Making an ESP32-based quadcopter from scratch
Python arduinoautopilotcontrol-theorydroneesp32flight-controlflight-controllermavlinkquadcopterquadcopter-firmwareuav
Minor docs fix
Oleg Kalachev708c8f04dc24
diff --git a/docs/usage.md b/docs/usage.mdindex c49a6f2..7a2bb3e 100644--- a/docs/usage.md+++ b/docs/usage.md@@ -215,22 +215,22 @@ When finished flying, **disarm** the drone, moving the left stick to the bottomFlight mode is changed using mode switch on the remote control or using the command line.-### STAB+#### STABThe default mode is *STAB*. In this mode, the drone stabilizes its attitude (orientation). The left stick controls throttle and yaw rate, the right stick controls pitch and roll angles.> [!IMPORTANT]> The drone doesn't stabilize its position, so slight drift is possible. The pilot should compensate it manually.-### ACRO+#### ACROIn this mode, the pilot controls the angular rates. This control method is difficult to fly and mostly used in FPV racing.-### MANUAL+#### MANUALManual mode disables all the stabilization, and the pilot inputs are passed directly to the motors. This mode is intended for testing and demonstration purposes only, and basically the drone **cannot fly in this mode**.-### AUTO+#### AUTOIn this mode, the pilot inputs are ignored (except the mode switch, if configured). The drone can be controlled using [pyflix](../tools/pyflix/) Python library, or by modifying the firmware to implement the needed autonomous behavior.