An open source design system that's fully customizable and agent ready
TypeScript
test(interaction-harness): a busy-window control clock and a marker search in a region (#9872)
Christopher Chedeauc239dafbd505
diff --git a/internal/interaction-harness/README.md b/internal/interaction-harness/README.mdindex 87b057343d..eccdde353e 100644--- a/internal/interaction-harness/README.md+++ b/internal/interaction-harness/README.md@@ -218,9 +218,11 @@ entry: in WebKit, with the popover above BottomSheet's open modal dialog, thesheet's dim held for 155 to 225 ms into a block while the control moved, andinside the dialog it moves in step with the sheet. `waitForAnimation` and`blockMainThread`'s `during` never count the control's own animation, so on-a dialog they still wait for the backdrop's. Track it from the-same screencast (`trackMarker(page, frames, {rgb: CONTROL_RGB})`) and pass it-as `control`: the component passes when it moved on every frame the control+a dialog they still wait for the backdrop's. Track a top-layer control from+the same screencast with `trackControl(page, frames)` (`trackMarker` with+`CONTROL_RGB`, searching only the top strip it crosses). A control mounted+`within` a dialog moves with it, so track that one with `trackMarker(page,+frames, {rgb: CONTROL_RGB})`. Pass either as `control`: the component passes when it moved on every frame the controlmoved and its longest stall is no longer than the control's. Both are read fromthe same screencast frames, so a compositor animation misses none. A window inwhich the control moved on fewer than four frames fails, since the machine@@ -245,6 +247,13 @@ is read from the value's changes in the judged part, so a position the pagecommits off the grid once the block ends does not shrink it.A main-thread animation still fails: the control moves and it does not.+`controlClock(control)` reads the compositor's own time in each frame off the+control's position, for a proof that judges motion against time, not against+the screencast's stamps. A loaded machine stamps frames late, and+`inPresentationOrder` can then put a frame after frames that came after it.+The clock takes the cycle origin that most frames agree with, so such a frame+moves only its own reading. A frame within 36 px of a turn gets no reading.+An animation that lasts a fraction of a second, such as a 0.2 s fade, leaves ablock only a few frames to judge: in WebKit, or on a loaded machine, the controlcan present fewer than four, and one run cannot decide. Play it several timesdiff --git a/internal/interaction-harness/src/busy.clock.test.ts b/internal/interaction-harness/src/busy.clock.test.tsnew file mode 100644index 0000000000..8a431edd36--- /dev/null+++ b/internal/interaction-harness/src/busy.clock.test.ts@@ -0,0 +1,161 @@+// Copyright (c) Meta Platforms, Inc. and affiliates.++/**+ * @file busy.clock.test.ts+ * @input Synthetic control frames (no browser)+ * @output The control's clock. Its readings follow the control's animation+ * time across turns and gaps, whatever the stamps say, also for frames+ * stamped late and put out of order. A frame near a turn, or one that+ * repeats the position before it, gets no reading. Includes the cases of+ * the animator spec's former clock.+ * @position Unit test of ./busy's controlClock+ */++import {describe, expect, it} from 'vitest';+import {controlClock} from './busy';+import {inPresentationOrder, type TrackedFrame} from './frames';++const FRAME = 1000 / 60;++/** The control's x at animation time `ms`: 240 px one way every 400 ms. */+function xAt(ms: number): number {+ const leg = Math.floor(ms / 400);+ const along = ((ms % 400) / 400) * 240;+ return leg % 2 === 0 ? along : 240 - along;+}++/** One frame per animation time in `times`, stamped `late(i)` ms after it. */+function control(+ times: readonly number[],+ late: (i: number) => number = () => 0,+): TrackedFrame[] {+ return times.map((ms, i) => ({+ t: 5000 + ms + late(i),+ box: {x: xAt(ms), y: 0, width: 12, height: 12},+ pixels: 144,+ }));+}++/** Animation times one frame apart, from `from` to `to`. */+function frameTimes(from: number, to: number): number[] {+ const out: number[] = [];+ for (let ms = from; ms <= to; ms += FRAME) {+ out.push(ms);+ }+ return out;+}++/** Each frame's animation time, by its stamp (frames as `control` made them). */+function timesByStamp(+ times: readonly number[],+ frames: readonly TrackedFrame[],+): Map<number, number> {+ return new Map(frames.map((frame, i) => [frame.t, times[i]]));+}++/**+ * Expects every reading to equal its frame's animation time, both measured+ * from the earliest frame read, and returns the readings.+ */+function expectAnimationTimes(+ clock: Map<number, number>,+ times: Map<number, number>,+): {ms: number; at: number}[] {+ const read = [...clock].map(([t, at]) => ({ms: times.get(t) ?? NaN, at}));+ read.sort((a, b) => a.ms - b.ms);+ for (const reading of read) {+ expect(reading.at - read[0].at).toBeCloseTo(reading.ms - read[0].ms, 6);+ }+ return read;+}++describe('controlClock', () => {+ it('reads the animation time across turns, whatever the stamps say', () => {+ // Three turns, at 400, 800 and 1200 ms; every other frame stamped 12 ms+ // late, as a loaded machine presents them.+ const times = frameTimes(250, 1450);+ const frames = control(times, i => (i % 2) * 12);+ const clock = controlClock(frames);+ expectAnimationTimes(clock, timesByStamp(times, frames));+ // Every frame at least 36 px from both ends is read, and no other.+ for (const frame of frames) {+ const x = frame.box?.x ?? -1;+ expect(clock.has(frame.t)).toBe(x >= 36 && x <= 204);+ }+ });++ it('gives no reading to a frame near a turn', () => {+ // The turn is at 400 ms. At 360 and 410 ms the box is 24 and 6 px from+ // the end, where the two times that its position gives are close.+ const frames = control([300, 360, 410, 470]);+ const clock = controlClock(frames);+ expect(clock.has(frames[1].t)).toBe(false);+ expect(clock.has(frames[2].t)).toBe(false);+ expect(clock.get(frames[3].t)! - clock.get(frames[0].t)!).toBeCloseTo(+ 170,+ 6,+ );+ });++ it('reads across a gap of a whole leg or more', () => {+ const times = [100, 120, 540, 560, 1300];+ const frames = control(times);+ const read = expectAnimationTimes(+ controlClock(frames),+ timesByStamp(times, frames),+ );+ expect(read).toHaveLength(times.length);+ });++ it('reads late frames that inPresentationOrder put out of order at their own time', () => {+ // Frames one frame apart across the turn at 400 ms. Their stamps run 20+ // to 50 ms late in turn, so a frame can land after later frames.+ const times = frameTimes(50, 750);+ const late = [0, 45, 22, 0, 30, 50, 0, 20];+ const made = control(times, i => late[i % late.length]);+ const byStamp = timesByStamp(times, made);+ const frames = inPresentationOrder(made);+ // The stamps did reorder the frames.+ expect(+ frames.some(+ (frame, i) =>+ i > 0 && byStamp.get(frame.t)! < byStamp.get(frames[i - 1].t)!,+ ),+ ).toBe(true);+ const read = expectAnimationTimes(controlClock(frames), byStamp);+ expect(read.length).toBeGreaterThan(frames.length / 2);+ });++ it('reads the first usable frame and the next one right when a turn lies between them', () => {+ // At 338.3 ms the box is at 203 px on its way out, just inside the band.+ // The frames after it sit within 36 px of the end until 466.3 ms. There+ // the next usable frame is at 200.2 px, on its way back.+ const times = Array.from({length: 60}, (_, i) => 338 + 1 / 3 + i * 16);+ const frames = control(times);+ const clock = controlClock(frames);+ expect(clock.has(frames[0].t)).toBe(true);+ expect(frames.slice(1, 8).some(frame => clock.has(frame.t))).toBe(false);+ expect(clock.has(frames[8].t)).toBe(true);+ expectAnimationTimes(clock, timesByStamp(times, frames));+ });++ it('reads every frame at its own time when the first frame is stamped 50 ms late', () => {+ // The late first frame does not set the origin, so it moves no reading.+ const times = Array.from({length: 60}, (_, i) => 100 + i * 16);+ const frames = control(times, i => (i === 0 ? 50 : 0));+ const clock = controlClock(frames);+ expect(clock.has(frames[0].t)).toBe(true);+ expectAnimationTimes(clock, timesByStamp(times, frames));+ });++ it('gives no reading to a frame that repeats the position before it', () => {+ // The second frame shows the first frame's position, stamped a frame later.+ const frames = control([100, 100, 150], i => (i === 1 ? FRAME : 0));+ const clock = controlClock(frames);+ expect(clock.has(frames[1].t)).toBe(false);+ expect(clock.get(frames[2].t)! - clock.get(frames[0].t)!).toBeCloseTo(+ 50,+ 6,+ );+ });+});diff --git a/internal/interaction-harness/src/busy.ts b/internal/interaction-harness/src/busy.tsindex 58a20bf66a..4aeb24e04f 100644--- a/internal/interaction-harness/src/busy.ts+++ b/internal/interaction-harness/src/busy.ts@@ -11,6 +11,8 @@* read from its frames, `pooledBusyProof`, which judges several short* blocks as one, and `BusyWindowTooLateError`, for a block that began* after the motion it was meant to catch had ended.+ * `trackControl` and `controlClock` read the control's box and its own+ * clock from the screencast.* @position The busy-main-thread proof: an animation that runs on the* compositor keeps advancing at display rate while JavaScript holds the main* thread; one driven from the main thread (rAF, style writes, layout@@ -22,14 +24,45 @@import type {Locator, Page} from '@playwright/test';import {defineCurveEnd} from './curve-end';-import {frameStats, type FrameStats, type TrackedFrame} from './frames';+import {+ frameStats,+ trackMarker,+ type CastFrame,+ type FrameStats,+ type TrackedFrame,+} from './frames';/** The control's colour, apart from the component's marker (`MARKER_RGB`). */export const CONTROL_RGB: readonly [number, number, number] = [0, 255, 255];-/** The control box's side, and how far it travels along the top edge, CSS px. */-const CONTROL_SIDE = 12;+/**+ * The control box's side, CSS px: it crosses the page's top `CONTROL_SIDE` px,+ * where a proof reads nothing of the component.+ */+export const CONTROL_SIDE = 12;+/** How far the control travels along the top edge, CSS px. */const CONTROL_TRAVEL = 240;+/** How long the control takes to travel `CONTROL_TRAVEL` one way, ms. */+const CONTROL_LEG_MS = 400;++/**+ * The control in each frame (`startBusyControl`'s box): `trackMarker` with+ * `CONTROL_RGB`, searching only the strip the box crosses.+ */+export async function trackControl(+ page: Page,+ frames: readonly CastFrame[],+): Promise<TrackedFrame[]> {+ return trackMarker(page, frames, {+ rgb: CONTROL_RGB,+ region: {+ x: 0,+ y: 0,+ width: CONTROL_SIDE + CONTROL_TRAVEL + 4,+ height: CONTROL_SIDE + 4,+ },+ });+}/*** Starts a plain compositor-only control animation: a `CONTROL_RGB` box in the@@ -70,7 +103,7 @@ export async function startBusyControl();}await page.evaluate(- ({color, side, travel}) =>+ ({color, side, travel, legMs}) =>new Promise<void>((resolve, reject) => {const host = document.querySelector('[data-harness-control-host]');host?.removeAttribute('data-harness-control-host');@@ -90,7 +123,7 @@ export async function startBusyControl({transform: `translateX(${travel}px)`},],{- duration: 400,+ duration: legMs,iterations: Infinity,direction: 'alternate',easing: 'linear',@@ -131,7 +164,12 @@ export async function startBusyControl(};frame(tick);}),- {color: [...rgb], side: CONTROL_SIDE, travel: CONTROL_TRAVEL},+ {+ color: [...rgb],+ side: CONTROL_SIDE,+ travel: CONTROL_TRAVEL,+ legMs: CONTROL_LEG_MS,+ },);return {raise: () =>@@ -152,6 +190,94 @@ export async function startBusyControl(};}+/** How far a frame's stamp may run late and still agree with the others, ms. */+const CONTROL_AGREE_MS = 20;+/**+ * Frames this near a turn get no reading. There the two times that a position+ * gives are under 120 ms apart, and a stamp 60 ms late could pick either.+ */+const CONTROL_EDGE = 36;++/**+ * The compositor's clock in each frame of `control` (`startBusyControl`'s box,+ * tracked with `trackControl`), ms. The compositor samples every animation at+ * one time in a frame. So a component can be judged against this clock, not+ * the screencast's stamps. A loaded machine can stamp a frame late, and+ * `inPresentationOrder` then puts it after frames that it came before.+ *+ * The box's position gives two times a cycle, on the way out and on the way+ * back. The cycle's origin is the one that the most frames agree with, each+ * within `CONTROL_AGREE_MS` of one of its two times. So no single frame sets+ * it. Each frame's stamp, measured from that origin, then picks its own time.+ * A late or reordered frame moves only its own reading, and a gap moves none.+ *+ * A frame without the box gets no reading, and so does a frame within+ * `CONTROL_EDGE` px of a turn. A frame that repeats the position before it+ * shows no new time, so it gets none either. Readings count up from the+ * origin a whole cycle or less before the first reading.+ */+export function controlClock(+ control: readonly TrackedFrame[],+): Map<number, number> {+ const cycle = 2 * CONTROL_LEG_MS;+ const usable = control.flatMap((frame, i) => {+ const x = frame.box?.x;+ const before = i > 0 ? control[i - 1].box?.x : undefined;+ if (+ x == null ||+ x < CONTROL_EDGE ||+ x > CONTROL_TRAVEL - CONTROL_EDGE ||+ (before != null && Math.abs(x - before) <= 0.25)+ ) {+ return [];+ }+ const out = (x / CONTROL_TRAVEL) * CONTROL_LEG_MS;+ return [{t: frame.t, out, back: cycle - out}];+ });+ const clock = new Map<number, number>();+ if (usable.length === 0) {+ return clock;+ }+ const onCycle = (a: number, b: number) => {+ const d = Math.abs(a - b) % cycle;+ return Math.min(d, cycle - d);+ };+ let origin = 0;+ let agreeing = -1;+ let spread = Number.POSITIVE_INFINITY;+ for (let candidate = 0; candidate < cycle; candidate += 1) {+ let count = 0;+ let sum = 0;+ for (const frame of usable) {+ const phase = frame.t - candidate;+ const d = Math.min(onCycle(phase, frame.out), onCycle(phase, frame.back));+ if (d <= CONTROL_AGREE_MS) {+ count += 1;+ sum += d;+ }+ }+ if (count > agreeing || (count === agreeing && sum < spread)) {+ origin = candidate;+ agreeing = count;+ spread = sum;+ }+ }+ const first = Math.min(...usable.map(frame => frame.t));+ const anchored = origin + Math.floor((first - origin) / cycle) * cycle;+ for (const frame of usable) {+ const expected = frame.t - anchored;+ const nearest = (ms: number) =>+ ms + Math.round((expected - ms) / cycle) * cycle;+ const out = nearest(frame.out);+ const back = nearest(frame.back);+ clock.set(+ frame.t,+ Math.abs(out - expected) <= Math.abs(back - expected) ? out : back,+ );+ }+ return clock;+}+/** What the control presented in the judged part (see `busyWindowProof`). */export interface BusyControlRead {/** Frames in the judged part that presented a new control position. */diff --git a/internal/interaction-harness/src/frames.ts b/internal/interaction-harness/src/frames.tsindex 95ef1af5d6..bf61f337f8 100644--- a/internal/interaction-harness/src/frames.ts+++ b/internal/interaction-harness/src/frames.ts@@ -353,6 +353,8 @@ export function colorBlockPx(/*** Finds the marker in every frame. Decoding runs in a scratch page of the same* browser, so neither the page under test nor Node needs an image decoder.+ * With `region` (CSS px), only that part of each frame is searched. On a+ * loaded machine, a search of every pixel can take longer than the test.*/export async function trackMarker(page: Page,@@ -360,7 +362,12 @@ export async function trackMarker({rgb = MARKER_RGB,tolerance = 40,- }: {rgb?: readonly [number, number, number]; tolerance?: number} = {},+ region,+ }: {+ rgb?: readonly [number, number, number];+ tolerance?: number;+ region?: Box;+ } = {},): Promise<TrackedFrame[]> {const isDefaultMarker = rgb.every((value, i) => value === MARKER_RGB[i]);const scratch = await page.context().newPage();@@ -370,7 +377,7 @@ export async function trackMarker(for (let i = 0; i < frames.length; i += 12) {const batch = frames.slice(i, i + 12);const boxes = await scratch.evaluate(- async ({batch: items, color, tol}) => {+ async ({batch: items, color, tol, area}) => {const results: {box: {x: number; y: number; width: number; height: number} | null;pixels: number;@@ -387,11 +394,28 @@ export async function trackMarker(throw new Error('no 2d context');}context.drawImage(bitmap, 0, 0);+ const scale = bitmap.width / item.viewportWidth;+ const left = area == null ? 0 : Math.floor(area.x * scale);+ const top = area == null ? 0 : Math.floor(area.y * scale);+ const right =+ area == null+ ? bitmap.width+ : Math.min(+ bitmap.width,+ Math.ceil((area.x + area.width) * scale),+ );+ const bottom =+ area == null+ ? bitmap.height+ : Math.min(+ bitmap.height,+ Math.ceil((area.y + area.height) * scale),+ );const {data, width, height} = context.getImageData(- 0,- 0,- bitmap.width,- bitmap.height,+ left,+ top,+ right - left,+ bottom - top,);let minX = Infinity;let minY = Infinity;@@ -422,14 +446,13 @@ export async function trackMarker(}}}- const scale = width / item.viewportWidth;results.push({box:pixels === 0? null: {- x: minX / scale,- y: minY / scale,+ x: (left + minX) / scale,+ y: (top + minY) / scale,width: (maxX - minX + 1) / scale,height: (maxY - minY + 1) / scale,},@@ -447,6 +470,7 @@ export async function trackMarker(})),color: [...rgb],tol: tolerance,+ area: region ?? null,},);boxes.forEach((result, k) => {diff --git a/packages/core/src/motion/__tests__/animator.interaction.browser.spec.ts b/packages/core/src/motion/__tests__/animator.interaction.browser.spec.tsindex 33aaf74b9d..cd61062852 100644--- a/packages/core/src/motion/__tests__/animator.interaction.browser.spec.ts+++ b/packages/core/src/motion/__tests__/animator.interaction.browser.spec.ts@@ -27,6 +27,7 @@ import {type BlockedWindow,busyWindowProof,CONTROL_RGB,+ controlClock,countBetween,markElement,startBusyControl,@@ -38,7 +39,6 @@ import {expect, test, type Page} from '@astryxdesign/a11y-spec/playwright';import {build} from 'esbuild';import type {Animator, MotionHandle} from '../animator';import type * as MotionBundle from './motionBundle';-import {controlClock} from './controlClock';let script = '';@@ -221,18 +221,17 @@ test('a spring keeps advancing every frame through a 1 s main-thread block, on i},);const [curve, faster] = curveMs;- const controlAt = new Map(- control.flatMap(f => (f.box == null ? [] : [[f.t, f.box.x] as const])),- );// The control's own time at each frame (controlClock): 240 px out in// 400 ms, back in 400 ms, read from its position on the origin most frames// agree with, so no one frame's stamp or direction sets it.- const clock = controlClock(- inside.map(f => ({t: f.t, x: controlAt.get(f.t) ?? null})),- );+ const clock = controlClock(control);+ const timed = inside.flatMap((f, i) => {+ const ms = clock.get(f.t);+ return ms == null ? [] : [{i, ms}];+ });/** How far the box's curve time drifts from the control's, ms. */const drift = (times: number[]) => {- const gaps = clock.map(({i, ms}) => times[i] - ms).sort((x, y) => x - y);+ const gaps = timed.map(({i, ms}) => times[i] - ms).sort((x, y) => x - y);return (gaps[Math.floor(gaps.length * 0.9)] - gaps[Math.floor(gaps.length * 0.1)]);@@ -246,7 +245,7 @@ test('a spring keeps advancing every frame through a 1 s main-thread block, on isorted[Math.floor(sorted.length * 0.9)] -sorted[Math.floor(sorted.length * 0.1)];const read = {- frames: clock.length,+ frames: timed.length,drift: drift(curve),faster: drift(faster),median,@@ -258,7 +257,7 @@ test('a spring keeps advancing every frame through a 1 s main-thread block, on i});// Placed on its curve and on the control's, every frame is the same time// apart, to within the 1 px steps of both; a spring 10% off drifts.- expect(clock.length, JSON.stringify(read)).toBeGreaterThan(20);+ expect(timed.length, JSON.stringify(read)).toBeGreaterThan(20);expect(read.drift, JSON.stringify(read)).toBeLessThan(12);expect(read.faster, JSON.stringify(read)).toBeGreaterThan(24);if (browserName === 'chromium') {diff --git a/packages/core/src/motion/__tests__/controlClock.test.ts b/packages/core/src/motion/__tests__/controlClock.test.tsdeleted file mode 100644index ce26cbb48d..0000000000--- a/packages/core/src/motion/__tests__/controlClock.test.ts+++ /dev/null@@ -1,58 +0,0 @@-// Copyright (c) Meta Platforms, Inc. and affiliates.--import {describe, expect, it} from 'vitest';-import {controlClock} from './controlClock';--/** The control's x at its own time `ms`: 240 px out in 400 ms, back in 400. */-function controlX(ms: number): number {- const phase = ((ms % 800) + 800) % 800;- return phase < 400 ? phase * 0.6 : 240 - (phase - 400) * 0.6;-}--/**- * Frames 16 ms apart from the control's time `from`, stamped on a clock- * `offset` ms ahead of it; `late` adds lateness to chosen frames' stamps.- */-function frames(- from: number,- count: number,- offset: number,- late: ReadonlyMap<number, number> = new Map(),-) {- return Array.from({length: count}, (_, i) => {- const ms = from + i * 16;- return {t: ms + offset + (late.get(i) ?? 0), x: controlX(ms), ms};- });-}--/** How far each reading strays from the control's true time, past a constant. */-function strays(- run: ReadonlyArray<{ms: number}>,- clock: ReadonlyArray<{i: number; ms: number}>,-): number {- const gaps = clock.map(({i, ms}) => ms - run[i].ms).sort((a, b) => a - b);- return gaps[gaps.length - 1] - gaps[0];-}--describe('controlClock', () => {- it('reads every frame on the control’s own time on an even run', () => {- const run = frames(100, 60, 5_000);- const clock = controlClock(run);- expect(clock.length).toBeGreaterThan(40);- expect(strays(run, clock)).toBeLessThan(1e-6);- });-- it('reads every frame right when the first usable frame sits just inside the band on its way out and the next usable one comes after the turn', () => {- // x 214 on the way out (356.7 ms); the frames until 452.7 ms sit above- // the band, and the next usable one, at 208.4, is on the way back.- const run = frames(356 + 2 / 3, 60, 5_000);- const clock = controlClock(run);- expect(strays(run, clock)).toBeLessThan(1e-6);- });-- it('reads every other frame right when the first usable frame is stamped 50 ms late', () => {- const run = frames(100, 60, 5_000, new Map([[0, 50]]));- const clock = controlClock(run).filter(({i}) => i !== 0);- expect(strays(run, clock)).toBeLessThan(1e-6);- });-});diff --git a/packages/core/src/motion/__tests__/controlClock.ts b/packages/core/src/motion/__tests__/controlClock.tsdeleted file mode 100644index 641dd7e479..0000000000--- a/packages/core/src/motion/__tests__/controlClock.ts+++ /dev/null@@ -1,91 +0,0 @@-// Copyright (c) Meta Platforms, Inc. and affiliates.--/**- * @file controlClock.ts- * @input Screencast frames: each one's timestamp and the harness's control- * box's x on it (240 px out in 400 ms, back in 400 ms, repeating)- * @output Exports controlClock: the control's own time at each usable frame- * @position Test support for animator.interaction.browser.spec.ts, whose- * busy-window proof reads the spring against the control's clock- */--/** The control's speed, px per ms: 240 px in 400 ms. */-const SPEED = 0.6;-/** One out-and-back, ms. */-const CYCLE = 800;-/**- * Frames this near a turn are left out: there the two times a position- * gives are under 80 ms apart.- */-const EDGE = 24;--export interface ClockFrame {- readonly t: number;- readonly x: number | null;-}--/** How far a frame's stamp may run late and still agree with the others, ms. */-const AGREE = 20;--/** The distance between two times on the cycle, ms. */-function onCycle(a: number, b: number): number {- const d = Math.abs(a - b) % CYCLE;- return Math.min(d, CYCLE - d);-}--/**- * The control's time at each usable frame, by index into `frames`. Its- * position gives two times a cycle, on the way out and on the way back. The- * cycle's origin is the one the most frames agree with, each within AGREE ms- * of one of its two times, so no single frame sets it: a frame whose stamp- * runs late, or one whose direction its neighbors cannot tell (the next- * usable frame past a turn), moves only its own reading. Each frame's- * timestamp, measured from that origin, then picks its time.- */-export function controlClock(- frames: ReadonlyArray<ClockFrame>,-): {i: number; ms: number}[] {- const usable = frames.flatMap((f, i) =>- f.x == null || f.x < EDGE || f.x > 240 - EDGE- ? []- : [{i, t: f.t, out: f.x / SPEED, back: CYCLE - f.x / SPEED}],- );- if (usable.length === 0) {- return [];- }- let origin = 0;- let agreeing = -1;- let spread = Number.POSITIVE_INFINITY;- for (let candidate = 0; candidate < CYCLE; candidate++) {- let count = 0;- let sum = 0;- for (const u of usable) {- const phase = u.t - candidate;- const d = Math.min(onCycle(phase, u.out), onCycle(phase, u.back));- if (d <= AGREE) {- count += 1;- sum += d;- }- }- if (count > agreeing || (count === agreeing && sum < spread)) {- origin = candidate;- agreeing = count;- spread = sum;- }- }- // The same origin a whole number of cycles before the first frame, so the- // control's times count up from it.- const first = usable[0].t;- const anchored = origin + Math.floor((first - origin) / CYCLE) * CYCLE;- return usable.map(u => {- const expected = u.t - anchored;- const cycle = Math.round((expected - u.out) / CYCLE);- const candidates = [u.out, u.back, u.out + CYCLE, u.back - CYCLE].map(- ms => ms + cycle * CYCLE,- );- const ms = candidates.reduce((best, c) =>- Math.abs(c - expected) < Math.abs(best - expected) ? c : best,- );- return {i: u.i, ms};- });-}