Skip to content

An open source design system that's fully customizable and agent ready

TypeScript

docs: link v0.7.4 changesets to source PRs (#7970)

Cindy Zhangea7464dae5a7
diff --git a/.changeset/block-descriptions-what-its-for.md b/.changeset/block-descriptions-what-its-for.md
index 089822878f..cd464b9ee6 100644
--- a/.changeset/block-descriptions-what-its-for.md
+++ b/.changeset/block-descriptions-what-its-for.md
@@ -2,6 +2,6 @@
'@astryxdesign/cli': patch
---
-[docs] Four block templates (`MetadataListItemBasic`, `SegmentedControlItemBasic`, `VisuallyHiddenSupplementaryContext`, `ItemWithMetadata`) now describe what each one shows and when to use it, written from what the block renders.
+[docs] Four block templates (`MetadataListItemBasic`, `SegmentedControlItemBasic`, `VisuallyHiddenSupplementaryContext`, `ItemWithMetadata`) now describe what each one shows and when to use it, written from what the block renders. (#7963)
@josephfarina
diff --git a/.changeset/bottom-sheet-switcher-anatomy-sheet-dialogs.md b/.changeset/bottom-sheet-switcher-anatomy-sheet-dialogs.md
index 6d4c6c8538..7490be25af 100644
--- a/.changeset/bottom-sheet-switcher-anatomy-sheet-dialogs.md
+++ b/.changeset/bottom-sheet-switcher-anatomy-sheet-dialogs.md
@@ -2,6 +2,6 @@
'@astryxdesign/core': patch
---
-[docs] `BottomSheetSwitcher` anatomy names its host part `Sheet dialogs` — one native dialog per child sheet, the one hosting the active sheet carrying the flow's ref, id, modality, and dismissal — instead of `Shared dialog`.
+[docs] `BottomSheetSwitcher` anatomy names its host part `Sheet dialogs` — one native dialog per child sheet, the one hosting the active sheet carrying the flow's ref, id, modality, and dismissal — instead of `Shared dialog`. (#7720)
@imdreamrunner
diff --git a/.changeset/bottom-sheet-switcher-dialog-per-sheet.md b/.changeset/bottom-sheet-switcher-dialog-per-sheet.md
index 3caa7bdab3..3e6267bde7 100644
--- a/.changeset/bottom-sheet-switcher-dialog-per-sheet.md
+++ b/.changeset/bottom-sheet-switcher-dialog-per-sheet.md
@@ -2,7 +2,7 @@
'@astryxdesign/core': patch
---
-[feat] `BottomSheetSwitcher` presents each step in its own native `<dialog>`. Every child `BottomSheet` owns a dialog exactly like a standalone sheet; the switcher presents the selected sheet's dialog (`showModal()` with a scrim, `show()` without), keeps the previous sheet's dialog open and inert beneath the entering one through the handoff, and closes it once its panel has faded. One backdrop paints at a time: the retained dialog keeps the scrim until it closes, then the new dialog takes it over without a fade, so the page is never dimmed twice and the previous panel is never dimmed. Focus containment is the browser's own modal-dialog containment (as for `Dialog`) instead of a script trap; the page scroll lock (the shared body lock, held once by the switcher for the whole modal flow, through a handoff and until after the exit), Escape and platform-close routing, `purpose` dismissal rules, and focus return to the opener are unchanged. Going back to a sheet whose dialog is still fading closes and re-presents that dialog so the interactive sheet is the topmost layer again.
+[feat] `BottomSheetSwitcher` presents each step in its own native `<dialog>`. Every child `BottomSheet` owns a dialog exactly like a standalone sheet; the switcher presents the selected sheet's dialog (`showModal()` with a scrim, `show()` without), keeps the previous sheet's dialog open and inert beneath the entering one through the handoff, and closes it once its panel has faded. One backdrop paints at a time: the retained dialog keeps the scrim until it closes, then the new dialog takes it over without a fade, so the page is never dimmed twice and the previous panel is never dimmed. Focus containment is the browser's own modal-dialog containment (as for `Dialog`) instead of a script trap; the page scroll lock (the shared body lock, held once by the switcher for the whole modal flow, through a handoff and until after the exit), Escape and platform-close routing, `purpose` dismissal rules, and focus return to the opener are unchanged. Going back to a sheet whose dialog is still fading closes and re-presents that dialog so the interactive sheet is the topmost layer again. (#7720)
Public props, defaults, and exports are unchanged. Two observable details move with the structure. The switcher's `ref` resolves to the dialog hosting the flow — the active sheet's dialog, which changes on a handoff; the exiting sheet's through its exit; and, while the flow is closed, the dialog that hosted it last (or the first mounted sheet's) — instead of one persistent element; it is never `null` while a sheet is mounted, from the first commit on, and a callback ref's returned cleanup runs on each detach. `onCancel` and the forwarded dialog props apply to each sheet's dialog (a `role` given to the switcher included, except on a `required` step, which is an `alertdialog` as before), except `id` and `data-testid`, which render once, on the dialog the `ref` resolves to, from the first commit's synchronous re-render on; server markup of a flow that mounts closed carries them on no element (the shared dialog carried them). A non-modal flow orders its sheet dialogs inside a switcher-owned isolated wrapper that carries the one overlay value the shared dialog carried before.
diff --git a/.changeset/built-type-imports.md b/.changeset/built-type-imports.md
index 90007209c1..c87d6d2ec2 100644
--- a/.changeset/built-type-imports.md
+++ b/.changeset/built-type-imports.md
@@ -2,6 +2,6 @@
'@astryxdesign/cli': patch
---
-[fix] `astryx doctor --built` no longer counts a type-only Astryx import (`import type`, `import {type X}`, `export type … from`) as Astryx use, since the build erases it.
+[fix] `astryx doctor --built` no longer counts a type-only Astryx import (`import type`, `import {type X}`, `export type … from`) as Astryx use, since the build erases it. (#7945)
@josephfarina
diff --git a/.changeset/busy-fields-announce-their-busy-start.md b/.changeset/busy-fields-announce-their-busy-start.md
index 33b9bba090..07d54be329 100644
--- a/.changeset/busy-fields-announce-their-busy-start.md
+++ b/.changeset/busy-fields-announce-their-busy-start.md
@@ -2,6 +2,6 @@
'@astryxdesign/core': patch
---
-[fix] `TextInput`, `TextArea`, `Selector` and `MultiSelector` announce "Loading" once, politely, through the shared announcement channel when they become busy, and the Spinner they show while busy is hidden from assistive technology (`spec:AST-086` FR6, FR8). Before, the Spinner mounted as its own `role="status"` region already holding its name, which screen readers often skip, and it competed with the control's own `aria-busy` as a second owner of the same feedback. A rerender or StrictMode replay does not repeat the announcement; settling and becoming busy again announces again. Tests that found the busy Spinner with `getByRole('status', {name: 'Loading'})` should check the control's `aria-busy` instead.
+[fix] `TextInput`, `TextArea`, `Selector` and `MultiSelector` announce "Loading" once, politely, through the shared announcement channel when they become busy, and the Spinner they show while busy is hidden from assistive technology (`spec:AST-086` FR6, FR8). Before, the Spinner mounted as its own `role="status"` region already holding its name, which screen readers often skip, and it competed with the control's own `aria-busy` as a second owner of the same feedback. A rerender or StrictMode replay does not repeat the announcement; settling and becoming busy again announces again. Tests that found the busy Spinner with `getByRole('status', {name: 'Loading'})` should check the control's `aria-busy` instead. (#7920)
@cixzhang
diff --git a/.changeset/butter-reviewed-palette.md b/.changeset/butter-reviewed-palette.md
index ad40656b3e..b4851d540d 100644
--- a/.changeset/butter-reviewed-palette.md
+++ b/.changeset/butter-reviewed-palette.md
@@ -3,6 +3,6 @@
'@astryxdesign/cli': patch
---
-[feat] Keep Butter's released `butterPalettes` object byte-identical while moving the maintained Light/Dark theme to reviewed named palette stops. Signature Blue `#225BFF`, Butter Yellow `#FDEE8C`, and warm body surfaces remain exact; status fills move from success `#91D143` to `#7BBF7A`, warning `#FFC502` to `#DFCF5B`, error `#FC473B` to `#E56241`, and info `#4883FD` to `#4D82FF`. Info and error content changes from white to warm Neutral `#1D1C11`, the neutral Badge uses Blue `#194CE8`, and light TopNav items use Blue `#225BFF` / `#194CE8`; these palette-first pairs clear normal-text AA. Consumers that need the former appearance can extend `butterTheme` and override the affected color, syntax, shadow, and component values with their previous values. The CLI template ships the same private palette request, receipt, and runtime-sized references.
+[feat] Keep Butter's released `butterPalettes` object byte-identical while moving the maintained Light/Dark theme to reviewed named palette stops. Signature Blue `#225BFF`, Butter Yellow `#FDEE8C`, and warm body surfaces remain exact; status fills move from success `#91D143` to `#7BBF7A`, warning `#FFC502` to `#DFCF5B`, error `#FC473B` to `#E56241`, and info `#4883FD` to `#4D82FF`. Info and error content changes from white to warm Neutral `#1D1C11`, the neutral Badge uses Blue `#194CE8`, and light TopNav items use Blue `#225BFF` / `#194CE8`; these palette-first pairs clear normal-text AA. Consumers that need the former appearance can extend `butterTheme` and override the affected color, syntax, shadow, and component values with their previous values. The CLI template ships the same private palette request, receipt, and runtime-sized references. (#7672)
@rubyycheung
diff --git a/.changeset/carousel-edge-focus-scroll-area.md b/.changeset/carousel-edge-focus-scroll-area.md
index 299e81f46b..0f27df314f 100644
--- a/.changeset/carousel-edge-focus-scroll-area.md
+++ b/.changeset/carousel-edge-focus-scroll-area.md
@@ -2,6 +2,6 @@
'@astryxdesign/core': patch
---
-[fix] Carousel: when the focused edge scroll button runs out (the carousel reached that edge), focus now moves to the scroll area without scrolling it, instead of to the opposite scroll button. This follows the Carousel record (`component:Carousel` FR2) and spec:AST-085 FR4. No API changes.
+[fix] Carousel: when the focused edge scroll button runs out (the carousel reached that edge), focus now moves to the scroll area without scrolling it, instead of to the opposite scroll button. This follows the Carousel record (`component:Carousel` FR2) and spec:AST-085 FR4. No API changes. (#7926)
@cixzhang
diff --git a/.changeset/checkbox-busy-announces-once.md b/.changeset/checkbox-busy-announces-once.md
index 3c6547bc5a..8c7f3126ee 100644
--- a/.changeset/checkbox-busy-announces-once.md
+++ b/.changeset/checkbox-busy-announces-once.md
@@ -2,6 +2,6 @@
'@astryxdesign/core': patch
---
-[fix] `CheckboxInput` announces its busy start ("Loading") once, politely, through the shared announcement channel (`spec:AST-086` FR6, FR8). The Spinner it shows in place of the check mark while busy sits inside the decorative, hidden indicator, so before this nothing told screen-reader users that the checkbox had become busy beyond its `aria-busy`. Inside an open modal dialog the announcement goes to a status region in the dialog.
+[fix] `CheckboxInput` announces its busy start ("Loading") once, politely, through the shared announcement channel (`spec:AST-086` FR6, FR8). The Spinner it shows in place of the check mark while busy sits inside the decorative, hidden indicator, so before this nothing told screen-reader users that the checkbox had become busy beyond its `aria-busy`. Inside an open modal dialog the announcement goes to a status region in the dialog. (#7948)
@cixzhang
diff --git a/.changeset/cli-bottom-sheet-switcher-template-docs.md b/.changeset/cli-bottom-sheet-switcher-template-docs.md
index 87910e6d73..01644d228a 100644
--- a/.changeset/cli-bottom-sheet-switcher-template-docs.md
+++ b/.changeset/cli-bottom-sheet-switcher-template-docs.md
@@ -2,6 +2,6 @@
'@astryxdesign/cli': patch
---
-[docs] The `BottomSheetSwitcher` template docs (`BottomSheetSwitcherShowcase`, `BottomSheetSwitcherReviewFlow`) describe each step as its own native dialog under one scrim, as the component now renders, instead of "one shared dialog".
+[docs] The `BottomSheetSwitcher` template docs (`BottomSheetSwitcherShowcase`, `BottomSheetSwitcherReviewFlow`) describe each step as its own native dialog under one scrim, as the component now renders, instead of "one shared dialog". (#7720)
@imdreamrunner
diff --git a/.changeset/cli-doc-stability-field.md b/.changeset/cli-doc-stability-field.md
index f77fa482c2..95ce764d98 100644
--- a/.changeset/cli-doc-stability-field.md
+++ b/.changeset/cli-doc-stability-field.md
@@ -2,6 +2,6 @@
'@astryxdesign/cli': patch
---
-[feat] Docs can mark an experimental surface: every doc type except `ThemeDoc` and `IconSetDoc`, and every schema field and enum value, accepts `stability: 'experimental'`. A marked command shows `[experimental]` in help, a marked schema field or enum value is left out of its stable table so its feature's own docs describe it, and `astryx search` leaves out a marked doc, which is read on its own route. For the package being authored, `doctor integration validate` (and so `integration check`) adds `olderCliNotes`, each `{file, kind, field, message}`: a template or namespace doc that sets `stability`, or a template that declares `icons`, while the package's CLI peer range admits a release before 0.7.4, which drops that descriptor. A note is never an error or a warning and never fails a check, under `--strict` or `--next`; text output prints "Notes for older CLIs". Docs and findings that use none of these read exactly as before.
+[feat] Docs can mark an experimental surface: every doc type except `ThemeDoc` and `IconSetDoc`, and every schema field and enum value, accepts `stability: 'experimental'`. A marked command shows `[experimental]` in help, a marked schema field or enum value is left out of its stable table so its feature's own docs describe it, and `astryx search` leaves out a marked doc, which is read on its own route. For the package being authored, `doctor integration validate` (and so `integration check`) adds `olderCliNotes`, each `{file, kind, field, message}`: a template or namespace doc that sets `stability`, or a template that declares `icons`, while the package's CLI peer range admits a release before 0.7.4, which drops that descriptor. A note is never an error or a warning and never fails a check, under `--strict` or `--next`; text output prints "Notes for older CLIs". Docs and findings that use none of these read exactly as before. (#7759)
@josephfarina
diff --git a/.changeset/cli-icon-sets.md b/.changeset/cli-icon-sets.md
index 297448dac4..70bd83de16 100644
--- a/.changeset/cli-icon-sets.md
+++ b/.changeset/cli-icon-sets.md
@@ -2,7 +2,7 @@
'@astryxdesign/cli': patch
---
-[experimental] Icon sets: an integration can ship an icon set, agents find icons by meaning and get the exact import line, and copied templates use the project's icons. Everything here is experimental and may change or be removed in a patch release; a project that does not set `experimental.iconSet` sees no change in any stable command, apart from: the marked `experimental` group in help and in `astryx manifest` (its command, and its `responseTypes` and `jsonSupported` entries); the marked experimental entries in the `astryx docs cli` listings; and a search for "experimental", which also finds the new stable `stability` field of the field reference. `astryx search` returns no icon and no experimental doc. With a package that ships icon sets installed and no opt-in, the warnings an older CLI gives about the manifest key `experimental` (in `astryx doctor` and `astryx doctor integration validate <package>`, and the one-line nudge other commands print to stderr) are gone, and `doctor integration` checks that package's icon sets only in a project that sets `experimental.iconSet`; and `astryx integration check` reports icon-set findings for a package that declares `experimental.iconSets` (below).
+[experimental] Icon sets: an integration can ship an icon set, agents find icons by meaning and get the exact import line, and copied templates use the project's icons. Everything here is experimental and may change or be removed in a patch release; a project that does not set `experimental.iconSet` sees no change in any stable command, apart from: the marked `experimental` group in help and in `astryx manifest` (its command, and its `responseTypes` and `jsonSupported` entries); the marked experimental entries in the `astryx docs cli` listings; and a search for "experimental", which also finds the new stable `stability` field of the field reference. `astryx search` returns no icon and no experimental doc. With a package that ships icon sets installed and no opt-in, the warnings an older CLI gives about the manifest key `experimental` (in `astryx doctor` and `astryx doctor integration validate <package>`, and the one-line nudge other commands print to stderr) are gone, and `doctor integration` checks that package's icon sets only in a project that sets `experimental.iconSet`; and `astryx integration check` reports icon-set findings for a package that declares `experimental.iconSets` (below). (#7759)
- **Commands.** The new `astryx experimental` group holds experimental commands; icon sets are its first. `astryx experimental icon <words>` ranks icons across the installed sets (`icon.search`), `<set>/<id>` reads one icon with every variant's import line (`icon.detail`), and `--list` lists each set with its definition coverage (`icon.list`). Authoring: `experimental icon new-set <name>` starts a set (`--from <module>` wraps every icon a library exports, `--exclude` drops exports that are not icons), `experimental icon new-definition <name>` adds a set's own icon definition, `experimental icon add <Export> --from <module>` verifies an export and lists the definitions that fit it or adds and maps it (`--variant <name>` adds it as a variant the set declares, a named look such as solid; size comes from CSS), `experimental icon map <definition> <icon>` edits one map entry, and `experimental icon use <set>` picks the project's set. The API gains `icon`, `iconAdd`, `iconMap`, `iconUse`, `iconNewSet`, and `iconNewDefinition`, all marked `@experimental`.
- **Configuration.** The project's set is `experimental.iconSet` in astryx.config; an integration declares its sets folder as `experimental.iconSets` in its manifest. Each set has a typed `<name>.doc.mjs` (`IconSetDoc`), a `<name>.icons.json` data file, and an optional `definitions/` folder; `@astryxdesign/cli/authoring` exports `IconSetDoc`, `IconSetData`, `IconDefinitionDoc`, and their parsers. An older CLI warns that `experimental` is a manifest key it does not know, and a CLI before 0.7.4 refuses an astryx.config that sets `experimental.iconSet` ("Unrecognized key"), so commands that load the project configuration, such as `doctor` and `discover`, fail in that project; `astryx experimental icon use` says so in its receipt (`warning`) when the project's `@astryxdesign/cli` range admits such a release.
diff --git a/.changeset/command-palette-item-showcase-description.md b/.changeset/command-palette-item-showcase-description.md
index 7103726d0c..e1e20faad5 100644
--- a/.changeset/command-palette-item-showcase-description.md
+++ b/.changeset/command-palette-item-showcase-description.md
@@ -2,6 +2,6 @@
'@astryxdesign/cli': patch
---
-[docs] The `CommandPaletteItem` showcase block now describes what it renders, an inline command palette whose items pair each label with its keyboard shortcut, and lists only the components it uses.
+[docs] The `CommandPaletteItem` showcase block now describes what it renders, an inline command palette whose items pair each label with its keyboard shortcut, and lists only the components it uses. (#7967)
@cixzhang
diff --git a/.changeset/command-palette-item-theme-states.md b/.changeset/command-palette-item-theme-states.md
index 7a4e8f7749..631e246730 100644
--- a/.changeset/command-palette-item-theme-states.md
+++ b/.changeset/command-palette-item-theme-states.md
@@ -2,6 +2,6 @@
'@astryxdesign/core': patch
---
-[fix] `CommandPaletteItem` now reflects its highlighted, selected, and disabled states on the `command-palette-item` theme target as `data-highlighted="highlighted"`, `data-selected="selected"`, and `data-disabled="disabled"`. A theme can now style the active keyboard result, the chosen value, or an unavailable command, for example `.astryx-command-palette-item[data-selected]`. States derived from CommandPalette are reflected too. Rendering, semantics, and props are unchanged.
+[fix] `CommandPaletteItem` now reflects its highlighted, selected, and disabled states on the `command-palette-item` theme target as `data-highlighted="highlighted"`, `data-selected="selected"`, and `data-disabled="disabled"`. A theme can now style the active keyboard result, the chosen value, or an unavailable command, for example `.astryx-command-palette-item[data-selected]`. States derived from CommandPalette are reflected too. Rendering, semantics, and props are unchanged. (#7967)
@cixzhang
diff --git a/.changeset/commandpalette-busy-in-dialog.md b/.changeset/commandpalette-busy-in-dialog.md
index 7e4cd1763a..482ed09e21 100644
--- a/.changeset/commandpalette-busy-in-dialog.md
+++ b/.changeset/commandpalette-busy-in-dialog.md
@@ -2,6 +2,6 @@
'@astryxdesign/core': patch
---
-[fix] `CommandPalette` announces each busy start ("Loading"), including its load on opening or clearing the query, once from a status region inside its dialog, and its search Spinner is hidden from assistive technology (`spec:AST-086` FR3, FR8). Before, the Spinner mounted as its own `role="status"` region already named "Loading", and the palette's own "Loading" went to the page-level announcement channel, which an open native modal hides from assistive technology. Result-count announcements are unchanged. Tests that found the Spinner with `getByRole('status')` should query the Spinner element instead.
+[fix] `CommandPalette` announces each busy start ("Loading"), including its load on opening or clearing the query, once from a status region inside its dialog, and its search Spinner is hidden from assistive technology (`spec:AST-086` FR3, FR8). Before, the Spinner mounted as its own `role="status"` region already named "Loading", and the palette's own "Loading" went to the page-level announcement channel, which an open native modal hides from assistive technology. Result-count announcements are unchanged. Tests that found the Spinner with `getByRole('status')` should query the Spinner element instead. (#7956)
@cixzhang
diff --git a/.changeset/date-input-busy-paint.md b/.changeset/date-input-busy-paint.md
index c670e25688..521bf92d01 100644
--- a/.changeset/date-input-busy-paint.md
+++ b/.changeset/date-input-busy-paint.md
@@ -2,6 +2,6 @@
'@astryxdesign/core': patch
---
-[fix] A busy `DateInput` (`isLoading`, or a pending `changeAction`) no longer looks disabled. On the popover, native, and bottom-sheet surfaces the field keeps its ordinary paint and shows its Spinner while new commits are blocked; only `isDisabled` dims the field. The busy field still takes no hover ring and keeps its keyboard focus ring. Props, semantics, and announcements are unchanged.
+[fix] A busy `DateInput` (`isLoading`, or a pending `changeAction`) no longer looks disabled. On the popover, native, and bottom-sheet surfaces the field keeps its ordinary paint and shows its Spinner while new commits are blocked; only `isDisabled` dims the field. The busy field still takes no hover ring and keeps its keyboard focus ring. Props, semantics, and announcements are unchanged. (#7968)
@cixzhang
diff --git a/.changeset/date-inputs-busy-announces-once.md b/.changeset/date-inputs-busy-announces-once.md
index 154c9f3168..34506ec9d2 100644
--- a/.changeset/date-inputs-busy-announces-once.md
+++ b/.changeset/date-inputs-busy-announces-once.md
@@ -2,6 +2,6 @@
'@astryxdesign/core': patch
---
-[fix] `DateInput` (popover, native and bottom-sheet presentations) and `DateRangeInput` announce their busy start ("Loading") once, politely, through the shared announcement channel, and the Spinner they show while busy is hidden from assistive technology (`spec:AST-086` FR6, FR8). Before, that Spinner mounted as its own `role="status"` region already named "Loading", which screen readers often skip, and it was a second owner beside the field's `aria-busy`. Inside an open modal dialog the announcement goes to a status region in the dialog. Tests that found the busy Spinner with `getByRole('status', {name: 'Loading'})` should check the field's `aria-busy` instead.
+[fix] `DateInput` (popover, native and bottom-sheet presentations) and `DateRangeInput` announce their busy start ("Loading") once, politely, through the shared announcement channel, and the Spinner they show while busy is hidden from assistive technology (`spec:AST-086` FR6, FR8). Before, that Spinner mounted as its own `role="status"` region already named "Loading", which screen readers often skip, and it was a second owner beside the field's `aria-busy`. Inside an open modal dialog the announcement goes to a status region in the dialog. Tests that found the busy Spinner with `getByRole('status', {name: 'Loading'})` should check the field's `aria-busy` instead. (#7939)
@cixzhang
diff --git a/.changeset/datetime-time-inputs-busy-announces-once.md b/.changeset/datetime-time-inputs-busy-announces-once.md
index b97040a37e..769ee38198 100644
--- a/.changeset/datetime-time-inputs-busy-announces-once.md
+++ b/.changeset/datetime-time-inputs-busy-announces-once.md
@@ -2,6 +2,6 @@
'@astryxdesign/core': patch
---
-[fix] `DateTimeInput` and `TimeInput` (popover, native and bottom-sheet presentations) announce their busy start ("Loading") once, politely, through the shared announcement channel, and the Spinner they show while busy is hidden from assistive technology (`spec:AST-086` FR6, FR8). Before, that Spinner mounted as its own `role="status"` region already named "Loading", which screen readers often skip, and it was a second owner beside the field's `aria-busy`. A change made inside the open bottom sheet under a pending `changeAction` is announced from inside the sheet. Tests that found the busy Spinner with `getByRole('status', {name: 'Loading'})` should check the field's `aria-busy` instead.
+[fix] `DateTimeInput` and `TimeInput` (popover, native and bottom-sheet presentations) announce their busy start ("Loading") once, politely, through the shared announcement channel, and the Spinner they show while busy is hidden from assistive technology (`spec:AST-086` FR6, FR8). Before, that Spinner mounted as its own `role="status"` region already named "Loading", which screen readers often skip, and it was a second owner beside the field's `aria-busy`. A change made inside the open bottom sheet under a pending `changeAction` is announced from inside the sheet. Tests that found the busy Spinner with `getByRole('status', {name: 'Loading'})` should check the field's `aria-busy` instead. (#7942)
@cixzhang
diff --git a/.changeset/discover-provenance-and-typo-tolerance.md b/.changeset/discover-provenance-and-typo-tolerance.md
index 9928e6ff4a..f55e62a386 100644
--- a/.changeset/discover-provenance-and-typo-tolerance.md
+++ b/.changeset/discover-provenance-and-typo-tolerance.md
@@ -2,7 +2,7 @@
'@astryxdesign/cli': patch
---
-[fix] Discover results name their source package and tolerate typos.
+[fix] Discover results name their source package and tolerate typos. (#7147)
@josephfarina
diff --git a/.changeset/doc-syntax.md b/.changeset/doc-syntax.md
index 4f204e616e..a2c0fc99c0 100644
--- a/.changeset/doc-syntax.md
+++ b/.changeset/doc-syntax.md
@@ -2,7 +2,7 @@
'@astryxdesign/cli': patch
---
-[feat] Docs can write commands so every reader sees their own: `{@command docs theme}` for an Astryx command, `{@pm install @acme/widgets --dev}` for a package-manager step, and `{@pm-only npm "<reason>" pkg set name=x}` for a step only one package manager can do. The CLI shows each one with the reader's runner and package manager (npm, pnpm, Yarn 1, Yarn 2 and newer, or Bun), and `{@@…}` shows a token as written. `astryx docs authoring/building-blocks/docs/doc-syntax` documents them. `doctor integration validate` lists each command a topic writes for one package manager (`package_manager_command`), bare (`plain_command`) or with a runner (`runner_command`), and each token that does not parse (`doc_token`), each with the token to write.
+[feat] Docs can write commands so every reader sees their own: `{@command docs theme}` for an Astryx command, `{@pm install @acme/widgets --dev}` for a package-manager step, and `{@pm-only npm "<reason>" pkg set name=x}` for a step only one package manager can do. The CLI shows each one with the reader's runner and package manager (npm, pnpm, Yarn 1, Yarn 2 and newer, or Bun), and `{@@…}` shows a token as written. `astryx docs authoring/building-blocks/docs/doc-syntax` documents them. `doctor integration validate` lists each command a topic writes for one package manager (`package_manager_command`), bare (`plain_command`) or with a runner (`runner_command`), and each token that does not parse (`doc_token`), each with the token to write. (#7868)
`integration check --next` counts the findings the next minor release turns into warnings, the notes marked `next`, as warnings now, so `--strict --next` fails on them. Every run says how many there are. Without `--next`, `integration check --strict` exits as before.
diff --git a/.changeset/docs-replace-extend-placed-guides.md b/.changeset/docs-replace-extend-placed-guides.md
index 35825ce262..19c3afbbc0 100644
--- a/.changeset/docs-replace-extend-placed-guides.md
+++ b/.changeset/docs-replace-extend-placed-guides.md
@@ -2,6 +2,6 @@
'@astryxdesign/cli': patch
---
-[feat] An integration's doc can now replace or extend one of the CLI's guides by its route, such as `replaces: 'authoring/quick-start'` or `extends: 'authoring/quick-start'`, so a package changes the guide agents already read for every app that installs it. An extension's section can set `before` or `after` to a section's key to go there instead of at the end; an older CLI rejects those fields, so `integration verify` warns when the package's `@astryxdesign/cli` peer range admits one. Every read names the replacing or extending package: `package` on the guide and on each section, and a replaced topic or guide now also carries `replacedPackage` beside `replaces` (in `docs`, `docs --index`, the topic list, and a namespace's children), with a `replaces <package>'s <topic>` line in text. A name that holds no topic or guide (such as a namespace) changes nothing, and a `before` or `after` key that names no section adds the section at the end: `integration validate` lists each as a note (`doc_target_not_found`, `doc_section_unplaced`), and two docs of one package that replace one guide as `duplicate_guide_replacement`; none fails anything until the next minor release.
+[feat] An integration's doc can now replace or extend one of the CLI's guides by its route, such as `replaces: 'authoring/quick-start'` or `extends: 'authoring/quick-start'`, so a package changes the guide agents already read for every app that installs it. An extension's section can set `before` or `after` to a section's key to go there instead of at the end; an older CLI rejects those fields, so `integration verify` warns when the package's `@astryxdesign/cli` peer range admits one. Every read names the replacing or extending package: `package` on the guide and on each section, and a replaced topic or guide now also carries `replacedPackage` beside `replaces` (in `docs`, `docs --index`, the topic list, and a namespace's children), with a `replaces <package>'s <topic>` line in text. A name that holds no topic or guide (such as a namespace) changes nothing, and a `before` or `after` key that names no section adds the section at the end: `integration validate` lists each as a note (`doc_target_not_found`, `doc_section_unplaced`), and two docs of one package that replace one guide as `duplicate_guide_replacement`; none fails anything until the next minor release. (#7936)
@josephfarina
diff --git a/.changeset/docs-tidy-titles.md b/.changeset/docs-tidy-titles.md
index a830aaf13e..d6a15f5483 100644
--- a/.changeset/docs-tidy-titles.md
+++ b/.changeset/docs-tidy-titles.md
@@ -2,6 +2,6 @@
'@astryxdesign/cli': patch
---
-[docs] Six guide titles read more plainly and use the same sentence case as the rest: Theme System is now Theming, Styling Components is Styling components, Browser Support is Browser support, Migration Guide is Migration, Styling Library Interop is Other styling libraries, and Looking up components is Component lookups. Only the titles changed: every route still opens the same doc (`astryx docs theme`, `astryx docs styling-libraries`, `astryx docs cli/component-lookups`), and searching by an old title still finds it.
+[docs] Six guide titles read more plainly and use the same sentence case as the rest: Theme System is now Theming, Styling Components is Styling components, Browser Support is Browser support, Migration Guide is Migration, Styling Library Interop is Other styling libraries, and Looking up components is Component lookups. Only the titles changed: every route still opens the same doc (`astryx docs theme`, `astryx docs styling-libraries`, `astryx docs cli/component-lookups`), and searching by an old title still finds it. (#7934)
@josephfarina
diff --git a/.changeset/doctor-built.md b/.changeset/doctor-built.md
index 392a974568..cf0fe4d01c 100644
--- a/.changeset/doctor-built.md
+++ b/.changeset/doctor-built.md
@@ -2,6 +2,6 @@
'@astryxdesign/cli': patch
---
-[feat] `astryx doctor --built <path>` checks a finished build before you deliver it: a project folder, a build output folder, or one built HTML file. `built-astryx-usage` fails when the path holds no import from an Astryx package (any `@astryxdesign/*` package, or an integration the project installs: a declared dependency whose installed copy has an integration manifest), no component imported from one, and no Astryx styles in built CSS or HTML, and names the template-first way to rebuild it. `built-astryx-purity` warns with the source check of `astryx docs is-my-code-good`: raw elements Astryx has a component for, raw SVG and icon-library icons, inline styles, classes, `stylex.create` and imported stylesheets, each with its file and line, or says the source was not inspected when the path holds no source with JSX, such as a bundle. The files under the path and that package.json are only read; nothing in them runs. Without `--built`, `astryx doctor` runs exactly as before.
+[feat] `astryx doctor --built <path>` checks a finished build before you deliver it: a project folder, a build output folder, or one built HTML file. `built-astryx-usage` fails when the path holds no import from an Astryx package (any `@astryxdesign/*` package, or an integration the project installs: a declared dependency whose installed copy has an integration manifest), no component imported from one, and no Astryx styles in built CSS or HTML, and names the template-first way to rebuild it. `built-astryx-purity` warns with the source check of `astryx docs is-my-code-good`: raw elements Astryx has a component for, raw SVG and icon-library icons, inline styles, classes, `stylex.create` and imported stylesheets, each with its file and line, or says the source was not inspected when the path holds no source with JSX, such as a bundle. The files under the path and that package.json are only read; nothing in them runs. Without `--built`, `astryx doctor` runs exactly as before. (#7886)
@josephfarina
diff --git a/.changeset/fileinput-busy-announces-once.md b/.changeset/fileinput-busy-announces-once.md
index b4300a9d93..ecfa4d9890 100644
--- a/.changeset/fileinput-busy-announces-once.md
+++ b/.changeset/fileinput-busy-announces-once.md
@@ -2,6 +2,6 @@
'@astryxdesign/core': patch
---
-[fix] `FileInput` announces its busy start ("Loading") once, politely, through the shared announcement channel, and the Spinner it shows while busy is hidden from assistive technology (`spec:AST-086` FR6, FR8). Before, that Spinner mounted as its own `role="status"` region already named "Loading", which screen readers often skip. A file pick keeps its single "file selected" announcement, because it is one user action, even when it starts a busy period (`changeAction`, or `isLoading` set from `onChange`). Other busy starts, such as `isLoading` on its own or a clear under `changeAction`, announce "Loading". Inside an open modal dialog the announcement goes to a status region in the dialog. Tests that found the busy Spinner with `getByRole('status', {name: 'Loading'})` should check the field's `aria-busy` instead.
+[fix] `FileInput` announces its busy start ("Loading") once, politely, through the shared announcement channel, and the Spinner it shows while busy is hidden from assistive technology (`spec:AST-086` FR6, FR8). Before, that Spinner mounted as its own `role="status"` region already named "Loading", which screen readers often skip. A file pick keeps its single "file selected" announcement, because it is one user action, even when it starts a busy period (`changeAction`, or `isLoading` set from `onChange`). Other busy starts, such as `isLoading` on its own or a clear under `changeAction`, announce "Loading". Inside an open modal dialog the announcement goes to a status region in the dialog. Tests that found the busy Spinner with `getByRole('status', {name: 'Loading'})` should check the field's `aria-busy` instead. (#7954)
@cixzhang
diff --git a/.changeset/gothic-reviewed-palette.md b/.changeset/gothic-reviewed-palette.md
index f727f31b04..bc3ba29e09 100644
--- a/.changeset/gothic-reviewed-palette.md
+++ b/.changeset/gothic-reviewed-palette.md
@@ -3,6 +3,6 @@
'@astryxdesign/cli': patch
---
-[feat] Keep Gothic's released flat `gothicPalettes` compatibility export unchanged while moving the maintained dark theme to a reproducible generated palette and named stop mappings. The card changes from `#1A1D20` to `#191D20`; Gray background and border from `#3D4248` / `#5D646B` to `#3E454B` / `#5E676E`; syntax comment and punctuation from `#6B7079` / `#7A8290` to `#7E8791` / `#7E8791`; and diff backgrounds from `#081408` / `#1E0A0A` to `#071607` / `#220806`. Success, warning, and error inset rings move from `#87B06A50` / `#D6B56A50` / `#D4485150` to `#869B7250` / `#D3C49050` / `#C6A6A250`. Yellow text moves from `#6C5010` to `#573F0B`, and Pink text from `#71223C` to `#5C182F`; both darker named stops clear 4.5:1 on their categorical surfaces. Consumers that need the former appearance can extend `gothicTheme` and override these color, syntax, shadow, and component tokens with their previous values. The CLI template ships the same request, receipt, and runtime-sized references.
+[feat] Keep Gothic's released flat `gothicPalettes` compatibility export unchanged while moving the maintained dark theme to a reproducible generated palette and named stop mappings. The card changes from `#1A1D20` to `#191D20`; Gray background and border from `#3D4248` / `#5D646B` to `#3E454B` / `#5E676E`; syntax comment and punctuation from `#6B7079` / `#7A8290` to `#7E8791` / `#7E8791`; and diff backgrounds from `#081408` / `#1E0A0A` to `#071607` / `#220806`. Success, warning, and error inset rings move from `#87B06A50` / `#D6B56A50` / `#D4485150` to `#869B7250` / `#D3C49050` / `#C6A6A250`. Yellow text moves from `#6C5010` to `#573F0B`, and Pink text from `#71223C` to `#5C182F`; both darker named stops clear 4.5:1 on their categorical surfaces. Consumers that need the former appearance can extend `gothicTheme` and override these color, syntax, shadow, and component tokens with their previous values. The CLI template ships the same request, receipt, and runtime-sized references. (#7670)
@rubyycheung
diff --git a/.changeset/integration-examples.md b/.changeset/integration-examples.md
index bb57f6e9f6..94a648f2bd 100644
--- a/.changeset/integration-examples.md
+++ b/.changeset/integration-examples.md
@@ -2,7 +2,7 @@
'@astryxdesign/cli': patch
---
-[feat] `doctor integration validate`, and so `integration check`, lists what a package's examples need to work everywhere they are shown, as notes for the next minor release (`integration check --strict --next` fails on them now):
+[feat] `doctor integration validate`, and so `integration check`, lists what a package's examples need to work everywhere they are shown, as notes for the next minor release (`integration check --strict --next` fails on them now): (#7891)
- `component_without_example`: a published component that no block template shows with `exampleFor: '<Name>'` and `isShowcase: true` (or `alsoShowcaseFor`). A block named like a showcase that sets neither does not count. Hidden docs, family members, docs with `isHiddenFromOverview` and `Utility` components are exempt. The note carries a template doc to paste.
- `template_category`: a template `category` written as a path, such as `components/X`, with a `"<Group> - <Variant>"` one to write.
diff --git a/.changeset/matcha-reviewed-palette.md b/.changeset/matcha-reviewed-palette.md
index d89f6878fa..fdf0e77674 100644
--- a/.changeset/matcha-reviewed-palette.md
+++ b/.changeset/matcha-reviewed-palette.md
@@ -3,6 +3,6 @@
'@astryxdesign/cli': patch
---
-[feat] Move Matcha's existing color roles onto its reviewed light and dark ramps, including Tea Gold. Warning and Yellow move from `#FFB600` / `#FFC940` to `#F2C000` / `#F6D066`; related syntax colors and warning inset rings follow the same palette. Consumers that need the former appearance can extend `matchaTheme` and override the affected color, syntax, shadow, and component tokens with their previous values. The complete Matcha palette remains private authoring data, and the CLI template ships the same request, receipt, and runtime-sized references.
+[feat] Move Matcha's existing color roles onto its reviewed light and dark ramps, including Tea Gold. Warning and Yellow move from `#FFB600` / `#FFC940` to `#F2C000` / `#F6D066`; related syntax colors and warning inset rings follow the same palette. Consumers that need the former appearance can extend `matchaTheme` and override the affected color, syntax, shadow, and component tokens with their previous values. The complete Matcha palette remains private authoring data, and the CLI template ships the same request, receipt, and runtime-sized references. (#7671)
@rubyycheung
diff --git a/.changeset/menu-press-shadow-root.md b/.changeset/menu-press-shadow-root.md
index a4a06913c3..d915fcf41b 100644
--- a/.changeset/menu-press-shadow-root.md
+++ b/.changeset/menu-press-shadow-root.md
@@ -2,6 +2,6 @@
'@astryxdesign/core': patch
---
-[fix] Selector, DropdownMenu and ContextMenu: clicking an option inside a shadow root (open, closed or nested) selects it. The menus used to read the document's view of the click, which names the shadow host, so the click closed the menu without selecting anything.
+[fix] Selector, DropdownMenu and ContextMenu: clicking an option inside a shadow root (open, closed or nested) selects it. The menus used to read the document's view of the click, which names the shadow host, so the click closed the menu without selecting anything. (#7914)
@cixzhang
diff --git a/.changeset/palette-receipt-versions.md b/.changeset/palette-receipt-versions.md
index 9424d8b3ca..2efa727765 100644
--- a/.changeset/palette-receipt-versions.md
+++ b/.changeset/palette-receipt-versions.md
@@ -2,6 +2,6 @@
'@astryxdesign/cli': patch
---
-[feat] `astryx theme palette generate` receipts now name the generator implementation (`generatorVersion: 'palette-generator-v1'`) and the format of the candidate bytes they hash (`candidateFormatVersion`: `'palette-typescript-v1'` for a `.ts` output, `'palette-json-v1'` for a `.json` output or a printed candidate). `candidateSha256` and every other receipt field keep their meaning, values, and order, so existing readers keep working.
+[feat] `astryx theme palette generate` receipts now name the generator implementation (`generatorVersion: 'palette-generator-v1'`) and the format of the candidate bytes they hash (`candidateFormatVersion`: `'palette-typescript-v1'` for a `.ts` output, `'palette-json-v1'` for a `.json` output or a printed candidate). `candidateSha256` and every other receipt field keep their meaning, values, and order, so existing readers keep working. (#7678)
@rubyycheung
diff --git a/.changeset/search-family-member-names.md b/.changeset/search-family-member-names.md
index 1803da8e5d..f5dac20e83 100644
--- a/.changeset/search-family-member-names.md
+++ b/.changeset/search-family-member-names.md
@@ -2,6 +2,6 @@
'@astryxdesign/cli': patch
---
-[fix] `astryx search` finds a family member by its name spelled out, as its own description spells it ("vertical stack" is VStack), and lists a member named by its head word after single letters (VStack, HStack) for that word ("stack").
+[fix] `astryx search` finds a family member by its name spelled out, as its own description spells it ("vertical stack" is VStack), and lists a member named by its head word after single letters (VStack, HStack) for that word ("stack"). (#7927)
@josephfarina
diff --git a/.changeset/search-family-word-members.md b/.changeset/search-family-word-members.md
index 79048add2d..5b5416b188 100644
--- a/.changeset/search-family-word-members.md
+++ b/.changeset/search-family-word-members.md
@@ -2,6 +2,6 @@
'@astryxdesign/cli': patch
---
-[fix] `astryx search` lists the first three members a family's doc names for a query that is the family's name ("table" lists three Table parts after Table; "chat" lists Chat parts though no Chat component exists), for Core and integration families alike.
+[fix] `astryx search` lists the first three members a family's doc names for a query that is the family's name ("table" lists three Table parts after Table; "chat" lists Chat parts though no Chat component exists), for Core and integration families alike. (#7955)
@josephfarina
diff --git a/.changeset/search-tie-order.md b/.changeset/search-tie-order.md
index 6c3c8f5d61..129c03ed79 100644
--- a/.changeset/search-tie-order.md
+++ b/.changeset/search-tie-order.md
@@ -2,6 +2,6 @@
'@astryxdesign/cli': patch
---
-[fix] `astryx search` orders results the matcher scored the same by fit instead of by name: below the first result, a part of it leads (BadgeCountBadges after Badge), then the result matching the query's rarer words. Scores and the first result are unchanged.
+[fix] `astryx search` orders results the matcher scored the same by fit instead of by name: below the first result, a part of it leads (BadgeCountBadges after Badge), then the result matching the query's rarer words. Scores and the first result are unchanged. (#7959)
@josephfarina
diff --git a/.changeset/stone-reviewed-palette.md b/.changeset/stone-reviewed-palette.md
index 4f4be1514f..218caba0f9 100644
--- a/.changeset/stone-reviewed-palette.md
+++ b/.changeset/stone-reviewed-palette.md
@@ -3,6 +3,6 @@
'@astryxdesign/cli': patch
---
-[feat] Replace Stone's internal shared-ramp mapping with reviewed light and dark ramps while preserving the public numbered palette lookups and `hue`/`chroma` metadata. The light canvas moves from `#F3F3F5` to `#F0F0F7`, the dark popover from `#25252A` to `#302F36`, and Green, Yellow, Teal, and Cyan use re-seeded midtones (including Green `#667D65` to `#528B49`). Seven families' light stop-90 surfaces, syntax colors, and input status rims shift; the mapped success and warning rims use `#609757` and `#A08C36`, and syntax attribute uses `#736419`, keeping the required contrast floors. Existing apps can keep the former appearance by extending `stoneTheme` and overriding the affected color, syntax, shadow, and component tokens with their previous values. The CLI template ships the same reproducible request, receipt, and runtime-sized references.
+[feat] Replace Stone's internal shared-ramp mapping with reviewed light and dark ramps while preserving the public numbered palette lookups and `hue`/`chroma` metadata. The light canvas moves from `#F3F3F5` to `#F0F0F7`, the dark popover from `#25252A` to `#302F36`, and Green, Yellow, Teal, and Cyan use re-seeded midtones (including Green `#667D65` to `#528B49`). Seven families' light stop-90 surfaces, syntax colors, and input status rims shift; the mapped success and warning rims use `#609757` and `#A08C36`, and syntax attribute uses `#736419`, keeping the required contrast floors. Existing apps can keep the former appearance by extending `stoneTheme` and overriding the affected color, syntax, shadow, and component tokens with their previous values. The CLI template ships the same reproducible request, receipt, and runtime-sized references. (#7669)
@rubyycheung
diff --git a/.changeset/submenu-thumbnail-chatlist-busy-announces-once.md b/.changeset/submenu-thumbnail-chatlist-busy-announces-once.md
index 80cdffa988..e6fe5d11da 100644
--- a/.changeset/submenu-thumbnail-chatlist-busy-announces-once.md
+++ b/.changeset/submenu-thumbnail-chatlist-busy-announces-once.md
@@ -2,6 +2,6 @@
'@astryxdesign/core': patch
---
-[fix] `DropdownMenuSubMenu` (with `hasSpinner`), an uploading `Thumbnail`, and `ChatMessageList` while it loads older messages announce their busy start ("Loading") once, politely, through the shared announcement channel. The Spinner each one shows is hidden from assistive technology (`spec:AST-086` FR4, FR6, FR8). Before, that Spinner mounted as its own `role="status"` region already named "Loading", which screen readers often skip; in `ChatMessageList` it was also a second live role inside the log. Tests that found these Spinners with `getByRole('status', {name: 'Loading'})` should query the Spinner element or the owner's busy state instead.
+[fix] `DropdownMenuSubMenu` (with `hasSpinner`), an uploading `Thumbnail`, and `ChatMessageList` while it loads older messages announce their busy start ("Loading") once, politely, through the shared announcement channel. The Spinner each one shows is hidden from assistive technology (`spec:AST-086` FR4, FR6, FR8). Before, that Spinner mounted as its own `role="status"` region already named "Loading", which screen readers often skip; in `ChatMessageList` it was also a second live role inside the log. Tests that found these Spinners with `getByRole('status', {name: 'Loading'})` should query the Spinner element or the owner's busy state instead. (#7950)
@cixzhang
diff --git a/.changeset/trigger-menu-loading-announcement.md b/.changeset/trigger-menu-loading-announcement.md
index 2a9eab0e48..1af45e4ef1 100644
--- a/.changeset/trigger-menu-loading-announcement.md
+++ b/.changeset/trigger-menu-loading-announcement.md
@@ -2,7 +2,7 @@
'@astryxdesign/core': patch
---
-[fix] ChatComposerInput: the trigger menu's loading row no longer mounts as a `role="status"` region already holding its text, which screen readers could skip. The loading text is announced once per pending search through the shared polite channel instead, and a search that returns its results before the loading row is painted, such as `createStaticSource` or a cached result, announces nothing; the visible row and its `loadingText` are unchanged.
+[fix] ChatComposerInput: the trigger menu's loading row no longer mounts as a `role="status"` region already holding its text, which screen readers could skip. The loading text is announced once per pending search through the shared polite channel instead, and a search that returns its results before the loading row is painted, such as `createStaticSource` or a cached result, announces nothing; the visible row and its `loadingText` are unchanged. (#7900)
Fixes #7859.
diff --git a/.changeset/typeahead-clears-reset-on-unmount.md b/.changeset/typeahead-clears-reset-on-unmount.md
index f88d06fb50..8ef0babbc9 100644
--- a/.changeset/typeahead-clears-reset-on-unmount.md
+++ b/.changeset/typeahead-clears-reset-on-unmount.md
@@ -2,5 +2,5 @@
'@astryxdesign/core': patch
---
-[fix] useTypeahead clears its pending buffer reset when its component unmounts or an `<Activity>` boundary hides it, so a menu, list or selector removed within 750 ms of a typed character leaves no timer running behind it, and a hidden one comes back with an empty buffer
+[fix] useTypeahead clears its pending buffer reset when its component unmounts or an `<Activity>` boundary hides it, so a menu, list or selector removed within 750 ms of a typed character leaves no timer running behind it, and a hidden one comes back with an empty buffer (#7938)
@vjeux
diff --git a/.changeset/typeahead-family-busy-announces-once.md b/.changeset/typeahead-family-busy-announces-once.md
index 05d2b53e6b..f70ee8bc21 100644
--- a/.changeset/typeahead-family-busy-announces-once.md
+++ b/.changeset/typeahead-family-busy-announces-once.md
@@ -2,6 +2,6 @@
'@astryxdesign/core': patch
---
-[fix] `ComplexSelector`, `Typeahead`, `Tokenizer` and a directly used `BaseTypeahead` announce their busy start ("Loading") once, politely, through the shared announcement channel, and the Spinner they show while busy or while a search is in flight is no longer a live region (`spec:AST-086` FR6, FR8): ComplexSelector's is hidden from assistive technology, and the search Spinner of Typeahead, Tokenizer and BaseTypeahead stays named as an image ("Loading") so the search's busy feedback keeps its name. Before, that Spinner mounted as its own `role="status"` region already named "Loading", which screen readers often skip, and it was a second owner beside the control's `aria-busy`. Inside an open modal dialog the announcement goes to a status region in the dialog. Tests that found the busy Spinner with `getByRole('status', {name: 'Loading'})` should check the control's `aria-busy`, or find the search Spinner with `getByRole('img', {name: 'Loading'})`.
+[fix] `ComplexSelector`, `Typeahead`, `Tokenizer` and a directly used `BaseTypeahead` announce their busy start ("Loading") once, politely, through the shared announcement channel, and the Spinner they show while busy or while a search is in flight is no longer a live region (`spec:AST-086` FR6, FR8): ComplexSelector's is hidden from assistive technology, and the search Spinner of Typeahead, Tokenizer and BaseTypeahead stays named as an image ("Loading") so the search's busy feedback keeps its name. Before, that Spinner mounted as its own `role="status"` region already named "Loading", which screen readers often skip, and it was a second owner beside the control's `aria-busy`. Inside an open modal dialog the announcement goes to a status region in the dialog. Tests that found the busy Spinner with `getByRole('status', {name: 'Loading'})` should check the control's `aria-busy`, or find the search Spinner with `getByRole('img', {name: 'Loading'})`. (#7930)
@cixzhang
diff --git a/.changeset/verify-built-before-deliver.md b/.changeset/verify-built-before-deliver.md
index fc77c81b36..64bab5e175 100644
--- a/.changeset/verify-built-before-deliver.md
+++ b/.changeset/verify-built-before-deliver.md
@@ -2,6 +2,6 @@
'@astryxdesign/cli': patch
---
-[feat] When the project's installed CLI (its own, or its workspace's) has `astryx doctor --built` (0.7.4 and later), the agent docs `astryx init` writes tell agents to run it before they deliver a build, and not to deliver a build that fails it. Before install, or on an older CLI, the line is left out; the next `init` or `upgrade --apply` adds it.
+[feat] When the project's installed CLI (its own, or its workspace's) has `astryx doctor --built` (0.7.4 and later), the agent docs `astryx init` writes tell agents to run it before they deliver a build, and not to deliver a build that fails it. Before install, or on an older CLI, the line is left out; the next `init` or `upgrade --apply` adds it. (#7944)
@josephfarina
diff --git a/.changeset/verify-npm8-scoped.md b/.changeset/verify-npm8-scoped.md
index 2ffe5452de..5573ee2849 100644
--- a/.changeset/verify-npm8-scoped.md
+++ b/.changeset/verify-npm8-scoped.md
@@ -2,6 +2,6 @@
'@astryxdesign/cli': patch
---
-[fix] `astryx integration verify` works on npm 8 for a scoped package: npm 8 names the tarball `@scope/name-1.0.0.tgz` in its pack output but writes `scope-name-1.0.0.tgz`, so verify reads the file npm wrote instead of failing to find it.
+[fix] `astryx integration verify` works on npm 8 for a scoped package: npm 8 names the tarball `@scope/name-1.0.0.tgz` in its pack output but writes `scope-name-1.0.0.tgz`, so verify reads the file npm wrote instead of failing to find it. (#7933)
@josephfarina
diff --git a/.changeset/y2k-reviewed-palette.md b/.changeset/y2k-reviewed-palette.md
index 6ecabbc057..d11aae1d3f 100644
--- a/.changeset/y2k-reviewed-palette.md
+++ b/.changeset/y2k-reviewed-palette.md
@@ -3,6 +3,6 @@
'@astryxdesign/cli': patch
---
-[feat] Keep Y2K's released `y2kPalettes` object byte-identical while moving the maintained Light/Dark theme to reviewed named palette stops. Periwinkle `#CCCFFA` and Neon Green `#C5E17A` remain exact; syntax becomes brighter, the dark code background moves from `#190F00` to `#0E0F1A`, and dark Gray background moves from `#EDE0D4` to `#DFE2F3`. The necessary dark input and unchecked-selection outline moves from the released `#3A3F5E` to Neutral Dark 45 `#636889`, raising contrast on the input surface from 1.71:1 to 3.23:1. Consumers that need the former appearance can extend `y2kTheme` and override the affected color, syntax, shadow, and component values with their previous values. The CLI template ships the same private palette request, receipt, and runtime-sized references.
+[feat] Keep Y2K's released `y2kPalettes` object byte-identical while moving the maintained Light/Dark theme to reviewed named palette stops. Periwinkle `#CCCFFA` and Neon Green `#C5E17A` remain exact; syntax becomes brighter, the dark code background moves from `#190F00` to `#0E0F1A`, and dark Gray background moves from `#EDE0D4` to `#DFE2F3`. The necessary dark input and unchecked-selection outline moves from the released `#3A3F5E` to Neutral Dark 45 `#636889`, raising contrast on the input surface from 1.71:1 to 3.23:1. Consumers that need the former appearance can extend `y2kTheme` and override the affected color, syntax, shadow, and component values with their previous values. The CLI template ships the same private palette request, receipt, and runtime-sized references. (#7675)
@rubyycheung