Making an ESP32-based quadcopter from scratch
Python arduinoautopilotcontrol-theorydroneesp32flight-controlflight-controllermavlinkquadcopterquadcopter-firmwareuav
Set the debug level to error by default to see the errors
Oleg Kalachev488ceb3004ce
diff --git a/Makefile b/Makefileindex de670c4..68771b5 100644--- a/Makefile+++ b/Makefile@@ -1,4 +1,4 @@-BOARD = esp32:esp32:d1_mini32+BOARD = esp32:esp32:d1_mini32:DebugLevel=errorPORT := $(strip $(wildcard /dev/serial/by-id/usb-Silicon_Labs_CP21* /dev/serial/by-id/usb-1a86_USB_Single_Serial_* /dev/cu.usbserial-* /dev/cu.usbmodem*))build: .dependenciesdiff --git a/docs/usage.md b/docs/usage.mdindex 16123c8..6091668 100644--- a/docs/usage.md+++ b/docs/usage.md@@ -26,7 +26,8 @@ You can build and upload the firmware using either **Arduino IDE** (easier for b* `MAVLink`, version 2.0.25.5. Open the `flix/flix.ino` sketch from downloaded firmware sources in Arduino IDE.6. Connect your ESP32 board to the computer and choose correct board type in Arduino IDE (*WEMOS D1 MINI ESP32* for ESP32 Mini) and the port.-7. [Build and upload](https://docs.arduino.cc/software/ide-v2/tutorials/getting-started/ide-v2-uploading-a-sketch) the firmware using Arduino IDE.+7. Set *Tools* ⇒ *Core Debug Level* to *Error* to see the errors in the serial console. Set *Tools* ⇒ *USB CDC on Boot* to *Enabled* for ESP32-S3/ESP32-C3 boards.+8. [Build and upload](https://docs.arduino.cc/software/ide-v2/tutorials/getting-started/ide-v2-uploading-a-sketch) the firmware using Arduino IDE.### Command line (Windows, Linux, macOS)@@ -57,6 +58,12 @@ You can build and upload the firmware using either **Arduino IDE** (easier for bmake upload monitor```+ For ESP32-S3/ESP32-C3 boards, set the appropriate [FQBN](https://arduino.github.io/arduino-cli/1.5/FAQ/#whats-the-fqbn-string) using `BOARD` parameter:++ ```bash+ make BOARD=esp32:esp32:esp32s3:DebugLevel=error,FlashSize=4M,CDCOnBoot=cdc upload+ ```+See other available Make commands in [Makefile](../Makefile).> [!TIP]