Skip to content

DeepSeek Harness Tauri 桌面版 | Only 8mb installer, zero environment setup, preset plugins, Windows / macOS / Linux.

4.3 KB
Raw Blame
/** DSH 发行版 GitHub Release 下载 URL 前缀:日志展示时剥离,避免整段长 URL 占满一行 */
const DSH_RELEASE_URL_PREFIX = 'https://github.com/dsh-tauri-desk/deepseek-harness-pkg/releases/download/'
/** GitHub 代理镜像的透传包装前缀(与官方 URL 拼接),同样剥离 */
const DSH_MIRROR_URL_PREFIXES = [
  'https://gh-proxy.com/',
  'https://gh.llkk.cc/',
  'https://ghfast.top/',
  'https://ghproxy.net/',
]

/** 日志中认定为「错误行」的标记(大小写不敏感) */
const ERROR_LINE_MARKERS = /error|duplicate|fatal|panic|throw|✖|exception|failed/i

/**
 * 精简下载日志行:把 GitHub Release 下载 URL 缩短为「版本 tag / 文件名」,
 * 让日志里"正在下载的是什么"一目了然(如 `Download dsh-0.1.1-rc.1-32457794457/...zip`)。
 * 用 split/join 代替 replaceAll 以保证各构建目标下行为一致。
 */
export function formatLogLine(line: string): string {
  let formatted = line.split(DSH_RELEASE_URL_PREFIX).join('')
  for (const prefix of DSH_MIRROR_URL_PREFIXES) formatted = formatted.split(prefix).join('')
  return formatted
}

/**
 * 从日志行中挑出真正的错误行(命中错误标记,最多 8 行);没有命中则退回最后 8 行。
 * 纯函数:仅依赖字符串输入,便于单元测试。
 */
export function pickErrorLines(lines: readonly string[]): string[] {
  const reports = lines.filter(line => line.startsWith('ERROR HARNESS_FATAL_REPORT: ')).slice(-8)
  const errored = [...lines.filter(line => ERROR_LINE_MARKERS.test(line) && !line.startsWith('ERROR HARNESS_FATAL_REPORT: ')).slice(0, 8 - reports.length), ...reports]
  return errored.length > 0 ? errored : lines.slice(-8)
}

/**
 * 判断日志是否命中 Linux 的 inotify 文件监视上限(ENOSPC)错误。
 *
 * harness 服务(dsh web)会用 chokidar 递归监视 `$DSH_HOME/profiles/*`,
 * 当系统 `fs.inotify.max_user_watches` 上限过低(常见于 Docker/容器或新装 Ubuntu
 * 默认值偏小)时,node 会抛 `ENOSPC: System limit for number of file watchers
 * reached` 并直接退出,表现为「服务启动即崩溃」。这类错误对用户无解,必须提示
 * 调高系统参数(见 errors.inotify_limit 文案)。纯函数,便于单元测试。
 */
export function containsInotifyLimitError(lines: readonly string[]): boolean {
  return lines.some(line => /ENOSPC/i.test(line) && /file watchers/i.test(line))
}

export function containsHeapOomError(lines: readonly string[]): boolean {
  return lines.some(line => /JavaScript heap out of memory|Ineffective mark-compacts near heap limit/i.test(line))
}

/**
 * 端口被占用导致的启动失败(`listen EADDRINUSE: address already in use`)。
 *
 * dsh 在启动早期派生迁移/恢复用的 CLI 子进程,那个子进程继承同一个
 * `--port` 并去 bind 已被父进程占住的端口,于是 webserver(required)判定失败、
 * 整个 dsh 以 code 1 退出。配置端口在启动前必然空闲,因此这个命中意味着端口在
 * 本次启动过程中被别的进程占了——重启换一个端口即可能成功,无需用户介入。
 * 纯函数,便于单元测试。
 */
export function containsPortInUseError(lines: readonly string[]): boolean {
  return lines.some(line => /EADDRINUSE/i.test(line) && /address already in use/i.test(line))
}

/** V8 GC 追踪行:`Mark-Compact 8058.3 (8224.0) -> 8051.0 (8234.2) MB`,最后一个括号里是提交的堆总量 */
const HEAP_COMMITTED_MB = /\(\d+(?:\.\d+)?\)\s*->[^(]*\((\d+(?:\.\d+)?)\)\s*MB/

/**
 * 从日志尾部取崩溃瞬间实际提交到的堆上限(MB,取整)。
 *
 * V8 堆耗尽时会把 GC 追踪行写进日志,括号里的第二个数就是当时的堆总量;
 * 它通常略高于配置上限(V8 会略微超发),因此比"设置页里现在填了什么"
 * 更能说明崩溃现场的真实上限。没有 GC 追踪行时返回 undefined。
 */
export function heapPeakFromLogs(lines: readonly string[]): number | undefined {
  let peak: number | undefined
  for (const line of lines) {
    const matched = HEAP_COMMITTED_MB.exec(line)
    if (!matched) {
      continue
    }
    const committed = Number(matched[1])
    if (!Number.isFinite(committed)) {
      continue
    }
    const mb = Math.floor(committed)
    peak = peak === undefined ? mb : Math.max(peak, mb)
  }
  return peak
}