Skip to content

Debloat any Android or Google TV over Wi-Fi and get an Apple TV-style home.

examples: add Tuvio TD50UFBCV5 (Changhong AI PONT, DVB96, MediaTek), Google TV 14

Konstantin Bulanove4715f2ad522
diff --git a/examples/tuvio-td50ufbcv5/README.md b/examples/tuvio-td50ufbcv5/README.md
new file mode 100644
index 000000000..6c2119e10
--- /dev/null
+++ b/examples/tuvio-td50ufbcv5/README.md
@@ -0,0 +1,88 @@
+# Tuvio TD50UFBCV5 (Google TV 14, AI PONT)
+
+Tuvio's 50" Google TV model, built by Changhong (`ro.product.model` "AI PONT", product `DVB96`,
+device/board `central`, MediaTek `m7632`, armv7l), firmware `UKNV.260506.001`, UI at 1920x1080
+(320 dpi), 1.8 GB of RAM. No Yandex apps are preinstalled. Same board and firmware as the
+[`tuvio-td43ufbcv5`](../tuvio-td43ufbcv5/) (43") and the BenQ E55-735.
+
+Tested on 1 November 2026 with the list below, the launcher as Home and the real remote: same-day
+test, not a multi-day soak.
+
+| File | What it is |
+|---|---|
+| `debloat.txt` | The packages that were disabled, grouped and commented |
+| `config.json` | The launcher's dock and layout for this set; push it with `tools/theme.sh` |
+
+![The Clean Your TV launcher on the Tuvio TD50UFBCV5: greeting and clock top left, Inputs, Wi-Fi, the app library and Settings top right, the four-app dock in its band](home.png)
+
+All commands run from the repo root, with the TV's address in `TV_HOST`. They need network ADB on
+the TV while they run, and it should be off again afterwards. Port 5555 answered straight away on
+this set and survived reboots.
+
+## The Wi-Fi network comes first
+
+The saved Wi-Fi network belongs to the Google TV setup wizard,
+`com.google.android.tungsten.setupwraith` (`dumpsys wifi | grep -o 'cname=[^ ]*'`). Disabling it
+takes the network with it, and the TV drops off Wi-Fi and off ADB. Before the last batch:
+
+1. Settings → Network & Internet → the saved network → Forget.
+2. Join it again. It then belongs to `android.uid.system:1000`.
+3. Only then run the list. `tools/disable.sh` refuses a list with setupwraith in it while the
+ network still belongs to it.
+
+## Install, from scratch or again
+
+The order matters: the Wi-Fi note first, then the list while Google TV's home still owns Home
+(setupwraith goes with it), then the launcher.
+
+```bash
+TV_HOST=<tv-ip> tools/disable.sh examples/tuvio-td50ufbcv5/debloat.txt
+TV_HOST=<tv-ip> launcher/build-and-install.sh
+TV_HOST=<tv-ip> tools/theme.sh examples/tuvio-td50ufbcv5
+```
+
+`launcher/build-and-install.sh` builds from source, checks the SDK level against the launcher's
+`minSdk`, installs the APK, makes it Home and applies the repository's Home guard: the stock
+launcher is only disabled once the new one answers Home. On this firmware `set-home-activity`
+prints "Success" while `launcherx` is still enabled, so Home has to be set once more after the
+last batch.
+
+The screensaver is the launcher's own clock:
+
+```bash
+TV_HOST=<tv-ip> tools/tv.py 'settings put secure screensaver_components com.gathin.tvhome/.ClockDream; settings put secure screensaver_default_component com.gathin.tvhome/.ClockDream'
+```
+
+`config.json` is the launcher's layout for this set, as it was on the tested TV: the dock
+(YouTube, NUM, OTT Navigator, AniLabX), the Live TV app hidden from the grid but offered in the
+Inputs menu, four columns and the app library as a round button in the top bar. `tools/theme.sh`
+pushes it to the launcher's own config file; the dock order can be changed there, or in the
+launcher's own Settings.
+
+## Undo everything
+
+```bash
+TV_HOST=<tv-ip> tools/restore.sh examples/tuvio-td50ufbcv5/debloat.txt com.google.android.apps.tv.launcherx
+```
+
+That enables every package the list disabled, using the recovery record `tools/disable.sh` wrote.
+Nothing is uninstalled. It does not put the screensaver back: the stock value is
+`com.google.android.apps.tv.dreamx/.service.Backdrop` (`screensaver_components` and
+`screensaver_default_component`).
+
+## Known behaviour on this set
+
+* The remote's Settings (gear) button does nothing with the stock launcher gone: it arrives as
+ scancode 498 (`KEY_BRL_DOT2`). `settings_key_scancodes 498` with `HOME_KEY_SERVICE=1` brings it
+ back, but any key-filtering accessibility helper bound on this firmware makes a held volume
+ button step once or twice instead of ramping. It is left off; Settings opens from the launcher's
+ own Settings pill.
+* The Netflix button does nothing while Netflix is disabled (`app_keys` in `config.json` can map
+ it to another app).
+* The launcher's network pill says "Wi-Fi" and not the network name: Android 14 redacts the SSID
+ from an app that has no location permission, and this firmware's privacy service puts the
+ location master switch back off by itself.
+* Standby is MediaTek suspend: from deep standby the Bluetooth remote cannot wake the TV, the IR
+ remote and the power button can. That is not damage.
+* The Live TV app (`com.mediatek.wwtv.tvcenter`) is in the app library and at the end of the
+ Inputs menu.
diff --git a/examples/tuvio-td50ufbcv5/config.json b/examples/tuvio-td50ufbcv5/config.json
new file mode 100644
index 000000000..01c64466d
--- /dev/null
+++ b/examples/tuvio-td50ufbcv5/config.json
@@ -0,0 +1,19 @@
+{
+ "dock_apps": [
+ "com.google.android.youtube.tv",
+ "ru.yourok.num",
+ "studio.scillarium.ottnavigator",
+ "xyz.anilabx.app"
+ ],
+ "hidden_apps": [
+ "com.mediatek.wwtv.tvcenter"
+ ],
+ "live_tv_package": "com.mediatek.wwtv.tvcenter",
+ "columns": 4,
+ "rows_below_dock": 0,
+ "library_button": true,
+ "show_library_pill": false,
+ "app_library": true,
+ "background_color": "#000000",
+ "wallpaper": false
+}
diff --git a/examples/tuvio-td50ufbcv5/debloat.txt b/examples/tuvio-td50ufbcv5/debloat.txt
new file mode 100644
index 000000000..066c2f522
--- /dev/null
+++ b/examples/tuvio-td50ufbcv5/debloat.txt
@@ -0,0 +1,97 @@
+# Tuvio TD50UFBCV5 (50", 4K, Yandex Market brand), built by Changhong:
+# ro.product.model "AI PONT", product DVB96, device/board central, MediaTek m7632, armv7l,
+# Google TV 14 (API 34), firmware UKNV.260506.001, about 1.8 GB RAM, UI 1920x1080 at 320 dpi.
+# Same board and firmware as examples/tuvio-td43ufbcv5/ (43") and examples/benq-e55-735 (DVB96BQ).
+# No Yandex apps preinstalled.
+#
+# Tested on the TV on 1 November 2026, batch by batch, with two reboots: one in the middle (it ends
+# the ADB session, which has to be authorised again) and one after the Home handover, as the last
+# step. Home, the Inputs menu (TV_INPUT), switching to HDMI, YouTube playback and the real remote
+# checked after each; no FATAL or ANR in logcat, no crash buffer entries. Same-day test, not a
+# multi-day soak.
+#
+# Apply: TV_HOST=<tv ip> tools/disable.sh examples/tuvio-td50ufbcv5/debloat.txt
+# Undo: TV_HOST=<tv ip> tools/restore.sh examples/tuvio-td50ufbcv5/debloat.txt com.google.android.apps.tv.launcherx
+# Everything is DISABLED, not uninstalled. Comment out any line you want to keep.
+# restore.sh does not put the screensaver back: the stock value is
+# com.google.android.apps.tv.dreamx/.service.Backdrop (screensaver_components and _default_component).
+#
+# HOME candidates: launcherx (priority 2), setupwraith/.RecoveryActivity (priority 1), tv.settings/.FallbackHome.
+# Not installed on this set: com.google.android.videos (the Google TV app, the source of the home
+# screen's recommendations).
+#
+# Quirks on this firmware, all checked on the TV:
+# - Port 5555 answered after the reboot that follows turning on USB + Wireless debugging.
+# - `cmd package set-home-activity com.gathin.tvhome/.MainActivity` prints Success but Home stays on
+# launcherx while it is enabled (priority 2). Home moves only once launcherx is disabled; set it
+# again after that and confirm with `dumpsys activity activities | grep mFocusedApp`.
+# - The Wi-Fi network saved in the first-run wizard belonged to setupwraith (cname=...setupwraith).
+# Forget and re-join it in Settings first; it then belongs to android.uid.system:1000 and setupwraith
+# can go. With setupwraith disabled, RecoveryActivity never started (logcat) and Home has no delay.
+# Without that, the TV drops off Wi-Fi and off ADB together with the network.
+# - The IR remote ("MStar Smart TV IR Receiver", vendor 3697 product 0001):
+# Input sends KEYCODE_TV_INPUT, routed by com.mediatek.tv.service to the system Inputs menu: works
+# without any helper. KEYCODE_TV opens the Live TV app. YouTube works with the stock launcher gone.
+# The Settings (gear) button arrives as scancode 498 (KEY_BRL_DOT2) and does nothing once launcherx
+# is disabled. settings_key_scancodes 498 with HOME_KEY_SERVICE=1 brings it back, BUT with any
+# key-filtering accessibility helper bound, a held volume button steps only once or twice instead of
+# ramping (volume repeat is back as soon as the helper is off). Kept off here; Settings stays
+# reachable from the launcher's Settings pill.
+# The Netflix button is KEYCODE_STEM_1 -> com.mediatek.tv.service NetflixKeyReceiver; with Netflix
+# disabled it does nothing (app_keys could map it to another app).
+# - com.mediatek.androidbox (WFDSinkTest_CH) has a MiracastService and uses com.mediatek.wfdsink: on
+# this set it is the Miracast receiver, not just a test app.
+# - Standby is MediaTek suspend: from deep standby the Bluetooth remote cannot wake the TV, the IR
+# remote and the power button can. That is not damage.
+# - Android 14 hides the Wi-Fi name from the launcher on this firmware: its privacy service puts the
+# location master switch back off by itself, so the launcher's network pill says "Wi-Fi".
+#
+# KEEP, do not disable:
+# - com.mediatek.tv.service, com.mediatek.tvinput, com.mediatek.wwtv.tvcenter, com.mediatek.wwtv.setupwizard,
+# com.google.android.tv.inputplayer, com.mediatek.android.tv.globalkeyoverlay: Live TV, HDMI, Inputs key.
+# - com.mediatek.autopair (remote pairing), com.homwee.synckey (remote keys),
+# com.google.android.tv.remote.service (phone remote).
+# - com.homwee.factory, com.mediatek.tv.factorykey: also handle key broadcasts. Never LAUNCH them.
+# - com.homwee.dynamicbacklight, com.homwee.lightsensorservice: picture and auto brightness.
+# - com.homwee.upgrade, com.homwee.dmt.upgrade: firmware updates.
+# - com.dolby.android.audio.service, Play Store / Services / GSF, Gboard, WebView.
+# - com.google.android.katniss (voice search), com.mediatek.android.leanbacklauncher.partnercustomizer
+# (MediaTek launcher customization, lives in /vendor/odm): both left alone.
+
+# Batch 1: telemetry and ad services
+tv.anoki.acr.anokiacroptin # automatic content recognition (reports what is on screen)
+com.android.adservices.api # Privacy Sandbox ads
+com.android.ondevicepersonalization.services
+com.android.federatedcompute.services
+com.google.android.feedback
+com.android.tv.feedbackconsent
+com.google.android.partnersetup # partner setup: Phenotype flags, RLZ pings, partner app auto-installs
+
+# Batch 2: vendor and Google extras
+com.homwee.store # Changhong app store
+com.homwee.help # e-manual
+com.google.android.play.games
+com.google.android.syncadapters.calendar
+
+# Batch 3: the owner's own apps, and the casting and mirroring apps: this set has them off, they are
+# commented out here so a set whose owner uses them keeps them.
+# com.netflix.ninja # Netflix
+# com.amazon.amazonvideo.livingroom # Prime Video
+# com.google.android.youtube.tvmusic # YouTube Music
+# com.google.android.apps.mediashell # Chromecast
+# com.homwee.mmp.screenshare # AirPlay receiver (iPhone casting)
+# com.homwee.multiscreenshare # screen sharing
+# com.mediatek.androidbox # WFDSinkTest_CH: the Miracast receiver on this set
+# com.homwee.mmp.fileexplorer # USB file browser ("Media Player")
+# com.homwee.mmp.imageplayer # USB photo viewer
+
+# Batch 4: screensaver. First set the launcher's clock as screensaver:
+# settings put secure screensaver_components com.gathin.tvhome/.ClockDream
+# settings put secure screensaver_default_component com.gathin.tvhome/.ClockDream
+com.google.android.apps.tv.dreamx # ambient mode, mixes recommendations into the screensaver
+
+# Batch 5: stock home, LAST, only after launcher/ is installed and confirmed as Home.
+# Before setupwraith: `dumpsys wifi | grep -o 'cname=[^ ]*'`; if the Wi-Fi network belongs to it,
+# forget and re-join the network in Settings first, or the TV drops off Wi-Fi.
+com.google.android.tungsten.setupwraith # disable before launcherx; costs phone casting after a reboot (the Cast receiver reads its credentials from setupwraith)
+com.google.android.apps.tv.launcherx # then: cmd package set-home-activity --user 0 com.gathin.tvhome/.MainActivity
diff --git a/examples/tuvio-td50ufbcv5/home.png b/examples/tuvio-td50ufbcv5/home.png
new file mode 100644
index 000000000..50472ba4a
Binary files /dev/null and b/examples/tuvio-td50ufbcv5/home.png differ
diff --git a/examples/tuvio-td50ufbcv5/tv.json b/examples/tuvio-td50ufbcv5/tv.json
new file mode 100644
index 000000000..978787741
--- /dev/null
+++ b/examples/tuvio-td50ufbcv5/tv.json
@@ -0,0 +1,6 @@
+{
+ "tv": "Tuvio TD50UFBCV5 (Changhong AI PONT, DVB96, MediaTek m7632), Russia",
+ "os": "Google TV 14",
+ "brand": "Tuvio",
+ "notes": "Same board and firmware as the Tuvio TD43UFBCV5: Anoki ACR, adservices/federated compute, Google feedback, partnersetup (Phenotype, partner auto-installs), Homwee store/help, Play Games and dreamx off; Netflix, Prime Video, YouTube Music, Chromecast, AirPlay, Miracast (`com.mediatek.androidbox` is the receiver here) and the USB media apps off by the owner's choice, so they are commented out; voice assistant, Play Store, Live TV, HDMI and remote pairing kept; setupwraith owned the saved Wi-Fi (forget and re-join it first); Home moves only once launcherx is disabled; IR remote Settings key is scancode 498 but any key helper kills volume repeat, so it is left off; 1.8 GB; reboot-checked"
+}