Making an ESP32-based quadcopter from scratch
Python arduinoautopilotcontrol-theorydroneesp32flight-controlflight-controllermavlinkquadcopterquadcopter-firmwareuav
Add Wi-Fi password to build tutorial
Oleg Kalachev117ae42d1baa
diff --git a/docs/build.md b/docs/build.mdindex 4d49aaa..206734b 100644--- a/docs/build.md+++ b/docs/build.md@@ -160,7 +160,7 @@ Before flight you need to calibrate the accelerometer:1. Install [QGroundControl mobile app](https://docs.qgroundcontrol.com/master/en/qgc-user-guide/getting_started/download_and_install.html#android) on your smartphone.2. Power the drone using the battery.-3. Connect your smartphone to the appeared `flix` Wi-Fi network.+3. Connect your smartphone to the appeared `flix` Wi-Fi network (password: `flixwifi`).4. Open QGroundControl app. It should connect and begin showing the drone's telemetry automatically.5. Go to the settings and enable *Virtual Joystick*. *Auto-Center Throttle* setting **should be disabled**.6. Use the virtual joystick to fly the drone!@@ -180,7 +180,7 @@ If your drone doesn't have RC receiver installed, you can use USB remote control1. Install [QGroundControl](https://docs.qgroundcontrol.com/master/en/qgc-user-guide/getting_started/download_and_install.html) app on your computer.2. Connect your USB remote control to the computer.3. Power up the drone.-4. Connect your computer to the appeared `flix` Wi-Fi network.+4. Connect your computer to the appeared `flix` Wi-Fi network (password: `flixwifi`).5. Launch QGroundControl app. It should connect and begin showing the drone's telemetry automatically.6. Go the the QGroundControl menu ⇒ *Vehicle Setup* ⇒ *Joystick*. Calibrate you USB remote control there.7. Use the USB remote control to fly the drone!