Making an ESP32-based quadcopter from scratch
Python arduinoautopilotcontrol-theorydroneesp32flight-controlflight-controllermavlinkquadcopterquadcopter-firmwareuav
Remove reboot requirement when changing RC_RX_PIN
Oleg Kalachevf8a9f1f83835
diff --git a/docs/usage.md b/docs/usage.mdindex e610bde..631ac82 100644--- a/docs/usage.md+++ b/docs/usage.md@@ -220,7 +220,7 @@ Before using SBUS-connected remote control you need to enable SBUS and calibrate1. Connect to the drone using QGroundControl.2. In parameters, set the `RC_RX_PIN` parameter to the GPIO pin number where the SBUS signal is connected, for example: 4. Negative value disables SBUS.-3. Reboot the drone to apply changes.+3. Check if the receiver is working using `rc` command in the console.4. Open the console, type `cr` command and follow the instructions to calibrate the remote control.5. Use the remote control to fly the drone!diff --git a/flix/parameters.ino b/flix/parameters.inoindex 54e466a..75d0288 100644--- a/flix/parameters.ino+++ b/flix/parameters.ino@@ -86,7 +86,7 @@ Parameter parameters[] = {{"MOT_PWM_MIN", &pwmMin},{"MOT_PWM_MAX", &pwmMax},// rc- {"RC_RX_PIN", &rcRxPin},+ {"RC_RX_PIN", &rcRxPin, setupRC},{"RC_ZERO_0", &channelZero[0]},{"RC_ZERO_1", &channelZero[1]},{"RC_ZERO_2", &channelZero[2]},diff --git a/gazebo/flix.h b/gazebo/flix.hindex 53163e5..83a956f 100644--- a/gazebo/flix.h+++ b/gazebo/flix.h@@ -43,6 +43,7 @@ void print(const char* format, ...);void pause(float duration);void doCommand(String str, bool echo);void handleInput();+void setupRC();void normalizeRC();void calibrateRC();void calibrateRCChannel(int*, uint16_t[16], uint16_t[16], const char*);