Skip to content

Debloat any Android or Google TV over Wi-Fi and get an Apple TV-style home.

examples: Vidda C1 as a second unit of vidda-c1s-mt9669; the reference launcher takes the Home key

晓晓晓晓丶vv57f1af196de4
diff --git a/examples/vidda-c1s-mt9669/README.md b/examples/vidda-c1s-mt9669/README.md
new file mode 100644
index 000000000..3a83a7f15
--- /dev/null
+++ b/examples/vidda-c1s-mt9669/README.md
@@ -0,0 +1,55 @@
+# Vidda C1S and C1 (MT9669, Android 9, China JuUI)
+
+| File | What it is |
+|---|---|
+| `debloat.txt` | The list, tested on a C1S and on a C1 with the same build; its header has both units |
+| `config.json` | Inputs panel, app library, Home at power-on and hidden AOSP leftovers, for the C1 launcher setup below |
+
+## C1: the reference launcher as Home, with 聚好看 left enabled
+
+Measured on a Vidda C1 4K tri-colour laser projector on 2026-11-01, build `PPR2.180905.006.A1`
+(02.02.60.02), after the list in this folder. The C1S header says Home stayed with 聚好看 on that unit
+whatever `set-home-activity` reported; on this C1, with the same build, it did not.
+
+**Do not disable `com.jamdeo.tv.vod`.** Nothing below needs it off. On a Hisense Android 9 set with the
+same JuUI launcher, disabling it left boot hanging with no way back without root
+(`docs/devices/hisense-70v1f-s-nova72691-android9.md`).
+
+Install the launcher with the stock one left alone and the key helper on:
+
+```bash
+TV_HOST=<projector ip> STOCK_LAUNCHER=none HOME_KEY_SERVICE=1 launcher/build-and-install.sh
+```
+
+What happened:
+
+- `cmd package set-home-activity` printed `Success`, and `cmd package resolve-activity` for HOME then
+ answered `com.gathin.tvhome/.MainActivity`. The only HOME candidate before the install was
+ `com.jamdeo.tv.vod/com.ju.main.launcher.LauncherActivity`.
+- The physical Home key on the Bluetooth remote, pressed from inside another app, opened the launcher:
+ logcat shows `START u0 {act=android.intent.action.MAIN cat=[android.intent.category.HOME] ...
+ cmp=com.gathin.tvhome/.MainActivity} from uid 1000`. Injected `input keyevent HOME` was not used as proof.
+- Boot still lands on 聚好看: the firmware starts it by component name,
+ `START u0 {... cat=[android.intent.category.HOME] ... cmp=com.jamdeo.tv.vod/com.ju.main.launcher.LauncherActivity} from uid 0`,
+ whatever Home resolves to. With `power_on_home_always` and `HOME_KEY_SERVICE=1`, the helper sends Home
+ about a second later: after a reboot, logcat shows that second HOME start and `dumpsys activity`
+ has the launcher in front. A key pressed before that wins.
+- With the helper bound, holding volume up still ramps, and Home, Back and the Input key work on the real
+ remote (owner-checked).
+- `dumpsys tv_input` lists no inputs, so the Inputs pill uses the vendor panel (`source_panel_service`):
+ it opens 信号源 with HDMI 1/eARC, HDMI 2 and 投屏, and switches from there.
+- 聚好看's own 切换桌面 offers only its 标准, 少儿 and 长辈 desktops, not a third-party launcher.
+
+`config.json` holds the keys this unit used. They were built into
+`launcher/app/src/main/res/values/config.xml` on the C1; pushing the same file with
+`tools/theme.sh examples/vidda-c1s-mt9669` was not tried. Dock apps are left out: pick your own.
+
+To give Home back to 聚好看: hold OK on Settings in the launcher, then Launcher settings, then Choose
+default home. Switch the CleanYourTV accessibility service off in the TV's accessibility settings to stop
+the power-on redirect.
+
+## Closing ADB
+
+Check with `tools/adb-closed.py` after switching debugging off. On the C1, port 5555 was still open
+after the owner's pass through the menu (`settings get global adb_enabled` still answered 1).
+`settings put global adb_enabled 0` over ADB closed it, and it stayed closed after a reboot.
diff --git a/examples/vidda-c1s-mt9669/config.json b/examples/vidda-c1s-mt9669/config.json
new file mode 100644
index 000000000..fdb391e24
--- /dev/null
+++ b/examples/vidda-c1s-mt9669/config.json
@@ -0,0 +1,19 @@
+{
+ "live_tv_package": "",
+ "source_panel_service": "com.hisense.tv.inputs/com.hisense.tv.InputsUIService",
+ "source_panel_action": "com.hisense.tv.start_inputs",
+ "app_library": true,
+ "power_on_home_always": true,
+ "hidden_apps": [
+ "com.android.calendar",
+ "com.android.camera2",
+ "com.android.contacts",
+ "com.android.music",
+ "com.android.deskclock",
+ "com.android.settings",
+ "com.hisense.tv.catlog",
+ "com.hisense.systeminfo",
+ "com.hisense.hitv.hicloud.account",
+ "com.hispeech.ai.area"
+ ]
+}
diff --git a/examples/vidda-c1s-mt9669/debloat.txt b/examples/vidda-c1s-mt9669/debloat.txt
index 3a54da0c0..47e0aa1ec 100644
--- a/examples/vidda-c1s-mt9669/debloat.txt
+++ b/examples/vidda-c1s-mt9669/debloat.txt
@@ -3,7 +3,8 @@
# Same com.jamdeo.* / com.hisense.* namespace as examples/vidda-mt9653/, an older and
# stricter firmware: several of its locks are documented below.
# Stock launcher: com.jamdeo.tv.vod (聚好看 JuUI). It STAYS ENABLED on this list — see
-# the Home-key note; there is no launcher swap here, only the debloat.
+# the Home-key note. The C1S kept 聚好看 as Home; on the C1 unit (below) the reference
+# launcher took the Home key with 聚好看 still enabled, see README.md in this folder.
#
# Apply: TV_HOST=<projector ip> tools/disable.sh examples/vidda-c1s-mt9669/debloat.txt
# Undo: tools/restore.sh examples/vidda-c1s-mt9669/debloat.txt
@@ -50,6 +51,18 @@
# with a focus check between batches, then two cold reboots. Home, Wi-Fi, casting, IMEs,
# Bluetooth remote, voice, 聚好看 playback all checked the same day; not yet lived with
# for weeks.
+#
+# Second unit: Vidda C1 4K tri-colour laser projector (China), the same device MT9669, board
+# m7642 and build PPR2.180905.006.A1 (02.02.60.02), VIDAA 6.6, 3.6 GB, ro.adb.secure=1.
+# Nothing was disabled at the factory on this one. No Aerial: the active screensaver stayed
+# the desk clock, so com.jamdeo.screensaver is not the dream either; the screensaver timeout
+# was not waited out after disabling it. Two packages the C1S notes do not name were found
+# and disabled (cloudfalcon, fusion.android.tv.demo, marked C1 below); the owner's own picks
+# are the commented block at the end. Applied in six batches with a screenshot between them,
+# then reboot-checked twice on 2026-11-01: every entry stayed disabled; Wi-Fi, the source
+# panel and the Bluetooth remote kept working (casting was not tried), and free memory went
+# from about 1.87 GB to 2.38 GB. The 双11 skin and side banner on 聚好看's home
+# went with the ad services; its sponsored rows did not. Not yet lived with for days.
# Hisense telemetry, reporting and push
com.hisense.hitv.das
@@ -61,6 +74,7 @@ com.hisense.service.message # the vendor push channel
com.hisense.business.ad # ships Alibaba Baichuan + CIBN shopping SDKs; installed as a user app
com.hisense.service.ad # its WatchingAccessibilityService was registered in enabled_accessibility_services
com.hisense.tv.weather # weather card, a content feed
+com.hisense.cloudfalcon # C1: user app hosting com.hisense.service.ad's boot and network-change receivers
# Retail, hotel, factory and leftovers
com.hisense.demonstrate
@@ -68,7 +82,8 @@ com.hisense.hotelmenu
com.hisense.autotest
com.hisense.electronictutorial # e-manual
com.hisense.ar.baike
-com.jamdeo.tv.fte # first-run wizard, long done
+com.jamdeo.tv.fte # first-run wizard, long done; shares android.uid.system, Wi-Fi survived
+fusion.android.tv.demo # C1: RetailDisplay store demo in /system/product/priv-app
# com.hisense.usbupgrade # kept: the USB firmware upgrade and recovery path
# Duplicate / unused lifestyle apps (casting stacks deliberately kept)
@@ -82,6 +97,19 @@ com.jamdeo.screensaver
# AOSP leftovers on a TV
com.android.printspooler
+# The C1 owner has these off as well; they stay on for everyone else. Uncomment what you don't use.
+# com.keylab.speech.view.vidaa # voice UI; the remote's mic key stops working (the C1S owner keeps it)
+# com.android.wechathci # WeChat photo push: an always-on WebService process and WechatAD pages
+# com.audiocn.karaoke.micmanager # karaoke mic manager: boot, network, screen and USB receivers, a resident service
+# com.hisense.smartimages # HiSmartImage screen recognition: ScreenCapService, SIWindowMonitorService accessibility
+# com.hisense.familymessage # 家庭留言 family message board
+# com.vision.palette # AI 画板
+# com.speech.enchatroom # AI 英语聊天室, pushed as a user app in 2025
+# com.hisense.aiot # smart-home and IR appliance control
+# Streaming apps this set has off: com.hunantv.license (芒果TV), com.newtv.cboxtv (央视频TV),
+# com.ju.miguvideoTV.cmcc (咪咕视频), com.vcinema.client.tv (华数南瓜电影), com.tencent.start.tv
+# (腾讯START). JuUI tiles that deep-link into one of them stop opening.
+
# ---------------------------------------------------------------------------------------------
# Do NOT disable (checked on this device):
# com.jamdeo.tv.vod 聚好看, the stock launcher — see the Home-key note above
diff --git a/examples/vidda-c1s-mt9669/tv.json b/examples/vidda-c1s-mt9669/tv.json
index 82917303c..e90780348 100644
--- a/examples/vidda-c1s-mt9669/tv.json
+++ b/examples/vidda-c1s-mt9669/tv.json
@@ -1,6 +1,6 @@
{
- "tv": "Vidda C1S 4K laser projector (VIDAA_TV, device MT9669, board m7642), China JuUI",
+ "tv": "Vidda C1S and C1 4K laser projectors (VIDAA_TV, device MT9669, board m7642), China JuUI",
"os": "Android 9",
"brand": "Vidda",
- "notes": "Telemetry, push channel/poller, ad sidecars (聚好看 itself keeps rendering), operator weather card, retail/hotel/factory leftovers, food/calendar apps, the 拍信 ad screensaver, print spooler; stock launcher 聚好看 stays enabled — the firmware pins HOME to it and shields it from accessibility events, so the launcher is aerial with the one-line usage-stats patch (pengchujin/aerial-tv#545); voice, casting, NAS, OTA, IMEs, HDMI (tiletransition), laser engine kept; ADB needs on-screen authorization (ro.adb.secure=1); reboot-checked"
+ "notes": "Telemetry, push channel/poller, ad sidecars (聚好看 itself keeps rendering), operator weather card, retail/hotel/factory leftovers, food/calendar apps, the 拍信 ad screensaver, print spooler; stock launcher 聚好看 stays enabled. C1S: HOME stayed pinned to 聚好看 and shielded from accessibility events, so its launcher is aerial with the one-line usage-stats patch (pengchujin/aerial-tv#545). C1 on the same build: the reference launcher took the Home key with `set-home-activity`, and `power_on_home_always` brings it up after the hard-coded 聚好看 boot ([notes](vidda-c1s-mt9669/README.md)); voice, casting, NAS, OTA, IMEs, HDMI (tiletransition), laser engine kept; ADB needs on-screen authorization (ro.adb.secure=1); reboot-checked"
}