Making an ESP32-based quadcopter from scratch
Python arduinoautopilotcontrol-theorydroneesp32flight-controlflight-controllermavlinkquadcopterquadcopter-firmwareuav
Minor fix in troubleshooting article
Oleg Kalacheveea1a6a83c0c
diff --git a/docs/troubleshooting.md b/docs/troubleshooting.mdindex e39daf3..106bcd5 100644--- a/docs/troubleshooting.md+++ b/docs/troubleshooting.md@@ -21,7 +21,7 @@ Do the following:* **Check the IMU data**. Perform `imu` command, check raw accelerometer and gyro output. The output should change as you move the drone.* **Calibrate the accelerometer.** if is wasn't done before. Perform `ca` command and put the results to `imu.ino` file.* **Check the attitude estimation**. Connect to the drone using QGroundControl. Rotate the drone in different orientations and check if the attitude estimation shown in QGroundControl is correct.-* * **Check the motors**. Perform the following commands using Serial Monitor:+* **Check the motors**. Perform the following commands using Serial Monitor:* `mfr` — should rotate front right motor (counter-clockwise).* `mfl` — should rotate front left motor (clockwise).* `mrl` — should rotate rear left motor (counter-clockwise).