Making an ESP32-based quadcopter from scratch
Python arduinoautopilotcontrol-theorydroneesp32flight-controlflight-controllermavlinkquadcopterquadcopter-firmwareuav
Remove unneeded advice from troubleshooting
Oleg Kalachev6e6a71fa691c
diff --git a/docs/troubleshooting.md b/docs/troubleshooting.mdindex 85c0e7c..cc6d4c1 100644--- a/docs/troubleshooting.md+++ b/docs/troubleshooting.md@@ -35,4 +35,3 @@ Do the following:* **Calibrate the RC** if you use it. Type `cr` command in Serial Monitor and follow the instructions.* **Check the RC data** if you use it. Use `rc` command, `Control` should show correct values between -1 and 1, and between 0 and 1 for the throttle.* **Check the IMU output using QGroundControl**. Connect to the drone using QGroundControl on your computer. Go to the *Analyze* tab, *MAVLINK Inspector*. Plot the data from the `SCALED_IMU` message. The gyroscope and accelerometer data should change according to the drone movement.-* **Check the gyroscope only attitude estimation**. Comment out `applyAcc();` line in `estimate.ino` and check if the attitude estimation in QGroundControl. It should be stable, but only drift very slowly.