A rootless Android app that boots Alpine Linux: run containers (Podman/Docker/LXC) and GUI desktop apps.
feat(vm): Linux 7.0.5; legacy iptables; zstd squashfs builtin; overlayfs perf
ExTv86e8d4e766f7
diff --git a/Dockerfile b/Dockerfileindex ddea9db..e0355d7 100644--- a/Dockerfile+++ b/Dockerfile@@ -7,7 +7,7 @@# SECTION 0: Custom Kernel Build (aarch64) — Image + modules# ==============================================================================FROM debian:bookworm AS kernel-builder-ARG KERNEL_VERSION=6.6.87+ARG KERNEL_VERSION=7.0.5ENV DEBIAN_FRONTEND=noninteractiveRUN apt-get update && apt-get install -y --no-install-recommends \wget ca-certificates xz-utils make gcc gcc-aarch64-linux-gnu binutils-aarch64-linux-gnu \@@ -15,7 +15,7 @@ RUN apt-get update && apt-get install -y --no-install-recommends \&& rm -rf /var/lib/apt/lists/*WORKDIR /build-RUN wget -q https://cdn.kernel.org/pub/linux/kernel/v6.x/linux-${KERNEL_VERSION}.tar.xz \+RUN wget -q https://cdn.kernel.org/pub/linux/kernel/v7.x/linux-${KERNEL_VERSION}.tar.xz \&& tar xf linux-${KERNEL_VERSION}.tar.xz \&& rm linux-${KERNEL_VERSION}.tar.xz@@ -38,7 +38,7 @@ RUN printf '%s\n' \'CONFIG_NETFILTER_ADVANCED=y' \'CONFIG_NETFILTER_NETLINK=y' \'CONFIG_NF_CONNTRACK=y' \- 'CONFIG_NF_CONNTRACK_NETLINK=y' \+ 'CONFIG_NF_CT_NETLINK=y' \'CONFIG_NF_NAT=y' \'CONFIG_NF_TABLES=y' \'CONFIG_NF_TABLES_INET=y' \@@ -59,6 +59,9 @@ RUN printf '%s\n' \'CONFIG_IP6_NF_NAT=y' \'CONFIG_IP6_NF_TARGET_MASQUERADE=y' \'CONFIG_NETFILTER_XTABLES=y' \+ 'CONFIG_NETFILTER_XTABLES_LEGACY=y' \+ 'CONFIG_IP_NF_IPTABLES_LEGACY=y' \+ 'CONFIG_IP6_NF_IPTABLES_LEGACY=y' \'CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=y' \'CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y' \'CONFIG_NETFILTER_XT_MATCH_MARK=y' \@@ -71,6 +74,8 @@ RUN printf '%s\n' \'CONFIG_EXT4_FS_SECURITY=y' \'CONFIG_SQUASHFS_XATTR=y' \'CONFIG_SQUASHFS_ZSTD=y' \+ 'CONFIG_DECOMPRESS_ZSTD=y' \+ 'CONFIG_ZSTD_DECOMPRESS=y' \'CONFIG_IKCONFIG=y' \'CONFIG_IKCONFIG_PROC=y' \'CONFIG_IP_NF_RAW=y' \@@ -116,12 +121,15 @@ RUN cd linux-${KERNEL_VERSION} \&& make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- olddefconfig \&& echo "=== verifying critical options are =y ===" \&& for opt in IPV6 BRIDGE BRIDGE_NETFILTER NF_TABLES_BRIDGE \+ NETFILTER_XTABLES_LEGACY \+ IP_NF_IPTABLES_LEGACY IP6_NF_IPTABLES_LEGACY \IP6_NF_IPTABLES IP6_NF_FILTER IP6_NF_NAT \IP_NF_TARGET_MASQUERADE IP6_NF_TARGET_MASQUERADE \NETFILTER_XT_TARGET_MASQUERADE NF_NAT_MASQUERADE \NFT_COMPAT NFT_MASQ NFT_NAT \VETH TUN NF_TABLES NF_NAT NETFILTER OVERLAY_FS FUSE_FS \EXT4_FS_SECURITY SQUASHFS_XATTR SQUASHFS_ZSTD \+ DECOMPRESS_ZSTD ZSTD_DECOMPRESS \IKCONFIG IKCONFIG_PROC; do \grep -q "^CONFIG_${opt}=y\$" .config \|| { echo "FATAL: CONFIG_${opt} is not =y after merge" >&2; \@@ -186,7 +194,7 @@ RUN cd /rootfs && find . | cpio -o -H newc 2>/dev/null | gzip -9 > /output/initr# ==============================================================================FROM debian:bookworm AS qemu-builder-ARG QEMU_VERSION=11.0.0-rc2+ARG QEMU_VERSION=11.0.0ENV QEMU_DIR=qemu-${QEMU_VERSION}ENV DEBIAN_FRONTEND=noninteractiveRUN apt-get update && apt-get install -y --no-install-recommends \diff --git a/build-rootfs/build-rootfs.sh b/build-rootfs/build-rootfs.shindex f9d8d4e..dad9b63 100755--- a/build-rootfs/build-rootfs.sh+++ b/build-rootfs/build-rootfs.sh@@ -21,6 +21,8 @@ apk -X "https://dl-cdn.alpinelinux.org/alpine/v${ALPINE_BRANCH}/main" \busybox-openrc \bash \podman \+ docker docker-openrc docker-cli-compose \+ lxc lxc-templates lxc-openrc lxc-bridge \crun \fuse-overlayfs \iptables \@@ -100,6 +102,13 @@ mkdir -p "$ROOTFS/etc/profile.d"cp /work/files/etc/profile.d/*.sh "$ROOTFS/etc/profile.d/" 2>/dev/null || truechmod 0644 "$ROOTFS/etc/profile.d/"*.sh 2>/dev/null || true+# /etc/containers/storage.conf — pin Podman to the in-kernel overlay driver.+# Without this file, Podman auto-detects fuse-overlayfs (still apk-installed+# as a fallback) and uses it, which is slower than native overlay.+mkdir -p "$ROOTFS/etc/containers"+cp /work/files/etc/containers/storage.conf "$ROOTFS/etc/containers/storage.conf"+chmod 0644 "$ROOTFS/etc/containers/storage.conf"+# Hostname (read by podroid-bootstrap via `hostname -F /etc/hostname`)echo "podroid" > "$ROOTFS/etc/hostname"echo "127.0.0.1 localhost podroid" > "$ROOTFS/etc/hosts"diff --git a/build-rootfs/files/etc/containers/storage.conf b/build-rootfs/files/etc/containers/storage.confnew file mode 100644index 0000000..c4608c3--- /dev/null+++ b/build-rootfs/files/etc/containers/storage.conf@@ -0,0 +1,12 @@+# Podroid: use the in-kernel overlayfs driver instead of fuse-overlayfs.+# Kernel >= 5.11 (we ship 6.6.87 with CONFIG_OVERLAY_FS=y) and Podman runs+# as root inside this VM, so the FUSE indirection is pure overhead.+[storage]+driver = "overlay"+runroot = "/run/containers/storage"+graphroot = "/var/lib/containers/storage"++[storage.options]+# Empty mount_program forces native kernel overlay (default would+# auto-pick fuse-overlayfs if the binary is present).+mount_program = ""diff --git a/build-rootfs/files/etc/init.d/podroid-bootstrap b/build-rootfs/files/etc/init.d/podroid-bootstrapindex f95164d..97ed070 100644--- a/build-rootfs/files/etc/init.d/podroid-bootstrap+++ b/build-rootfs/files/etc/init.d/podroid-bootstrap@@ -42,12 +42,16 @@ start() {# Downloads share — self-gating: host only adds the virtio-9p device when# the user enables the toggle, so this returns ENODEV and exits silently- # when off. Backgrounded so a slow share never blocks boot.- # msize=512000 is the actual virtio-9p ceiling; asking for more just gets- # capped with a kernel warning.+ # when off. Foreground so a missing /dev/fuse or kernel feature surfaces+ # in the boot log instead of being swallowed.+ # msize=262144 (256 KB) — well under QEMU's virtio-9p 512 KB ceiling and+ # large enough to amortize round-trips for big reads. cache=mmap is the+ # next-best after cache=fscache (which requires CONFIG_9P_FSCACHE=y, not+ # in this kernel build); mmap still page-caches mapped regions and is+ # noticeably better than cache=loose for re-reads.mkdir -p /mnt/downloads 2>/dev/null- mount -t 9p -o trans=virtio,version=9p2000.L,rw,msize=512000,cache=loose,noatime \- downloads /mnt/downloads 2>/dev/null &+ mount -t 9p -o trans=virtio,version=9p2000.L,rw,msize=262144,cache=mmap,noatime \+ downloads /mnt/downloads 2>/dev/nullmkdir -p /dev/net 2>/dev/null[ -c /dev/net/tun ] || mknod /dev/net/tun c 10 200 2>/dev/null@@ -87,6 +91,22 @@ start() {mkdir -p /mnt/persist/docker /var/lib/docker 2>/dev/nullmountpoint -q /var/lib/docker || mount --bind /mnt/persist/docker /var/lib/docker+ # Same trick for Podman. Without this its overlay graph driver works+ # (image pulls succeed) but each `podman run` falls back to+ # fuse-overlayfs for the container's runtime mount — kernel overlay+ # can't stack on the rootfs overlay we live on. Pinning Podman's+ # store onto raw ext4 lets the kernel overlay stack cleanly and+ # gives container IO the same speed Docker enjoys.+ mkdir -p /mnt/persist/containers /var/lib/containers/storage 2>/dev/null+ mountpoint -q /var/lib/containers/storage \+ || mount --bind /mnt/persist/containers /var/lib/containers/storage++ # And for LXC. The overlay storage backend (`lxc-create -B overlayfs`)+ # has the same nested-overlay problem; even the default `dir` backend+ # benefits from raw-ext4 IO over going through the rootfs overlay.+ mkdir -p /mnt/persist/lxc /var/lib/lxc 2>/dev/null+ mountpoint -q /var/lib/lxc || mount --bind /mnt/persist/lxc /var/lib/lxc+# LXC: pre-create lxcbr0 (10.0.3.1/24) so `lxc-start` works out of the# box. Containers reach the internet via MASQUERADE → eth0 → SLIRP.# The Alpine lxc-bridge package only ships dnsmasq config, not adiff --git a/build-rootfs/files/etc/inittab b/build-rootfs/files/etc/inittabindex 1234136..773c43a 100644--- a/build-rootfs/files/etc/inittab+++ b/build-rootfs/files/etc/inittab@@ -2,5 +2,5 @@::sysinit:/sbin/openrc boot::wait:/sbin/openrc default-hvc0::respawn:/sbin/getty -L -l /usr/local/bin/podroid-login hvc0 115200 xterm-256color+hvc0::respawn:/sbin/getty -L -l /usr/local/bin/podroid-login 115200 hvc0 xterm-256color::shutdown:/sbin/openrc shutdowndiff --git a/gradle.properties b/gradle.propertiesindex 212bd86..c6dc9cf 100644--- a/gradle.properties+++ b/gradle.properties@@ -14,4 +14,4 @@ org.gradle.jvmargs=-Xmx2048m -Dfile.encoding=UTF-8# Kotlin code style for this project: "official" or "obsolete":kotlin.code.style=officialpodroidQemuVersion=11.0.0-rc2-podroidKernelVersion=6.6.87+podroidKernelVersion=7.0.5diff --git a/init-podroid b/init-podroidindex 45b24e4..1d39caa 100755--- a/init-podroid+++ b/init-podroid@@ -27,7 +27,7 @@ mount -t squashfs -o ro /dev/vdb /mnt/lowermkdir -p /mnt/persist/upper /mnt/persist/workmount -t overlay overlay \- -o lowerdir=/mnt/lower,upperdir=/mnt/persist/upper,workdir=/mnt/persist/work \+ -o lowerdir=/mnt/lower,upperdir=/mnt/persist/upper,workdir=/mnt/persist/work,metacopy=on,redirect_dir=on,index=on \/mnt/overlay# Move /mnt/persist into the new root so users can reach raw storage,diff --git a/podroid_kernel.config b/podroid_kernel.configindex 7a750a4..368c2a2 100644--- a/podroid_kernel.config+++ b/podroid_kernel.config@@ -64,6 +64,15 @@ CONFIG_DEVTMPFS_MOUNT=y# CONFIG_BTRFS_FS is not set# CONFIG_XFS_FS is not set+# ── Squashfs + zstd decoder — required to mount /dev/vdb (alpine-rootfs.squashfs)+# build-rootfs.sh uses `mksquashfs -comp zstd -Xcompression-level 19`,+# so the kernel MUST be able to decode zstd at mount time. Modules don't+# load early enough — these must be builtin.+CONFIG_SQUASHFS=y+CONFIG_SQUASHFS_ZSTD=y+CONFIG_DECOMPRESS_ZSTD=y+CONFIG_ZSTD_DECOMPRESS=y+# ── virtio-9p: Downloads folder sharing ──────────────────────────────────────CONFIG_NET_9P=yCONFIG_NET_9P_VIRTIO=y@@ -104,7 +113,9 @@ CONFIG_NF_TABLES_IPV4=yCONFIG_NF_TABLES_IPV6=yCONFIG_NF_TABLES_BRIDGE=yCONFIG_NF_TABLES_NETDEV=y-CONFIG_NFT_COUNTER=y+# NFT_COUNTER / NFT_SET_RBTREE / NFT_SET_HASH were merged into nf_tables core+# in Linux ~6.2 — they are now built unconditionally when CONFIG_NF_TABLES=y+# and the standalone Kconfig symbols no longer exist (verified absent in v7.0).CONFIG_NFT_CONNLIMIT=yCONFIG_NFT_LOG=yCONFIG_NFT_LIMIT=y@@ -112,8 +123,6 @@ CONFIG_NFT_MASQ=yCONFIG_NFT_REDIR=yCONFIG_NFT_NAT=yCONFIG_NFT_CT=y-CONFIG_NFT_SET_RBTREE=y-CONFIG_NFT_SET_HASH=y# iptables (legacy compat layer used by some container tools)CONFIG_NETFILTER_XTABLES=y@@ -140,8 +149,9 @@ CONFIG_CGROUP_RDMA=yCONFIG_CGROUP_FREEZER=yCONFIG_CGROUP_HUGETLB=yCONFIG_CPUSETS=y+# CONFIG_MEMCG_SWAP was removed in Linux 6.1 — swap accounting is now+# unconditional and folded into MEMCG itself (verified absent in v7.0).CONFIG_MEMCG=y-CONFIG_MEMCG_SWAP=yCONFIG_BLK_CGROUP=yCONFIG_CGROUP_PERF=yCONFIG_CGROUP_BPF=y@@ -164,10 +174,11 @@ CONFIG_BPF_SYSCALL=yCONFIG_BPF_JIT=y# ── ARM64 hardware crypto (AES/SHA via CPU instructions) ─────────────────────+# CRYPTO_SHA2_ARM64_CE and CRYPTO_AES_ARM64_CE were removed in Linux ~6.10–6.13.+# Their accelerated routines moved to lib/crypto and are auto-selected by+# CRYPTO_SHA256 / CRYPTO_AES on capable CPUs (verified absent in v7.0).CONFIG_CRYPTO_SHA256=yCONFIG_CRYPTO_AES=y-CONFIG_CRYPTO_SHA2_ARM64_CE=y-CONFIG_CRYPTO_AES_ARM64_CE=yCONFIG_CRYPTO_GHASH_ARM64_CE=y# ── Disable: display / audio / input (no display in -display none) ───────────