Making an ESP32-based quadcopter from scratch
Python arduinoautopilotcontrol-theorydroneesp32flight-controlflight-controllermavlinkquadcopterquadcopter-firmwareuav
Exit auto mode when sticks moved only when mode switch is not configured
Oleg Kalachev9ca68415589a
diff --git a/docs/usage.md b/docs/usage.mdindex 974f851..18493e8 100644--- a/docs/usage.md+++ b/docs/usage.md@@ -266,7 +266,7 @@ In this mode, the pilot controls the angular rates. This control method is diffiIn this mode, the pilot inputs are ignored (except the mode switch). The drone can be controlled using [pyflix](../tools/pyflix/) Python library, or by modifying the firmware to implement the needed behavior.-If the pilot moves the control sticks, the drone will switch back to *STAB* mode.+If the pilot moves the control sticks and mode switch is not configured, the drone will switch back to *STAB* mode.## Wi-Fi configurationdiff --git a/flix/safety.ino b/flix/safety.inoindex 1d67010..05fd758 100644--- a/flix/safety.ino+++ b/flix/safety.ino@@ -37,8 +37,8 @@ void descend() {void autoFailsafe() {static float roll, pitch, yaw, throttle;if (roll != controlRoll || pitch != controlPitch || yaw != controlYaw || abs(throttle - controlThrottle) > 0.05) {- // controls changed- if (mode == AUTO) mode = STAB; // regain control by the pilot+ // controls changed and mode switch is not configured+ if (mode == AUTO && invalid(controlMode)) mode = STAB; // regain control by the pilot}roll = controlRoll;pitch = controlPitch;