Skip to content

Next Gen STEP AP242 Native-ish BREP Geometric Modeling Kernel

FL2a targeted friction reassessment rerun report

Yuechen Lid8651439d4b0
diff --git a/Aetheris.Firmament.FrictionLab/Cases/blind-hole-mount-block/part.firmament b/Aetheris.Firmament.FrictionLab/Cases/blind-hole-mount-block/part.firmament
index 5ab27f75..ffb99450 100644
--- a/Aetheris.Firmament.FrictionLab/Cases/blind-hole-mount-block/part.firmament
+++ b/Aetheris.Firmament.FrictionLab/Cases/blind-hole-mount-block/part.firmament
@@ -23,8 +23,8 @@ ops[2]:
radius: 5
height: 10
place:
- on: origin
+ on_face: base.top_face
offset[3]:
0
0
- 5
+ -10
diff --git a/Aetheris.Firmament.FrictionLab/Cases/blind-hole-mount-block/review.toon b/Aetheris.Firmament.FrictionLab/Cases/blind-hole-mount-block/review.toon
index b17d5e7f..b739f7bc 100644
--- a/Aetheris.Firmament.FrictionLab/Cases/blind-hole-mount-block/review.toon
+++ b/Aetheris.Firmament.FrictionLab/Cases/blind-hole-mount-block/review.toon
@@ -7,3 +7,8 @@ pain_points[2]:
proposed_features[1]:
- "Broaden subtract span-family support and expose explicit blind-hole capability constraints."
reviewer_verdict: "Stopped intentionally; friction captured for future feature pressure."
+previous_status: partial
+current_status: partial
+changed: no
+blocker_class: unchanged_kernel_blocker
+blocker_remaining: "Blind-hole subtract still violates supported subtract span-family envelope."
diff --git a/Aetheris.Firmament.FrictionLab/Cases/counterbore-hole/review.toon b/Aetheris.Firmament.FrictionLab/Cases/counterbore-hole/review.toon
index f8eb645e..829b804c 100644
--- a/Aetheris.Firmament.FrictionLab/Cases/counterbore-hole/review.toon
+++ b/Aetheris.Firmament.FrictionLab/Cases/counterbore-hole/review.toon
@@ -8,3 +8,8 @@ proposed_features[2]:
- "Native hole feature supporting counterbore/countersink parameters."
- "Axis-reuse reference between sequential subtract tools."
reviewer_verdict: "Intent is representable but awkward and sensitive to subtract constraints."
+previous_status: partial
+current_status: partial
+changed: no
+blocker_class: unchanged_kernel_blocker
+blocker_remaining: "Counterbore pocket stage is still outside the supported subtract span family."
diff --git a/Aetheris.Firmament.FrictionLab/Cases/flange-bolt-circle/part.firmament b/Aetheris.Firmament.FrictionLab/Cases/flange-bolt-circle/part.firmament
index 7154b4f5..225f5ee8 100644
--- a/Aetheris.Firmament.FrictionLab/Cases/flange-bolt-circle/part.firmament
+++ b/Aetheris.Firmament.FrictionLab/Cases/flange-bolt-circle/part.firmament
@@ -22,61 +22,28 @@ ops[6]:
height: 24
-
- op: subtract
- id: bolt_0
- from: center_bore
- with:
- op: cylinder
- radius: 4
- height: 24
- place:
- on: origin
- offset[3]:
- 25
- 0
- 0
-
- -
- op: subtract
- id: bolt_90
- from: bolt_0
- with:
- op: cylinder
- radius: 4
- height: 24
- place:
- on: origin
- offset[3]:
- 0
- 25
- 0
+ op: cylinder
+ id: axis_ref
+ radius: 1
+ height: 12
-
op: subtract
- id: bolt_180
- from: bolt_90
+ id: bolt_0
+ from: center_bore
with:
op: cylinder
radius: 4
height: 24
place:
on: origin
- offset[3]:
- -25
- 0
- 0
+ around_axis: axis_ref.side_face
+ radial_offset: 25
+ angle_degrees: 0
-
- op: subtract
- id: bolt_270
- from: bolt_180
- with:
- op: cylinder
- radius: 4
- height: 24
- place:
- on: origin
- offset[3]:
- 0
- -25
- 0
+ op: pattern_circular
+ source: bolt_0
+ count: 4
+ axis: axis_ref.side_face
+ angle_step_degrees: 90
diff --git a/Aetheris.Firmament.FrictionLab/Cases/flange-bolt-circle/review.toon b/Aetheris.Firmament.FrictionLab/Cases/flange-bolt-circle/review.toon
index a45e334f..0a7ee14a 100644
--- a/Aetheris.Firmament.FrictionLab/Cases/flange-bolt-circle/review.toon
+++ b/Aetheris.Firmament.FrictionLab/Cases/flange-bolt-circle/review.toon
@@ -8,3 +8,8 @@ proposed_features[2]:
- "Polar pattern operation for repeated cuts around an axis."
- "Parameter blocks for shared hole dimensions."
reviewer_verdict: "Possible today, but repetitive and error-prone for larger bolt counts."
+previous_status: failure
+current_status: failure
+changed: yes
+blocker_class: improved_but_still_blocked
+change_note: "F2/F3 removed the old cylinder-root entry blocker; now blocked later by hole-interference/coaxial subtract constraints."
diff --git a/Aetheris.Firmament.FrictionLab/Cases/mounting-bracket-basic/review.toon b/Aetheris.Firmament.FrictionLab/Cases/mounting-bracket-basic/review.toon
index dc1a0c08..ee59bdeb 100644
--- a/Aetheris.Firmament.FrictionLab/Cases/mounting-bracket-basic/review.toon
+++ b/Aetheris.Firmament.FrictionLab/Cases/mounting-bracket-basic/review.toon
@@ -8,3 +8,8 @@ proposed_features[2]:
- "Robust add/union support for simple multi-box bracket construction."
- "Face/axis placement primitives for hole positioning."
reviewer_verdict: "Intent is clear but blocked by union limitations, so only partial authoring confidence."
+previous_status: partial
+current_status: partial
+changed: yes
+blocker_class: improved_but_still_blocked
+change_note: "F1 union now gets the bracket add farther; blocker moved to subtract-family composition from the new bracket root."
diff --git a/Aetheris.Firmament.FrictionLab/Cases/pocketed-plate/review.toon b/Aetheris.Firmament.FrictionLab/Cases/pocketed-plate/review.toon
index b9fff876..0212cf41 100644
--- a/Aetheris.Firmament.FrictionLab/Cases/pocketed-plate/review.toon
+++ b/Aetheris.Firmament.FrictionLab/Cases/pocketed-plate/review.toon
@@ -8,3 +8,8 @@ proposed_features[2]:
- "Pocket primitive with profile + depth definition."
- "Feature references for top-face anchored cuts."
reviewer_verdict: "Plate pocket is expressible only as primitive abuse; semantics are missing."
+previous_status: partial
+current_status: partial
+changed: no
+blocker_class: unchanged_kernel_blocker
+blocker_remaining: "Box-minus-box pocket result still cannot be represented in current subtract rebuild model."
diff --git a/Aetheris.Firmament.FrictionLab/Cases/ribbed-support/review.toon b/Aetheris.Firmament.FrictionLab/Cases/ribbed-support/review.toon
index b3737773..c8696761 100644
--- a/Aetheris.Firmament.FrictionLab/Cases/ribbed-support/review.toon
+++ b/Aetheris.Firmament.FrictionLab/Cases/ribbed-support/review.toon
@@ -1,5 +1,5 @@
case_id: ribbed-support
-possible: false
+possible: partial
awkwardness: high
pain_points[2]:
- "Thin rib authoring would require brute-force repeated adds with fragile dimensions."
@@ -7,4 +7,9 @@ pain_points[2]:
proposed_features[2]:
- "Rib feature with thickness, draft, and anchor references."
- "Stable additive union support for connected support geometry."
-reviewer_verdict: "Stopped per anti-pretzel rule: rib modeling is not cleanly expressible in current surface area."
+reviewer_verdict: "Support wall now exports; true multi-rib intent is still awkward without dedicated rib semantics."
+previous_status: failure
+current_status: partial
+changed: yes
+blocker_class: improved_but_still_blocked
+change_note: "F1 bounded union unblocked the baseline wall add, but ergonomic rib authoring remains weak."
diff --git a/Aetheris.Firmament.FrictionLab/Cases/shaft-keyway/review.toon b/Aetheris.Firmament.FrictionLab/Cases/shaft-keyway/review.toon
index f83a4815..a875bb78 100644
--- a/Aetheris.Firmament.FrictionLab/Cases/shaft-keyway/review.toon
+++ b/Aetheris.Firmament.FrictionLab/Cases/shaft-keyway/review.toon
@@ -8,3 +8,8 @@ proposed_features[2]:
- "Axis-aligned slot primitive for shafts."
- "Reference constraints against cylindrical faces/axes."
reviewer_verdict: "Possible with existing primitives, but alignment readability is weaker than desired."
+previous_status: failure
+current_status: failure
+changed: no
+blocker_class: unchanged_kernel_blocker
+blocker_remaining: "Shaft keyway subtract remains outside safe subtract composition support for bounded cylinder roots."
diff --git a/Aetheris.Firmament.FrictionLab/Cases/simple-bracket/review.toon b/Aetheris.Firmament.FrictionLab/Cases/simple-bracket/review.toon
index a1605965..e0e4ec21 100644
--- a/Aetheris.Firmament.FrictionLab/Cases/simple-bracket/review.toon
+++ b/Aetheris.Firmament.FrictionLab/Cases/simple-bracket/review.toon
@@ -7,3 +7,8 @@ pain_points[2]:
proposed_features[1]:
- "Expand boolean add execution beyond single-box union rebuild constraints."
reviewer_verdict: "Stopped intentionally; recorded friction instead of forcing workaround geometry."
+previous_status: partial
+current_status: partial
+changed: no
+blocker_class: unchanged_kernel_blocker
+blocker_remaining: "Second additive union step still fails rebuild constraints for multi-box bracket completion."
diff --git a/Aetheris.Firmament.FrictionLab/Harness/FrictionLabRunner.cs b/Aetheris.Firmament.FrictionLab/Harness/FrictionLabRunner.cs
index 87569980..cf2beee0 100644
--- a/Aetheris.Firmament.FrictionLab/Harness/FrictionLabRunner.cs
+++ b/Aetheris.Firmament.FrictionLab/Harness/FrictionLabRunner.cs
@@ -12,30 +12,35 @@ internal sealed class FrictionLabRunner
WriteIndented = true
};
- public FrictionLabSummary Run()
+ public FrictionLabSummary Run(IReadOnlyList<string>? caseIds = null, string summaryFileName = "summary.json")
{
var paths = FrictionLabPaths.Resolve();
Directory.CreateDirectory(paths.ReportsDirectory);
Directory.CreateDirectory(paths.ArtifactsDirectory);
- var caseResults = DiscoverCaseDirectories(paths.CasesDirectory)
+ var caseResults = DiscoverCaseDirectories(paths.CasesDirectory, caseIds)
.Select(caseDirectory => RunCase(paths, caseDirectory))
.ToArray();
- var summaryPath = Path.Combine(paths.ReportsDirectory, "summary.json");
+ var summaryPath = Path.Combine(paths.ReportsDirectory, summaryFileName);
var summary = FrictionLabSummary.FromResults(caseResults, ToRepoRelativePath(paths.RepoRoot, summaryPath));
File.WriteAllText(summaryPath, JsonSerializer.Serialize(summary, JsonOptions), new UTF8Encoding(false));
return summary;
}
- private static IEnumerable<string> DiscoverCaseDirectories(string casesDirectory)
+ private static IEnumerable<string> DiscoverCaseDirectories(string casesDirectory, IReadOnlyList<string>? caseIds)
{
if (!Directory.Exists(casesDirectory))
{
return [];
}
+ if (caseIds is { Count: > 0 })
+ {
+ return caseIds.Select(caseId => Path.Combine(casesDirectory, caseId));
+ }
+
return Directory.GetDirectories(casesDirectory)
.OrderBy(path => path, StringComparer.Ordinal);
}
diff --git a/Aetheris.Firmament.FrictionLab/Program.cs b/Aetheris.Firmament.FrictionLab/Program.cs
index 7b57a559..299a9335 100644
--- a/Aetheris.Firmament.FrictionLab/Program.cs
+++ b/Aetheris.Firmament.FrictionLab/Program.cs
@@ -1,7 +1,41 @@
using Aetheris.Firmament.FrictionLab.Harness;
+var caseIds = ParseCaseIds(args);
+var summaryFileName = ParseSummaryFileName(args);
+
var runner = new FrictionLabRunner();
-var summary = runner.Run();
+var summary = runner.Run(caseIds, summaryFileName);
Console.WriteLine($"FrictionLab processed {summary.TotalCases} case(s): success={summary.SuccessCount}, partial={summary.PartialCount}, failure={summary.FailureCount}.");
Console.WriteLine($"Summary: {summary.SummaryPath}");
+
+static IReadOnlyList<string>? ParseCaseIds(string[] args)
+{
+ const string casesPrefix = "--cases=";
+ var casesArg = args.FirstOrDefault(arg => arg.StartsWith(casesPrefix, StringComparison.Ordinal));
+ if (string.IsNullOrWhiteSpace(casesArg))
+ {
+ return null;
+ }
+
+ var raw = casesArg[casesPrefix.Length..];
+ var caseIds = raw
+ .Split(',', StringSplitOptions.TrimEntries | StringSplitOptions.RemoveEmptyEntries)
+ .Distinct(StringComparer.Ordinal)
+ .ToArray();
+
+ return caseIds.Length == 0 ? null : caseIds;
+}
+
+static string ParseSummaryFileName(string[] args)
+{
+ const string summaryPrefix = "--summary=";
+ var summaryArg = args.FirstOrDefault(arg => arg.StartsWith(summaryPrefix, StringComparison.Ordinal));
+ if (string.IsNullOrWhiteSpace(summaryArg))
+ {
+ return "summary.json";
+ }
+
+ var fileName = summaryArg[summaryPrefix.Length..].Trim();
+ return string.IsNullOrWhiteSpace(fileName) ? "summary.json" : fileName;
+}
diff --git a/Aetheris.Firmament.FrictionLab/Reports/Artifacts/ribbed-support.step b/Aetheris.Firmament.FrictionLab/Reports/Artifacts/ribbed-support.step
new file mode 100644
index 00000000..9951f167
--- /dev/null
+++ b/Aetheris.Firmament.FrictionLab/Reports/Artifacts/ribbed-support.step
@@ -0,0 +1,556 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION(('Aetheris AP242 subset export'),'2;1');
+FILE_NAME('aetheris_export.step','1970-01-01T00:00:00',('Aetheris'),('Aetheris'),'Aetheris.Kernel','Aetheris.Kernel','');
+FILE_SCHEMA(('AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF'));
+ENDSEC;
+DATA;
+#1=CARTESIAN_POINT($,(-4,0,22));
+#2=DIRECTION($,(-1,0,0));
+#3=DIRECTION($,(0,1,0));
+#4=AXIS2_PLACEMENT_3D($,#1,#2,#3);
+#5=PLANE($,#4);
+#6=CARTESIAN_POINT($,(-4,-20,18));
+#7=VERTEX_POINT($,#6);
+#8=CARTESIAN_POINT($,(-4,-20,26));
+#9=VERTEX_POINT($,#8);
+#10=CARTESIAN_POINT($,(-4,-20,18));
+#11=DIRECTION($,(0,0,1));
+#12=VECTOR($,#11,1);
+#13=LINE($,#10,#12);
+#14=EDGE_CURVE($,#7,#9,#13,.T.);
+#15=ORIENTED_EDGE($,$,$,#14,.T.);
+#16=CARTESIAN_POINT($,(-4,20,26));
+#17=VERTEX_POINT($,#16);
+#18=CARTESIAN_POINT($,(-4,-20,26));
+#19=DIRECTION($,(0,1,0));
+#20=VECTOR($,#19,1);
+#21=LINE($,#18,#20);
+#22=EDGE_CURVE($,#9,#17,#21,.T.);
+#23=ORIENTED_EDGE($,$,$,#22,.T.);
+#24=CARTESIAN_POINT($,(-4,20,18));
+#25=VERTEX_POINT($,#24);
+#26=CARTESIAN_POINT($,(-4,20,26));
+#27=DIRECTION($,(0,0,1));
+#28=VECTOR($,#27,1);
+#29=LINE($,#26,#28);
+#30=EDGE_CURVE($,#17,#25,#29,.T.);
+#31=ORIENTED_EDGE($,$,$,#30,.F.);
+#32=CARTESIAN_POINT($,(-4,20,18));
+#33=DIRECTION($,(0,1,0));
+#34=VECTOR($,#33,1);
+#35=LINE($,#32,#34);
+#36=EDGE_CURVE($,#25,#7,#35,.T.);
+#37=ORIENTED_EDGE($,$,$,#36,.F.);
+#38=EDGE_LOOP($,(#15,#23,#31,#37));
+#39=FACE_OUTER_BOUND('',#38,.T.);
+#40=ADVANCED_FACE('',(#39),#5,.T.);
+#41=CARTESIAN_POINT($,(32,0,22));
+#42=DIRECTION($,(-1,0,0));
+#43=DIRECTION($,(0,1,0));
+#44=AXIS2_PLACEMENT_3D($,#41,#42,#43);
+#45=PLANE($,#44);
+#46=CARTESIAN_POINT($,(32,-20,4));
+#47=VERTEX_POINT($,#46);
+#48=CARTESIAN_POINT($,(32,-20,18));
+#49=VERTEX_POINT($,#48);
+#50=CARTESIAN_POINT($,(32,-20,4));
+#51=DIRECTION($,(0,0,1));
+#52=VECTOR($,#51,1);
+#53=LINE($,#50,#52);
+#54=EDGE_CURVE($,#47,#49,#53,.T.);
+#55=ORIENTED_EDGE($,$,$,#54,.T.);
+#56=CARTESIAN_POINT($,(32,20,18));
+#57=VERTEX_POINT($,#56);
+#58=CARTESIAN_POINT($,(32,-20,18));
+#59=DIRECTION($,(0,1,0));
+#60=VECTOR($,#59,1);
+#61=LINE($,#58,#60);
+#62=EDGE_CURVE($,#49,#57,#61,.T.);
+#63=ORIENTED_EDGE($,$,$,#62,.T.);
+#64=CARTESIAN_POINT($,(32,20,4));
+#65=VERTEX_POINT($,#64);
+#66=CARTESIAN_POINT($,(32,20,18));
+#67=DIRECTION($,(0,0,1));
+#68=VECTOR($,#67,1);
+#69=LINE($,#66,#68);
+#70=EDGE_CURVE($,#57,#65,#69,.T.);
+#71=ORIENTED_EDGE($,$,$,#70,.F.);
+#72=CARTESIAN_POINT($,(32,20,4));
+#73=DIRECTION($,(0,1,0));
+#74=VECTOR($,#73,1);
+#75=LINE($,#72,#74);
+#76=EDGE_CURVE($,#65,#47,#75,.T.);
+#77=ORIENTED_EDGE($,$,$,#76,.F.);
+#78=EDGE_LOOP($,(#55,#63,#71,#77));
+#79=FACE_OUTER_BOUND('',#78,.T.);
+#80=ADVANCED_FACE('',(#79),#45,.T.);
+#81=CARTESIAN_POINT($,(32,0,22));
+#82=DIRECTION($,(-1,0,0));
+#83=DIRECTION($,(0,1,0));
+#84=AXIS2_PLACEMENT_3D($,#81,#82,#83);
+#85=PLANE($,#84);
+#86=CARTESIAN_POINT($,(32,-20,26));
+#87=VERTEX_POINT($,#86);
+#88=CARTESIAN_POINT($,(32,-20,40));
+#89=VERTEX_POINT($,#88);
+#90=CARTESIAN_POINT($,(32,-20,26));
+#91=DIRECTION($,(0,0,1));
+#92=VECTOR($,#91,1);
+#93=LINE($,#90,#92);
+#94=EDGE_CURVE($,#87,#89,#93,.T.);
+#95=ORIENTED_EDGE($,$,$,#94,.T.);
+#96=CARTESIAN_POINT($,(32,20,40));
+#97=VERTEX_POINT($,#96);
+#98=CARTESIAN_POINT($,(32,-20,40));
+#99=DIRECTION($,(0,1,0));
+#100=VECTOR($,#99,1);
+#101=LINE($,#98,#100);
+#102=EDGE_CURVE($,#89,#97,#101,.T.);
+#103=ORIENTED_EDGE($,$,$,#102,.T.);
+#104=CARTESIAN_POINT($,(32,20,26));
+#105=VERTEX_POINT($,#104);
+#106=CARTESIAN_POINT($,(32,20,40));
+#107=DIRECTION($,(0,0,1));
+#108=VECTOR($,#107,1);
+#109=LINE($,#106,#108);
+#110=EDGE_CURVE($,#97,#105,#109,.T.);
+#111=ORIENTED_EDGE($,$,$,#110,.F.);
+#112=CARTESIAN_POINT($,(32,20,26));
+#113=DIRECTION($,(0,1,0));
+#114=VECTOR($,#113,1);
+#115=LINE($,#112,#114);
+#116=EDGE_CURVE($,#105,#87,#115,.T.);
+#117=ORIENTED_EDGE($,$,$,#116,.F.);
+#118=EDGE_LOOP($,(#95,#103,#111,#117));
+#119=FACE_OUTER_BOUND('',#118,.T.);
+#120=ADVANCED_FACE('',(#119),#85,.T.);
+#121=CARTESIAN_POINT($,(40,0,22));
+#122=DIRECTION($,(1,0,0));
+#123=DIRECTION($,(0,1,0));
+#124=AXIS2_PLACEMENT_3D($,#121,#122,#123);
+#125=PLANE($,#124);
+#126=CARTESIAN_POINT($,(40,-20,4));
+#127=VERTEX_POINT($,#126);
+#128=CARTESIAN_POINT($,(40,20,4));
+#129=VERTEX_POINT($,#128);
+#130=CARTESIAN_POINT($,(40,-20,4));
+#131=DIRECTION($,(0,1,0));
+#132=VECTOR($,#131,1);
+#133=LINE($,#130,#132);
+#134=EDGE_CURVE($,#127,#129,#133,.T.);
+#135=ORIENTED_EDGE($,$,$,#134,.T.);
+#136=CARTESIAN_POINT($,(40,20,18));
+#137=VERTEX_POINT($,#136);
+#138=CARTESIAN_POINT($,(40,20,4));
+#139=DIRECTION($,(0,0,1));
+#140=VECTOR($,#139,1);
+#141=LINE($,#138,#140);
+#142=EDGE_CURVE($,#129,#137,#141,.T.);
+#143=ORIENTED_EDGE($,$,$,#142,.T.);
+#144=CARTESIAN_POINT($,(40,-20,18));
+#145=VERTEX_POINT($,#144);
+#146=CARTESIAN_POINT($,(40,20,18));
+#147=DIRECTION($,(0,1,0));
+#148=VECTOR($,#147,1);
+#149=LINE($,#146,#148);
+#150=EDGE_CURVE($,#137,#145,#149,.T.);
+#151=ORIENTED_EDGE($,$,$,#150,.F.);
+#152=CARTESIAN_POINT($,(40,-20,18));
+#153=DIRECTION($,(0,0,1));
+#154=VECTOR($,#153,1);
+#155=LINE($,#152,#154);
+#156=EDGE_CURVE($,#145,#127,#155,.T.);
+#157=ORIENTED_EDGE($,$,$,#156,.F.);
+#158=EDGE_LOOP($,(#135,#143,#151,#157));
+#159=FACE_OUTER_BOUND('',#158,.T.);
+#160=ADVANCED_FACE('',(#159),#125,.T.);
+#161=CARTESIAN_POINT($,(40,0,22));
+#162=DIRECTION($,(1,0,0));
+#163=DIRECTION($,(0,1,0));
+#164=AXIS2_PLACEMENT_3D($,#161,#162,#163);
+#165=PLANE($,#164);
+#166=CARTESIAN_POINT($,(40,-20,26));
+#167=VERTEX_POINT($,#166);
+#168=CARTESIAN_POINT($,(40,20,26));
+#169=VERTEX_POINT($,#168);
+#170=CARTESIAN_POINT($,(40,-20,26));
+#171=DIRECTION($,(0,1,0));
+#172=VECTOR($,#171,1);
+#173=LINE($,#170,#172);
+#174=EDGE_CURVE($,#167,#169,#173,.T.);
+#175=ORIENTED_EDGE($,$,$,#174,.T.);
+#176=CARTESIAN_POINT($,(40,20,40));
+#177=VERTEX_POINT($,#176);
+#178=CARTESIAN_POINT($,(40,20,26));
+#179=DIRECTION($,(0,0,1));
+#180=VECTOR($,#179,1);
+#181=LINE($,#178,#180);
+#182=EDGE_CURVE($,#169,#177,#181,.T.);
+#183=ORIENTED_EDGE($,$,$,#182,.T.);
+#184=CARTESIAN_POINT($,(40,-20,40));
+#185=VERTEX_POINT($,#184);
+#186=CARTESIAN_POINT($,(40,20,40));
+#187=DIRECTION($,(0,1,0));
+#188=VECTOR($,#187,1);
+#189=LINE($,#186,#188);
+#190=EDGE_CURVE($,#177,#185,#189,.T.);
+#191=ORIENTED_EDGE($,$,$,#190,.F.);
+#192=CARTESIAN_POINT($,(40,-20,40));
+#193=DIRECTION($,(0,0,1));
+#194=VECTOR($,#193,1);
+#195=LINE($,#192,#194);
+#196=EDGE_CURVE($,#185,#167,#195,.T.);
+#197=ORIENTED_EDGE($,$,$,#196,.F.);
+#198=EDGE_LOOP($,(#175,#183,#191,#197));
+#199=FACE_OUTER_BOUND('',#198,.T.);
+#200=ADVANCED_FACE('',(#199),#165,.T.);
+#201=CARTESIAN_POINT($,(76,0,22));
+#202=DIRECTION($,(1,0,0));
+#203=DIRECTION($,(0,1,0));
+#204=AXIS2_PLACEMENT_3D($,#201,#202,#203);
+#205=PLANE($,#204);
+#206=CARTESIAN_POINT($,(76,-20,18));
+#207=VERTEX_POINT($,#206);
+#208=CARTESIAN_POINT($,(76,20,18));
+#209=VERTEX_POINT($,#208);
+#210=CARTESIAN_POINT($,(76,-20,18));
+#211=DIRECTION($,(0,1,0));
+#212=VECTOR($,#211,1);
+#213=LINE($,#210,#212);
+#214=EDGE_CURVE($,#207,#209,#213,.T.);
+#215=ORIENTED_EDGE($,$,$,#214,.T.);
+#216=CARTESIAN_POINT($,(76,20,26));
+#217=VERTEX_POINT($,#216);
+#218=CARTESIAN_POINT($,(76,20,18));
+#219=DIRECTION($,(0,0,1));
+#220=VECTOR($,#219,1);
+#221=LINE($,#218,#220);
+#222=EDGE_CURVE($,#209,#217,#221,.T.);
+#223=ORIENTED_EDGE($,$,$,#222,.T.);
+#224=CARTESIAN_POINT($,(76,-20,26));
+#225=VERTEX_POINT($,#224);
+#226=CARTESIAN_POINT($,(76,20,26));
+#227=DIRECTION($,(0,1,0));
+#228=VECTOR($,#227,1);
+#229=LINE($,#226,#228);
+#230=EDGE_CURVE($,#217,#225,#229,.T.);
+#231=ORIENTED_EDGE($,$,$,#230,.F.);
+#232=CARTESIAN_POINT($,(76,-20,26));
+#233=DIRECTION($,(0,0,1));
+#234=VECTOR($,#233,1);
+#235=LINE($,#232,#234);
+#236=EDGE_CURVE($,#225,#207,#235,.T.);
+#237=ORIENTED_EDGE($,$,$,#236,.F.);
+#238=EDGE_LOOP($,(#215,#223,#231,#237));
+#239=FACE_OUTER_BOUND('',#238,.T.);
+#240=ADVANCED_FACE('',(#239),#205,.T.);
+#241=CARTESIAN_POINT($,(36,-20,22));
+#242=DIRECTION($,(0,-1,0));
+#243=DIRECTION($,(1,0,0));
+#244=AXIS2_PLACEMENT_3D($,#241,#242,#243);
+#245=PLANE($,#244);
+#246=CARTESIAN_POINT($,(-4,-20,18));
+#247=DIRECTION($,(1,0,0));
+#248=VECTOR($,#247,1);
+#249=LINE($,#246,#248);
+#250=EDGE_CURVE($,#7,#49,#249,.T.);
+#251=ORIENTED_EDGE($,$,$,#250,.T.);
+#252=CARTESIAN_POINT($,(32,-20,18));
+#253=DIRECTION($,(0,0,1));
+#254=VECTOR($,#253,1);
+#255=LINE($,#252,#254);
+#256=EDGE_CURVE($,#49,#87,#255,.T.);
+#257=ORIENTED_EDGE($,$,$,#256,.T.);
+#258=CARTESIAN_POINT($,(32,-20,26));
+#259=DIRECTION($,(1,0,0));
+#260=VECTOR($,#259,1);
+#261=LINE($,#258,#260);
+#262=EDGE_CURVE($,#87,#9,#261,.T.);
+#263=ORIENTED_EDGE($,$,$,#262,.F.);
+#264=ORIENTED_EDGE($,$,$,#14,.F.);
+#265=EDGE_LOOP($,(#251,#257,#263,#264));
+#266=FACE_OUTER_BOUND('',#265,.T.);
+#267=ADVANCED_FACE('',(#266),#245,.T.);
+#268=CARTESIAN_POINT($,(36,-20,22));
+#269=DIRECTION($,(0,-1,0));
+#270=DIRECTION($,(1,0,0));
+#271=AXIS2_PLACEMENT_3D($,#268,#269,#270);
+#272=PLANE($,#271);
+#273=CARTESIAN_POINT($,(32,-20,4));
+#274=DIRECTION($,(1,0,0));
+#275=VECTOR($,#274,1);
+#276=LINE($,#273,#275);
+#277=EDGE_CURVE($,#47,#127,#276,.T.);
+#278=ORIENTED_EDGE($,$,$,#277,.T.);
+#279=ORIENTED_EDGE($,$,$,#156,.T.);
+#280=CARTESIAN_POINT($,(40,-20,18));
+#281=DIRECTION($,(1,0,0));
+#282=VECTOR($,#281,1);
+#283=LINE($,#280,#282);
+#284=EDGE_CURVE($,#145,#49,#283,.T.);
+#285=ORIENTED_EDGE($,$,$,#284,.F.);
+#286=ORIENTED_EDGE($,$,$,#54,.F.);
+#287=EDGE_LOOP($,(#278,#279,#285,#286));
+#288=FACE_OUTER_BOUND('',#287,.T.);
+#289=ADVANCED_FACE('',(#288),#272,.T.);
+#290=CARTESIAN_POINT($,(36,-20,22));
+#291=DIRECTION($,(0,-1,0));
+#292=DIRECTION($,(1,0,0));
+#293=AXIS2_PLACEMENT_3D($,#290,#291,#292);
+#294=PLANE($,#293);
+#295=ORIENTED_EDGE($,$,$,#284,.T.);
+#296=CARTESIAN_POINT($,(40,-20,18));
+#297=DIRECTION($,(0,0,1));
+#298=VECTOR($,#297,1);
+#299=LINE($,#296,#298);
+#300=EDGE_CURVE($,#145,#167,#299,.T.);
+#301=ORIENTED_EDGE($,$,$,#300,.T.);
+#302=CARTESIAN_POINT($,(40,-20,26));
+#303=DIRECTION($,(1,0,0));
+#304=VECTOR($,#303,1);
+#305=LINE($,#302,#304);
+#306=EDGE_CURVE($,#167,#87,#305,.T.);
+#307=ORIENTED_EDGE($,$,$,#306,.F.);
+#308=ORIENTED_EDGE($,$,$,#256,.F.);
+#309=EDGE_LOOP($,(#295,#301,#307,#308));
+#310=FACE_OUTER_BOUND('',#309,.T.);
+#311=ADVANCED_FACE('',(#310),#294,.T.);
+#312=CARTESIAN_POINT($,(36,-20,22));
+#313=DIRECTION($,(0,-1,0));
+#314=DIRECTION($,(1,0,0));
+#315=AXIS2_PLACEMENT_3D($,#312,#313,#314);
+#316=PLANE($,#315);
+#317=ORIENTED_EDGE($,$,$,#306,.T.);
+#318=ORIENTED_EDGE($,$,$,#196,.T.);
+#319=CARTESIAN_POINT($,(40,-20,40));
+#320=DIRECTION($,(1,0,0));
+#321=VECTOR($,#320,1);
+#322=LINE($,#319,#321);
+#323=EDGE_CURVE($,#185,#89,#322,.T.);
+#324=ORIENTED_EDGE($,$,$,#323,.F.);
+#325=ORIENTED_EDGE($,$,$,#94,.F.);
+#326=EDGE_LOOP($,(#317,#318,#324,#325));
+#327=FACE_OUTER_BOUND('',#326,.T.);
+#328=ADVANCED_FACE('',(#327),#316,.T.);
+#329=CARTESIAN_POINT($,(36,-20,22));
+#330=DIRECTION($,(0,-1,0));
+#331=DIRECTION($,(1,0,0));
+#332=AXIS2_PLACEMENT_3D($,#329,#330,#331);
+#333=PLANE($,#332);
+#334=CARTESIAN_POINT($,(40,-20,18));
+#335=DIRECTION($,(1,0,0));
+#336=VECTOR($,#335,1);
+#337=LINE($,#334,#336);
+#338=EDGE_CURVE($,#145,#207,#337,.T.);
+#339=ORIENTED_EDGE($,$,$,#338,.T.);
+#340=ORIENTED_EDGE($,$,$,#236,.T.);
+#341=CARTESIAN_POINT($,(76,-20,26));
+#342=DIRECTION($,(1,0,0));
+#343=VECTOR($,#342,1);
+#344=LINE($,#341,#343);
+#345=EDGE_CURVE($,#225,#167,#344,.T.);
+#346=ORIENTED_EDGE($,$,$,#345,.F.);
+#347=ORIENTED_EDGE($,$,$,#300,.F.);
+#348=EDGE_LOOP($,(#339,#340,#346,#347));
+#349=FACE_OUTER_BOUND('',#348,.T.);
+#350=ADVANCED_FACE('',(#349),#333,.T.);
+#351=CARTESIAN_POINT($,(36,20,22));
+#352=DIRECTION($,(0,1,0));
+#353=DIRECTION($,(-1,0,0));
+#354=AXIS2_PLACEMENT_3D($,#351,#352,#353);
+#355=PLANE($,#354);
+#356=ORIENTED_EDGE($,$,$,#30,.T.);
+#357=CARTESIAN_POINT($,(-4,20,26));
+#358=DIRECTION($,(1,0,0));
+#359=VECTOR($,#358,1);
+#360=LINE($,#357,#359);
+#361=EDGE_CURVE($,#17,#105,#360,.T.);
+#362=ORIENTED_EDGE($,$,$,#361,.T.);
+#363=CARTESIAN_POINT($,(32,20,26));
+#364=DIRECTION($,(0,0,1));
+#365=VECTOR($,#364,1);
+#366=LINE($,#363,#365);
+#367=EDGE_CURVE($,#105,#57,#366,.T.);
+#368=ORIENTED_EDGE($,$,$,#367,.F.);
+#369=CARTESIAN_POINT($,(32,20,18));
+#370=DIRECTION($,(1,0,0));
+#371=VECTOR($,#370,1);
+#372=LINE($,#369,#371);
+#373=EDGE_CURVE($,#57,#25,#372,.T.);
+#374=ORIENTED_EDGE($,$,$,#373,.F.);
+#375=EDGE_LOOP($,(#356,#362,#368,#374));
+#376=FACE_OUTER_BOUND('',#375,.T.);
+#377=ADVANCED_FACE('',(#376),#355,.T.);
+#378=CARTESIAN_POINT($,(36,20,22));
+#379=DIRECTION($,(0,1,0));
+#380=DIRECTION($,(-1,0,0));
+#381=AXIS2_PLACEMENT_3D($,#378,#379,#380);
+#382=PLANE($,#381);
+#383=ORIENTED_EDGE($,$,$,#70,.T.);
+#384=CARTESIAN_POINT($,(32,20,18));
+#385=DIRECTION($,(1,0,0));
+#386=VECTOR($,#385,1);
+#387=LINE($,#384,#386);
+#388=EDGE_CURVE($,#57,#137,#387,.T.);
+#389=ORIENTED_EDGE($,$,$,#388,.T.);
+#390=ORIENTED_EDGE($,$,$,#142,.F.);
+#391=CARTESIAN_POINT($,(40,20,4));
+#392=DIRECTION($,(1,0,0));
+#393=VECTOR($,#392,1);
+#394=LINE($,#391,#393);
+#395=EDGE_CURVE($,#129,#65,#394,.T.);
+#396=ORIENTED_EDGE($,$,$,#395,.F.);
+#397=EDGE_LOOP($,(#383,#389,#390,#396));
+#398=FACE_OUTER_BOUND('',#397,.T.);
+#399=ADVANCED_FACE('',(#398),#382,.T.);
+#400=CARTESIAN_POINT($,(36,20,22));
+#401=DIRECTION($,(0,1,0));
+#402=DIRECTION($,(-1,0,0));
+#403=AXIS2_PLACEMENT_3D($,#400,#401,#402);
+#404=PLANE($,#403);
+#405=ORIENTED_EDGE($,$,$,#367,.T.);
+#406=CARTESIAN_POINT($,(32,20,26));
+#407=DIRECTION($,(1,0,0));
+#408=VECTOR($,#407,1);
+#409=LINE($,#406,#408);
+#410=EDGE_CURVE($,#105,#169,#409,.T.);
+#411=ORIENTED_EDGE($,$,$,#410,.T.);
+#412=CARTESIAN_POINT($,(40,20,26));
+#413=DIRECTION($,(0,0,1));
+#414=VECTOR($,#413,1);
+#415=LINE($,#412,#414);
+#416=EDGE_CURVE($,#169,#137,#415,.T.);
+#417=ORIENTED_EDGE($,$,$,#416,.F.);
+#418=ORIENTED_EDGE($,$,$,#388,.F.);
+#419=EDGE_LOOP($,(#405,#411,#417,#418));
+#420=FACE_OUTER_BOUND('',#419,.T.);
+#421=ADVANCED_FACE('',(#420),#404,.T.);
+#422=CARTESIAN_POINT($,(36,20,22));
+#423=DIRECTION($,(0,1,0));
+#424=DIRECTION($,(-1,0,0));
+#425=AXIS2_PLACEMENT_3D($,#422,#423,#424);
+#426=PLANE($,#425);
+#427=ORIENTED_EDGE($,$,$,#110,.T.);
+#428=CARTESIAN_POINT($,(32,20,40));
+#429=DIRECTION($,(1,0,0));
+#430=VECTOR($,#429,1);
+#431=LINE($,#428,#430);
+#432=EDGE_CURVE($,#97,#177,#431,.T.);
+#433=ORIENTED_EDGE($,$,$,#432,.T.);
+#434=ORIENTED_EDGE($,$,$,#182,.F.);
+#435=ORIENTED_EDGE($,$,$,#410,.F.);
+#436=EDGE_LOOP($,(#427,#433,#434,#435));
+#437=FACE_OUTER_BOUND('',#436,.T.);
+#438=ADVANCED_FACE('',(#437),#426,.T.);
+#439=CARTESIAN_POINT($,(36,20,22));
+#440=DIRECTION($,(0,1,0));
+#441=DIRECTION($,(-1,0,0));
+#442=AXIS2_PLACEMENT_3D($,#439,#440,#441);
+#443=PLANE($,#442);
+#444=ORIENTED_EDGE($,$,$,#416,.T.);
+#445=CARTESIAN_POINT($,(40,20,26));
+#446=DIRECTION($,(1,0,0));
+#447=VECTOR($,#446,1);
+#448=LINE($,#445,#447);
+#449=EDGE_CURVE($,#169,#217,#448,.T.);
+#450=ORIENTED_EDGE($,$,$,#449,.T.);
+#451=ORIENTED_EDGE($,$,$,#222,.F.);
+#452=CARTESIAN_POINT($,(76,20,18));
+#453=DIRECTION($,(1,0,0));
+#454=VECTOR($,#453,1);
+#455=LINE($,#452,#454);
+#456=EDGE_CURVE($,#209,#137,#455,.T.);
+#457=ORIENTED_EDGE($,$,$,#456,.F.);
+#458=EDGE_LOOP($,(#444,#450,#451,#457));
+#459=FACE_OUTER_BOUND('',#458,.T.);
+#460=ADVANCED_FACE('',(#459),#443,.T.);
+#461=CARTESIAN_POINT($,(36,0,4));
+#462=DIRECTION($,(0,0,-1));
+#463=DIRECTION($,(1,0,0));
+#464=AXIS2_PLACEMENT_3D($,#461,#462,#463);
+#465=PLANE($,#464);
+#466=ORIENTED_EDGE($,$,$,#76,.T.);
+#467=ORIENTED_EDGE($,$,$,#395,.T.);
+#468=ORIENTED_EDGE($,$,$,#134,.F.);
+#469=ORIENTED_EDGE($,$,$,#277,.F.);
+#470=EDGE_LOOP($,(#466,#467,#468,#469));
+#471=FACE_OUTER_BOUND('',#470,.T.);
+#472=ADVANCED_FACE('',(#471),#465,.T.);
+#473=CARTESIAN_POINT($,(36,0,18));
+#474=DIRECTION($,(0,0,-1));
+#475=DIRECTION($,(1,0,0));
+#476=AXIS2_PLACEMENT_3D($,#473,#474,#475);
+#477=PLANE($,#476);
+#478=ORIENTED_EDGE($,$,$,#36,.T.);
+#479=ORIENTED_EDGE($,$,$,#373,.T.);
+#480=ORIENTED_EDGE($,$,$,#62,.F.);
+#481=ORIENTED_EDGE($,$,$,#250,.F.);
+#482=EDGE_LOOP($,(#478,#479,#480,#481));
+#483=FACE_OUTER_BOUND('',#482,.T.);
+#484=ADVANCED_FACE('',(#483),#477,.T.);
+#485=CARTESIAN_POINT($,(36,0,18));
+#486=DIRECTION($,(0,0,-1));
+#487=DIRECTION($,(1,0,0));
+#488=AXIS2_PLACEMENT_3D($,#485,#486,#487);
+#489=PLANE($,#488);
+#490=ORIENTED_EDGE($,$,$,#150,.T.);
+#491=ORIENTED_EDGE($,$,$,#456,.T.);
+#492=ORIENTED_EDGE($,$,$,#214,.F.);
+#493=ORIENTED_EDGE($,$,$,#338,.F.);
+#494=EDGE_LOOP($,(#490,#491,#492,#493));
+#495=FACE_OUTER_BOUND('',#494,.T.);
+#496=ADVANCED_FACE('',(#495),#489,.T.);
+#497=CARTESIAN_POINT($,(36,0,26));
+#498=DIRECTION($,(0,0,1));
+#499=DIRECTION($,(1,0,0));
+#500=AXIS2_PLACEMENT_3D($,#497,#498,#499);
+#501=PLANE($,#500);
+#502=ORIENTED_EDGE($,$,$,#262,.T.);
+#503=ORIENTED_EDGE($,$,$,#116,.T.);
+#504=ORIENTED_EDGE($,$,$,#361,.F.);
+#505=ORIENTED_EDGE($,$,$,#22,.F.);
+#506=EDGE_LOOP($,(#502,#503,#504,#505));
+#507=FACE_OUTER_BOUND('',#506,.T.);
+#508=ADVANCED_FACE('',(#507),#501,.T.);
+#509=CARTESIAN_POINT($,(36,0,26));
+#510=DIRECTION($,(0,0,1));
+#511=DIRECTION($,(1,0,0));
+#512=AXIS2_PLACEMENT_3D($,#509,#510,#511);
+#513=PLANE($,#512);
+#514=ORIENTED_EDGE($,$,$,#345,.T.);
+#515=ORIENTED_EDGE($,$,$,#230,.T.);
+#516=ORIENTED_EDGE($,$,$,#449,.F.);
+#517=ORIENTED_EDGE($,$,$,#174,.F.);
+#518=EDGE_LOOP($,(#514,#515,#516,#517));
+#519=FACE_OUTER_BOUND('',#518,.T.);
+#520=ADVANCED_FACE('',(#519),#513,.T.);
+#521=CARTESIAN_POINT($,(36,0,40));
+#522=DIRECTION($,(0,0,1));
+#523=DIRECTION($,(1,0,0));
+#524=AXIS2_PLACEMENT_3D($,#521,#522,#523);
+#525=PLANE($,#524);
+#526=ORIENTED_EDGE($,$,$,#323,.T.);
+#527=ORIENTED_EDGE($,$,$,#190,.T.);
+#528=ORIENTED_EDGE($,$,$,#432,.F.);
+#529=ORIENTED_EDGE($,$,$,#102,.F.);
+#530=EDGE_LOOP($,(#526,#527,#528,#529));
+#531=FACE_OUTER_BOUND('',#530,.T.);
+#532=ADVANCED_FACE('',(#531),#525,.T.);
+#533=CLOSED_SHELL($,(#40,#80,#120,#160,#200,#240,#267,#289,#311,#328,#350,#377,#399,#421,#438,#460,#472,#484,#496,#508,#520,#532));
+#534=MANIFOLD_SOLID_BREP('AetherisBody',#533);
+#535=APPLICATION_CONTEXT('mechanical design');
+#536=PRODUCT_CONTEXT('',#535,'mechanical');
+#537=PRODUCT('AETHERIS','AetherisBody','',(#536));
+#538=PRODUCT_DEFINITION_FORMATION('','',#537);
+#539=PRODUCT_DEFINITION_CONTEXT('design',#535,'design');
+#540=PRODUCT_DEFINITION('','',#538,#539);
+#541=PRODUCT_DEFINITION_SHAPE('','',#540);
+#542=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
+#543=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
+#544=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
+#545=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNIT_ASSIGNED_CONTEXT((#542,#543,#544))REPRESENTATION_CONTEXT('3','3D'));
+#546=SHAPE_REPRESENTATION('AetherisBody',(#534),#545);
+#547=SHAPE_DEFINITION_REPRESENTATION(#541,#546);
+ENDSEC;
+END-ISO-10303-21;
diff --git a/Aetheris.Firmament.FrictionLab/Reports/fl2a-run.json b/Aetheris.Firmament.FrictionLab/Reports/fl2a-run.json
new file mode 100644
index 00000000..f0a8fad4
--- /dev/null
+++ b/Aetheris.Firmament.FrictionLab/Reports/fl2a-run.json
@@ -0,0 +1,172 @@
+{
+ "totalCases": 8,
+ "successCount": 0,
+ "partialCount": 6,
+ "failureCount": 2,
+ "caseResults": [
+ {
+ "caseId": "mounting-bracket-basic",
+ "buildStatus": "partial",
+ "artifactPresent": false,
+ "stepArtifactPath": null,
+ "possible": "partial",
+ "awkwardness": "high",
+ "diagnostics": [
+ {
+ "code": "NotImplemented",
+ "severity": "Error",
+ "message": "Requested boolean feature \u0027base_hole\u0027 (subtract) could not be executed.",
+ "source": "firmament"
+ },
+ {
+ "code": "ValidationFailed",
+ "severity": "Error",
+ "message": "Boolean feature \u0027base_hole\u0027 (subtract) cannot re-enter the safe subtract family from \u0027bracket\u0027. Safe-hole composition may start only from a bounded box/cylinder root or continue from a previously validated safe subtract result.",
+ "source": "firmament.feature-graph.invalid-composition-order"
+ }
+ ]
+ },
+ {
+ "caseId": "simple-bracket",
+ "buildStatus": "partial",
+ "artifactPresent": false,
+ "stepArtifactPath": null,
+ "possible": "partial",
+ "awkwardness": "high",
+ "diagnostics": [
+ {
+ "code": "NotImplemented",
+ "severity": "Error",
+ "message": "Requested boolean feature \u0027bracket\u0027 (add) could not be executed.",
+ "source": "firmament"
+ },
+ {
+ "code": "NotImplemented",
+ "severity": "Error",
+ "message": "Boolean feature \u0027bracket\u0027 (add): Boolean Union: M13 only supports recognized axis-aligned boxes from BrepPrimitives.CreateBox(...).",
+ "source": "BrepBoolean.RebuildResult"
+ }
+ ]
+ },
+ {
+ "caseId": "ribbed-support",
+ "buildStatus": "partial",
+ "artifactPresent": true,
+ "stepArtifactPath": "Aetheris.Firmament.FrictionLab/Reports/Artifacts/ribbed-support.step",
+ "possible": "partial",
+ "awkwardness": "high",
+ "diagnostics": []
+ },
+ {
+ "caseId": "flange-bolt-circle",
+ "buildStatus": "failure",
+ "artifactPresent": false,
+ "stepArtifactPath": null,
+ "possible": "true",
+ "awkwardness": "medium",
+ "diagnostics": [
+ {
+ "code": "NotImplemented",
+ "severity": "Error",
+ "message": "Requested boolean feature \u0027bolt_0\u0027 (subtract) could not be executed.",
+ "source": "firmament"
+ },
+ {
+ "code": "NotImplemented",
+ "severity": "Error",
+ "message": "Boolean feature \u0027bolt_0\u0027 (subtract) cannot append another coaxial center bore in the bounded cylinder-root safe family.",
+ "source": "BrepBoolean.AnalyticHole.HoleInterference"
+ }
+ ]
+ },
+ {
+ "caseId": "blind-hole-mount-block",
+ "buildStatus": "partial",
+ "artifactPresent": false,
+ "stepArtifactPath": null,
+ "possible": "partial",
+ "awkwardness": "medium",
+ "diagnostics": [
+ {
+ "code": "NotImplemented",
+ "severity": "Error",
+ "message": "Requested boolean feature \u0027blind_hole\u0027 (subtract) could not be executed.",
+ "source": "firmament"
+ },
+ {
+ "code": "NotImplemented",
+ "severity": "Error",
+ "message": "Boolean feature \u0027blind_hole\u0027 (subtract) does not match the supported subtract span family; only through-holes or one-sided blind holes are allowed in this milestone.",
+ "source": "BrepBoolean.AnalyticHole.NotFullySpanning"
+ }
+ ]
+ },
+ {
+ "caseId": "counterbore-hole",
+ "buildStatus": "partial",
+ "artifactPresent": false,
+ "stepArtifactPath": null,
+ "possible": "partial",
+ "awkwardness": "high",
+ "diagnostics": [
+ {
+ "code": "NotImplemented",
+ "severity": "Error",
+ "message": "Requested boolean feature \u0027counterbore_pocket\u0027 (subtract) could not be executed.",
+ "source": "firmament"
+ },
+ {
+ "code": "NotImplemented",
+ "severity": "Error",
+ "message": "Boolean feature \u0027counterbore_pocket\u0027 (subtract) does not match the supported subtract span family; only through-holes or one-sided blind holes are allowed in this milestone.",
+ "source": "BrepBoolean.AnalyticHole.NotFullySpanning"
+ }
+ ]
+ },
+ {
+ "caseId": "pocketed-plate",
+ "buildStatus": "partial",
+ "artifactPresent": false,
+ "stepArtifactPath": null,
+ "possible": "partial",
+ "awkwardness": "medium",
+ "diagnostics": [
+ {
+ "code": "NotImplemented",
+ "severity": "Error",
+ "message": "Requested boolean feature \u0027pocket\u0027 (subtract) could not be executed.",
+ "source": "firmament"
+ },
+ {
+ "code": "NotImplemented",
+ "severity": "Error",
+ "message": "Boolean feature \u0027pocket\u0027 (subtract): Boolean Subtract: box subtraction result is not representable as a single box in M13.",
+ "source": "BrepBoolean.RebuildResult"
+ }
+ ]
+ },
+ {
+ "caseId": "shaft-keyway",
+ "buildStatus": "failure",
+ "artifactPresent": false,
+ "stepArtifactPath": null,
+ "possible": "true",
+ "awkwardness": "medium",
+ "diagnostics": [
+ {
+ "code": "NotImplemented",
+ "severity": "Error",
+ "message": "Requested boolean feature \u0027keyway\u0027 (subtract) could not be executed.",
+ "source": "firmament"
+ },
+ {
+ "code": "NotImplemented",
+ "severity": "Error",
+ "message": "Boolean feature \u0027keyway\u0027 (subtract): Boolean Subtract: sequential safe composition only supports subtracting supported analytic holes from the current bounded safe root family.",
+ "source": "BrepBoolean.RebuildResult"
+ }
+ ]
+ }
+ ],
+ "summaryPath": "Aetheris.Firmament.FrictionLab/Reports/fl2a-run.json"
+}
\ No newline at end of file
diff --git a/Aetheris.Firmament.FrictionLab/Reports/fl2a-summary.json b/Aetheris.Firmament.FrictionLab/Reports/fl2a-summary.json
new file mode 100644
index 00000000..0ecf7c12
--- /dev/null
+++ b/Aetheris.Firmament.FrictionLab/Reports/fl2a-summary.json
@@ -0,0 +1,144 @@
+{
+ "milestone": "FL2a",
+ "description": "Targeted rerun of affected Firmament friction cases after F1/F2/F3/P1/P2 changes.",
+ "rerun_case_count": 8,
+ "source_previous_summary": "Aetheris.Firmament.FrictionLab/Reports/summary.json",
+ "source_current_run": "Aetheris.Firmament.FrictionLab/Reports/fl2a-run.json",
+ "cases": [
+ {
+ "case_id": "mounting-bracket-basic",
+ "previous_status": "partial",
+ "current_status": "partial",
+ "changed": "no",
+ "improved": false,
+ "classification": "improved_but_still_blocked",
+ "artifact_present": false,
+ "step_artifact_path": null,
+ "possible": "partial",
+ "awkwardness": "high",
+ "remaining_blocker": "Boolean feature 'base_hole' (subtract) cannot re-enter the safe subtract family from 'bracket'. Safe-hole composition may start only from a bounded box/cylinder root or continue from a previously validated safe subtract result."
+ },
+ {
+ "case_id": "simple-bracket",
+ "previous_status": "partial",
+ "current_status": "partial",
+ "changed": "no",
+ "improved": false,
+ "classification": "unchanged_kernel_blocker",
+ "artifact_present": false,
+ "step_artifact_path": null,
+ "possible": "partial",
+ "awkwardness": "high",
+ "remaining_blocker": "Boolean feature 'bracket' (add): Boolean Union: M13 only supports recognized axis-aligned boxes from BrepPrimitives.CreateBox(...)."
+ },
+ {
+ "case_id": "ribbed-support",
+ "previous_status": "failure",
+ "current_status": "partial",
+ "changed": "yes",
+ "improved": true,
+ "classification": "improved_but_still_blocked",
+ "artifact_present": true,
+ "step_artifact_path": "Aetheris.Firmament.FrictionLab/Reports/Artifacts/ribbed-support.step",
+ "possible": "partial",
+ "awkwardness": "high",
+ "remaining_blocker": null
+ },
+ {
+ "case_id": "flange-bolt-circle",
+ "previous_status": "failure",
+ "current_status": "failure",
+ "changed": "no",
+ "improved": false,
+ "classification": "improved_but_still_blocked",
+ "artifact_present": false,
+ "step_artifact_path": null,
+ "possible": "true",
+ "awkwardness": "medium",
+ "remaining_blocker": "Boolean feature 'bolt_0' (subtract) cannot append another coaxial center bore in the bounded cylinder-root safe family."
+ },
+ {
+ "case_id": "blind-hole-mount-block",
+ "previous_status": "partial",
+ "current_status": "partial",
+ "changed": "no",
+ "improved": false,
+ "classification": "unchanged_kernel_blocker",
+ "artifact_present": false,
+ "step_artifact_path": null,
+ "possible": "partial",
+ "awkwardness": "medium",
+ "remaining_blocker": "Boolean feature 'blind_hole' (subtract) does not match the supported subtract span family; only through-holes or one-sided blind holes are allowed in this milestone."
+ },
+ {
+ "case_id": "counterbore-hole",
+ "previous_status": "partial",
+ "current_status": "partial",
+ "changed": "no",
+ "improved": false,
+ "classification": "unchanged_kernel_blocker",
+ "artifact_present": false,
+ "step_artifact_path": null,
+ "possible": "partial",
+ "awkwardness": "high",
+ "remaining_blocker": "Boolean feature 'counterbore_pocket' (subtract) does not match the supported subtract span family; only through-holes or one-sided blind holes are allowed in this milestone."
+ },
+ {
+ "case_id": "pocketed-plate",
+ "previous_status": "partial",
+ "current_status": "partial",
+ "changed": "no",
+ "improved": false,
+ "classification": "unchanged_kernel_blocker",
+ "artifact_present": false,
+ "step_artifact_path": null,
+ "possible": "partial",
+ "awkwardness": "medium",
+ "remaining_blocker": "Boolean feature 'pocket' (subtract): Boolean Subtract: box subtraction result is not representable as a single box in M13."
+ },
+ {
+ "case_id": "shaft-keyway",
+ "previous_status": "failure",
+ "current_status": "failure",
+ "changed": "no",
+ "improved": false,
+ "classification": "unchanged_kernel_blocker",
+ "artifact_present": false,
+ "step_artifact_path": null,
+ "possible": "true",
+ "awkwardness": "medium",
+ "remaining_blocker": "Boolean feature 'keyway' (subtract): Boolean Subtract: sequential safe composition only supports subtracting supported analytic holes from the current bounded safe root family."
+ }
+ ],
+ "improved_cases": [
+ "ribbed-support"
+ ],
+ "top_repeated_remaining_blockers": [
+ {
+ "blocker": "BrepBoolean.RebuildResult",
+ "count": 3
+ },
+ {
+ "blocker": "BrepBoolean.AnalyticHole.NotFullySpanning",
+ "count": 2
+ },
+ {
+ "blocker": "BrepBoolean.AnalyticHole.HoleInterference",
+ "count": 1
+ },
+ {
+ "blocker": "firmament.feature-graph.invalid-composition-order",
+ "count": 1
+ }
+ ],
+ "deterministic_case_order": [
+ "mounting-bracket-basic",
+ "simple-bracket",
+ "ribbed-support",
+ "flange-bolt-circle",
+ "blind-hole-mount-block",
+ "counterbore-hole",
+ "pocketed-plate",
+ "shaft-keyway"
+ ]
+}