Making an ESP32-based quadcopter from scratch
Python arduinoautopilotcontrol-theorydroneesp32flight-controlflight-controllermavlinkquadcopterquadcopter-firmwareuav
Add instructions on using USB remote control via QGroundControl app
Oleg Kalachevb915e47f3332
diff --git a/docs/build.md b/docs/build.mdindex 51e297e..47583e6 100644--- a/docs/build.md+++ b/docs/build.md@@ -161,8 +161,19 @@ Before flight using remote control, you need to calibrate it:1. Open Serial Monitor in Arduino IDE (use use `make monitor` command in the command line).2. Type `cr` command there and follow the instructions.+3. Use the remote control to fly the drone!-Then you can use your remote control to fly the drone!+#### Control with USB remote control++If your drone doesn't have RC receiver installed, you can use USB remote control and QGroundControl app to fly it.++1. Install [QGroundControl](https://docs.qgroundcontrol.com/master/en/qgc-user-guide/getting_started/download_and_install.html) app on your computer.+2. Connect your USB remote control to the computer.+3. Power up the drone.+4. Connect your computer to the appeared `flix` Wi-Fi network.+5. Launch QGroundControl app. It should connect and begin showing the drone's telemetry automatically.+6. Go the the QGroundControl menu ⇒ *Vehicle Setup* ⇒ *Joystick*. Calibrate you USB remote control there.+7. Use the USB remote control to fly the drone!> [!NOTE]> If something goes wrong, go to the [Troubleshooting](troubleshooting.md) article.