Skip to content

Next Gen STEP AP242 Native-ish BREP Geometric Modeling Kernel

FL2f rerun: reassess 4 friction cases with STEP semantic inspection

Yuechen Lif7cb746b2646
diff --git a/Aetheris.Firmament.FrictionLab/Cases/mounting-bracket-basic/review.toon b/Aetheris.Firmament.FrictionLab/Cases/mounting-bracket-basic/review.toon
index 3a9736f3..224030aa 100644
--- a/Aetheris.Firmament.FrictionLab/Cases/mounting-bracket-basic/review.toon
+++ b/Aetheris.Firmament.FrictionLab/Cases/mounting-bracket-basic/review.toon
@@ -2,16 +2,17 @@ case_id: mounting-bracket-basic
possible: partial
awkwardness: high
pain_points[2]:
- - "Bracket add root is still not recognized as a bounded orthogonal safe subtract root for follow-on subtract features."
- - "Hole placement remains manual offset authoring with no semantic alignment helpers."
+ - "Build/export now succeeds, but STEP inspection shows the base-hole intent is not preserved after additive-root continuation."
+ - "Hole locations still require manual offsets with no semantic placement constraints."
proposed_features[2]:
- - "Broaden bounded additive-root recognition so valid bracket add/union results can re-enter safe subtract composition."
- - "Face/axis placement primitives for hole positioning."
-reviewer_verdict: "FL2e rerun is unchanged from FL2a: subtract continuation after bracket add still fails root recognition."
+ - "Stabilize subtract continuation placement through additive roots so hole frames stay anchored to intended geometry."
+ - "Add face/axis placement references for hole authoring."
+reviewer_verdict: "FL2f rerun changed from FL2e: export now succeeds, but geometry is semantically wrong (base_hole is misplaced from intended base position)."
previous_status: partial
current_status: partial
-changed: no
-improved: false
-classification: unchanged_kernel_blocker
-blocker_remaining: "Boolean feature 'base_hole' (subtract) cannot continue from 'bracket' because that prior add result is not a recognized bounded orthogonal safe subtract root."
-comparison_to_fl2a: "No status change relative to FL2a; G2 did not unlock this case's subtract continuation path."
+changed: yes
+improved: true
+classification: exported_but_semantically_wrong
+blocker_remaining: "Exported STEP has two cylindrical cuts, but base_hole appears at x=11 instead of the intended base-centered x=-15 offset; this is a root-interpretation/placement mismatch rather than a pure export failure."
+comparison_to_fl2e: "Compared with FL2e (no artifact), FL2f now emits STEP; however direct artifact inspection shows semantic mismatch in hole placement."
+step_artifact_semantic_inspection: "Artifact contains two cylindrical surfaces (r=3.5) centered at (11,0,22) and (26,0,22); first center does not match intended base_hole offset, so result is topologically valid but semantically wrong."
diff --git a/Aetheris.Firmament.FrictionLab/Cases/pocketed-plate/review.toon b/Aetheris.Firmament.FrictionLab/Cases/pocketed-plate/review.toon
index 0212cf41..3de4f7f2 100644
--- a/Aetheris.Firmament.FrictionLab/Cases/pocketed-plate/review.toon
+++ b/Aetheris.Firmament.FrictionLab/Cases/pocketed-plate/review.toon
@@ -2,14 +2,17 @@ case_id: pocketed-plate
possible: partial
awkwardness: medium
pain_points[2]:
- - "Region-removal relies on subtracting another box instead of declaring a pocket intent."
- - "Pocket depth and top-face reference are not explicit first-class concepts."
+ - "Pocket intent is still expressed as box subtraction and remains blocked by subtract rebuild representability."
+ - "Top-face anchored pocket semantics are still absent from production authoring flow."
proposed_features[2]:
- - "Pocket primitive with profile + depth definition."
- - "Feature references for top-face anchored cuts."
-reviewer_verdict: "Plate pocket is expressible only as primitive abuse; semantics are missing."
+ - "Support pocket-like subtract representability beyond single-box rebuild constraints."
+ - "Add feature references for top-face anchored depth cuts."
+reviewer_verdict: "FL2f rerun is unchanged from FL2a: pocket subtract still fails due to box-minus-box rebuild representability limits."
previous_status: partial
current_status: partial
changed: no
-blocker_class: unchanged_kernel_blocker
-blocker_remaining: "Box-minus-box pocket result still cannot be represented in current subtract rebuild model."
+improved: false
+classification: unchanged_kernel_blocker
+blocker_remaining: "Boolean feature 'pocket' (subtract): box subtraction result is not representable as a single box in M13."
+comparison_to_fl2a: "No status change relative to FL2a; blocker remained BrepBoolean.RebuildResult."
+step_artifact_semantic_inspection: "Not applicable: export did not succeed; no STEP artifact generated."
diff --git a/Aetheris.Firmament.FrictionLab/Cases/shaft-keyway/review.toon b/Aetheris.Firmament.FrictionLab/Cases/shaft-keyway/review.toon
index 7e35d1b5..01c062b9 100644
--- a/Aetheris.Firmament.FrictionLab/Cases/shaft-keyway/review.toon
+++ b/Aetheris.Firmament.FrictionLab/Cases/shaft-keyway/review.toon
@@ -2,16 +2,17 @@ case_id: shaft-keyway
possible: true
awkwardness: medium
pain_points[2]:
- - "Keyway subtract is still outside the supported sequential safe subtract family on bounded cylinder roots."
- - "Alignment intent remains offset-driven with no dedicated shaft/keyway semantic helper."
+ - "Keyway subtract remains outside the supported sequential safe subtract family on cylinder roots."
+ - "No semantic keyway primitive/reference exists; authoring remains offset-driven."
proposed_features[2]:
- - "Extend subtract family recognition for bounded cylinder-root slot/keyway geometry."
- - "Reference constraints against cylindrical faces/axes."
-reviewer_verdict: "FL2e rerun is unchanged from FL2a: keyway subtract remains unsupported by current safe composition rules."
+ - "Extend subtract-family support for bounded cylinder-root slot/keyway cuts."
+ - "Support cylindrical-face/axis anchoring for shaft features."
+reviewer_verdict: "FL2f rerun is unchanged from FL2e/FL2a: keyway subtract still fails execution in BrepBoolean.RebuildResult."
previous_status: failure
current_status: failure
changed: no
improved: false
classification: unchanged_kernel_blocker
-blocker_remaining: "Boolean feature 'keyway' (subtract): Boolean Subtract: sequential safe composition only supports subtracting supported analytic holes from the current bounded safe root family."
-comparison_to_fl2a: "No status change relative to FL2a; G2 does not materially improve this shaft/keyway case."
+blocker_remaining: "Boolean feature 'keyway' (subtract): sequential safe composition only supports subtracting supported analytic holes from the current bounded safe root family."
+comparison_to_fl2e: "No status or diagnostic class change relative to FL2e."
+step_artifact_semantic_inspection: "Not applicable: export did not succeed; no STEP artifact generated."
diff --git a/Aetheris.Firmament.FrictionLab/Cases/simple-bracket/review.toon b/Aetheris.Firmament.FrictionLab/Cases/simple-bracket/review.toon
index 60880a6f..59d30bc1 100644
--- a/Aetheris.Firmament.FrictionLab/Cases/simple-bracket/review.toon
+++ b/Aetheris.Firmament.FrictionLab/Cases/simple-bracket/review.toon
@@ -2,15 +2,16 @@ case_id: simple-bracket
possible: partial
awkwardness: high
pain_points[2]:
- - "Second bracket add still hits M13 union rebuild constraints for non-single-box recognized roots."
- - "Bracket intent is straightforward but expression remains blocked by limited add/union representability."
+ - "Build/export now succeeds, but STEP inspection indicates the final solid collapses to a single box instead of the intended multi-add bracket."
+ - "Add-chain intent remains fragile because semantic correctness cannot be inferred from export success alone."
proposed_features[1]:
- - "Expand boolean add execution beyond single recognized axis-aligned box rebuild constraints."
-reviewer_verdict: "FL2e rerun remains blocked at the same second-add union step seen in FL2a."
+ - "Preserve boolean-add semantics for chained bracket unions so resultant topology reflects intended profile."
+reviewer_verdict: "FL2f rerun changed from FL2e: export now succeeds, but the produced geometry is semantically wrong (not the intended bracket form)."
previous_status: partial
current_status: partial
-changed: no
-improved: false
-classification: unchanged_kernel_blocker
-blocker_remaining: "Boolean feature 'bracket' (add): Boolean Union: M13 only supports recognized axis-aligned boxes from BrepPrimitives.CreateBox(...)."
-comparison_to_fl2a: "No change versus FL2a; G2 does not affect this add/union blocker path."
+changed: yes
+improved: true
+classification: exported_but_semantically_wrong
+blocker_remaining: "STEP has one manifold solid with only 6 advanced faces (rectangular prism-like), indicating wrong boolean/add result for the intended bracket shape."
+comparison_to_fl2e: "Compared with FL2e (blocked at second add), FL2f now emits STEP; direct inspection shows topologically valid but semantically incorrect output."
+step_artifact_semantic_inspection: "Artifact exports as MANIFOLD_SOLID_BREP, but no cylindrical features and only 6 ADVANCED_FACE entries are present, matching a simple box rather than the intended L/bracket composition."
diff --git a/Aetheris.Firmament.FrictionLab/Reports/Artifacts/mounting-bracket-basic.step b/Aetheris.Firmament.FrictionLab/Reports/Artifacts/mounting-bracket-basic.step
new file mode 100644
index 00000000..b39c53a7
--- /dev/null
+++ b/Aetheris.Firmament.FrictionLab/Reports/Artifacts/mounting-bracket-basic.step
@@ -0,0 +1,280 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION(('Aetheris AP242 subset export'),'2;1');
+FILE_NAME('aetheris_export.step','1970-01-01T00:00:00',('Aetheris'),('Aetheris'),'Aetheris.Kernel','Aetheris.Kernel','');
+FILE_SCHEMA(('AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF'));
+ENDSEC;
+DATA;
+#1=CARTESIAN_POINT($,(26,0,22));
+#2=DIRECTION($,(0,0,-1));
+#3=DIRECTION($,(1,0,0));
+#4=AXIS2_PLACEMENT_3D($,#1,#2,#3);
+#5=PLANE($,#4);
+#6=CARTESIAN_POINT($,(7,-15,22));
+#7=VERTEX_POINT($,#6);
+#8=CARTESIAN_POINT($,(67,-15,22));
+#9=VERTEX_POINT($,#8);
+#10=CARTESIAN_POINT($,(7,-15,22));
+#11=DIRECTION($,(1,0,0));
+#12=VECTOR($,#11,1);
+#13=LINE($,#10,#12);
+#14=EDGE_CURVE($,#7,#9,#13,.T.);
+#15=ORIENTED_EDGE($,$,$,#14,.T.);
+#16=CARTESIAN_POINT($,(67,15,22));
+#17=VERTEX_POINT($,#16);
+#18=CARTESIAN_POINT($,(67,-15,22));
+#19=DIRECTION($,(0,1,0));
+#20=VECTOR($,#19,1);
+#21=LINE($,#18,#20);
+#22=EDGE_CURVE($,#9,#17,#21,.T.);
+#23=ORIENTED_EDGE($,$,$,#22,.T.);
+#24=CARTESIAN_POINT($,(7,15,22));
+#25=VERTEX_POINT($,#24);
+#26=CARTESIAN_POINT($,(67,15,22));
+#27=DIRECTION($,(-1,0,0));
+#28=VECTOR($,#27,1);
+#29=LINE($,#26,#28);
+#30=EDGE_CURVE($,#17,#25,#29,.T.);
+#31=ORIENTED_EDGE($,$,$,#30,.T.);
+#32=CARTESIAN_POINT($,(7,15,22));
+#33=DIRECTION($,(0,-1,0));
+#34=VECTOR($,#33,1);
+#35=LINE($,#32,#34);
+#36=EDGE_CURVE($,#25,#7,#35,.T.);
+#37=ORIENTED_EDGE($,$,$,#36,.T.);
+#38=EDGE_LOOP($,(#15,#23,#31,#37));
+#39=FACE_OUTER_BOUND('',#38,.T.);
+#40=CARTESIAN_POINT($,(14.5,0,22));
+#41=VERTEX_POINT($,#40);
+#42=CARTESIAN_POINT($,(11,0,22));
+#43=DIRECTION($,(0,0,1));
+#44=DIRECTION($,(1,0,0));
+#45=AXIS2_PLACEMENT_3D($,#42,#43,#44);
+#46=CIRCLE($,#45,3.5);
+#47=EDGE_CURVE($,#41,#41,#46,.T.);
+#48=ORIENTED_EDGE($,$,$,#47,.F.);
+#49=EDGE_LOOP($,(#48));
+#50=FACE_BOUND('',#49,.T.);
+#51=CARTESIAN_POINT($,(29.5,0,22));
+#52=VERTEX_POINT($,#51);
+#53=CARTESIAN_POINT($,(26,0,22));
+#54=DIRECTION($,(0,0,1));
+#55=DIRECTION($,(1,0,0));
+#56=AXIS2_PLACEMENT_3D($,#53,#54,#55);
+#57=CIRCLE($,#56,3.5);
+#58=EDGE_CURVE($,#52,#52,#57,.T.);
+#59=ORIENTED_EDGE($,$,$,#58,.F.);
+#60=EDGE_LOOP($,(#59));
+#61=FACE_BOUND('',#60,.T.);
+#62=ADVANCED_FACE('',(#39,#50,#61),#5,.T.);
+#63=CARTESIAN_POINT($,(26,0,62));
+#64=DIRECTION($,(0,0,1));
+#65=DIRECTION($,(1,0,0));
+#66=AXIS2_PLACEMENT_3D($,#63,#64,#65);
+#67=PLANE($,#66);
+#68=CARTESIAN_POINT($,(7,-15,62));
+#69=VERTEX_POINT($,#68);
+#70=CARTESIAN_POINT($,(67,-15,62));
+#71=VERTEX_POINT($,#70);
+#72=CARTESIAN_POINT($,(7,-15,62));
+#73=DIRECTION($,(1,0,0));
+#74=VECTOR($,#73,1);
+#75=LINE($,#72,#74);
+#76=EDGE_CURVE($,#69,#71,#75,.T.);
+#77=ORIENTED_EDGE($,$,$,#76,.T.);
+#78=CARTESIAN_POINT($,(67,15,62));
+#79=VERTEX_POINT($,#78);
+#80=CARTESIAN_POINT($,(67,-15,62));
+#81=DIRECTION($,(0,1,0));
+#82=VECTOR($,#81,1);
+#83=LINE($,#80,#82);
+#84=EDGE_CURVE($,#71,#79,#83,.T.);
+#85=ORIENTED_EDGE($,$,$,#84,.T.);
+#86=CARTESIAN_POINT($,(7,15,62));
+#87=VERTEX_POINT($,#86);
+#88=CARTESIAN_POINT($,(67,15,62));
+#89=DIRECTION($,(-1,0,0));
+#90=VECTOR($,#89,1);
+#91=LINE($,#88,#90);
+#92=EDGE_CURVE($,#79,#87,#91,.T.);
+#93=ORIENTED_EDGE($,$,$,#92,.T.);
+#94=CARTESIAN_POINT($,(7,15,62));
+#95=DIRECTION($,(0,-1,0));
+#96=VECTOR($,#95,1);
+#97=LINE($,#94,#96);
+#98=EDGE_CURVE($,#87,#69,#97,.T.);
+#99=ORIENTED_EDGE($,$,$,#98,.T.);
+#100=EDGE_LOOP($,(#77,#85,#93,#99));
+#101=FACE_OUTER_BOUND('',#100,.T.);
+#102=ADVANCED_FACE('',(#101),#67,.T.);
+#103=CARTESIAN_POINT($,(26,-15,18));
+#104=DIRECTION($,(0,-1,0));
+#105=DIRECTION($,(1,0,0));
+#106=AXIS2_PLACEMENT_3D($,#103,#104,#105);
+#107=PLANE($,#106);
+#108=ORIENTED_EDGE($,$,$,#14,.T.);
+#109=CARTESIAN_POINT($,(67,-15,22));
+#110=DIRECTION($,(0,0,1));
+#111=VECTOR($,#110,1);
+#112=LINE($,#109,#111);
+#113=EDGE_CURVE($,#9,#71,#112,.T.);
+#114=ORIENTED_EDGE($,$,$,#113,.T.);
+#115=ORIENTED_EDGE($,$,$,#76,.F.);
+#116=CARTESIAN_POINT($,(7,-15,22));
+#117=DIRECTION($,(0,0,1));
+#118=VECTOR($,#117,1);
+#119=LINE($,#116,#118);
+#120=EDGE_CURVE($,#7,#69,#119,.T.);
+#121=ORIENTED_EDGE($,$,$,#120,.F.);
+#122=EDGE_LOOP($,(#108,#114,#115,#121));
+#123=FACE_OUTER_BOUND('',#122,.T.);
+#124=ADVANCED_FACE('',(#123),#107,.T.);
+#125=CARTESIAN_POINT($,(67,0,18));
+#126=DIRECTION($,(1,0,0));
+#127=DIRECTION($,(0,1,0));
+#128=AXIS2_PLACEMENT_3D($,#125,#126,#127);
+#129=PLANE($,#128);
+#130=ORIENTED_EDGE($,$,$,#22,.T.);
+#131=CARTESIAN_POINT($,(67,15,22));
+#132=DIRECTION($,(0,0,1));
+#133=VECTOR($,#132,1);
+#134=LINE($,#131,#133);
+#135=EDGE_CURVE($,#17,#79,#134,.T.);
+#136=ORIENTED_EDGE($,$,$,#135,.T.);
+#137=ORIENTED_EDGE($,$,$,#84,.F.);
+#138=ORIENTED_EDGE($,$,$,#113,.F.);
+#139=EDGE_LOOP($,(#130,#136,#137,#138));
+#140=FACE_OUTER_BOUND('',#139,.T.);
+#141=ADVANCED_FACE('',(#140),#129,.T.);
+#142=CARTESIAN_POINT($,(26,15,18));
+#143=DIRECTION($,(0,1,0));
+#144=DIRECTION($,(-1,0,0));
+#145=AXIS2_PLACEMENT_3D($,#142,#143,#144);
+#146=PLANE($,#145);
+#147=ORIENTED_EDGE($,$,$,#30,.T.);
+#148=CARTESIAN_POINT($,(7,15,22));
+#149=DIRECTION($,(0,0,1));
+#150=VECTOR($,#149,1);
+#151=LINE($,#148,#150);
+#152=EDGE_CURVE($,#25,#87,#151,.T.);
+#153=ORIENTED_EDGE($,$,$,#152,.T.);
+#154=ORIENTED_EDGE($,$,$,#92,.F.);
+#155=ORIENTED_EDGE($,$,$,#135,.F.);
+#156=EDGE_LOOP($,(#147,#153,#154,#155));
+#157=FACE_OUTER_BOUND('',#156,.T.);
+#158=ADVANCED_FACE('',(#157),#146,.T.);
+#159=CARTESIAN_POINT($,(7,0,18));
+#160=DIRECTION($,(-1,0,0));
+#161=DIRECTION($,(0,1,0));
+#162=AXIS2_PLACEMENT_3D($,#159,#160,#161);
+#163=PLANE($,#162);
+#164=ORIENTED_EDGE($,$,$,#36,.T.);
+#165=ORIENTED_EDGE($,$,$,#120,.T.);
+#166=ORIENTED_EDGE($,$,$,#98,.F.);
+#167=ORIENTED_EDGE($,$,$,#152,.F.);
+#168=EDGE_LOOP($,(#164,#165,#166,#167));
+#169=FACE_OUTER_BOUND('',#168,.T.);
+#170=ADVANCED_FACE('',(#169),#163,.T.);
+#171=CARTESIAN_POINT($,(11,0,22));
+#172=DIRECTION($,(0,0,1));
+#173=DIRECTION($,(1,0,0));
+#174=AXIS2_PLACEMENT_3D($,#171,#172,#173);
+#175=CYLINDRICAL_SURFACE($,#174,3.5);
+#176=CARTESIAN_POINT($,(14.5,0,28));
+#177=VERTEX_POINT($,#176);
+#178=CARTESIAN_POINT($,(14.5,0,22));
+#179=VERTEX_POINT($,#178);
+#180=CARTESIAN_POINT($,(14.5,0,28));
+#181=DIRECTION($,(0,0,-1));
+#182=VECTOR($,#181,1);
+#183=LINE($,#180,#182);
+#184=EDGE_CURVE($,#177,#179,#183,.T.);
+#185=ORIENTED_EDGE($,$,$,#184,.T.);
+#186=CARTESIAN_POINT($,(14.5,0,28));
+#187=VERTEX_POINT($,#186);
+#188=CARTESIAN_POINT($,(11,0,28));
+#189=DIRECTION($,(0,0,1));
+#190=DIRECTION($,(1,0,0));
+#191=AXIS2_PLACEMENT_3D($,#188,#189,#190);
+#192=CIRCLE($,#191,3.5);
+#193=EDGE_CURVE($,#187,#187,#192,.T.);
+#194=ORIENTED_EDGE($,$,$,#193,.F.);
+#195=ORIENTED_EDGE($,$,$,#184,.F.);
+#196=ORIENTED_EDGE($,$,$,#47,.T.);
+#197=EDGE_LOOP($,(#185,#194,#195,#196));
+#198=FACE_OUTER_BOUND('',#197,.T.);
+#199=ADVANCED_FACE('',(#198),#175,.T.);
+#200=CARTESIAN_POINT($,(26,0,22));
+#201=DIRECTION($,(0,0,1));
+#202=DIRECTION($,(1,0,0));
+#203=AXIS2_PLACEMENT_3D($,#200,#201,#202);
+#204=CYLINDRICAL_SURFACE($,#203,3.5);
+#205=CARTESIAN_POINT($,(29.5,0,28));
+#206=VERTEX_POINT($,#205);
+#207=CARTESIAN_POINT($,(29.5,0,22));
+#208=VERTEX_POINT($,#207);
+#209=CARTESIAN_POINT($,(29.5,0,28));
+#210=DIRECTION($,(0,0,-1));
+#211=VECTOR($,#210,1);
+#212=LINE($,#209,#211);
+#213=EDGE_CURVE($,#206,#208,#212,.T.);
+#214=ORIENTED_EDGE($,$,$,#213,.T.);
+#215=CARTESIAN_POINT($,(29.5,0,28));
+#216=VERTEX_POINT($,#215);
+#217=CARTESIAN_POINT($,(26,0,28));
+#218=DIRECTION($,(0,0,1));
+#219=DIRECTION($,(1,0,0));
+#220=AXIS2_PLACEMENT_3D($,#217,#218,#219);
+#221=CIRCLE($,#220,3.5);
+#222=EDGE_CURVE($,#216,#216,#221,.T.);
+#223=ORIENTED_EDGE($,$,$,#222,.F.);
+#224=ORIENTED_EDGE($,$,$,#213,.F.);
+#225=ORIENTED_EDGE($,$,$,#58,.T.);
+#226=EDGE_LOOP($,(#214,#223,#224,#225));
+#227=FACE_OUTER_BOUND('',#226,.T.);
+#228=ADVANCED_FACE('',(#227),#204,.T.);
+#229=CARTESIAN_POINT($,(11,0,28));
+#230=DIRECTION($,(-0,-0,-1));
+#231=DIRECTION($,(1,0,0));
+#232=AXIS2_PLACEMENT_3D($,#229,#230,#231);
+#233=PLANE($,#232);
+#234=ORIENTED_EDGE($,$,$,#193,.T.);
+#235=EDGE_LOOP($,(#234));
+#236=FACE_OUTER_BOUND('',#235,.T.);
+#237=ADVANCED_FACE('',(#236),#233,.T.);
+#238=CARTESIAN_POINT($,(26,0,28));
+#239=DIRECTION($,(-0,-0,-1));
+#240=DIRECTION($,(1,0,0));
+#241=AXIS2_PLACEMENT_3D($,#238,#239,#240);
+#242=PLANE($,#241);
+#243=ORIENTED_EDGE($,$,$,#222,.T.);
+#244=EDGE_LOOP($,(#243));
+#245=FACE_OUTER_BOUND('',#244,.T.);
+#246=ADVANCED_FACE('',(#245),#242,.T.);
+#247=CLOSED_SHELL($,(#62,#102,#124,#141,#158,#170,#199,#228,#237,#246));
+#248=MANIFOLD_SOLID_BREP('AetherisBody',#247);
+#249=APPLICATION_CONTEXT('mechanical design');
+#250=PRODUCT_CONTEXT('',#249,'mechanical');
+#251=PRODUCT('AETHERIS','AetherisBody','',(#250));
+#252=PRODUCT_DEFINITION_FORMATION('','',#251);
+#253=PRODUCT_DEFINITION_CONTEXT('design',#249,'design');
+#254=PRODUCT_DEFINITION('','',#252,#253);
+#255=PRODUCT_DEFINITION_SHAPE('','',#254);
+#256=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
+#257=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
+#258=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
+#259=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNIT_ASSIGNED_CONTEXT((#256,#257,#258))REPRESENTATION_CONTEXT('3','3D'));
+#260=SHAPE_ASPECT('firmament-feature:base_hole','supported cylinder through-hole feature',#255,.FALSE.);
+#261=PROPERTY_DEFINITION('diameter:base_hole','auto-derived semantic PMI diameter',#260);
+#262=MEASURE_REPRESENTATION_ITEM('diameter',7,#256);
+#263=SHAPE_DIMENSION_REPRESENTATION('diameter:base_hole',(#262),#259);
+#264=PROPERTY_DEFINITION_REPRESENTATION(#261,#263);
+#265=SHAPE_ASPECT('firmament-feature:upright_hole','supported cylinder through-hole feature',#255,.FALSE.);
+#266=PROPERTY_DEFINITION('diameter:upright_hole','auto-derived semantic PMI diameter',#265);
+#267=MEASURE_REPRESENTATION_ITEM('diameter',7,#256);
+#268=SHAPE_DIMENSION_REPRESENTATION('diameter:upright_hole',(#267),#259);
+#269=PROPERTY_DEFINITION_REPRESENTATION(#266,#268);
+#270=SHAPE_REPRESENTATION('AetherisBody',(#248),#259);
+#271=SHAPE_DEFINITION_REPRESENTATION(#255,#270);
+ENDSEC;
+END-ISO-10303-21;
diff --git a/Aetheris.Firmament.FrictionLab/Reports/Artifacts/simple-bracket.step b/Aetheris.Firmament.FrictionLab/Reports/Artifacts/simple-bracket.step
new file mode 100644
index 00000000..76898f7a
--- /dev/null
+++ b/Aetheris.Firmament.FrictionLab/Reports/Artifacts/simple-bracket.step
@@ -0,0 +1,172 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION(('Aetheris AP242 subset export'),'2;1');
+FILE_NAME('aetheris_export.step','1970-01-01T00:00:00',('Aetheris'),('Aetheris'),'Aetheris.Kernel','Aetheris.Kernel','');
+FILE_SCHEMA(('AP242_MANAGED_MODEL_BASED_3D_ENGINEERING_MIM_LF'));
+ENDSEC;
+DATA;
+#1=CARTESIAN_POINT($,(0,0,3));
+#2=DIRECTION($,(0,0,-1));
+#3=DIRECTION($,(1,0,0));
+#4=AXIS2_PLACEMENT_3D($,#1,#2,#3);
+#5=PLANE($,#4);
+#6=CARTESIAN_POINT($,(-20,-5,3));
+#7=VERTEX_POINT($,#6);
+#8=CARTESIAN_POINT($,(20,-5,3));
+#9=VERTEX_POINT($,#8);
+#10=CARTESIAN_POINT($,(-20,-5,3));
+#11=DIRECTION($,(1,0,0));
+#12=VECTOR($,#11,1);
+#13=LINE($,#10,#12);
+#14=EDGE_CURVE($,#7,#9,#13,.T.);
+#15=ORIENTED_EDGE($,$,$,#14,.T.);
+#16=CARTESIAN_POINT($,(20,5,3));
+#17=VERTEX_POINT($,#16);
+#18=CARTESIAN_POINT($,(20,-5,3));
+#19=DIRECTION($,(0,1,0));
+#20=VECTOR($,#19,1);
+#21=LINE($,#18,#20);
+#22=EDGE_CURVE($,#9,#17,#21,.T.);
+#23=ORIENTED_EDGE($,$,$,#22,.T.);
+#24=CARTESIAN_POINT($,(-20,5,3));
+#25=VERTEX_POINT($,#24);
+#26=CARTESIAN_POINT($,(20,5,3));
+#27=DIRECTION($,(-1,0,0));
+#28=VECTOR($,#27,1);
+#29=LINE($,#26,#28);
+#30=EDGE_CURVE($,#17,#25,#29,.T.);
+#31=ORIENTED_EDGE($,$,$,#30,.T.);
+#32=CARTESIAN_POINT($,(-20,5,3));
+#33=DIRECTION($,(0,-1,0));
+#34=VECTOR($,#33,1);
+#35=LINE($,#32,#34);
+#36=EDGE_CURVE($,#25,#7,#35,.T.);
+#37=ORIENTED_EDGE($,$,$,#36,.T.);
+#38=EDGE_LOOP($,(#15,#23,#31,#37));
+#39=FACE_OUTER_BOUND('',#38,.T.);
+#40=ADVANCED_FACE('',(#39),#5,.T.);
+#41=CARTESIAN_POINT($,(0,0,30));
+#42=DIRECTION($,(0,0,1));
+#43=DIRECTION($,(1,0,0));
+#44=AXIS2_PLACEMENT_3D($,#41,#42,#43);
+#45=PLANE($,#44);
+#46=CARTESIAN_POINT($,(-20,-5,30));
+#47=VERTEX_POINT($,#46);
+#48=CARTESIAN_POINT($,(20,-5,30));
+#49=VERTEX_POINT($,#48);
+#50=CARTESIAN_POINT($,(-20,-5,30));
+#51=DIRECTION($,(1,0,0));
+#52=VECTOR($,#51,1);
+#53=LINE($,#50,#52);
+#54=EDGE_CURVE($,#47,#49,#53,.T.);
+#55=ORIENTED_EDGE($,$,$,#54,.T.);
+#56=CARTESIAN_POINT($,(20,5,30));
+#57=VERTEX_POINT($,#56);
+#58=CARTESIAN_POINT($,(20,-5,30));
+#59=DIRECTION($,(0,1,0));
+#60=VECTOR($,#59,1);
+#61=LINE($,#58,#60);
+#62=EDGE_CURVE($,#49,#57,#61,.T.);
+#63=ORIENTED_EDGE($,$,$,#62,.T.);
+#64=CARTESIAN_POINT($,(-20,5,30));
+#65=VERTEX_POINT($,#64);
+#66=CARTESIAN_POINT($,(20,5,30));
+#67=DIRECTION($,(-1,0,0));
+#68=VECTOR($,#67,1);
+#69=LINE($,#66,#68);
+#70=EDGE_CURVE($,#57,#65,#69,.T.);
+#71=ORIENTED_EDGE($,$,$,#70,.T.);
+#72=CARTESIAN_POINT($,(-20,5,30));
+#73=DIRECTION($,(0,-1,0));
+#74=VECTOR($,#73,1);
+#75=LINE($,#72,#74);
+#76=EDGE_CURVE($,#65,#47,#75,.T.);
+#77=ORIENTED_EDGE($,$,$,#76,.T.);
+#78=EDGE_LOOP($,(#55,#63,#71,#77));
+#79=FACE_OUTER_BOUND('',#78,.T.);
+#80=ADVANCED_FACE('',(#79),#45,.T.);
+#81=CARTESIAN_POINT($,(0,-5,16.5));
+#82=DIRECTION($,(0,-1,0));
+#83=DIRECTION($,(1,0,0));
+#84=AXIS2_PLACEMENT_3D($,#81,#82,#83);
+#85=PLANE($,#84);
+#86=ORIENTED_EDGE($,$,$,#14,.T.);
+#87=CARTESIAN_POINT($,(20,-5,3));
+#88=DIRECTION($,(0,0,1));
+#89=VECTOR($,#88,1);
+#90=LINE($,#87,#89);
+#91=EDGE_CURVE($,#9,#49,#90,.T.);
+#92=ORIENTED_EDGE($,$,$,#91,.T.);
+#93=ORIENTED_EDGE($,$,$,#54,.F.);
+#94=CARTESIAN_POINT($,(-20,-5,3));
+#95=DIRECTION($,(0,0,1));
+#96=VECTOR($,#95,1);
+#97=LINE($,#94,#96);
+#98=EDGE_CURVE($,#7,#47,#97,.T.);
+#99=ORIENTED_EDGE($,$,$,#98,.F.);
+#100=EDGE_LOOP($,(#86,#92,#93,#99));
+#101=FACE_OUTER_BOUND('',#100,.T.);
+#102=ADVANCED_FACE('',(#101),#85,.T.);
+#103=CARTESIAN_POINT($,(20,0,16.5));
+#104=DIRECTION($,(1,0,0));
+#105=DIRECTION($,(0,1,0));
+#106=AXIS2_PLACEMENT_3D($,#103,#104,#105);
+#107=PLANE($,#106);
+#108=ORIENTED_EDGE($,$,$,#22,.T.);
+#109=CARTESIAN_POINT($,(20,5,3));
+#110=DIRECTION($,(0,0,1));
+#111=VECTOR($,#110,1);
+#112=LINE($,#109,#111);
+#113=EDGE_CURVE($,#17,#57,#112,.T.);
+#114=ORIENTED_EDGE($,$,$,#113,.T.);
+#115=ORIENTED_EDGE($,$,$,#62,.F.);
+#116=ORIENTED_EDGE($,$,$,#91,.F.);
+#117=EDGE_LOOP($,(#108,#114,#115,#116));
+#118=FACE_OUTER_BOUND('',#117,.T.);
+#119=ADVANCED_FACE('',(#118),#107,.T.);
+#120=CARTESIAN_POINT($,(0,5,16.5));
+#121=DIRECTION($,(0,1,0));
+#122=DIRECTION($,(-1,0,0));
+#123=AXIS2_PLACEMENT_3D($,#120,#121,#122);
+#124=PLANE($,#123);
+#125=ORIENTED_EDGE($,$,$,#30,.T.);
+#126=CARTESIAN_POINT($,(-20,5,3));
+#127=DIRECTION($,(0,0,1));
+#128=VECTOR($,#127,1);
+#129=LINE($,#126,#128);
+#130=EDGE_CURVE($,#25,#65,#129,.T.);
+#131=ORIENTED_EDGE($,$,$,#130,.T.);
+#132=ORIENTED_EDGE($,$,$,#70,.F.);
+#133=ORIENTED_EDGE($,$,$,#113,.F.);
+#134=EDGE_LOOP($,(#125,#131,#132,#133));
+#135=FACE_OUTER_BOUND('',#134,.T.);
+#136=ADVANCED_FACE('',(#135),#124,.T.);
+#137=CARTESIAN_POINT($,(-20,0,16.5));
+#138=DIRECTION($,(-1,0,0));
+#139=DIRECTION($,(0,1,0));
+#140=AXIS2_PLACEMENT_3D($,#137,#138,#139);
+#141=PLANE($,#140);
+#142=ORIENTED_EDGE($,$,$,#36,.T.);
+#143=ORIENTED_EDGE($,$,$,#98,.T.);
+#144=ORIENTED_EDGE($,$,$,#76,.F.);
+#145=ORIENTED_EDGE($,$,$,#130,.F.);
+#146=EDGE_LOOP($,(#142,#143,#144,#145));
+#147=FACE_OUTER_BOUND('',#146,.T.);
+#148=ADVANCED_FACE('',(#147),#141,.T.);
+#149=CLOSED_SHELL($,(#40,#80,#102,#119,#136,#148));
+#150=MANIFOLD_SOLID_BREP('AetherisBody',#149);
+#151=APPLICATION_CONTEXT('mechanical design');
+#152=PRODUCT_CONTEXT('',#151,'mechanical');
+#153=PRODUCT('AETHERIS','AetherisBody','',(#152));
+#154=PRODUCT_DEFINITION_FORMATION('','',#153);
+#155=PRODUCT_DEFINITION_CONTEXT('design',#151,'design');
+#156=PRODUCT_DEFINITION('','',#154,#155);
+#157=PRODUCT_DEFINITION_SHAPE('','',#156);
+#158=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
+#159=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
+#160=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
+#161=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNIT_ASSIGNED_CONTEXT((#158,#159,#160))REPRESENTATION_CONTEXT('3','3D'));
+#162=SHAPE_REPRESENTATION('AetherisBody',(#150),#161);
+#163=SHAPE_DEFINITION_REPRESENTATION(#157,#162);
+ENDSEC;
+END-ISO-10303-21;
diff --git a/Aetheris.Firmament.FrictionLab/Reports/fl2f-run.json b/Aetheris.Firmament.FrictionLab/Reports/fl2f-run.json
new file mode 100644
index 00000000..e550ccd1
--- /dev/null
+++ b/Aetheris.Firmament.FrictionLab/Reports/fl2f-run.json
@@ -0,0 +1,71 @@
+{
+ "totalCases": 4,
+ "successCount": 0,
+ "partialCount": 3,
+ "failureCount": 1,
+ "caseResults": [
+ {
+ "caseId": "mounting-bracket-basic",
+ "buildStatus": "partial",
+ "artifactPresent": true,
+ "stepArtifactPath": "Aetheris.Firmament.FrictionLab/Reports/Artifacts/mounting-bracket-basic.step",
+ "possible": "partial",
+ "awkwardness": "high",
+ "diagnostics": []
+ },
+ {
+ "caseId": "simple-bracket",
+ "buildStatus": "partial",
+ "artifactPresent": true,
+ "stepArtifactPath": "Aetheris.Firmament.FrictionLab/Reports/Artifacts/simple-bracket.step",
+ "possible": "partial",
+ "awkwardness": "high",
+ "diagnostics": []
+ },
+ {
+ "caseId": "shaft-keyway",
+ "buildStatus": "failure",
+ "artifactPresent": false,
+ "stepArtifactPath": null,
+ "possible": "true",
+ "awkwardness": "medium",
+ "diagnostics": [
+ {
+ "code": "NotImplemented",
+ "severity": "Error",
+ "message": "Requested boolean feature \u0027keyway\u0027 (subtract) could not be executed.",
+ "source": "firmament"
+ },
+ {
+ "code": "NotImplemented",
+ "severity": "Error",
+ "message": "Boolean feature \u0027keyway\u0027 (subtract): Boolean Subtract: sequential safe composition only supports subtracting supported analytic holes from the current bounded safe root family.",
+ "source": "BrepBoolean.RebuildResult"
+ }
+ ]
+ },
+ {
+ "caseId": "pocketed-plate",
+ "buildStatus": "partial",
+ "artifactPresent": false,
+ "stepArtifactPath": null,
+ "possible": "partial",
+ "awkwardness": "medium",
+ "diagnostics": [
+ {
+ "code": "NotImplemented",
+ "severity": "Error",
+ "message": "Requested boolean feature \u0027pocket\u0027 (subtract) could not be executed.",
+ "source": "firmament"
+ },
+ {
+ "code": "NotImplemented",
+ "severity": "Error",
+ "message": "Boolean feature \u0027pocket\u0027 (subtract): Boolean Subtract: box subtraction result is not representable as a single box in M13.",
+ "source": "BrepBoolean.RebuildResult"
+ }
+ ]
+ }
+ ],
+ "summaryPath": "Aetheris.Firmament.FrictionLab/Reports/fl2f-run.json"
+}
\ No newline at end of file
diff --git a/Aetheris.Firmament.FrictionLab/Reports/fl2f-summary.json b/Aetheris.Firmament.FrictionLab/Reports/fl2f-summary.json
new file mode 100644
index 00000000..c3544676
--- /dev/null
+++ b/Aetheris.Firmament.FrictionLab/Reports/fl2f-summary.json
@@ -0,0 +1,124 @@
+{
+ "milestone": "FL2f",
+ "description": "Targeted friction rerun with direct STEP artifact semantic inspection after G8 additive-root and multi-hole continuation changes.",
+ "rerun_case_count": 4,
+ "source_previous_summaries": [
+ "Aetheris.Firmament.FrictionLab/Reports/fl2e-summary.json",
+ "Aetheris.Firmament.FrictionLab/Reports/fl2a-summary.json"
+ ],
+ "source_current_run": "Aetheris.Firmament.FrictionLab/Reports/fl2f-run.json",
+ "cases": [
+ {
+ "case_id": "mounting-bracket-basic",
+ "previous_status": "partial",
+ "current_status": "partial",
+ "changed": "yes",
+ "improved": true,
+ "classification": "exported_but_semantically_wrong",
+ "artifact_present": true,
+ "step_artifact_path": "Aetheris.Firmament.FrictionLab/Reports/Artifacts/mounting-bracket-basic.step",
+ "possible": "partial",
+ "awkwardness": "high",
+ "remaining_blocker": "Additive-root continuation now exports, but base_hole placement is semantically wrong (root interpretation / feature placement mismatch).",
+ "step_semantic_inspection": {
+ "inspected": true,
+ "expected_feature_geometry_present": true,
+ "semantically_correct": false,
+ "mismatch_kind": "wrong root interpretation",
+ "inspection_notes": "Two cylindrical cuts exist (r=3.5), but centers are at (11,0,22) and (26,0,22); base_hole intent from offset -15 on base is not preserved."
+ }
+ },
+ {
+ "case_id": "simple-bracket",
+ "previous_status": "partial",
+ "current_status": "partial",
+ "changed": "yes",
+ "improved": true,
+ "classification": "exported_but_semantically_wrong",
+ "artifact_present": true,
+ "step_artifact_path": "Aetheris.Firmament.FrictionLab/Reports/Artifacts/simple-bracket.step",
+ "possible": "partial",
+ "awkwardness": "high",
+ "remaining_blocker": "Boolean add chain exports but semantic bracket shape is not preserved (result degenerates to simple box-like solid).",
+ "step_semantic_inspection": {
+ "inspected": true,
+ "expected_feature_geometry_present": false,
+ "semantically_correct": false,
+ "mismatch_kind": "topologically valid but semantically wrong",
+ "inspection_notes": "Artifact is a valid manifold solid but contains only 6 ADVANCED_FACE entries, indicating box-like output rather than intended bracket composition."
+ }
+ },
+ {
+ "case_id": "shaft-keyway",
+ "previous_status": "failure",
+ "current_status": "failure",
+ "changed": "no",
+ "improved": false,
+ "classification": "unchanged_kernel_blocker",
+ "artifact_present": false,
+ "step_artifact_path": null,
+ "possible": "true",
+ "awkwardness": "medium",
+ "remaining_blocker": "Boolean Subtract safe composition still only supports supported analytic holes on bounded safe roots.",
+ "step_semantic_inspection": {
+ "inspected": false,
+ "expected_feature_geometry_present": false,
+ "semantically_correct": false,
+ "mismatch_kind": "other",
+ "inspection_notes": "No STEP artifact: execution stops with BrepBoolean.RebuildResult NotImplemented diagnostic."
+ }
+ },
+ {
+ "case_id": "pocketed-plate",
+ "previous_status": "partial",
+ "current_status": "partial",
+ "changed": "no",
+ "improved": false,
+ "classification": "unchanged_kernel_blocker",
+ "artifact_present": false,
+ "step_artifact_path": null,
+ "possible": "partial",
+ "awkwardness": "medium",
+ "remaining_blocker": "Box-minus-box pocket subtract remains unrepresentable as a single-box rebuild in current M13 path.",
+ "step_semantic_inspection": {
+ "inspected": false,
+ "expected_feature_geometry_present": false,
+ "semantically_correct": false,
+ "mismatch_kind": "other",
+ "inspection_notes": "No STEP artifact: execution stops with BrepBoolean.RebuildResult representability diagnostic."
+ }
+ }
+ ],
+ "step_artifact_case_count": 2,
+ "improved_cases": [
+ "mounting-bracket-basic",
+ "simple-bracket"
+ ],
+ "top_repeated_remaining_blockers": [
+ {
+ "blocker": "BrepBoolean.RebuildResult",
+ "count": 2
+ },
+ {
+ "blocker": "semantic-mismatch-after-export",
+ "count": 2
+ }
+ ],
+ "top_repeated_remaining_blocker_classes": [
+ {
+ "classification": "exported_but_semantically_wrong",
+ "count": 2
+ },
+ {
+ "classification": "unchanged_kernel_blocker",
+ "count": 2
+ }
+ ],
+ "next_blocker_after_g8": "Export-level success without semantic fidelity (especially additive-root continuation placement/shape correctness) is now the highest-priority blocker class.",
+ "deterministic_case_order": [
+ "mounting-bracket-basic",
+ "simple-bracket",
+ "shaft-keyway",
+ "pocketed-plate"
+ ]
+}