Skip to content

Free Motion Capture for Everyone πŸ’€βœ¨

TypeScript

unit test geometry utilities

philipqueen1657fdb557da
diff --git a/freemocap/tests/test_utilities.py b/freemocap/tests/test_utilities.py
new file mode 100644
index 00000000..bf27c695
--- /dev/null
+++ b/freemocap/tests/test_utilities.py
@@ -0,0 +1,62 @@
+import numpy as np
+import pytest
+
+from freemocap.utilities.geometry.project_3d_data_to_z_plane import project_3d_data_to_z_plane
+from freemocap.utilities.geometry.rotate_by_90_degrees_around_x_axis import rotate_by_90_degrees_around_x_axis
+
+def test_rotate_by_90_degrees_around_x_axis():
+ # test single point
+ raw_skel3d_frame_marker_xyz = np.array([[[1, 2, 3]]])
+ expected_result = np.array([[[1, 3, -2]]])
+ assert np.allclose(rotate_by_90_degrees_around_x_axis(raw_skel3d_frame_marker_xyz), expected_result)
+
+ # test multiple points
+ raw_skel3d_frame_marker_xyz = np.array([[[1, 2, 3], [4, 5, 6], [7, 8, 9]]])
+ expected_result = np.array([[[1, 3, -2], [4, 6, -5], [7, 9, -8]]])
+ assert np.allclose(rotate_by_90_degrees_around_x_axis(raw_skel3d_frame_marker_xyz), expected_result)
+
+ # test empty input
+ raw_skel3d_frame_marker_xyz = np.array([])
+ with pytest.raises(ValueError):
+ rotate_by_90_degrees_around_x_axis(raw_skel3d_frame_marker_xyz)
+
+ # test zero input
+ raw_skel3d_frame_marker_xyz = np.array([[[0, 0, 0], [0, 0, 0], [0, 0, 0]]])
+ expected_result = np.array([[[0, 0, 0], [0, 0, 0], [0, 0, 0]]])
+ assert np.allclose(rotate_by_90_degrees_around_x_axis(raw_skel3d_frame_marker_xyz), expected_result)
+
+def test_project_3d_data_to_z_plane():
+ # test simple case
+ input_data = np.array([[[1, 2, 3], [4, 5, 6]], [[7, 8, 9], [10, 11, 12]]])
+ expected_output = np.array([[[1, 2, 0], [4, 5, 0]], [[7, 8, 0], [10, 11, 0]]])
+ assert np.array_equal(project_3d_data_to_z_plane(input_data), expected_output)
+
+ # test more complex case
+ input_data = np.array(
+ [
+ [[7.80, 5.67, 1.72], [9.71, 9.42, 2.57]],
+ [[4.85, 4.38, 3.42], [3.26, 1.13, 1.27]],
+ [[3.70, 1.02, 8.64], [4.85, 5.10, 8.96]],
+ [[6.57, 2.48, 2.52], [5.08, 1.76, 9.34]],
+ ]
+ )
+ input_data_copy = np.array(
+ [
+ [[7.80, 5.67, 1.72], [9.71, 9.42, 2.57]],
+ [[4.85, 4.38, 3.42], [3.26, 1.13, 1.27]],
+ [[3.70, 1.02, 8.64], [4.85, 5.10, 8.96]],
+ [[6.57, 2.48, 2.52], [5.08, 1.76, 9.34]],
+ ]
+ )
+ expected_output = np.array(
+ [
+ [[7.80, 5.67, 0], [9.71, 9.42, 0]],
+ [[4.85, 4.38, 0], [3.26, 1.13, 0]],
+ [[3.70, 1.02, 0], [4.85, 5.10, 0]],
+ [[6.57, 2.48, 0], [5.08, 1.76, 0]],
+ ]
+ )
+ assert np.array_equal(project_3d_data_to_z_plane(input_data), expected_output)
+
+ # test input data was not changed
+ assert np.array_equal(input_data, input_data_copy)
\ No newline at end of file