Next Gen STEP AP242 Native-ish BREP Geometric Modeling Kernel
RULED-TOOLING-A0 — InlineStep probe harness
Purpose
tools/Run-RuledStepProbe.ps1 is a tooling only harness for ruled and swept STEP experiments. It does not add Firmament syntax, geometry support, AIR nodes, or production routing.
Current admission requires a closed solid for this production round trip. The
historical ellipse-linear-extrusion-production.step is actually an open surface
with four boundary edges; it remains inspectable and now correctly rejects
canonical solid export. For a closed witness, first build
fixtures/Canonical/Boundary2/closed-ellipse-extrusion.firmament into an ignored
local STEP file, then pass that STEP to the harness. The open probe is retained
as regression evidence rather than edited to disguise its missing closure.
The harness lets a small STEP probe travel through a real Aetheris round trip:
probe STEP
-> aetheris canon --mode production
-> generated Firmament V2 InlineStep wrapper
-> aetheris build
-> canonical AP242 STEP
-> canonical reimport smoke
-> aetheris analyze
-> probe-report.json
Usage
.\tools\Run-RuledStepProbe.ps1 `
-Probe .\testdata\step242\generated\ruled-a2\ellipse-linear-extrusion-production.step `
-Name ellipseLinearExtrusionProduction
Optional parameters:
-Out <directory>selects an output root.-FreeCADinvokestools/Validate-Step-FreeCAD.ps1after Aetheris validation.-Keepretains the intermediate reimport STEP.-Openopens the output directory after completion.
The default output directory is:
artifacts/local/demos/ruled-probes/<probe-name>/
The layout is:
input/
<original probe>
<probe-name>.canonical-input.step
wrapper/
<probe-name>.firm
output/
<probe-name>.canonical.step
probe-report.json
probe-report.json records the real output path, reimport/analyze status, topology summary, selected swept/ruled STEP marker counts, and optional FreeCAD evidence.
Interpretation
Passing the harness proves that the supplied representation survives the current canonical STEP, InlineStep, export, reimport, and analyzer paths. It does not prove that Aetheris can author the same surface from a general Construction AIR node, nor that every degree-1 spline is a valid chamfer surface.