Making an ESP32-based quadcopter from scratch
Python arduinoautopilotcontrol-theorydroneesp32flight-controlflight-controllermavlinkquadcopterquadcopter-firmwareuav
Minor troubleshooting article fix
Oleg Kalachev41cde3261a5e
diff --git a/docs/troubleshooting.md b/docs/troubleshooting.mdindex 60e251c..7b493fd 100644--- a/docs/troubleshooting.md+++ b/docs/troubleshooting.md@@ -27,7 +27,7 @@ Do the following:* `mfl` — should rotate front left motor (clockwise).* `mrl` — should rotate rear left motor (counter-clockwise).* `mrr` — should rotate rear right motor (clockwise).-* **Calibrate the RC** if you use it. Perform `rc` command and put the results to `rc.ino` file.+* **Calibrate the RC** if you use it. Perform `cr` command and put the results to `rc.ino` file.* **Check the RC data** if you use it. Use `rc` command, `Control` should show correct values between -1 and 1, and between 0 and 1 for the throttle.* **Check the IMU output using QGroundControl**. Connect to the drone using QGroundControl on your computer. Go to the *Analyze* tab, *MAVLINK Inspector*. Plot the data from the `SCALED_IMU` message. The gyroscope and accelerometer data should change according to the drone movement.* **Check the gyroscope only attitude estimation**. Comment out `applyAcc();` line in `estimate.ino` and check if the attitude estimation in QGroundControl. It should be stable, but only drift very slowly.