w_offset in range(0, KW, BLOCK_SIZE):- # Create masks to handle cases where KW is not a multiple of BLOCK_SIZE- w_range = w_offset + tl.arange(0, BLOCK_SIZE)- w_mask = w_range < KW-- # Calculate offsets to load data- patch_offset = (c_offset * stride_xc + d_offset * stride_xd +- h_offset * stride_xh + w_range * stride_xw)- filter_offset = (c_offset * stride_wc + d_offset * stride_wd +- h_offset * stride_wh + w_range * stride_ww)-- # Load patch and filter data, applying masks- patch_vals = tl.load(x_ptr + patch_offset, mask=w_mask, other=0.0)- filter_vals = tl.load(w_ptr + filter_offset, mask=w_mask, other=0.0)-- # Multiply and accumulate- accumulator += patch_vals.to(tl.float32) * filter_vals.to(tl.float32)-- # Sum the accumulator block and store the single output value- output_val = tl.sum(accumulator, axis=0)- tl.store(y_ptr, output_val)---def triton_conv3d_patchify(x: torch.Tensor, weight: torch.Tensor) -> torch.Tensor:- """- Python wrapper for the 3D patching convolution Triton kernel.- """- # Get tensor dimensions- N, C_in, D_in, H_in, W_in = x.shape- C_out, _, KD, KH, KW = weight.shape-- # Create the output tensor- # The output of this specific conv is (N, C_out, 1, 1, 1), which we squeeze- Y = torch.empty((N, C_out), dtype=x.dtype, device=x.device)-- # Define the grid for launching the Triton kernel- # Each kernel instance handles one patch (N) for one output channel (C_out)- grid = (N, C_out)-- # Launch the kernel- # We pass all strides to make the kernel flexible- _conv3d_patchify_kernel[grid](- x, weight, Y,- N, C_in, D_in, H_in, W_in,- C_out, KD, KH, KW,- x.stride(0), x.stride(1), x.stride(2), x.stride(3), x.stride(4),- weight.stride(0), weight.stride(1), weight.stride(2), weight.stride(3), weight.stride(4),- Y.stride(0), Y.stride(1),- BLOCK_SIZE=16, # A reasonable default, can be tuned- )-- return Y-```-----**方案2**-**2.2qwen2_vl.py文件498行class Qwen2VisionPatchEmbed(nn.Module)函数,PS.就是这玩意AMD没有现成的内核算子导致回退,这里我们直接5D张量一步到位,改为矩阵乘法**-```-class Qwen2VisionPatchEmbed(nn.Module):-- def __init__(- self,- patch_size: int = 14,- temporal_patch_size: int = 2,- in_channels: int = 3,- embed_dim: int = 1152,- ) -> None:- super().__init__()- self.patch_size = patch_size- self.temporal_patch_size = temporal_patch_size- self.embed_dim = embed_dim-- kernel_size = (temporal_patch_size, patch_size, patch_size)-- self.proj = nn.Conv3d(in_channels,- embed_dim,- kernel_size=kernel_size,- stride=kernel_size,- bias=False)-- def forward(self, x: torch.Tensor) -> torch.Tensor:- L, C = x.shape- x_reshaped_5d = x.view(L, -1, self.temporal_patch_size, self.patch_size,- self.patch_size)-- return triton_conv3d_patchify(x_reshaped_5d, self.proj.weight)-```-**3.2XXX/vllm/model_executor/models/目录下创建qwen2_vl_vision_kernels.py文件,用triton实现**-```-import torch-from vllm.triton_utils import tl, triton--def _conv_gemm_kernel(- A, B, C, M, N, K,- stride_am, stride_ak,- stride_bk, stride_bn,- stride_cm, stride_cn,- BLOCK_M: tl.constexpr, BLOCK_N: tl.constexpr, BLOCK_K: tl.constexpr,-):- pid_m = tl.program_id(0)- pid_n = tl.program_id(1)- offs_m = pid_m * BLOCK_M + tl.arange(0, BLOCK_M)- offs_n = pid_n * BLOCK_N + tl.arange(0, BLOCK_N)- offs_k = tl.arange(0, BLOCK_K)- a_ptrs = A + (offs_m[:, None] * stride_am + offs_k[None, :] * stride_ak)- b_ptrs = B + (offs_k[:, None] * stride_bk + offs_n[None, :] * stride_bn)- accumulator = tl.zeros((BLOCK_M, BLOCK_N), dtype=tl.float32)- for k in range(0, K, BLOCK_K):- a = tl.load(a_ptrs, mask=(offs_m[:, None] < M) & (offs_k[None, :] < K), other=0.0)- b = tl.load(b_ptrs, mask=(offs_k[:, None] < K) & (offs_n[None, :] < N), other=0.0)- accumulator += tl.dot(a, b)- a_ptrs += BLOCK_K * stride_ak- b_ptrs += BLOCK_K * stride_bk- offs_k += BLOCK_K- c = accumulator.to(C.dtype.element_ty)- offs_cm = pid_m * BLOCK_M + tl.arange(0, BLOCK_M)- offs_cn = pid_n * BLOCK_N + tl.arange(0, BLOCK_N)- c_ptrs = C + stride_cm * offs_cm[:, None] + stride_cn * offs_cn[None, :]- c_mask = (offs_cm[:, None] < M) & (offs_cn[None, :] < N)- tl.store(c_ptrs, c, mask=c_mask)--def triton_conv3d_patchify(x_5d: torch.Tensor, weight_5d: torch.Tensor) -> torch.Tensor:- N_patches, _, _, _, _ = x_5d.shape- C_out, _, _, _, _ = weight_5d.shape- A = x_5d.view(N_patches, -1)- B = weight_5d.view(C_out, -1).transpose(0, 1).contiguous()- M, K = A.shape- _K, N = B.shape- assert K == _K- C = torch.empty((M, N), device=A.device, dtype=A.dtype)-- # --- 针对7900xtx的手动调优配置,其他GPU的最优组合可能需要自行寻找,AMD的autotune效果就是没有效果 ---- best_config = {- 'BLOCK_M': 128,- 'BLOCK_N': 128,- 'BLOCK_K': 32,- }- num_stages = 4- num_warps = 8-- grid = (triton.cdiv(M, best_config['BLOCK_M']),- triton.cdiv(N, best_config['BLOCK_N']))-- _conv_gemm_kernel[grid](- A, B, C,- M, N, K,- A.stride(0), A.stride(1),- B.stride(0), B.stride(1),- C.stride(0), C.stride(1),- **best_config,- num_stages=num_stages,- num_warps=num_warps- )-- return C-```-----**4.关闭终端后再次使用 `mineru-gradio` 会报一个 Lora 错误,修改代码跳过它**-```-pip show mineru_vl_utils-```--打开该文件XXX/mineru_vl_utils/vlm_client/vllm_async_engine_client.py修改第58行self.tokenizer = vllm_async_llm.tokenizer.get_lora_tokenizer()为:-```- try:- self.tokenizer = vllm_async_llm.tokenizer.get_lora_tokenizer()- except AttributeError:- # 如果没有 get_lora_tokenizer 方法,直接使用原始 tokenizer- self.tokenizer = vllm_async_llm.tokenizer-```--**最后整两个环境变量后愉快玩耍即可**-```-export MINERU_MODEL_SOURCE=modelscope-export TORCH_ROCM_AOTRITON_ENABLE_EXPERIMENTAL=1-```------### 6.vllm后端已经没有问题,下面是pipeline 中layout用的doclayout-yolo模型空洞卷积问题-### 我在 [DocLayout-YOLO](https://github.com/opendatalab/DocLayout-YOLO/issues/120#issuecomment-3368144275) 下做了一个回答,因此 pipeline 的空洞卷积问题不在这里赘述,直接点击链接查看即可。-查看自己doclayout-yolo安装位置如下,然后进入修改链接中回复介绍的文件即可-```-pip show doclayout-yolo-```+https://github.com/opendatalab/MinerU/discussions/3662\ No newline at end of file