DesignCraft: An open-source page and layout design editor written by scratch in pure Rust
Merge PR #1461: Text Frame Options
aionggf2389b791ccc
diff --cc ROADMAP.mdindex 4c925cd23,21c37d7ec..bddc748fc--- a/ROADMAP.md+++ b/ROADMAP.md@@@ -460,38 -455,7 +460,39 @@@ Newest first- **2026-10-16** · Lock Guides and Lock Column Guides are commands in View ▸ Grids & Guides (`view.lockGuides`, ⌥⌘;, and `view.lockColumnGuides`), so the control channel and MCP reach them. Lock Column Guides is an undo step, is saved with the document, on in new ones, and read from and written to IDML's `ColumnGuideLocked`, which export always wrote as locked (#1096). No readiness percentage change.- **2026-10-16** · IDML: a page keeps column guides that were dragged off centre (InDesign's Custom columns). They were divided evenly on import, so the gutter sprang back to the middle; the imported positions now place the columns, with the canvas guides, snapping and text placement following them, and they are written back on export. Layout › Margins and Columns re-divides them evenly when the count or gutter changes, as InDesign's does. No readiness percentage change.- **2026-10-16** · IDML: custom column positions are checked before they are used (#1096). A set must give two edges per column, ascending from the left margin to the right one; any other (a wrong count, unsorted or non-numeric values, a list longer than 216 columns allow, or positions left behind by a margin or page-size change) is the even split, in the canvas, on import and on export, instead of columns drawn outside the margins. No readiness percentage change.+- **2026-10-21** · Paragraph Border and Paragraph Shading link their four sides as InDesign's: the stroke weights, offsets and corners have the "Make all settings the same" link, on when the four are the same, so a side typed in sets all four; with the link off a side is set alone (a border with only a thick left side). Found in the Learn Skills Daily course, chapter 40. No readiness percentage change.+- **2026-10-21** · Paragraph rules have InDesign's Type (solid, thick/thin stripes, dashed, dotted, straight hash, wavy, or a stroke style of the document), Gap Color and Gap Tint, and Keep In Frame (rule above); the Paragraph Rules page is laid out as InDesign's (Weight and Type, Color and Tint, Gap Color and Gap Tint, Width and Offset, Left and Right Indent). IDML reads and writes them (`RuleAboveType`, `RuleBelowGapColor`, `KeepRuleAboveInFrame`…). Found in the Learn Skills Daily course, chapter 20. No readiness percentage change.+- **2026-10-21** · New Character Style with text selected starts from what the text has of its own over its paragraph style, as InDesign's ("[None] + Bold + color"), and Apply Style to Selection gives the text the new style, with no override left. A new style's dialog is titled New Paragraph Style / New Character Style. `type.selectionAttrs` reports the text's own character attributes (`ownChars`). Found in the Learn Skills Daily course, chapter 22. No readiness percentage change.+- **2026-10-21** · New Paragraph Style with text selected starts from it, as InDesign's (Based On [No Paragraph Style], every setting of the text that differs) and Apply Style to Selection gives the paragraph the new style; General has Next Style and Reset To Base; Basic Character Formats is in two columns (Size | Leading, Kerning | Tracking, Case | Position). `style.paragraph.edit` honours `nextStyle` (it was ignored) and takes `resetToBase`. Found in the Learn Skills Daily course, chapter 20. No readiness percentage change.+- **2026-10-21** · Find/Change has InDesign's Change and Change/Find: Change changes the text Find Next found and keeps it selected, Change/Find also finds the next match, and the search keeps its domain (a selection or story) across them. The Search list reads Document, Story and Selection. `find.change` takes `found`. Found in the Learn Skills Daily course, chapter 22. No readiness percentage change.+- **2026-10-21** · Find/Change has InDesign's Find Format: Specify Attributes opens Find Format Settings (the same Style Options and character sections as Change Format Settings), and only text with the format is found. With nothing in Find what, each stretch of text with the format is found, so Change All can restyle every word in a character style. `find.find`, `find.next` and `find.change` take `findFormat {charStyle?, paraStyle?, chars?}`. Found in the Learn Skills Daily course, chapter 22. No readiness percentage change.+- **2026-10-21** · Find/Change has InDesign's Change Format. Specify Attributes opens Change Format Settings: Style Options (the character and paragraph style to apply, [Any Style] for none), then Basic and Advanced Character Formats, Character Color, OpenType Features, Underline and Strikethrough Options. The box shows the format ("Character Style: eggs"), and Change All gives it to the changed text. With a Change Format and nothing in Change to, the found text stays and is only formatted, as InDesign's (an ⓘ beside Change to says so). `find.change` takes `charStyle` and `paraStyle`. Found in the Learn Skills Daily course, chapter 22. No readiness percentage change.+- **2026-10-21** · Preferences › Interface follows InDesign's: Appearance has a Color Theme swatch per interface theme (a click shows it at once, Cancel goes back) and Panels sets the Tools panel to a single or double column; UI Size moves to a UI Scaling section of its own. Interface held only UI Size, and the theme could be changed only from the Window menu. Found in the Learn Skills Daily course, chapter 26. No readiness percentage change.+- **2026-10-21** · Preferences › File Handling shows Number of Recent Items to Display as a whole number ("20"; it read "20.0"). Found in the Learn Skills Daily course, chapter 26. No readiness percentage change.+- **2026-10-21** · Insert Pages… opens InDesign's dialog: Pages, Insert (After Page, Before Page, At Start of Document, At End of Document) with the page by name, and Parent ([None] or a parent), set to the page in view and its parent. It was a form asking for a page index and a parent id, and pages could not go before the first page; `layout.pages.insert` takes `before` (0: at the start). Found in the Learn Skills Daily course, chapter 25. No readiness percentage change.+- **2026-10-21** · Spelling (Check Spelling and Dynamic Spelling) no longer flags everyday words the bundled hyphenation word list lacks: "we", "us", "if", titles such as "Mr", and words such as email, online, website, database, desktop and download, with their plurals and other forms. Contractions typed with a typographer's apostrophe (don’t, we’re), which Use Typographer's Quotes produces by default, count like their straight-apostrophe forms. Dynamic Spelling used to underline most words of an ordinary sentence. Found in the Learn Skills Daily course, chapter 26. No readiness percentage change.+- **2026-10-21** · While a parent is shown, the status bar's page box and Properties › Page name it ("A-Parent") instead of page 1, as InDesign's; their lists have the parents after the pages, and choosing one shows that parent (a page leaves the parents). Found in the Learn Skills Daily course, chapter 25. No readiness percentage change.+- **2026-10-21** · Effects dialog: the Angle field of the shadows, Bevel and Emboss, Satin and Gradient Feather has InDesign's dial beside it, its radius pointing where the light comes from; a click or drag on it sets the angle. Found in the Learn Skills Daily course, chapter 14. No readiness percentage change.+- **2026-10-21** · A double-click on a Fill or Stroke chip of Properties › Appearance opens the Color Picker with its colour, as in InDesign (a click still opens the swatches); for selected text, its own chips open it for the text. Found in the Learn Skills Daily course, chapter 23. No readiness percentage change.+- **2026-10-20** · Properties › Appearance: with several text frames selected, the Fill and Stroke popups offer Apply To Frame or Text, as with one frame, so their text can be coloured at once, as in InDesign. No readiness percentage change.+- **2026-10-20** · Properties › Appearance: the arrow beside Opacity opens a slider under the field, as in InDesign, instead of the Effects panel; a drag shows the opacity live and is one undo step (the Opacity link still opens Effects). No readiness percentage change.+- **2026-10-20** · Properties › Frame Fitting has InDesign's Auto-Fit checkbox and Options button (Frame Fitting Options); the app's checkboxes are now named and ticked-or-not for screen readers. No readiness percentage change.+- **2026-10-20** · Properties › Text Wrap shows the four wrap offsets under the wrap buttons, with the link that makes them the same, as InDesign's Properties panel does (greyed with no wrap). No readiness percentage change.+- **2026-10-21** · Properties › Bullets and Numbering › Options opens the Bullets and Numbering dialog for the selected paragraphs, as InDesign's, instead of the Paragraph panel. Found in the Learn Skills Daily course, chapter 21. No readiness percentage change.+- **2026-10-20** · Properties › Appearance: the corner shape list shows each shape's glyph beside its name, drawn as InDesign draws them (Fancy has its own glyph now), and the stroke type list shows each type's line; both dropdowns are named for screen readers. No readiness percentage change.+- **2026-10-21** · Properties › Align: the Align To button shows what the objects align to, one glyph each for the selection, the key object, the margins, the page and the spread, as InDesign's. Found in the Learn Skills Daily course, chapter 12. No readiness percentage change.+- **2026-10-20** · Object › Corner Options opens a Corner Options dialog laid out as InDesign's: each corner's size and shape, the link button that makes all four the same, and Preview. The Corner link in Properties › Appearance opens it too (it opened a Rectangle size dialog). No readiness percentage change.+- **2026-10-20** · The Object menu is in InDesign's order and groups; Paths has Join, Open Path and Close Path (Convert Shape lists only shapes, as InDesign's does) and a Convert Point submenu (Plain, Corner, Smooth, Symmetrical) is added. No readiness percentage change.+- **2026-10-20** · Layout › Create Guides puts its guides on both pages of the spread in view, as InDesign does; "This page" in Apply to narrows them to one page. No readiness percentage change.+- **2026-10-21** · Object › Fitting › Clear Frame Fitting Options (`object.clearFittingOptions`): the frames' auto-fit, crop amounts and reference point go back to their defaults, and the picture stays where it is. The Fitting submenu is grouped as InDesign's. Found in the Learn Skills Daily course, chapter 11. No readiness percentage change.+- **2026-10-21** · Swatches panel rows show InDesign's columns, drawn in code: a crossed pencil on the swatches that can't be edited ([None], [Registration], [Black]), the colour type (process or spot) and the colour mode (CMYK, RGB, Gray, or [None]'s and [Registration]'s own glyphs), in place of a lock and "CMYK" text. Tint reads 100 with nothing selected. No readiness percentage change.+- **2026-10-21** · With a gradient fill or stroke, the Color panel shows the stop selected in the Gradient panel (the stop before a selected midpoint) with its values, and its C/M/Y/K or R/G/B sliders and spectrum colour that stop, keeping the others, as in InDesign. It showed "[None] — choose a colour on the ramp", and a spectrum click replaced the whole gradient with a flat colour. Found in the Learn Skills Daily course, chapter 24. No readiness percentage change.+- **2026-10-20** · A new document's Swatches panel lists InDesign's defaults: [None], [Registration], [Paper], [Black] and six process colours (C=100, M=100, Y=100, C=15 M=100 Y=100, C=75 M=5 Y=100, C=100 M=90 Y=10); the extra M=100 Y=100, C=100 Y=100 and C=100 M=100 swatches are gone. No readiness percentage change.+- **2026-10-21** · The readout beside the cursor while drawing or measuring ("W: 3.13 cm") is InDesign's light grey box with white text, measured from the tutorials' frames; High Contrast keeps it black. It was a dark translucent box. No readiness percentage change.+- **2026-10-20** · Drawing a frame or shape shows its width and height in the document's ruler units, to two decimals and on two lines ("W: 6.08 cm", "H: 6.08 cm"), as InDesign does; it was always whole points. No readiness percentage change.+- **2026-10-20** · Type tool: a drag that starts in an empty frame draws a new text frame over it, as in InDesign; a click still turns the frame into a text frame. No readiness percentage change.+- **2026-10-20** · Measures in centimetres show four decimals, as InDesign's fields do (a 1p gutter reads 0.4233 cm, not 0.423 cm). No readiness percentage change.+ - **2026-10-21** · Text Frame Options is laid out as InDesign's, with Preview: General, Column Rules, Baseline Options, Auto-Size; framed Columns (Number and Width, Gutter and Maximum, Balance Columns), Inset Spacing (Top/Bottom, the link, Left/Right) and Vertical Justification (Align, Paragraph Spacing Limit) with spinner fields; Fixed Number shows each column's width as the fields change. Preview shows the change on the page until OK (one undo step) or Cancel. Justify honours the Paragraph Spacing Limit (`paragraphSpacingLimit` on `object.textFrameOptions`): the space goes between paragraphs up to the limit, the rest between lines. Found in the Learn Skills Daily course, chapter 18. No readiness percentage change.- **2026-10-21** · Properties › Character and Paragraph: ••• (More Options) expands the section in place, as InDesign's: Character adds vertical and horizontal scale, baseline shift, skew, language and OpenType, and All Caps, Small Caps, Superscript, Subscript, Underline and Strikethrough; Paragraph adds the left, right, first line and last line indents, space before and after, the drop cap's lines and characters, Align to Baseline Grid and Hyphenate. It used to open the Character or Paragraph panel; the language field moved under ••• as in InDesign. Found in the Learn Skills Daily course, chapter 16. No readiness percentage change.- **2026-10-21** · The text Control panel has InDesign's two modes: A (Character Formatting Controls: font and style, size and leading, All Caps/Superscript/Underline and Small Caps/Subscript/Strikethrough, kerning and tracking, vertical and horizontal scale, baseline shift and skew, character style and language) and ¶ (Paragraph Formatting Controls: the nine alignments, left/first line and right/last line indents, space before and after, the drop cap's lines and characters, paragraph style, Hyphenate and Align to Baseline Grid). It used to show a fixed mix of both. Found in the Learn Skills Daily course, chapter 16. No readiness percentage change.- **2026-10-20** · With the Type tool, the Control panel's font size, leading and tracking fields have a spinner and a list of common values, as in InDesign (auto leading in parentheses). No readiness percentage change.diff --cc crates/ui-egui/src/dialogs.rsindex bd99d9222,67e0cf291..f6302ddd5--- a/crates/ui-egui/src/dialogs.rs+++ b/crates/ui-egui/src/dialogs.rs@@@ -238,90 -186,65 +238,149 @@@ fn color_theme(app: &DesignApp, ui: &mumod color_theme_tests {use super::*;+ /// A page past the end shows as the last page in the dialog, and Before Page puts the new+ /// page before that one rather than at the end.+ #[test]+ fn insert_pages_before_a_page_past_the_end_goes_before_the_last() {+ let mut app = DesignApp::new(designcraft_engine::Session::new(), crate::Services::default());+ app.run("file.new", json!({"pages": 4, "facingPages": false})).unwrap();+ let ids = |app: &DesignApp| {+ let d = &app.session.doc().unwrap().doc;+ (0..d.page_count()).map(|i| d.page(i).unwrap().id).collect::<Vec<_>>()+ };+ let old = ids(&app);+ app.ui.dialog = Some(Dialog::new("insertPages", json!({"count": 1, "insert": "before", "page": 100, "parent": ""})));+ confirm(&mut app).unwrap();+ let now = ids(&app);+ assert_eq!(now.len(), 5);+ assert_eq!((now[..3].to_vec(), now[4]), (old[..3].to_vec(), old[3]), "the new page is fourth, before the old last page");+ }++ /// The course's chapter 25: Insert Pages as InDesign's. It opens after the page in view with+ /// that page's parent; At Start of Document with B-Cover puts a B page first, and Before Page+ /// with [None] puts a page without a parent before the page chosen.+ #[test]+ fn insert_pages_goes_before_a_page_or_at_the_start_with_the_chosen_parent() {+ use egui::accesskit::Role;+ use egui_kittest::{Harness, kittest::Queryable};+ let mut app = DesignApp::new(designcraft_engine::Session::new(), crate::Services::default());+ // Facing: [1] [2 3] [4].+ app.run("file.new", json!({"pages": 4})).unwrap();+ let b = app.run("layout.parents.new", json!({"prefix": "B", "name": "Cover"})).unwrap()["id"].as_u64().unwrap();+ let ids = |app: &DesignApp| -> Vec<u64> {+ let d = &app.session.doc().unwrap().doc;+ (0..d.page_count()).map(|i| d.page(i).unwrap().id.0).collect()+ };+ let old = ids(&app);+ crate::menus::activate(&mut app, "layout.pages.insert", &Value::Null);+ assert_eq!(app.ui.dialog.as_ref().unwrap().id, "insertPages");+ let mut h = Harness::builder().with_size(egui::vec2(1000.0, 700.0)).build_ui_state(+ |ui, app: &mut DesignApp| {+ let key = egui::Id::unique("insert_pages_test_fonts");+ if ui.data(|d| d.get_temp::<bool>(key)).is_none() {+ crate::theme::install_fonts(ui.ctx(), "");+ ui.data_mut(|d| d.insert_temp(key, true));+ return;+ }+ show(app, ui.ctx());+ },+ app,+ );+ h.run_steps(3);+ for l in ["Pages:", "Insert:", "Parent:"] {+ assert!(h.query_by_label(l).is_some(), "{l}");+ }+ // The dropdown showing `shown`, then its item `choice`.+ let pick = |h: &mut Harness<'_, DesignApp>, shown: &str, choice: &str| {+ h.get_by(|n| n.role() == Role::ComboBox && n.value().as_deref() == Some(shown)).click();+ h.run_steps(2);+ h.get_by_label(choice).click();+ h.run_steps(2);+ };+ // After page 1 with A, at first; then At Start of Document, with B-Cover.+ pick(&mut h, "After Page", "At Start of Document");+ pick(&mut h, "A-Parent", "B-Cover");+ h.get_by_label(" OK ").click();+ h.run_steps(3);+ assert!(h.state().ui.dialog.is_none());+ let now = ids(h.state());+ assert_eq!(now[1..], old[..], "the new page is first");+ let parent = |app: &DesignApp, i: usize| app.session.doc().unwrap().doc.page(i).unwrap().parent.map(|p| p.0);+ assert_eq!(parent(h.state(), 0), Some(b));+ // Before page 4, with [None].+ crate::dialogs::open_insert_pages(h.state_mut(), 0);+ h.run_steps(3);+ pick(&mut h, "After Page", "Before Page");+ pick(&mut h, "1", "4");+ pick(&mut h, "B-Cover", "[None]");+ h.get_by_label(" OK ").click();+ h.run_steps(3);+ let then = ids(h.state());+ assert_eq!(then.len(), 6);+ assert_eq!(then[..3], now[..3], "the pages before it stay");+ assert_eq!(then[4..], now[3..], "page 4 and those after it follow the new page");+ assert_eq!(parent(h.state(), 3), None);+ }++ /// The course's chapter 18: Text Frame Options with Preview on shows the columns and the+ /// inset on the page while the dialog is open; Cancel puts the frame back, OK sets them as one+ /// undo step. The Paragraph Spacing Limit is set from the dialog too.+ #[test]+ fn text_frame_options_preview_shows_the_change_until_ok_or_cancel() {+ let mut app = crate::DesignApp::new(designcraft_engine::Session::new(), crate::Services::default());+ app.run("file.new", json!({})).unwrap();+ let r = app.run("frame.create", json!({"rect": [36, 36, 336, 236], "content": "text", "text": "Hello"})).unwrap();+ let id = designcraft_doc::ItemId(r["id"].as_u64().unwrap());+ app.run("selection.set", json!({"ids": [id.0]})).unwrap();+ let opts = |app: &DesignApp| app.session.doc().unwrap().doc.item(id).unwrap().text_frame().unwrap().options.clone();+ let open = |app: &mut DesignApp| {+ let mut d = Dialog::new("textFrameOptions", json!({}));+ seed_text_frame_options(app, &mut d);+ d+ };+ let mut d = open(&mut app);+ d.fields.insert("columns".into(), json!("3"));+ d.fields.insert("preview".into(), json!(true));+ text_frame_preview(&mut app, &mut d);+ assert_eq!(opts(&app).columns, 3, "previewed on the page");+ d.fields.insert("insetTop".into(), json!("1p0"));+ text_frame_preview(&mut app, &mut d);+ assert_eq!((opts(&app).columns, opts(&app).inset[0]), (3, 12.0), "redone when a field changes");+ d.fields.insert("preview".into(), json!(false));+ text_frame_preview(&mut app, &mut d);+ assert_eq!(opts(&app).columns, 1, "Preview off: the page as it was");+ // A value OK would refuse: the page goes back while the status says why.+ d.fields.insert("preview".into(), json!(true));+ text_frame_preview(&mut app, &mut d);+ assert_eq!(opts(&app).columns, 3);+ let gutter = d.fields.get("gutter").cloned().unwrap_or_default();+ d.fields.insert("gutter".into(), json!("wide"));+ text_frame_preview(&mut app, &mut d);+ assert_eq!(opts(&app).columns, 1, "the page as it was");+ assert!(!d.fields.contains_key(PREVIEWED) && !d.s("status").is_empty());+ d.fields.insert("gutter".into(), gutter);+ d.fields.remove("status");+ // Cancel after a preview: back as it was.+ d.fields.insert("preview".into(), json!(true));+ text_frame_preview(&mut app, &mut d);+ app.ui.dialog = Some(d);+ cancel(&mut app);+ assert_eq!(opts(&app).columns, 1);+ // OK after a preview: set once, one undo step.+ let mut d = open(&mut app);+ d.fields.insert("columns".into(), json!("2"));+ d.fields.insert("verticalJustification".into(), json!("justify"));+ d.fields.insert("paragraphSpacingLimit".into(), json!("2p0"));+ d.fields.insert("preview".into(), json!(true));+ text_frame_preview(&mut app, &mut d);+ app.ui.dialog = Some(d);+ confirm(&mut app).unwrap();+ let o = opts(&app);+ assert_eq!((o.columns, o.vj_paragraph_spacing_limit), (2, 24.0));+ app.run("edit.undo", json!({})).unwrap();+ assert_eq!(opts(&app).columns, 1, "one undo step");+ }+#[test]fn color_theme_cancel_is_read_only_and_confirm_adds_the_preview() {let mut app = DesignApp::new(designcraft_engine::Session::new(), crate::Services::default());diff --cc crates/ui-egui/src/i18n/ar.rsindex b507d292c,da173f658..fff828274--- a/crates/ui-egui/src/i18n/ar.rs+++ b/crates/ui-egui/src/i18n/ar.rs@@@ -32,48 -31,8 +32,50 @@@ pub(super) const TABLE: &[(&str, &str)("Cut", "قص"),("Copy", "نسخ"),("Paste", "لصق"),+ ("Keep In Frame", "الإبقاء داخل الإطار"),+ ("New Paragraph Style", "نمط فقرة جديد"),+ ("New Character Style", "نمط حرف جديد"),+ ("Next Style:", "النمط التالي:"),+ ("[Same style]", "[النمط نفسه]"),+ ("Reset To Base", "إعادة التعيين إلى الأساس"),+ ("Apply Style to Selection", "تطبيق النمط على التحديد"),+ ("Change/Find", "تغيير/بحث"),+ ("Find Format:", "البحث عن تنسيق:"),+ ("Find Format Settings", "إعدادات البحث عن تنسيق"),+ ("Specify attributes to find", "تحديد السمات المراد البحث عنها"),+ (+ "With a Find Format, only text that has it is found; with nothing in Find what, all text that has it",+ "مع تنسيق للبحث، يُعثر فقط على النص الذي يحمله؛ وإذا كان حقل «البحث عن» فارغًا، فعلى كل نص يحمله",+ ),+ ("Change Format:", "تغيير التنسيق:"),+ ("Change Format Settings", "إعدادات تغيير التنسيق"),+ ("Style Options", "خيارات النمط"),+ ("[Any Style]", "[أي نمط]"),+ ("Specify attributes to change", "تحديد السمات المراد تغييرها"),+ ("Clear specified attributes", "مسح السمات المحددة"),+ (+ "With a Change Format and nothing in Change to, the found text stays and is only formatted",+ "مع تنسيق للتغيير وحقل «تغيير إلى» فارغ، يبقى النص الذي تم العثور عليه ويتغير تنسيقه فقط",+ ),+ ("Double Column", "عمود مزدوج"),+ ("Tools Panel:", "لوحة الأدوات:"),+ ("Color Theme:", "سمة الألوان:"),+ ("At End of Document", "في نهاية المستند"),+ ("At Start of Document", "في بداية المستند"),+ ("Before Page", "قبل الصفحة"),+ ("After Page", "بعد الصفحة"),+ ("Parent:", "الصفحة الأصلية:"),+ ("Insert:", "إدراج:"),+ ("Stroke Type", "نوع الحد"),+ ("Corner Shape", "شكل الزاوية"),+ ("Corner Size and Shape:", "حجم الزوايا وشكلها:"),+ ("Join", "وصل"),+ ("Convert Point", "تحويل النقطة"),+ ("New Section", "قسم جديد"),+ ("Clear Frame Fitting Options", "مسح خيارات ملاءمة الإطار"),+ ("Cannot be edited", "غير قابل للتحرير"),+ ("Maximum:", "الحد الأقصى:"),+ ("Paragraph Spacing Limit:", "حد تباعد الفقرات:"),("Restart Numbering", "إعادة الترقيم"),("Continue Numbering", "متابعة الترقيم"),("Keep Options…", "خيارات الإبقاء…"),diff --cc crates/ui-egui/src/i18n/cs.rsindex c2c977876,3708b7271..fea049b3f--- a/crates/ui-egui/src/i18n/cs.rs+++ b/crates/ui-egui/src/i18n/cs.rs@@@ -33,52 -32,8 +33,54 @@@ pub(super) const TABLE: &[(&str, &str)("Cut", "Vyjmout"),("Copy", "Kopírovat"),("Paste", "Vložit"),+ ("Keep In Frame", "Zachovat v rámečku"),+ ("Gap Tint:", "Odstín mezery:"),+ ("New Paragraph Style", "Nový styl odstavce"),+ ("New Character Style", "Nový styl znaku"),+ ("Next Style:", "Další styl:"),+ ("[Same style]", "[Stejný styl]"),+ ("Reset To Base", "Obnovit podle základu"),+ ("Apply Style to Selection", "Použít styl na výběr"),+ ("Change/Find", "Změnit/Najít"),+ ("Find Format:", "Hledat formát:"),+ ("Find Format Settings", "Nastavení hledání formátu"),+ ("Specify attributes to find", "Určit atributy k hledání"),+ (+ "With a Find Format, only text that has it is found; with nothing in Find what, all text that has it",+ "S formátem hledání se najde jen text, který ho má; s prázdným polem „Najít“ veškerý text, který ho má",+ ),+ ("Change Format:", "Změnit formát:"),+ ("Change Format Settings", "Nastavení změny formátu"),+ ("Style Options", "Volby stylu"),+ ("[Any Style]", "[Libovolný styl]"),+ ("Specify attributes to change", "Určit atributy ke změně"),+ ("Clear specified attributes", "Vymazat určené atributy"),+ (+ "With a Change Format and nothing in Change to, the found text stays and is only formatted",+ "Se změnou formátu a prázdným polem „Změnit na“ nalezený text zůstane a změní se jen jeho formát",+ ),+ ("Double Column", "Dvojitý sloupec"),+ ("Single Column", "Jednoduchý sloupec"),+ ("Tools Panel:", "Panel nástrojů:"),+ ("Color Theme:", "Barevný motiv:"),+ ("At End of Document", "Na konec dokumentu"),+ ("At Start of Document", "Na začátek dokumentu"),+ ("Before Page", "Před stránku"),+ ("After Page", "Za stránku"),+ ("Parent:", "Vzor:"),+ ("Insert:", "Vložit:"),+ ("Stroke Type", "Typ tahu"),+ ("Corner Shape", "Tvar rohu"),+ ("Corner Size and Shape:", "Velikost a tvar rohů:"),+ ("Join", "Spojit"),+ ("Convert Point", "Převést bod"),+ ("Plain", "Obyčejný"),+ ("Symmetrical", "Symetrický"),+ ("New Section", "Nový oddíl"),+ ("Clear Frame Fitting Options", "Vymazat volby přizpůsobení rámečku"),+ ("Cannot be edited", "Nelze upravit"),+ ("Maximum:", "Maximum:"),+ ("Paragraph Spacing Limit:", "Limit mezer mezi odstavci:"),("Restart Numbering", "Začít číslování znovu"),("Continue Numbering", "Pokračovat v číslování"),("Keep Options…", "Volby zachování…"),diff --cc crates/ui-egui/src/i18n/it.rsindex 2976a4df3,dcf8561ea..513592c62--- a/crates/ui-egui/src/i18n/it.rs+++ b/crates/ui-egui/src/i18n/it.rs@@@ -30,49 -29,8 +30,51 @@@ pub(super) const TABLE: &[(&str, &str)("Cut", "Taglia"),("Copy", "Copia"),("Paste", "Incolla"),+ ("Keep In Frame", "Mantieni nella cornice"),+ ("New Paragraph Style", "Nuovo stile di paragrafo"),+ ("New Character Style", "Nuovo stile di carattere"),+ ("Next Style:", "Stile successivo:"),+ ("[Same style]", "[Stesso stile]"),+ ("Reset To Base", "Ripristina base"),+ ("Apply Style to Selection", "Applica stile alla selezione"),+ ("Change/Find", "Sostituisci/Trova"),+ ("Find Format:", "Trova formato:"),+ ("Find Format Settings", "Impostazioni di ricerca formato"),+ ("Specify attributes to find", "Specifica gli attributi da trovare"),+ (+ "With a Find Format, only text that has it is found; with nothing in Find what, all text that has it",+ "Con un formato di ricerca si trova solo il testo che lo ha; con «Trova» vuoto, tutto il testo che lo ha",+ ),+ ("Change Format:", "Modifica formato:"),+ ("Change Format Settings", "Impostazioni di modifica formato"),+ ("Style Options", "Opzioni stile"),+ ("[Any Style]", "[Qualsiasi stile]"),+ ("Specify attributes to change", "Specifica gli attributi da modificare"),+ ("Clear specified attributes", "Cancella gli attributi specificati"),+ (+ "With a Change Format and nothing in Change to, the found text stays and is only formatted",+ "Con un formato di modifica e «Sostituisci con» vuoto, il testo trovato resta e cambia solo la formattazione",+ ),+ ("Double Column", "Colonna doppia"),+ ("Tools Panel:", "Pannello Strumenti:"),+ ("Color Theme:", "Tema colore:"),+ ("At End of Document", "Alla fine del documento"),+ ("At Start of Document", "All'inizio del documento"),+ ("Before Page", "Prima della pagina"),+ ("After Page", "Dopo la pagina"),+ ("Parent:", "Pagina mastro:"),+ ("Insert:", "Inserisci:"),+ ("Insert Pages", "Inserisci pagine"),+ ("Stroke Type", "Tipo traccia"),+ ("Corner Shape", "Forma angolo"),+ ("Corner Size and Shape:", "Dimensione e forma angoli:"),+ ("Join", "Unisci"),+ ("Convert Point", "Converti punto"),+ ("New Section", "Nuova sezione"),+ ("Clear Frame Fitting Options", "Cancella opzioni di adattamento cornice"),+ ("Cannot be edited", "Non modificabile"),+ ("Maximum:", "Massimo:"),+ ("Paragraph Spacing Limit:", "Limite spaziatura paragrafo:"),("Restart Numbering", "Riavvia numerazione"),("Continue Numbering", "Continua numerazione"),("Keep Options…", "Opzioni di separazione…"),diff --cc crates/ui-egui/src/i18n/ka.rsindex a22fe780f,9c6f2e586..92b78cebc--- a/crates/ui-egui/src/i18n/ka.rs+++ b/crates/ui-egui/src/i18n/ka.rs@@@ -33,46 -32,8 +33,48 @@@ pub(super) const TABLE: &[(&str, &str)("Cut", "ამოჭრა"),("Copy", "კოპირება"),("Paste", "ჩასმა"),+ ("Keep In Frame", "ჩარჩოში შენარჩუნება"),+ ("New Paragraph Style", "აბზაცის ახალი სტილი"),+ ("New Character Style", "სიმბოლოს ახალი სტილი"),+ ("Next Style:", "შემდეგი სტილი:"),+ ("[Same style]", "[იგივე სტილი]"),+ ("Reset To Base", "საბაზოზე დაბრუნება"),+ ("Apply Style to Selection", "სტილის გამოყენება მონიშნულზე"),+ ("Change/Find", "ჩანაცვლება/ძიება"),+ ("Find Format:", "ფორმატის ძიება:"),+ ("Find Format Settings", "ფორმატის ძიების პარამეტრები"),+ ("Specify attributes to find", "საძიებო ატრიბუტების მითითება"),+ (+ "With a Find Format, only text that has it is found; with nothing in Find what, all text that has it",+ "ძიების ფორმატით მხოლოდ ის ტექსტი მოიძებნება, რომელსაც ის აქვს; ცარიელი „ძიება“ ველით — ყველა ასეთი ტექსტი",+ ),+ ("Change Format:", "ფორმატის შეცვლა:"),+ ("Change Format Settings", "ფორმატის შეცვლის პარამეტრები"),+ ("Style Options", "სტილის პარამეტრები"),+ ("[Any Style]", "[ნებისმიერი სტილი]"),+ ("Specify attributes to change", "შესაცვლელი ატრიბუტების მითითება"),+ ("Clear specified attributes", "მითითებული ატრიბუტების გასუფთავება"),+ (+ "With a Change Format and nothing in Change to, the found text stays and is only formatted",+ "ფორმატის შეცვლით და ცარიელი „ჩანაცვლება“ ველით ნაპოვნი ტექსტი რჩება და მხოლოდ ფორმატი იცვლება",+ ),+ ("Double Column", "ორმაგი სვეტი"),+ ("Tools Panel:", "ხელსაწყოების პანელი:"),+ ("Color Theme:", "ფერთა თემა:"),+ ("At End of Document", "დოკუმენტის ბოლოს"),+ ("At Start of Document", "დოკუმენტის დასაწყისში"),+ ("Before Page", "გვერდის წინ"),+ ("After Page", "გვერდის შემდეგ"),+ ("Parent:", "საბაზო გვერდი:"),+ ("Insert:", "ჩასმა:"),+ ("Stroke Type", "კონტურის ტიპი"),+ ("Corner Shape", "კუთხის ფორმა"),+ ("Corner Size and Shape:", "კუთხეების ზომა და ფორმა:"),+ ("New Section", "ახალი სექცია"),+ ("Clear Frame Fitting Options", "ჩარჩოს მორგების პარამეტრების გასუფთავება"),+ ("Cannot be edited", "რედაქტირება შეუძლებელია"),+ ("Maximum:", "მაქსიმუმი:"),+ ("Paragraph Spacing Limit:", "აბზაცებს შორის ინტერვალის ზღვარი:"),("Restart Numbering", "ნუმერაციის თავიდან დაწყება"),("Continue Numbering", "ნუმერაციის გაგრძელება"),("Keep Options…", "შენარჩუნების პარამეტრები…"),diff --cc crates/ui-egui/src/i18n/pl.rsindex de5360fbd,04a9a50fe..f419146ef--- a/crates/ui-egui/src/i18n/pl.rs+++ b/crates/ui-egui/src/i18n/pl.rs@@@ -31,52 -30,8 +31,54 @@@ pub(super) const TABLE: &[(&str, &str)("Cut", "Wytnij"),("Copy", "Kopiuj"),("Paste", "Wklej"),+ ("Keep In Frame", "Zachowaj w ramce"),+ ("Gap Tint:", "Odcień odstępu:"),+ ("New Paragraph Style", "Nowy styl akapitowy"),+ ("New Character Style", "Nowy styl znakowy"),+ ("Next Style:", "Następny styl:"),+ ("[Same style]", "[Ten sam styl]"),+ ("Reset To Base", "Przywróć bazowy"),+ ("Apply Style to Selection", "Zastosuj styl do zaznaczenia"),+ ("Change/Find", "Zmień/Znajdź"),+ ("Find Format:", "Znajdź format:"),+ ("Find Format Settings", "Ustawienia wyszukiwania formatu"),+ ("Specify attributes to find", "Określ atrybuty do znalezienia"),+ (+ "With a Find Format, only text that has it is found; with nothing in Find what, all text that has it",+ "Przy formacie wyszukiwania znajdowany jest tylko tekst, który go ma; przy pustym polu „Znajdź” — cały taki tekst",+ ),+ ("Change Format:", "Zmień format:"),+ ("Change Format Settings", "Ustawienia zmiany formatu"),+ ("Style Options", "Opcje stylu"),+ ("[Any Style]", "[Dowolny styl]"),+ ("Specify attributes to change", "Określ atrybuty do zmiany"),+ ("Clear specified attributes", "Wyczyść określone atrybuty"),+ (+ "With a Change Format and nothing in Change to, the found text stays and is only formatted",+ "Przy zmianie formatu i pustym polu „Zmień na” znaleziony tekst zostaje, a zmienia się tylko jego format",+ ),+ ("Double Column", "Podwójna kolumna"),+ ("Single Column", "Pojedyncza kolumna"),+ ("Tools Panel:", "Panel narzędzi:"),+ ("Color Theme:", "Motyw kolorów:"),+ ("At End of Document", "Na końcu dokumentu"),+ ("At Start of Document", "Na początku dokumentu"),+ ("Before Page", "Przed stroną"),+ ("After Page", "Po stronie"),+ ("Parent:", "Strona wzorcowa:"),+ ("Insert:", "Wstaw:"),+ ("Stroke Type", "Rodzaj obrysu"),+ ("Corner Shape", "Kształt narożnika"),+ ("Corner Size and Shape:", "Rozmiar i kształt narożników:"),+ ("Join", "Połącz"),+ ("Convert Point", "Konwertuj punkt"),+ ("Plain", "Zwykły"),+ ("Symmetrical", "Symetryczny"),+ ("New Section", "Nowa sekcja"),+ ("Clear Frame Fitting Options", "Wyczyść opcje dopasowania ramki"),+ ("Cannot be edited", "Nie można edytować"),+ ("Maximum:", "Maksimum:"),+ ("Paragraph Spacing Limit:", "Limit odstępu akapitów:"),("Restart Numbering", "Zacznij numerowanie od nowa"),("Continue Numbering", "Kontynuuj numerowanie"),("Keep Options…", "Opcje utrzymywania…"),diff --cc crates/ui-egui/src/i18n/pt_br.rsindex ac0c1dd43,6477d5cbf..6abb2519f--- a/crates/ui-egui/src/i18n/pt_br.rs+++ b/crates/ui-egui/src/i18n/pt_br.rs@@@ -33,49 -32,8 +33,51 @@@ pub(super) const TABLE: &[(&str, &str)("Cut", "Recortar"),("Copy", "Copiar"),("Paste", "Colar"),+ ("Keep In Frame", "Manter no quadro"),+ ("New Paragraph Style", "Novo estilo de parágrafo"),+ ("New Character Style", "Novo estilo de caractere"),+ ("Next Style:", "Próximo estilo:"),+ ("[Same style]", "[Mesmo estilo]"),+ ("Reset To Base", "Redefinir para base"),+ ("Apply Style to Selection", "Aplicar estilo à seleção"),+ ("Change/Find", "Alterar/Localizar"),+ ("Find Format:", "Localizar formato:"),+ ("Find Format Settings", "Configurações de localização de formato"),+ ("Specify attributes to find", "Especificar atributos a localizar"),+ (+ "With a Find Format, only text that has it is found; with nothing in Find what, all text that has it",+ "Com um formato de localização, só o texto que o tem é encontrado; com “Localizar” vazio, todo o texto que o tem",+ ),+ ("Change Format:", "Alterar formato:"),+ ("Change Format Settings", "Configurações de alteração de formato"),+ ("Style Options", "Opções de estilo"),+ ("[Any Style]", "[Qualquer estilo]"),+ ("Specify attributes to change", "Especificar atributos a alterar"),+ ("Clear specified attributes", "Limpar atributos especificados"),+ (+ "With a Change Format and nothing in Change to, the found text stays and is only formatted",+ "Com um formato de alteração e “Alterar para” vazio, o texto encontrado permanece e só a formatação muda",+ ),+ ("Double Column", "Coluna dupla"),+ ("Tools Panel:", "Painel Ferramentas:"),+ ("Color Theme:", "Tema de cores:"),+ ("At End of Document", "No final do documento"),+ ("At Start of Document", "No início do documento"),+ ("Before Page", "Antes da página"),+ ("After Page", "Após a página"),+ ("Parent:", "Página principal:"),+ ("Insert:", "Inserir:"),+ ("Insert Pages", "Inserir páginas"),+ ("Stroke Type", "Tipo de traçado"),+ ("Corner Shape", "Forma do canto"),+ ("Corner Size and Shape:", "Tamanho e forma dos cantos:"),+ ("Join", "Unir"),+ ("Convert Point", "Converter ponto"),+ ("New Section", "Nova seção"),+ ("Clear Frame Fitting Options", "Limpar opções de ajuste do quadro"),+ ("Cannot be edited", "Não editável"),+ ("Maximum:", "Máximo:"),+ ("Paragraph Spacing Limit:", "Limite de espaçamento de parágrafo:"),("Restart Numbering", "Reiniciar numeração"),("Continue Numbering", "Continuar numeração"),("Keep Options…", "Opções de manutenção…"),diff --cc crates/ui-egui/src/i18n/ru.rsindex c87d33f25,fdb9f295f..4f84ce9d4--- a/crates/ui-egui/src/i18n/ru.rs+++ b/crates/ui-egui/src/i18n/ru.rs@@@ -35,52 -34,8 +35,54 @@@ pub(super) const TABLE: &[(&str, &str)("Cut", "Вырезать"),("Copy", "Копировать"),("Paste", "Вставить"),+ ("Keep In Frame", "Сохранить во фрейме"),+ ("Gap Tint:", "Оттенок пробелов:"),+ ("New Paragraph Style", "Новый стиль абзаца"),+ ("New Character Style", "Новый стиль символов"),+ ("Next Style:", "Следующий стиль:"),+ ("[Same style]", "[Тот же стиль]"),+ ("Reset To Base", "Сбросить до основы"),+ ("Apply Style to Selection", "Применить стиль к выделенному"),+ ("Change/Find", "Заменить/Найти"),+ ("Find Format:", "Найти формат:"),+ ("Find Format Settings", "Параметры поиска формата"),+ ("Specify attributes to find", "Задать атрибуты для поиска"),+ (+ "With a Find Format, only text that has it is found; with nothing in Find what, all text that has it",+ "С форматом поиска находится только текст с этим форматом; если поле «Найти» пусто — весь такой текст",+ ),+ ("Change Format:", "Заменить формат:"),+ ("Change Format Settings", "Параметры замены формата"),+ ("Style Options", "Параметры стиля"),+ ("[Any Style]", "[Любой стиль]"),+ ("Specify attributes to change", "Задать атрибуты для замены"),+ ("Clear specified attributes", "Очистить заданные атрибуты"),+ (+ "With a Change Format and nothing in Change to, the found text stays and is only formatted",+ "Если задан формат замены, а поле «Заменить на» пусто, найденный текст остаётся, меняется только его формат",+ ),+ ("Double Column", "Две колонки"),+ ("Single Column", "Одна колонка"),+ ("Tools Panel:", "Панель инструментов:"),+ ("Color Theme:", "Цветовая тема:"),+ ("At End of Document", "В конец документа"),+ ("At Start of Document", "В начало документа"),+ ("Before Page", "Перед страницей"),+ ("After Page", "После страницы"),+ ("Parent:", "Шаблон:"),+ ("Insert:", "Вставить:"),+ ("Stroke Type", "Тип обводки"),+ ("Corner Shape", "Форма угла"),+ ("Corner Size and Shape:", "Размер и форма углов:"),+ ("Join", "Соединить"),+ ("Convert Point", "Преобразовать точку"),+ ("Plain", "Простая"),+ ("Symmetrical", "Симметричная"),+ ("New Section", "Новый раздел"),+ ("Clear Frame Fitting Options", "Очистить параметры подгонки фрейма"),+ ("Cannot be edited", "Нельзя изменить"),+ ("Maximum:", "Максимум:"),+ ("Paragraph Spacing Limit:", "Предел интервала абзацев:"),("Restart Numbering", "Начать нумерацию заново"),("Continue Numbering", "Продолжить нумерацию"),("Keep Options…", "Параметры удержания…"),diff --cc crates/ui-egui/src/i18n/table.rsindex c879a2424,83bd6ff54..9890c0172--- a/crates/ui-egui/src/i18n/table.rs+++ b/crates/ui-egui/src/i18n/table.rs@@@ -1,29 -1,14 +1,38 @@@/// English → [German, French, Spanish, Japanese, Simplified Chinese].pub(super) const TABLE: &[(&str, [&str; 5])] = &[+ ("Keep In Frame", ["Im Rahmen behalten", "Conserver dans le bloc", "Mantener en el marco", "フレーム内に保持", "保持在框架内"]),+ ("Next Style:", ["Nächstes Format:", "Style suivant :", "Estilo siguiente:", "次のスタイル :", "下一样式:"]),+ ("[Same style]", ["[Gleiches Format]", "[Même style]", "[Mismo estilo]", "[同じスタイル]", "[相同样式]"]),+ ("Reset To Base", ["Auf Basis zurücksetzen", "Rétablir la base", "Restablecer a base", "基準に戻す", "重置为基准"]),+ ("New Paragraph Style", ["Neues Absatzformat", "Nouveau style de paragraphe", "Nuevo estilo de párrafo", "新規段落スタイル", "新建段落样式"]),+ ("New Character Style", ["Neues Zeichenformat", "Nouveau style de caractère", "Nuevo estilo de carácter", "新規文字スタイル", "新建字符样式"]),+ (+ "Apply Style to Selection",+ [+ "Format auf Auswahl anwenden",+ "Appliquer le style à la sélection",+ "Aplicar estilo a la selección",+ "選択範囲にスタイルを適用",+ "将样式应用于选区",+ ],+ ),+ (+ "Clear Frame Fitting Options",+ [+ "Rahmeneinpassungsoptionen löschen",+ "Effacer les options d’ajustement du bloc",+ "Borrar opciones de encaje de marco",+ "フレーム調整オプションを消去",+ "清除框架适合选项",+ ("Maximum:", ["Maximum:", "Maximum :", "Máximo:", "最大 :", "最大值:"]),+ (+ "Paragraph Spacing Limit:",+ [+ "Abstandsgrenze für Absätze:",+ "Limite d'espacement des paragraphes :",+ "Límite de espaciado de párrafo:",+ "段落スペース最大値 :",+ "段落间距限制:",],),(diff --cc crates/ui-egui/src/i18n/uk.rsindex 8706ec6be,0b9eec221..edab01623--- a/crates/ui-egui/src/i18n/uk.rs+++ b/crates/ui-egui/src/i18n/uk.rs@@@ -31,49 -30,8 +31,51 @@@ pub(super) const TABLE: &[(&str, &str)("Cut", "Вирізати"),("Copy", "Копіювати"),("Paste", "Вставити"),+ ("Keep In Frame", "Зберегти у фреймі"),+ ("New Paragraph Style", "Новий стиль абзацу"),+ ("New Character Style", "Новий стиль символів"),+ ("Next Style:", "Наступний стиль:"),+ ("[Same style]", "[Той самий стиль]"),+ ("Reset To Base", "Скинути до основи"),+ ("Apply Style to Selection", "Застосувати стиль до виділеного"),+ ("Change/Find", "Замінити/Знайти"),+ ("Find Format:", "Знайти формат:"),+ ("Find Format Settings", "Параметри пошуку формату"),+ ("Specify attributes to find", "Задати атрибути для пошуку"),+ (+ "With a Find Format, only text that has it is found; with nothing in Find what, all text that has it",+ "З форматом пошуку знаходиться лише текст із цим форматом; якщо поле «Знайти» порожнє — увесь такий текст",+ ),+ ("Change Format:", "Замінити формат:"),+ ("Change Format Settings", "Параметри заміни формату"),+ ("Style Options", "Параметри стилю"),+ ("[Any Style]", "[Будь-який стиль]"),+ ("Specify attributes to change", "Задати атрибути для заміни"),+ ("Clear specified attributes", "Очистити задані атрибути"),+ (+ "With a Change Format and nothing in Change to, the found text stays and is only formatted",+ "Якщо задано формат заміни, а поле «Замінити на» порожнє, знайдений текст лишається, змінюється лише його формат",+ ),+ ("Double Column", "Подвійна колонка"),+ ("Tools Panel:", "Панель інструментів:"),+ ("Color Theme:", "Колірна тема:"),+ ("At End of Document", "У кінець документа"),+ ("At Start of Document", "На початок документа"),+ ("Before Page", "Перед сторінкою"),+ ("After Page", "Після сторінки"),+ ("Parent:", "Шаблон:"),+ ("Insert:", "Вставити:"),+ ("Insert Pages", "Вставити сторінки"),+ ("Stroke Type", "Тип обведення"),+ ("Corner Shape", "Форма кута"),+ ("Corner Size and Shape:", "Розмір і форма кутів:"),+ ("Join", "Зʼєднати"),+ ("Convert Point", "Перетворити точку"),+ ("New Section", "Новий розділ"),+ ("Clear Frame Fitting Options", "Очистити параметри припасування фрейму"),+ ("Cannot be edited", "Не можна змінити"),+ ("Maximum:", "Максимум:"),+ ("Paragraph Spacing Limit:", "Межа інтервалу абзаців:"),("Restart Numbering", "Почати нумерацію знову"),("Continue Numbering", "Продовжити нумерацію"),("Keep Options…", "Параметри утримання…"),diff --cc docs/target-app-parity.mdindex 3506695d4,cf43f7413..b56fd7a34--- a/docs/target-app-parity.md+++ b/docs/target-app-parity.md@@@ -1,6 -1,6 +1,6 @@@# DesignCraft parity with Adobe InDesign- > **Last reviewed:** 2026-10-10 · **Last updated:** 2026-10-24 · **Change:** minor (Swatches rows show InDesign's type columns; Keyboard Shortcuts on craft-keymap's shared dialog, with shortcut sets; Convert Variable to Text; list buttons with the default hanging indent; custom anchored objects honour Relative to Spine; PDF/X-4 visible unembedded font detection, #909; autoflow fills the following pages first; File ▸ Open Recent; .indd and .indt open through indd-utils; text threads by hand; image clipping paths from IDML; anchored objects wrap text; Tabs panel listed as present (#343); spring-loaded Zoom navigation; recovery checkpoint retention; cancelable macOS Dock Quit; Based on Parent; object styles carry effects; colour management on craft-cms, Coated FOGRA39 default CMYK; swatches on placed greyscale and bitmap images) · **Target:** Adobe InDesign 2026 (21.6.0.57, macOS)-> **Last reviewed:** 2026-10-10 · **Last updated:** 2026-10-24 · **Change:** minor (Text Frame Options layout, Preview and Paragraph Spacing Limit; Keyboard Shortcuts on craft-keymap's shared dialog, with shortcut sets; Convert Variable to Text; list buttons with the default hanging indent; custom anchored objects honour Relative to Spine; PDF/X-4 visible unembedded font detection, #909; autoflow fills the following pages first; File ▸ Open Recent; .indd and .indt open through indd-utils; text threads by hand; image clipping paths from IDML; anchored objects wrap text; Tabs panel listed as present (#343); spring-loaded Zoom navigation; recovery checkpoint retention; cancelable macOS Dock Quit; Based on Parent; object styles carry effects; colour management on craft-cms, Coated FOGRA39 default CMYK; swatches on placed greyscale and bitmap images) · **Target:** Adobe InDesign 2026 (21.6.0.57, macOS)++> **Last reviewed:** 2026-10-10 · **Last updated:** 2026-10-24 · **Change:** minor (Text Frame Options layout, Preview and Paragraph Spacing Limit; Swatches rows show InDesign's type columns; Keyboard Shortcuts on craft-keymap's shared dialog, with shortcut sets; Convert Variable to Text; list buttons with the default hanging indent; custom anchored objects honour Relative to Spine; PDF/X-4 visible unembedded font detection, #909; autoflow fills the following pages first; File ▸ Open Recent; .indd and .indt open through indd-utils; text threads by hand; image clipping paths from IDML; anchored objects wrap text; Tabs panel listed as present (#343); spring-loaded Zoom navigation; recovery checkpoint retention; cancelable macOS Dock Quit; Based on Parent; object styles carry effects; colour management on craft-cms, Coated FOGRA39 default CMYK; swatches on placed greyscale and bitmap images) · **Target:** Adobe InDesign 2026 (21.6.0.57, macOS)The authoritative assessment of how close DesignCraft is to Adobe InDesign. [ROADMAP.md](../ROADMAP.md)summarizes it; [gaps.md](gaps.md) lists every known shortfall one at a time; the feature-by-feature