Skip to content

armgit / bento

Public Imported from GitHub
0

Bento, the office suite that fits in a file

Changelog: order 1.0.11 by what it means, and drop what never shipped

nyblnet17edcb506d25
diff --git a/CHANGELOG.md b/CHANGELOG.md
index 03bcded5..7c42b0f9 100644
--- a/CHANGELOG.md
+++ b/CHANGELOG.md
@@ -11,44 +11,7 @@ pre-1.0.
## [Unreleased]
-- **Fix: the toolbar buttons were in the wrong order until you switched
- language.** Comment and Export PDF sat in the wrong group and Save came after
- Help. Switching language happened to put them right, which made it look like
- switching language caused it — the first load was the wrong one.
-
-- **Hide the slide number or progress bar.** A new **Slideshow** section in the
- slide panel has toggles for both, plus the corner navigation arrows. They're
- deck-wide and travel in the file, so a deck you hand to someone else presents
- the way you designed it.
-
-- **Fix: presenting on a phone shows the deck, not a scrollable page.** Below
- about 435px wide, the presentation was quietly switching to a scrolling
- reading layout instead of a slideshow — so swipe navigation stopped working
- and hidden interactive slides became scrollable content.
-
-- **Fix: presenting was broken.** Slides showed at a fraction of the screen
- with speaker notes spilling underneath. A stray missing bracket in the
- stylesheet swallowed all of the presentation layout rules. Nothing was wrong
- with your decks — presenting is back to full screen.
-
-- **You can see what changed, on both sides of an update.** When an update is
- available the About dialog now lists the headlines from that release inline,
- instead of only a version number and a link off to GitHub — and because they
- travel in the signed manifest, they can't be tampered with. After the update
- lands and you reload, Bento says once which version you're now on, with a
- link to the full notes. It only says it if you actually upgraded: someone
- opening a deck you sent them never sees it.
-- **The editor fits on a phone.** The toolbar used to need about 680px of a
- 402px screen: it ran off the edge, took the Save button with it, and because
- nothing clipped it, swiping the toolbar dragged the whole canvas sideways.
- On a phone it now folds into two menus — + for inserting and ⋯ for
- everything occasional — leaving slides, insert, undo, format, save and more,
- at proper touch size. The side panels slide over the canvas instead of
- squeezing it, so the slide you're editing is no longer the smallest thing on
- screen. Nothing changes on a laptop.
-
- Known gap: the save-as menu (copy, new deck, template, password) doesn't fit
- on a phone yet and is unreachable there for now.
+## [1.0.11] — 2026-07-27
- **Maths, written the way you'd write it.** Type `$E=mc^2$` in a text box and
it renders as a formula — `$$…$$` for a display equation on its own line.
@@ -73,24 +36,17 @@ pre-1.0.
Tokyo opens in French chrome for a French reader, and the deck itself is
unchanged either way.
-- **Fix: saved files no longer grow by 100 KB on every save.** Each save wrote
- a fresh, uncompressed copy of the app's stylesheet into the file, which the
- next save then copied again — a deck saved ten times carried ten of them and
- had put on a megabyte for nothing. The stylesheet belongs in the compressed
- runtime payload, where it takes 27 KB and is written exactly once; a file
- that already accumulated copies drops all of them the next time you save it.
-
-- **Fix: a large chart legend no longer crowds the axis labels.** Charts that
- don't set their own margins now leave room for the legend at whatever size
- it's set to, instead of assuming the default one.
-
-- **Fix: readable axis numbers on the showcase deck's linked chart.** They were
- being drawn half-transparent against a dark panel.
+- **The editor fits on a phone.** The toolbar used to need about 680px of a
+ 402px screen: it ran off the edge, took the Save button with it, and because
+ nothing clipped it, swiping the toolbar dragged the whole canvas sideways.
+ On a phone it now folds into two menus — + for inserting and ⋯ for
+ everything occasional — leaving slides, insert, undo, format, save and more,
+ at proper touch size. The side panels slide over the canvas instead of
+ squeezing it, so the slide you're editing is no longer the smallest thing on
+ screen. Nothing changes on a laptop.
-- **Chart labels and legends now honor their visual options.** The lightweight
- chart renderer applies configured font sizes and weights to axis labels and
- legends, respects legend spacing and placement, and measures CJK legend text
- correctly so localized series names no longer overlap.
+ Known gap: the save-as menu (copy, new deck, template, password) doesn't fit
+ on a phone yet and is unreachable there for now.
- **Your decks look like themselves in Finder, Files and the Bento Tray app.**
Every Bento file used to thumbnail as the same dark box, because thumbnails
@@ -110,19 +66,19 @@ pre-1.0.
thumbnail — and a deck that had a preview loses it the moment you set a
password.
-- **Updating a file now suggests that file's own name.** When an update asks
- where to save, the dialog is pre-filled with the name of the deck you have
- open rather than one derived from its title — so a file called
- `Q3-board.bento.html` no longer offers to save itself as
- `Q3_Board_Review.bento.html`. The backup written alongside an in-place update
- follows the same name. Where the save dialog opens is set by the browser and
- can't be pointed at a folder by the page, but it now remembers the last place
- you saved, so the second update onwards starts in the right directory.
-- **The starter deck is called “Bento Slides Showcase” again.** The lowercase
- rebrand swept the deck's own title along with the app's, but a deck title is
- a document name — it shows in the window title and becomes the suggested
- filename — so it reads better in title case. The `bento/slides` wordmark is
- unchanged.
+- **Hide the slide number or progress bar.** A new **Slideshow** section in the
+ slide panel has toggles for both, plus the corner navigation arrows. They're
+ deck-wide and travel in the file, so a deck you hand to someone else presents
+ the way you designed it.
+
+- **You can see what changed, on both sides of an update.** When an update is
+ available the About dialog now lists the headlines from that release inline,
+ instead of only a version number and a link off to GitHub — and because they
+ travel in the signed manifest, they can't be tampered with. After the update
+ lands and you reload, Bento says once which version you're now on, with a
+ link to the full notes. It only says it if you actually upgraded: someone
+ opening a deck you sent them never sees it.
+
- **The screen stays awake while you present.** Phones and laptops used to dim
and lock partway through a talk if you left a slide up for a couple of
minutes. Bento now holds the screen on for the length of the show and lets go
@@ -142,9 +98,45 @@ pre-1.0.
backed up, while still showing the file itself as out of date, because it is.
(A password-protected deck is never snapshotted, so it stays quiet rather
than promise a safety net it doesn't have.)
-- **See what's new before you update.** When an update is available, the About
- dialog now offers a "What's new" link straight to that version's release
- notes.
+
+- **Updating a file now suggests that file's own name.** When an update asks
+ where to save, the dialog is pre-filled with the name of the deck you have
+ open rather than one derived from its title — so a file called
+ `Q3-board.bento.html` no longer offers to save itself as
+ `Q3_Board_Review.bento.html`. The backup written alongside an in-place update
+ follows the same name. Where the save dialog opens is set by the browser and
+ can't be pointed at a folder by the page, but it now remembers the last place
+ you saved, so the second update onwards starts in the right directory.
+
+- **The starter deck is called “Bento Slides Showcase” again.** The lowercase
+ rebrand swept the deck's own title along with the app's, but a deck title is
+ a document name — it shows in the window title and becomes the suggested
+ filename — so it reads better in title case. The `bento/slides` wordmark is
+ unchanged.
+
+- **Chart labels and legends now honor their visual options.** The lightweight
+ chart renderer applies configured font sizes and weights to axis labels and
+ legends, respects legend spacing and placement, and measures CJK legend text
+ correctly so localized series names no longer overlap.
+
+- **Fix: presenting on a phone shows the deck, not a scrollable page.** Below
+ about 435px wide, the presentation was quietly switching to a scrolling
+ reading layout instead of a slideshow — so swipe navigation stopped working
+ and hidden interactive slides became scrollable content.
+
+- **Fix: saved files no longer grow by 100 KB on every save.** Each save wrote
+ a fresh, uncompressed copy of the app's stylesheet into the file, which the
+ next save then copied again — a deck saved ten times carried ten of them and
+ had put on a megabyte for nothing. The stylesheet belongs in the compressed
+ runtime payload, where it takes 27 KB and is written exactly once; a file
+ that already accumulated copies drops all of them the next time you save it.
+
+- **Fix: a large chart legend no longer crowds the axis labels.** Charts that
+ don't set their own margins now leave room for the legend at whatever size
+ it's set to, instead of assuming the default one.
+
+- **Fix: readable axis numbers on the showcase deck's linked chart.** They were
+ being drawn half-transparent against a dark panel.
- **Fix: the About dialog's update section overlapped the controls beneath it.**
Once an update was found, the extra heading and buttons collapsed into a