Making an ESP32-based quadcopter from scratch
Python arduinoautopilotcontrol-theorydroneesp32flight-controlflight-controllermavlinkquadcopterquadcopter-firmwareuav
Minor README fixes
Oleg Kalachevbaf724ed6e24
diff --git a/README.md b/README.mdindex 853cf37..f138cb0 100644--- a/README.md+++ b/README.md@@ -70,8 +70,7 @@ See [instructions on running the simulation](docs/build.md).|Wires|28 AWG recommended|<img src="docs/img/wire-28awg.jpg" width=100>|||Tape, double-sided tape||||-*² — barometer is not used for now.*-+*² — barometer is not used for now.*<br>*³ — you may use any transmitter-receiver pair with SBUS interface.*Tools required for assembly:@@ -128,9 +127,9 @@ Complete diagram is Work-in-Progress.|-|-||GND|GND||VIN|VC (or 3.3V depending on the receiver)|- |Signal|GPIO4 ⁴|+ |Signal|GPIO4⁴|-*⁴ – UART2 RX pin was [changed](https://docs.espressif.com/projects/arduino-esp32/en/latest/migration_guides/2.x_to_3.0.html#id14) to GPIO4 in Arduino ESP32 core 3.0.*+*⁴ — UART2 RX pin was [changed](https://docs.espressif.com/projects/arduino-esp32/en/latest/migration_guides/2.x_to_3.0.html#id14) to GPIO4 in Arduino ESP32 core 3.0.*## Version 0