Skip to content

Next Gen STEP AP242 Native-ish BREP Geometric Modeling Kernel

Add FRIC-B0 chimera pressure-test fixtures and boundary report

Yuechen Li9d7b78aac010
diff --git a/docs/frictionlab/FRIC-B0-chimera-pressure-test.md b/docs/frictionlab/FRIC-B0-chimera-pressure-test.md
new file mode 100644
index 00000000..207f30c9
--- /dev/null
+++ b/docs/frictionlab/FRIC-B0-chimera-pressure-test.md
@@ -0,0 +1,166 @@
+# FRIC-B0 — chimera mixed-subtract pressure test and boundary classification
+
+Date: 2026-04-19 (UTC)
+
+## Mission state
+
+**Meaningful progression**.
+
+This pressure-test milestone intentionally prioritizes boundary extraction over feature completion. The run produced a high-density rejection map, and isolated a key upstream blocker: feature-graph gating currently prevents most mixed analytic+prismatic follow-on probes from reaching the `BrepBooleanBoxMixedThroughVoidBuilder` family.
+
+## Source-of-truth inspection (code + CLI)
+
+### CLI capability check
+
+Commands:
+
+- `dotnet run --project Aetheris.CLI -- --help`
+- `dotnet run --project Aetheris.CLI -- build --help`
+- `dotnet run --project Aetheris.CLI -- analyze --help`
+
+Observed: CLI supports build/analyze/canon/asm workflows; no direct “boolean family debug route” command is exposed in CLI surface for bypassing Firmament feature-graph validation.
+
+### Boolean-family boundary checks in code
+
+Key boundaries confirmed in code before fixture authoring:
+
+- Mixed through-void builder hard-requires box root, no open-slot history, exactly one analytic history entry, through-span only, cylinder/cone only, world-Z axis, containment-only interaction class, strict non-grazing margin.
+- Prismatic subtract routing requires recognized box root and strict footprint containment; prior history must stay in bounded analytic/open-slot families.
+- Rebuild route dispatches to mixed builder only when prismatic tool is present and `leftComposition.Holes.Count == 1`.
+- Firmament safe-subtract feature-graph forbids non-cylinder/cone follow-on tools once safe subtract chain starts (this is the dominant blocker for mixed probes from `.firmament`).
+
+## Chimera fixtures created
+
+All fixtures are under `testdata/firmament/frictionlab/fric-b0/`.
+
+### Chimera A — box-root subtract stress block
+
+Intent: stress through vs blind, family kind spread, and mixed continuation attempts from box-root baseline.
+
+Zones:
+
+- `zone_a_through_cyl` (baseline through cylinder)
+- `zone_b_blind_cyl`
+- `zone_c_cone_through`
+- `zone_d_cone_blind`
+- `zone_e_slot_through`
+- `zone_f_tri_prism`
+- `zone_g_box_prism`
+- `zone_h_partial_overlap_slot` (analytic then prismatic follow-on attempt)
+- `zone_i_disjoint_dual_holes_then_prism`
+- `zone_j_grazing_prism` (edge-grazing follow-on attempt)
+
+### Chimera B — cylinder-root subtract stress block
+
+Intent: stress non-box-root/prismatic interactions and cylinder-root analytic constraints.
+
+Zones:
+
+- `zone_ba_through_cyl` (baseline)
+- `zone_bb_blind_cyl`
+- `zone_bc_prismatic_slot`
+- `zone_bd_box_prism`
+
+### Chimera C — history-composition stress block
+
+Intent: stress sequential history limits, open-slot/prismatic follow-on behavior, non-safe-root follow-on, and mixed-count behavior.
+
+Zones:
+
+- `zone_ca_analytic_seed_hole`
+- `zone_cb_second_analytic_hole`
+- `zone_cc_open_slot_seed` + `zone_cc_follow_on_prism`
+- `zone_cd_seed_sphere` + `zone_cd_follow_on_prism`
+- `zone_ce_hole_1` + `zone_ce_hole_2` + `zone_ce_follow_on_prism`
+- `zone_cf_mixed_prismatic_attempt`
+
+## Commands run and what they proved
+
+1. `dotnet run --project Aetheris.CLI -- --help`
+ - Proved CLI command surface and baseline availability.
+2. `dotnet run --project Aetheris.CLI -- build --help`
+ - Confirmed machine-readable diagnostics path (`--json`) for pressure test matrix capture.
+3. `for f in testdata/firmament/frictionlab/fric-b0/*.firmament; do dotnet run --project Aetheris.CLI -- build "$f" --json > artifacts/fric-b0/<name>.json; done`
+ - Produced per-zone success/failure evidence with exact diagnostics.
+4. `python3` aggregation over `artifacts/fric-b0/*.json`
+ - Clustered diagnostics into blocker classes used below.
+
+## Per-zone result matrix
+
+| Chimera | Zone | Operation attempted | Result | Exact diagnostic (source) | Blocker class | Recommendation |
+|---|---|---|---|---|---|---|
+| A | `zone_a_through_cyl` | `subtract(box, cylinder through)` | Pass | n/a | Supported baseline | Safe to generalize now (already in family) |
+| A | `zone_b_blind_cyl` | `subtract(box, cylinder blind)` | Reject | `[FIRM-SCHEMA-0006] ... fully enclosed internal void(s) ... not allowed for process 'default'` (`firmament`) | Process/schema sealed-void guard | **Must remain rejected** (unless process semantics change) |
+| A | `zone_c_cone_through` | `subtract(box, cone through)` | Pass | n/a | Supported baseline | Safe to generalize now (already in family) |
+| A | `zone_d_cone_blind` | `subtract(box, cone blind)` | Reject | `... does not match the supported subtract span family ...` (`BrepBoolean.AnalyticHole.NotFullySpanning`) | Non-through analytic continuation boundary | Generalizable later with new bounded representation |
+| A | `zone_e_slot_through` | `subtract(box, slot_cut through)` | Pass | n/a | Supported prismatic through-cut family | Safe to generalize now (already in family) |
+| A | `zone_f_tri_prism` | `subtract(box, triangular_prism through)` | Pass | n/a | Supported prismatic family | Safe to generalize now (already in family) |
+| A | `zone_g_box_prism` | `subtract(box, box through)` | Pass | n/a | Supported prismatic family | Safe to generalize now (already in family) |
+| A | `zone_h_partial_overlap_slot` | `subtract(box→analytic history, box prism)` | Reject | `unsupported follow-on tool kind 'box' ... Only nested cylinder or cone...` (`firmament.feature-graph.unsupported-follow-on-kind`) | Root/history feature-graph gate | Safe to generalize now (remove/relax gate for bounded prismatic continuation candidates) |
+| A | `zone_i_hole_right` | second analytic hole in chain | Reject | `blind-hole continuation exceeds the bounded family...` (`BrepBoolean.AnalyticHole.BlindContinuationOutsideBoundedFamily`) | Analytic continuation + span classification fragility | Generalizable later with stronger bounded history/span model |
+| A | `zone_j_grazing_prism` | analytic then edge-grazing prism | Reject | `unsupported follow-on tool kind 'box' ...` (`firmament.feature-graph.unsupported-follow-on-kind`) | Upstream gate prevents interaction classification | Generalizable later with new bounded representation (after gate relaxation + interaction classifier exposure) |
+| B | `zone_ba_through_cyl` | `subtract(cylinder, through cylinder)` | Pass | n/a | Supported cylinder-root bore family | Safe to generalize now (already in family) |
+| B | `zone_bb_blind_cyl` | `subtract(cylinder, blind cylinder)` | Reject | `... only through center bores that span both planar caps are supported.` (`BrepBoolean.AnalyticHole.NotFullySpanning`) | Cylinder-root non-through rejection | **Must remain rejected** for current architecture |
+| B | `zone_bc_prismatic_slot` | `subtract(cylinder, straight_slot)` | Reject | `sequential safe composition only supports subtracting supported analytic holes...` (`BrepBoolean.RebuildResult`) | Non-box root prismatic continuation boundary | Generalizable later with new bounded representation |
+| B | `zone_bd_box_prism` | `subtract(cylinder, box)` | Pass | n/a | Routed as bounded orthogonal pocket candidate | Safe now within narrow admissible overlap cases |
+| C | `zone_cb_second_analytic_hole` | second analytic follow-on | Reject | `blind-hole continuation exceeds the bounded family...` (`BrepBoolean.AnalyticHole.BlindContinuationOutsideBoundedFamily`) | History-span continuation fragility | Generalizable later with new bounded representation |
+| C | `zone_cc_follow_on_prism` | open-slot history then prism | Reject | `... bounded orthogonal pocket family requires a single pocket mouth... through-slots ... deferred.` (`BrepBoolean.RebuildResult`) | Open-slot history + mouth-count boundary | Generalizable later with new bounded representation |
+| C | `zone_cd_follow_on_prism` | sphere-history then prism | Reject | `bounded boolean family only supports recognized axis-aligned boxes ...` (`BrepBoolean.RebuildResult`) | Non-safe-root follow-on boundary | **Must remain rejected** (for current bounded family) |
+| C | `zone_ce_hole_2` | multi-analytic history continuation | Reject | `blind-hole continuation exceeds the bounded family...` (`BrepBoolean.AnalyticHole.BlindContinuationOutsideBoundedFamily`) | Mixed-count/history continuation limit | Generalizable later with new bounded representation |
+| C | `zone_cf_mixed_prismatic_attempt` | analytic then prismatic mixed baseline | Reject | `unsupported follow-on tool kind 'box' ...` (`firmament.feature-graph.unsupported-follow-on-kind`) | Upstream gate blocks mixed-through-void kernel path | Safe to generalize now (gate should permit bounded prismatic candidates for deeper classifier routing) |
+
+## Failure clusters
+
+1. **Feature-graph follow-on-kind hard gate**
+ - Signature: `firmament.feature-graph.unsupported-follow-on-kind`.
+ - Effect: blocks mixed analytic+prismatic probes before kernel-level interaction classification.
+
+2. **Analytic continuation/span constraints**
+ - Signature: `BrepBoolean.AnalyticHole.NotFullySpanning`, `BlindContinuationOutsideBoundedFamily`.
+ - Effect: rejects blind or ambiguously classified continuation states.
+
+3. **Root family representational boundaries**
+ - Signature: `BrepBoolean.RebuildResult` messages about recognized box roots / sequential safe composition family.
+ - Effect: non-box-root and non-safe-root follow-on requests remain bounded out.
+
+4. **Process/schema sealed-void constraint**
+ - Signature: `FIRM-SCHEMA-0006` fully enclosed internal voids disallowed in process `default`.
+ - Effect: catches certain blind-hole outcomes before/alongside geometric family checks.
+
+## Required boundary classification synthesis
+
+### Safe to generalize now
+
+- **Firmament feature-graph hard gate for prismatic follow-on after safe analytic history** appears overly strict relative to downstream bounded builders. Relaxing this gate (to allow bounded candidate routing, not unconditional acceptance) would immediately increase diagnostic depth and unlock existing mixed-through-void code paths.
+- **Prismatic family with recognized box roots** is already broad enough to serve as continuation candidate input when the history is bounded and classifiable.
+
+### Generalizable later with new bounded representation
+
+- **Non-through analytic continuation** (blind chains, cone/cylinder continuation edge cases).
+- **Open-slot history + additional prismatic operations** (multi-mouth / through-slot constraints).
+- **Mixed-count > 1 analytic histories with incoming prism**, where preserving/combining multiple void descriptors is needed.
+- **Non-contained and analytic-prismatic tangent interaction classes** in mixed mode (once feature-graph gate permits reaching these classifiers consistently).
+- **Non-box-root prismatic continuation** for cylinder roots (would need explicit bounded representation/rebuilder family).
+
+### Must remain rejected
+
+- **Degenerate tangent/edge-grazing interactions** should remain rejected as principled manifold-safety boundaries.
+- **Non-safe-root follow-on after non-bounded families** (e.g., sphere-cavity branch) should remain rejected in the current architecture.
+- **Sealed internal voids under process `default`** should remain rejected unless process policy is intentionally broadened.
+
+## Tiny fixes made during pressure test
+
+None. No architecture-broadening patches were applied.
+
+## Top 1–3 high-value next moves
+
+1. **Relax feature-graph follow-on-kind gate from “tool-kind hard reject” to “bounded candidate pass-through” for prismatic tools** so mixed-through-void builder and interaction classifiers can execute and emit precise kernel diagnostics.
+2. **Add explicit diagnostic staging labels** (recognition vs admissibility vs reconstruction vs topology degeneracy) to current `BrepBoolean.RebuildResult` fallback strings to reduce ambiguity in pressure-test analytics.
+3. **Introduce a minimal bounded multi-void history descriptor** (for `holes.Count > 1` mixed continuation) without attempting full general booleans.
+
+## What not to pursue yet
+
+- Do **not** attempt broad general CSG or arbitrary multi-family booleans.
+- Do **not** remove tangent/grazing rejection boundaries.
+- Do **not** expand non-box-root mixed prismatic support before a bounded representation and explicit reconstruction lane exist.
+
diff --git a/testdata/firmament/frictionlab/fric-b0/chimera_a_box_root_baseline.firmament b/testdata/firmament/frictionlab/fric-b0/chimera_a_box_root_baseline.firmament
new file mode 100644
index 00000000..412bdeb3
--- /dev/null
+++ b/testdata/firmament/frictionlab/fric-b0/chimera_a_box_root_baseline.firmament
@@ -0,0 +1,20 @@
+firmament:
+ version: 1
+
+model:
+ name: fric_b0_chimera_a_box_root_baseline
+ units: mm
+
+ops[2]:
+ -
+ op: box
+ id: chimera_a_root
+ size[3]: [60, 40, 20]
+ -
+ op: subtract
+ id: zone_a_through_cyl
+ from: chimera_a_root
+ with: { op: cylinder, radius: 5, height: 30 }
+ place:
+ on: origin
+ offset[3]: [-18, 0, 0]
diff --git a/testdata/firmament/frictionlab/fric-b0/chimera_a_zone_b_blind_cyl.firmament b/testdata/firmament/frictionlab/fric-b0/chimera_a_zone_b_blind_cyl.firmament
new file mode 100644
index 00000000..690dca54
--- /dev/null
+++ b/testdata/firmament/frictionlab/fric-b0/chimera_a_zone_b_blind_cyl.firmament
@@ -0,0 +1,20 @@
+firmament:
+ version: 1
+
+model:
+ name: fric_b0_chimera_a_zone_b_blind_cyl
+ units: mm
+
+ops[2]:
+ -
+ op: box
+ id: chimera_a_root
+ size[3]: [60, 40, 20]
+ -
+ op: subtract
+ id: zone_b_blind_cyl
+ from: chimera_a_root
+ with:
+ op: cylinder
+ radius: 4
+ height: 8
diff --git a/testdata/firmament/frictionlab/fric-b0/chimera_a_zone_c_through_cone.firmament b/testdata/firmament/frictionlab/fric-b0/chimera_a_zone_c_through_cone.firmament
new file mode 100644
index 00000000..2f238605
--- /dev/null
+++ b/testdata/firmament/frictionlab/fric-b0/chimera_a_zone_c_through_cone.firmament
@@ -0,0 +1,22 @@
+firmament:
+ version: 1
+model:
+ name: fric_b0_chimera_a_zone_c_through_cone
+ units: mm
+ops[2]:
+ -
+ op: box
+ id: chimera_a_root
+ size[3]: [60, 40, 20]
+ -
+ op: subtract
+ id: zone_c_cone_through
+ from: chimera_a_root
+ with:
+ op: cone
+ bottom_radius: 5
+ top_radius: 2.5
+ height: 20
+ place:
+ on: origin
+ offset[3]: [18, 0, -10]
diff --git a/testdata/firmament/frictionlab/fric-b0/chimera_a_zone_d_blind_cone.firmament b/testdata/firmament/frictionlab/fric-b0/chimera_a_zone_d_blind_cone.firmament
new file mode 100644
index 00000000..4d5a3d10
--- /dev/null
+++ b/testdata/firmament/frictionlab/fric-b0/chimera_a_zone_d_blind_cone.firmament
@@ -0,0 +1,19 @@
+firmament:
+ version: 1
+model:
+ name: fric_b0_chimera_a_zone_d_blind_cone
+ units: mm
+ops[2]:
+ -
+ op: box
+ id: chimera_a_root
+ size[3]: [60, 40, 20]
+ -
+ op: subtract
+ id: zone_d_cone_blind
+ from: chimera_a_root
+ with:
+ op: cone
+ bottom_radius: 4.5
+ top_radius: 2.5
+ height: 8
diff --git a/testdata/firmament/frictionlab/fric-b0/chimera_a_zone_e_slot_through.firmament b/testdata/firmament/frictionlab/fric-b0/chimera_a_zone_e_slot_through.firmament
new file mode 100644
index 00000000..3c6cff3c
--- /dev/null
+++ b/testdata/firmament/frictionlab/fric-b0/chimera_a_zone_e_slot_through.firmament
@@ -0,0 +1,20 @@
+firmament:
+ version: 1
+model:
+ name: fric_b0_chimera_a_zone_e_slot_through
+ units: mm
+ops[2]:
+ -
+ op: box
+ id: chimera_a_root
+ size[3]: [60, 40, 20]
+ -
+ op: subtract
+ id: zone_e_slot_through
+ from: chimera_a_root
+ with:
+ op: slot_cut
+ length: 18
+ width: 8
+ height: 24
+ corner_radius: 4
diff --git a/testdata/firmament/frictionlab/fric-b0/chimera_a_zone_f_tri_prism.firmament b/testdata/firmament/frictionlab/fric-b0/chimera_a_zone_f_tri_prism.firmament
new file mode 100644
index 00000000..bb15bd6a
--- /dev/null
+++ b/testdata/firmament/frictionlab/fric-b0/chimera_a_zone_f_tri_prism.firmament
@@ -0,0 +1,19 @@
+firmament:
+ version: 1
+model:
+ name: fric_b0_chimera_a_zone_f_tri_prism
+ units: mm
+ops[2]:
+ -
+ op: box
+ id: chimera_a_root
+ size[3]: [60, 40, 20]
+ -
+ op: subtract
+ id: zone_f_tri_prism
+ from: chimera_a_root
+ with:
+ op: triangular_prism
+ base_width: 10
+ base_depth: 8
+ height: 24
diff --git a/testdata/firmament/frictionlab/fric-b0/chimera_a_zone_g_box_prism.firmament b/testdata/firmament/frictionlab/fric-b0/chimera_a_zone_g_box_prism.firmament
new file mode 100644
index 00000000..18a3f9f8
--- /dev/null
+++ b/testdata/firmament/frictionlab/fric-b0/chimera_a_zone_g_box_prism.firmament
@@ -0,0 +1,20 @@
+firmament:
+ version: 1
+model:
+ name: fric_b0_chimera_a_zone_g_box_prism
+ units: mm
+ops[2]:
+ -
+ op: box
+ id: chimera_a_root
+ size[3]: [60, 40, 20]
+ -
+ op: subtract
+ id: zone_g_box_prism
+ from: chimera_a_root
+ with:
+ op: box
+ size[3]: [10, 8, 28]
+ place:
+ on: origin
+ offset[3]: [0, 10, 0]
diff --git a/testdata/firmament/frictionlab/fric-b0/chimera_a_zone_h_partial_overlap.firmament b/testdata/firmament/frictionlab/fric-b0/chimera_a_zone_h_partial_overlap.firmament
new file mode 100644
index 00000000..9e90c6d0
--- /dev/null
+++ b/testdata/firmament/frictionlab/fric-b0/chimera_a_zone_h_partial_overlap.firmament
@@ -0,0 +1,28 @@
+firmament:
+ version: 1
+model:
+ name: fric_b0_chimera_a_zone_h_partial_overlap
+ units: mm
+ops[3]:
+ -
+ op: box
+ id: chimera_a_root
+ size[3]: [60, 40, 20]
+ -
+ op: subtract
+ id: zone_h_seed_hole
+ from: chimera_a_root
+ with:
+ op: cylinder
+ radius: 4
+ height: 30
+ -
+ op: subtract
+ id: zone_h_partial_overlap_slot
+ from: zone_h_seed_hole
+ with:
+ op: box
+ size[3]: [9, 8, 24]
+ place:
+ on: origin
+ offset[3]: [5, 0, 0]
diff --git a/testdata/firmament/frictionlab/fric-b0/chimera_a_zone_i_disjoint_dual_holes_then_prism.firmament b/testdata/firmament/frictionlab/fric-b0/chimera_a_zone_i_disjoint_dual_holes_then_prism.firmament
new file mode 100644
index 00000000..1f613a88
--- /dev/null
+++ b/testdata/firmament/frictionlab/fric-b0/chimera_a_zone_i_disjoint_dual_holes_then_prism.firmament
@@ -0,0 +1,39 @@
+firmament:
+ version: 1
+model:
+ name: fric_b0_chimera_a_zone_i_disjoint_dual_holes_then_prism
+ units: mm
+ops[4]:
+ -
+ op: box
+ id: chimera_a_root
+ size[3]: [60, 40, 20]
+ -
+ op: subtract
+ id: zone_i_hole_left
+ from: chimera_a_root
+ with:
+ op: cylinder
+ radius: 3
+ height: 30
+ place:
+ on: origin
+ offset[3]: [-10, 0, 0]
+ -
+ op: subtract
+ id: zone_i_hole_right
+ from: zone_i_hole_left
+ with:
+ op: cylinder
+ radius: 3
+ height: 30
+ place:
+ on: origin
+ offset[3]: [10, 0, 0]
+ -
+ op: subtract
+ id: zone_i_follow_on_prism
+ from: zone_i_hole_right
+ with:
+ op: box
+ size[3]: [8, 10, 24]
diff --git a/testdata/firmament/frictionlab/fric-b0/chimera_a_zone_j_edge_grazing.firmament b/testdata/firmament/frictionlab/fric-b0/chimera_a_zone_j_edge_grazing.firmament
new file mode 100644
index 00000000..c50c1385
--- /dev/null
+++ b/testdata/firmament/frictionlab/fric-b0/chimera_a_zone_j_edge_grazing.firmament
@@ -0,0 +1,28 @@
+firmament:
+ version: 1
+model:
+ name: fric_b0_chimera_a_zone_j_edge_grazing
+ units: mm
+ops[3]:
+ -
+ op: box
+ id: chimera_a_root
+ size[3]: [60, 40, 20]
+ -
+ op: subtract
+ id: zone_j_seed_hole
+ from: chimera_a_root
+ with:
+ op: cylinder
+ radius: 4
+ height: 30
+ -
+ op: subtract
+ id: zone_j_grazing_prism
+ from: zone_j_seed_hole
+ with:
+ op: box
+ size[3]: [8, 8, 24]
+ place:
+ on: origin
+ offset[3]: [8, 0, 0]
diff --git a/testdata/firmament/frictionlab/fric-b0/chimera_b_cylinder_root_baseline.firmament b/testdata/firmament/frictionlab/fric-b0/chimera_b_cylinder_root_baseline.firmament
new file mode 100644
index 00000000..684f4916
--- /dev/null
+++ b/testdata/firmament/frictionlab/fric-b0/chimera_b_cylinder_root_baseline.firmament
@@ -0,0 +1,19 @@
+firmament:
+ version: 1
+model:
+ name: fric_b0_chimera_b_cylinder_root_baseline
+ units: mm
+ops[2]:
+ -
+ op: cylinder
+ id: chimera_b_root
+ radius: 25
+ height: 20
+ -
+ op: subtract
+ id: zone_ba_through_cyl
+ from: chimera_b_root
+ with:
+ op: cylinder
+ radius: 7
+ height: 30
diff --git a/testdata/firmament/frictionlab/fric-b0/chimera_b_zone_bb_blind_cyl.firmament b/testdata/firmament/frictionlab/fric-b0/chimera_b_zone_bb_blind_cyl.firmament
new file mode 100644
index 00000000..db355289
--- /dev/null
+++ b/testdata/firmament/frictionlab/fric-b0/chimera_b_zone_bb_blind_cyl.firmament
@@ -0,0 +1,19 @@
+firmament:
+ version: 1
+model:
+ name: fric_b0_chimera_b_zone_bb_blind_cyl
+ units: mm
+ops[2]:
+ -
+ op: cylinder
+ id: chimera_b_root
+ radius: 25
+ height: 20
+ -
+ op: subtract
+ id: zone_bb_blind_cyl
+ from: chimera_b_root
+ with:
+ op: cylinder
+ radius: 7
+ height: 8
diff --git a/testdata/firmament/frictionlab/fric-b0/chimera_b_zone_bc_prismatic_slot.firmament b/testdata/firmament/frictionlab/fric-b0/chimera_b_zone_bc_prismatic_slot.firmament
new file mode 100644
index 00000000..3708d26f
--- /dev/null
+++ b/testdata/firmament/frictionlab/fric-b0/chimera_b_zone_bc_prismatic_slot.firmament
@@ -0,0 +1,20 @@
+firmament:
+ version: 1
+model:
+ name: fric_b0_chimera_b_zone_bc_prismatic_slot
+ units: mm
+ops[2]:
+ -
+ op: cylinder
+ id: chimera_b_root
+ radius: 25
+ height: 20
+ -
+ op: subtract
+ id: zone_bc_prismatic_slot
+ from: chimera_b_root
+ with:
+ op: straight_slot
+ length: 20
+ width: 8
+ height: 24
diff --git a/testdata/firmament/frictionlab/fric-b0/chimera_b_zone_bd_box_prism.firmament b/testdata/firmament/frictionlab/fric-b0/chimera_b_zone_bd_box_prism.firmament
new file mode 100644
index 00000000..2fb1a078
--- /dev/null
+++ b/testdata/firmament/frictionlab/fric-b0/chimera_b_zone_bd_box_prism.firmament
@@ -0,0 +1,18 @@
+firmament:
+ version: 1
+model:
+ name: fric_b0_chimera_b_zone_bd_box_prism
+ units: mm
+ops[2]:
+ -
+ op: cylinder
+ id: chimera_b_root
+ radius: 25
+ height: 20
+ -
+ op: subtract
+ id: zone_bd_box_prism
+ from: chimera_b_root
+ with:
+ op: box
+ size[3]: [10, 8, 24]
diff --git a/testdata/firmament/frictionlab/fric-b0/chimera_c_history_baseline.firmament b/testdata/firmament/frictionlab/fric-b0/chimera_c_history_baseline.firmament
new file mode 100644
index 00000000..76253cd0
--- /dev/null
+++ b/testdata/firmament/frictionlab/fric-b0/chimera_c_history_baseline.firmament
@@ -0,0 +1,30 @@
+firmament:
+ version: 1
+model:
+ name: fric_b0_chimera_c_history_baseline
+ units: mm
+ops[3]:
+ -
+ op: box
+ id: chimera_c_root
+ size[3]: [60, 40, 20]
+ -
+ op: subtract
+ id: zone_ca_analytic_seed_hole
+ from: chimera_c_root
+ with:
+ op: cylinder
+ radius: 4
+ height: 30
+ -
+ op: subtract
+ id: zone_cb_second_analytic_hole
+ from: zone_ca_analytic_seed_hole
+ with:
+ op: cone
+ bottom_radius: 3.5
+ top_radius: 2
+ height: 30
+ place:
+ on: origin
+ offset[3]: [14, 0, 0]
diff --git a/testdata/firmament/frictionlab/fric-b0/chimera_c_zone_cc_open_slot_history.firmament b/testdata/firmament/frictionlab/fric-b0/chimera_c_zone_cc_open_slot_history.firmament
new file mode 100644
index 00000000..f0454a7c
--- /dev/null
+++ b/testdata/firmament/frictionlab/fric-b0/chimera_c_zone_cc_open_slot_history.firmament
@@ -0,0 +1,26 @@
+firmament:
+ version: 1
+model:
+ name: fric_b0_chimera_c_zone_cc_open_slot_history
+ units: mm
+ops[3]:
+ -
+ op: box
+ id: chimera_c_root
+ size[3]: [60, 40, 20]
+ -
+ op: subtract
+ id: zone_cc_open_slot_seed
+ from: chimera_c_root
+ with:
+ op: straight_slot
+ length: 20
+ width: 8
+ height: 24
+ -
+ op: subtract
+ id: zone_cc_follow_on_prism
+ from: zone_cc_open_slot_seed
+ with:
+ op: box
+ size[3]: [10, 10, 24]
diff --git a/testdata/firmament/frictionlab/fric-b0/chimera_c_zone_cd_non_cyl_cone_analytic_history.firmament b/testdata/firmament/frictionlab/fric-b0/chimera_c_zone_cd_non_cyl_cone_analytic_history.firmament
new file mode 100644
index 00000000..0aed942c
--- /dev/null
+++ b/testdata/firmament/frictionlab/fric-b0/chimera_c_zone_cd_non_cyl_cone_analytic_history.firmament
@@ -0,0 +1,24 @@
+firmament:
+ version: 1
+model:
+ name: fric_b0_chimera_c_zone_cd_non_cyl_cone_analytic_history
+ units: mm
+ops[3]:
+ -
+ op: box
+ id: chimera_c_root
+ size[3]: [60, 40, 20]
+ -
+ op: subtract
+ id: zone_cd_seed_sphere
+ from: chimera_c_root
+ with:
+ op: sphere
+ radius: 5
+ -
+ op: subtract
+ id: zone_cd_follow_on_prism
+ from: zone_cd_seed_sphere
+ with:
+ op: box
+ size[3]: [10, 10, 24]
diff --git a/testdata/firmament/frictionlab/fric-b0/chimera_c_zone_ce_multi_analytic_then_prism.firmament b/testdata/firmament/frictionlab/fric-b0/chimera_c_zone_ce_multi_analytic_then_prism.firmament
new file mode 100644
index 00000000..18c203df
--- /dev/null
+++ b/testdata/firmament/frictionlab/fric-b0/chimera_c_zone_ce_multi_analytic_then_prism.firmament
@@ -0,0 +1,40 @@
+firmament:
+ version: 1
+model:
+ name: fric_b0_chimera_c_zone_ce_multi_analytic_then_prism
+ units: mm
+ops[4]:
+ -
+ op: box
+ id: chimera_c_root
+ size[3]: [60, 40, 20]
+ -
+ op: subtract
+ id: zone_ce_hole_1
+ from: chimera_c_root
+ with:
+ op: cylinder
+ radius: 3.5
+ height: 30
+ place:
+ on: origin
+ offset[3]: [-12, 0, 0]
+ -
+ op: subtract
+ id: zone_ce_hole_2
+ from: zone_ce_hole_1
+ with:
+ op: cone
+ bottom_radius: 3
+ top_radius: 2
+ height: 30
+ place:
+ on: origin
+ offset[3]: [12, 0, 0]
+ -
+ op: subtract
+ id: zone_ce_follow_on_prism
+ from: zone_ce_hole_2
+ with:
+ op: box
+ size[3]: [12, 14, 24]
diff --git a/testdata/firmament/frictionlab/fric-b0/chimera_c_zone_cf_mixed_prismatic_baseline_blocked.firmament b/testdata/firmament/frictionlab/fric-b0/chimera_c_zone_cf_mixed_prismatic_baseline_blocked.firmament
new file mode 100644
index 00000000..ff54919e
--- /dev/null
+++ b/testdata/firmament/frictionlab/fric-b0/chimera_c_zone_cf_mixed_prismatic_baseline_blocked.firmament
@@ -0,0 +1,25 @@
+firmament:
+ version: 1
+model:
+ name: fric_b0_chimera_c_zone_cf_mixed_prismatic_baseline_blocked
+ units: mm
+ops[3]:
+ -
+ op: box
+ id: chimera_c_root
+ size[3]: [60, 40, 20]
+ -
+ op: subtract
+ id: zone_cf_analytic_seed_hole
+ from: chimera_c_root
+ with:
+ op: cylinder
+ radius: 4
+ height: 30
+ -
+ op: subtract
+ id: zone_cf_mixed_prismatic_attempt
+ from: zone_cf_analytic_seed_hole
+ with:
+ op: box
+ size[3]: [18, 12, 24]