DesignCraft: An open-source page and layout design editor written by scratch in pure Rust
Merge PR #1554: Preferences: Units & Increments with no document open set the units of new documents, as in InDesign
aiongg2f8c43a079de
diff --cc crates/ui-egui/src/dialogs.rsindex 42b11bf1d,858f08a22..7dbf6c26d--- a/crates/ui-egui/src/dialogs.rs+++ b/crates/ui-egui/src/dialogs.rs@@@ -1749,9 -1749,9 +1750,10 @@@ fn preferences(app: &crate::DesignApp,&[("general", "General"),("interface", "Interface"),+ ("uiScaling", "UI Scaling"),("type", "Type"),("composition", "Composition"),+ ("units", "Units & Increments"),("spelling", "Spelling"),("autocorrect", "Autocorrect"),("notes", "Notes"),diff --cc crates/ui-egui/src/dialogs/tests.rsindex 6978890b5,7b0c8b5ba..7d1ceaa7f--- a/crates/ui-egui/src/dialogs/tests.rs+++ b/crates/ui-egui/src/dialogs/tests.rs@@@ -3525,444 -3522,56 +3525,498 @@@ fn character_style_options_set_the_digiassert_eq!(char_style(&app, "Emphasis").unwrap().chars.digits, Some(designcraft_doc::Digits::Farsi));}+/// Replace the text of the field beside the `nth` label `label` (on its row, to its right) with+/// `new`, and leave the field.+fn retype_beside(h: &mut egui_kittest::Harness<'static, crate::test_window::Window>, label: &str, nth: usize, new: &str) {+ use egui_kittest::kittest::Queryable;+ let l = h.get_all_by_label(label).nth(nth).unwrap_or_else(|| panic!("no label {label} #{nth}")).rect();+ let field = h+ .get_all_by(|n| n.role() == egui::accesskit::Role::TextInput)+ .map(|n| n.rect())+ .filter(|r| r.center().x > l.max.x && (r.center().y - l.center().y).abs() < l.height().max(8.0))+ .min_by(|a, b| a.min.x.total_cmp(&b.min.x))+ .unwrap_or_else(|| panic!("no field beside {label} #{nth}"))+ .center();+ crate::test_window::click_at(h, field);+ h.key_press_modifiers(egui::Modifiers::COMMAND, egui::Key::A);+ h.event(egui::Event::Text(new.into()));+ h.run_steps(1);+ // Tab leaves the field (Enter would be the dialog's OK).+ h.key_press(egui::Key::Tab);+ h.run_steps(3);+}++/// The course's chapter 40: Paragraph Border's four weights are linked as InDesign's, so a+/// side typed in sets all four; with the link off ("Make all settings the same") a side is set+/// alone, as the lesson gives the border only a thick left side. The corners link the same way.+#[test]+fn paragraph_border_sides_and_corners_link_as_indesigns() {+ use egui_kittest::kittest::Queryable;+ let (app, _) = ruled_paragraph();+ let mut h = crate::test_window::open(app, egui::vec2(1400.0, 900.0));+ h.state_mut().app.ui.dialog = Some(Dialog::new("paragraphStyleOptions", json!({"name": "Ruled Child", "section": "border", "p.borderOn": true})));+ h.run_steps(4);+ let field = |h: &egui_kittest::Harness<'static, crate::test_window::Window>, key: &str| {+ h.state().app.ui.dialog.as_ref().and_then(|d| d.fields.get(&format!("p.{key}")).cloned()).unwrap_or_default()+ };+ // The four weights start the same, so linked: Top sets them all.+ retype_beside(&mut h, "Top:", 0, "3");+ assert_eq!(field(&h, "borderWeights"), json!([3.0, 3.0, 3.0, 3.0]));+ // Unlinked, Left alone takes 10 pt.+ // The link of the weights (0), corners (1) or offsets (2), where it is now: the dialog+ // scrolls as fields take focus.+ let link = |h: &egui_kittest::Harness<'static, crate::test_window::Window>, n: usize| {+ let links: Vec<egui::Rect> = h.get_all_by_label("Make all settings the same").map(|n| n.rect()).collect();+ assert_eq!(links.len(), 3, "weights, corners and offsets each have a link");+ links[n].center()+ };+ let at = link(&h, 0);+ crate::test_window::click_at(&mut h, at);+ retype_beside(&mut h, "Left:", 0, "10");+ assert_eq!(field(&h, "borderWeights"), json!([3.0, 10.0, 3.0, 3.0]));+ // Linked again, the four take Top's weight; unlinked once more for the thick left side.+ let at = link(&h, 0);+ crate::test_window::click_at(&mut h, at);+ assert_eq!(field(&h, "borderWeights"), json!([3.0, 3.0, 3.0, 3.0]));+ let at = link(&h, 0);+ crate::test_window::click_at(&mut h, at);+ retype_beside(&mut h, "Left:", 0, "10");+ assert_eq!(field(&h, "borderWeights"), json!([3.0, 10.0, 3.0, 3.0]));+ // The corners start the same too: Top Left's size goes to all four.+ retype_beside(&mut h, "Top Left:", 0, "0p4");+ let corners = field(&h, "borderCorners");+ assert!((0..4).all(|i| corners[i]["size"] == json!(4.0)), "{corners}");+ // Unlinked, Top Right alone takes 0p8; linked again, all four take Top Left's 4 pt.+ let at = link(&h, 1);+ crate::test_window::click_at(&mut h, at);+ retype_beside(&mut h, "Top Right:", 0, "0p8");+ assert_eq!(field(&h, "borderCorners")[1]["size"], json!(8.0));+ assert_eq!(field(&h, "borderCorners")[0]["size"], json!(4.0));+ let at = link(&h, 1);+ crate::test_window::click_at(&mut h, at);+ let corners = field(&h, "borderCorners");+ assert!((0..4).all(|i| corners[i] == corners[0] && corners[i]["size"] == json!(4.0)), "{corners}");+ confirm(&mut h.state_mut().app).unwrap();+ let style = h.state().app.session.doc().unwrap().doc.styles.para("Ruled Child").cloned().unwrap();+ assert_eq!(style.para.border_weights, Some([3.0, 10.0, 3.0, 3.0]));+}++/// Paragraph Rules › Color offers Text Color above the swatches, so a rule set to a swatch can+/// go back to it; Gap Color lists only swatches.+#[test]+fn the_rule_colour_menu_offers_text_color() {+ let mut app = DesignApp::new(designcraft_engine::Session::new(), crate::Services::default());+ app.run("file.new", json!({})).unwrap();+ let doc = app.session.doc().unwrap().doc.clone();+ let menu = |ctx: &egui::Context, text: Option<&str>, click: Option<egui::Pos2>| {+ let mut picked = None;+ let mut labels = Vec::new();+ let mut events = Vec::new();+ if let Some(pos) = click {+ events.push(egui::Event::PointerMoved(pos));+ events.push(egui::Event::PointerButton { pos, button: egui::PointerButton::Primary, pressed: true, modifiers: Default::default() });+ events.push(egui::Event::PointerButton { pos, button: egui::PointerButton::Primary, pressed: false, modifiers: Default::default() });+ }+ let input =+ egui::RawInput { screen_rect: Some(egui::Rect::from_min_size(egui::Pos2::ZERO, egui::vec2(600.0, 600.0))), events, ..Default::default() };+ let mut out = ctx.run_ui(input, |ui| {+ picked = swatch_menu_with(ui, &doc, "m", "[Black]", 130.0, text);+ });+ out.textures_delta.clear();+ for s in out.shapes {+ if let egui::Shape::Text(t) = s.shape {+ labels.push((t.galley.job.text.clone(), t.visual_bounding_rect().center()));+ }+ }+ (picked, labels)+ };+ for text in [Some("Text Color"), None] {+ let ctx = egui::Context::default();+ let (_, labels) = menu(&ctx, text, None);+ let combo = labels.iter().find(|(t, _)| t == "[Black]").unwrap().1;+ menu(&ctx, text, Some(combo));+ let (_, labels) = menu(&ctx, text, None);+ let item = labels.iter().find(|(t, _)| t == "Text Color").map(|l| l.1);+ assert_eq!(item.is_some(), text.is_some(), "{labels:?}");+ if let Some(pos) = item {+ let (picked, _) = menu(&ctx, text, Some(pos));+ assert_eq!(picked.as_deref(), Some(designcraft_doc::TEXT_COLOR));+ }+ }+}++/// The course's chapter 20: a paragraph style's rule below becomes wavy, 3 pt, with a gap+/// colour, from Paragraph Rules › Type and Gap Color.+#[test]+fn paragraph_style_rules_take_a_type_and_a_gap_colour() {+ let (mut app, _) = ruled_paragraph();+ let ctx = egui::Context::default();+ app.ui.dialog = Some(Dialog::new("paragraphStyleOptions", json!({"name": "Ruled Child", "section": "rules", "rule": "ruleBelow"})));+ draw(&mut app, &ctx);+ if let Some(d) = app.ui.dialog.as_mut() {+ d.fields.insert("p.ruleBelow.type".into(), json!({"kind": "wavy"}));+ d.fields.insert("p.ruleBelow.weight".into(), json!(3.0));+ d.fields.insert("p.ruleBelow.gapColor".into(), json!("[Paper]"));+ }+ draw(&mut app, &ctx);+ confirm(&mut app).unwrap();+ let r = app.session.doc().unwrap().doc.styles.resolve_para_style("Ruled Child").0.rule_below;+ assert_eq!((r.kind, r.weight, r.gap_color.as_str()), (designcraft_doc::StrokeType::Wavy, 3.0, "[Paper]"));+}++/// A rule's Gap Tint shows 100% at its default (the rule's JSON leaves a full gap tint out).+#[test]+fn a_rules_default_gap_tint_shows_100() {+ use egui_kittest::kittest::Queryable;+ let (mut app, _) = ruled_paragraph();+ app.run(+ "style.paragraph.edit",+ json!({"name": "Ruled Child", "para": {"ruleBelow": {"type": {"kind": "dashed", "pattern": [4.0, 2.0]}, "gapColor": "[Paper]"}}}),+ )+ .unwrap();+ let mut h = crate::test_window::open(app, egui::vec2(1400.0, 900.0));+ h.state_mut().app.ui.dialog = Some(Dialog::new("paragraphStyleOptions", json!({"name": "Ruled Child", "section": "rules", "rule": "ruleBelow"})));+ h.run_steps(4);+ let label = h.get_by_label("Gap Tint:").rect();+ let field = h+ .get_all_by(|n| n.role() == egui::accesskit::Role::TextInput)+ .filter(|n| n.rect().center().x > label.max.x && (n.rect().center().y - label.center().y).abs() < 8.0)+ .min_by(|a, b| a.rect().min.x.total_cmp(&b.rect().min.x))+ .and_then(|n| n.value());+ assert_eq!(field.as_deref(), Some("100%"));+}++/// The course's chapter 20: the "Recipe Categories" title formatted on the page (size, All+/// Caps, tracking, space after), then New Paragraph Style from it: the dialog starts from the+/// text, and with Apply Style to Selection the paragraph takes the new style. Next Style and+/// Reset To Base are set from General.+#[test]+fn a_new_paragraph_style_starts_from_the_selected_text() {+ let mut app = DesignApp::new(designcraft_engine::Session::new(), crate::Services::default());+ app.run("file.new", json!({})).unwrap();+ let f = app.run("frame.create", json!({"rect": [36, 36, 400, 300], "content": "text", "text": "Egg Recipes\rBoil them."})).unwrap();+ app.run("text.select", json!({"story": f["story"], "anchor": 0, "focus": 11})).unwrap();+ app.run("type.char", json!({"attrs": {"size": 20, "capitalization": "allCaps", "tracking": 50}})).unwrap();+ app.run("type.para", json!({"attrs": {"spaceAfter": 6}})).unwrap();+ open_new_style(&mut app, true);+ let d = app.ui.dialog.clone().unwrap();+ assert_eq!(+ (d.fields["c.size"].clone(), d.fields["c.capitalization"].clone(), d.fields["p.spaceAfter"].clone()),+ (json!(20.0), json!("allCaps"), json!(6.0))+ );+ assert!(d.b("apply") && !d.fields.contains_key("c.fontFamily"), "only what differs from [No Paragraph Style]");+ if let Some(d) = app.ui.dialog.as_mut() {+ d.fields.insert("rename".into(), json!("Recipe Categories"));+ d.fields.insert("nextStyle".into(), json!(designcraft_doc::BASIC_PARAGRAPH));+ }+ confirm(&mut app).unwrap();+ let a = app.run("type.selectionAttrs", json!({})).unwrap();+ assert_eq!(a["paragraphStyle"], "Recipe Categories", "applied to the selection");+ assert_eq!(a["paraOverrides"].as_u64().unwrap_or(0) + a["charOverrides"].as_u64().unwrap_or(0), 0);+ let style = |app: &DesignApp| app.session.doc().unwrap().doc.styles.para("Recipe Categories").cloned().unwrap();+ assert_eq!(style(&app).next_style.as_deref(), Some(designcraft_doc::BASIC_PARAGRAPH));+ assert_eq!(style(&app).chars.size, Some(20.0));+ // Reset To Base: the style keeps nothing of its own, apart from the edits made then.+ app.ui.dialog = Some(Dialog::new("paragraphStyleOptions", json!({"name": "Recipe Categories", "basedOn": designcraft_doc::BASIC_PARAGRAPH})));+ if let Some(d) = app.ui.dialog.as_mut() {+ d.fields.insert("resetToBase".into(), json!(true));+ d.fields.insert("c.tracking".into(), json!(10.0));+ }+ confirm(&mut app).unwrap();+ let s = style(&app);+ assert_eq!((s.chars.size, s.chars.tracking, s.para.space_after), (None, Some(10.0), None), "{s:?}");+ assert_eq!(s.based_on.as_deref(), Some(designcraft_doc::BASIC_PARAGRAPH));+}++/// The course's chapter 22: "eggs" made bold and red on the page, then New Character Style+/// from it. The dialog is titled as InDesign's, starts from what the text has of its own+/// over its paragraph style ("[None] + Bold + color"), and Apply Style to Selection gives the+/// text the style, with no override left.+#[test]+fn a_new_character_style_starts_from_the_selected_text() {+ use egui_kittest::{Harness, kittest::Queryable};+ let mut app = DesignApp::new(designcraft_engine::Session::new(), crate::Services::default());+ app.run("file.new", json!({})).unwrap();+ let f = app.run("frame.create", json!({"rect": [36, 36, 400, 300], "content": "text", "text": "Drop eggs into boiling water."})).unwrap();+ app.run("text.select", json!({"story": f["story"], "anchor": 0, "focus": 29})).unwrap();+ app.run("style.paragraph.create", json!({"name": "Recipe", "chars": {"size": 14}})).unwrap();+ app.run("style.paragraph.apply", json!({"name": "Recipe"})).unwrap();+ app.run("text.select", json!({"story": f["story"], "anchor": 5, "focus": 9})).unwrap();+ app.run("type.char", json!({"attrs": {"fontStyle": "Bold", "fill": "C=15 M=100 Y=100 K=0"}})).unwrap();+ open_new_style(&mut app, false);+ let d = app.ui.dialog.clone().unwrap();+ assert_eq!((d.fields["c.fontStyle"].clone(), d.fields["c.fill"].clone()), (json!("Bold"), json!("C=15 M=100 Y=100 K=0")));+ assert!(d.b("apply"));+ let mut h = Harness::builder().with_size(egui::vec2(1000.0, 700.0)).build_ui_state(+ |ui, app: &mut DesignApp| {+ let key = egui::Id::unique("new_character_style_test_fonts");+ if ui.data(|d| d.get_temp::<bool>(key)).is_none() {+ crate::theme::install_fonts(ui.ctx(), "");+ ui.data_mut(|d| d.insert_temp(key, true));+ return;+ }+ show(app, ui.ctx());+ },+ app,+ );+ h.run_steps(4);+ for l in ["New Character Style", "Apply Style to Selection"] {+ assert!(h.query_by_label(l).is_some(), "{l}");+ }+ let app = h.state_mut();+ if let Some(d) = app.ui.dialog.as_mut() {+ d.fields.insert("rename".into(), json!("eggs"));+ }+ confirm(app).unwrap();+ let style = app.session.doc().unwrap().doc.styles.char_style("eggs").cloned().unwrap();+ assert_eq!((style.chars.font_style.as_deref(), style.chars.fill.as_deref()), (Some("Bold"), Some("C=15 M=100 Y=100 K=0")));+ assert_eq!(style.chars.size, None, "the size is the paragraph style's, not the text's own");+ let a = app.run("type.selectionAttrs", json!({})).unwrap();+ assert_eq!((a["characterStyle"].clone(), a["charOverrides"].clone()), (json!("eggs"), json!(0)), "applied to the selection");+}++/// A Based On changed in the dialog (without Reset To Base) is what the fields are checked+/// against: the style's own settings over the new parent.+#[test]+fn a_changed_based_on_is_what_the_fields_are_checked_against() {+ let mut app = DesignApp::new(designcraft_engine::Session::new(), crate::Services::default());+ app.run("file.new", json!({})).unwrap();+ app.run("style.paragraph.create", json!({"name": "Loose", "para": {"wordSpaceMin": 1.2, "wordSpaceDesired": 1.3}})).unwrap();+ app.run("style.paragraph.create", json!({"name": "Child", "basedOn": "Loose"})).unwrap();+ let mut d = Dialog::new("paragraphStyleOptions", json!({"name": "Child"}));+ d.fields.insert("p.wordSpaceDesired".into(), json!(1.0));+ assert!(check_paragraph_style_justification(&app, &d).is_err(), "below Loose's minimum");+ d.fields.insert("basedOn".into(), json!(designcraft_doc::BASIC_PARAGRAPH));+ assert_eq!(check_paragraph_style_justification(&app, &d), Ok(()), "[Basic Paragraph]'s minimum is lower");+}++/// With Reset To Base, the justification fields are checked against the base style (the+/// style's own minimum no longer applies), and Preview shows the reset on the page.+#[test]+fn reset_to_base_checks_and_previews_against_the_base() {+ let mut app = DesignApp::new(designcraft_engine::Session::new(), crate::Services::default());+ app.run("file.new", json!({})).unwrap();+ let f = app.run("frame.create", json!({"rect": [36, 36, 400, 300], "content": "text", "text": "Loose words"})).unwrap();+ app.run("text.select", json!({"story": f["story"], "anchor": 0, "focus": 5})).unwrap();+ app.run("style.paragraph.create", json!({"name": "Loose", "basedOn": designcraft_doc::BASIC_PARAGRAPH, "para": {"wordSpaceMin": 1.2, "wordSpaceDesired": 1.3}, "chars": {"size": 30}}))+ .unwrap();+ app.run("style.paragraph.apply", json!({"name": "Loose"})).unwrap();+ let mut d = Dialog::new("paragraphStyleOptions", json!({"name": "Loose"}));+ d.fields.insert("p.wordSpaceDesired".into(), json!(1.1));+ assert!(check_paragraph_style_justification(&app, &d).is_err(), "below the style's own minimum");+ d.fields.insert("resetToBase".into(), json!(true));+ assert_eq!(check_paragraph_style_justification(&app, &d), Ok(()), "the base's minimum is 100%");+ d.fields.insert("preview".into(), json!(true));+ style_options_preview(&mut app, &mut d);+ assert_eq!(d.fields[PREVIEWED]["resetToBase"], true);+ let size = app.run("type.selectionAttrs", json!({})).unwrap()["chars"]["size"].clone();+ assert_eq!(size, json!(12.0), "the page shows the style reset to its base");+ app.session.cancel_interaction();+}++/// The course's chapter 22: Find/Change › Change Format. "eggs", case sensitive, nothing in+/// Change to; Change Format Settings › Style Options sets Character Style "eggs", and the box+/// shows it (with Change to's ⓘ). Escape leaves the settings, not Find/Change. Change All+/// gives every lowercase "eggs" the style and keeps the words; the trash clears the format.+#[test]+fn find_change_gives_the_found_text_a_change_format() {+ use egui_kittest::{Harness, kittest::Queryable};+ let mut app = DesignApp::new(designcraft_engine::Session::new(), crate::Services::default());+ app.run("file.new", json!({})).unwrap();+ let text = "Poached Eggs\nBreak eggs; cook until eggs are set.";+ let f = app.run("frame.create", json!({"rect": [36, 36, 400, 300], "content": "text", "text": text})).unwrap();+ let sid = designcraft_doc::StoryId(f["story"].as_u64().unwrap());+ app.run("style.character.create", json!({"name": "eggs", "chars": {"fontStyle": "Bold"}})).unwrap();+ app.run("app.findChange", json!({})).unwrap();+ if let Some(d) = app.ui.dialog.as_mut() {+ d.fields.insert("find".into(), json!("eggs"));+ d.fields.insert("caseSensitive".into(), json!(true));+ }+ let mut h = Harness::builder().with_size(egui::vec2(1200.0, 900.0)).build_ui_state(+ |ui, app: &mut DesignApp| {+ let key = egui::Id::unique("change_format_test_fonts");+ if ui.data(|d| d.get_temp::<bool>(key)).is_none() {+ crate::theme::install_fonts(ui.ctx(), "");+ ui.data_mut(|d| d.insert_temp(key, true));+ return;+ }+ show(app, ui.ctx());+ },+ app,+ );+ h.run_steps(4);+ const TIP: &str = "With a Change Format and nothing in Change to, the found text stays and is only formatted";+ assert!(h.query_by_label("Change Format:").is_some());+ assert!(h.query_by_label(TIP).is_none(), "no ⓘ without a Change Format");+ h.get_by_label("Specify attributes to change").click();+ h.run_steps(3);+ // Style Options is the section's name in the list and its heading.+ for l in ["Change Format Settings", "Style Options", "Basic Character Formats", "Character Color"] {+ assert!(h.query_all_by_label(l).next().is_some(), "{l}");+ }+ // Style Options › Character Style: eggs.+ h.get_all_by_value("[Any Style]").next().unwrap().click();+ h.run_steps(3);+ h.get_by_label("eggs").click();+ h.run_steps(3);+ h.get_all_by_label(" OK ").last().unwrap().click();+ h.run_steps(3);+ let field = |h: &Harness<'_, DesignApp>, k: &str| h.state().ui.dialog.as_ref().unwrap().fields.get(k).cloned();+ assert_eq!((field(&h, CHANGE_FORMAT), field(&h, FORMAT_EDIT)), (Some(json!({"charStyle": "eggs"})), None));+ assert!(h.query_by_label("Character Style: eggs").is_some(), "the box shows it");+ assert!(h.query_by_label(TIP).is_some(), "Change to's ⓘ");+ // Escape closes Change Format Settings only, and keeps the Change Format.+ h.get_by_label("Specify attributes to change").click();+ h.run_steps(3);+ h.key_press(egui::Key::Escape);+ h.run_steps(3);+ assert_eq!(h.state().ui.dialog.as_ref().map(|d| d.id.as_str()), Some("findChange"));+ assert_eq!((field(&h, CHANGE_FORMAT), field(&h, FORMAT_EDIT)), (Some(json!({"charStyle": "eggs"})), None));+ // Change All: the words stay, every lowercase "eggs" has the style.+ h.get_by_label("Change All").click();+ h.run_steps(3);+ assert_eq!(field(&h, "status"), Some(json!("2 replacement(s) made")));+ let story = h.state().session.doc().unwrap().doc.story(sid).cloned().unwrap();+ assert_eq!(story.text, text);+ assert_eq!(+ [8, 19, 36].map(|at| story.format_after(at).style.clone()),+ [designcraft_doc::NO_CHAR_STYLE.to_string(), "eggs".into(), "eggs".into()]+ );+ // The trash clears it.+ h.get_by_label("Clear specified attributes").click();+ h.run_steps(3);+ assert_eq!(field(&h, CHANGE_FORMAT), None);+ assert!(h.query_by_label(TIP).is_none());+}++/// What Change Format Settings sets goes to find.change: a paragraph style and character+/// attributes as well as a character style; the box sums them up.+#[test]+fn a_change_format_goes_with_change_all() {+ let mut d = Dialog::new("findChange", json!({"find": "cook"}));+ d.fields.insert(CHANGE_FORMAT.into(), json!({"charStyle": "eggs", "paraStyle": "Method", "chars": {"underline": true}}));+ let p = find_change_params(&d);+ assert_eq!((p["charStyle"].clone(), p["paraStyle"].clone(), p["attrs"].clone()), (json!("eggs"), json!("Method"), json!({"underline": true})));+ assert_eq!(change_format_summary("en", d.fields.get(CHANGE_FORMAT)), "Character Style: eggs + Paragraph Style: Method + Underline: on");+ assert!(find_change_params(&Dialog::new("findChange", json!({"find": "cook"}))).get("attrs").is_none());+}++/// The course's chapter 26: Preferences › Interface as InDesign's. A Color Theme swatch shows+/// its theme at once and Cancel goes back; OK keeps the theme and the Tools panel's columns.+/// UI Size is in a UI Scaling section of its own.+#[test]+fn preferences_interface_sets_the_color_theme_and_tools_panel() {+ use crate::theme::Brightness;+ use egui::accesskit::Role;+ use egui_kittest::{Harness, kittest::Queryable};+ let mut app = DesignApp::new(designcraft_engine::Session::new(), crate::Services::default());+ app.run("file.new", json!({})).unwrap();+ let opened = app.ui.brightness;+ let open = |app: &mut DesignApp| {+ app.run("app.preferences", json!({})).unwrap();+ app.ui.dialog.as_mut().unwrap().fields.insert("section".into(), json!("interface"));+ };+ open(&mut app);+ let mut h = Harness::builder().with_size(egui::vec2(1100.0, 760.0)).build_ui_state(+ |ui, app: &mut DesignApp| {+ let key = egui::Id::unique("prefs_interface_test_fonts");+ if ui.data(|d| d.get_temp::<bool>(key)).is_none() {+ crate::theme::install_fonts(ui.ctx(), "");+ ui.data_mut(|d| d.insert_temp(key, true));+ return;+ }+ show(app, ui.ctx());+ },+ app,+ );+ h.run_steps(3);+ let swatch = |h: &Harness<'_, DesignApp>, name: &str| h.get_by(|n| n.role() == Role::RadioButton && n.label().as_deref() == Some(name)).click();+ for l in ["Appearance", "Color Theme:", "Panels", "Tools Panel:"] {+ assert!(h.query_by_label(l).is_some(), "{l}");+ }+ // A click shows the theme at once; Cancel goes back.+ swatch(&h, "Light");+ h.run_steps(3);+ assert_eq!(h.state().ui.brightness, Brightness::Light);+ h.get_by_label("Cancel").click();+ h.run_steps(3);+ assert!(h.state().ui.dialog.is_none());+ assert_eq!(h.state().ui.brightness, opened, "Cancel goes back to the theme Preferences opened with");+ // OK keeps the theme and the Tools panel's columns.+ open(h.state_mut());+ h.run_steps(3);+ swatch(&h, "Dark");+ h.run_steps(2);+ h.get_by(|n| n.role() == Role::ComboBox && n.value().as_deref() == Some("Single Column")).click();+ h.run_steps(2);+ h.get_by_label("Double Column").click();+ h.run_steps(2);+ h.get_by_label(" OK ").click();+ h.run_steps(3);+ assert!(h.state().ui.dialog.is_none());+ assert_eq!(h.state().ui.brightness, Brightness::Dark);+ assert!(h.state().ui.tools_double_column);+ // The same command the Window menu toggles, with an explicit state for Preferences.+ assert_eq!(h.state_mut().run("window.toolsDoubleColumn", json!({"on": false})).unwrap(), json!(false));+ assert_eq!(h.state_mut().run("window.toolsDoubleColumn", json!({"on": false})).unwrap(), json!(false), "set, not toggled");+ assert_eq!(h.state_mut().run("window.toolsDoubleColumn", json!({})).unwrap(), json!(true), "toggled without `on`");+ // UI Size has a section of its own.+ open(h.state_mut());+ h.state_mut().ui.dialog.as_mut().unwrap().fields.insert("section".into(), json!("uiScaling"));+ h.run_steps(3);+ assert!(h.query_by_label("UI Size:").is_some());+}+++ /// With no document open, Preferences has Units & Increments, as InDesign's: OK keeps them+ /// for new documents, and New Document opens in them (Lollo's inches, set once).+ #[test]+ fn preferences_with_no_document_set_the_units_of_new_documents() {+ let mut app = DesignApp::new(designcraft_engine::Session::new(), crate::Services::default());+ crate::menus::activate(&mut app, "app.preferences", &Value::Null);+ let mut d = app.ui.dialog.take().expect("Preferences");+ assert!(d.b("defaults"), "for new documents");+ let ctx = dialog_context("en");+ let screen = egui::Rect::from_min_size(egui::Pos2::ZERO, egui::vec2(1178.0, 814.0));+ app.ui.dialog = Some(d.clone());+ let mut labels = vec![];+ for _ in 0..3 {+ labels = dialog_frame(&mut app, &ctx, screen, vec![]);+ }+ assert!(labels.iter().any(|(t, _, _)| t == "Units & Increments"), "listed with no document: {labels:?}");+ d.fields.insert("horizontalUnits".into(), json!("inches"));+ d.fields.insert("verticalUnits".into(), json!("inches"));+ d.fields.insert("keyboardIncrement".into(), json!("0.5 pt"));+ app.ui.dialog = Some(d);+ confirm(&mut app).unwrap();+ let du = app.session.prefs.default_units;+ assert_eq!((du.horizontal_units, du.vertical_units, du.keyboard_increment), (Unit::Inches, Unit::Inches, 0.5));+ assert!(app.session.active().is_none(), "no document made");+ // A Cursor Key of 0 or text that isn't a measure is refused, keeping the dialog open and+ // the saved values, the other preferences' too; a Kerning/Tracking of 0.5 is kept as it is.+ let scale = app.session.prefs.scale_strokes;+ for bad in [json!({"keyboardIncrement": "0 pt"}), json!({"keyboardIncrement": "wide"}), json!({"kerningIncrement": "lots"})] {+ let mut d = Dialog::new("preferences", json!({"defaults": true, "horizontalUnits": "inches", "scaleStrokes": !scale}));+ for (k, v) in bad.as_object().unwrap() {+ d.fields.insert(k.clone(), v.clone());+ }+ app.ui.dialog = Some(d);+ assert!(confirm(&mut app).is_err(), "{bad}");+ assert!(app.ui.dialog.as_ref().is_some_and(|d| d.id == "preferences"), "still open: {bad}");+ assert_eq!(app.session.prefs.default_units.keyboard_increment, 0.5, "{bad}");+ assert_eq!(app.session.prefs.scale_strokes, scale, "no other preference saved: {bad}");+ }+ app.ui.dialog = Some(Dialog::new("preferences", json!({"defaults": true, "horizontalUnits": "inches", "kerningIncrement": "0.5"})));+ confirm(&mut app).unwrap();+ assert_eq!(app.session.prefs.default_units.kerning_increment, 0.5, "not rounded up to 1");+ // New Document opens in inches, and the document it makes has inch rulers.+ crate::menus::activate(&mut app, "app.newDocumentDialog", &Value::Null);+ let nd = app.ui.dialog.clone().expect("New Document");+ assert_eq!(nd.fields["units"], json!("inches"));+ assert_eq!(nd.s("width"), designcraft_geom::format_measure(612.0, Unit::Inches));+ confirm(&mut app).unwrap();+ let st = &app.session.doc().unwrap().doc.settings;+ assert_eq!((st.horizontal_units, st.vertical_units, st.keyboard_increment), (Unit::Inches, Unit::Inches, 0.5));+ // With the document open, Preferences edits that document's units, not the defaults.+ crate::menus::activate(&mut app, "app.preferences", &Value::Null);+ assert!(!app.ui.dialog.as_ref().unwrap().b("defaults"));+ }