Making an ESP32-based quadcopter from scratch
Python arduinoautopilotcontrol-theorydroneesp32flight-controlflight-controllermavlinkquadcopterquadcopter-firmwareuav
Some readme change regarding using different IMU board
Oleg Kalachevc75760e9e61d
diff --git a/README.md b/README.mdindex 64b4cd9..f30d670 100644--- a/README.md+++ b/README.md@@ -62,17 +62,18 @@ See [instructions on running the simulation](docs/build.md).|Li-Po Battery charger|Any|<img src="docs/img/charger.jpg" width=100>|1||Screws for IMU board mounting|M3x5|<img src="docs/img/screw-m3.jpg" width=100>|2||Screws for frame assembly|M1.4x5|<img src="docs/img/screw-m1.4.jpg" height=30 align=center>|4|-|Frame bottom part|3D printed:<br>[`flix-frame.stl`](docs/assets/flix-frame.stl) [`flix-frame.step`](docs/assets/flix-frame.step)|<img src="docs/img/frame1.jpg" width=100>|1|+|Frame bottom part|3D printed⁴:<br>[`flix-frame.stl`](docs/assets/flix-frame.stl) [`flix-frame.step`](docs/assets/flix-frame.step)|<img src="docs/img/frame1.jpg" width=100>|1||Frame top part|3D printed:<br>[`esp32-holder.stl`](docs/assets/esp32-holder.stl) [`esp32-holder.step`](docs/assets/esp32-holder.step)|<img src="docs/img/esp32-holder.jpg" width=100>|1||Washer for IMU board mounting|3D printed:<br>[`washer-m3.stl`](docs/assets/washer-m3.stl) [`washer-m3.step`](docs/assets/washer-m3.step)|<img src="docs/img/washer-m3.jpg" width=100>|1|-|*RC transmitter (optional)*|*KINGKONG TINY X8 or other⁴*|<img src="docs/img/tx.jpg" width=100>|1|-|*RC receiver (optional)*|*DF500 or other⁴*|<img src="docs/img/rx.jpg" width=100>|1|+|*RC transmitter (optional)*|*KINGKONG TINY X8 or other⁵*|<img src="docs/img/tx.jpg" width=100>|1|+|*RC receiver (optional)*|*DF500 or other⁵*|<img src="docs/img/rx.jpg" width=100>|1||Wires|28 AWG recommended|<img src="docs/img/wire-28awg.jpg" width=100>|||Tape, double-sided tape||||*² — barometer is not used for now.*<br>*³ — change `MPU9250` to `ICM20948` in `imu.ino` file if using ICM-20948 board.*<br>-*⁴ — you may use any transmitter-receiver pair with SBUS interface.*+*⁴ — this frame is optimized for GY-91 board, if using other, the board mount holes positions should be modified.*<br>+*⁵ — you may use any transmitter-receiver pair with SBUS interface.*Tools required for assembly:@@ -99,9 +100,9 @@ Complete diagram is Work-in-Progress.### Notes* Power ESP32 Mini with Li-Po battery using VCC (+) and GND (-) pins.-* Connect the GY-91 board to the ESP32 Mini using VSPI, power it using 3.3V and GND pins:+* Connect the IMU board to the ESP32 Mini using VSPI, power it using 3.3V and GND pins:- |GY-91 pin|ESP32 pin|+ |IMU pin|ESP32 pin||-|-||GND|GND||3.3V|3.3V|@@ -128,19 +129,19 @@ Complete diagram is Work-in-Progress.|-|-||GND|GND||VIN|VC (or 3.3V depending on the receiver)|- |Signal|GPIO4⁵|+ |Signal|GPIO4⁶|-*⁵ — UART2 RX pin was [changed](https://docs.espressif.com/projects/arduino-esp32/en/latest/migration_guides/2.x_to_3.0.html#id14) to GPIO4 in Arduino ESP32 core 3.0.*+*⁶ — UART2 RX pin was [changed](https://docs.espressif.com/projects/arduino-esp32/en/latest/migration_guides/2.x_to_3.0.html#id14) to GPIO4 in Arduino ESP32 core 3.0.*### IMU placement-Required IMU orientation on the drone is **FLU** (Forward, Left, Up)⁶:+Required IMU orientation on the drone is **FLU** (Forward, Left, Up)⁷:<img src="docs/img/flu.svg" width=400 alt="GY-91 axis">In case of using **FRD** orientation (Forward, Right, Down), use [the code for rotation](https://gist.github.com/okalachev/713db47e31bce643dbbc9539d166ce98).-*⁶ — This X/Y/Z IMU axis orientation is used in the Flix IMU library, internal accel/gyro/mag axes differ.*+*⁷ — This X/Y/Z IMU axis orientation is used in the Flix IMU library, internal accel/gyro/mag axes differ.*## Version 0