Next Gen STEP AP242 Native-ish BREP Geometric Modeling Kernel
Run FL2e targeted friction reassessment after G2
Yuechen Li25d002dda126
diff --git a/Aetheris.Firmament.FrictionLab/Cases/mounting-bracket-basic/review.toon b/Aetheris.Firmament.FrictionLab/Cases/mounting-bracket-basic/review.toonindex ee59bdeb..3a9736f3 100644--- a/Aetheris.Firmament.FrictionLab/Cases/mounting-bracket-basic/review.toon+++ b/Aetheris.Firmament.FrictionLab/Cases/mounting-bracket-basic/review.toon@@ -2,14 +2,16 @@ case_id: mounting-bracket-basicpossible: partialawkwardness: highpain_points[2]:- - "Bracket union requires add behavior that currently fails on non-trivial unions."- - "Hole placement requires manual offsets with no alignment helper for faces/axes."+ - "Bracket add root is still not recognized as a bounded orthogonal safe subtract root for follow-on subtract features."+ - "Hole placement remains manual offset authoring with no semantic alignment helpers."proposed_features[2]:- - "Robust add/union support for simple multi-box bracket construction."+ - "Broaden bounded additive-root recognition so valid bracket add/union results can re-enter safe subtract composition."- "Face/axis placement primitives for hole positioning."-reviewer_verdict: "Intent is clear but blocked by union limitations, so only partial authoring confidence."+reviewer_verdict: "FL2e rerun is unchanged from FL2a: subtract continuation after bracket add still fails root recognition."previous_status: partialcurrent_status: partial-changed: yes-blocker_class: improved_but_still_blocked-change_note: "F1 union now gets the bracket add farther; blocker moved to subtract-family composition from the new bracket root."+changed: no+improved: false+classification: unchanged_kernel_blocker+blocker_remaining: "Boolean feature 'base_hole' (subtract) cannot continue from 'bracket' because that prior add result is not a recognized bounded orthogonal safe subtract root."+comparison_to_fl2a: "No status change relative to FL2a; G2 did not unlock this case's subtract continuation path."diff --git a/Aetheris.Firmament.FrictionLab/Cases/shaft-keyway/review.toon b/Aetheris.Firmament.FrictionLab/Cases/shaft-keyway/review.toonindex a875bb78..7e35d1b5 100644--- a/Aetheris.Firmament.FrictionLab/Cases/shaft-keyway/review.toon+++ b/Aetheris.Firmament.FrictionLab/Cases/shaft-keyway/review.toon@@ -2,14 +2,16 @@ case_id: shaft-keywaypossible: trueawkwardness: mediumpain_points[2]:- - "Slot alignment to cylinder is offset-based instead of axis/face constrained."- - "No dedicated keyway helper, so dimensions are manually coordinated."+ - "Keyway subtract is still outside the supported sequential safe subtract family on bounded cylinder roots."+ - "Alignment intent remains offset-driven with no dedicated shaft/keyway semantic helper."proposed_features[2]:- - "Axis-aligned slot primitive for shafts."+ - "Extend subtract family recognition for bounded cylinder-root slot/keyway geometry."- "Reference constraints against cylindrical faces/axes."-reviewer_verdict: "Possible with existing primitives, but alignment readability is weaker than desired."+reviewer_verdict: "FL2e rerun is unchanged from FL2a: keyway subtract remains unsupported by current safe composition rules."previous_status: failurecurrent_status: failurechanged: no-blocker_class: unchanged_kernel_blocker-blocker_remaining: "Shaft keyway subtract remains outside safe subtract composition support for bounded cylinder roots."+improved: false+classification: unchanged_kernel_blocker+blocker_remaining: "Boolean feature 'keyway' (subtract): Boolean Subtract: sequential safe composition only supports subtracting supported analytic holes from the current bounded safe root family."+comparison_to_fl2a: "No status change relative to FL2a; G2 does not materially improve this shaft/keyway case."diff --git a/Aetheris.Firmament.FrictionLab/Cases/simple-bracket/review.toon b/Aetheris.Firmament.FrictionLab/Cases/simple-bracket/review.toonindex e0e4ec21..60880a6f 100644--- a/Aetheris.Firmament.FrictionLab/Cases/simple-bracket/review.toon+++ b/Aetheris.Firmament.FrictionLab/Cases/simple-bracket/review.toon@@ -2,13 +2,15 @@ case_id: simple-bracketpossible: partialawkwardness: highpain_points[2]:- - "Additive union of offset boxes fails for non-single-box unions in current milestone."- - "Clean bracket intent cannot be expressed without unsupported boolean union behavior."+ - "Second bracket add still hits M13 union rebuild constraints for non-single-box recognized roots."+ - "Bracket intent is straightforward but expression remains blocked by limited add/union representability."proposed_features[1]:- - "Expand boolean add execution beyond single-box union rebuild constraints."-reviewer_verdict: "Stopped intentionally; recorded friction instead of forcing workaround geometry."+ - "Expand boolean add execution beyond single recognized axis-aligned box rebuild constraints."+reviewer_verdict: "FL2e rerun remains blocked at the same second-add union step seen in FL2a."previous_status: partialcurrent_status: partialchanged: no-blocker_class: unchanged_kernel_blocker-blocker_remaining: "Second additive union step still fails rebuild constraints for multi-box bracket completion."+improved: false+classification: unchanged_kernel_blocker+blocker_remaining: "Boolean feature 'bracket' (add): Boolean Union: M13 only supports recognized axis-aligned boxes from BrepPrimitives.CreateBox(...)."+comparison_to_fl2a: "No change versus FL2a; G2 does not affect this add/union blocker path."diff --git a/Aetheris.Firmament.FrictionLab/Reports/fl2e-run.json b/Aetheris.Firmament.FrictionLab/Reports/fl2e-run.jsonnew file mode 100644index 00000000..a37769bf--- /dev/null+++ b/Aetheris.Firmament.FrictionLab/Reports/fl2e-run.json@@ -0,0 +1,75 @@+{+ "totalCases": 3,+ "successCount": 0,+ "partialCount": 2,+ "failureCount": 1,+ "caseResults": [+ {+ "caseId": "mounting-bracket-basic",+ "buildStatus": "partial",+ "artifactPresent": false,+ "stepArtifactPath": null,+ "possible": "partial",+ "awkwardness": "high",+ "diagnostics": [+ {+ "code": "NotImplemented",+ "severity": "Error",+ "message": "Requested boolean feature \u0027base_hole\u0027 (subtract) could not be executed.",+ "source": "firmament"+ },+ {+ "code": "ValidationFailed",+ "severity": "Error",+ "message": "Boolean feature \u0027base_hole\u0027 (subtract) cannot continue from \u0027bracket\u0027 because that prior add result is not a recognized bounded orthogonal safe subtract root.",+ "source": "firmament.feature-graph.unrecognized-additive-root"+ }+ ]+ },+ {+ "caseId": "simple-bracket",+ "buildStatus": "partial",+ "artifactPresent": false,+ "stepArtifactPath": null,+ "possible": "partial",+ "awkwardness": "high",+ "diagnostics": [+ {+ "code": "NotImplemented",+ "severity": "Error",+ "message": "Requested boolean feature \u0027bracket\u0027 (add) could not be executed.",+ "source": "firmament"+ },+ {+ "code": "NotImplemented",+ "severity": "Error",+ "message": "Boolean feature \u0027bracket\u0027 (add): Boolean Union: M13 only supports recognized axis-aligned boxes from BrepPrimitives.CreateBox(...).",+ "source": "BrepBoolean.RebuildResult"+ }+ ]+ },+ {+ "caseId": "shaft-keyway",+ "buildStatus": "failure",+ "artifactPresent": false,+ "stepArtifactPath": null,+ "possible": "true",+ "awkwardness": "medium",+ "diagnostics": [+ {+ "code": "NotImplemented",+ "severity": "Error",+ "message": "Requested boolean feature \u0027keyway\u0027 (subtract) could not be executed.",+ "source": "firmament"+ },+ {+ "code": "NotImplemented",+ "severity": "Error",+ "message": "Boolean feature \u0027keyway\u0027 (subtract): Boolean Subtract: sequential safe composition only supports subtracting supported analytic holes from the current bounded safe root family.",+ "source": "BrepBoolean.RebuildResult"+ }+ ]+ }+ ],+ "summaryPath": "Aetheris.Firmament.FrictionLab/Reports/fl2e-run.json"+}\ No newline at end of filediff --git a/Aetheris.Firmament.FrictionLab/Reports/fl2e-summary.json b/Aetheris.Firmament.FrictionLab/Reports/fl2e-summary.jsonnew file mode 100644index 00000000..d7da5efc--- /dev/null+++ b/Aetheris.Firmament.FrictionLab/Reports/fl2e-summary.json@@ -0,0 +1,70 @@+{+ "milestone": "FL2e",+ "description": "Targeted friction reassessment rerun for continued-root and bracket-style blocker cases after G2.",+ "rerun_case_count": 3,+ "source_previous_summary": "Aetheris.Firmament.FrictionLab/Reports/fl2a-summary.json",+ "source_current_run": "Aetheris.Firmament.FrictionLab/Reports/fl2e-run.json",+ "cases": [+ {+ "case_id": "mounting-bracket-basic",+ "previous_status": "partial",+ "current_status": "partial",+ "changed": "no",+ "improved": false,+ "classification": "unchanged_kernel_blocker",+ "artifact_present": false,+ "step_artifact_path": null,+ "possible": "partial",+ "awkwardness": "high",+ "remaining_blocker": "Boolean feature 'base_hole' (subtract) cannot continue from 'bracket' because that prior add result is not a recognized bounded orthogonal safe subtract root."+ },+ {+ "case_id": "simple-bracket",+ "previous_status": "partial",+ "current_status": "partial",+ "changed": "no",+ "improved": false,+ "classification": "unchanged_kernel_blocker",+ "artifact_present": false,+ "step_artifact_path": null,+ "possible": "partial",+ "awkwardness": "high",+ "remaining_blocker": "Boolean feature 'bracket' (add): Boolean Union: M13 only supports recognized axis-aligned boxes from BrepPrimitives.CreateBox(...)."+ },+ {+ "case_id": "shaft-keyway",+ "previous_status": "failure",+ "current_status": "failure",+ "changed": "no",+ "improved": false,+ "classification": "unchanged_kernel_blocker",+ "artifact_present": false,+ "step_artifact_path": null,+ "possible": "true",+ "awkwardness": "medium",+ "remaining_blocker": "Boolean feature 'keyway' (subtract): Boolean Subtract: sequential safe composition only supports subtracting supported analytic holes from the current bounded safe root family."+ }+ ],+ "improved_cases": [],+ "top_repeated_remaining_blockers": [+ {+ "blocker": "BrepBoolean.RebuildResult",+ "count": 2+ },+ {+ "blocker": "firmament.feature-graph.unrecognized-additive-root",+ "count": 1+ }+ ],+ "top_repeated_remaining_blocker_classes": [+ {+ "classification": "unchanged_kernel_blocker",+ "count": 3+ }+ ],+ "deterministic_case_order": [+ "mounting-bracket-basic",+ "simple-bracket",+ "shaft-keyway"+ ]+}