Next Gen STEP AP242 Native-ish BREP Geometric Modeling Kernel
Mold: injection-molding DFM by declaration
Goal
Get a plastic part from first design to tool-ready while the changes are still cheap. The tooling intent a toolmaker would otherwise reconstruct after release (pull direction, parting, side actions, gates, ejectors, cosmetic faces, material) is declared next to the part, and the mechanical checks that follow from it run on every build. Moldflow stays a targeted follow-up on the regions the cheap checks flag, starting from a model whose gates, parting and material are already defined.
What exists
PlasticShell (X0a)
Model { PlasticShell X { ... } } is a first-class domain with the right vocabulary and the right evidence shape, on
one geometry:
| Area | State |
|---|---|
| Exterior | open coaxial frustum only (Exterior: Frustum, radii, height) |
| Intent | Material, ToolingDirection (+Z only), MinimumDraftAngle, Preserve (cosmetic), WallPolicy, one PartingPlane (must sit at the rim), Gate (Point/Edge, must touch the rim), Standoff, EjectorPin, AutoRib |
| Thickness | exact, from the frustum planner's two analytic witnesses |
| Draft | exact cone semi-angle; constant-section ribs and standoffs warn at 0° |
| Pullability | a fixed table: OuterConicalWall cavity, InnerConicalWall core, TopAnnularRim parting |
| Gates | rim contact test; straight-line flow-distance proxy |
| Ejectors | floor containment and planar clearance from standoffs and selected ribs |
| AutoRib | two candidate networks (perimeter, gate fan) scored by the Judgment Engine; materialized as exact constant-wall ribs |
| Evidence | PlasticEvidenceStrength (ExactAnalytic / CertifiedBounded / SampledConservative / GeometricProxy), per-check records, AP242 notes on the faces |
Every check is a closed form over the frustum's parameters, and regions are string names, not faces. None of the analyses carries over to another exterior. What does carry over: the diagnostic vocabulary, the evidence-strength ladder, the rule that ejectors and gates are never silently moved, and the AutoRib judgment pattern.
Around it
- Hollow (
Compose<Hollow>,Extrude<Hollow>,Revolve<Hollow>): general constant-wall bodies with exact wall witnesses. This replaces PlasticShell's frustum as the exterior authority. - Draft: no
Drafton the modern path. Extrude and Compose walls are vertical, so every one of them fails a draft check today.Rib<Rectangular>has its own side draft (conical sides when drafted). This is the biggest geometric gap. - Face references: PMI already resolves
face(-Z),face(op.Top),face(pocket.Floor)and holes by name, and rejects what does not resolve. Mold reuses that resolver. - DFM policy families:
Concept(contract) +Record(data) +Staticdefaults withwithvariants + aTemplate<Policy: ...>exist for CNC, FDM, additive and sheet metal. No molding policy. - Judgment Engine: eligibility-then-utility selection with retained rejections; already used by AutoRib.
The split: policy is a Concept, tooling is a Mold block
The scalar rules (minimum draft, wall range, rib ratio, flow ratio, minimum inside radius, texture draft per depth)
are compile-time requirements. They belong in a Concept InjectionMoldingPolicy with Record/Static data, checked by
Require before geometry, exactly like the sheet-metal and CNC families. A material is a Static:
Static ABS: MoldingPolicySpec, Static PC_GF30 = ABS with { ... }.
The tooling intent cannot be a Concept. It names faces, edges and points of a built part, and every check against it
needs the B-rep. It is a Mold block that refers to the part. That gives:
- one part, several tools (single cavity, family mold, different gate strategy) without touching part geometry;
- the part file stays a product definition; the Mold file is the tooling contract;
- checks run after materialization, on faces, with evidence.
Include "lid.firmament";
Static Lid_ABS = ABS with { MinimumDraft: 1deg }
Mold LidTool {
part: EnclosureLid
policy: Lid_ABS
stage: Concept // Concept | Prototype | Tooling: how hard failures are
pull: +Z // the direction the cavity (A) half opens
parting: Plane { at: face(body.Bottom) }
cosmetic: [face(+Z), face(stock.Side)]
texture: { faces: [face(+Z)]; depth: 0.025mm }
Action LatchCore { pull: -X; faces: [face(latch.Wall)] }
Gate Main { kind: Edge; at: Point3(0mm, 30mm, 0mm) }
Ejectors { zone: face(body.Floor); diameter: 4mm } // or explicit Pin E1 { at: ... }
}
Model<PlasticShell> keeps working until the Mold route reproduces X0a (as Revolve<Hollow> + Mold), then retires
under the convergence rule. AutoRib survives as a Mold-aware interior feature, not as part of the shell domain.
Checks
Each check reports per face (or edge, or point) with an evidence strength. Severity scales with stage: at Concept
everything is a warning except contradictions in the declaration itself; at Tooling every failure is an error and
the build is the release gate.
| Check | Input | Method | Strength |
|---|---|---|---|
| Pull side | pull, parting, actions | every face assigned to exactly one of A, B or an action; by normal against pull and side of the parting | exact on analytic faces; a face whose normals straddle ⟂pull must be split by the parting line |
| Draft | pull, policy, texture | per-face angle to its own pull; plane exact, cylinder/cone from axis and semi-angle, torus/sphere/B-spline over the trimmed normal range | exact / bounded |
| Undercut | pull, actions | face visible from its side along its pull; generator certificates where they exist (a section stack with sections monotone along the pull has none), otherwise ray casting on the tessellation | certified / sampled |
| Parting | parting, classification | parting line is a closed loop of edges or face splits where A meets B; the parting surface leaves no A face below it or B face above it | exact for planar parting |
| Action | action pull | its faces release along its pull, its pull is not blocked by the part, and it does not cross the main parting | certified / sampled |
| Wall | Hollow witness, features | constant wall exact from the Hollow construction; feature junctions as ratios to nominal (the existing thick-section proxy); free-form thickness by inscribed-ball sampling | exact / proxy |
| Sharp inside corners | B-rep edges | concave edges with no blend, against policy minimum inside radius (0.5t typical) | exact |
| Ribs and bosses | feature intent | rib thickness/wall, height/wall, draft, base radius; boss OD/hole, boss wall/nominal, coring; from the feature declarations | exact |
| Ejection | ejectors, classification | each pin on a B face, pin face near-normal to pull, outside cosmetic faces, clear of walls and features by policy distance; total pin area against projected area | exact |
| Gate | gates | on an accessible face for its kind (edge gates on the parting line), not cosmetic | exact |
| Flow length | gates, wall | geodesic distance over the part from the nearest gate to every point, divided by local wall: the L/t ratio against the material limit | sampled |
| Knit lines | gates, holes | where flow fronts from different gates meet, and behind holes the front splits around | sampled |
Not checks, but carried in the report: shrinkage scale for the tool, projected area (clamp tonnage), part volume and shot weight from the material density.
The geodesic flow proxy is the one new algorithm worth care. It runs on the display tessellation's face-adjacency graph, so it is cheap and honest about being sampled. It replaces nothing in Moldflow; it catches parts that will not fill.
What has to be built that is not a check
- Draft on generators.
draft: 1degonExtrude, ComposeBase/Boss/Pocket, and through<Hollow>. Walls become ruled cones and drafted planes about a declared neutral plane (the parting by default). The Hollow table already lists uniform draft as an exact offset (distance t / cos α), so a drafted hollow stays exact. Without this, every Compose part fails its draft check and the feature is decorative. - Interior features on hollow bodies. Ribs and screw bosses grown from the cavity (Hollow phase 5). Manual ribs exist on Box stock only; standoffs exist only in PlasticShell.
- Parting split. A face that straddles the parting (a cylinder with its axis ⟂ pull) has to be split along its silhouette for the B-rep to carry A/B assignment. Planar parting against planes and cylinders first.
Outputs
- Diagnostics in the normal build, per stage.
- A JSON sidecar with every check's per-face evidence, like PlasticShell's.
- Viewport classification: A, B, action, parting line, undercut, draft below policy, cosmetic. For a human this view is most of the value.
- AP242 notes on the faces (pull side, gate, ejector, action), as PlasticShell already writes.
- A Moldflow handoff: gates, material, part STEP. Nothing simulated.
Phases
| Phase | Delivers | Useful alone because |
|---|---|---|
| M0 | InjectionMoldingPolicy family with ABS/PC/PP Statics; Mold block; pull, parting plane, cosmetic; pull-side classification and draft report on any part |
answers "will this pull" for every existing Compose/Hollow/Revolve part, read-only |
| M1 | draft on Extrude/Compose/Hollow |
makes M0's draft check passable |
| M2 | undercut detection, Action, parting split for straddling faces |
side actions declared instead of discovered at the toolmaker |
| M3 | wall/junction, sharp inside corners, rib and boss rules | the classic DFM review |
| M4 | gates, ejectors, flow length, knit lines | tool layout checked |
| M5 | interior ribs and bosses on Hollow; AutoRib on Mold; PlasticShell X0a reproduced and retired | one plastics route |
| M6 | suggestions: ejector layout and gate position by Judgment Engine, parting from silhouette | assist, never silent placement |
M0 needs no new geometry and works on parts that already exist, which is why it goes first.
Decisions for the author
- Mold as a separate block referring to the part (proposed), not
Model<PlasticShell>fields. Same Mold can also sit inside the Model file for a one-off. pullmeans the direction the A (cavity) half opens. B (core) faces release along −pull.- Stage-scaled severity (
Concept/Prototype/Tooling) instead of a strict flag. Mirrors EVT/DVT/PVT: early designs get the full report without failing builds; the tooling stage is the release gate. - Draft as a generator parameter (proposed), exact and consistent with Hollow, rather than a
Modify Draftthat tilts finished faces. A Modify Draft can come later for imported parts. - Parting forms in M0:
Planeonly. Stepped and contoured parting surfaces and parting from silhouette later.
Implementation status
M0 is in (Aetheris.PlasticShell/Mold*.cs, CLI build and validate, docs/public/firmament/mold.md).
- The Mold block is a top-level declaration beside the part's Model. The part builds through the ordinary compiler with the block blanked out, and is read back from its STEP, so the review sees exactly what ships.
- Materials are built-in defaults (ABS, PC, PC_ABS, PP, HDPE, PA66, PA66_GF30, POM, PMMA); a typed
Staticnamed bypolicy:overrides them field by field, andminimumDraft:overrides both. A fullInjectionMoldingPolicyConcept waits for the M3 rules that would use its other fields. - Faces are named geometrically, so the review also works on parts whose construction names are not available:
face(±X|Y|Z)andside(±pull). Construction names (face(body.Floor)) need the PMI resolver; later. - Side and draft are exact on planes and on cylinders and cones about the pull; elsewhere they are the extremes over the face's mesh. Undercuts are traced from up to 64 mesh samples per face against the part's mesh, bucketed on the plane normal to the pull. Rays start three chord tolerances off the surface, because neighbouring faces may chord a shared curved edge differently: with the default 0.05 mm chords, a 12 mm tray corner first reported a 12–88% false undercut from exactly that overlap.
- A face parallel to the pull is assigned to the half it can leave towards, and to the half on its side of the parting plane when both are open. This puts a cup's inner wall with the core and its outer wall with the cavity.
- Draft findings are aggregated into one diagnostic per required angle; a first review of a Compose part otherwise prints one line per vertical wall.
Evidence: a 2° PP cup releases with exact 2.0002° cones and its projected area equals the rim disk to 0.1%; the hollow
tray releases with every wall at 0° (24 warnings at Concept, errors at Tooling) and its projected area equals the
rounded-rectangle outline; a bottle pulled along its axis reports the inside of its shoulder, body and floor as
undercuts and a parting line from 39.4 to 58 mm, off its rim plane; a grooved pulley reports exactly the groove's two
faces and floor.