Skip to content

Next Gen STEP AP242 Native-ish BREP Geometric Modeling Kernel

Bootstrap Firmament FrictionLab harness project

Yuechen Li923cdb7366a8
diff --git a/Aetheris.Firmament.FrictionLab/Aetheris.Firmament.FrictionLab.csproj b/Aetheris.Firmament.FrictionLab/Aetheris.Firmament.FrictionLab.csproj
new file mode 100644
index 00000000..a02fee58
--- /dev/null
+++ b/Aetheris.Firmament.FrictionLab/Aetheris.Firmament.FrictionLab.csproj
@@ -0,0 +1,12 @@
+<Project Sdk="Microsoft.NET.Sdk">
+ <PropertyGroup>
+ <OutputType>Exe</OutputType>
+ <TargetFramework>net8.0</TargetFramework>
+ <ImplicitUsings>enable</ImplicitUsings>
+ <Nullable>enable</Nullable>
+ </PropertyGroup>
+
+ <ItemGroup>
+ <ProjectReference Include="..\Aetheris.Kernel.Firmament\Aetheris.Kernel.Firmament.csproj" />
+ </ItemGroup>
+</Project>
diff --git a/Aetheris.Firmament.FrictionLab/Cases/blind-hole-mount-block/expected.intent.md b/Aetheris.Firmament.FrictionLab/Cases/blind-hole-mount-block/expected.intent.md
new file mode 100644
index 00000000..4926c05c
--- /dev/null
+++ b/Aetheris.Firmament.FrictionLab/Cases/blind-hole-mount-block/expected.intent.md
@@ -0,0 +1,4 @@
+# Expected intent
+
+- Create a rectangular block.
+- Subtract a cylinder that does not fully pass through the block.
diff --git a/Aetheris.Firmament.FrictionLab/Cases/blind-hole-mount-block/part.firmament b/Aetheris.Firmament.FrictionLab/Cases/blind-hole-mount-block/part.firmament
new file mode 100644
index 00000000..5ab27f75
--- /dev/null
+++ b/Aetheris.Firmament.FrictionLab/Cases/blind-hole-mount-block/part.firmament
@@ -0,0 +1,30 @@
+firmament:
+ version: 1
+
+model:
+ name: friction_blind_hole_mount_block
+ units: mm
+
+ops[2]:
+ -
+ op: box
+ id: base
+ size[3]:
+ 50
+ 40
+ 20
+
+ -
+ op: subtract
+ id: blind_hole
+ from: base
+ with:
+ op: cylinder
+ radius: 5
+ height: 10
+ place:
+ on: origin
+ offset[3]:
+ 0
+ 0
+ 5
diff --git a/Aetheris.Firmament.FrictionLab/Cases/blind-hole-mount-block/prompt.md b/Aetheris.Firmament.FrictionLab/Cases/blind-hole-mount-block/prompt.md
new file mode 100644
index 00000000..347176e9
--- /dev/null
+++ b/Aetheris.Firmament.FrictionLab/Cases/blind-hole-mount-block/prompt.md
@@ -0,0 +1,3 @@
+# Prompt
+
+Author a mounting block with a single blind hole centered on the top face.
diff --git a/Aetheris.Firmament.FrictionLab/Cases/blind-hole-mount-block/review.toon b/Aetheris.Firmament.FrictionLab/Cases/blind-hole-mount-block/review.toon
new file mode 100644
index 00000000..b17d5e7f
--- /dev/null
+++ b/Aetheris.Firmament.FrictionLab/Cases/blind-hole-mount-block/review.toon
@@ -0,0 +1,9 @@
+case_id: blind-hole-mount-block
+possible: partial
+awkwardness: medium
+pain_points[2]:
+ - "Blind-hole subtract case is rejected by current subtract span-family constraints."
+ - "Author intent is clear, but permissible blind-hole envelope is narrow and opaque."
+proposed_features[1]:
+ - "Broaden subtract span-family support and expose explicit blind-hole capability constraints."
+reviewer_verdict: "Stopped intentionally; friction captured for future feature pressure."
diff --git a/Aetheris.Firmament.FrictionLab/Cases/flange-plate-hole-pattern/expected.intent.md b/Aetheris.Firmament.FrictionLab/Cases/flange-plate-hole-pattern/expected.intent.md
new file mode 100644
index 00000000..d9ba8cff
--- /dev/null
+++ b/Aetheris.Firmament.FrictionLab/Cases/flange-plate-hole-pattern/expected.intent.md
@@ -0,0 +1,4 @@
+# Expected intent
+
+- Build a rectangular flange plate.
+- Subtract two cylindrical through-holes with spacing along X.
diff --git a/Aetheris.Firmament.FrictionLab/Cases/flange-plate-hole-pattern/part.firmament b/Aetheris.Firmament.FrictionLab/Cases/flange-plate-hole-pattern/part.firmament
new file mode 100644
index 00000000..535f0934
--- /dev/null
+++ b/Aetheris.Firmament.FrictionLab/Cases/flange-plate-hole-pattern/part.firmament
@@ -0,0 +1,45 @@
+firmament:
+ version: 1
+
+model:
+ name: friction_flange_plate_hole_pattern
+ units: mm
+
+ops[3]:
+ -
+ op: box
+ id: plate
+ size[3]:
+ 80
+ 40
+ 8
+
+ -
+ op: subtract
+ id: hole_left
+ from: plate
+ with:
+ op: cylinder
+ radius: 4
+ height: 20
+ place:
+ on: origin
+ offset[3]:
+ -20
+ 0
+ 0
+
+ -
+ op: subtract
+ id: hole_right
+ from: hole_left
+ with:
+ op: cylinder
+ radius: 4
+ height: 20
+ place:
+ on: origin
+ offset[3]:
+ 20
+ 0
+ 0
diff --git a/Aetheris.Firmament.FrictionLab/Cases/flange-plate-hole-pattern/prompt.md b/Aetheris.Firmament.FrictionLab/Cases/flange-plate-hole-pattern/prompt.md
new file mode 100644
index 00000000..d1e7ab93
--- /dev/null
+++ b/Aetheris.Firmament.FrictionLab/Cases/flange-plate-hole-pattern/prompt.md
@@ -0,0 +1,3 @@
+# Prompt
+
+Author a flange-like plate with two mounting holes in a simple horizontal pattern.
diff --git a/Aetheris.Firmament.FrictionLab/Cases/flange-plate-hole-pattern/review.toon b/Aetheris.Firmament.FrictionLab/Cases/flange-plate-hole-pattern/review.toon
new file mode 100644
index 00000000..36dd01da
--- /dev/null
+++ b/Aetheris.Firmament.FrictionLab/Cases/flange-plate-hole-pattern/review.toon
@@ -0,0 +1,8 @@
+case_id: flange-plate-hole-pattern
+possible: true
+awkwardness: low
+pain_points[1]:
+ - "Hole arrays require repeated manual feature chaining."
+proposed_features[1]:
+ - "Pattern helper for repeated boolean tools with spacing controls."
+reviewer_verdict: "Expressible and useful as a repeatable starter case."
diff --git a/Aetheris.Firmament.FrictionLab/Cases/simple-bracket/expected.intent.md b/Aetheris.Firmament.FrictionLab/Cases/simple-bracket/expected.intent.md
new file mode 100644
index 00000000..8e00e3f0
--- /dev/null
+++ b/Aetheris.Firmament.FrictionLab/Cases/simple-bracket/expected.intent.md
@@ -0,0 +1,4 @@
+# Expected intent
+
+- Build a compact L-style bracket approximation using additive boolean composition.
+- Keep geometry intentionally simple for baseline harness validation.
diff --git a/Aetheris.Firmament.FrictionLab/Cases/simple-bracket/part.firmament b/Aetheris.Firmament.FrictionLab/Cases/simple-bracket/part.firmament
new file mode 100644
index 00000000..1dc6dc8e
--- /dev/null
+++ b/Aetheris.Firmament.FrictionLab/Cases/simple-bracket/part.firmament
@@ -0,0 +1,49 @@
+firmament:
+ version: 1
+
+model:
+ name: friction_simple_bracket
+ units: mm
+
+ops[3]:
+ -
+ op: box
+ id: base
+ size[3]:
+ 40
+ 10
+ 6
+
+ -
+ op: add
+ id: upright_seed
+ to: base
+ with:
+ op: box
+ size[3]:
+ 8
+ 10
+ 24
+ place:
+ on: origin
+ offset[3]:
+ 16
+ 0
+ 9
+
+ -
+ op: add
+ id: bracket
+ to: upright_seed
+ with:
+ op: box
+ size[3]:
+ 8
+ 10
+ 12
+ place:
+ on: origin
+ offset[3]:
+ -16
+ 0
+ 9
diff --git a/Aetheris.Firmament.FrictionLab/Cases/simple-bracket/prompt.md b/Aetheris.Firmament.FrictionLab/Cases/simple-bracket/prompt.md
new file mode 100644
index 00000000..df3200af
--- /dev/null
+++ b/Aetheris.Firmament.FrictionLab/Cases/simple-bracket/prompt.md
@@ -0,0 +1,3 @@
+# Prompt
+
+Author a small bracket-like body by joining a base block and an upright block.
diff --git a/Aetheris.Firmament.FrictionLab/Cases/simple-bracket/review.toon b/Aetheris.Firmament.FrictionLab/Cases/simple-bracket/review.toon
new file mode 100644
index 00000000..a1605965
--- /dev/null
+++ b/Aetheris.Firmament.FrictionLab/Cases/simple-bracket/review.toon
@@ -0,0 +1,9 @@
+case_id: simple-bracket
+possible: partial
+awkwardness: high
+pain_points[2]:
+ - "Additive union of offset boxes fails for non-single-box unions in current milestone."
+ - "Clean bracket intent cannot be expressed without unsupported boolean union behavior."
+proposed_features[1]:
+ - "Expand boolean add execution beyond single-box union rebuild constraints."
+reviewer_verdict: "Stopped intentionally; recorded friction instead of forcing workaround geometry."
diff --git a/Aetheris.Firmament.FrictionLab/Harness/FrictionLabRunner.cs b/Aetheris.Firmament.FrictionLab/Harness/FrictionLabRunner.cs
new file mode 100644
index 00000000..95593a71
--- /dev/null
+++ b/Aetheris.Firmament.FrictionLab/Harness/FrictionLabRunner.cs
@@ -0,0 +1,130 @@
+using System.Text;
+using System.Text.Json;
+using Aetheris.Kernel.Core.Diagnostics;
+using Aetheris.Kernel.Firmament;
+
+namespace Aetheris.Firmament.FrictionLab.Harness;
+
+internal sealed class FrictionLabRunner
+{
+ private static readonly JsonSerializerOptions JsonOptions = new(JsonSerializerDefaults.Web)
+ {
+ WriteIndented = true
+ };
+
+ public FrictionLabSummary Run()
+ {
+ var paths = FrictionLabPaths.Resolve();
+ Directory.CreateDirectory(paths.ReportsDirectory);
+ Directory.CreateDirectory(paths.ArtifactsDirectory);
+
+ var caseResults = DiscoverCaseDirectories(paths.CasesDirectory)
+ .Select(caseDirectory => RunCase(paths, caseDirectory))
+ .ToArray();
+
+ var summaryPath = Path.Combine(paths.ReportsDirectory, "summary.json");
+ var summary = FrictionLabSummary.FromResults(caseResults, ToRepoRelativePath(paths.RepoRoot, summaryPath));
+ File.WriteAllText(summaryPath, JsonSerializer.Serialize(summary, JsonOptions), new UTF8Encoding(false));
+
+ return summary;
+ }
+
+ private static IEnumerable<string> DiscoverCaseDirectories(string casesDirectory)
+ {
+ if (!Directory.Exists(casesDirectory))
+ {
+ return [];
+ }
+
+ return Directory.GetDirectories(casesDirectory)
+ .OrderBy(path => path, StringComparer.Ordinal);
+ }
+
+ private static FrictionCaseResult RunCase(FrictionLabPaths paths, string caseDirectory)
+ {
+ var caseId = Path.GetFileName(caseDirectory);
+ var sourcePath = Path.Combine(caseDirectory, "part.firmament");
+ if (!File.Exists(sourcePath))
+ {
+ return new FrictionCaseResult(
+ caseId,
+ "failure",
+ null,
+ [new FrictionDiagnostic("ValidationFailed", "Error", "Case is missing required file 'part.firmament'.", "friction-lab")]);
+ }
+
+ var sourceText = NormalizeLf(File.ReadAllText(sourcePath, Encoding.UTF8));
+ var exportResult = FirmamentStepExporter.Export(new FirmamentCompileRequest(new FirmamentSourceDocument(sourceText)));
+
+ var artifactPath = Path.Combine(paths.ArtifactsDirectory, caseId + ".step");
+ if (File.Exists(artifactPath))
+ {
+ File.Delete(artifactPath);
+ }
+
+ if (!exportResult.IsSuccess)
+ {
+ return new FrictionCaseResult(
+ caseId,
+ "failure",
+ null,
+ exportResult.Diagnostics.Select(MapDiagnostic).ToArray());
+ }
+
+ File.WriteAllText(artifactPath, exportResult.Value.StepText, new UTF8Encoding(false));
+ var status = exportResult.Diagnostics.Any(d => d.Severity != KernelDiagnosticSeverity.Info)
+ ? "partial"
+ : "success";
+
+ return new FrictionCaseResult(
+ caseId,
+ status,
+ ToRepoRelativePath(paths.RepoRoot, artifactPath),
+ exportResult.Diagnostics.Select(MapDiagnostic).ToArray());
+ }
+
+ private static FrictionDiagnostic MapDiagnostic(KernelDiagnostic diagnostic) =>
+ new(
+ diagnostic.Code.ToString(),
+ diagnostic.Severity.ToString(),
+ diagnostic.Message,
+ diagnostic.Source);
+
+ private static string NormalizeLf(string value) =>
+ value.Replace("\r\n", "\n", StringComparison.Ordinal).Replace("\r", "\n", StringComparison.Ordinal);
+
+ private static string ToRepoRelativePath(string repoRoot, string fullPath) =>
+ Path.GetRelativePath(repoRoot, fullPath).Replace(Path.DirectorySeparatorChar, '/');
+}
+
+internal sealed record FrictionLabPaths(string RepoRoot, string ProjectRoot, string CasesDirectory, string ReportsDirectory, string ArtifactsDirectory)
+{
+ public static FrictionLabPaths Resolve()
+ {
+ var repoRoot = FindRepoRoot();
+ var projectRoot = Path.Combine(repoRoot, "Aetheris.Firmament.FrictionLab");
+
+ return new FrictionLabPaths(
+ repoRoot,
+ projectRoot,
+ Path.Combine(projectRoot, "Cases"),
+ Path.Combine(projectRoot, "Reports"),
+ Path.Combine(projectRoot, "Reports", "Artifacts"));
+ }
+
+ private static string FindRepoRoot()
+ {
+ var directory = new DirectoryInfo(AppContext.BaseDirectory);
+ while (directory is not null)
+ {
+ if (File.Exists(Path.Combine(directory.FullName, "Aetheris.slnx")))
+ {
+ return directory.FullName;
+ }
+
+ directory = directory.Parent;
+ }
+
+ throw new InvalidOperationException("Unable to locate repository root.");
+ }
+}
diff --git a/Aetheris.Firmament.FrictionLab/Harness/FrictionLabSummary.cs b/Aetheris.Firmament.FrictionLab/Harness/FrictionLabSummary.cs
new file mode 100644
index 00000000..cc264402
--- /dev/null
+++ b/Aetheris.Firmament.FrictionLab/Harness/FrictionLabSummary.cs
@@ -0,0 +1,37 @@
+namespace Aetheris.Firmament.FrictionLab.Harness;
+
+internal sealed record FrictionLabSummary(
+ int TotalCases,
+ int SuccessCount,
+ int PartialCount,
+ int FailureCount,
+ IReadOnlyList<FrictionCaseResult> CaseResults,
+ string SummaryPath)
+{
+ public static FrictionLabSummary FromResults(IReadOnlyList<FrictionCaseResult> caseResults, string summaryPath)
+ {
+ var successCount = caseResults.Count(result => string.Equals(result.BuildStatus, "success", StringComparison.Ordinal));
+ var partialCount = caseResults.Count(result => string.Equals(result.BuildStatus, "partial", StringComparison.Ordinal));
+ var failureCount = caseResults.Count(result => string.Equals(result.BuildStatus, "failure", StringComparison.Ordinal));
+
+ return new FrictionLabSummary(
+ caseResults.Count,
+ successCount,
+ partialCount,
+ failureCount,
+ caseResults,
+ summaryPath);
+ }
+}
+
+internal sealed record FrictionCaseResult(
+ string CaseId,
+ string BuildStatus,
+ string? StepArtifactPath,
+ IReadOnlyList<FrictionDiagnostic> Diagnostics);
+
+internal sealed record FrictionDiagnostic(
+ string Code,
+ string Severity,
+ string Message,
+ string? Source);
diff --git a/Aetheris.Firmament.FrictionLab/Harness/review.schema.toon b/Aetheris.Firmament.FrictionLab/Harness/review.schema.toon
new file mode 100644
index 00000000..ea14bb46
--- /dev/null
+++ b/Aetheris.Firmament.FrictionLab/Harness/review.schema.toon
@@ -0,0 +1,19 @@
+review_schema:
+ version: 1
+ file: review.toon
+ required_fields[6]:
+ case_id
+ possible
+ awkwardness
+ pain_points
+ proposed_features
+ reviewer_verdict
+ enums:
+ possible[3]:
+ true
+ false
+ partial
+ awkwardness[3]:
+ low
+ medium
+ high
diff --git a/Aetheris.Firmament.FrictionLab/Program.cs b/Aetheris.Firmament.FrictionLab/Program.cs
new file mode 100644
index 00000000..7b57a559
--- /dev/null
+++ b/Aetheris.Firmament.FrictionLab/Program.cs
@@ -0,0 +1,7 @@
+using Aetheris.Firmament.FrictionLab.Harness;
+
+var runner = new FrictionLabRunner();
+var summary = runner.Run();
+
+Console.WriteLine($"FrictionLab processed {summary.TotalCases} case(s): success={summary.SuccessCount}, partial={summary.PartialCount}, failure={summary.FailureCount}.");
+Console.WriteLine($"Summary: {summary.SummaryPath}");
diff --git a/Aetheris.Firmament.FrictionLab/README.md b/Aetheris.Firmament.FrictionLab/README.md
new file mode 100644
index 00000000..e11474f6
--- /dev/null
+++ b/Aetheris.Firmament.FrictionLab/README.md
@@ -0,0 +1,26 @@
+# Aetheris.Firmament.FrictionLab
+
+Aetheris.Firmament.FrictionLab is an **authoring friction lab** for Firmament, not a production feature project.
+
+## Purpose
+
+- Capture real `.firmament` part-authoring attempts in `Cases/`.
+- Run each case through the **real** Aetheris Firmament compile/export pipeline.
+- Emit STEP artifacts and per-run summary output for quick friction review.
+- Record authoring friction explicitly in `review.toon` instead of forcing workarounds.
+
+## Rules
+
+- Do not author production kernel or language expansion code here.
+- If a case cannot be expressed cleanly in current Firmament, **stop and record the friction**.
+- Do not “pretzel” cases into unnatural constructs just to claim success.
+
+## Run
+
+```bash
+dotnet run --project Aetheris.Firmament.FrictionLab/Aetheris.Firmament.FrictionLab.csproj
+```
+
+Outputs:
+- `Reports/summary.json`
+- `Reports/Artifacts/*.step` (for successful exports)
diff --git a/Aetheris.Firmament.FrictionLab/Reports/Artifacts/flange-plate-hole-pattern.step b/Aetheris.Firmament.FrictionLab/Reports/Artifacts/flange-plate-hole-pattern.step
new file mode 100644
index 00000000..b8359ac0
--- /dev/null
+++ b/Aetheris.Firmament.FrictionLab/Reports/Artifacts/flange-plate-hole-pattern.step
@@ -0,0 +1,268 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION(('Aetheris AP242 subset export'),'2;1');
+FILE_NAME('aetheris_export.step','1970-01-01T00:00:00',('Aetheris'),('Aetheris'),'Aetheris.Kernel','Aetheris.Kernel','');
+FILE_SCHEMA(('AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF'));
+ENDSEC;
+DATA;
+#1=CARTESIAN_POINT($,(20,0,-4));
+#2=DIRECTION($,(0,0,-1));
+#3=DIRECTION($,(1,0,0));
+#4=AXIS2_PLACEMENT_3D($,#1,#2,#3);
+#5=PLANE($,#4);
+#6=CARTESIAN_POINT($,(-40,-20,-4));
+#7=VERTEX_POINT($,#6);
+#8=CARTESIAN_POINT($,(40,-20,-4));
+#9=VERTEX_POINT($,#8);
+#10=CARTESIAN_POINT($,(-40,-20,-4));
+#11=DIRECTION($,(1,0,0));
+#12=VECTOR($,#11,1);
+#13=LINE($,#10,#12);
+#14=EDGE_CURVE($,#7,#9,#13,.T.);
+#15=ORIENTED_EDGE($,$,$,#14,.T.);
+#16=CARTESIAN_POINT($,(40,20,-4));
+#17=VERTEX_POINT($,#16);
+#18=CARTESIAN_POINT($,(40,-20,-4));
+#19=DIRECTION($,(0,1,0));
+#20=VECTOR($,#19,1);
+#21=LINE($,#18,#20);
+#22=EDGE_CURVE($,#9,#17,#21,.T.);
+#23=ORIENTED_EDGE($,$,$,#22,.T.);
+#24=CARTESIAN_POINT($,(-40,20,-4));
+#25=VERTEX_POINT($,#24);
+#26=CARTESIAN_POINT($,(40,20,-4));
+#27=DIRECTION($,(-1,0,0));
+#28=VECTOR($,#27,1);
+#29=LINE($,#26,#28);
+#30=EDGE_CURVE($,#17,#25,#29,.T.);
+#31=ORIENTED_EDGE($,$,$,#30,.T.);
+#32=CARTESIAN_POINT($,(-40,20,-4));
+#33=DIRECTION($,(0,-1,0));
+#34=VECTOR($,#33,1);
+#35=LINE($,#32,#34);
+#36=EDGE_CURVE($,#25,#7,#35,.T.);
+#37=ORIENTED_EDGE($,$,$,#36,.T.);
+#38=EDGE_LOOP($,(#15,#23,#31,#37));
+#39=FACE_OUTER_BOUND('',#38,.T.);
+#40=CARTESIAN_POINT($,(4,0,-4));
+#41=VERTEX_POINT($,#40);
+#42=CARTESIAN_POINT($,(0,0,-4));
+#43=DIRECTION($,(0,0,1));
+#44=DIRECTION($,(1,0,0));
+#45=AXIS2_PLACEMENT_3D($,#42,#43,#44);
+#46=CIRCLE($,#45,4);
+#47=EDGE_CURVE($,#41,#41,#46,.T.);
+#48=ORIENTED_EDGE($,$,$,#47,.F.);
+#49=EDGE_LOOP($,(#48));
+#50=FACE_BOUND('',#49,.T.);
+#51=CARTESIAN_POINT($,(24,0,-4));
+#52=VERTEX_POINT($,#51);
+#53=CARTESIAN_POINT($,(20,0,-4));
+#54=DIRECTION($,(0,0,1));
+#55=DIRECTION($,(1,0,0));
+#56=AXIS2_PLACEMENT_3D($,#53,#54,#55);
+#57=CIRCLE($,#56,4);
+#58=EDGE_CURVE($,#52,#52,#57,.T.);
+#59=ORIENTED_EDGE($,$,$,#58,.F.);
+#60=EDGE_LOOP($,(#59));
+#61=FACE_BOUND('',#60,.T.);
+#62=ADVANCED_FACE('',(#39,#50,#61),#5,.T.);
+#63=CARTESIAN_POINT($,(20,0,4));
+#64=DIRECTION($,(0,0,1));
+#65=DIRECTION($,(1,0,0));
+#66=AXIS2_PLACEMENT_3D($,#63,#64,#65);
+#67=PLANE($,#66);
+#68=CARTESIAN_POINT($,(-40,-20,4));
+#69=VERTEX_POINT($,#68);
+#70=CARTESIAN_POINT($,(40,-20,4));
+#71=VERTEX_POINT($,#70);
+#72=CARTESIAN_POINT($,(-40,-20,4));
+#73=DIRECTION($,(1,0,0));
+#74=VECTOR($,#73,1);
+#75=LINE($,#72,#74);
+#76=EDGE_CURVE($,#69,#71,#75,.T.);
+#77=ORIENTED_EDGE($,$,$,#76,.T.);
+#78=CARTESIAN_POINT($,(40,20,4));
+#79=VERTEX_POINT($,#78);
+#80=CARTESIAN_POINT($,(40,-20,4));
+#81=DIRECTION($,(0,1,0));
+#82=VECTOR($,#81,1);
+#83=LINE($,#80,#82);
+#84=EDGE_CURVE($,#71,#79,#83,.T.);
+#85=ORIENTED_EDGE($,$,$,#84,.T.);
+#86=CARTESIAN_POINT($,(-40,20,4));
+#87=VERTEX_POINT($,#86);
+#88=CARTESIAN_POINT($,(40,20,4));
+#89=DIRECTION($,(-1,0,0));
+#90=VECTOR($,#89,1);
+#91=LINE($,#88,#90);
+#92=EDGE_CURVE($,#79,#87,#91,.T.);
+#93=ORIENTED_EDGE($,$,$,#92,.T.);
+#94=CARTESIAN_POINT($,(-40,20,4));
+#95=DIRECTION($,(0,-1,0));
+#96=VECTOR($,#95,1);
+#97=LINE($,#94,#96);
+#98=EDGE_CURVE($,#87,#69,#97,.T.);
+#99=ORIENTED_EDGE($,$,$,#98,.T.);
+#100=EDGE_LOOP($,(#77,#85,#93,#99));
+#101=FACE_OUTER_BOUND('',#100,.T.);
+#102=CARTESIAN_POINT($,(4,0,4));
+#103=VERTEX_POINT($,#102);
+#104=CARTESIAN_POINT($,(0,0,4));
+#105=DIRECTION($,(0,0,1));
+#106=DIRECTION($,(1,0,0));
+#107=AXIS2_PLACEMENT_3D($,#104,#105,#106);
+#108=CIRCLE($,#107,4);
+#109=EDGE_CURVE($,#103,#103,#108,.T.);
+#110=ORIENTED_EDGE($,$,$,#109,.T.);
+#111=EDGE_LOOP($,(#110));
+#112=FACE_BOUND('',#111,.T.);
+#113=CARTESIAN_POINT($,(24,0,4));
+#114=VERTEX_POINT($,#113);
+#115=CARTESIAN_POINT($,(20,0,4));
+#116=DIRECTION($,(0,0,1));
+#117=DIRECTION($,(1,0,0));
+#118=AXIS2_PLACEMENT_3D($,#115,#116,#117);
+#119=CIRCLE($,#118,4);
+#120=EDGE_CURVE($,#114,#114,#119,.T.);
+#121=ORIENTED_EDGE($,$,$,#120,.T.);
+#122=EDGE_LOOP($,(#121));
+#123=FACE_BOUND('',#122,.T.);
+#124=ADVANCED_FACE('',(#101,#112,#123),#67,.T.);
+#125=CARTESIAN_POINT($,(20,-20,0));
+#126=DIRECTION($,(0,-1,0));
+#127=DIRECTION($,(1,0,0));
+#128=AXIS2_PLACEMENT_3D($,#125,#126,#127);
+#129=PLANE($,#128);
+#130=ORIENTED_EDGE($,$,$,#14,.T.);
+#131=CARTESIAN_POINT($,(40,-20,-4));
+#132=DIRECTION($,(0,0,1));
+#133=VECTOR($,#132,1);
+#134=LINE($,#131,#133);
+#135=EDGE_CURVE($,#9,#71,#134,.T.);
+#136=ORIENTED_EDGE($,$,$,#135,.T.);
+#137=ORIENTED_EDGE($,$,$,#76,.F.);
+#138=CARTESIAN_POINT($,(-40,-20,-4));
+#139=DIRECTION($,(0,0,1));
+#140=VECTOR($,#139,1);
+#141=LINE($,#138,#140);
+#142=EDGE_CURVE($,#7,#69,#141,.T.);
+#143=ORIENTED_EDGE($,$,$,#142,.F.);
+#144=EDGE_LOOP($,(#130,#136,#137,#143));
+#145=FACE_OUTER_BOUND('',#144,.T.);
+#146=ADVANCED_FACE('',(#145),#129,.T.);
+#147=CARTESIAN_POINT($,(40,0,0));
+#148=DIRECTION($,(1,0,0));
+#149=DIRECTION($,(0,1,0));
+#150=AXIS2_PLACEMENT_3D($,#147,#148,#149);
+#151=PLANE($,#150);
+#152=ORIENTED_EDGE($,$,$,#22,.T.);
+#153=CARTESIAN_POINT($,(40,20,-4));
+#154=DIRECTION($,(0,0,1));
+#155=VECTOR($,#154,1);
+#156=LINE($,#153,#155);
+#157=EDGE_CURVE($,#17,#79,#156,.T.);
+#158=ORIENTED_EDGE($,$,$,#157,.T.);
+#159=ORIENTED_EDGE($,$,$,#84,.F.);
+#160=ORIENTED_EDGE($,$,$,#135,.F.);
+#161=EDGE_LOOP($,(#152,#158,#159,#160));
+#162=FACE_OUTER_BOUND('',#161,.T.);
+#163=ADVANCED_FACE('',(#162),#151,.T.);
+#164=CARTESIAN_POINT($,(20,20,0));
+#165=DIRECTION($,(0,1,0));
+#166=DIRECTION($,(-1,0,0));
+#167=AXIS2_PLACEMENT_3D($,#164,#165,#166);
+#168=PLANE($,#167);
+#169=ORIENTED_EDGE($,$,$,#30,.T.);
+#170=CARTESIAN_POINT($,(-40,20,-4));
+#171=DIRECTION($,(0,0,1));
+#172=VECTOR($,#171,1);
+#173=LINE($,#170,#172);
+#174=EDGE_CURVE($,#25,#87,#173,.T.);
+#175=ORIENTED_EDGE($,$,$,#174,.T.);
+#176=ORIENTED_EDGE($,$,$,#92,.F.);
+#177=ORIENTED_EDGE($,$,$,#157,.F.);
+#178=EDGE_LOOP($,(#169,#175,#176,#177));
+#179=FACE_OUTER_BOUND('',#178,.T.);
+#180=ADVANCED_FACE('',(#179),#168,.T.);
+#181=CARTESIAN_POINT($,(-40,0,0));
+#182=DIRECTION($,(-1,0,0));
+#183=DIRECTION($,(0,1,0));
+#184=AXIS2_PLACEMENT_3D($,#181,#182,#183);
+#185=PLANE($,#184);
+#186=ORIENTED_EDGE($,$,$,#36,.T.);
+#187=ORIENTED_EDGE($,$,$,#142,.T.);
+#188=ORIENTED_EDGE($,$,$,#98,.F.);
+#189=ORIENTED_EDGE($,$,$,#174,.F.);
+#190=EDGE_LOOP($,(#186,#187,#188,#189));
+#191=FACE_OUTER_BOUND('',#190,.T.);
+#192=ADVANCED_FACE('',(#191),#185,.T.);
+#193=CARTESIAN_POINT($,(0,0,-4));
+#194=DIRECTION($,(0,0,1));
+#195=DIRECTION($,(1,0,0));
+#196=AXIS2_PLACEMENT_3D($,#193,#194,#195);
+#197=CYLINDRICAL_SURFACE($,#196,4);
+#198=CARTESIAN_POINT($,(4,0,4));
+#199=VERTEX_POINT($,#198);
+#200=CARTESIAN_POINT($,(4,0,-4));
+#201=VERTEX_POINT($,#200);
+#202=CARTESIAN_POINT($,(4,0,4));
+#203=DIRECTION($,(0,0,-1));
+#204=VECTOR($,#203,1);
+#205=LINE($,#202,#204);
+#206=EDGE_CURVE($,#199,#201,#205,.T.);
+#207=ORIENTED_EDGE($,$,$,#206,.T.);
+#208=ORIENTED_EDGE($,$,$,#109,.F.);
+#209=ORIENTED_EDGE($,$,$,#206,.F.);
+#210=ORIENTED_EDGE($,$,$,#47,.T.);
+#211=EDGE_LOOP($,(#207,#208,#209,#210));
+#212=FACE_OUTER_BOUND('',#211,.T.);
+#213=ADVANCED_FACE('',(#212),#197,.T.);
+#214=CARTESIAN_POINT($,(20,0,-4));
+#215=DIRECTION($,(0,0,1));
+#216=DIRECTION($,(1,0,0));
+#217=AXIS2_PLACEMENT_3D($,#214,#215,#216);
+#218=CYLINDRICAL_SURFACE($,#217,4);
+#219=CARTESIAN_POINT($,(24,0,4));
+#220=VERTEX_POINT($,#219);
+#221=CARTESIAN_POINT($,(24,0,-4));
+#222=VERTEX_POINT($,#221);
+#223=CARTESIAN_POINT($,(24,0,4));
+#224=DIRECTION($,(0,0,-1));
+#225=VECTOR($,#224,1);
+#226=LINE($,#223,#225);
+#227=EDGE_CURVE($,#220,#222,#226,.T.);
+#228=ORIENTED_EDGE($,$,$,#227,.T.);
+#229=ORIENTED_EDGE($,$,$,#120,.F.);
+#230=ORIENTED_EDGE($,$,$,#227,.F.);
+#231=ORIENTED_EDGE($,$,$,#58,.T.);
+#232=EDGE_LOOP($,(#228,#229,#230,#231));
+#233=FACE_OUTER_BOUND('',#232,.T.);
+#234=ADVANCED_FACE('',(#233),#218,.T.);
+#235=CLOSED_SHELL($,(#62,#124,#146,#163,#180,#192,#213,#234));
+#236=MANIFOLD_SOLID_BREP('AetherisBody',#235);
+#237=APPLICATION_CONTEXT('mechanical design');
+#238=PRODUCT_CONTEXT('',#237,'mechanical');
+#239=PRODUCT('AETHERIS','AetherisBody','',(#238));
+#240=PRODUCT_DEFINITION_FORMATION('','',#239);
+#241=PRODUCT_DEFINITION_CONTEXT('design',#237,'design');
+#242=PRODUCT_DEFINITION('','',#240,#241);
+#243=PRODUCT_DEFINITION_SHAPE('','',#242);
+#244=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
+#245=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
+#246=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
+#247=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNIT_ASSIGNED_CONTEXT((#244,#245,#246))REPRESENTATION_CONTEXT('3','3D'));
+#248=SHAPE_ASPECT('firmament-feature:hole_left','supported cylinder through-hole feature',#243,.FALSE.);
+#249=PROPERTY_DEFINITION('diameter:hole_left','auto-derived semantic PMI diameter',#248);
+#250=MEASURE_REPRESENTATION_ITEM('diameter',8,#244);
+#251=SHAPE_DIMENSION_REPRESENTATION('diameter:hole_left',(#250),#247);
+#252=PROPERTY_DEFINITION_REPRESENTATION(#249,#251);
+#253=SHAPE_ASPECT('firmament-feature:hole_right','supported cylinder through-hole feature',#243,.FALSE.);
+#254=PROPERTY_DEFINITION('diameter:hole_right','auto-derived semantic PMI diameter',#253);
+#255=MEASURE_REPRESENTATION_ITEM('diameter',8,#244);
+#256=SHAPE_DIMENSION_REPRESENTATION('diameter:hole_right',(#255),#247);
+#257=PROPERTY_DEFINITION_REPRESENTATION(#254,#256);
+#258=SHAPE_REPRESENTATION('AetherisBody',(#236),#247);
+#259=SHAPE_DEFINITION_REPRESENTATION(#243,#258);
+ENDSEC;
+END-ISO-10303-21;
diff --git a/Aetheris.Firmament.FrictionLab/Reports/summary.json b/Aetheris.Firmament.FrictionLab/Reports/summary.json
new file mode 100644
index 00000000..e2e464b1
--- /dev/null
+++ b/Aetheris.Firmament.FrictionLab/Reports/summary.json
@@ -0,0 +1,53 @@
+{
+ "totalCases": 3,
+ "successCount": 1,
+ "partialCount": 0,
+ "failureCount": 2,
+ "caseResults": [
+ {
+ "caseId": "blind-hole-mount-block",
+ "buildStatus": "failure",
+ "stepArtifactPath": null,
+ "diagnostics": [
+ {
+ "code": "NotImplemented",
+ "severity": "Error",
+ "message": "Requested boolean feature \u0027blind_hole\u0027 (subtract) could not be executed.",
+ "source": "firmament"
+ },
+ {
+ "code": "NotImplemented",
+ "severity": "Error",
+ "message": "Boolean feature \u0027blind_hole\u0027 (subtract) does not match the supported subtract span family; only through-holes or one-sided blind holes are allowed in this milestone.",
+ "source": "BrepBoolean.AnalyticHole.NotFullySpanning"
+ }
+ ]
+ },
+ {
+ "caseId": "flange-plate-hole-pattern",
+ "buildStatus": "success",
+ "stepArtifactPath": "Aetheris.Firmament.FrictionLab/Reports/Artifacts/flange-plate-hole-pattern.step",
+ "diagnostics": []
+ },
+ {
+ "caseId": "simple-bracket",
+ "buildStatus": "failure",
+ "stepArtifactPath": null,
+ "diagnostics": [
+ {
+ "code": "NotImplemented",
+ "severity": "Error",
+ "message": "Requested boolean feature \u0027upright_seed\u0027 (add) could not be executed.",
+ "source": "firmament"
+ },
+ {
+ "code": "NotImplemented",
+ "severity": "Error",
+ "message": "Boolean feature \u0027upright_seed\u0027 (add): Boolean Union: box union is not a single box in M13 (for example L-shaped unions).",
+ "source": "BrepBoolean.RebuildResult"
+ }
+ ]
+ }
+ ],
+ "summaryPath": "Aetheris.Firmament.FrictionLab/Reports/summary.json"
+}
\ No newline at end of file
diff --git a/Aetheris.slnx b/Aetheris.slnx
index 380e56ee..c6f35585 100644
--- a/Aetheris.slnx
+++ b/Aetheris.slnx
@@ -4,6 +4,7 @@
<Project Path="Aetheris.Kernel.Core/Aetheris.Kernel.Core.csproj" />
<Project Path="Aetheris.Kernel.Firmament/Aetheris.Kernel.Firmament.csproj" />
<Project Path="Aetheris.Kernel.Firmament.Tests/Aetheris.Kernel.Firmament.Tests.csproj" />
+ <Project Path="Aetheris.Firmament.FrictionLab/Aetheris.Firmament.FrictionLab.csproj" />
<Project Path="aetheris.client/aetheris.client.esproj">
<Build />
<Deploy />