Skip to content

Next Gen STEP AP242 Native-ish BREP Geometric Modeling Kernel

1.1 KB
Raw Blame
Template < R: Length > Struct Sleeve {
    Circle2 Outside { center: [0mm,0mm] radius: R }
    Circle2 Inside { center: [0mm,0mm] radius: 15mm }
    Profile Section { Loop Outer { Outside |> TraceLoop } Loop Inner { Inside as InnerBoundary |> TraceLoop } }
    Extrude Body { profile: Section from: -10mm to: 10mm }
}
Assembly FixedNested {
 <Assembly FixedNested>
  <Part Base = Sleeve<R: 20mm>>
   Placement { from: Origin; to: Parent; }
  </Part>
  <Assembly Module>
   Placement { from: Origin; to: Parent; translateLocal: [40mm, 10mm, 3mm]; rotateLocal: { axis: Z; angle: 45deg; }; }
   <Part First = Sleeve<R: 20mm>>
    Placement { from: Origin; to: Parent; }
    Semantic Mount { DatumFrame Frame = [0,0,0] x [1,0,0] y [0,1,0] z [0,0,1]; }
    Semantic Output { DatumFrame Frame = [60,0,0] x [1,0,0] y [0,1,0] z [0,0,1]; }
   </Part>
   <Part Second = Sleeve<R: 20mm>>
    Semantic Mount { DatumFrame Frame = [0,0,0] x [1,0,0] y [0,1,0] z [0,0,1]; }
   </Part>
  </Assembly>
 </Assembly>
 anchor: FixedNested;
 Interface<Fixed> Seat { a: FixedNested.Module.First.Output; b: FixedNested.Module.Second.Mount; }
}