Skip to content

Next Gen STEP AP242 Native-ish BREP Geometric Modeling Kernel

FL2b: rerun targeted G1-affected friction cases

Yuechen Li15a09ea5a64d
diff --git a/Aetheris.Firmament.FrictionLab/Cases/blind-hole-mount-block/review.toon b/Aetheris.Firmament.FrictionLab/Cases/blind-hole-mount-block/review.toon
index b739f7bc..36f0c48d 100644
--- a/Aetheris.Firmament.FrictionLab/Cases/blind-hole-mount-block/review.toon
+++ b/Aetheris.Firmament.FrictionLab/Cases/blind-hole-mount-block/review.toon
@@ -6,9 +6,11 @@ pain_points[2]:
- "Author intent is clear, but permissible blind-hole envelope is narrow and opaque."
proposed_features[1]:
- "Broaden subtract span-family support and expose explicit blind-hole capability constraints."
-reviewer_verdict: "Stopped intentionally; friction captured for future feature pressure."
+reviewer_verdict: "No material change from FL2a; the blind-hole span-family limiter remains the active blocker after G1."
previous_status: partial
current_status: partial
changed: no
-blocker_class: unchanged_kernel_blocker
-blocker_remaining: "Blind-hole subtract still violates supported subtract span-family envelope."
+improved: false
+classification: unchanged_kernel_blocker
+if_changed_why: "n/a"
+if_unchanged_blocker: "Boolean feature 'blind_hole' (subtract) does not match the supported subtract span family; only through-holes or one-sided blind holes are allowed in this milestone."
diff --git a/Aetheris.Firmament.FrictionLab/Cases/counterbore-hole/review.toon b/Aetheris.Firmament.FrictionLab/Cases/counterbore-hole/review.toon
index 829b804c..52ab0aa6 100644
--- a/Aetheris.Firmament.FrictionLab/Cases/counterbore-hole/review.toon
+++ b/Aetheris.Firmament.FrictionLab/Cases/counterbore-hole/review.toon
@@ -7,9 +7,11 @@ pain_points[2]:
proposed_features[2]:
- "Native hole feature supporting counterbore/countersink parameters."
- "Axis-reuse reference between sequential subtract tools."
-reviewer_verdict: "Intent is representable but awkward and sensitive to subtract constraints."
+reviewer_verdict: "No material change from FL2a; stepped subtract/counterbore composition is still blocked by subtract span-family limits at the pocket stage."
previous_status: partial
current_status: partial
changed: no
-blocker_class: unchanged_kernel_blocker
-blocker_remaining: "Counterbore pocket stage is still outside the supported subtract span family."
+improved: false
+classification: unchanged_kernel_blocker
+if_changed_why: "n/a"
+if_unchanged_blocker: "Boolean feature 'counterbore_pocket' (subtract) does not match the supported subtract span family; only through-holes or one-sided blind holes are allowed in this milestone."
diff --git a/Aetheris.Firmament.FrictionLab/Cases/flange-bolt-circle/review.toon b/Aetheris.Firmament.FrictionLab/Cases/flange-bolt-circle/review.toon
index 0a7ee14a..04e56872 100644
--- a/Aetheris.Firmament.FrictionLab/Cases/flange-bolt-circle/review.toon
+++ b/Aetheris.Firmament.FrictionLab/Cases/flange-bolt-circle/review.toon
@@ -7,9 +7,11 @@ pain_points[2]:
proposed_features[2]:
- "Polar pattern operation for repeated cuts around an axis."
- "Parameter blocks for shared hole dimensions."
-reviewer_verdict: "Possible today, but repetitive and error-prone for larger bolt counts."
+reviewer_verdict: "Rerun confirms geometry-first validation no longer blocks entry; execution still fails on overlapping hole-chain interference."
previous_status: failure
current_status: failure
-changed: yes
-blocker_class: improved_but_still_blocked
-change_note: "F2/F3 removed the old cylinder-root entry blocker; now blocked later by hole-interference/coaxial subtract constraints."
+changed: no
+improved: false
+classification: unchanged_kernel_blocker
+if_changed_why: "n/a"
+if_unchanged_blocker: "Boolean feature 'bolt_0' (subtract) overlaps previously accepted hole; overlapping cylinder-root hole chains are not supported."
diff --git a/Aetheris.Firmament.FrictionLab/Reports/fl2b-run.json b/Aetheris.Firmament.FrictionLab/Reports/fl2b-run.json
new file mode 100644
index 00000000..b737e2ec
--- /dev/null
+++ b/Aetheris.Firmament.FrictionLab/Reports/fl2b-run.json
@@ -0,0 +1,75 @@
+{
+ "totalCases": 3,
+ "successCount": 0,
+ "partialCount": 2,
+ "failureCount": 1,
+ "caseResults": [
+ {
+ "caseId": "flange-bolt-circle",
+ "buildStatus": "failure",
+ "artifactPresent": false,
+ "stepArtifactPath": null,
+ "possible": "true",
+ "awkwardness": "medium",
+ "diagnostics": [
+ {
+ "code": "NotImplemented",
+ "severity": "Error",
+ "message": "Requested boolean feature \u0027bolt_0\u0027 (subtract) could not be executed.",
+ "source": "firmament"
+ },
+ {
+ "code": "NotImplemented",
+ "severity": "Error",
+ "message": "Boolean feature \u0027bolt_0\u0027 (subtract) overlaps previously accepted hole \u003Cunknown\u003E; overlapping cylinder-root hole chains are not supported.",
+ "source": "BrepBoolean.AnalyticHole.HoleInterference"
+ }
+ ]
+ },
+ {
+ "caseId": "blind-hole-mount-block",
+ "buildStatus": "partial",
+ "artifactPresent": false,
+ "stepArtifactPath": null,
+ "possible": "partial",
+ "awkwardness": "medium",
+ "diagnostics": [
+ {
+ "code": "NotImplemented",
+ "severity": "Error",
+ "message": "Requested boolean feature \u0027blind_hole\u0027 (subtract) could not be executed.",
+ "source": "firmament"
+ },
+ {
+ "code": "NotImplemented",
+ "severity": "Error",
+ "message": "Boolean feature \u0027blind_hole\u0027 (subtract) does not match the supported subtract span family; only through-holes or one-sided blind holes are allowed in this milestone.",
+ "source": "BrepBoolean.AnalyticHole.NotFullySpanning"
+ }
+ ]
+ },
+ {
+ "caseId": "counterbore-hole",
+ "buildStatus": "partial",
+ "artifactPresent": false,
+ "stepArtifactPath": null,
+ "possible": "partial",
+ "awkwardness": "high",
+ "diagnostics": [
+ {
+ "code": "NotImplemented",
+ "severity": "Error",
+ "message": "Requested boolean feature \u0027counterbore_pocket\u0027 (subtract) could not be executed.",
+ "source": "firmament"
+ },
+ {
+ "code": "NotImplemented",
+ "severity": "Error",
+ "message": "Boolean feature \u0027counterbore_pocket\u0027 (subtract) does not match the supported subtract span family; only through-holes or one-sided blind holes are allowed in this milestone.",
+ "source": "BrepBoolean.AnalyticHole.NotFullySpanning"
+ }
+ ]
+ }
+ ],
+ "summaryPath": "Aetheris.Firmament.FrictionLab/Reports/fl2b-run.json"
+}
\ No newline at end of file
diff --git a/Aetheris.Firmament.FrictionLab/Reports/fl2b-summary.json b/Aetheris.Firmament.FrictionLab/Reports/fl2b-summary.json
new file mode 100644
index 00000000..1d0ae16a
--- /dev/null
+++ b/Aetheris.Firmament.FrictionLab/Reports/fl2b-summary.json
@@ -0,0 +1,64 @@
+{
+ "milestone": "FL2b",
+ "description": "Targeted friction reassessment for G1 geometry-first subtract validation impact.",
+ "rerun_case_count": 3,
+ "source_previous_summary": "Aetheris.Firmament.FrictionLab/Reports/fl2a-summary.json",
+ "source_current_run": "Aetheris.Firmament.FrictionLab/Reports/fl2b-run.json",
+ "cases": [
+ {
+ "case_id": "flange-bolt-circle",
+ "previous_status": "failure",
+ "current_status": "failure",
+ "changed": "no",
+ "improved": false,
+ "classification": "unchanged_kernel_blocker",
+ "artifact_present": false,
+ "step_artifact_path": null,
+ "possible": "true",
+ "awkwardness": "medium",
+ "remaining_blocker": "Boolean feature 'bolt_0' (subtract) overlaps previously accepted hole; overlapping cylinder-root hole chains are not supported."
+ },
+ {
+ "case_id": "blind-hole-mount-block",
+ "previous_status": "partial",
+ "current_status": "partial",
+ "changed": "no",
+ "improved": false,
+ "classification": "unchanged_kernel_blocker",
+ "artifact_present": false,
+ "step_artifact_path": null,
+ "possible": "partial",
+ "awkwardness": "medium",
+ "remaining_blocker": "Boolean feature 'blind_hole' (subtract) does not match the supported subtract span family; only through-holes or one-sided blind holes are allowed in this milestone."
+ },
+ {
+ "case_id": "counterbore-hole",
+ "previous_status": "partial",
+ "current_status": "partial",
+ "changed": "no",
+ "improved": false,
+ "classification": "unchanged_kernel_blocker",
+ "artifact_present": false,
+ "step_artifact_path": null,
+ "possible": "partial",
+ "awkwardness": "high",
+ "remaining_blocker": "Boolean feature 'counterbore_pocket' (subtract) does not match the supported subtract span family; only through-holes or one-sided blind holes are allowed in this milestone."
+ }
+ ],
+ "improved_cases": [],
+ "top_repeated_remaining_blockers": [
+ {
+ "blocker": "BrepBoolean.AnalyticHole.NotFullySpanning",
+ "count": 2
+ },
+ {
+ "blocker": "BrepBoolean.AnalyticHole.HoleInterference",
+ "count": 1
+ }
+ ],
+ "deterministic_case_order": [
+ "flange-bolt-circle",
+ "blind-hole-mount-block",
+ "counterbore-hole"
+ ]
+}