Skip to content

armgit / haven

Public Imported from GitHub
0

Haven is for people who need a way to protect their personal spaces and possessions without compromising their own privacy, through an Android app and on-device sensors

Fixed some bugs added accelerometer sensitivity, added test before using location provider

Marco Ziccardif486a3ce8874
diff --git a/relazioni/wireless/IEEEtran.cls b/relazioni/wireless/IEEEtran.cls
new file mode 100644
index 0000000..5681714
--- /dev/null
+++ b/relazioni/wireless/IEEEtran.cls
@@ -0,0 +1,4702 @@
+%%
+%% IEEEtran.cls 2007/03/05 version V1.7a
+%%
+%%
+%% This is the official IEEE LaTeX class for authors of the Institute of
+%% Electrical and Electronics Engineers (IEEE) Transactions journals and
+%% conferences.
+%%
+%% Support sites:
+%% http://www.michaelshell.org/tex/ieeetran/
+%% http://www.ctan.org/tex-archive/macros/latex/contrib/IEEEtran/
+%% and
+%% http://www.ieee.org/
+%%
+%% Based on the original 1993 IEEEtran.cls, but with many bug fixes
+%% and enhancements (from both JVH and MDS) over the 1996/7 version.
+%%
+%%
+%% Contributors:
+%% Gerry Murray (1993), Silvano Balemi (1993),
+%% Jon Dixon (1996), Peter N"uchter (1996),
+%% Juergen von Hagen (2000), and Michael Shell (2001-2007)
+%%
+%%
+%% Copyright (c) 1993-2000 by Gerry Murray, Silvano Balemi,
+%% Jon Dixon, Peter N"uchter,
+%% Juergen von Hagen
+%% and
+%% Copyright (c) 2001-2007 by Michael Shell
+%%
+%% Current maintainer (V1.3 to V1.7): Michael Shell
+%% See:
+%% http://www.michaelshell.org/
+%% for current contact information.
+%%
+%% Special thanks to Peter Wilson (CUA) and Donald Arseneau
+%% for allowing the inclusion of the \@ifmtarg command
+%% from their ifmtarg LaTeX package.
+%%
+%%*************************************************************************
+%% Legal Notice:
+%% This code is offered as-is without any warranty either expressed or
+%% implied; without even the implied warranty of MERCHANTABILITY or
+%% FITNESS FOR A PARTICULAR PURPOSE!
+%% User assumes all risk.
+%% In no event shall IEEE or any contributor to this code be liable for
+%% any damages or losses, including, but not limited to, incidental,
+%% consequential, or any other damages, resulting from the use or misuse
+%% of any information contained here.
+%%
+%% All comments are the opinions of their respective authors and are not
+%% necessarily endorsed by the IEEE.
+%%
+%% This work is distributed under the LaTeX Project Public License (LPPL)
+%% ( http://www.latex-project.org/ ) version 1.3, and may be freely used,
+%% distributed and modified. A copy of the LPPL, version 1.3, is included
+%% in the base LaTeX documentation of all distributions of LaTeX released
+%% 2003/12/01 or later.
+%% Retain all contribution notices and credits.
+%% ** Modified files should be clearly indicated as such, including **
+%% ** renaming them and changing author support contact information. **
+%%
+%% File list of work: IEEEtran.cls, IEEEtran_HOWTO.pdf, bare_adv.tex,
+%% bare_conf.tex, bare_jrnl.tex, bare_jrnl_compsoc.tex
+%%
+%% Major changes to the user interface should be indicated by an
+%% increase in the version numbers. If a version is a beta, it will
+%% be indicated with a BETA suffix, i.e., 1.4 BETA.
+%% Small changes can be indicated by appending letters to the version
+%% such as "IEEEtran_v14a.cls".
+%% In all cases, \Providesclass, any \typeout messages to the user,
+%% \IEEEtransversionmajor and \IEEEtransversionminor must reflect the
+%% correct version information.
+%% The changes should also be documented via source comments.
+%%*************************************************************************
+%%
+%
+% Available class options
+% e.g., \documentclass[10pt,conference]{IEEEtran}
+%
+% *** choose only one from each category ***
+%
+% 9pt, 10pt, 11pt, 12pt
+% Sets normal font size. The default is 10pt.
+%
+% conference, journal, technote, peerreview, peerreviewca
+% determines format mode - conference papers, journal papers,
+% correspondence papers (technotes), or peer review papers. The user
+% should also select 9pt when using technote. peerreview is like
+% journal mode, but provides for a single-column "cover" title page for
+% anonymous peer review. The paper title (without the author names) is
+% repeated at the top of the page after the cover page. For peer review
+% papers, the \IEEEpeerreviewmaketitle command must be executed (will
+% automatically be ignored for non-peerreview modes) at the place the
+% cover page is to end, usually just after the abstract (keywords are
+% not normally used with peer review papers). peerreviewca is like
+% peerreview, but allows the author names to be entered and formatted
+% as with conference mode so that author affiliation and contact
+% information can be easily seen on the cover page.
+% The default is journal.
+%
+% draft, draftcls, draftclsnofoot, final
+% determines if paper is formatted as a widely spaced draft (for
+% handwritten editor comments) or as a properly typeset final version.
+% draftcls restricts draft mode to the class file while all other LaTeX
+% packages (i.e., \usepackage{graphicx}) will behave as final - allows
+% for a draft paper with visible figures, etc. draftclsnofoot is like
+% draftcls, but does not display the date and the word "DRAFT" at the foot
+% of the pages. If using one of the draft modes, the user will probably
+% also want to select onecolumn.
+% The default is final.
+%
+% letterpaper, a4paper
+% determines paper size: 8.5in X 11in or 210mm X 297mm. CHANGING THE PAPER
+% SIZE WILL NOT ALTER THE TYPESETTING OF THE DOCUMENT - ONLY THE MARGINS
+% WILL BE AFFECTED. In particular, documents using the a4paper option will
+% have reduced side margins (A4 is narrower than US letter) and a longer
+% bottom margin (A4 is longer than US letter). For both cases, the top
+% margins will be the same and the text will be horizontally centered.
+% For final submission to IEEE, authors should use US letter (8.5 X 11in)
+% paper. Note that authors should ensure that all post-processing
+% (ps, pdf, etc.) uses the same paper specificiation as the .tex document.
+% Problems here are by far the number one reason for incorrect margins.
+% IEEEtran will automatically set the default paper size under pdflatex
+% (without requiring a change to pdftex.cfg), so this issue is more
+% important to dvips users. Fix config.ps, config.pdf, or ~/.dvipsrc for
+% dvips, or use the dvips -t papersize option instead as needed. See the
+% testflow documentation
+% http://www.ctan.org/tex-archive/macros/latex/contrib/IEEEtran/testflow
+% for more details on dvips paper size configuration.
+% The default is letterpaper.
+%
+% oneside, twoside
+% determines if layout follows single sided or two sided (duplex)
+% printing. The only notable change is with the headings at the top of
+% the pages.
+% The default is oneside.
+%
+% onecolumn, twocolumn
+% determines if text is organized into one or two columns per page. One
+% column mode is usually used only with draft papers.
+% The default is twocolumn.
+%
+% compsoc
+% Use the format of the IEEE Computer Society.
+%
+% romanappendices
+% Use the "Appendix I" convention when numbering appendices. IEEEtran.cls
+% now defaults to Alpha "Appendix A" convention - the opposite of what
+% v1.6b and earlier did.
+%
+% captionsoff
+% disables the display of the figure/table captions. Some IEEE journals
+% request that captions be removed and figures/tables be put on pages
+% of their own at the end of an initial paper submission. The endfloat
+% package can be used with this class option to achieve this format.
+%
+% nofonttune
+% turns off tuning of the font interword spacing. Maybe useful to those
+% not using the standard Times fonts or for those who have already "tuned"
+% their fonts.
+% The default is to enable IEEEtran to tune font parameters.
+%
+%
+%----------
+% Available CLASSINPUTs provided (all are macros unless otherwise noted):
+% \CLASSINPUTbaselinestretch
+% \CLASSINPUTinnersidemargin
+% \CLASSINPUToutersidemargin
+% \CLASSINPUTtoptextmargin
+% \CLASSINPUTbottomtextmargin
+%
+% Available CLASSINFOs provided:
+% \ifCLASSINFOpdf (TeX if conditional)
+% \CLASSINFOpaperwidth (macro)
+% \CLASSINFOpaperheight (macro)
+% \CLASSINFOnormalsizebaselineskip (length)
+% \CLASSINFOnormalsizeunitybaselineskip (length)
+%
+% Available CLASSOPTIONs provided:
+% all class option flags (TeX if conditionals) unless otherwise noted,
+% e.g., \ifCLASSOPTIONcaptionsoff
+% point size options provided as a single macro:
+% \CLASSOPTIONpt
+% which will be defined as 9, 10, 11, or 12 depending on the document's
+% normalsize point size.
+% also, class option peerreviewca implies the use of class option peerreview
+% and classoption draft implies the use of class option draftcls
+
+
+
+
+
+\ProvidesClass{IEEEtran}[2007/03/05 V1.7a by Michael Shell]
+\typeout{-- See the "IEEEtran_HOWTO" manual for usage information.}
+\typeout{-- http://www.michaelshell.org/tex/ieeetran/}
+\NeedsTeXFormat{LaTeX2e}
+
+% IEEEtran.cls version numbers, provided as of V1.3
+% These values serve as a way a .tex file can
+% determine if the new features are provided.
+% The version number of this IEEEtrans.cls can be obtained from
+% these values. i.e., V1.4
+% KEEP THESE AS INTEGERS! i.e., NO {4a} or anything like that-
+% (no need to enumerate "a" minor changes here)
+\def\IEEEtransversionmajor{1}
+\def\IEEEtransversionminor{7}
+
+% These do nothing, but provide them like in article.cls
+\newif\if@restonecol
+\newif\if@titlepage
+
+
+% class option conditionals
+\newif\ifCLASSOPTIONonecolumn \CLASSOPTIONonecolumnfalse
+\newif\ifCLASSOPTIONtwocolumn \CLASSOPTIONtwocolumntrue
+
+\newif\ifCLASSOPTIONoneside \CLASSOPTIONonesidetrue
+\newif\ifCLASSOPTIONtwoside \CLASSOPTIONtwosidefalse
+
+\newif\ifCLASSOPTIONfinal \CLASSOPTIONfinaltrue
+\newif\ifCLASSOPTIONdraft \CLASSOPTIONdraftfalse
+\newif\ifCLASSOPTIONdraftcls \CLASSOPTIONdraftclsfalse
+\newif\ifCLASSOPTIONdraftclsnofoot \CLASSOPTIONdraftclsnofootfalse
+
+\newif\ifCLASSOPTIONpeerreview \CLASSOPTIONpeerreviewfalse
+\newif\ifCLASSOPTIONpeerreviewca \CLASSOPTIONpeerreviewcafalse
+
+\newif\ifCLASSOPTIONjournal \CLASSOPTIONjournaltrue
+\newif\ifCLASSOPTIONconference \CLASSOPTIONconferencefalse
+\newif\ifCLASSOPTIONtechnote \CLASSOPTIONtechnotefalse
+
+\newif\ifCLASSOPTIONnofonttune \CLASSOPTIONnofonttunefalse
+
+\newif\ifCLASSOPTIONcaptionsoff \CLASSOPTIONcaptionsofffalse
+
+\newif\ifCLASSOPTIONcompsoc \CLASSOPTIONcompsocfalse
+
+\newif\ifCLASSOPTIONromanappendices \CLASSOPTIONromanappendicesfalse
+
+
+% class info conditionals
+
+% indicates if pdf (via pdflatex) output
+\newif\ifCLASSINFOpdf \CLASSINFOpdffalse
+
+
+% V1.6b internal flag to show if using a4paper
+\newif\if@IEEEusingAfourpaper \@IEEEusingAfourpaperfalse
+
+
+
+% IEEEtran class scratch pad registers
+% dimen
+\newdimen\@IEEEtrantmpdimenA
+\newdimen\@IEEEtrantmpdimenB
+% count
+\newcount\@IEEEtrantmpcountA
+\newcount\@IEEEtrantmpcountB
+% token list
+\newtoks\@IEEEtrantmptoksA
+
+% we use \CLASSOPTIONpt so that we can ID the point size (even for 9pt docs)
+% as well as LaTeX's \@ptsize to retain some compatability with some
+% external packages
+\def\@ptsize{0}
+% LaTeX does not support 9pt, so we set \@ptsize to 0 - same as that of 10pt
+\DeclareOption{9pt}{\def\CLASSOPTIONpt{9}\def\@ptsize{0}}
+\DeclareOption{10pt}{\def\CLASSOPTIONpt{10}\def\@ptsize{0}}
+\DeclareOption{11pt}{\def\CLASSOPTIONpt{11}\def\@ptsize{1}}
+\DeclareOption{12pt}{\def\CLASSOPTIONpt{12}\def\@ptsize{2}}
+
+
+
+\DeclareOption{letterpaper}{\setlength{\paperheight}{11in}%
+ \setlength{\paperwidth}{8.5in}%
+ \@IEEEusingAfourpaperfalse
+ \def\CLASSOPTIONpaper{letter}%
+ \def\CLASSINFOpaperwidth{8.5in}%
+ \def\CLASSINFOpaperheight{11in}}
+
+
+\DeclareOption{a4paper}{\setlength{\paperheight}{297mm}%
+ \setlength{\paperwidth}{210mm}%
+ \@IEEEusingAfourpapertrue
+ \def\CLASSOPTIONpaper{a4}%
+ \def\CLASSINFOpaperwidth{210mm}%
+ \def\CLASSINFOpaperheight{297mm}}
+
+\DeclareOption{oneside}{\@twosidefalse\@mparswitchfalse
+ \CLASSOPTIONonesidetrue\CLASSOPTIONtwosidefalse}
+\DeclareOption{twoside}{\@twosidetrue\@mparswitchtrue
+ \CLASSOPTIONtwosidetrue\CLASSOPTIONonesidefalse}
+
+\DeclareOption{onecolumn}{\CLASSOPTIONonecolumntrue\CLASSOPTIONtwocolumnfalse}
+\DeclareOption{twocolumn}{\CLASSOPTIONtwocolumntrue\CLASSOPTIONonecolumnfalse}
+
+% If the user selects draft, then this class AND any packages
+% will go into draft mode.
+\DeclareOption{draft}{\CLASSOPTIONdrafttrue\CLASSOPTIONdraftclstrue
+ \CLASSOPTIONdraftclsnofootfalse}
+% draftcls is for a draft mode which will not affect any packages
+% used by the document.
+\DeclareOption{draftcls}{\CLASSOPTIONdraftfalse\CLASSOPTIONdraftclstrue
+ \CLASSOPTIONdraftclsnofootfalse}
+% draftclsnofoot is like draftcls, but without the footer.
+\DeclareOption{draftclsnofoot}{\CLASSOPTIONdraftfalse\CLASSOPTIONdraftclstrue
+ \CLASSOPTIONdraftclsnofoottrue}
+\DeclareOption{final}{\CLASSOPTIONdraftfalse\CLASSOPTIONdraftclsfalse
+ \CLASSOPTIONdraftclsnofootfalse}
+
+\DeclareOption{journal}{\CLASSOPTIONpeerreviewfalse\CLASSOPTIONpeerreviewcafalse
+ \CLASSOPTIONjournaltrue\CLASSOPTIONconferencefalse\CLASSOPTIONtechnotefalse}
+
+\DeclareOption{conference}{\CLASSOPTIONpeerreviewfalse\CLASSOPTIONpeerreviewcafalse
+ \CLASSOPTIONjournalfalse\CLASSOPTIONconferencetrue\CLASSOPTIONtechnotefalse}
+
+\DeclareOption{technote}{\CLASSOPTIONpeerreviewfalse\CLASSOPTIONpeerreviewcafalse
+ \CLASSOPTIONjournalfalse\CLASSOPTIONconferencefalse\CLASSOPTIONtechnotetrue}
+
+\DeclareOption{peerreview}{\CLASSOPTIONpeerreviewtrue\CLASSOPTIONpeerreviewcafalse
+ \CLASSOPTIONjournalfalse\CLASSOPTIONconferencefalse\CLASSOPTIONtechnotefalse}
+
+\DeclareOption{peerreviewca}{\CLASSOPTIONpeerreviewtrue\CLASSOPTIONpeerreviewcatrue
+ \CLASSOPTIONjournalfalse\CLASSOPTIONconferencefalse\CLASSOPTIONtechnotefalse}
+
+\DeclareOption{nofonttune}{\CLASSOPTIONnofonttunetrue}
+
+\DeclareOption{captionsoff}{\CLASSOPTIONcaptionsofftrue}
+
+\DeclareOption{compsoc}{\CLASSOPTIONcompsoctrue}
+
+\DeclareOption{romanappendices}{\CLASSOPTIONromanappendicestrue}
+
+
+% default to US letter paper, 10pt, twocolumn, one sided, final, journal
+\ExecuteOptions{letterpaper,10pt,twocolumn,oneside,final,journal}
+% overrride these defaults per user requests
+\ProcessOptions
+
+
+
+% Computer Society conditional execution command
+\long\def\@IEEEcompsoconly#1{\relax\ifCLASSOPTIONcompsoc\relax#1\relax\fi\relax}
+% inverse
+\long\def\@IEEEnotcompsoconly#1{\relax\ifCLASSOPTIONcompsoc\else\relax#1\relax\fi\relax}
+% compsoc conference
+\long\def\@IEEEcompsocconfonly#1{\relax\ifCLASSOPTIONcompsoc\ifCLASSOPTIONconference\relax#1\relax\fi\fi\relax}
+% compsoc not conference
+\long\def\@IEEEcompsocnotconfonly#1{\relax\ifCLASSOPTIONcompsoc\ifCLASSOPTIONconference\else\relax#1\relax\fi\fi\relax}
+
+
+% IEEE uses Times Roman font, so we'll default to Times.
+% These three commands make up the entire times.sty package.
+\renewcommand{\sfdefault}{phv}
+\renewcommand{\rmdefault}{ptm}
+\renewcommand{\ttdefault}{pcr}
+
+\@IEEEcompsoconly{\typeout{-- Using IEEE Computer Society mode.}}
+
+% V1.7 compsoc nonconference papers, use Palatino/Palladio as the main text font,
+% not Times Roman.
+\@IEEEcompsocnotconfonly{\renewcommand{\rmdefault}{ppl}}
+
+% enable Times/Palatino main text font
+\normalfont\selectfont
+
+
+
+
+
+% V1.7 conference notice message hook
+\def\@IEEEconsolenoticeconference{\typeout{}%
+\typeout{** Conference Paper **}%
+\typeout{Before submitting the final camera ready copy, remember to:}%
+\typeout{}%
+\typeout{ 1. Manually equalize the lengths of two columns on the last page}%
+\typeout{ of your paper;}%
+\typeout{}%
+\typeout{ 2. Ensure that any PostScript and/or PDF output post-processing}%
+\typeout{ uses only Type 1 fonts and that every step in the generation}%
+\typeout{ process uses the appropriate paper size.}%
+\typeout{}}
+
+
+% we can send console reminder messages to the user here
+\AtEndDocument{\ifCLASSOPTIONconference\@IEEEconsolenoticeconference\fi}
+
+
+% warn about the use of single column other than for draft mode
+\ifCLASSOPTIONtwocolumn\else%
+ \ifCLASSOPTIONdraftcls\else%
+ \typeout{** ATTENTION: Single column mode is not typically used with IEEE publications.}%
+ \fi%
+\fi
+
+
+% V1.7 improved paper size setting code.
+% Set pdfpage and dvips paper sizes. Conditional tests are similar to that
+% of ifpdf.sty. Retain within {} to ensure tested macros are never altered,
+% even if only effect is to set them to \relax.
+% if \pdfoutput is undefined or equal to relax, output a dvips special
+{\@ifundefined{pdfoutput}{\AtBeginDvi{\special{papersize=\CLASSINFOpaperwidth,\CLASSINFOpaperheight}}}{%
+% pdfoutput is defined and not equal to \relax
+% check for pdfpageheight existence just in case someone sets pdfoutput
+% under non-pdflatex. If exists, set them regardless of value of \pdfoutput.
+\@ifundefined{pdfpageheight}{\relax}{\global\pdfpagewidth\paperwidth
+\global\pdfpageheight\paperheight}%
+% if using \pdfoutput=0 under pdflatex, send dvips papersize special
+\ifcase\pdfoutput
+\AtBeginDvi{\special{papersize=\CLASSINFOpaperwidth,\CLASSINFOpaperheight}}%
+\else
+% we are using pdf output, set CLASSINFOpdf flag
+\global\CLASSINFOpdftrue
+\fi}}
+
+% let the user know the selected papersize
+\typeout{-- Using \CLASSINFOpaperwidth\space x \CLASSINFOpaperheight\space
+(\CLASSOPTIONpaper)\space paper.}
+
+\ifCLASSINFOpdf
+\typeout{-- Using PDF output.}
+\else
+\typeout{-- Using DVI output.}
+\fi
+
+
+% The idea hinted here is for LaTeX to generate markleft{} and markright{}
+% automatically for you after you enter \author{}, \journal{},
+% \journaldate{}, journalvol{}, \journalnum{}, etc.
+% However, there may be some backward compatibility issues here as
+% well as some special applications for IEEEtran.cls and special issues
+% that may require the flexible \markleft{}, \markright{} and/or \markboth{}.
+% We'll leave this as an open future suggestion.
+%\newcommand{\journal}[1]{\def\@journal{#1}}
+%\def\@journal{}
+
+
+
+% pointsize values
+% used with ifx to determine the document's normal size
+\def\@IEEEptsizenine{9}
+\def\@IEEEptsizeten{10}
+\def\@IEEEptsizeeleven{11}
+\def\@IEEEptsizetwelve{12}
+
+
+
+% FONT DEFINITIONS (No sizexx.clo file needed)
+% V1.6 revised font sizes, displayskip values and
+% revised normalsize baselineskip to reduce underfull vbox problems
+% on the 58pc = 696pt = 9.5in text height we want
+% normalsize #lines/column baselineskip (aka leading)
+% 9pt 63 11.0476pt (truncated down)
+% 10pt 58 12pt (exact)
+% 11pt 52 13.3846pt (truncated down)
+% 12pt 50 13.92pt (exact)
+%
+
+% we need to store the nominal baselineskip for the given font size
+% in case baselinestretch ever changes.
+% this is a dimen, so it will not hold stretch or shrink
+\newdimen\@IEEEnormalsizeunitybaselineskip
+\@IEEEnormalsizeunitybaselineskip\baselineskip
+
+\ifx\CLASSOPTIONpt\@IEEEptsizenine
+\typeout{-- This is a 9 point document.}
+\def\normalsize{\@setfontsize{\normalsize}{9}{11.0476pt}}%
+\setlength{\@IEEEnormalsizeunitybaselineskip}{11.0476pt}%
+\normalsize
+\abovedisplayskip 1.5ex plus3pt minus1pt%
+\belowdisplayskip \abovedisplayskip%
+\abovedisplayshortskip 0pt plus3pt%
+\belowdisplayshortskip 1.5ex plus3pt minus1pt
+\def\small{\@setfontsize{\small}{8.5}{10pt}}
+\def\footnotesize{\@setfontsize{\footnotesize}{8}{9pt}}
+\def\scriptsize{\@setfontsize{\scriptsize}{7}{8pt}}
+\def\tiny{\@setfontsize{\tiny}{5}{6pt}}
+% sublargesize is the same as large - 10pt
+\def\sublargesize{\@setfontsize{\sublargesize}{10}{12pt}}
+\def\large{\@setfontsize{\large}{10}{12pt}}
+\def\Large{\@setfontsize{\Large}{12}{14pt}}
+\def\LARGE{\@setfontsize{\LARGE}{14}{17pt}}
+\def\huge{\@setfontsize{\huge}{17}{20pt}}
+\def\Huge{\@setfontsize{\Huge}{20}{24pt}}
+\fi
+
+
+% Check if we have selected 10 points
+\ifx\CLASSOPTIONpt\@IEEEptsizeten
+\typeout{-- This is a 10 point document.}
+\def\normalsize{\@setfontsize{\normalsize}{10}{12.00pt}}%
+\setlength{\@IEEEnormalsizeunitybaselineskip}{12pt}%
+\normalsize
+\abovedisplayskip 1.5ex plus4pt minus2pt%
+\belowdisplayskip \abovedisplayskip%
+\abovedisplayshortskip 0pt plus4pt%
+\belowdisplayshortskip 1.5ex plus4pt minus2pt
+\def\small{\@setfontsize{\small}{9}{10pt}}
+\def\footnotesize{\@setfontsize{\footnotesize}{8}{9pt}}
+\def\scriptsize{\@setfontsize{\scriptsize}{7}{8pt}}
+\def\tiny{\@setfontsize{\tiny}{5}{6pt}}
+% sublargesize is a tad smaller than large - 11pt
+\def\sublargesize{\@setfontsize{\sublargesize}{11}{13.4pt}}
+\def\large{\@setfontsize{\large}{12}{14pt}}
+\def\Large{\@setfontsize{\Large}{14}{17pt}}
+\def\LARGE{\@setfontsize{\LARGE}{17}{20pt}}
+\def\huge{\@setfontsize{\huge}{20}{24pt}}
+\def\Huge{\@setfontsize{\Huge}{24}{28pt}}
+\fi
+
+
+% Check if we have selected 11 points
+\ifx\CLASSOPTIONpt\@IEEEptsizeeleven
+\typeout{-- This is an 11 point document.}
+\def\normalsize{\@setfontsize{\normalsize}{11}{13.3846pt}}%
+\setlength{\@IEEEnormalsizeunitybaselineskip}{13.3846pt}%
+\normalsize
+\abovedisplayskip 1.5ex plus5pt minus3pt%
+\belowdisplayskip \abovedisplayskip%
+\abovedisplayshortskip 0pt plus5pt%
+\belowdisplayshortskip 1.5ex plus5pt minus3pt
+\def\small{\@setfontsize{\small}{10}{12pt}}
+\def\footnotesize{\@setfontsize{\footnotesize}{9}{10.5pt}}
+\def\scriptsize{\@setfontsize{\scriptsize}{8}{9pt}}
+\def\tiny{\@setfontsize{\tiny}{6}{7pt}}
+% sublargesize is the same as large - 12pt
+\def\sublargesize{\@setfontsize{\sublargesize}{12}{14pt}}
+\def\large{\@setfontsize{\large}{12}{14pt}}
+\def\Large{\@setfontsize{\Large}{14}{17pt}}
+\def\LARGE{\@setfontsize{\LARGE}{17}{20pt}}
+\def\huge{\@setfontsize{\huge}{20}{24pt}}
+\def\Huge{\@setfontsize{\Huge}{24}{28pt}}
+\fi
+
+
+% Check if we have selected 12 points
+\ifx\CLASSOPTIONpt\@IEEEptsizetwelve
+\typeout{-- This is a 12 point document.}
+\def\normalsize{\@setfontsize{\normalsize}{12}{13.92pt}}%
+\setlength{\@IEEEnormalsizeunitybaselineskip}{13.92pt}%
+\normalsize
+\abovedisplayskip 1.5ex plus6pt minus4pt%
+\belowdisplayskip \abovedisplayskip%
+\abovedisplayshortskip 0pt plus6pt%
+\belowdisplayshortskip 1.5ex plus6pt minus4pt
+\def\small{\@setfontsize{\small}{10}{12pt}}
+\def\footnotesize{\@setfontsize{\footnotesize}{9}{10.5pt}}
+\def\scriptsize{\@setfontsize{\scriptsize}{8}{9pt}}
+\def\tiny{\@setfontsize{\tiny}{6}{7pt}}
+% sublargesize is the same as large - 14pt
+\def\sublargesize{\@setfontsize{\sublargesize}{14}{17pt}}
+\def\large{\@setfontsize{\large}{14}{17pt}}
+\def\Large{\@setfontsize{\Large}{17}{20pt}}
+\def\LARGE{\@setfontsize{\LARGE}{20}{24pt}}
+\def\huge{\@setfontsize{\huge}{22}{26pt}}
+\def\Huge{\@setfontsize{\Huge}{24}{28pt}}
+\fi
+
+
+% V1.6 The Computer Modern Fonts will issue a substitution warning for
+% 24pt titles (24.88pt is used instead) increase the substitution
+% tolerance to turn off this warning
+\def\fontsubfuzz{.9pt}
+% However, the default (and correct) Times font will scale exactly as needed.
+
+
+% warn the user in case they forget to use the 9pt option with
+% technote
+\ifCLASSOPTIONtechnote%
+ \ifx\CLASSOPTIONpt\@IEEEptsizenine\else%
+ \typeout{** ATTENTION: Technotes are normally 9pt documents.}%
+ \fi%
+\fi
+
+
+% V1.7
+% Improved \textunderscore to provide a much better fake _ when used with
+% OT1 encoding. Under OT1, detect use of pcr or cmtt \ttfamily and use
+% available true _ glyph for those two typewriter fonts.
+\def\@IEEEstringptm{ptm} % Times Roman family
+\def\@IEEEstringppl{ppl} % Palatino Roman family
+\def\@IEEEstringphv{phv} % Helvetica Sans Serif family
+\def\@IEEEstringpcr{pcr} % Courier typewriter family
+\def\@IEEEstringcmtt{cmtt} % Computer Modern typewriter family
+\DeclareTextCommandDefault{\textunderscore}{\leavevmode
+\ifx\f@family\@IEEEstringpcr\string_\else
+\ifx\f@family\@IEEEstringcmtt\string_\else
+\ifx\f@family\@IEEEstringptm\kern 0em\vbox{\hrule\@width 0.5em\@height 0.5pt\kern -0.3ex}\else
+\ifx\f@family\@IEEEstringppl\kern 0em\vbox{\hrule\@width 0.5em\@height 0.5pt\kern -0.3ex}\else
+\ifx\f@family\@IEEEstringphv\kern -0.03em\vbox{\hrule\@width 0.62em\@height 0.52pt\kern -0.33ex}\kern -0.03em\else
+\kern 0.09em\vbox{\hrule\@width 0.6em\@height 0.44pt\kern -0.63pt\kern -0.42ex}\kern 0.09em\fi\fi\fi\fi\fi\relax}
+
+
+
+
+% set the default \baselinestretch
+\def\baselinestretch{1}
+\ifCLASSOPTIONdraftcls
+ \def\baselinestretch{1.5}% default baselinestretch for draft modes
+\fi
+
+
+% process CLASSINPUT baselinestretch
+\ifx\CLASSINPUTbaselinestretch\@IEEEundefined
+\else
+ \edef\baselinestretch{\CLASSINPUTbaselinestretch} % user CLASSINPUT override
+ \typeout{** ATTENTION: Overriding \string\baselinestretch\space to
+ \baselinestretch\space via \string\CLASSINPUT.}
+\fi
+
+\normalsize % make \baselinestretch take affect
+
+
+
+
+% store the normalsize baselineskip
+\newdimen\CLASSINFOnormalsizebaselineskip
+\CLASSINFOnormalsizebaselineskip=\baselineskip\relax
+% and the normalsize unity (baselinestretch=1) baselineskip
+% we could save a register by giving the user access to
+% \@IEEEnormalsizeunitybaselineskip. However, let's protect
+% its read only internal status
+\newdimen\CLASSINFOnormalsizeunitybaselineskip
+\CLASSINFOnormalsizeunitybaselineskip=\@IEEEnormalsizeunitybaselineskip\relax
+% store the nominal value of jot
+\newdimen\IEEEnormaljot
+\IEEEnormaljot=0.25\baselineskip\relax
+
+% set \jot
+\jot=\IEEEnormaljot\relax
+
+
+
+
+% V1.6, we are now going to fine tune the interword spacing
+% The default interword glue for Times under TeX appears to use a
+% nominal interword spacing of 25% (relative to the font size, i.e., 1em)
+% a maximum of 40% and a minimum of 19%.
+% For example, 10pt text uses an interword glue of:
+%
+% 2.5pt plus 1.49998pt minus 0.59998pt
+%
+% However, IEEE allows for a more generous range which reduces the need
+% for hyphenation, especially for two column text. Furthermore, IEEE
+% tends to use a little bit more nominal space between the words.
+% IEEE's interword spacing percentages appear to be:
+% 35% nominal
+% 23% minimum
+% 50% maximum
+% (They may even be using a tad more for the largest fonts such as 24pt.)
+%
+% for bold text, IEEE increases the spacing a little more:
+% 37.5% nominal
+% 23% minimum
+% 55% maximum
+
+% here are the interword spacing ratios we'll use
+% for medium (normal weight)
+\def\@IEEEinterspaceratioM{0.35}
+\def\@IEEEinterspaceMINratioM{0.23}
+\def\@IEEEinterspaceMAXratioM{0.50}
+
+% for bold
+\def\@IEEEinterspaceratioB{0.375}
+\def\@IEEEinterspaceMINratioB{0.23}
+\def\@IEEEinterspaceMAXratioB{0.55}
+
+
+% command to revise the interword spacing for the current font under TeX:
+% \fontdimen2 = nominal interword space
+% \fontdimen3 = interword stretch
+% \fontdimen4 = interword shrink
+% since all changes to the \fontdimen are global, we can enclose these commands
+% in braces to confine any font attribute or length changes
+\def\@@@IEEEsetfontdimens#1#2#3{{%
+\setlength{\@IEEEtrantmpdimenB}{\f@size pt}% grab the font size in pt, could use 1em instead.
+\setlength{\@IEEEtrantmpdimenA}{#1\@IEEEtrantmpdimenB}%
+\fontdimen2\font=\@IEEEtrantmpdimenA\relax
+\addtolength{\@IEEEtrantmpdimenA}{-#2\@IEEEtrantmpdimenB}%
+\fontdimen3\font=-\@IEEEtrantmpdimenA\relax
+\setlength{\@IEEEtrantmpdimenA}{#1\@IEEEtrantmpdimenB}%
+\addtolength{\@IEEEtrantmpdimenA}{-#3\@IEEEtrantmpdimenB}%
+\fontdimen4\font=\@IEEEtrantmpdimenA\relax}}
+
+% revise the interword spacing for each font weight
+\def\@@IEEEsetfontdimens{{%
+\mdseries
+\@@@IEEEsetfontdimens{\@IEEEinterspaceratioM}{\@IEEEinterspaceMAXratioM}{\@IEEEinterspaceMINratioM}%
+\bfseries
+\@@@IEEEsetfontdimens{\@IEEEinterspaceratioB}{\@IEEEinterspaceMAXratioB}{\@IEEEinterspaceMINratioB}%
+}}
+
+% revise the interword spacing for each font shape
+% \slshape is not often used for IEEE work and is not altered here. The \scshape caps are
+% already a tad too large in the free LaTeX fonts (as compared to what IEEE uses) so we
+% won't alter these either.
+\def\@IEEEsetfontdimens{{%
+\normalfont
+\@@IEEEsetfontdimens
+\normalfont\itshape
+\@@IEEEsetfontdimens
+}}
+
+% command to revise the interword spacing for each font size (and shape
+% and weight). Only the \rmfamily is done here as \ttfamily uses a
+% fixed spacing and \sffamily is not used as the main text of IEEE papers.
+\def\@IEEEtunefonts{{\selectfont\rmfamily
+\tiny\@IEEEsetfontdimens
+\scriptsize\@IEEEsetfontdimens
+\footnotesize\@IEEEsetfontdimens
+\small\@IEEEsetfontdimens
+\normalsize\@IEEEsetfontdimens
+\sublargesize\@IEEEsetfontdimens
+\large\@IEEEsetfontdimens
+\LARGE\@IEEEsetfontdimens
+\huge\@IEEEsetfontdimens
+\Huge\@IEEEsetfontdimens}}
+
+% if the nofonttune class option is not given, revise the interword spacing
+% now - in case IEEEtran makes any default length measurements, and make
+% sure all the default fonts are loaded
+\ifCLASSOPTIONnofonttune\else
+\@IEEEtunefonts
+\fi
+
+% and again at the start of the document in case the user loaded different fonts
+\AtBeginDocument{\ifCLASSOPTIONnofonttune\else\@IEEEtunefonts\fi}
+
+
+
+% V1.6
+% LaTeX is a little to quick to use hyphenations
+% So, we increase the penalty for their use and raise
+% the badness level that triggers an underfull hbox
+% warning. The author may still have to tweak things,
+% but the appearance will be much better "right out
+% of the box" than that under V1.5 and prior.
+% TeX default is 50
+\hyphenpenalty=750
+% If we didn't adjust the interword spacing, 2200 might be better.
+% The TeX default is 1000
+\hbadness=1350
+% IEEE does not use extra spacing after punctuation
+\frenchspacing
+
+% V1.7 increase this a tad to discourage equation breaks
+\binoppenalty=1000 % default 700
+\relpenalty=800 % default 500
+
+
+% margin note stuff
+\marginparsep 10pt
+\marginparwidth 20pt
+\marginparpush 25pt
+
+
+% if things get too close, go ahead and let them touch
+\lineskip 0pt
+\normallineskip 0pt
+\lineskiplimit 0pt
+\normallineskiplimit 0pt
+
+% The distance from the lower edge of the text body to the
+% footline
+\footskip 0.4in
+
+% normally zero, should be relative to font height.
+% put in a little rubber to help stop some bad breaks (underfull vboxes)
+\parskip 0ex plus 0.2ex minus 0.1ex
+
+\parindent 1.0em
+
+\topmargin -49.0pt
+\headheight 12pt
+\headsep 0.25in
+
+% use the normal font baselineskip
+% so that \topskip is unaffected by changes in \baselinestretch
+\topskip=\@IEEEnormalsizeunitybaselineskip
+\textheight 58pc % 9.63in, 696pt
+% Tweak textheight to a perfect integer number of lines/page.
+% The normal baselineskip for each document point size is used
+% to determine these values.
+\ifx\CLASSOPTIONpt\@IEEEptsizenine\textheight=63\@IEEEnormalsizeunitybaselineskip\fi % 63 lines/page
+\ifx\CLASSOPTIONpt\@IEEEptsizeten\textheight=58\@IEEEnormalsizeunitybaselineskip\fi % 58 lines/page
+\ifx\CLASSOPTIONpt\@IEEEptsizeeleven\textheight=52\@IEEEnormalsizeunitybaselineskip\fi % 52 lines/page
+\ifx\CLASSOPTIONpt\@IEEEptsizetwelve\textheight=50\@IEEEnormalsizeunitybaselineskip\fi % 50 lines/page
+
+
+\columnsep 1pc
+\textwidth 43pc % 2 x 21pc + 1pc = 43pc
+
+
+% the default side margins are equal
+\if@IEEEusingAfourpaper
+\oddsidemargin 14.32mm
+\evensidemargin 14.32mm
+\else
+\oddsidemargin 0.680in
+\evensidemargin 0.680in
+\fi
+% compensate for LaTeX's 1in offset
+\addtolength{\oddsidemargin}{-1in}
+\addtolength{\evensidemargin}{-1in}
+
+
+
+% adjust margins for conference mode
+\ifCLASSOPTIONconference
+ \topmargin -0.25in
+ % we retain the reserved, but unused space for headers
+ \addtolength{\topmargin}{-\headheight}
+ \addtolength{\topmargin}{-\headsep}
+ \textheight 9.25in % The standard for conferences (668.4975pt)
+ % Tweak textheight to a perfect integer number of lines/page.
+ \ifx\CLASSOPTIONpt\@IEEEptsizenine\textheight=61\@IEEEnormalsizeunitybaselineskip\fi % 61 lines/page
+ \ifx\CLASSOPTIONpt\@IEEEptsizeten\textheight=56\@IEEEnormalsizeunitybaselineskip\fi % 56 lines/page
+ \ifx\CLASSOPTIONpt\@IEEEptsizeeleven\textheight=50\@IEEEnormalsizeunitybaselineskip\fi % 50 lines/page
+ \ifx\CLASSOPTIONpt\@IEEEptsizetwelve\textheight=48\@IEEEnormalsizeunitybaselineskip\fi % 48 lines/page
+\fi
+
+
+% compsoc conference
+\ifCLASSOPTIONcompsoc
+\ifCLASSOPTIONconference
+ % compsoc conference use a larger value for columnsep
+ \columnsep 0.375in
+ % compsoc conferences want 1in top margin, 1.125in bottom margin
+ \topmargin 0in
+ \addtolength{\topmargin}{-6pt}% we tweak this a tad to better comply with top of line stuff
+ % we retain the reserved, but unused space for headers
+ \addtolength{\topmargin}{-\headheight}
+ \addtolength{\topmargin}{-\headsep}
+ \textheight 8.875in % (641.39625pt)
+ % Tweak textheight to a perfect integer number of lines/page.
+ \ifx\CLASSOPTIONpt\@IEEEptsizenine\textheight=58\@IEEEnormalsizeunitybaselineskip\fi % 58 lines/page
+ \ifx\CLASSOPTIONpt\@IEEEptsizeten\textheight=53\@IEEEnormalsizeunitybaselineskip\fi % 53 lines/page
+ \ifx\CLASSOPTIONpt\@IEEEptsizeeleven\textheight=48\@IEEEnormalsizeunitybaselineskip\fi % 48 lines/page
+ \ifx\CLASSOPTIONpt\@IEEEptsizetwelve\textheight=46\@IEEEnormalsizeunitybaselineskip\fi % 46 lines/page
+ \textwidth 6.5in
+ % the default side margins are equal
+ \if@IEEEusingAfourpaper
+ \oddsidemargin 22.45mm
+ \evensidemargin 22.45mm
+ \else
+ \oddsidemargin 1in
+ \evensidemargin 1in
+ \fi
+ % compensate for LaTeX's 1in offset
+ \addtolength{\oddsidemargin}{-1in}
+ \addtolength{\evensidemargin}{-1in}
+\fi\fi
+
+
+
+% draft mode settings override that of all other modes
+% provides a nice 1in margin all around the paper and extra
+% space between the lines for editor's comments
+\ifCLASSOPTIONdraftcls
+ % want 1in from top of paper to text
+ \setlength{\topmargin}{-\headsep}%
+ \addtolength{\topmargin}{-\headheight}%
+ % we want 1in side margins regardless of paper type
+ \oddsidemargin 0in
+ \evensidemargin 0in
+ % set the text width
+ \setlength{\textwidth}{\paperwidth}%
+ \addtolength{\textwidth}{-2.0in}%
+ \setlength{\textheight}{\paperheight}%
+ \addtolength{\textheight}{-2.0in}%
+ % digitize textheight to be an integer number of lines.
+ % this may cause the bottom margin to be off a tad
+ \addtolength{\textheight}{-1\topskip}%
+ \divide\textheight by \baselineskip%
+ \multiply\textheight by \baselineskip%
+ \addtolength{\textheight}{\topskip}%
+\fi
+
+
+
+% process CLASSINPUT inner/outer margin
+% if inner margin defined, but outer margin not, set outer to inner.
+\ifx\CLASSINPUTinnersidemargin\@IEEEundefined
+\else
+ \ifx\CLASSINPUToutersidemargin\@IEEEundefined
+ \edef\CLASSINPUToutersidemargin{\CLASSINPUTinnersidemargin}
+ \fi
+\fi
+
+\ifx\CLASSINPUToutersidemargin\@IEEEundefined
+\else
+ % if outer margin defined, but inner margin not, set inner to outer.
+ \ifx\CLASSINPUTinnersidemargin\@IEEEundefined
+ \edef\CLASSINPUTinnersidemargin{\CLASSINPUToutersidemargin}
+ \fi
+ \setlength{\oddsidemargin}{\CLASSINPUTinnersidemargin}
+ \ifCLASSOPTIONtwoside
+ \setlength{\evensidemargin}{\CLASSINPUToutersidemargin}
+ \else
+ \setlength{\evensidemargin}{\CLASSINPUTinnersidemargin}
+ \fi
+ \addtolength{\oddsidemargin}{-1in}
+ \addtolength{\evensidemargin}{-1in}
+ \setlength{\textwidth}{\paperwidth}
+ \addtolength{\textwidth}{-\CLASSINPUTinnersidemargin}
+ \addtolength{\textwidth}{-\CLASSINPUToutersidemargin}
+ \typeout{** ATTENTION: Overriding inner side margin to \CLASSINPUTinnersidemargin\space and
+ outer side margin to \CLASSINPUToutersidemargin\space via \string\CLASSINPUT.}
+\fi
+
+
+
+% process CLASSINPUT top/bottom text margin
+% if toptext margin defined, but bottomtext margin not, set bottomtext to toptext margin
+\ifx\CLASSINPUTtoptextmargin\@IEEEundefined
+\else
+ \ifx\CLASSINPUTbottomtextmargin\@IEEEundefined
+ \edef\CLASSINPUTbottomtextmargin{\CLASSINPUTtoptextmargin}
+ \fi
+\fi
+
+\ifx\CLASSINPUTbottomtextmargin\@IEEEundefined
+\else
+ % if bottomtext margin defined, but toptext margin not, set toptext to bottomtext margin
+ \ifx\CLASSINPUTtoptextmargin\@IEEEundefined
+ \edef\CLASSINPUTtoptextmargin{\CLASSINPUTbottomtextmargin}
+ \fi
+ \setlength{\topmargin}{\CLASSINPUTtoptextmargin}
+ \addtolength{\topmargin}{-1in}
+ \addtolength{\topmargin}{-\headheight}
+ \addtolength{\topmargin}{-\headsep}
+ \setlength{\textheight}{\paperheight}
+ \addtolength{\textheight}{-\CLASSINPUTtoptextmargin}
+ \addtolength{\textheight}{-\CLASSINPUTbottomtextmargin}
+ % in the default format we use the normal baselineskip as topskip
+ % we only need 0.7 of this to clear typical top text and we need
+ % an extra 0.3 spacing at the bottom for descenders. This will
+ % correct for both.
+ \addtolength{\topmargin}{-0.3\@IEEEnormalsizeunitybaselineskip}
+ \typeout{** ATTENTION: Overriding top text margin to \CLASSINPUTtoptextmargin\space and
+ bottom text margin to \CLASSINPUTbottomtextmargin\space via \string\CLASSINPUT.}
+\fi
+
+
+
+
+
+
+
+% LIST SPACING CONTROLS
+
+% Controls the amount of EXTRA spacing
+% above and below \trivlist
+% Both \list and IED lists override this.
+% However, \trivlist will use this as will most
+% things built from \trivlist like the \center
+% environment.
+\topsep 0.5\baselineskip
+
+% Controls the additional spacing around lists preceded
+% or followed by blank lines. IEEE does not increase
+% spacing before or after paragraphs so it is set to zero.
+% \z@ is the same as zero, but faster.
+\partopsep \z@
+
+% Controls the spacing between paragraphs in lists.
+% IEEE does not increase spacing before or after paragraphs
+% so this is also zero.
+% With IEEEtran.cls, global changes to
+% this value DO affect lists (but not IED lists).
+\parsep \z@
+
+% Controls the extra spacing between list items.
+% IEEE does not put extra spacing between items.
+% With IEEEtran.cls, global changes to this value DO affect
+% lists (but not IED lists).
+\itemsep \z@
+
+% \itemindent is the amount to indent the FIRST line of a list
+% item. It is auto set to zero within the \list environment. To alter
+% it, you have to do so when you call the \list.
+% However, IEEE uses this for the theorem environment
+% There is an alternative value for this near \leftmargini below
+\itemindent -1em
+
+% \leftmargin, the spacing from the left margin of the main text to
+% the left of the main body of a list item is set by \list.
+% Hence this statement does nothing for lists.
+% But, quote and verse do use it for indention.
+\leftmargin 2em
+
+% we retain this stuff from the older IEEEtran.cls so that \list
+% will work the same way as before. However, itemize, enumerate and
+% description (IED) could care less about what these are as they
+% all are overridden.
+\leftmargini 2em
+%\itemindent 2em % Alternative values: sometimes used.
+%\leftmargini 0em
+\leftmarginii 1em
+\leftmarginiii 1.5em
+\leftmarginiv 1.5em
+\leftmarginv 1.0em
+\leftmarginvi 1.0em
+\labelsep 0.5em
+\labelwidth \z@
+
+
+% The old IEEEtran.cls behavior of \list is retained.
+% However, the new V1.3 IED list environments override all the
+% @list stuff (\@listX is called within \list for the
+% appropriate level just before the user's list_decl is called).
+% \topsep is now 2pt as IEEE puts a little extra space around
+% lists - used by those non-IED macros that depend on \list.
+% Note that \parsep and \itemsep are not redefined as in
+% the sizexx.clo \@listX (which article.cls uses) so global changes
+% of these values DO affect \list
+%
+\def\@listi{\leftmargin\leftmargini \topsep 2pt plus 1pt minus 1pt}
+\let\@listI\@listi
+\def\@listii{\leftmargin\leftmarginii\labelwidth\leftmarginii%
+ \advance\labelwidth-\labelsep \topsep 2pt}
+\def\@listiii{\leftmargin\leftmarginiii\labelwidth\leftmarginiii%
+ \advance\labelwidth-\labelsep \topsep 2pt}
+\def\@listiv{\leftmargin\leftmarginiv\labelwidth\leftmarginiv%
+ \advance\labelwidth-\labelsep \topsep 2pt}
+\def\@listv{\leftmargin\leftmarginv\labelwidth\leftmarginv%
+ \advance\labelwidth-\labelsep \topsep 2pt}
+\def\@listvi{\leftmargin\leftmarginvi\labelwidth\leftmarginvi%
+ \advance\labelwidth-\labelsep \topsep 2pt}
+
+
+% IEEE uses 5) not 5.
+\def\labelenumi{\theenumi)} \def\theenumi{\arabic{enumi}}
+
+% IEEE uses a) not (a)
+\def\labelenumii{\theenumii)} \def\theenumii{\alph{enumii}}
+
+% IEEE uses iii) not iii.
+\def\labelenumiii{\theenumiii)} \def\theenumiii{\roman{enumiii}}
+
+% IEEE uses A) not A.
+\def\labelenumiv{\theenumiv)} \def\theenumiv{\Alph{enumiv}}
+
+% exactly the same as in article.cls
+\def\p@enumii{\theenumi}
+\def\p@enumiii{\theenumi(\theenumii)}
+\def\p@enumiv{\p@enumiii\theenumiii}
+
+% itemized list label styles
+\def\labelitemi{$\scriptstyle\bullet$}
+\def\labelitemii{\textbf{--}}
+\def\labelitemiii{$\ast$}
+\def\labelitemiv{$\cdot$}
+
+
+
+% **** V1.3 ENHANCEMENTS ****
+% Itemize, Enumerate and Description (IED) List Controls
+% ***************************
+%
+%
+% IEEE seems to use at least two different values by
+% which ITEMIZED list labels are indented to the right
+% For The Journal of Lightwave Technology (JLT) and The Journal
+% on Selected Areas in Communications (JSAC), they tend to use
+% an indention equal to \parindent. For Transactions on Communications
+% they tend to indent ITEMIZED lists a little more--- 1.3\parindent.
+% We'll provide both values here for you so that you can choose
+% which one you like in your document using a command such as:
+% setlength{\IEEEilabelindent}{\IEEEilabelindentB}
+\newdimen\IEEEilabelindentA
+\IEEEilabelindentA \parindent
+
+\newdimen\IEEEilabelindentB
+\IEEEilabelindentB 1.3\parindent
+% However, we'll default to using \parindent
+% which makes more sense to me
+\newdimen\IEEEilabelindent
+\IEEEilabelindent \IEEEilabelindentA
+
+
+% This controls the default amount the enumerated list labels
+% are indented to the right.
+% Normally, this is the same as the paragraph indention
+\newdimen\IEEEelabelindent
+\IEEEelabelindent \parindent
+
+% This controls the default amount the description list labels
+% are indented to the right.
+% Normally, this is the same as the paragraph indention
+\newdimen\IEEEdlabelindent
+\IEEEdlabelindent \parindent
+
+% This is the value actually used within the IED lists.
+% The IED environments automatically set its value to
+% one of the three values above, so global changes do
+% not have any effect
+\newdimen\IEEElabelindent
+\IEEElabelindent \parindent
+
+% The actual amount labels will be indented is
+% \IEEElabelindent multiplied by the factor below
+% corresponding to the level of nesting depth
+% This provides a means by which the user can
+% alter the effective \IEEElabelindent for deeper
+% levels
+% There may not be such a thing as correct "standard IEEE"
+% values. What IEEE actually does may depend on the specific
+% circumstances.
+% The first list level almost always has full indention.
+% The second levels I've seen have only 75% of the normal indentation
+% Three level or greater nestings are very rare. I am guessing
+% that they don't use any indentation.
+\def\IEEElabelindentfactori{1.0} % almost always one
+\def\IEEElabelindentfactorii{0.75} % 0.0 or 1.0 may be used in some cases
+\def\IEEElabelindentfactoriii{0.0} % 0.75? 0.5? 0.0?
+\def\IEEElabelindentfactoriv{0.0}
+\def\IEEElabelindentfactorv{0.0}
+\def\IEEElabelindentfactorvi{0.0}
+
+% value actually used within IED lists, it is auto
+% set to one of the 6 values above
+% global changes here have no effect
+\def\IEEElabelindentfactor{1.0}
+
+% This controls the default spacing between the end of the IED
+% list labels and the list text, when normal text is used for
+% the labels.
+\newdimen\IEEEiednormlabelsep
+\IEEEiednormlabelsep 0.6em
+
+% This controls the default spacing between the end of the IED
+% list labels and the list text, when math symbols are used for
+% the labels (nomenclature lists). IEEE usually increases the
+% spacing in these cases
+\newdimen\IEEEiedmathlabelsep
+\IEEEiedmathlabelsep 1.2em
+
+% This controls the extra vertical separation put above and
+% below each IED list. IEEE usually puts a little extra spacing
+% around each list. However, this spacing is barely noticeable.
+\newskip\IEEEiedtopsep
+\IEEEiedtopsep 2pt plus 1pt minus 1pt
+
+
+% This command is executed within each IED list environment
+% at the beginning of the list. You can use this to set the
+% parameters for some/all your IED list(s) without disturbing
+% global parameters that affect things other than lists.
+% i.e., renewcommand{\IEEEiedlistdecl}{\setlength{\labelsep}{5em}}
+% will alter the \labelsep for the next list(s) until
+% \IEEEiedlistdecl is redefined.
+\def\IEEEiedlistdecl{\relax}
+
+% This command provides an easy way to set \leftmargin based
+% on the \labelwidth, \labelsep and the argument \IEEElabelindent
+% Usage: \IEEEcalcleftmargin{width-to-indent-the-label}
+% output is in the \leftmargin variable, i.e., effectively:
+% \leftmargin = argument + \labelwidth + \labelsep
+% Note controlled spacing here, shield end of lines with %
+\def\IEEEcalcleftmargin#1{\setlength{\leftmargin}{#1}%
+\addtolength{\leftmargin}{\labelwidth}%
+\addtolength{\leftmargin}{\labelsep}}
+
+% This command provides an easy way to set \labelwidth to the
+% width of the given text. It is the same as
+% \settowidth{\labelwidth}{label-text}
+% and useful as a shorter alternative.
+% Typically used to set \labelwidth to be the width
+% of the longest label in the list
+\def\IEEEsetlabelwidth#1{\settowidth{\labelwidth}{#1}}
+
+% When this command is executed, IED lists will use the
+% IEEEiedmathlabelsep label separation rather than the normal
+% spacing. To have an effect, this command must be executed via
+% the \IEEEiedlistdecl or within the option of the IED list
+% environments.
+\def\IEEEusemathlabelsep{\setlength{\labelsep}{\IEEEiedmathlabelsep}}
+
+% A flag which controls whether the IED lists automatically
+% calculate \leftmargin from \IEEElabelindent, \labelwidth and \labelsep
+% Useful if you want to specify your own \leftmargin
+% This flag must be set (\IEEEnocalcleftmargintrue or \IEEEnocalcleftmarginfalse)
+% via the \IEEEiedlistdecl or within the option of the IED list
+% environments to have an effect.
+\newif\ifIEEEnocalcleftmargin
+\IEEEnocalcleftmarginfalse
+
+% A flag which controls whether \IEEElabelindent is multiplied by
+% the \IEEElabelindentfactor for each list level.
+% This flag must be set via the \IEEEiedlistdecl or within the option
+% of the IED list environments to have an effect.
+\newif\ifIEEEnolabelindentfactor
+\IEEEnolabelindentfactorfalse
+
+
+% internal variable to indicate type of IED label
+% justification
+% 0 - left; 1 - center; 2 - right
+\def\@IEEEiedjustify{0}
+
+
+% commands to allow the user to control IED
+% label justifications. Use these commands within
+% the IED environment option or in the \IEEEiedlistdecl
+% Note that changing the normal list justifications
+% is nonstandard and IEEE may not like it if you do so!
+% I include these commands as they may be helpful to
+% those who are using these enhanced list controls for
+% other non-IEEE related LaTeX work.
+% itemize and enumerate automatically default to right
+% justification, description defaults to left.
+\def\IEEEiedlabeljustifyl{\def\@IEEEiedjustify{0}}%left
+\def\IEEEiedlabeljustifyc{\def\@IEEEiedjustify{1}}%center
+\def\IEEEiedlabeljustifyr{\def\@IEEEiedjustify{2}}%right
+
+
+
+
+% commands to save to and restore from the list parameter copies
+% this allows us to set all the list parameters within
+% the list_decl and prevent \list (and its \@list)
+% from overriding any of our parameters
+% V1.6 use \edefs instead of dimen's to conserve dimen registers
+% Note controlled spacing here, shield end of lines with %
+\def\@IEEEsavelistparams{\edef\@IEEEiedtopsep{\the\topsep}%
+\edef\@IEEEiedlabelwidth{\the\labelwidth}%
+\edef\@IEEEiedlabelsep{\the\labelsep}%
+\edef\@IEEEiedleftmargin{\the\leftmargin}%
+\edef\@IEEEiedpartopsep{\the\partopsep}%
+\edef\@IEEEiedparsep{\the\parsep}%
+\edef\@IEEEieditemsep{\the\itemsep}%
+\edef\@IEEEiedrightmargin{\the\rightmargin}%
+\edef\@IEEEiedlistparindent{\the\listparindent}%
+\edef\@IEEEieditemindent{\the\itemindent}}
+
+% Note controlled spacing here
+\def\@IEEErestorelistparams{\topsep\@IEEEiedtopsep\relax%
+\labelwidth\@IEEEiedlabelwidth\relax%
+\labelsep\@IEEEiedlabelsep\relax%
+\leftmargin\@IEEEiedleftmargin\relax%
+\partopsep\@IEEEiedpartopsep\relax%
+\parsep\@IEEEiedparsep\relax%
+\itemsep\@IEEEieditemsep\relax%
+\rightmargin\@IEEEiedrightmargin\relax%
+\listparindent\@IEEEiedlistparindent\relax%
+\itemindent\@IEEEieditemindent\relax}
+
+
+% v1.6b provide original LaTeX IED list environments
+% note that latex.ltx defines \itemize and \enumerate, but not \description
+% which must be created by the base classes
+% save original LaTeX itemize and enumerate
+\let\LaTeXitemize\itemize
+\let\endLaTeXitemize\enditemize
+\let\LaTeXenumerate\enumerate
+\let\endLaTeXenumerate\endenumerate
+
+% provide original LaTeX description environment from article.cls
+\newenvironment{LaTeXdescription}
+ {\list{}{\labelwidth\z@ \itemindent-\leftmargin
+ \let\makelabel\descriptionlabel}}
+ {\endlist}
+\newcommand*\descriptionlabel[1]{\hspace\labelsep
+ \normalfont\bfseries #1}
+
+
+% override LaTeX's default IED lists
+\def\itemize{\@IEEEitemize}
+\def\enditemize{\@endIEEEitemize}
+\def\enumerate{\@IEEEenumerate}
+\def\endenumerate{\@endIEEEenumerate}
+\def\description{\@IEEEdescription}
+\def\enddescription{\@endIEEEdescription}
+
+% provide the user with aliases - may help those using packages that
+% override itemize, enumerate, or description
+\def\IEEEitemize{\@IEEEitemize}
+\def\endIEEEitemize{\@endIEEEitemize}
+\def\IEEEenumerate{\@IEEEenumerate}
+\def\endIEEEenumerate{\@endIEEEenumerate}
+\def\IEEEdescription{\@IEEEdescription}
+\def\endIEEEdescription{\@endIEEEdescription}
+
+
+% V1.6 we want to keep the IEEEtran IED list definitions as our own internal
+% commands so they are protected against redefinition
+\def\@IEEEitemize{\@ifnextchar[{\@@IEEEitemize}{\@@IEEEitemize[\relax]}}
+\def\@IEEEenumerate{\@ifnextchar[{\@@IEEEenumerate}{\@@IEEEenumerate[\relax]}}
+\def\@IEEEdescription{\@ifnextchar[{\@@IEEEdescription}{\@@IEEEdescription[\relax]}}
+\def\@endIEEEitemize{\endlist}
+\def\@endIEEEenumerate{\endlist}
+\def\@endIEEEdescription{\endlist}
+
+
+% DO NOT ALLOW BLANK LINES TO BE IN THESE IED ENVIRONMENTS
+% AS THIS WILL FORCE NEW PARAGRAPHS AFTER THE IED LISTS
+% IEEEtran itemized list MDS 1/2001
+% Note controlled spacing here, shield end of lines with %
+\def\@@IEEEitemize[#1]{%
+ \ifnum\@itemdepth>3\relax\@toodeep\else%
+ \ifnum\@listdepth>5\relax\@toodeep\else%
+ \advance\@itemdepth\@ne%
+ \edef\@itemitem{labelitem\romannumeral\the\@itemdepth}%
+ % get the labelindentfactor for this level
+ \advance\@listdepth\@ne% we need to know what the level WILL be
+ \edef\IEEElabelindentfactor{\csname IEEElabelindentfactor\romannumeral\the\@listdepth\endcsname}%
+ \advance\@listdepth-\@ne% undo our increment
+ \def\@IEEEiedjustify{2}% right justified labels are default
+ % set other defaults
+ \IEEEnocalcleftmarginfalse%
+ \IEEEnolabelindentfactorfalse%
+ \topsep\IEEEiedtopsep%
+ \IEEElabelindent\IEEEilabelindent%
+ \labelsep\IEEEiednormlabelsep%
+ \partopsep 0ex%
+ \parsep 0ex%
+ \itemsep 0ex%
+ \rightmargin 0em%
+ \listparindent 0em%
+ \itemindent 0em%
+ % calculate the label width
+ % the user can override this later if
+ % they specified a \labelwidth
+ \settowidth{\labelwidth}{\csname labelitem\romannumeral\the\@itemdepth\endcsname}%
+ \@IEEEsavelistparams% save our list parameters
+ \list{\csname\@itemitem\endcsname}{%
+ \@IEEErestorelistparams% override any list{} changes
+ % to our globals
+ \let\makelabel\@IEEEiedmakelabel% v1.6b setup \makelabel
+ \IEEEiedlistdecl% let user alter parameters
+ #1\relax%
+ % If the user has requested not to use the
+ % labelindent factor, don't revise \labelindent
+ \ifIEEEnolabelindentfactor\relax%
+ \else\IEEElabelindent=\IEEElabelindentfactor\labelindent%
+ \fi%
+ % Unless the user has requested otherwise,
+ % calculate our left margin based
+ % on \IEEElabelindent, \labelwidth and
+ % \labelsep
+ \ifIEEEnocalcleftmargin\relax%
+ \else\IEEEcalcleftmargin{\IEEElabelindent}%
+ \fi}\fi\fi}%
+
+
+% DO NOT ALLOW BLANK LINES TO BE IN THESE IED ENVIRONMENTS
+% AS THIS WILL FORCE NEW PARAGRAPHS AFTER THE IED LISTS
+% IEEEtran enumerate list MDS 1/2001
+% Note controlled spacing here, shield end of lines with %
+\def\@@IEEEenumerate[#1]{%
+ \ifnum\@enumdepth>3\relax\@toodeep\else%
+ \ifnum\@listdepth>5\relax\@toodeep\else%
+ \advance\@enumdepth\@ne%
+ \edef\@enumctr{enum\romannumeral\the\@enumdepth}%
+ % get the labelindentfactor for this level
+ \advance\@listdepth\@ne% we need to know what the level WILL be
+ \edef\IEEElabelindentfactor{\csname IEEElabelindentfactor\romannumeral\the\@listdepth\endcsname}%
+ \advance\@listdepth-\@ne% undo our increment
+ \def\@IEEEiedjustify{2}% right justified labels are default
+ % set other defaults
+ \IEEEnocalcleftmarginfalse%
+ \IEEEnolabelindentfactorfalse%
+ \topsep\IEEEiedtopsep%
+ \IEEElabelindent\IEEEelabelindent%
+ \labelsep\IEEEiednormlabelsep%
+ \partopsep 0ex%
+ \parsep 0ex%
+ \itemsep 0ex%
+ \rightmargin 0em%
+ \listparindent 0em%
+ \itemindent 0em%
+ % calculate the label width
+ % We'll set it to the width suitable for all labels using
+ % normalfont 1) to 9)
+ % The user can override this later
+ \settowidth{\labelwidth}{9)}%
+ \@IEEEsavelistparams% save our list parameters
+ \list{\csname label\@enumctr\endcsname}{\usecounter{\@enumctr}%
+ \@IEEErestorelistparams% override any list{} changes
+ % to our globals
+ \let\makelabel\@IEEEiedmakelabel% v1.6b setup \makelabel
+ \IEEEiedlistdecl% let user alter parameters
+ #1\relax%
+ % If the user has requested not to use the
+ % IEEElabelindent factor, don't revise \IEEElabelindent
+ \ifIEEEnolabelindentfactor\relax%
+ \else\IEEElabelindent=\IEEElabelindentfactor\IEEElabelindent%
+ \fi%
+ % Unless the user has requested otherwise,
+ % calculate our left margin based
+ % on \IEEElabelindent, \labelwidth and
+ % \labelsep
+ \ifIEEEnocalcleftmargin\relax%
+ \else\IEEEcalcleftmargin{\IEEElabelindent}%
+ \fi}\fi\fi}%
+
+
+% DO NOT ALLOW BLANK LINES TO BE IN THESE IED ENVIRONMENTS
+% AS THIS WILL FORCE NEW PARAGRAPHS AFTER THE IED LISTS
+% IEEEtran description list MDS 1/2001
+% Note controlled spacing here, shield end of lines with %
+\def\@@IEEEdescription[#1]{%
+ \ifnum\@listdepth>5\relax\@toodeep\else%
+ % get the labelindentfactor for this level
+ \advance\@listdepth\@ne% we need to know what the level WILL be
+ \edef\IEEElabelindentfactor{\csname IEEElabelindentfactor\romannumeral\the\@listdepth\endcsname}%
+ \advance\@listdepth-\@ne% undo our increment
+ \def\@IEEEiedjustify{0}% left justified labels are default
+ % set other defaults
+ \IEEEnocalcleftmarginfalse%
+ \IEEEnolabelindentfactorfalse%
+ \topsep\IEEEiedtopsep%
+ \IEEElabelindent\IEEEdlabelindent%
+ % assume normal labelsep
+ \labelsep\IEEEiednormlabelsep%
+ \partopsep 0ex%
+ \parsep 0ex%
+ \itemsep 0ex%
+ \rightmargin 0em%
+ \listparindent 0em%
+ \itemindent 0em%
+ % Bogus label width in case the user forgets
+ % to set it.
+ % TIP: If you want to see what a variable's width is you
+ % can use the TeX command \showthe\width-variable to
+ % display it on the screen during compilation
+ % (This might be helpful to know when you need to find out
+ % which label is the widest)
+ \settowidth{\labelwidth}{Hello}%
+ \@IEEEsavelistparams% save our list parameters
+ \list{}{\@IEEErestorelistparams% override any list{} changes
+ % to our globals
+ \let\makelabel\@IEEEiedmakelabel% v1.6b setup \makelabel
+ \IEEEiedlistdecl% let user alter parameters
+ #1\relax%
+ % If the user has requested not to use the
+ % labelindent factor, don't revise \IEEElabelindent
+ \ifIEEEnolabelindentfactor\relax%
+ \else\IEEElabelindent=\IEEElabelindentfactor\IEEElabelindent%
+ \fi%
+ % Unless the user has requested otherwise,
+ % calculate our left margin based
+ % on \IEEElabelindent, \labelwidth and
+ % \labelsep
+ \ifIEEEnocalcleftmargin\relax%
+ \else\IEEEcalcleftmargin{\IEEElabelindent}\relax%
+ \fi}\fi}
+
+% v1.6b we use one makelabel that does justification as needed.
+\def\@IEEEiedmakelabel#1{\relax\if\@IEEEiedjustify 0\relax
+\makebox[\labelwidth][l]{\normalfont #1}\else
+\if\@IEEEiedjustify 1\relax
+\makebox[\labelwidth][c]{\normalfont #1}\else
+\makebox[\labelwidth][r]{\normalfont #1}\fi\fi}
+
+
+% VERSE and QUOTE
+% V1.7 define environments with newenvironment
+\newenvironment{verse}{\let\\=\@centercr
+ \list{}{\itemsep\z@ \itemindent -1.5em \listparindent \itemindent
+ \rightmargin\leftmargin\advance\leftmargin 1.5em}\item\relax}
+ {\endlist}
+\newenvironment{quotation}{\list{}{\listparindent 1.5em \itemindent\listparindent
+ \rightmargin\leftmargin \parsep 0pt plus 1pt}\item\relax}
+ {\endlist}
+\newenvironment{quote}{\list{}{\rightmargin\leftmargin}\item\relax}
+ {\endlist}
+
+
+% \titlepage
+% provided only for backward compatibility. \maketitle is the correct
+% way to create the title page.
+\newif\if@restonecol
+\def\titlepage{\@restonecolfalse\if@twocolumn\@restonecoltrue\onecolumn
+ \else \newpage \fi \thispagestyle{empty}\c@page\z@}
+\def\endtitlepage{\if@restonecol\twocolumn \else \newpage \fi}
+
+% standard values from article.cls
+\arraycolsep 5pt
+\arrayrulewidth .4pt
+\doublerulesep 2pt
+
+\tabcolsep 6pt
+\tabbingsep 0.5em
+
+
+%% FOOTNOTES
+%
+%\skip\footins 10pt plus 4pt minus 2pt
+% V1.6 respond to changes in font size
+% space added above the footnotes (if present)
+\skip\footins 0.9\baselineskip plus 0.4\baselineskip minus 0.2\baselineskip
+
+% V1.6, we need to make \footnotesep responsive to changes
+% in \baselineskip or strange spacings will result when in
+% draft mode. Here is a little LaTeX secret - \footnotesep
+% determines the height of an invisible strut that is placed
+% *above* the baseline of footnotes after the first. Since
+% LaTeX considers the space for characters to be 0.7/baselineskip
+% above the baseline and 0.3/baselineskip below it, we need to
+% use 0.7/baselineskip as a \footnotesep to maintain equal spacing
+% between all the lines of the footnotes. IEEE often uses a tad
+% more, so use 0.8\baselineskip. This slightly larger value also helps
+% the text to clear the footnote marks. Note that \thanks in IEEEtran
+% uses its own value of \footnotesep which is set in \maketitle.
+{\footnotesize
+\global\footnotesep 0.8\baselineskip}
+
+
+\skip\@mpfootins = \skip\footins
+\fboxsep = 3pt
+\fboxrule = .4pt
+% V1.6 use 1em, then use LaTeX2e's \@makefnmark
+% Note that IEEE normally *left* aligns the footnote marks, so we don't need
+% box resizing tricks here.
+\long\def\@makefntext#1{\parindent 1em\indent\hbox{\@makefnmark}#1}% V1.6 use 1em
+% V1.7 compsoc does not use superscipts for footnote marks
+\ifCLASSOPTIONcompsoc
+\def\@IEEEcompsocmakefnmark{\hbox{\normalfont\@thefnmark.\ }}
+\long\def\@makefntext#1{\parindent 1em\indent\hbox{\@IEEEcompsocmakefnmark}#1}
+\fi
+
+% IEEE does not use footnote rules
+\def\footnoterule{}
+
+% V1.7 for compsoc, IEEE uses a footnote rule only for \thanks. We devise a "one-shot"
+% system to implement this.
+\newif\if@IEEEenableoneshotfootnoterule
+\@IEEEenableoneshotfootnoterulefalse
+\ifCLASSOPTIONcompsoc
+\def\footnoterule{\relax\if@IEEEenableoneshotfootnoterule
+\kern-5pt
+\hbox to \columnwidth{\hfill\vrule width 0.5\columnwidth height 0.4pt\hfill}
+\kern4.6pt
+\global\@IEEEenableoneshotfootnoterulefalse
+\else
+\relax
+\fi}
+\fi
+
+% V1.6 do not allow LaTeX to break a footnote across multiple pages
+\interfootnotelinepenalty=10000
+
+% V1.6 discourage breaks within equations
+% Note that amsmath normally sets this to 10000,
+% but LaTeX2e normally uses 100.
+\interdisplaylinepenalty=2500
+
+% default allows section depth up to /paragraph
+\setcounter{secnumdepth}{4}
+
+% technotes do not allow /paragraph
+\ifCLASSOPTIONtechnote
+ \setcounter{secnumdepth}{3}
+\fi
+% neither do compsoc conferences
+\@IEEEcompsocconfonly{\setcounter{secnumdepth}{3}}
+
+
+\newcounter{section}
+\newcounter{subsection}[section]
+\newcounter{subsubsection}[subsection]
+\newcounter{paragraph}[subsubsection]
+
+% used only by IEEEtran's IEEEeqnarray as other packages may
+% have their own, different, implementations
+\newcounter{IEEEsubequation}[equation]
+
+% as shown when called by user from \ref, \label and in table of contents
+\def\theequation{\arabic{equation}} % 1
+\def\theIEEEsubequation{\theequation\alph{IEEEsubequation}} % 1a (used only by IEEEtran's IEEEeqnarray)
+\ifCLASSOPTIONcompsoc
+% compsoc is all arabic
+\def\thesection{\arabic{section}}
+\def\thesubsection{\thesection.\arabic{subsection}}
+\def\thesubsubsection{\thesubsection.\arabic{subsubsection}}
+\def\theparagraph{\thesubsubsection.\arabic{paragraph}}
+\else
+\def\thesection{\Roman{section}} % I
+% V1.7, \mbox prevents breaks around -
+\def\thesubsection{\mbox{\thesection-\Alph{subsection}}} % I-A
+% V1.7 use I-A1 format used by IEEE rather than I-A.1
+\def\thesubsubsection{\thesubsection\arabic{subsubsection}} % I-A1
+\def\theparagraph{\thesubsubsection\alph{paragraph}} % I-A1a
+\fi
+
+% From Heiko Oberdiek. Because of the \mbox in \thesubsection, we need to
+% tell hyperref to disable the \mbox command when making PDF bookmarks.
+% This done already with hyperref.sty version 6.74o and later, but
+% it will not hurt to do it here again for users of older versions.
+\@ifundefined{pdfstringdefPreHook}{\let\pdfstringdefPreHook\@empty}{}%
+\g@addto@macro\pdfstringdefPreHook{\let\mbox\relax}
+
+
+% Main text forms (how shown in main text headings)
+% V1.6, using \thesection in \thesectiondis allows changes
+% in the former to automatically appear in the latter
+\ifCLASSOPTIONcompsoc
+ \ifCLASSOPTIONconference% compsoc conference
+ \def\thesectiondis{\thesection.}
+ \def\thesubsectiondis{\thesectiondis\arabic{subsection}.}
+ \def\thesubsubsectiondis{\thesubsectiondis\arabic{subsubsection}.}
+ \def\theparagraphdis{\thesubsubsectiondis\arabic{paragraph}.}
+ \else% compsoc not conferencs
+ \def\thesectiondis{\thesection}
+ \def\thesubsectiondis{\thesectiondis.\arabic{subsection}}
+ \def\thesubsubsectiondis{\thesubsectiondis.\arabic{subsubsection}}
+ \def\theparagraphdis{\thesubsubsectiondis.\arabic{paragraph}}
+ \fi
+\else% not compsoc
+ \def\thesectiondis{\thesection.} % I.
+ \def\thesubsectiondis{\Alph{subsection}.} % B.
+ \def\thesubsubsectiondis{\arabic{subsubsection})} % 3)
+ \def\theparagraphdis{\alph{paragraph})} % d)
+\fi
+
+% just like LaTeX2e's \@eqnnum
+\def\theequationdis{{\normalfont \normalcolor (\theequation)}}% (1)
+% IEEEsubequation used only by IEEEtran's IEEEeqnarray
+\def\theIEEEsubequationdis{{\normalfont \normalcolor (\theIEEEsubequation)}}% (1a)
+% redirect LaTeX2e's equation number display and all that depend on
+% it, through IEEEtran's \theequationdis
+\def\@eqnnum{\theequationdis}
+
+
+
+% V1.7 provide string macros as article.cls does
+\def\contentsname{Contents}
+\def\listfigurename{List of Figures}
+\def\listtablename{List of Tables}
+\def\refname{References}
+\def\indexname{Index}
+\def\figurename{Fig.}
+\def\tablename{TABLE}
+\@IEEEcompsocconfonly{\def\figurename{Figure}\def\tablename{Table}}
+\def\partname{Part}
+\def\appendixname{Appendix}
+\def\abstractname{Abstract}
+% IEEE specific names
+\def\IEEEkeywordsname{Index Terms}
+\def\IEEEproofname{Proof}
+
+
+% LIST OF FIGURES AND TABLES AND TABLE OF CONTENTS
+%
+\def\@pnumwidth{1.55em}
+\def\@tocrmarg{2.55em}
+\def\@dotsep{4.5}
+\setcounter{tocdepth}{3}
+
+% adjusted some spacings here so that section numbers will not easily
+% collide with the section titles.
+% VIII; VIII-A; and VIII-A.1 are usually the worst offenders.
+% MDS 1/2001
+\def\tableofcontents{\section*{\contentsname}\@starttoc{toc}}
+\def\l@section#1#2{\addpenalty{\@secpenalty}\addvspace{1.0em plus 1pt}%
+ \@tempdima 2.75em \begingroup \parindent \z@ \rightskip \@pnumwidth%
+ \parfillskip-\@pnumwidth {\bfseries\leavevmode #1}\hfil\hbox to\@pnumwidth{\hss #2}\par%
+ \endgroup}
+% argument format #1:level, #2:labelindent,#3:labelsep
+\def\l@subsection{\@dottedtocline{2}{2.75em}{3.75em}}
+\def\l@subsubsection{\@dottedtocline{3}{6.5em}{4.5em}}
+% must provide \l@ defs for ALL sublevels EVEN if tocdepth
+% is such as they will not appear in the table of contents
+% these defs are how TOC knows what level these things are!
+\def\l@paragraph{\@dottedtocline{4}{6.5em}{5.5em}}
+\def\l@subparagraph{\@dottedtocline{5}{6.5em}{6.5em}}
+\def\listoffigures{\section*{\listfigurename}\@starttoc{lof}}
+\def\l@figure{\@dottedtocline{1}{0em}{2.75em}}
+\def\listoftables{\section*{\listtablename}\@starttoc{lot}}
+\let\l@table\l@figure
+
+
+%% Definitions for floats
+%%
+%% Normal Floats
+\floatsep 1\baselineskip plus 0.2\baselineskip minus 0.2\baselineskip
+\textfloatsep 1.7\baselineskip plus 0.2\baselineskip minus 0.4\baselineskip
+\@fptop 0pt plus 1fil
+\@fpsep 0.75\baselineskip plus 2fil
+\@fpbot 0pt plus 1fil
+\def\topfraction{0.9}
+\def\bottomfraction{0.4}
+\def\floatpagefraction{0.8}
+% V1.7, let top floats approach 90% of page
+\def\textfraction{0.1}
+
+%% Double Column Floats
+\dblfloatsep 1\baselineskip plus 0.2\baselineskip minus 0.2\baselineskip
+
+\dbltextfloatsep 1.7\baselineskip plus 0.2\baselineskip minus 0.4\baselineskip
+% Note that it would be nice if the rubber here actually worked in LaTeX2e.
+% There is a long standing limitation in LaTeX, first discovered (to the best
+% of my knowledge) by Alan Jeffrey in 1992. LaTeX ignores the stretchable
+% portion of \dbltextfloatsep, and as a result, double column figures can and
+% do result in an non-integer number of lines in the main text columns with
+% underfull vbox errors as a consequence. A post to comp.text.tex
+% by Donald Arseneau confirms that this had not yet been fixed in 1998.
+% IEEEtran V1.6 will fix this problem for you in the titles, but it doesn't
+% protect you from other double floats. Happy vspace'ing.
+
+\@dblfptop 0pt plus 1fil
+\@dblfpsep 0.75\baselineskip plus 2fil
+\@dblfpbot 0pt plus 1fil
+\def\dbltopfraction{0.8}
+\def\dblfloatpagefraction{0.8}
+\setcounter{dbltopnumber}{4}
+
+\intextsep 1\baselineskip plus 0.2\baselineskip minus 0.2\baselineskip
+\setcounter{topnumber}{2}
+\setcounter{bottomnumber}{2}
+\setcounter{totalnumber}{4}
+
+
+
+% article class provides these, we should too.
+\newlength\abovecaptionskip
+\newlength\belowcaptionskip
+% but only \abovecaptionskip is used above figure captions and *below* table
+% captions
+\setlength\abovecaptionskip{0.5\baselineskip}
+\setlength\belowcaptionskip{0pt}
+% V1.6 create hooks in case the caption spacing ever needs to be
+% overridden by a user
+\def\@IEEEfigurecaptionsepspace{\vskip\abovecaptionskip\relax}%
+\def\@IEEEtablecaptionsepspace{\vskip\abovecaptionskip\relax}%
+
+
+% 1.6b revise caption system so that \@makecaption uses two arguments
+% as with LaTeX2e. Otherwise, there will be problems when using hyperref.
+\def\@IEEEtablestring{table}
+
+\ifCLASSOPTIONcompsoc
+% V1.7 compsoc \@makecaption
+\ifCLASSOPTIONconference% compsoc conference
+\long\def\@makecaption#1#2{%
+% test if is a for a figure or table
+\ifx\@captype\@IEEEtablestring%
+% if a table, do table caption
+\normalsize\begin{center}{\normalfont\sffamily\normalsize {#1.}~ #2}\end{center}%
+\@IEEEtablecaptionsepspace
+% if not a table, format it as a figure
+\else
+\@IEEEfigurecaptionsepspace
+\setbox\@tempboxa\hbox{\normalfont\sffamily\normalsize {#1.}~ #2}%
+\ifdim \wd\@tempboxa >\hsize%
+% if caption is longer than a line, let it wrap around
+\setbox\@tempboxa\hbox{\normalfont\sffamily\normalsize {#1.}~ }%
+\parbox[t]{\hsize}{\normalfont\sffamily\normalsize \noindent\unhbox\@tempboxa#2}%
+% if caption is shorter than a line, center
+\else%
+\hbox to\hsize{\normalfont\sffamily\normalsize\hfil\box\@tempboxa\hfil}%
+\fi\fi}
+\else% nonconference compsoc
+\long\def\@makecaption#1#2{%
+% test if is a for a figure or table
+\ifx\@captype\@IEEEtablestring%
+% if a table, do table caption
+\normalsize\begin{center}{\normalfont\sffamily\normalsize #1}\\{\normalfont\sffamily\normalsize #2}\end{center}%
+\@IEEEtablecaptionsepspace
+% if not a table, format it as a figure
+\else
+\@IEEEfigurecaptionsepspace
+\setbox\@tempboxa\hbox{\normalfont\sffamily\normalsize {#1.}~ #2}%
+\ifdim \wd\@tempboxa >\hsize%
+% if caption is longer than a line, let it wrap around
+\setbox\@tempboxa\hbox{\normalfont\sffamily\normalsize {#1.}~ }%
+\parbox[t]{\hsize}{\normalfont\sffamily\normalsize \noindent\unhbox\@tempboxa#2}%
+% if caption is shorter than a line, left justify
+\else%
+\hbox to\hsize{\normalfont\sffamily\normalsize\box\@tempboxa\hfil}%
+\fi\fi}
+\fi
+
+\else% traditional noncompsoc \@makecaption
+\long\def\@makecaption#1#2{%
+% test if is a for a figure or table
+\ifx\@captype\@IEEEtablestring%
+% if a table, do table caption
+\footnotesize\begin{center}{\normalfont\footnotesize #1}\\{\normalfont\footnotesize\scshape #2}\end{center}%
+\@IEEEtablecaptionsepspace
+% if not a table, format it as a figure
+\else
+\@IEEEfigurecaptionsepspace
+% 3/2001 use footnotesize, not small; use two nonbreaking spaces, not one
+\setbox\@tempboxa\hbox{\normalfont\footnotesize {#1.}~~ #2}%
+\ifdim \wd\@tempboxa >\hsize%
+% if caption is longer than a line, let it wrap around
+\setbox\@tempboxa\hbox{\normalfont\footnotesize {#1.}~~ }%
+\parbox[t]{\hsize}{\normalfont\footnotesize\noindent\unhbox\@tempboxa#2}%
+% if caption is shorter than a line, center if conference, left justify otherwise
+\else%
+\ifCLASSOPTIONconference \hbox to\hsize{\normalfont\footnotesize\hfil\box\@tempboxa\hfil}%
+\else \hbox to\hsize{\normalfont\footnotesize\box\@tempboxa\hfil}%
+\fi\fi\fi}
+\fi
+
+
+
+% V1.7 disable captions class option, do so in a way that retains operation of \label
+% within \caption
+\ifCLASSOPTIONcaptionsoff
+\long\def\@makecaption#1#2{\vspace*{2em}\footnotesize\begin{center}{\footnotesize #1}\end{center}%
+\let\@IEEEtemporiglabeldefsave\label
+\let\@IEEEtemplabelargsave\relax
+\def\label##1{\gdef\@IEEEtemplabelargsave{##1}}%
+\setbox\@tempboxa\hbox{#2}%
+\let\label\@IEEEtemporiglabeldefsave
+\ifx\@IEEEtemplabelargsave\relax\else\label{\@IEEEtemplabelargsave}\fi}
+\fi
+
+
+% V1.7 define end environments with \def not \let so as to work OK with
+% preview-latex
+\newcounter{figure}
+\def\thefigure{\@arabic\c@figure}
+\def\fps@figure{tbp}
+\def\ftype@figure{1}
+\def\ext@figure{lof}
+\def\fnum@figure{\figurename~\thefigure}
+\def\figure{\@float{figure}}
+\def\endfigure{\end@float}
+\@namedef{figure*}{\@dblfloat{figure}}
+\@namedef{endfigure*}{\end@dblfloat}
+\newcounter{table}
+\ifCLASSOPTIONcompsoc
+\def\thetable{\arabic{table}}
+\else
+\def\thetable{\@Roman\c@table}
+\fi
+\def\fps@table{tbp}
+\def\ftype@table{2}
+\def\ext@table{lot}
+\def\fnum@table{\tablename~\thetable}
+% V1.6 IEEE uses 8pt text for tables
+% to default to footnotesize, we hack into LaTeX2e's \@floatboxreset and pray
+\def\table{\def\@floatboxreset{\reset@font\footnotesize\@setminipage}\@float{table}}
+\def\endtable{\end@float}
+% v1.6b double column tables need to default to footnotesize as well.
+\@namedef{table*}{\def\@floatboxreset{\reset@font\footnotesize\@setminipage}\@dblfloat{table}}
+\@namedef{endtable*}{\end@dblfloat}
+
+
+
+
+%%
+%% START OF IEEEeqnarry DEFINITIONS
+%%
+%% Inspired by the concepts, examples, and previous works of LaTeX
+%% coders and developers such as Donald Arseneau, Fred Bartlett,
+%% David Carlisle, Tony Liu, Frank Mittelbach, Piet van Oostrum,
+%% Roland Winkler and Mark Wooding.
+%% I don't make the claim that my work here is even near their calibre. ;)
+
+
+% hook to allow easy changeover to IEEEtran.cls/tools.sty error reporting
+\def\@IEEEclspkgerror{\ClassError{IEEEtran}}
+
+\newif\if@IEEEeqnarraystarform% flag to indicate if the environment was called as the star form
+\@IEEEeqnarraystarformfalse
+
+\newif\if@advanceIEEEeqncolcnt% tracks if the environment should advance the col counter
+% allows a way to make an \IEEEeqnarraybox that can be used within an \IEEEeqnarray
+% used by IEEEeqnarraymulticol so that it can work properly in both
+\@advanceIEEEeqncolcnttrue
+
+\newcount\@IEEEeqnnumcols % tracks how many IEEEeqnarray cols are defined
+\newcount\@IEEEeqncolcnt % tracks how many IEEEeqnarray cols the user actually used
+
+
+% The default math style used by the columns
+\def\IEEEeqnarraymathstyle{\displaystyle}
+% The default text style used by the columns
+% default to using the current font
+\def\IEEEeqnarraytextstyle{\relax}
+
+% like the iedlistdecl but for \IEEEeqnarray
+\def\IEEEeqnarraydecl{\relax}
+\def\IEEEeqnarrayboxdecl{\relax}
+
+% \yesnumber is the opposite of \nonumber
+% a novel concept with the same def as the equationarray package
+% However, we give IEEE versions too since some LaTeX packages such as
+% the MDWtools mathenv.sty redefine \nonumber to something else.
+\providecommand{\yesnumber}{\global\@eqnswtrue}
+\def\IEEEyesnumber{\global\@eqnswtrue}
+\def\IEEEnonumber{\global\@eqnswfalse}
+
+
+\def\IEEEyessubnumber{\global\@IEEEissubequationtrue\global\@eqnswtrue%
+\if@IEEEeqnarrayISinner% only do something inside an IEEEeqnarray
+\if@IEEElastlinewassubequation\addtocounter{equation}{-1}\else\setcounter{IEEEsubequation}{1}\fi%
+\def\@currentlabel{\p@IEEEsubequation\theIEEEsubequation}\fi}
+
+% flag to indicate that an equation is a sub equation
+\newif\if@IEEEissubequation%
+\@IEEEissubequationfalse
+
+% allows users to "push away" equations that get too close to the equation numbers
+\def\IEEEeqnarraynumspace{\hphantom{\if@IEEEissubequation\theIEEEsubequationdis\else\theequationdis\fi}}
+
+% provides a way to span multiple columns within IEEEeqnarray environments
+% will consider \if@advanceIEEEeqncolcnt before globally advancing the
+% column counter - so as to work within \IEEEeqnarraybox
+% usage: \IEEEeqnarraymulticol{number cols. to span}{col type}{cell text}
+\long\def\IEEEeqnarraymulticol#1#2#3{\multispan{#1}%
+% check if column is defined
+\relax\expandafter\ifx\csname @IEEEeqnarraycolDEF#2\endcsname\@IEEEeqnarraycolisdefined%
+\csname @IEEEeqnarraycolPRE#2\endcsname#3\relax\relax\relax\relax\relax%
+\relax\relax\relax\relax\relax\csname @IEEEeqnarraycolPOST#2\endcsname%
+\else% if not, error and use default type
+\@IEEEclspkgerror{Invalid column type "#2" in \string\IEEEeqnarraymulticol.\MessageBreak
+Using a default centering column instead}%
+{You must define IEEEeqnarray column types before use.}%
+\csname @IEEEeqnarraycolPRE@IEEEdefault\endcsname#3\relax\relax\relax\relax\relax%
+\relax\relax\relax\relax\relax\csname @IEEEeqnarraycolPOST@IEEEdefault\endcsname%
+\fi%
+% advance column counter only if the IEEEeqnarray environment wants it
+\if@advanceIEEEeqncolcnt\global\advance\@IEEEeqncolcnt by #1\relax\fi}
+
+% like \omit, but maintains track of the column counter for \IEEEeqnarray
+\def\IEEEeqnarrayomit{\omit\if@advanceIEEEeqncolcnt\global\advance\@IEEEeqncolcnt by 1\relax\fi}
+
+
+% provides a way to define a letter referenced column type
+% usage: \IEEEeqnarraydefcol{col. type letter/name}{pre insertion text}{post insertion text}
+\def\IEEEeqnarraydefcol#1#2#3{\expandafter\def\csname @IEEEeqnarraycolPRE#1\endcsname{#2}%
+\expandafter\def\csname @IEEEeqnarraycolPOST#1\endcsname{#3}%
+\expandafter\def\csname @IEEEeqnarraycolDEF#1\endcsname{1}}
+
+
+% provides a way to define a numerically referenced inter-column glue types
+% usage: \IEEEeqnarraydefcolsep{col. glue number}{glue definition}
+\def\IEEEeqnarraydefcolsep#1#2{\expandafter\def\csname @IEEEeqnarraycolSEP\romannumeral #1\endcsname{#2}%
+\expandafter\def\csname @IEEEeqnarraycolSEPDEF\romannumeral #1\endcsname{1}}
+
+
+\def\@IEEEeqnarraycolisdefined{1}% just a macro for 1, used for checking undefined column types
+
+
+% expands and appends the given argument to the \@IEEEtrantmptoksA token list
+% used to build up the \halign preamble
+\def\@IEEEappendtoksA#1{\edef\@@IEEEappendtoksA{\@IEEEtrantmptoksA={\the\@IEEEtrantmptoksA #1}}%
+\@@IEEEappendtoksA}
+
+% also appends to \@IEEEtrantmptoksA, but does not expand the argument
+% uses \toks8 as a scratchpad register
+\def\@IEEEappendNOEXPANDtoksA#1{\toks8={#1}%
+\edef\@@IEEEappendNOEXPANDtoksA{\@IEEEtrantmptoksA={\the\@IEEEtrantmptoksA\the\toks8}}%
+\@@IEEEappendNOEXPANDtoksA}
+
+% define some common column types for the user
+% math
+\IEEEeqnarraydefcol{l}{$\IEEEeqnarraymathstyle}{$\hfil}
+\IEEEeqnarraydefcol{c}{\hfil$\IEEEeqnarraymathstyle}{$\hfil}
+\IEEEeqnarraydefcol{r}{\hfil$\IEEEeqnarraymathstyle}{$}
+\IEEEeqnarraydefcol{L}{$\IEEEeqnarraymathstyle{}}{{}$\hfil}
+\IEEEeqnarraydefcol{C}{\hfil$\IEEEeqnarraymathstyle{}}{{}$\hfil}
+\IEEEeqnarraydefcol{R}{\hfil$\IEEEeqnarraymathstyle{}}{{}$}
+% text
+\IEEEeqnarraydefcol{s}{\IEEEeqnarraytextstyle}{\hfil}
+\IEEEeqnarraydefcol{t}{\hfil\IEEEeqnarraytextstyle}{\hfil}
+\IEEEeqnarraydefcol{u}{\hfil\IEEEeqnarraytextstyle}{}
+
+% vertical rules
+\IEEEeqnarraydefcol{v}{}{\vrule width\arrayrulewidth}
+\IEEEeqnarraydefcol{vv}{\vrule width\arrayrulewidth\hfil}{\hfil\vrule width\arrayrulewidth}
+\IEEEeqnarraydefcol{V}{}{\vrule width\arrayrulewidth\hskip\doublerulesep\vrule width\arrayrulewidth}
+\IEEEeqnarraydefcol{VV}{\vrule width\arrayrulewidth\hskip\doublerulesep\vrule width\arrayrulewidth\hfil}%
+{\hfil\vrule width\arrayrulewidth\hskip\doublerulesep\vrule width\arrayrulewidth}
+
+% horizontal rules
+\IEEEeqnarraydefcol{h}{}{\leaders\hrule height\arrayrulewidth\hfil}
+\IEEEeqnarraydefcol{H}{}{\leaders\vbox{\hrule width\arrayrulewidth\vskip\doublerulesep\hrule width\arrayrulewidth}\hfil}
+
+% plain
+\IEEEeqnarraydefcol{x}{}{}
+\IEEEeqnarraydefcol{X}{$}{$}
+
+% the default column type to use in the event a column type is not defined
+\IEEEeqnarraydefcol{@IEEEdefault}{\hfil$\IEEEeqnarraymathstyle}{$\hfil}
+
+
+% a zero tabskip (used for "-" col types)
+\def\@IEEEeqnarraycolSEPzero{0pt plus 0pt minus 0pt}
+% a centering tabskip (used for "+" col types)
+\def\@IEEEeqnarraycolSEPcenter{1000pt plus 0pt minus 1000pt}
+
+% top level default tabskip glues for the start, end, and inter-column
+% may be reset within environments not always at the top level, e.g., \IEEEeqnarraybox
+\edef\@IEEEeqnarraycolSEPdefaultstart{\@IEEEeqnarraycolSEPcenter}% default start glue
+\edef\@IEEEeqnarraycolSEPdefaultend{\@IEEEeqnarraycolSEPcenter}% default end glue
+\edef\@IEEEeqnarraycolSEPdefaultmid{\@IEEEeqnarraycolSEPzero}% default inter-column glue
+
+
+
+% creates a vertical rule that extends from the bottom to the top a a cell
+% Provided in case other packages redefine \vline some other way.
+% usage: \IEEEeqnarrayvrule[rule thickness]
+% If no argument is provided, \arrayrulewidth will be used for the rule thickness.
+\newcommand\IEEEeqnarrayvrule[1][\arrayrulewidth]{\vrule\@width#1\relax}
+
+% creates a blank separator row
+% usage: \IEEEeqnarrayseprow[separation length][font size commands]
+% default is \IEEEeqnarrayseprow[0.25\normalbaselineskip][\relax]
+% blank arguments inherit the default values
+% uses \skip5 as a scratch register - calls \@IEEEeqnarraystrutsize which uses more scratch registers
+\def\IEEEeqnarrayseprow{\relax\@ifnextchar[{\@IEEEeqnarrayseprow}{\@IEEEeqnarrayseprow[0.25\normalbaselineskip]}}
+\def\@IEEEeqnarrayseprow[#1]{\relax\@ifnextchar[{\@@IEEEeqnarrayseprow[#1]}{\@@IEEEeqnarrayseprow[#1][\relax]}}
+\def\@@IEEEeqnarrayseprow[#1][#2]{\def\@IEEEeqnarrayseprowARGONE{#1}%
+\ifx\@IEEEeqnarrayseprowARGONE\@empty%
+% get the skip value, based on the font commands
+% use skip5 because \IEEEeqnarraystrutsize uses \skip0, \skip2, \skip3
+% assign within a bogus box to confine the font changes
+{\setbox0=\hbox{#2\relax\global\skip5=0.25\normalbaselineskip}}%
+\else%
+{\setbox0=\hbox{#2\relax\global\skip5=#1}}%
+\fi%
+\@IEEEeqnarrayhoptolastcolumn\IEEEeqnarraystrutsize{\skip5}{0pt}[\relax]\relax}
+
+% creates a blank separator row, but omits all the column templates
+% usage: \IEEEeqnarrayseprowcut[separation length][font size commands]
+% default is \IEEEeqnarrayseprowcut[0.25\normalbaselineskip][\relax]
+% blank arguments inherit the default values
+% uses \skip5 as a scratch register - calls \@IEEEeqnarraystrutsize which uses more scratch registers
+\def\IEEEeqnarrayseprowcut{\multispan{\@IEEEeqnnumcols}\relax% span all the cols
+% advance column counter only if the IEEEeqnarray environment wants it
+\if@advanceIEEEeqncolcnt\global\advance\@IEEEeqncolcnt by \@IEEEeqnnumcols\relax\fi%
+\@ifnextchar[{\@IEEEeqnarrayseprowcut}{\@IEEEeqnarrayseprowcut[0.25\normalbaselineskip]}}
+\def\@IEEEeqnarrayseprowcut[#1]{\relax\@ifnextchar[{\@@IEEEeqnarrayseprowcut[#1]}{\@@IEEEeqnarrayseprowcut[#1][\relax]}}
+\def\@@IEEEeqnarrayseprowcut[#1][#2]{\def\@IEEEeqnarrayseprowARGONE{#1}%
+\ifx\@IEEEeqnarrayseprowARGONE\@empty%
+% get the skip value, based on the font commands
+% use skip5 because \IEEEeqnarraystrutsize uses \skip0, \skip2, \skip3
+% assign within a bogus box to confine the font changes
+{\setbox0=\hbox{#2\relax\global\skip5=0.25\normalbaselineskip}}%
+\else%
+{\setbox0=\hbox{#2\relax\global\skip5=#1}}%
+\fi%
+\IEEEeqnarraystrutsize{\skip5}{0pt}[\relax]\relax}
+
+
+
+% draws a single rule across all the columns optional
+% argument determines the rule width, \arrayrulewidth is the default
+% updates column counter as needed and turns off struts
+% usage: \IEEEeqnarrayrulerow[rule line thickness]
+\def\IEEEeqnarrayrulerow{\multispan{\@IEEEeqnnumcols}\relax% span all the cols
+% advance column counter only if the IEEEeqnarray environment wants it
+\if@advanceIEEEeqncolcnt\global\advance\@IEEEeqncolcnt by \@IEEEeqnnumcols\relax\fi%
+\@ifnextchar[{\@IEEEeqnarrayrulerow}{\@IEEEeqnarrayrulerow[\arrayrulewidth]}}
+\def\@IEEEeqnarrayrulerow[#1]{\leaders\hrule height#1\hfil\relax% put in our rule
+% turn off any struts
+\IEEEeqnarraystrutsize{0pt}{0pt}[\relax]\relax}
+
+
+% draws a double rule by using a single rule row, a separator row, and then
+% another single rule row
+% first optional argument determines the rule thicknesses, \arrayrulewidth is the default
+% second optional argument determines the rule spacing, \doublerulesep is the default
+% usage: \IEEEeqnarraydblrulerow[rule line thickness][rule spacing]
+\def\IEEEeqnarraydblrulerow{\multispan{\@IEEEeqnnumcols}\relax% span all the cols
+% advance column counter only if the IEEEeqnarray environment wants it
+\if@advanceIEEEeqncolcnt\global\advance\@IEEEeqncolcnt by \@IEEEeqnnumcols\relax\fi%
+\@ifnextchar[{\@IEEEeqnarraydblrulerow}{\@IEEEeqnarraydblrulerow[\arrayrulewidth]}}
+\def\@IEEEeqnarraydblrulerow[#1]{\relax\@ifnextchar[{\@@IEEEeqnarraydblrulerow[#1]}%
+{\@@IEEEeqnarraydblrulerow[#1][\doublerulesep]}}
+\def\@@IEEEeqnarraydblrulerow[#1][#2]{\def\@IEEEeqnarraydblrulerowARG{#1}%
+% we allow the user to say \IEEEeqnarraydblrulerow[][]
+\ifx\@IEEEeqnarraydblrulerowARG\@empty%
+\@IEEEeqnarrayrulerow[\arrayrulewidth]%
+\else%
+\@IEEEeqnarrayrulerow[#1]\relax%
+\fi%
+\def\@IEEEeqnarraydblrulerowARG{#2}%
+\ifx\@IEEEeqnarraydblrulerowARG\@empty%
+\\\IEEEeqnarrayseprow[\doublerulesep][\relax]%
+\else%
+\\\IEEEeqnarrayseprow[#2][\relax]%
+\fi%
+\\\multispan{\@IEEEeqnnumcols}%
+% advance column counter only if the IEEEeqnarray environment wants it
+\if@advanceIEEEeqncolcnt\global\advance\@IEEEeqncolcnt by \@IEEEeqnnumcols\relax\fi%
+\def\@IEEEeqnarraydblrulerowARG{#1}%
+\ifx\@IEEEeqnarraydblrulerowARG\@empty%
+\@IEEEeqnarrayrulerow[\arrayrulewidth]%
+\else%
+\@IEEEeqnarrayrulerow[#1]%
+\fi%
+}
+
+% draws a double rule by using a single rule row, a separator (cutting) row, and then
+% another single rule row
+% first optional argument determines the rule thicknesses, \arrayrulewidth is the default
+% second optional argument determines the rule spacing, \doublerulesep is the default
+% usage: \IEEEeqnarraydblrulerow[rule line thickness][rule spacing]
+\def\IEEEeqnarraydblrulerowcut{\multispan{\@IEEEeqnnumcols}\relax% span all the cols
+% advance column counter only if the IEEEeqnarray environment wants it
+\if@advanceIEEEeqncolcnt\global\advance\@IEEEeqncolcnt by \@IEEEeqnnumcols\relax\fi%
+\@ifnextchar[{\@IEEEeqnarraydblrulerowcut}{\@IEEEeqnarraydblrulerowcut[\arrayrulewidth]}}
+\def\@IEEEeqnarraydblrulerowcut[#1]{\relax\@ifnextchar[{\@@IEEEeqnarraydblrulerowcut[#1]}%
+{\@@IEEEeqnarraydblrulerowcut[#1][\doublerulesep]}}
+\def\@@IEEEeqnarraydblrulerowcut[#1][#2]{\def\@IEEEeqnarraydblrulerowARG{#1}%
+% we allow the user to say \IEEEeqnarraydblrulerow[][]
+\ifx\@IEEEeqnarraydblrulerowARG\@empty%
+\@IEEEeqnarrayrulerow[\arrayrulewidth]%
+\else%
+\@IEEEeqnarrayrulerow[#1]%
+\fi%
+\def\@IEEEeqnarraydblrulerowARG{#2}%
+\ifx\@IEEEeqnarraydblrulerowARG\@empty%
+\\\IEEEeqnarrayseprowcut[\doublerulesep][\relax]%
+\else%
+\\\IEEEeqnarrayseprowcut[#2][\relax]%
+\fi%
+\\\multispan{\@IEEEeqnnumcols}%
+% advance column counter only if the IEEEeqnarray environment wants it
+\if@advanceIEEEeqncolcnt\global\advance\@IEEEeqncolcnt by \@IEEEeqnnumcols\relax\fi%
+\def\@IEEEeqnarraydblrulerowARG{#1}%
+\ifx\@IEEEeqnarraydblrulerowARG\@empty%
+\@IEEEeqnarrayrulerow[\arrayrulewidth]%
+\else%
+\@IEEEeqnarrayrulerow[#1]%
+\fi%
+}
+
+
+
+% inserts a full row's worth of &'s
+% relies on \@IEEEeqnnumcols to provide the correct number of columns
+% uses \@IEEEtrantmptoksA, \count0 as scratch registers
+\def\@IEEEeqnarrayhoptolastcolumn{\@IEEEtrantmptoksA={}\count0=1\relax%
+\loop% add cols if the user did not use them all
+\ifnum\count0<\@IEEEeqnnumcols\relax%
+\@IEEEappendtoksA{&}%
+\advance\count0 by 1\relax% update the col count
+\repeat%
+\the\@IEEEtrantmptoksA%execute the &'s
+}
+
+
+
+\newif\if@IEEEeqnarrayISinner % flag to indicate if we are within the lines
+\@IEEEeqnarrayISinnerfalse % of an IEEEeqnarray - after the IEEEeqnarraydecl
+
+\edef\@IEEEeqnarrayTHEstrutheight{0pt} % height and depth of IEEEeqnarray struts
+\edef\@IEEEeqnarrayTHEstrutdepth{0pt}
+
+\edef\@IEEEeqnarrayTHEmasterstrutheight{0pt} % default height and depth of
+\edef\@IEEEeqnarrayTHEmasterstrutdepth{0pt} % struts within an IEEEeqnarray
+
+\edef\@IEEEeqnarrayTHEmasterstrutHSAVE{0pt} % saved master strut height
+\edef\@IEEEeqnarrayTHEmasterstrutDSAVE{0pt} % and depth
+
+\newif\if@IEEEeqnarrayusemasterstrut % flag to indicate that the master strut value
+\@IEEEeqnarrayusemasterstruttrue % is to be used
+
+
+
+% saves the strut height and depth of the master strut
+\def\@IEEEeqnarraymasterstrutsave{\relax%
+\expandafter\skip0=\@IEEEeqnarrayTHEmasterstrutheight\relax%
+\expandafter\skip2=\@IEEEeqnarrayTHEmasterstrutdepth\relax%
+% remove stretchability
+\dimen0\skip0\relax%
+\dimen2\skip2\relax%
+% save values
+\edef\@IEEEeqnarrayTHEmasterstrutHSAVE{\the\dimen0}%
+\edef\@IEEEeqnarrayTHEmasterstrutDSAVE{\the\dimen2}}
+
+% restores the strut height and depth of the master strut
+\def\@IEEEeqnarraymasterstrutrestore{\relax%
+\expandafter\skip0=\@IEEEeqnarrayTHEmasterstrutHSAVE\relax%
+\expandafter\skip2=\@IEEEeqnarrayTHEmasterstrutDSAVE\relax%
+% remove stretchability
+\dimen0\skip0\relax%
+\dimen2\skip2\relax%
+% restore values
+\edef\@IEEEeqnarrayTHEmasterstrutheight{\the\dimen0}%
+\edef\@IEEEeqnarrayTHEmasterstrutdepth{\the\dimen2}}
+
+
+% globally restores the strut height and depth to the
+% master values and sets the master strut flag to true
+\def\@IEEEeqnarraystrutreset{\relax%
+\expandafter\skip0=\@IEEEeqnarrayTHEmasterstrutheight\relax%
+\expandafter\skip2=\@IEEEeqnarrayTHEmasterstrutdepth\relax%
+% remove stretchability
+\dimen0\skip0\relax%
+\dimen2\skip2\relax%
+% restore values
+\xdef\@IEEEeqnarrayTHEstrutheight{\the\dimen0}%
+\xdef\@IEEEeqnarrayTHEstrutdepth{\the\dimen2}%
+\global\@IEEEeqnarrayusemasterstruttrue}
+
+
+% if the master strut is not to be used, make the current
+% values of \@IEEEeqnarrayTHEstrutheight, \@IEEEeqnarrayTHEstrutdepth
+% and the use master strut flag, global
+% this allows user strut commands issued in the last column to be carried
+% into the isolation/strut column
+\def\@IEEEeqnarrayglobalizestrutstatus{\relax%
+\if@IEEEeqnarrayusemasterstrut\else%
+\xdef\@IEEEeqnarrayTHEstrutheight{\@IEEEeqnarrayTHEstrutheight}%
+\xdef\@IEEEeqnarrayTHEstrutdepth{\@IEEEeqnarrayTHEstrutdepth}%
+\global\@IEEEeqnarrayusemasterstrutfalse%
+\fi}
+
+
+
+% usage: \IEEEeqnarraystrutsize{height}{depth}[font size commands]
+% If called outside the lines of an IEEEeqnarray, sets the height
+% and depth of both the master and local struts. If called inside
+% an IEEEeqnarray line, sets the height and depth of the local strut
+% only and sets the flag to indicate the use of the local strut
+% values. If the height or depth is left blank, 0.7\normalbaselineskip
+% and 0.3\normalbaselineskip will be used, respectively.
+% The optional argument can be used to evaluate the lengths under
+% a different font size and styles. If none is specified, the current
+% font is used.
+% uses scratch registers \skip0, \skip2, \skip3, \dimen0, \dimen2
+\def\IEEEeqnarraystrutsize#1#2{\relax\@ifnextchar[{\@IEEEeqnarraystrutsize{#1}{#2}}{\@IEEEeqnarraystrutsize{#1}{#2}[\relax]}}
+\def\@IEEEeqnarraystrutsize#1#2[#3]{\def\@IEEEeqnarraystrutsizeARG{#1}%
+\ifx\@IEEEeqnarraystrutsizeARG\@empty%
+{\setbox0=\hbox{#3\relax\global\skip3=0.7\normalbaselineskip}}%
+\skip0=\skip3\relax%
+\else% arg one present
+{\setbox0=\hbox{#3\relax\global\skip3=#1\relax}}%
+\skip0=\skip3\relax%
+\fi% if null arg
+\def\@IEEEeqnarraystrutsizeARG{#2}%
+\ifx\@IEEEeqnarraystrutsizeARG\@empty%
+{\setbox0=\hbox{#3\relax\global\skip3=0.3\normalbaselineskip}}%
+\skip2=\skip3\relax%
+\else% arg two present
+{\setbox0=\hbox{#3\relax\global\skip3=#2\relax}}%
+\skip2=\skip3\relax%
+\fi% if null arg
+% remove stretchability, just to be safe
+\dimen0\skip0\relax%
+\dimen2\skip2\relax%
+% dimen0 = height, dimen2 = depth
+\if@IEEEeqnarrayISinner% inner does not touch master strut size
+\edef\@IEEEeqnarrayTHEstrutheight{\the\dimen0}%
+\edef\@IEEEeqnarrayTHEstrutdepth{\the\dimen2}%
+\@IEEEeqnarrayusemasterstrutfalse% do not use master
+\else% outer, have to set master strut too
+\edef\@IEEEeqnarrayTHEmasterstrutheight{\the\dimen0}%
+\edef\@IEEEeqnarrayTHEmasterstrutdepth{\the\dimen2}%
+\edef\@IEEEeqnarrayTHEstrutheight{\the\dimen0}%
+\edef\@IEEEeqnarrayTHEstrutdepth{\the\dimen2}%
+\@IEEEeqnarrayusemasterstruttrue% use master strut
+\fi}
+
+
+% usage: \IEEEeqnarraystrutsizeadd{added height}{added depth}[font size commands]
+% If called outside the lines of an IEEEeqnarray, adds the given height
+% and depth to both the master and local struts.
+% If called inside an IEEEeqnarray line, adds the given height and depth
+% to the local strut only and sets the flag to indicate the use
+% of the local strut values.
+% In both cases, if a height or depth is left blank, 0pt is used instead.
+% The optional argument can be used to evaluate the lengths under
+% a different font size and styles. If none is specified, the current
+% font is used.
+% uses scratch registers \skip0, \skip2, \skip3, \dimen0, \dimen2
+\def\IEEEeqnarraystrutsizeadd#1#2{\relax\@ifnextchar[{\@IEEEeqnarraystrutsizeadd{#1}{#2}}{\@IEEEeqnarraystrutsizeadd{#1}{#2}[\relax]}}
+\def\@IEEEeqnarraystrutsizeadd#1#2[#3]{\def\@IEEEeqnarraystrutsizearg{#1}%
+\ifx\@IEEEeqnarraystrutsizearg\@empty%
+\skip0=0pt\relax%
+\else% arg one present
+{\setbox0=\hbox{#3\relax\global\skip3=#1}}%
+\skip0=\skip3\relax%
+\fi% if null arg
+\def\@IEEEeqnarraystrutsizearg{#2}%
+\ifx\@IEEEeqnarraystrutsizearg\@empty%
+\skip2=0pt\relax%
+\else% arg two present
+{\setbox0=\hbox{#3\relax\global\skip3=#2}}%
+\skip2=\skip3\relax%
+\fi% if null arg
+% remove stretchability, just to be safe
+\dimen0\skip0\relax%
+\dimen2\skip2\relax%
+% dimen0 = height, dimen2 = depth
+\if@IEEEeqnarrayISinner% inner does not touch master strut size
+% get local strut size
+\expandafter\skip0=\@IEEEeqnarrayTHEstrutheight\relax%
+\expandafter\skip2=\@IEEEeqnarrayTHEstrutdepth\relax%
+% add it to the user supplied values
+\advance\dimen0 by \skip0\relax%
+\advance\dimen2 by \skip2\relax%
+% update the local strut size
+\edef\@IEEEeqnarrayTHEstrutheight{\the\dimen0}%
+\edef\@IEEEeqnarrayTHEstrutdepth{\the\dimen2}%
+\@IEEEeqnarrayusemasterstrutfalse% do not use master
+\else% outer, have to set master strut too
+% get master strut size
+\expandafter\skip0=\@IEEEeqnarrayTHEmasterstrutheight\relax%
+\expandafter\skip2=\@IEEEeqnarrayTHEmasterstrutdepth\relax%
+% add it to the user supplied values
+\advance\dimen0 by \skip0\relax%
+\advance\dimen2 by \skip2\relax%
+% update the local and master strut sizes
+\edef\@IEEEeqnarrayTHEmasterstrutheight{\the\dimen0}%
+\edef\@IEEEeqnarrayTHEmasterstrutdepth{\the\dimen2}%
+\edef\@IEEEeqnarrayTHEstrutheight{\the\dimen0}%
+\edef\@IEEEeqnarrayTHEstrutdepth{\the\dimen2}%
+\@IEEEeqnarrayusemasterstruttrue% use master strut
+\fi}
+
+
+% allow user a way to see the struts
+\newif\ifIEEEvisiblestruts
+\IEEEvisiblestrutsfalse
+
+% inserts an invisible strut using the master or local strut values
+% uses scratch registers \skip0, \skip2, \dimen0, \dimen2
+\def\@IEEEeqnarrayinsertstrut{\relax%
+\if@IEEEeqnarrayusemasterstrut
+% get master strut size
+\expandafter\skip0=\@IEEEeqnarrayTHEmasterstrutheight\relax%
+\expandafter\skip2=\@IEEEeqnarrayTHEmasterstrutdepth\relax%
+\else%
+% get local strut size
+\expandafter\skip0=\@IEEEeqnarrayTHEstrutheight\relax%
+\expandafter\skip2=\@IEEEeqnarrayTHEstrutdepth\relax%
+\fi%
+% remove stretchability, probably not needed
+\dimen0\skip0\relax%
+\dimen2\skip2\relax%
+% dimen0 = height, dimen2 = depth
+% allow user to see struts if desired
+\ifIEEEvisiblestruts%
+\vrule width0.2pt height\dimen0 depth\dimen2\relax%
+\else%
+\vrule width0pt height\dimen0 depth\dimen2\relax\fi}
+
+
+% creates an invisible strut, useable even outside \IEEEeqnarray
+% if \IEEEvisiblestrutstrue, the strut will be visible and 0.2pt wide.
+% usage: \IEEEstrut[height][depth][font size commands]
+% default is \IEEEstrut[0.7\normalbaselineskip][0.3\normalbaselineskip][\relax]
+% blank arguments inherit the default values
+% uses \dimen0, \dimen2, \skip0, \skip2
+\def\IEEEstrut{\relax\@ifnextchar[{\@IEEEstrut}{\@IEEEstrut[0.7\normalbaselineskip]}}
+\def\@IEEEstrut[#1]{\relax\@ifnextchar[{\@@IEEEstrut[#1]}{\@@IEEEstrut[#1][0.3\normalbaselineskip]}}
+\def\@@IEEEstrut[#1][#2]{\relax\@ifnextchar[{\@@@IEEEstrut[#1][#2]}{\@@@IEEEstrut[#1][#2][\relax]}}
+\def\@@@IEEEstrut[#1][#2][#3]{\mbox{#3\relax%
+\def\@IEEEstrutARG{#1}%
+\ifx\@IEEEstrutARG\@empty%
+\skip0=0.7\normalbaselineskip\relax%
+\else%
+\skip0=#1\relax%
+\fi%
+\def\@IEEEstrutARG{#2}%
+\ifx\@IEEEstrutARG\@empty%
+\skip2=0.3\normalbaselineskip\relax%
+\else%
+\skip2=#2\relax%
+\fi%
+% remove stretchability, probably not needed
+\dimen0\skip0\relax%
+\dimen2\skip2\relax%
+\ifIEEEvisiblestruts%
+\vrule width0.2pt height\dimen0 depth\dimen2\relax%
+\else%
+\vrule width0.0pt height\dimen0 depth\dimen2\relax\fi}}
+
+
+% enables strut mode by setting a default strut size and then zeroing the
+% \baselineskip, \lineskip, \lineskiplimit and \jot
+\def\IEEEeqnarraystrutmode{\IEEEeqnarraystrutsize{0.7\normalbaselineskip}{0.3\normalbaselineskip}[\relax]%
+\baselineskip=0pt\lineskip=0pt\lineskiplimit=0pt\jot=0pt}
+
+
+
+\def\IEEEeqnarray{\@IEEEeqnarraystarformfalse\@IEEEeqnarray}
+\def\endIEEEeqnarray{\end@IEEEeqnarray}
+
+\@namedef{IEEEeqnarray*}{\@IEEEeqnarraystarformtrue\@IEEEeqnarray}
+\@namedef{endIEEEeqnarray*}{\end@IEEEeqnarray}
+
+
+% \IEEEeqnarray is an enhanced \eqnarray.
+% The star form defaults to not putting equation numbers at the end of each row.
+% usage: \IEEEeqnarray[decl]{cols}
+\def\@IEEEeqnarray{\relax\@ifnextchar[{\@@IEEEeqnarray}{\@@IEEEeqnarray[\relax]}}
+\def\@@IEEEeqnarray[#1]#2{%
+ % default to showing the equation number or not based on whether or not
+ % the star form was involked
+ \if@IEEEeqnarraystarform\global\@eqnswfalse
+ \else% not the star form
+ \global\@eqnswtrue
+ \fi% if star form
+ \@IEEEissubequationfalse% default to no subequations
+ \@IEEElastlinewassubequationfalse% assume last line is not a sub equation
+ \@IEEEeqnarrayISinnerfalse% not yet within the lines of the halign
+ \@IEEEeqnarraystrutsize{0pt}{0pt}[\relax]% turn off struts by default
+ \@IEEEeqnarrayusemasterstruttrue% use master strut till user asks otherwise
+ \IEEEvisiblestrutsfalse% diagnostic mode defaults to off
+ % no extra space unless the user specifically requests it
+ \lineskip=0pt\relax
+ \lineskiplimit=0pt\relax
+ \baselineskip=\normalbaselineskip\relax%
+ \jot=\IEEEnormaljot\relax%
+ \mathsurround\z@\relax% no extra spacing around math
+ \@advanceIEEEeqncolcnttrue% advance the col counter for each col the user uses,
+ % used in \IEEEeqnarraymulticol and in the preamble build
+ \stepcounter{equation}% advance equation counter before first line
+ \setcounter{IEEEsubequation}{0}% no subequation yet
+ \def\@currentlabel{\p@equation\theequation}% redefine the ref label
+ \IEEEeqnarraydecl\relax% allow a way for the user to make global overrides
+ #1\relax% allow user to override defaults
+ \let\\\@IEEEeqnarraycr% replace newline with one that can put in eqn. numbers
+ \global\@IEEEeqncolcnt\z@% col. count = 0 for first line
+ \@IEEEbuildpreamble #2\end\relax% build the preamble and put it into \@IEEEtrantmptoksA
+ % put in the column for the equation number
+ \ifnum\@IEEEeqnnumcols>0\relax\@IEEEappendtoksA{&}\fi% col separator for those after the first
+ \toks0={##}%
+ % advance the \@IEEEeqncolcnt for the isolation col, this helps with error checking
+ \@IEEEappendtoksA{\global\advance\@IEEEeqncolcnt by 1\relax}%
+ % add the isolation column
+ \@IEEEappendtoksA{\tabskip\z@skip\bgroup\the\toks0\egroup}%
+ % advance the \@IEEEeqncolcnt for the equation number col, this helps with error checking
+ \@IEEEappendtoksA{&\global\advance\@IEEEeqncolcnt by 1\relax}%
+ % add the equation number col to the preamble
+ \@IEEEappendtoksA{\tabskip\z@skip\hb@xt@\z@\bgroup\hss\the\toks0\egroup}%
+ % note \@IEEEeqnnumcols does not count the equation col or isolation col
+ % set the starting tabskip glue as determined by the preamble build
+ \tabskip=\@IEEEBPstartglue\relax
+ % begin the display alignment
+ \@IEEEeqnarrayISinnertrue% commands are now within the lines
+ $$\everycr{}\halign to\displaywidth\bgroup
+ % "exspand" the preamble
+ \span\the\@IEEEtrantmptoksA\cr}
+
+% enter isolation/strut column (or the next column if the user did not use
+% every column), record the strut status, complete the columns, do the strut if needed,
+% restore counters to correct values and exit
+\def\end@IEEEeqnarray{\@IEEEeqnarrayglobalizestrutstatus&\@@IEEEeqnarraycr\egroup%
+\if@IEEElastlinewassubequation\global\advance\c@IEEEsubequation\m@ne\fi%
+\global\advance\c@equation\m@ne%
+$$\@ignoretrue}
+
+% need a way to remember if last line is a subequation
+\newif\if@IEEElastlinewassubequation%
+\@IEEElastlinewassubequationfalse
+
+% IEEEeqnarray uses a modifed \\ instead of the plain \cr to
+% end rows. This allows for things like \\*[vskip amount]
+% This "cr" macros are modified versions those for LaTeX2e's eqnarray
+% the {\ifnum0=`} braces must be kept away from the last column to avoid
+% altering spacing of its math, so we use & to advance to the next column
+% as there is an isolation/strut column after the user's columns
+\def\@IEEEeqnarraycr{\@IEEEeqnarrayglobalizestrutstatus&% save strut status and advance to next column
+ {\ifnum0=`}\fi
+ \@ifstar{%
+ \global\@eqpen\@M\@IEEEeqnarrayYCR
+ }{%
+ \global\@eqpen\interdisplaylinepenalty \@IEEEeqnarrayYCR
+ }%
+}
+
+\def\@IEEEeqnarrayYCR{\@testopt\@IEEEeqnarrayXCR\z@skip}
+
+\def\@IEEEeqnarrayXCR[#1]{%
+ \ifnum0=`{\fi}%
+ \@@IEEEeqnarraycr
+ \noalign{\penalty\@eqpen\vskip\jot\vskip #1\relax}}%
+
+\def\@@IEEEeqnarraycr{\@IEEEtrantmptoksA={}% clear token register
+ \advance\@IEEEeqncolcnt by -1\relax% adjust col count because of the isolation column
+ \ifnum\@IEEEeqncolcnt>\@IEEEeqnnumcols\relax
+ \@IEEEclspkgerror{Too many columns within the IEEEeqnarray\MessageBreak
+ environment}%
+ {Use fewer \string &'s or put more columns in the IEEEeqnarry column\MessageBreak
+ specifications.}\relax%
+ \else
+ \loop% add cols if the user did not use them all
+ \ifnum\@IEEEeqncolcnt<\@IEEEeqnnumcols\relax
+ \@IEEEappendtoksA{&}%
+ \advance\@IEEEeqncolcnt by 1\relax% update the col count
+ \repeat
+ % this number of &'s will take us the the isolation column
+ \fi
+ % execute the &'s
+ \the\@IEEEtrantmptoksA%
+ % handle the strut/isolation column
+ \@IEEEeqnarrayinsertstrut% do the strut if needed
+ \@IEEEeqnarraystrutreset% reset the strut system for next line or IEEEeqnarray
+ &% and enter the equation number column
+ % is this line needs an equation number, display it and advance the
+ % (sub)equation counters, record what type this line was
+ \if@eqnsw%
+ \if@IEEEissubequation\theIEEEsubequationdis\addtocounter{equation}{1}\stepcounter{IEEEsubequation}%
+ \global\@IEEElastlinewassubequationtrue%
+ \else% display a standard equation number, initialize the IEEEsubequation counter
+ \theequationdis\stepcounter{equation}\setcounter{IEEEsubequation}{0}%
+ \global\@IEEElastlinewassubequationfalse\fi%
+ \fi%
+ % reset the eqnsw flag to indicate default preference of the display of equation numbers
+ \if@IEEEeqnarraystarform\global\@eqnswfalse\else\global\@eqnswtrue\fi
+ \global\@IEEEissubequationfalse% reset the subequation flag
+ % reset the number of columns the user actually used
+ \global\@IEEEeqncolcnt\z@\relax
+ % the real end of the line
+ \cr}
+
+
+
+
+
+% \IEEEeqnarraybox is like \IEEEeqnarray except the box form puts everything
+% inside a vtop, vbox, or vcenter box depending on the letter in the second
+% optional argument (t,b,c). Vbox is the default. Unlike \IEEEeqnarray,
+% equation numbers are not displayed and \IEEEeqnarraybox can be nested.
+% \IEEEeqnarrayboxm is for math mode (like \array) and does not put the vbox
+% within an hbox.
+% \IEEEeqnarrayboxt is for text mode (like \tabular) and puts the vbox within
+% a \hbox{$ $} construct.
+% \IEEEeqnarraybox will auto detect whether to use \IEEEeqnarrayboxm or
+% \IEEEeqnarrayboxt depending on the math mode.
+% The third optional argument specifies the width this box is to be set to -
+% natural width is the default.
+% The * forms do not add \jot line spacing
+% usage: \IEEEeqnarraybox[decl][pos][width]{cols}
+\def\IEEEeqnarrayboxm{\@IEEEeqnarraystarformfalse\@IEEEeqnarrayboxHBOXSWfalse\@IEEEeqnarraybox}
+\def\endIEEEeqnarrayboxm{\end@IEEEeqnarraybox}
+\@namedef{IEEEeqnarrayboxm*}{\@IEEEeqnarraystarformtrue\@IEEEeqnarrayboxHBOXSWfalse\@IEEEeqnarraybox}
+\@namedef{endIEEEeqnarrayboxm*}{\end@IEEEeqnarraybox}
+
+\def\IEEEeqnarrayboxt{\@IEEEeqnarraystarformfalse\@IEEEeqnarrayboxHBOXSWtrue\@IEEEeqnarraybox}
+\def\endIEEEeqnarrayboxt{\end@IEEEeqnarraybox}
+\@namedef{IEEEeqnarrayboxt*}{\@IEEEeqnarraystarformtrue\@IEEEeqnarrayboxHBOXSWtrue\@IEEEeqnarraybox}
+\@namedef{endIEEEeqnarrayboxt*}{\end@IEEEeqnarraybox}
+
+\def\IEEEeqnarraybox{\@IEEEeqnarraystarformfalse\ifmmode\@IEEEeqnarrayboxHBOXSWfalse\else\@IEEEeqnarrayboxHBOXSWtrue\fi%
+\@IEEEeqnarraybox}
+\def\endIEEEeqnarraybox{\end@IEEEeqnarraybox}
+
+\@namedef{IEEEeqnarraybox*}{\@IEEEeqnarraystarformtrue\ifmmode\@IEEEeqnarrayboxHBOXSWfalse\else\@IEEEeqnarrayboxHBOXSWtrue\fi%
+\@IEEEeqnarraybox}
+\@namedef{endIEEEeqnarraybox*}{\end@IEEEeqnarraybox}
+
+% flag to indicate if the \IEEEeqnarraybox needs to put things into an hbox{$ $}
+% for \vcenter in non-math mode
+\newif\if@IEEEeqnarrayboxHBOXSW%
+\@IEEEeqnarrayboxHBOXSWfalse
+
+\def\@IEEEeqnarraybox{\relax\@ifnextchar[{\@@IEEEeqnarraybox}{\@@IEEEeqnarraybox[\relax]}}
+\def\@@IEEEeqnarraybox[#1]{\relax\@ifnextchar[{\@@@IEEEeqnarraybox[#1]}{\@@@IEEEeqnarraybox[#1][b]}}
+\def\@@@IEEEeqnarraybox[#1][#2]{\relax\@ifnextchar[{\@@@@IEEEeqnarraybox[#1][#2]}{\@@@@IEEEeqnarraybox[#1][#2][\relax]}}
+
+% #1 = decl; #2 = t,b,c; #3 = width, #4 = col specs
+\def\@@@@IEEEeqnarraybox[#1][#2][#3]#4{\@IEEEeqnarrayISinnerfalse % not yet within the lines of the halign
+ \@IEEEeqnarraymasterstrutsave% save current master strut values
+ \@IEEEeqnarraystrutsize{0pt}{0pt}[\relax]% turn off struts by default
+ \@IEEEeqnarrayusemasterstruttrue% use master strut till user asks otherwise
+ \IEEEvisiblestrutsfalse% diagnostic mode defaults to off
+ % no extra space unless the user specifically requests it
+ \lineskip=0pt\relax%
+ \lineskiplimit=0pt\relax%
+ \baselineskip=\normalbaselineskip\relax%
+ \jot=\IEEEnormaljot\relax%
+ \mathsurround\z@\relax% no extra spacing around math
+ % the default end glues are zero for an \IEEEeqnarraybox
+ \edef\@IEEEeqnarraycolSEPdefaultstart{\@IEEEeqnarraycolSEPzero}% default start glue
+ \edef\@IEEEeqnarraycolSEPdefaultend{\@IEEEeqnarraycolSEPzero}% default end glue
+ \edef\@IEEEeqnarraycolSEPdefaultmid{\@IEEEeqnarraycolSEPzero}% default inter-column glue
+ \@advanceIEEEeqncolcntfalse% do not advance the col counter for each col the user uses,
+ % used in \IEEEeqnarraymulticol and in the preamble build
+ \IEEEeqnarrayboxdecl\relax% allow a way for the user to make global overrides
+ #1\relax% allow user to override defaults
+ \let\\\@IEEEeqnarrayboxcr% replace newline with one that allows optional spacing
+ \@IEEEbuildpreamble #4\end\relax% build the preamble and put it into \@IEEEtrantmptoksA
+ % add an isolation column to the preamble to stop \\'s {} from getting into the last col
+ \ifnum\@IEEEeqnnumcols>0\relax\@IEEEappendtoksA{&}\fi% col separator for those after the first
+ \toks0={##}%
+ % add the isolation column to the preamble
+ \@IEEEappendtoksA{\tabskip\z@skip\bgroup\the\toks0\egroup}%
+ % set the starting tabskip glue as determined by the preamble build
+ \tabskip=\@IEEEBPstartglue\relax
+ % begin the alignment
+ \everycr{}%
+ % use only the very first token to determine the positioning
+ % this stops some problems when the user uses more than one letter,
+ % but is probably not worth the effort
+ % \noindent is used as a delimiter
+ \def\@IEEEgrabfirstoken##1##2\noindent{\let\@IEEEgrabbedfirstoken=##1}%
+ \@IEEEgrabfirstoken#2\relax\relax\noindent
+ % \@IEEEgrabbedfirstoken has the first token, the rest are discarded
+ % if we need to put things into and hbox and go into math mode, do so now
+ \if@IEEEeqnarrayboxHBOXSW \leavevmode \hbox \bgroup $\fi%
+ % use the appropriate vbox type
+ \if\@IEEEgrabbedfirstoken t\relax\vtop\else\if\@IEEEgrabbedfirstoken c\relax%
+ \vcenter\else\vbox\fi\fi\bgroup%
+ \@IEEEeqnarrayISinnertrue% commands are now within the lines
+ \ifx#3\relax\halign\else\halign to #3\relax\fi%
+ \bgroup
+ % "exspand" the preamble
+ \span\the\@IEEEtrantmptoksA\cr}
+
+% carry strut status and enter the isolation/strut column,
+% exit from math mode if needed, and exit
+\def\end@IEEEeqnarraybox{\@IEEEeqnarrayglobalizestrutstatus% carry strut status
+&% enter isolation/strut column
+\@IEEEeqnarrayinsertstrut% do strut if needed
+\@IEEEeqnarraymasterstrutrestore% restore the previous master strut values
+% reset the strut system for next IEEEeqnarray
+% (sets local strut values back to previous master strut values)
+\@IEEEeqnarraystrutreset%
+% ensure last line, exit from halign, close vbox
+\crcr\egroup\egroup%
+% exit from math mode and close hbox if needed
+\if@IEEEeqnarrayboxHBOXSW $\egroup\fi}
+
+
+
+% IEEEeqnarraybox uses a modifed \\ instead of the plain \cr to
+% end rows. This allows for things like \\[vskip amount]
+% This "cr" macros are modified versions those for LaTeX2e's eqnarray
+% For IEEEeqnarraybox, \\* is the same as \\
+% the {\ifnum0=`} braces must be kept away from the last column to avoid
+% altering spacing of its math, so we use & to advance to the isolation/strut column
+% carry strut status into isolation/strut column
+\def\@IEEEeqnarrayboxcr{\@IEEEeqnarrayglobalizestrutstatus% carry strut status
+&% enter isolation/strut column
+\@IEEEeqnarrayinsertstrut% do strut if needed
+% reset the strut system for next line or IEEEeqnarray
+\@IEEEeqnarraystrutreset%
+{\ifnum0=`}\fi%
+\@ifstar{\@IEEEeqnarrayboxYCR}{\@IEEEeqnarrayboxYCR}}
+
+% test and setup the optional argument to \\[]
+\def\@IEEEeqnarrayboxYCR{\@testopt\@IEEEeqnarrayboxXCR\z@skip}
+
+% IEEEeqnarraybox does not automatically increase line spacing by \jot
+\def\@IEEEeqnarrayboxXCR[#1]{\ifnum0=`{\fi}%
+\cr\noalign{\if@IEEEeqnarraystarform\else\vskip\jot\fi\vskip#1\relax}}
+
+
+
+% starts the halign preamble build
+\def\@IEEEbuildpreamble{\@IEEEtrantmptoksA={}% clear token register
+\let\@IEEEBPcurtype=u%current column type is not yet known
+\let\@IEEEBPprevtype=s%the previous column type was the start
+\let\@IEEEBPnexttype=u%next column type is not yet known
+% ensure these are valid
+\def\@IEEEBPcurglue={0pt plus 0pt minus 0pt}%
+\def\@IEEEBPcurcolname{@IEEEdefault}% name of current column definition
+% currently acquired numerically referenced glue
+% use a name that is easier to remember
+\let\@IEEEBPcurnum=\@IEEEtrantmpcountA%
+\@IEEEBPcurnum=0%
+% tracks number of columns in the preamble
+\@IEEEeqnnumcols=0%
+% record the default end glues
+\edef\@IEEEBPstartglue{\@IEEEeqnarraycolSEPdefaultstart}%
+\edef\@IEEEBPendglue{\@IEEEeqnarraycolSEPdefaultend}%
+% now parse the user's column specifications
+\@@IEEEbuildpreamble}
+
+
+% parses and builds the halign preamble
+\def\@@IEEEbuildpreamble#1#2{\let\@@nextIEEEbuildpreamble=\@@IEEEbuildpreamble%
+% use only the very first token to check the end
+% \noindent is used as a delimiter as \end can be present here
+\def\@IEEEgrabfirstoken##1##2\noindent{\let\@IEEEgrabbedfirstoken=##1}%
+\@IEEEgrabfirstoken#1\relax\relax\noindent
+\ifx\@IEEEgrabbedfirstoken\end\let\@@nextIEEEbuildpreamble=\@@IEEEfinishpreamble\else%
+% identify current and next token type
+\@IEEEgetcoltype{#1}{\@IEEEBPcurtype}{1}% current, error on invalid
+\@IEEEgetcoltype{#2}{\@IEEEBPnexttype}{0}% next, no error on invalid next
+% if curtype is a glue, get the glue def
+\if\@IEEEBPcurtype g\@IEEEgetcurglue{#1}{\@IEEEBPcurglue}\fi%
+% if curtype is a column, get the column def and set the current column name
+\if\@IEEEBPcurtype c\@IEEEgetcurcol{#1}\fi%
+% if curtype is a numeral, acquire the user defined glue
+\if\@IEEEBPcurtype n\@IEEEprocessNcol{#1}\fi%
+% process the acquired glue
+\if\@IEEEBPcurtype g\@IEEEprocessGcol\fi%
+% process the acquired col
+\if\@IEEEBPcurtype c\@IEEEprocessCcol\fi%
+% ready prevtype for next col spec.
+\let\@IEEEBPprevtype=\@IEEEBPcurtype%
+% be sure and put back the future token(s) as a group
+\fi\@@nextIEEEbuildpreamble{#2}}
+
+
+% executed just after preamble build is completed
+% warn about zero cols, and if prevtype type = u, put in end tabskip glue
+\def\@@IEEEfinishpreamble#1{\ifnum\@IEEEeqnnumcols<1\relax
+\@IEEEclspkgerror{No column specifiers declared for IEEEeqnarray}%
+{At least one column type must be declared for each IEEEeqnarray.}%
+\fi%num cols less than 1
+%if last type undefined, set default end tabskip glue
+\if\@IEEEBPprevtype u\@IEEEappendtoksA{\tabskip=\@IEEEBPendglue}\fi}
+
+
+% Identify and return the column specifier's type code
+\def\@IEEEgetcoltype#1#2#3{%
+% use only the very first token to determine the type
+% \noindent is used as a delimiter as \end can be present here
+\def\@IEEEgrabfirstoken##1##2\noindent{\let\@IEEEgrabbedfirstoken=##1}%
+\@IEEEgrabfirstoken#1\relax\relax\noindent
+% \@IEEEgrabfirstoken has the first token, the rest are discarded
+% n = number
+% g = glue (any other char in catagory 12)
+% c = letter
+% e = \end
+% u = undefined
+% third argument: 0 = no error message, 1 = error on invalid char
+\let#2=u\relax% assume invalid until know otherwise
+\ifx\@IEEEgrabbedfirstoken\end\let#2=e\else
+\ifcat\@IEEEgrabbedfirstoken\relax\else% screen out control sequences
+\if0\@IEEEgrabbedfirstoken\let#2=n\else
+\if1\@IEEEgrabbedfirstoken\let#2=n\else
+\if2\@IEEEgrabbedfirstoken\let#2=n\else
+\if3\@IEEEgrabbedfirstoken\let#2=n\else
+\if4\@IEEEgrabbedfirstoken\let#2=n\else
+\if5\@IEEEgrabbedfirstoken\let#2=n\else
+\if6\@IEEEgrabbedfirstoken\let#2=n\else
+\if7\@IEEEgrabbedfirstoken\let#2=n\else
+\if8\@IEEEgrabbedfirstoken\let#2=n\else
+\if9\@IEEEgrabbedfirstoken\let#2=n\else
+\ifcat,\@IEEEgrabbedfirstoken\let#2=g\relax
+\else\ifcat a\@IEEEgrabbedfirstoken\let#2=c\relax\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
+\if#2u\relax
+\if0\noexpand#3\relax\else\@IEEEclspkgerror{Invalid character in column specifications}%
+{Only letters, numerals and certain other symbols are allowed \MessageBreak
+as IEEEeqnarray column specifiers.}\fi\fi}
+
+
+% identify the current letter referenced column
+% if invalid, use a default column
+\def\@IEEEgetcurcol#1{\expandafter\ifx\csname @IEEEeqnarraycolDEF#1\endcsname\@IEEEeqnarraycolisdefined%
+\def\@IEEEBPcurcolname{#1}\else% invalid column name
+\@IEEEclspkgerror{Invalid column type "#1" in column specifications.\MessageBreak
+Using a default centering column instead}%
+{You must define IEEEeqnarray column types before use.}%
+\def\@IEEEBPcurcolname{@IEEEdefault}\fi}
+
+
+% identify and return the predefined (punctuation) glue value
+\def\@IEEEgetcurglue#1#2{%
+% ! = \! (neg small) -0.16667em (-3/18 em)
+% , = \, (small) 0.16667em ( 3/18 em)
+% : = \: (med) 0.22222em ( 4/18 em)
+% ; = \; (large) 0.27778em ( 5/18 em)
+% ' = \quad 1em
+% " = \qquad 2em
+% . = 0.5\arraycolsep
+% / = \arraycolsep
+% ? = 2\arraycolsep
+% * = 1fil
+% + = \@IEEEeqnarraycolSEPcenter
+% - = \@IEEEeqnarraycolSEPzero
+% Note that all em values are referenced to the math font (textfont2) fontdimen6
+% value for 1em.
+%
+% use only the very first token to determine the type
+% this prevents errant tokens from getting in the main text
+% \noindent is used as a delimiter here
+\def\@IEEEgrabfirstoken##1##2\noindent{\let\@IEEEgrabbedfirstoken=##1}%
+\@IEEEgrabfirstoken#1\relax\relax\noindent
+% get the math font 1em value
+% LaTeX2e's NFSS2 does not preload the fonts, but \IEEEeqnarray needs
+% to gain access to the math (\textfont2) font's spacing parameters.
+% So we create a bogus box here that uses the math font to ensure
+% that \textfont2 is loaded and ready. If this is not done,
+% the \textfont2 stuff here may not work.
+% Thanks to Bernd Raichle for his 1997 post on this topic.
+{\setbox0=\hbox{$\displaystyle\relax$}}%
+% fontdimen6 has the width of 1em (a quad).
+\@IEEEtrantmpdimenA=\fontdimen6\textfont2\relax%
+% identify the glue value based on the first token
+% we discard anything after the first
+\if!\@IEEEgrabbedfirstoken\@IEEEtrantmpdimenA=-0.16667\@IEEEtrantmpdimenA\edef#2{\the\@IEEEtrantmpdimenA}\else
+\if,\@IEEEgrabbedfirstoken\@IEEEtrantmpdimenA=0.16667\@IEEEtrantmpdimenA\edef#2{\the\@IEEEtrantmpdimenA}\else
+\if:\@IEEEgrabbedfirstoken\@IEEEtrantmpdimenA=0.22222\@IEEEtrantmpdimenA\edef#2{\the\@IEEEtrantmpdimenA}\else
+\if;\@IEEEgrabbedfirstoken\@IEEEtrantmpdimenA=0.27778\@IEEEtrantmpdimenA\edef#2{\the\@IEEEtrantmpdimenA}\else
+\if'\@IEEEgrabbedfirstoken\@IEEEtrantmpdimenA=1\@IEEEtrantmpdimenA\edef#2{\the\@IEEEtrantmpdimenA}\else
+\if"\@IEEEgrabbedfirstoken\@IEEEtrantmpdimenA=2\@IEEEtrantmpdimenA\edef#2{\the\@IEEEtrantmpdimenA}\else
+\if.\@IEEEgrabbedfirstoken\@IEEEtrantmpdimenA=0.5\arraycolsep\edef#2{\the\@IEEEtrantmpdimenA}\else
+\if/\@IEEEgrabbedfirstoken\edef#2{\the\arraycolsep}\else
+\if?\@IEEEgrabbedfirstoken\@IEEEtrantmpdimenA=2\arraycolsep\edef#2{\the\@IEEEtrantmpdimenA}\else
+\if *\@IEEEgrabbedfirstoken\edef#2{0pt plus 1fil minus 0pt}\else
+\if+\@IEEEgrabbedfirstoken\edef#2{\@IEEEeqnarraycolSEPcenter}\else
+\if-\@IEEEgrabbedfirstoken\edef#2{\@IEEEeqnarraycolSEPzero}\else
+\edef#2{\@IEEEeqnarraycolSEPzero}%
+\@IEEEclspkgerror{Invalid predefined inter-column glue type "#1" in\MessageBreak
+column specifications. Using a default value of\MessageBreak
+0pt instead}%
+{Only !,:;'"./?*+ and - are valid predefined glue types in the\MessageBreak
+IEEEeqnarray column specifications.}\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi}
+
+
+
+% process a numerical digit from the column specification
+% and look up the corresponding user defined glue value
+% can transform current type from n to g or a as the user defined glue is acquired
+\def\@IEEEprocessNcol#1{\if\@IEEEBPprevtype g%
+\@IEEEclspkgerror{Back-to-back inter-column glue specifiers in column\MessageBreak
+specifications. Ignoring consecutive glue specifiers\MessageBreak
+after the first}%
+{You cannot have two or more glue types next to each other\MessageBreak
+in the IEEEeqnarray column specifications.}%
+\let\@IEEEBPcurtype=a% abort this glue, future digits will be discarded
+\@IEEEBPcurnum=0\relax%
+\else% if we previously aborted a glue
+\if\@IEEEBPprevtype a\@IEEEBPcurnum=0\let\@IEEEBPcurtype=a%maintain digit abortion
+\else%acquire this number
+% save the previous type before the numerical digits started
+\if\@IEEEBPprevtype n\else\let\@IEEEBPprevsavedtype=\@IEEEBPprevtype\fi%
+\multiply\@IEEEBPcurnum by 10\relax%
+\advance\@IEEEBPcurnum by #1\relax% add in number, \relax is needed to stop TeX's number scan
+\if\@IEEEBPnexttype n\else%close acquisition
+\expandafter\ifx\csname @IEEEeqnarraycolSEPDEF\expandafter\romannumeral\number\@IEEEBPcurnum\endcsname\@IEEEeqnarraycolisdefined%
+\edef\@IEEEBPcurglue{\csname @IEEEeqnarraycolSEP\expandafter\romannumeral\number\@IEEEBPcurnum\endcsname}%
+\else%user glue not defined
+\@IEEEclspkgerror{Invalid user defined inter-column glue type "\number\@IEEEBPcurnum" in\MessageBreak
+column specifications. Using a default value of\MessageBreak
+0pt instead}%
+{You must define all IEEEeqnarray numerical inter-column glue types via\MessageBreak
+\string\IEEEeqnarraydefcolsep \space before they are used in column specifications.}%
+\edef\@IEEEBPcurglue{\@IEEEeqnarraycolSEPzero}%
+\fi% glue defined or not
+\let\@IEEEBPcurtype=g% change the type to reflect the acquired glue
+\let\@IEEEBPprevtype=\@IEEEBPprevsavedtype% restore the prev type before this number glue
+\@IEEEBPcurnum=0\relax%ready for next acquisition
+\fi%close acquisition, get glue
+\fi%discard or acquire number
+\fi%prevtype glue or not
+}
+
+
+% process an acquired glue
+% add any acquired column/glue pair to the preamble
+\def\@IEEEprocessGcol{\if\@IEEEBPprevtype a\let\@IEEEBPcurtype=a%maintain previous glue abortions
+\else
+% if this is the start glue, save it, but do nothing else
+% as this is not used in the preamble, but before
+\if\@IEEEBPprevtype s\edef\@IEEEBPstartglue{\@IEEEBPcurglue}%
+\else%not the start glue
+\if\@IEEEBPprevtype g%ignore if back to back glues
+\@IEEEclspkgerror{Back-to-back inter-column glue specifiers in column\MessageBreak
+specifications. Ignoring consecutive glue specifiers\MessageBreak
+after the first}%
+{You cannot have two or more glue types next to each other\MessageBreak
+in the IEEEeqnarray column specifications.}%
+\let\@IEEEBPcurtype=a% abort this glue
+\else% not a back to back glue
+\if\@IEEEBPprevtype c\relax% if the previoustype was a col, add column/glue pair to preamble
+\ifnum\@IEEEeqnnumcols>0\relax\@IEEEappendtoksA{&}\fi
+\toks0={##}%
+% make preamble advance col counter if this environment needs this
+\if@advanceIEEEeqncolcnt\@IEEEappendtoksA{\global\advance\@IEEEeqncolcnt by 1\relax}\fi
+% insert the column defintion into the preamble, being careful not to expand
+% the column definition
+\@IEEEappendtoksA{\tabskip=\@IEEEBPcurglue}%
+\@IEEEappendNOEXPANDtoksA{\begingroup\csname @IEEEeqnarraycolPRE}%
+\@IEEEappendtoksA{\@IEEEBPcurcolname}%
+\@IEEEappendNOEXPANDtoksA{\endcsname}%
+\@IEEEappendtoksA{\the\toks0}%
+\@IEEEappendNOEXPANDtoksA{\relax\relax\relax\relax\relax%
+\relax\relax\relax\relax\relax\csname @IEEEeqnarraycolPOST}%
+\@IEEEappendtoksA{\@IEEEBPcurcolname}%
+\@IEEEappendNOEXPANDtoksA{\endcsname\relax\relax\relax\relax\relax%
+\relax\relax\relax\relax\relax\endgroup}%
+\advance\@IEEEeqnnumcols by 1\relax%one more column in the preamble
+\else% error: non-start glue with no pending column
+\@IEEEclspkgerror{Inter-column glue specifier without a prior column\MessageBreak
+type in the column specifications. Ignoring this glue\MessageBreak
+specifier}%
+{Except for the first and last positions, glue can be placed only\MessageBreak
+between column types.}%
+\let\@IEEEBPcurtype=a% abort this glue
+\fi% previous was a column
+\fi% back-to-back glues
+\fi% is start column glue
+\fi% prev type not a
+}
+
+
+% process an acquired letter referenced column and, if necessary, add it to the preamble
+\def\@IEEEprocessCcol{\if\@IEEEBPnexttype g\else
+\if\@IEEEBPnexttype n\else
+% we have a column followed by something other than a glue (or numeral glue)
+% so we must add this column to the preamble now
+\ifnum\@IEEEeqnnumcols>0\relax\@IEEEappendtoksA{&}\fi%col separator for those after the first
+\if\@IEEEBPnexttype e\@IEEEappendtoksA{\tabskip=\@IEEEBPendglue\relax}\else%put in end glue
+\@IEEEappendtoksA{\tabskip=\@IEEEeqnarraycolSEPdefaultmid\relax}\fi% or default mid glue
+\toks0={##}%
+% make preamble advance col counter if this environment needs this
+\if@advanceIEEEeqncolcnt\@IEEEappendtoksA{\global\advance\@IEEEeqncolcnt by 1\relax}\fi
+% insert the column definition into the preamble, being careful not to expand
+% the column definition
+\@IEEEappendNOEXPANDtoksA{\begingroup\csname @IEEEeqnarraycolPRE}%
+\@IEEEappendtoksA{\@IEEEBPcurcolname}%
+\@IEEEappendNOEXPANDtoksA{\endcsname}%
+\@IEEEappendtoksA{\the\toks0}%
+\@IEEEappendNOEXPANDtoksA{\relax\relax\relax\relax\relax%
+\relax\relax\relax\relax\relax\csname @IEEEeqnarraycolPOST}%
+\@IEEEappendtoksA{\@IEEEBPcurcolname}%
+\@IEEEappendNOEXPANDtoksA{\endcsname\relax\relax\relax\relax\relax%
+\relax\relax\relax\relax\relax\endgroup}%
+\advance\@IEEEeqnnumcols by 1\relax%one more column in the preamble
+\fi%next type not numeral
+\fi%next type not glue
+}
+
+
+%%
+%% END OF IEEEeqnarry DEFINITIONS
+%%
+
+
+
+
+% set up the running headings, this complex because of all the different
+% modes IEEEtran supports
+\if@twoside
+ \ifCLASSOPTIONtechnote
+ \def\ps@headings{%
+ \def\@oddhead{\hbox{}\scriptsize\leftmark \hfil \thepage}
+ \def\@evenhead{\scriptsize\thepage \hfil \leftmark\hbox{}}
+ \ifCLASSOPTIONdraftcls
+ \ifCLASSOPTIONdraftclsnofoot
+ \def\@oddfoot{}\def\@evenfoot{}%
+ \else
+ \def\@oddfoot{\scriptsize\@date\hfil DRAFT}
+ \def\@evenfoot{\scriptsize DRAFT\hfil\@date}
+ \fi
+ \else
+ \def\@oddfoot{}\def\@evenfoot{}
+ \fi}
+ \else % not a technote
+ \def\ps@headings{%
+ \ifCLASSOPTIONconference
+ \def\@oddhead{}
+ \def\@evenhead{}
+ \else
+ \def\@oddhead{\hbox{}\scriptsize\rightmark \hfil \thepage}
+ \def\@evenhead{\scriptsize\thepage \hfil \leftmark\hbox{}}
+ \fi
+ \ifCLASSOPTIONdraftcls
+ \def\@oddhead{\hbox{}\scriptsize\rightmark \hfil \thepage}
+ \def\@evenhead{\scriptsize\thepage \hfil \leftmark\hbox{}}
+ \ifCLASSOPTIONdraftclsnofoot
+ \def\@oddfoot{}\def\@evenfoot{}%
+ \else
+ \def\@oddfoot{\scriptsize\@date\hfil DRAFT}
+ \def\@evenfoot{\scriptsize DRAFT\hfil\@date}
+ \fi
+ \else
+ \def\@oddfoot{}\def\@evenfoot{}%
+ \fi}
+ \fi
+\else % single side
+\def\ps@headings{%
+ \ifCLASSOPTIONconference
+ \def\@oddhead{}
+ \def\@evenhead{}
+ \else
+ \def\@oddhead{\hbox{}\scriptsize\leftmark \hfil \thepage}
+ \def\@evenhead{}
+ \fi
+ \ifCLASSOPTIONdraftcls
+ \def\@oddhead{\hbox{}\scriptsize\leftmark \hfil \thepage}
+ \def\@evenhead{}
+ \ifCLASSOPTIONdraftclsnofoot
+ \def\@oddfoot{}
+ \else
+ \def\@oddfoot{\scriptsize \@date \hfil DRAFT}
+ \fi
+ \else
+ \def\@oddfoot{}
+ \fi
+ \def\@evenfoot{}}
+\fi
+
+
+% title page style
+\def\ps@IEEEtitlepagestyle{\def\@oddfoot{}\def\@evenfoot{}%
+\ifCLASSOPTIONconference
+ \def\@oddhead{}%
+ \def\@evenhead{}%
+\else
+ \def\@oddhead{\hbox{}\scriptsize\leftmark \hfil \thepage}%
+ \def\@evenhead{\scriptsize\thepage \hfil \leftmark\hbox{}}%
+\fi
+\ifCLASSOPTIONdraftcls
+ \def\@oddhead{\hbox{}\scriptsize\leftmark \hfil \thepage}%
+ \def\@evenhead{\scriptsize\thepage \hfil \leftmark\hbox{}}%
+ \ifCLASSOPTIONdraftclsnofoot\else
+ \def\@oddfoot{\scriptsize \@date\hfil DRAFT}%
+ \def\@evenfoot{\scriptsize DRAFT\hfil \@date}%
+ \fi
+\else
+ % all non-draft mode footers
+ \if@IEEEusingpubid
+ % for title pages that are using a pubid
+ % do not repeat pubid if using peer review option
+ \ifCLASSOPTIONpeerreview
+ \else
+ \footskip 0pt%
+ \ifCLASSOPTIONcompsoc
+ \def\@oddfoot{\hss\normalfont\scriptsize\raisebox{-1.5\@IEEEnormalsizeunitybaselineskip}[0ex][0ex]{\@IEEEpubid}\hss}%
+ \def\@evenfoot{\hss\normalfont\scriptsize\raisebox{-1.5\@IEEEnormalsizeunitybaselineskip}[0ex][0ex]{\@IEEEpubid}\hss}%
+ \else
+ \def\@oddfoot{\hss\normalfont\footnotesize\raisebox{1.5ex}[1.5ex]{\@IEEEpubid}\hss}%
+ \def\@evenfoot{\hss\normalfont\footnotesize\raisebox{1.5ex}[1.5ex]{\@IEEEpubid}\hss}%
+ \fi
+ \fi
+ \fi
+\fi}
+
+
+% peer review cover page style
+\def\ps@IEEEpeerreviewcoverpagestyle{%
+\def\@oddhead{}\def\@evenhead{}%
+\def\@oddfoot{}\def\@evenfoot{}%
+\ifCLASSOPTIONdraftcls
+ \ifCLASSOPTIONdraftclsnofoot\else
+ \def\@oddfoot{\scriptsize \@date\hfil DRAFT}%
+ \def\@evenfoot{\scriptsize DRAFT\hfil \@date}%
+ \fi
+\else
+ % non-draft mode footers
+ \if@IEEEusingpubid
+ \footskip 0pt%
+ \ifCLASSOPTIONcompsoc
+ \def\@oddfoot{\hss\normalfont\scriptsize\raisebox{-1.5\@IEEEnormalsizeunitybaselineskip}[0ex][0ex]{\@IEEEpubid}\hss}%
+ \def\@evenfoot{\hss\normalfont\scriptsize\raisebox{-1.5\@IEEEnormalsizeunitybaselineskip}[0ex][0ex]{\@IEEEpubid}\hss}%
+ \else
+ \def\@oddfoot{\hss\normalfont\footnotesize\raisebox{1.5ex}[1.5ex]{\@IEEEpubid}\hss}%
+ \def\@evenfoot{\hss\normalfont\footnotesize\raisebox{1.5ex}[1.5ex]{\@IEEEpubid}\hss}%
+ \fi
+ \fi
+\fi}
+
+
+% start with empty headings
+\def\rightmark{}\def\leftmark{}
+
+
+%% Defines the command for putting the header. \footernote{TEXT} is the same
+%% as \markboth{TEXT}{TEXT}.
+%% Note that all the text is forced into uppercase, if you have some text
+%% that needs to be in lower case, for instance et. al., then either manually
+%% set \leftmark and \rightmark or use \MakeLowercase{et. al.} within the
+%% arguments to \markboth.
+\def\markboth#1#2{\def\leftmark{\@IEEEcompsoconly{\sffamily}\MakeUppercase{#1}}%
+\def\rightmark{\@IEEEcompsoconly{\sffamily}\MakeUppercase{#2}}}
+\def\footernote#1{\markboth{#1}{#1}}
+
+\def\today{\ifcase\month\or
+ January\or February\or March\or April\or May\or June\or
+ July\or August\or September\or October\or November\or December\fi
+ \space\number\day, \number\year}
+
+
+
+
+%% CITATION AND BIBLIOGRAPHY COMMANDS
+%%
+%% V1.6 no longer supports the older, nonstandard \shortcite and \citename setup stuff
+%
+%
+% Modify Latex2e \@citex to separate citations with "], ["
+\def\@citex[#1]#2{%
+ \let\@citea\@empty
+ \@cite{\@for\@citeb:=#2\do
+ {\@citea\def\@citea{], [}%
+ \edef\@citeb{\expandafter\@firstofone\@citeb\@empty}%
+ \if@filesw\immediate\write\@auxout{\string\citation{\@citeb}}\fi
+ \@ifundefined{b@\@citeb}{\mbox{\reset@font\bfseries ?}%
+ \G@refundefinedtrue
+ \@latex@warning
+ {Citation `\@citeb' on page \thepage \space undefined}}%
+ {\hbox{\csname b@\@citeb\endcsname}}}}{#1}}
+
+% V1.6 we create hooks for the optional use of Donald Arseneau's
+% cite.sty package. cite.sty is "smart" and will notice that the
+% following format controls are already defined and will not
+% redefine them. The result will be the proper sorting of the
+% citation numbers and auto detection of 3 or more entry "ranges" -
+% all in IEEE style: [1], [2], [5]--[7], [12]
+% This also allows for an optional note, i.e., \cite[mynote]{..}.
+% If the \cite with note has more than one reference, the note will
+% be applied to the last of the listed references. It is generally
+% desired that if a note is given, only one reference is listed in
+% that \cite.
+% Thanks to Mr. Arseneau for providing the required format arguments
+% to produce the IEEE style.
+\def\citepunct{], [}
+\def\citedash{]--[}
+
+% V1.7 default to using same font for urls made by url.sty
+\AtBeginDocument{\csname url@samestyle\endcsname}
+
+% V1.6 class files should always provide these
+\def\newblock{\hskip .11em\@plus.33em\@minus.07em}
+\let\@openbib@code\@empty
+
+
+% Provide support for the control entries of IEEEtran.bst V1.00 and later.
+% V1.7 optional argument allows for a different aux file to be specified in
+% order to handle multiple bibliographies. For example, with multibib.sty:
+% \newcites{sec}{Secondary Literature}
+% \bstctlcite[@auxoutsec]{BSTcontrolhak}
+\def\bstctlcite{\@ifnextchar[{\@bstctlcite}{\@bstctlcite[@auxout]}}
+\def\@bstctlcite[#1]#2{\@bsphack
+ \@for\@citeb:=#2\do{%
+ \edef\@citeb{\expandafter\@firstofone\@citeb}%
+ \if@filesw\immediate\write\csname #1\endcsname{\string\citation{\@citeb}}\fi}%
+ \@esphack}
+
+% V1.6 provide a way for a user to execute a command just before
+% a given reference number - used to insert a \newpage to balance
+% the columns on the last page
+\edef\@IEEEtriggerrefnum{0} % the default of zero means that
+ % the command is not executed
+\def\@IEEEtriggercmd{\newpage}
+
+% allow the user to alter the triggered command
+\long\def\IEEEtriggercmd#1{\long\def\@IEEEtriggercmd{#1}}
+
+% allow user a way to specify the reference number just before the
+% command is executed
+\def\IEEEtriggeratref#1{\@IEEEtrantmpcountA=#1%
+\edef\@IEEEtriggerrefnum{\the\@IEEEtrantmpcountA}}%
+
+% trigger command at the given reference
+\def\@IEEEbibitemprefix{\@IEEEtrantmpcountA=\@IEEEtriggerrefnum\relax%
+\advance\@IEEEtrantmpcountA by -1\relax%
+\ifnum\c@enumiv=\@IEEEtrantmpcountA\relax\@IEEEtriggercmd\relax\fi}
+
+
+\def\@biblabel#1{[#1]}
+
+% compsoc journals left align the reference numbers
+\@IEEEcompsocnotconfonly{\def\@biblabel#1{[#1]\hfill}}
+
+% controls bib item spacing
+\def\IEEEbibitemsep{0pt plus .5pt}
+
+\@IEEEcompsocconfonly{\def\IEEEbibitemsep{1\baselineskip plus 0.25\baselineskip minus 0.25\baselineskip}}
+
+
+\def\thebibliography#1{\section*{\refname}%
+ \addcontentsline{toc}{section}{\refname}%
+ % V1.6 add some rubber space here and provide a command trigger
+ \footnotesize\@IEEEcompsocconfonly{\small}\vskip 0.3\baselineskip plus 0.1\baselineskip minus 0.1\baselineskip%
+ \list{\@biblabel{\@arabic\c@enumiv}}%
+ {\settowidth\labelwidth{\@biblabel{#1}}%
+ \leftmargin\labelwidth
+ \advance\leftmargin\labelsep\relax
+ \itemsep \IEEEbibitemsep\relax
+ \usecounter{enumiv}%
+ \let\p@enumiv\@empty
+ \renewcommand\theenumiv{\@arabic\c@enumiv}}%
+ \let\@IEEElatexbibitem\bibitem%
+ \def\bibitem{\@IEEEbibitemprefix\@IEEElatexbibitem}%
+\def\newblock{\hskip .11em plus .33em minus .07em}%
+% originally:
+% \sloppy\clubpenalty4000\widowpenalty4000%
+% by adding the \interlinepenalty here, we make it more
+% difficult, but not impossible, for LaTeX to break within a reference.
+% IEEE almost never breaks a reference (but they do it more often with
+% technotes). You may get an underfull vbox warning around the bibliography,
+% but the final result will be much more like what IEEE will publish.
+% MDS 11/2000
+\ifCLASSOPTIONtechnote\sloppy\clubpenalty4000\widowpenalty4000\interlinepenalty100%
+\else\sloppy\clubpenalty4000\widowpenalty4000\interlinepenalty500\fi%
+ \sfcode`\.=1000\relax}
+\let\endthebibliography=\endlist
+
+
+
+
+% TITLE PAGE COMMANDS
+%
+%
+% \IEEEmembership is used to produce the sublargesize italic font used to indicate author
+% IEEE membership. compsoc uses a large size sans slant font
+\def\IEEEmembership#1{{\@IEEEnotcompsoconly{\sublargesize}\normalfont\@IEEEcompsoconly{\sffamily}\textit{#1}}}
+
+
+% \IEEEauthorrefmark{} produces a footnote type symbol to indicate author affiliation.
+% When given an argument of 1 to 9, \IEEEauthorrefmark{} follows the standard LaTeX footnote
+% symbol sequence convention. However, for arguments 10 and above, \IEEEauthorrefmark{}
+% reverts to using lower case roman numerals, so it cannot overflow. Do note that you
+% cannot use \footnotemark[] in place of \IEEEauthorrefmark{} within \author as the footnote
+% symbols will have been turned off to prevent \thanks from creating footnote marks.
+% \IEEEauthorrefmark{} produces a symbol that appears to LaTeX as having zero vertical
+% height - this allows for a more compact line packing, but the user must ensure that
+% the interline spacing is large enough to prevent \IEEEauthorrefmark{} from colliding
+% with the text above.
+% V1.7 make this a robust command
+\DeclareRobustCommand*{\IEEEauthorrefmark}[1]{\raisebox{0pt}[0pt][0pt]{\textsuperscript{\footnotesize\ensuremath{\ifcase#1\or *\or \dagger\or \ddagger\or%
+ \mathsection\or \mathparagraph\or \|\or **\or \dagger\dagger%
+ \or \ddagger\ddagger \else\textsuperscript{\expandafter\romannumeral#1}\fi}}}}
+
+
+% FONT CONTROLS AND SPACINGS FOR CONFERENCE MODE AUTHOR NAME AND AFFILIATION BLOCKS
+%
+% The default font styles for the author name and affiliation blocks (confmode)
+\def\@IEEEauthorblockNstyle{\normalfont\@IEEEcompsocnotconfonly{\sffamily}\sublargesize\@IEEEcompsocconfonly{\large}}
+\def\@IEEEauthorblockAstyle{\normalfont\@IEEEcompsocnotconfonly{\sffamily}\@IEEEcompsocconfonly{\itshape}\normalsize\@IEEEcompsocconfonly{\large}}
+% The default if the user does not use an author block
+\def\@IEEEauthordefaulttextstyle{\normalfont\@IEEEcompsocnotconfonly{\sffamily}\sublargesize}
+
+% spacing from title (or special paper notice) to author name blocks (confmode)
+% can be negative
+\def\@IEEEauthorblockconfadjspace{-0.25em}
+% compsoc conferences need more space here
+\@IEEEcompsocconfonly{\def\@IEEEauthorblockconfadjspace{0.75\@IEEEnormalsizeunitybaselineskip}}
+
+% spacing between name and affiliation blocks (confmode)
+% This can be negative.
+% IEEE doesn't want any added spacing here, but I will leave these
+% controls in place in case they ever change their mind.
+% Personally, I like 0.75ex.
+%\def\@IEEEauthorblockNtopspace{0.75ex}
+%\def\@IEEEauthorblockAtopspace{0.75ex}
+\def\@IEEEauthorblockNtopspace{0.0ex}
+\def\@IEEEauthorblockAtopspace{0.0ex}
+% baseline spacing within name and affiliation blocks (confmode)
+% must be positive, spacings below certain values will make
+% the position of line of text sensitive to the contents of the
+% line above it i.e., whether or not the prior line has descenders,
+% subscripts, etc. For this reason it is a good idea to keep
+% these above 2.6ex
+\def\@IEEEauthorblockNinterlinespace{2.6ex}
+\def\@IEEEauthorblockAinterlinespace{2.75ex}
+
+% This tracks the required strut size.
+% See the \@IEEEauthorhalign command for the actual default value used.
+\def\@IEEEauthorblockXinterlinespace{2.7ex}
+
+% variables to retain font size and style across groups
+% values given here have no effect as they will be overwritten later
+\gdef\@IEEESAVESTATEfontsize{10}
+\gdef\@IEEESAVESTATEfontbaselineskip{12}
+\gdef\@IEEESAVESTATEfontencoding{OT1}
+\gdef\@IEEESAVESTATEfontfamily{ptm}
+\gdef\@IEEESAVESTATEfontseries{m}
+\gdef\@IEEESAVESTATEfontshape{n}
+
+% saves the current font attributes
+\def\@IEEEcurfontSAVE{\global\let\@IEEESAVESTATEfontsize\f@size%
+\global\let\@IEEESAVESTATEfontbaselineskip\f@baselineskip%
+\global\let\@IEEESAVESTATEfontencoding\f@encoding%
+\global\let\@IEEESAVESTATEfontfamily\f@family%
+\global\let\@IEEESAVESTATEfontseries\f@series%
+\global\let\@IEEESAVESTATEfontshape\f@shape}
+
+% restores the saved font attributes
+\def\@IEEEcurfontRESTORE{\fontsize{\@IEEESAVESTATEfontsize}{\@IEEESAVESTATEfontbaselineskip}%
+\fontencoding{\@IEEESAVESTATEfontencoding}%
+\fontfamily{\@IEEESAVESTATEfontfamily}%
+\fontseries{\@IEEESAVESTATEfontseries}%
+\fontshape{\@IEEESAVESTATEfontshape}%
+\selectfont}
+
+
+% variable to indicate if the current block is the first block in the column
+\newif\if@IEEEprevauthorblockincol \@IEEEprevauthorblockincolfalse
+
+
+% the command places a strut with height and depth = \@IEEEauthorblockXinterlinespace
+% we use this technique to have complete manual control over the spacing of the lines
+% within the halign environment.
+% We set the below baseline portion at 30%, the above
+% baseline portion at 70% of the total length.
+% Responds to changes in the document's \baselinestretch
+\def\@IEEEauthorstrutrule{\@IEEEtrantmpdimenA\@IEEEauthorblockXinterlinespace%
+\@IEEEtrantmpdimenA=\baselinestretch\@IEEEtrantmpdimenA%
+\rule[-0.3\@IEEEtrantmpdimenA]{0pt}{\@IEEEtrantmpdimenA}}
+
+
+% blocks to hold the authors' names and affilations.
+% Makes formatting easy for conferences
+%
+% use real definitions in conference mode
+% name block
+\def\IEEEauthorblockN#1{\relax\@IEEEauthorblockNstyle% set the default text style
+\gdef\@IEEEauthorblockXinterlinespace{0pt}% disable strut for spacer row
+% the \expandafter hides the \cr in conditional tex, see the array.sty docs
+% for details, probably not needed here as the \cr is in a macro
+% do a spacer row if needed
+\if@IEEEprevauthorblockincol\expandafter\@IEEEauthorblockNtopspaceline\fi
+\global\@IEEEprevauthorblockincoltrue% we now have a block in this column
+%restore the correct strut value
+\gdef\@IEEEauthorblockXinterlinespace{\@IEEEauthorblockNinterlinespace}%
+% input the author names
+#1%
+% end the row if the user did not already
+\crcr}
+% spacer row for names
+\def\@IEEEauthorblockNtopspaceline{\cr\noalign{\vskip\@IEEEauthorblockNtopspace}}
+%
+% affiliation block
+\def\IEEEauthorblockA#1{\relax\@IEEEauthorblockAstyle% set the default text style
+\gdef\@IEEEauthorblockXinterlinespace{0pt}%disable strut for spacer row
+% the \expandafter hides the \cr in conditional tex, see the array.sty docs
+% for details, probably not needed here as the \cr is in a macro
+% do a spacer row if needed
+\if@IEEEprevauthorblockincol\expandafter\@IEEEauthorblockAtopspaceline\fi
+\global\@IEEEprevauthorblockincoltrue% we now have a block in this column
+%restore the correct strut value
+\gdef\@IEEEauthorblockXinterlinespace{\@IEEEauthorblockAinterlinespace}%
+% input the author affiliations
+#1%
+% end the row if the user did not already
+\crcr}
+% spacer row for affiliations
+\def\@IEEEauthorblockAtopspaceline{\cr\noalign{\vskip\@IEEEauthorblockAtopspace}}
+
+
+% allow papers to compile even if author blocks are used in modes other
+% than conference or peerreviewca. For such cases, we provide dummy blocks.
+\ifCLASSOPTIONconference
+\else
+ \ifCLASSOPTIONpeerreviewca\else
+ % not conference or peerreviewca mode
+ \def\IEEEauthorblockN#1{#1}%
+ \def\IEEEauthorblockA#1{#1}%
+ \fi
+\fi
+
+
+
+% we provide our own halign so as not to have to depend on tabular
+\def\@IEEEauthorhalign{\@IEEEauthordefaulttextstyle% default text style
+ \lineskip=0pt\relax% disable line spacing
+ \lineskiplimit=0pt\relax%
+ \baselineskip=0pt\relax%
+ \@IEEEcurfontSAVE% save the current font
+ \mathsurround\z@\relax% no extra spacing around math
+ \let\\\@IEEEauthorhaligncr% replace newline with halign friendly one
+ \tabskip=0pt\relax% no column spacing
+ \everycr{}% ensure no problems here
+ \@IEEEprevauthorblockincolfalse% no author blocks yet
+ \def\@IEEEauthorblockXinterlinespace{2.7ex}% default interline space
+ \vtop\bgroup%vtop box
+ \halign\bgroup&\relax\hfil\@IEEEcurfontRESTORE\relax ##\relax
+ \hfil\@IEEEcurfontSAVE\@IEEEauthorstrutrule\cr}
+
+% ensure last line, exit from halign, close vbox
+\def\end@IEEEauthorhalign{\crcr\egroup\egroup}
+
+% handle bogus star form
+\def\@IEEEauthorhaligncr{{\ifnum0=`}\fi\@ifstar{\@@IEEEauthorhaligncr}{\@@IEEEauthorhaligncr}}
+
+% test and setup the optional argument to \\[]
+\def\@@IEEEauthorhaligncr{\@testopt\@@@IEEEauthorhaligncr\z@skip}
+
+% end the line and do the optional spacer
+\def\@@@IEEEauthorhaligncr[#1]{\ifnum0=`{\fi}\cr\noalign{\vskip#1\relax}}
+
+
+
+% flag to prevent multiple \and warning messages
+\newif\if@IEEEWARNand
+\@IEEEWARNandtrue
+
+% if in conference or peerreviewca modes, we support the use of \and as \author is a
+% tabular environment, otherwise we warn the user that \and is invalid
+% outside of conference or peerreviewca modes.
+\def\and{\relax} % provide a bogus \and that we will then override
+
+\renewcommand{\and}[1][\relax]{\if@IEEEWARNand\typeout{** WARNING: \noexpand\and is valid only
+ when in conference or peerreviewca}\typeout{modes (line \the\inputlineno).}\fi\global\@IEEEWARNandfalse}
+
+\ifCLASSOPTIONconference%
+\renewcommand{\and}[1][\hfill]{\end{@IEEEauthorhalign}#1\begin{@IEEEauthorhalign}}%
+\fi
+\ifCLASSOPTIONpeerreviewca
+\renewcommand{\and}[1][\hfill]{\end{@IEEEauthorhalign}#1\begin{@IEEEauthorhalign}}%
+\fi
+
+
+% page clearing command
+% based on LaTeX2e's \cleardoublepage, but allows different page styles
+% for the inserted blank pages
+\def\@IEEEcleardoublepage#1{\clearpage\if@twoside\ifodd\c@page\else
+\hbox{}\thispagestyle{#1}\newpage\if@twocolumn\hbox{}\thispagestyle{#1}\newpage\fi\fi\fi}
+
+
+% user command to invoke the title page
+\def\maketitle{\par%
+ \begingroup%
+ \normalfont%
+ \def\thefootnote{}% the \thanks{} mark type is empty
+ \def\footnotemark{}% and kill space from \thanks within author
+ \let\@makefnmark\relax% V1.7, must *really* kill footnotemark to remove all \textsuperscript spacing as well.
+ \footnotesize% equal spacing between thanks lines
+ \footnotesep 0.7\baselineskip%see global setting of \footnotesep for more info
+ % V1.7 disable \thanks note indention for compsoc
+ \@IEEEcompsoconly{\long\def\@makefntext##1{\parindent 1em\noindent\hbox{\@makefnmark}##1}}%
+ \normalsize%
+ \ifCLASSOPTIONpeerreview
+ \newpage\global\@topnum\z@ \@maketitle\@IEEEstatictitlevskip\@IEEEaftertitletext%
+ \thispagestyle{IEEEpeerreviewcoverpagestyle}\@thanks%
+ \else
+ \if@twocolumn%
+ \ifCLASSOPTIONtechnote%
+ \newpage\global\@topnum\z@ \@maketitle\@IEEEstatictitlevskip\@IEEEaftertitletext%
+ \else
+ \twocolumn[\@maketitle\@IEEEdynamictitlevspace\@IEEEaftertitletext]%
+ \fi
+ \else
+ \newpage\global\@topnum\z@ \@maketitle\@IEEEstatictitlevskip\@IEEEaftertitletext%
+ \fi
+ \thispagestyle{IEEEtitlepagestyle}\@thanks%
+ \fi
+ % pullup page for pubid if used.
+ \if@IEEEusingpubid
+ \enlargethispage{-\@IEEEpubidpullup}%
+ \fi
+ \endgroup
+ \setcounter{footnote}{0}\let\maketitle\relax\let\@maketitle\relax
+ \gdef\@thanks{}%
+ % v1.6b do not clear these as we will need the title again for peer review papers
+ % \gdef\@author{}\gdef\@title{}%
+ \let\thanks\relax}
+
+
+
+% V1.7 parbox to format \@IEEEcompsoctitleabstractindextext
+\long\def\@IEEEcompsoctitleabstractindextextbox#1{\parbox{0.915\textwidth}{#1}}
+
+% formats the Title, authors names, affiliations and special paper notice
+% THIS IS A CONTROLLED SPACING COMMAND! Do not allow blank lines or unintentional
+% spaces to enter the definition - use % at the end of each line
+\def\@maketitle{\newpage
+\begin{center}%
+\ifCLASSOPTIONtechnote% technotes
+ {\bfseries\large\@IEEEcompsoconly{\sffamily}\@title\par}\vskip 1.3em{\lineskip .5em\@IEEEcompsoconly{\sffamily}\@author
+ \@IEEEspecialpapernotice\par{\@IEEEcompsoconly{\vskip 1.5em\relax
+ \@IEEEcompsoctitleabstractindextextbox{\@IEEEcompsoctitleabstractindextext}\par
+ \hfill\@IEEEcompsocdiamondline\hfill\hbox{}\par}}}\relax
+\else% not a technote
+ \vskip0.2em{\Huge\@IEEEcompsoconly{\sffamily}\@IEEEcompsocconfonly{\normalfont\normalsize\vskip 2\@IEEEnormalsizeunitybaselineskip
+ \bfseries\Large}\@title\par}\vskip1.0em\par%
+ % V1.6 handle \author differently if in conference mode
+ \ifCLASSOPTIONconference%
+ {\@IEEEspecialpapernotice\mbox{}\vskip\@IEEEauthorblockconfadjspace%
+ \mbox{}\hfill\begin{@IEEEauthorhalign}\@author\end{@IEEEauthorhalign}\hfill\mbox{}\par}\relax
+ \else% peerreviewca, peerreview or journal
+ \ifCLASSOPTIONpeerreviewca
+ % peerreviewca handles author names just like conference mode
+ {\@IEEEcompsoconly{\sffamily}\@IEEEspecialpapernotice\mbox{}\vskip\@IEEEauthorblockconfadjspace%
+ \mbox{}\hfill\begin{@IEEEauthorhalign}\@author\end{@IEEEauthorhalign}\hfill\mbox{}\par
+ {\@IEEEcompsoconly{\vskip 1.5em\relax
+ \@IEEEcompsoctitleabstractindextextbox{\@IEEEcompsoctitleabstractindextext}\par\hfill
+ \@IEEEcompsocdiamondline\hfill\hbox{}\par}}}\relax
+ \else% journal or peerreview
+ {\lineskip.5em\@IEEEcompsoconly{\sffamily}\sublargesize\@author\@IEEEspecialpapernotice\par
+ {\@IEEEcompsoconly{\vskip 1.5em\relax
+ \@IEEEcompsoctitleabstractindextextbox{\@IEEEcompsoctitleabstractindextext}\par\hfill
+ \@IEEEcompsocdiamondline\hfill\hbox{}\par}}}\relax
+ \fi
+ \fi
+\fi\end{center}}
+
+
+
+% V1.7 Computer Society "diamond line" which follows index terms for nonconference papers
+\def\@IEEEcompsocdiamondline{\vrule depth 0pt height 0.5pt width 4cm\hspace{7.5pt}%
+\raisebox{-3.5pt}{\fontfamily{pzd}\fontencoding{U}\fontseries{m}\fontshape{n}\fontsize{11}{12}\selectfont\char70}%
+\hspace{7.5pt}\vrule depth 0pt height 0.5pt width 4cm\relax}
+
+% V1.7 standard LateX2e \thanks, but with \itshape under compsoc. Also make it a \long\def
+% We also need to trigger the one-shot footnote rule
+\def\@IEEEtriggeroneshotfootnoterule{\global\@IEEEenableoneshotfootnoteruletrue}
+
+
+\long\def\thanks#1{\footnotemark
+ \protected@xdef\@thanks{\@thanks
+ \protect\footnotetext[\the\c@footnote]{\@IEEEcompsoconly{\itshape
+ \protect\@IEEEtriggeroneshotfootnoterule\relax}\ignorespaces#1}}}
+\let\@thanks\@empty
+
+% V1.7 allow \author to contain \par's. This is needed to allow \thanks to contain \par.
+\long\def\author#1{\gdef\@author{#1}}
+
+
+% in addition to setting up IEEEitemize, we need to remove a baselineskip space above and
+% below it because \list's \pars introduce blank lines because of the footnote struts.
+\def\@IEEEsetupcompsocitemizelist{\def\labelitemi{$\bullet$}%
+\setlength{\IEEElabelindent}{0pt}\setlength{\parskip}{0pt}%
+\setlength{\partopsep}{0pt}\setlength{\topsep}{0.5\baselineskip}\vspace{-1\baselineskip}\relax}
+
+
+% flag for fake non-compsoc \IEEEcompsocthanksitem - prevents line break on very first item
+\newif\if@IEEEbreakcompsocthanksitem \@IEEEbreakcompsocthanksitemfalse
+
+\ifCLASSOPTIONcompsoc
+% V1.7 compsoc bullet item \thanks
+% also, we need to redefine this to destroy the argument in \@IEEEdynamictitlevspace
+\long\def\IEEEcompsocitemizethanks#1{\relax\@IEEEbreakcompsocthanksitemfalse\footnotemark
+ \protected@xdef\@thanks{\@thanks
+ \protect\footnotetext[\the\c@footnote]{\itshape\protect\@IEEEtriggeroneshotfootnoterule
+ {\let\IEEEiedlistdecl\relax\protect\begin{IEEEitemize}[\protect\@IEEEsetupcompsocitemizelist]\ignorespaces#1\relax
+ \protect\end{IEEEitemize}}\protect\vspace{-1\baselineskip}}}}
+\DeclareRobustCommand*{\IEEEcompsocthanksitem}{\item}
+\else
+% non-compsoc, allow for dual compilation via rerouting to normal \thanks
+\long\def\IEEEcompsocitemizethanks#1{\thanks{#1}}
+% redirect to "pseudo-par" \hfil\break\indent after swallowing [] from \IEEEcompsocthanksitem[]
+\DeclareRobustCommand{\IEEEcompsocthanksitem}{\@ifnextchar [{\@IEEEthanksswallowoptionalarg}%
+{\@IEEEthanksswallowoptionalarg[\relax]}}
+% be sure and break only after first item, be sure and ignore spaces after optional argument
+\def\@IEEEthanksswallowoptionalarg[#1]{\relax\if@IEEEbreakcompsocthanksitem\hfil\break
+\indent\fi\@IEEEbreakcompsocthanksitemtrue\ignorespaces}
+\fi
+
+
+% V1.6b define the \IEEEpeerreviewmaketitle as needed
+\ifCLASSOPTIONpeerreview
+\def\IEEEpeerreviewmaketitle{\@IEEEcleardoublepage{empty}%
+\ifCLASSOPTIONtwocolumn
+\twocolumn[\@IEEEpeerreviewmaketitle\@IEEEdynamictitlevspace]
+\else
+\newpage\@IEEEpeerreviewmaketitle\@IEEEstatictitlevskip
+\fi
+\thispagestyle{IEEEtitlepagestyle}}
+\else
+% \IEEEpeerreviewmaketitle does nothing if peer review option has not been selected
+\def\IEEEpeerreviewmaketitle{\relax}
+\fi
+
+% peerreview formats the repeated title like the title in journal papers.
+\def\@IEEEpeerreviewmaketitle{\begin{center}\@IEEEcompsoconly{\sffamily}%
+\normalfont\normalsize\vskip0.2em{\Huge\@title\par}\vskip1.0em\par
+\end{center}}
+
+
+
+% V1.6
+% this is a static rubber spacer between the title/authors and the main text
+% used for single column text, or when the title appears in the first column
+% of two column text (technotes).
+\def\@IEEEstatictitlevskip{{\normalfont\normalsize
+% adjust spacing to next text
+% v1.6b handle peer review papers
+\ifCLASSOPTIONpeerreview
+% for peer review papers, the same value is used for both title pages
+% regardless of the other paper modes
+ \vskip 1\baselineskip plus 0.375\baselineskip minus 0.1875\baselineskip
+\else
+ \ifCLASSOPTIONconference% conference
+ \vskip 1\baselineskip plus 0.375\baselineskip minus 0.1875\baselineskip%
+ \else%
+ \ifCLASSOPTIONtechnote% technote
+ \vskip 1\baselineskip plus 0.375\baselineskip minus 0.1875\baselineskip%
+ \else% journal uses more space
+ \vskip 2.5\baselineskip plus 0.75\baselineskip minus 0.375\baselineskip%
+ \fi
+ \fi
+\fi}}
+
+
+% V1.6
+% This is a dynamically determined rigid spacer between the title/authors
+% and the main text. This is used only for single column titles over two
+% column text (most common)
+% This is bit tricky because we have to ensure that the textheight of the
+% main text is an integer multiple of \baselineskip
+% otherwise underfull vbox problems may develop in the second column of the
+% text on the titlepage
+% The possible use of \IEEEpubid must also be taken into account.
+\def\@IEEEdynamictitlevspace{{%
+ % we run within a group so that all the macros can be forgotten when we are done
+ \long\def\thanks##1{\relax}%don't allow \thanks to run when we evaluate the vbox height
+ \long\def\IEEEcompsocitemizethanks##1{\relax}%don't allow \IEEEcompsocitemizethanks to run when we evaluate the vbox height
+ \normalfont\normalsize% we declare more descriptive variable names
+ \let\@IEEEmaintextheight=\@IEEEtrantmpdimenA%height of the main text columns
+ \let\@IEEEINTmaintextheight=\@IEEEtrantmpdimenB%height of the main text columns with integer # lines
+ % set the nominal and minimum values for the title spacer
+ % the dynamic algorithm will not allow the spacer size to
+ % become less than \@IEEEMINtitlevspace - instead it will be
+ % lengthened
+ % default to journal values
+ \def\@IEEENORMtitlevspace{2.5\baselineskip}%
+ \def\@IEEEMINtitlevspace{2\baselineskip}%
+ % conferences and technotes need tighter spacing
+ \ifCLASSOPTIONconference%conference
+ \def\@IEEENORMtitlevspace{1\baselineskip}%
+ \def\@IEEEMINtitlevspace{0.75\baselineskip}%
+ \fi
+ \ifCLASSOPTIONtechnote%technote
+ \def\@IEEENORMtitlevspace{1\baselineskip}%
+ \def\@IEEEMINtitlevspace{0.75\baselineskip}%
+ \fi%
+ % get the height that the title will take up
+ \ifCLASSOPTIONpeerreview
+ \settoheight{\@IEEEmaintextheight}{\vbox{\hsize\textwidth \@IEEEpeerreviewmaketitle}}%
+ \else
+ \settoheight{\@IEEEmaintextheight}{\vbox{\hsize\textwidth \@maketitle}}%
+ \fi
+ \@IEEEmaintextheight=-\@IEEEmaintextheight% title takes away from maintext, so reverse sign
+ % add the height of the page textheight
+ \advance\@IEEEmaintextheight by \textheight%
+ % correct for title pages using pubid
+ \ifCLASSOPTIONpeerreview\else
+ % peerreview papers use the pubid on the cover page only.
+ % And the cover page uses a static spacer.
+ \if@IEEEusingpubid\advance\@IEEEmaintextheight by -\@IEEEpubidpullup\fi
+ \fi%
+ % subtract off the nominal value of the title bottom spacer
+ \advance\@IEEEmaintextheight by -\@IEEENORMtitlevspace%
+ % \topskip takes away some too
+ \advance\@IEEEmaintextheight by -\topskip%
+ % calculate the column height of the main text for lines
+ % now we calculate the main text height as if holding
+ % an integer number of \normalsize lines after the first
+ % and discard any excess fractional remainder
+ % we subtracted the first line, because the first line
+ % is placed \topskip into the maintext, not \baselineskip like the
+ % rest of the lines.
+ \@IEEEINTmaintextheight=\@IEEEmaintextheight%
+ \divide\@IEEEINTmaintextheight by \baselineskip%
+ \multiply\@IEEEINTmaintextheight by \baselineskip%
+ % now we calculate how much the title spacer height will
+ % have to be reduced from nominal (\@IEEEREDUCEmaintextheight is always
+ % a positive value) so that the maintext area will contain an integer
+ % number of normal size lines
+ % we change variable names here (to avoid confusion) as we no longer
+ % need \@IEEEINTmaintextheight and can reuse its dimen register
+ \let\@IEEEREDUCEmaintextheight=\@IEEEINTmaintextheight%
+ \advance\@IEEEREDUCEmaintextheight by -\@IEEEmaintextheight%
+ \advance\@IEEEREDUCEmaintextheight by \baselineskip%
+ % this is the calculated height of the spacer
+ % we change variable names here (to avoid confusion) as we no longer
+ % need \@IEEEmaintextheight and can reuse its dimen register
+ \let\@IEEECOMPENSATElen=\@IEEEmaintextheight%
+ \@IEEECOMPENSATElen=\@IEEENORMtitlevspace% set the nominal value
+ % we go with the reduced length if it is smaller than an increase
+ \ifdim\@IEEEREDUCEmaintextheight < 0.5\baselineskip\relax%
+ \advance\@IEEECOMPENSATElen by -\@IEEEREDUCEmaintextheight%
+ % if the resulting spacer is too small back out and go with an increase instead
+ \ifdim\@IEEECOMPENSATElen<\@IEEEMINtitlevspace\relax%
+ \advance\@IEEECOMPENSATElen by \baselineskip%
+ \fi%
+ \else%
+ % go with an increase because it is closer to the nominal than a decrease
+ \advance\@IEEECOMPENSATElen by -\@IEEEREDUCEmaintextheight%
+ \advance\@IEEECOMPENSATElen by \baselineskip%
+ \fi%
+ % set the calculated rigid spacer
+ \vspace{\@IEEECOMPENSATElen}}}
+
+
+
+% V1.6
+% we allow the user access to the last part of the title area
+% useful in emergencies such as when a different spacing is needed
+% This text is NOT compensated for in the dynamic sizer.
+\let\@IEEEaftertitletext=\relax
+\long\def\IEEEaftertitletext#1{\def\@IEEEaftertitletext{#1}}
+
+% V1.7 provide a way for users to enter abstract and keywords
+% into the onecolumn title are. This text is compensated for
+% in the dynamic sizer.
+\let\@IEEEcompsoctitleabstractindextext=\relax
+\long\def\IEEEcompsoctitleabstractindextext#1{\def\@IEEEcompsoctitleabstractindextext{#1}}
+% V1.7 provide a way for users to get the \@IEEEcompsoctitleabstractindextext if
+% not in compsoc journal mode - this way abstract and keywords can be placed
+% in their conventional position if not in compsoc mode.
+\def\IEEEdisplaynotcompsoctitleabstractindextext{%
+\ifCLASSOPTIONcompsoc% display if compsoc conf
+\ifCLASSOPTIONconference\@IEEEcompsoctitleabstractindextext\fi
+\else% or if not compsoc
+\@IEEEcompsoctitleabstractindextext\fi}
+
+
+% command to allow alteration of baselinestretch, but only if the current
+% baselineskip is unity. Used to tweak the compsoc abstract and keywords line spacing.
+\def\@IEEEtweakunitybaselinestretch#1{{\def\baselinestretch{1}\selectfont
+\global\@tempskipa\baselineskip}\ifnum\@tempskipa=\baselineskip%
+\def\baselinestretch{#1}\selectfont\fi\relax}
+
+
+% abstract and keywords are in \small, except
+% for 9pt docs in which they are in \footnotesize
+% Because 9pt docs use an 8pt footnotesize, \small
+% becomes a rather awkward 8.5pt
+\def\@IEEEabskeysecsize{\small}
+\ifx\CLASSOPTIONpt\@IEEEptsizenine
+ \def\@IEEEabskeysecsize{\footnotesize}
+\fi
+
+% compsoc journals use \footnotesize, compsoc conferences use normalsize
+\@IEEEcompsoconly{\def\@IEEEabskeysecsize{\footnotesize}}
+\@IEEEcompsocconfonly{\def\@IEEEabskeysecsize{\normalsize}}
+
+
+
+
+% V1.6 have abstract and keywords strip leading spaces, pars and newlines
+% so that spacing is more tightly controlled.
+\def\abstract{\normalfont
+ \if@twocolumn
+ \@IEEEabskeysecsize\bfseries\textit{\abstractname}---\relax
+ \else
+ \begin{center}\vspace{-1.78ex}\@IEEEabskeysecsize\textbf{\abstractname}\end{center}\quotation\@IEEEabskeysecsize
+ \fi\@IEEEgobbleleadPARNLSP}
+% V1.6 IEEE wants only 1 pica from end of abstract to introduction heading when in
+% conference mode (the heading already has this much above it)
+\def\endabstract{\relax\ifCLASSOPTIONconference\vspace{0ex}\else\vspace{1.34ex}\fi\par\if@twocolumn\else\endquotation\fi
+ \normalfont\normalsize}
+
+\def\IEEEkeywords{\normalfont
+ \if@twocolumn
+ \@IEEEabskeysecsize\bfseries\textit{\IEEEkeywordsname}---\relax
+ \else
+ \begin{center}\@IEEEabskeysecsize\textbf{\IEEEkeywordsname}\end{center}\quotation\@IEEEabskeysecsize
+ \fi\@IEEEgobbleleadPARNLSP}
+\def\endIEEEkeywords{\relax\ifCLASSOPTIONtechnote\vspace{1.34ex}\else\vspace{0.67ex}\fi
+ \par\if@twocolumn\else\endquotation\fi%
+ \normalfont\normalsize}
+
+% V1.7 compsoc keywords index terms
+\ifCLASSOPTIONcompsoc
+ \ifCLASSOPTIONconference% compsoc conference
+\def\abstract{\normalfont
+ \begin{center}\@IEEEabskeysecsize\textbf{\large\abstractname}\end{center}\vskip 0.5\baselineskip plus 0.1\baselineskip minus 0.1\baselineskip
+ \if@twocolumn\else\quotation\fi\itshape\@IEEEabskeysecsize%
+ \par\@IEEEgobbleleadPARNLSP}
+\def\IEEEkeywords{\normalfont\vskip 1.5\baselineskip plus 0.25\baselineskip minus 0.25\baselineskip
+ \begin{center}\@IEEEabskeysecsize\textbf{\large\IEEEkeywordsname}\end{center}\vskip 0.5\baselineskip plus 0.1\baselineskip minus 0.1\baselineskip
+ \if@twocolumn\else\quotation\fi\itshape\@IEEEabskeysecsize%
+ \par\@IEEEgobbleleadPARNLSP}
+ \else% compsoc not conference
+\def\abstract{\normalfont\@IEEEtweakunitybaselinestretch{1.15}\sffamily
+ \if@twocolumn
+ \@IEEEabskeysecsize\noindent\textbf{\abstractname}---\relax
+ \else
+ \begin{center}\vspace{-1.78ex}\@IEEEabskeysecsize\textbf{\abstractname}\end{center}\quotation\@IEEEabskeysecsize%
+ \fi\@IEEEgobbleleadPARNLSP}
+\def\IEEEkeywords{\normalfont\@IEEEtweakunitybaselinestretch{1.15}\sffamily
+ \if@twocolumn
+ \@IEEEabskeysecsize\vskip 0.5\baselineskip plus 0.25\baselineskip minus 0.25\baselineskip\noindent
+ \textbf{\IEEEkeywordsname}---\relax
+ \else
+ \begin{center}\@IEEEabskeysecsize\textbf{\IEEEkeywordsname}\end{center}\quotation\@IEEEabskeysecsize%
+ \fi\@IEEEgobbleleadPARNLSP}
+ \fi
+\fi
+
+
+
+% gobbles all leading \, \\ and \par, upon finding first token that
+% is not a \ , \\ or a \par, it ceases and returns that token
+%
+% used to strip leading \, \\ and \par from the input
+% so that such things in the beginning of an environment will not
+% affect the formatting of the text
+\long\def\@IEEEgobbleleadPARNLSP#1{\let\@IEEEswallowthistoken=0%
+\let\@IEEEgobbleleadPARNLSPtoken#1%
+\let\@IEEEgobbleleadPARtoken=\par%
+\let\@IEEEgobbleleadNLtoken=\\%
+\let\@IEEEgobbleleadSPtoken=\ %
+\def\@IEEEgobbleleadSPMACRO{\ }%
+\ifx\@IEEEgobbleleadPARNLSPtoken\@IEEEgobbleleadPARtoken%
+\let\@IEEEswallowthistoken=1%
+\fi%
+\ifx\@IEEEgobbleleadPARNLSPtoken\@IEEEgobbleleadNLtoken%
+\let\@IEEEswallowthistoken=1%
+\fi%
+\ifx\@IEEEgobbleleadPARNLSPtoken\@IEEEgobbleleadSPtoken%
+\let\@IEEEswallowthistoken=1%
+\fi%
+% a control space will come in as a macro
+% when it is the last one on a line
+\ifx\@IEEEgobbleleadPARNLSPtoken\@IEEEgobbleleadSPMACRO%
+\let\@IEEEswallowthistoken=1%
+\fi%
+% if we have to swallow this token, do so and taste the next one
+% else spit it out and stop gobbling
+\ifx\@IEEEswallowthistoken 1\let\@IEEEnextgobbleleadPARNLSP=\@IEEEgobbleleadPARNLSP\else%
+\let\@IEEEnextgobbleleadPARNLSP=#1\fi%
+\@IEEEnextgobbleleadPARNLSP}%
+
+
+
+
+% TITLING OF SECTIONS
+\def\@IEEEsectpunct{:\ \,} % Punctuation after run-in section heading (headings which are
+ % part of the paragraphs), need little bit more than a single space
+ % spacing from section number to title
+% compsoc conferences use regular period/space punctuation
+\ifCLASSOPTIONcompsoc
+\ifCLASSOPTIONconference
+\def\@IEEEsectpunct{.\ }
+\fi\fi
+
+
+\def\@seccntformat#1{\csname the#1dis\endcsname\hskip 0.5em\relax}
+
+\ifCLASSOPTIONcompsoc
+% compsoc journals need extra spacing
+\ifCLASSOPTIONconference\else
+\def\@seccntformat#1{\csname the#1dis\endcsname\hskip 1em\relax}
+\fi\fi
+
+%v1.7 put {} after #6 to allow for some types of user font control
+%and use \@@par rather than \par
+\def\@sect#1#2#3#4#5#6[#7]#8{%
+ \ifnum #2>\c@secnumdepth
+ \let\@svsec\@empty
+ \else
+ \refstepcounter{#1}%
+ % load section label and spacer into \@svsec
+ \protected@edef\@svsec{\@seccntformat{#1}\relax}%
+ \fi%
+ \@tempskipa #5\relax
+ \ifdim \@tempskipa>\z@% tempskipa determines whether is treated as a high
+ \begingroup #6{\relax% or low level heading
+ \noindent % subsections are NOT indented
+ % print top level headings. \@svsec is label, #8 is heading title
+ % IEEE does not block indent the section title text, it flows like normal
+ {\hskip #3\relax\@svsec}{\interlinepenalty \@M #8\@@par}}%
+ \endgroup
+ \addcontentsline{toc}{#1}{\ifnum #2>\c@secnumdepth\relax\else
+ \protect\numberline{\csname the#1\endcsname}\fi#7}%
+ \else % printout low level headings
+ % svsechd seems to swallow the trailing space, protect it with \mbox{}
+ % got rid of sectionmark stuff
+ \def\@svsechd{#6{\hskip #3\relax\@svsec #8\@IEEEsectpunct\mbox{}}%
+ \addcontentsline{toc}{#1}{\ifnum #2>\c@secnumdepth\relax\else
+ \protect\numberline{\csname the#1\endcsname}\fi#7}}%
+ \fi%skip down
+ \@xsect{#5}}
+
+
+% section* handler
+%v1.7 put {} after #4 to allow for some types of user font control
+%and use \@@par rather than \par
+\def\@ssect#1#2#3#4#5{\@tempskipa #3\relax
+ \ifdim \@tempskipa>\z@
+ %\begingroup #4\@hangfrom{\hskip #1}{\interlinepenalty \@M #5\par}\endgroup
+ % IEEE does not block indent the section title text, it flows like normal
+ \begingroup \noindent #4{\relax{\hskip #1}{\interlinepenalty \@M #5\@@par}}\endgroup
+ % svsechd swallows the trailing space, protect it with \mbox{}
+ \else \def\@svsechd{#4{\hskip #1\relax #5\@IEEEsectpunct\mbox{}}}\fi
+ \@xsect{#3}}
+
+
+%% SECTION heading spacing and font
+%%
+% arguments are: #1 - sectiontype name
+% (for \@sect) #2 - section level
+% #3 - section heading indent
+% #4 - top separation (absolute value used, neg indicates not to indent main text)
+% If negative, make stretch parts negative too!
+% #5 - (absolute value used) positive: bottom separation after heading,
+% negative: amount to indent main text after heading
+% Both #4 and #5 negative means to indent main text and use negative top separation
+% #6 - font control
+% You've got to have \normalfont\normalsize in the font specs below to prevent
+% trouble when you do something like:
+% \section{Note}{\ttfamily TT-TEXT} is known to ...
+% IEEE sometimes REALLY stretches the area before a section
+% heading by up to about 0.5in. However, it may not be a good
+% idea to let LaTeX have quite this much rubber.
+\ifCLASSOPTIONconference%
+% IEEE wants section heading spacing to decrease for conference mode
+\def\section{\@startsection{section}{1}{\z@}{1.5ex plus 1.5ex minus 0.5ex}%
+{0.7ex plus 1ex minus 0ex}{\normalfont\normalsize\centering\scshape}}%
+\def\subsection{\@startsection{subsection}{2}{\z@}{1.5ex plus 1.5ex minus 0.5ex}%
+{0.7ex plus .5ex minus 0ex}{\normalfont\normalsize\itshape}}%
+\else % for journals
+\def\section{\@startsection{section}{1}{\z@}{3.0ex plus 1.5ex minus 1.5ex}% V1.6 3.0ex from 3.5ex
+{0.7ex plus 1ex minus 0ex}{\normalfont\normalsize\centering\scshape}}%
+\def\subsection{\@startsection{subsection}{2}{\z@}{3.5ex plus 1.5ex minus 1.5ex}%
+{0.7ex plus .5ex minus 0ex}{\normalfont\normalsize\itshape}}%
+\fi
+
+% for both journals and conferences
+% decided to put in a little rubber above the section, might help somebody
+\def\subsubsection{\@startsection{subsubsection}{3}{\parindent}{0ex plus 0.1ex minus 0.1ex}%
+{0ex}{\normalfont\normalsize\itshape}}%
+\def\paragraph{\@startsection{paragraph}{4}{2\parindent}{0ex plus 0.1ex minus 0.1ex}%
+{0ex}{\normalfont\normalsize\itshape}}%
+
+
+% compsoc
+\ifCLASSOPTIONcompsoc
+\ifCLASSOPTIONconference
+% compsoc conference
+\def\section{\@startsection{section}{1}{\z@}{1\baselineskip plus 0.25\baselineskip minus 0.25\baselineskip}%
+{1\baselineskip plus 0.25\baselineskip minus 0.25\baselineskip}{\normalfont\large\bfseries}}%
+\def\subsection{\@startsection{subsection}{2}{\z@}{1\baselineskip plus 0.25\baselineskip minus 0.25\baselineskip}%
+{1\baselineskip plus 0.25\baselineskip minus 0.25\baselineskip}{\normalfont\sublargesize\bfseries}}%
+\def\subsubsection{\@startsection{subsubsection}{3}{\z@}{1\baselineskip plus 0.25\baselineskip minus 0.25\baselineskip}%
+{0ex}{\normalfont\normalsize\bfseries}}%
+\def\paragraph{\@startsection{paragraph}{4}{2\parindent}{0ex plus 0.1ex minus 0.1ex}%
+{0ex}{\normalfont\normalsize}}%
+\else% compsoc journals
+% use negative top separation as compsoc journals do not indent paragraphs after section titles
+\def\section{\@startsection{section}{1}{\z@}{-3ex plus -2ex minus -1.5ex}%
+{0.7ex plus 1ex minus 0ex}{\normalfont\large\sffamily\bfseries\scshape}}%
+% Note that subsection and smaller may not be correct for the Computer Society,
+% I have to look up an example.
+\def\subsection{\@startsection{subsection}{2}{\z@}{-3.5ex plus -1.5ex minus -1.5ex}%
+{0.7ex plus .5ex minus 0ex}{\normalfont\normalsize\sffamily\bfseries}}%
+\def\subsubsection{\@startsection{subsubsection}{3}{\z@}{-2.5ex plus -1ex minus -1ex}%
+{0.5ex plus 0.5ex minus 0ex}{\normalfont\normalsize\sffamily\itshape}}%
+\def\paragraph{\@startsection{paragraph}{4}{2\parindent}{-0ex plus -0.1ex minus -0.1ex}%
+{0ex}{\normalfont\normalsize}}%
+\fi\fi
+
+
+
+
+%% ENVIRONMENTS
+% "box" symbols at end of proofs
+\def\IEEEQEDclosed{\mbox{\rule[0pt]{1.3ex}{1.3ex}}} % for a filled box
+% V1.6 some journals use an open box instead that will just fit around a closed one
+\def\IEEEQEDopen{{\setlength{\fboxsep}{0pt}\setlength{\fboxrule}{0.2pt}\fbox{\rule[0pt]{0pt}{1.3ex}\rule[0pt]{1.3ex}{0pt}}}}
+\ifCLASSOPTIONcompsoc
+\def\IEEEQED{\IEEEQEDopen} % default to open for compsoc
+\else
+\def\IEEEQED{\IEEEQEDclosed} % otherwise default to closed
+\fi
+
+% v1.7 name change to avoid namespace collision with amsthm. Also add support
+% for an optional argument.
+\def\IEEEproof{\@ifnextchar[{\@IEEEproof}{\@IEEEproof[\IEEEproofname]}}
+\def\@IEEEproof[#1]{\par\noindent\hspace{2em}{\itshape #1: }}
+\def\endIEEEproof{\hspace*{\fill}~\IEEEQED\par}
+
+
+%\itemindent is set to \z@ by list, so define new temporary variable
+\newdimen\@IEEEtmpitemindent
+\def\@begintheorem#1#2{\@IEEEtmpitemindent\itemindent\topsep 0pt\rmfamily\trivlist%
+ \item[\hskip \labelsep{\indent\itshape #1\ #2:}]\itemindent\@IEEEtmpitemindent}
+\def\@opargbegintheorem#1#2#3{\@IEEEtmpitemindent\itemindent\topsep 0pt\rmfamily \trivlist%
+% V1.6 IEEE is back to using () around theorem names which are also in italics
+% Thanks to Christian Peel for reporting this.
+ \item[\hskip\labelsep{\indent\itshape #1\ #2\ (#3):}]\itemindent\@IEEEtmpitemindent}
+% V1.7 remove bogus \unskip that caused equations in theorems to collide with
+% lines below.
+\def\@endtheorem{\endtrivlist}
+
+% V1.6
+% display command for the section the theorem is in - so that \thesection
+% is not used as this will be in Roman numerals when we want arabic.
+% LaTeX2e uses \def\@thmcounter#1{\noexpand\arabic{#1}} for the theorem number
+% (second part) display and \def\@thmcountersep{.} as a separator.
+% V1.7 intercept calls to the section counter and reroute to \@IEEEthmcounterinsection
+% to allow \appendix(ices} to override as needed.
+%
+% special handler for sections, allows appendix(ices) to override
+\gdef\@IEEEthmcounterinsection#1{\arabic{#1}}
+% string macro
+\edef\@IEEEstringsection{section}
+
+% redefine the #1#2[#3] form of newtheorem to use a hook to \@IEEEthmcounterinsection
+% if section in_counter is used
+\def\@xnthm#1#2[#3]{%
+ \expandafter\@ifdefinable\csname #1\endcsname
+ {\@definecounter{#1}\@newctr{#1}[#3]%
+ \edef\@IEEEstringtmp{#3}
+ \ifx\@IEEEstringtmp\@IEEEstringsection
+ \expandafter\xdef\csname the#1\endcsname{%
+ \noexpand\@IEEEthmcounterinsection{#3}\@thmcountersep
+ \@thmcounter{#1}}%
+ \else
+ \expandafter\xdef\csname the#1\endcsname{%
+ \expandafter\noexpand\csname the#3\endcsname \@thmcountersep
+ \@thmcounter{#1}}%
+ \fi
+ \global\@namedef{#1}{\@thm{#1}{#2}}%
+ \global\@namedef{end#1}{\@endtheorem}}}
+
+
+
+%% SET UP THE DEFAULT PAGESTYLE
+\ps@headings
+\pagenumbering{arabic}
+
+% normally the page counter starts at 1
+\setcounter{page}{1}
+% however, for peerreview the cover sheet is page 0 or page -1
+% (for duplex printing)
+\ifCLASSOPTIONpeerreview
+ \if@twoside
+ \setcounter{page}{-1}
+ \else
+ \setcounter{page}{0}
+ \fi
+\fi
+
+% standard book class behavior - let bottom line float up and down as
+% needed when single sided
+\ifCLASSOPTIONtwoside\else\raggedbottom\fi
+% if two column - turn on twocolumn, allow word spacings to stretch more and
+% enforce a rigid position for the last lines
+\ifCLASSOPTIONtwocolumn
+% the peer review option delays invoking twocolumn
+ \ifCLASSOPTIONpeerreview\else
+ \twocolumn
+ \fi
+\sloppy
+\flushbottom
+\fi
+
+
+
+
+% \APPENDIX and \APPENDICES definitions
+
+% This is the \@ifmtarg command from the LaTeX ifmtarg package
+% by Peter Wilson (CUA) and Donald Arseneau
+% \@ifmtarg is used to determine if an argument to a command
+% is present or not.
+% For instance:
+% \@ifmtarg{#1}{\typeout{empty}}{\typeout{has something}}
+% \@ifmtarg is used with our redefined \section command if
+% \appendices is invoked.
+% The command \section will behave slightly differently depending
+% on whether the user specifies a title:
+% \section{My appendix title}
+% or not:
+% \section{}
+% This way, we can eliminate the blank lines where the title
+% would be, and the unneeded : after Appendix in the table of
+% contents
+\begingroup
+\catcode`\Q=3
+\long\gdef\@ifmtarg#1{\@xifmtarg#1QQ\@secondoftwo\@firstoftwo\@nil}
+\long\gdef\@xifmtarg#1#2Q#3#4#5\@nil{#4}
+\endgroup
+% end of \@ifmtarg defs
+
+
+% V1.7
+% command that allows the one time saving of the original definition
+% of section to \@IEEEappendixsavesection for \appendix or \appendices
+% we don't save \section here as it may be redefined later by other
+% packages (hyperref.sty, etc.)
+\def\@IEEEsaveoriginalsectiononce{\let\@IEEEappendixsavesection\section
+\let\@IEEEsaveoriginalsectiononce\relax}
+
+% neat trick to grab and process the argument from \section{argument}
+% we process differently if the user invoked \section{} with no
+% argument (title)
+% note we reroute the call to the old \section*
+\def\@IEEEprocessthesectionargument#1{%
+\@ifmtarg{#1}{%
+\@IEEEappendixsavesection*{\appendixname~\thesectiondis}%
+\addcontentsline{toc}{section}{\appendixname~\thesection}}{%
+\@IEEEappendixsavesection*{\appendixname~\thesectiondis \\* #1}%
+\addcontentsline{toc}{section}{\appendixname~\thesection: #1}}}
+
+% we use this if the user calls \section{} after
+% \appendix-- which has no meaning. So, we ignore the
+% command and its argument. Then, warn the user.
+\def\@IEEEdestroythesectionargument#1{\typeout{** WARNING: Ignoring useless
+\protect\section\space in Appendix (line \the\inputlineno).}}
+
+
+% remember \thesection forms will be displayed in \ref calls
+% and in the Table of Contents.
+% The \sectiondis form is used in the actual heading itself
+
+% appendix command for one single appendix
+% normally has no heading. However, if you want a
+% heading, you can do so via the optional argument:
+% \appendix[Optional Heading]
+\def\appendix{\relax}
+\renewcommand{\appendix}[1][]{\@IEEEsaveoriginalsectiononce\par
+ % v1.6 keep hyperref's identifiers unique
+ \gdef\theHsection{Appendix.A}%
+ % v1.6 adjust hyperref's string name for the section
+ \xdef\Hy@chapapp{appendix}%
+ \setcounter{section}{0}%
+ \setcounter{subsection}{0}%
+ \setcounter{subsubsection}{0}%
+ \setcounter{paragraph}{0}%
+ \gdef\thesection{A}%
+ \gdef\thesectiondis{}%
+ \gdef\thesubsection{\Alph{subsection}}%
+ \gdef\@IEEEthmcounterinsection##1{A}
+ \refstepcounter{section}% update the \ref counter
+ \@ifmtarg{#1}{\@IEEEappendixsavesection*{\appendixname}%
+ \addcontentsline{toc}{section}{\appendixname}}{%
+ \@IEEEappendixsavesection*{\appendixname~\\* #1}%
+ \addcontentsline{toc}{section}{\appendixname: #1}}%
+ % redefine \section command for appendix
+ % leave \section* as is
+ \def\section{\@ifstar{\@IEEEappendixsavesection*}{%
+ \@IEEEdestroythesectionargument}}% throw out the argument
+ % of the normal form
+}
+
+
+
+% appendices command for multiple appendices
+% user then calls \section with an argument (possibly empty) to
+% declare the individual appendices
+\def\appendices{\@IEEEsaveoriginalsectiononce\par
+ % v1.6 keep hyperref's identifiers unique
+ \gdef\theHsection{Appendix.\Alph{section}}%
+ % v1.6 adjust hyperref's string name for the section
+ \xdef\Hy@chapapp{appendix}%
+ \setcounter{section}{-1}% we want \refstepcounter to use section 0
+ \setcounter{subsection}{0}%
+ \setcounter{subsubsection}{0}%
+ \setcounter{paragraph}{0}%
+ \ifCLASSOPTIONromanappendices%
+ \gdef\thesection{\Roman{section}}%
+ \gdef\thesectiondis{\Roman{section}}%
+ \@IEEEcompsocconfonly{\gdef\thesectiondis{\Roman{section}.}}%
+ \gdef\@IEEEthmcounterinsection##1{A\arabic{##1}}
+ \else%
+ \gdef\thesection{\Alph{section}}%
+ \gdef\thesectiondis{\Alph{section}}%
+ \@IEEEcompsocconfonly{\gdef\thesectiondis{\Alph{section}.}}%
+ \gdef\@IEEEthmcounterinsection##1{\Alph{##1}}
+ \fi%
+ \refstepcounter{section}% update the \ref counter
+ \setcounter{section}{0}% NEXT \section will be the FIRST appendix
+ % redefine \section command for appendices
+ % leave \section* as is
+ \def\section{\@ifstar{\@IEEEappendixsavesection*}{% process the *-form
+ \refstepcounter{section}% or is a new section so,
+ \@IEEEprocessthesectionargument}}% process the argument
+ % of the normal form
+}
+
+
+
+% \IEEEPARstart
+% Definition for the big two line drop cap letter at the beginning of the
+% first paragraph of journal papers. The first argument is the first letter
+% of the first word, the second argument is the remaining letters of the
+% first word which will be rendered in upper case.
+% In V1.6 this has been completely rewritten to:
+%
+% 1. no longer have problems when the user begins an environment
+% within the paragraph that uses \IEEEPARstart.
+% 2. auto-detect and use the current font family
+% 3. revise handling of the space at the end of the first word so that
+% interword glue will now work as normal.
+% 4. produce correctly aligned edges for the (two) indented lines.
+%
+% We generalize things via control macros - playing with these is fun too.
+%
+% V1.7 added more control macros to make it easy for IEEEtrantools.sty users
+% to change the font style.
+%
+% the number of lines that are indented to clear it
+% may need to increase if using decenders
+\def\@IEEEPARstartDROPLINES{2}
+% minimum number of lines left on a page to allow a \@IEEEPARstart
+% Does not take into consideration rubber shrink, so it tends to
+% be overly cautious
+\def\@IEEEPARstartMINPAGELINES{2}
+% V1.7 the height of the drop cap is adjusted to match the height of this text
+% in the current font (when \IEEEPARstart is called).
+\def\@IEEEPARstartHEIGHTTEXT{T}
+% the depth the letter is lowered below the baseline
+% the height (and size) of the letter is determined by the sum
+% of this value and the height of the \@IEEEPARstartHEIGHTTEXT in the current
+% font. It is a good idea to set this value in terms of the baselineskip
+% so that it can respond to changes therein.
+\def\@IEEEPARstartDROPDEPTH{1.1\baselineskip}
+% V1.7 the font the drop cap will be rendered in,
+% can take zero or one argument.
+\def\@IEEEPARstartFONTSTYLE{\bfseries}
+% V1.7 any additional, non-font related commands needed to modify
+% the drop cap letter, can take zero or one argument.
+\def\@IEEEPARstartCAPSTYLE{\MakeUppercase}
+% V1.7 the font that will be used to render the rest of the word,
+% can take zero or one argument.
+\def\@IEEEPARstartWORDFONTSTYLE{\relax}
+% V1.7 any additional, non-font related commands needed to modify
+% the rest of the word, can take zero or one argument.
+\def\@IEEEPARstartWORDCAPSTYLE{\MakeUppercase}
+% This is the horizontal separation distance from the drop letter to the main text.
+% Lengths that depend on the font (e.g., ex, em, etc.) will be referenced
+% to the font that is active when \IEEEPARstart is called.
+\def\@IEEEPARstartSEP{0.15em}
+% V1.7 horizontal offset applied to the left of the drop cap.
+\def\@IEEEPARstartHOFFSET{0em}
+% V1.7 Italic correction command applied at the end of the drop cap.
+\def\@IEEEPARstartITLCORRECT{\/}
+
+% V1.7 compoc uses nonbold drop cap and small caps word style
+\ifCLASSOPTIONcompsoc
+\def\@IEEEPARstartFONTSTYLE{\mdseries}
+\def\@IEEEPARstartWORDFONTSTYLE{\scshape}
+\def\@IEEEPARstartWORDCAPSTYLE{\relax}
+\fi
+
+% definition of \IEEEPARstart
+% THIS IS A CONTROLLED SPACING AREA, DO NOT ALLOW SPACES WITHIN THESE LINES
+%
+% The token \@IEEEPARstartfont will be globally defined after the first use
+% of \IEEEPARstart and will be a font command which creates the big letter
+% The first argument is the first letter of the first word and the second
+% argument is the rest of the first word(s).
+\def\IEEEPARstart#1#2{\par{%
+% if this page does not have enough space, break it and lets start
+% on a new one
+\@IEEEtranneedspace{\@IEEEPARstartMINPAGELINES\baselineskip}{\relax}%
+% V1.7 move this up here in case user uses \textbf for \@IEEEPARstartFONTSTYLE
+% which uses command \leavevmode which causes an unwanted \indent to be issued
+\noindent
+% calculate the desired height of the big letter
+% it extends from the top of \@IEEEPARstartHEIGHTTEXT in the current font
+% down to \@IEEEPARstartDROPDEPTH below the current baseline
+\settoheight{\@IEEEtrantmpdimenA}{\@IEEEPARstartHEIGHTTEXT}%
+\addtolength{\@IEEEtrantmpdimenA}{\@IEEEPARstartDROPDEPTH}%
+% extract the name of the current font in bold
+% and place it in \@IEEEPARstartFONTNAME
+\def\@IEEEPARstartGETFIRSTWORD##1 ##2\relax{##1}%
+{\@IEEEPARstartFONTSTYLE{\selectfont\edef\@IEEEPARstartFONTNAMESPACE{\fontname\font\space}%
+\xdef\@IEEEPARstartFONTNAME{\expandafter\@IEEEPARstartGETFIRSTWORD\@IEEEPARstartFONTNAMESPACE\relax}}}%
+% define a font based on this name with a point size equal to the desired
+% height of the drop letter
+\font\@IEEEPARstartsubfont\@IEEEPARstartFONTNAME\space at \@IEEEtrantmpdimenA\relax%
+% save this value as a counter (integer) value (sp points)
+\@IEEEtrantmpcountA=\@IEEEtrantmpdimenA%
+% now get the height of the actual letter produced by this font size
+\settoheight{\@IEEEtrantmpdimenB}{\@IEEEPARstartsubfont\@IEEEPARstartCAPSTYLE{#1}}%
+% If something bogus happens like the first argument is empty or the
+% current font is strange, do not allow a zero height.
+\ifdim\@IEEEtrantmpdimenB=0pt\relax%
+\typeout{** WARNING: IEEEPARstart drop letter has zero height! (line \the\inputlineno)}%
+\typeout{ Forcing the drop letter font size to 10pt.}%
+\@IEEEtrantmpdimenB=10pt%
+\fi%
+% and store it as a counter
+\@IEEEtrantmpcountB=\@IEEEtrantmpdimenB%
+% Since a font size doesn't exactly correspond to the height of the capital
+% letters in that font, the actual height of the letter, \@IEEEtrantmpcountB,
+% will be less than that desired, \@IEEEtrantmpcountA
+% we need to raise the font size, \@IEEEtrantmpdimenA
+% by \@IEEEtrantmpcountA / \@IEEEtrantmpcountB
+% But, TeX doesn't have floating point division, so we have to use integer
+% division. Hence the use of the counters.
+% We need to reduce the denominator so that the loss of the remainder will
+% have minimal affect on the accuracy of the result
+\divide\@IEEEtrantmpcountB by 200%
+\divide\@IEEEtrantmpcountA by \@IEEEtrantmpcountB%
+% Then reequalize things when we use TeX's ability to multiply by
+% floating point values
+\@IEEEtrantmpdimenB=0.005\@IEEEtrantmpdimenA%
+\multiply\@IEEEtrantmpdimenB by \@IEEEtrantmpcountA%
+% \@IEEEPARstartfont is globaly set to the calculated font of the big letter
+% We need to carry this out of the local calculation area to to create the
+% big letter.
+\global\font\@IEEEPARstartfont\@IEEEPARstartFONTNAME\space at \@IEEEtrantmpdimenB%
+% Now set \@IEEEtrantmpdimenA to the width of the big letter
+% We need to carry this out of the local calculation area to set the
+% hanging indent
+\settowidth{\global\@IEEEtrantmpdimenA}{\@IEEEPARstartfont
+\@IEEEPARstartCAPSTYLE{#1\@IEEEPARstartITLCORRECT}}}%
+% end of the isolated calculation environment
+% add in the extra clearance we want
+\advance\@IEEEtrantmpdimenA by \@IEEEPARstartSEP\relax%
+% add in the optional offset
+\advance\@IEEEtrantmpdimenA by \@IEEEPARstartHOFFSET\relax%
+% V1.7 don't allow negative offsets to produce negative hanging indents
+\@IEEEtrantmpdimenB\@IEEEtrantmpdimenA
+\ifnum\@IEEEtrantmpdimenB < 0 \@IEEEtrantmpdimenB 0pt\fi
+% \@IEEEtrantmpdimenA has the width of the big letter plus the
+% separation space and \@IEEEPARstartfont is the font we need to use
+% Now, we make the letter and issue the hanging indent command
+% The letter is placed in a box of zero width and height so that other
+% text won't be displaced by it.
+\hangindent\@IEEEtrantmpdimenB\hangafter=-\@IEEEPARstartDROPLINES%
+\makebox[0pt][l]{\hspace{-\@IEEEtrantmpdimenA}%
+\raisebox{-\@IEEEPARstartDROPDEPTH}[0pt][0pt]{\hspace{\@IEEEPARstartHOFFSET}%
+\@IEEEPARstartfont\@IEEEPARstartCAPSTYLE{#1\@IEEEPARstartITLCORRECT}%
+\hspace{\@IEEEPARstartSEP}}}%
+{\@IEEEPARstartWORDFONTSTYLE{\@IEEEPARstartWORDCAPSTYLE{\selectfont#2}}}}
+
+
+
+
+
+
+% determines if the space remaining on a given page is equal to or greater
+% than the specified space of argument one
+% if not, execute argument two (only if the remaining space is greater than zero)
+% and issue a \newpage
+%
+% example: \@IEEEtranneedspace{2in}{\vfill}
+%
+% Does not take into consideration rubber shrinkage, so it tends to
+% be overly cautious
+% Based on an example posted by Donald Arseneau
+% Note this macro uses \@IEEEtrantmpdimenB internally for calculations,
+% so DO NOT PASS \@IEEEtrantmpdimenB to this routine
+% if you need a dimen register, import with \@IEEEtrantmpdimenA instead
+\def\@IEEEtranneedspace#1#2{\penalty-100\begingroup%shield temp variable
+\@IEEEtrantmpdimenB\pagegoal\advance\@IEEEtrantmpdimenB-\pagetotal% space left
+\ifdim #1>\@IEEEtrantmpdimenB\relax% not enough space left
+\ifdim\@IEEEtrantmpdimenB>\z@\relax #2\fi%
+\newpage%
+\fi\endgroup}
+
+
+
+% IEEEbiography ENVIRONMENT
+% Allows user to enter biography leaving place for picture (adapts to font size)
+% As of V1.5, a new optional argument allows you to have a real graphic!
+% V1.5 and later also fixes the "colliding biographies" which could happen when a
+% biography's text was shorter than the space for the photo.
+% MDS 7/2001
+% V1.6 prevent multiple biographies from making multiple TOC entries
+\newif\if@IEEEbiographyTOCentrynotmade
+\global\@IEEEbiographyTOCentrynotmadetrue
+
+% biography counter so hyperref can jump directly to the biographies
+% and not just the previous section
+\newcounter{IEEEbiography}
+\setcounter{IEEEbiography}{0}
+
+% photo area size
+\def\@IEEEBIOphotowidth{1.0in} % width of the biography photo area
+\def\@IEEEBIOphotodepth{1.25in} % depth (height) of the biography photo area
+% area cleared for photo
+\def\@IEEEBIOhangwidth{1.14in} % width cleared for the biography photo area
+\def\@IEEEBIOhangdepth{1.25in} % depth cleared for the biography photo area
+ % actual depth will be a multiple of
+ % \baselineskip, rounded up
+\def\@IEEEBIOskipN{4\baselineskip}% nominal value of the vskip above the biography
+
+\newenvironment{IEEEbiography}[2][]{\normalfont\@IEEEcompsoconly{\sffamily}\footnotesize%
+\unitlength 1in\parskip=0pt\par\parindent 1em\interlinepenalty500%
+% we need enough space to support the hanging indent
+% the nominal value of the spacer
+% and one extra line for good measure
+\@IEEEtrantmpdimenA=\@IEEEBIOhangdepth%
+\advance\@IEEEtrantmpdimenA by \@IEEEBIOskipN%
+\advance\@IEEEtrantmpdimenA by 1\baselineskip%
+% if this page does not have enough space, break it and lets start
+% with a new one
+\@IEEEtranneedspace{\@IEEEtrantmpdimenA}{\relax}%
+% nominal spacer can strech, not shrink use 1fil so user can out stretch with \vfill
+\vskip \@IEEEBIOskipN plus 1fil minus 0\baselineskip%
+% the default box for where the photo goes
+\def\@IEEEtempbiographybox{{\setlength{\fboxsep}{0pt}\framebox{%
+\begin{minipage}[b][\@IEEEBIOphotodepth][c]{\@IEEEBIOphotowidth}\centering PLACE\\ PHOTO\\ HERE \end{minipage}}}}%
+%
+% detect if the optional argument was supplied, this requires the
+% \@ifmtarg command as defined in the appendix section above
+% and if so, override the default box with what they want
+\@ifmtarg{#1}{\relax}{\def\@IEEEtempbiographybox{\mbox{\begin{minipage}[b][\@IEEEBIOphotodepth][c]{\@IEEEBIOphotowidth}%
+\centering%
+#1%
+\end{minipage}}}}% end if optional argument supplied
+% Make an entry into the table of contents only if we have not done so before
+\if@IEEEbiographyTOCentrynotmade%
+% link labels to the biography counter so hyperref will jump
+% to the biography, not the previous section
+\setcounter{IEEEbiography}{-1}%
+\refstepcounter{IEEEbiography}%
+\addcontentsline{toc}{section}{Biographies}%
+\global\@IEEEbiographyTOCentrynotmadefalse%
+\fi%
+% one more biography
+\refstepcounter{IEEEbiography}%
+% Make an entry for this name into the table of contents
+\addcontentsline{toc}{subsection}{#2}%
+% V1.6 properly handle if a new paragraph should occur while the
+% hanging indent is still active. Do this by redefining \par so
+% that it will not start a new paragraph. (But it will appear to the
+% user as if it did.) Also, strip any leading pars, newlines, or spaces.
+\let\@IEEEBIOORGparCMD=\par% save the original \par command
+\edef\par{\hfil\break\indent}% the new \par will not be a "real" \par
+\settoheight{\@IEEEtrantmpdimenA}{\@IEEEtempbiographybox}% get height of biography box
+\@IEEEtrantmpdimenB=\@IEEEBIOhangdepth%
+\@IEEEtrantmpcountA=\@IEEEtrantmpdimenB% countA has the hang depth
+\divide\@IEEEtrantmpcountA by \baselineskip% calculates lines needed to produce the hang depth
+\advance\@IEEEtrantmpcountA by 1% ensure we overestimate
+% set the hanging indent
+\hangindent\@IEEEBIOhangwidth%
+\hangafter-\@IEEEtrantmpcountA%
+% reference the top of the photo area to the top of a capital T
+\settoheight{\@IEEEtrantmpdimenB}{\mbox{T}}%
+% set the photo box, give it zero width and height so as not to disturb anything
+\noindent\makebox[0pt][l]{\hspace{-\@IEEEBIOhangwidth}\raisebox{\@IEEEtrantmpdimenB}[0pt][0pt]{%
+\raisebox{-\@IEEEBIOphotodepth}[0pt][0pt]{\@IEEEtempbiographybox}}}%
+% now place the author name and begin the bio text
+\noindent\textbf{#2\ }\@IEEEgobbleleadPARNLSP}{\relax\let\par=\@IEEEBIOORGparCMD\par%
+% 7/2001 V1.5 detect when the biography text is shorter than the photo area
+% and pad the unused area - preventing a collision from the next biography entry
+% MDS
+\ifnum \prevgraf <\@IEEEtrantmpcountA\relax% detect when the biography text is shorter than the photo
+ \advance\@IEEEtrantmpcountA by -\prevgraf% calculate how many lines we need to pad
+ \advance\@IEEEtrantmpcountA by -1\relax% we compensate for the fact that we indented an extra line
+ \@IEEEtrantmpdimenA=\baselineskip% calculate the length of the padding
+ \multiply\@IEEEtrantmpdimenA by \@IEEEtrantmpcountA%
+ \noindent\rule{0pt}{\@IEEEtrantmpdimenA}% insert an invisible support strut
+\fi%
+\par\normalfont}
+
+
+
+% V1.6
+% added biography without a photo environment
+\newenvironment{IEEEbiographynophoto}[1]{%
+% Make an entry into the table of contents only if we have not done so before
+\if@IEEEbiographyTOCentrynotmade%
+% link labels to the biography counter so hyperref will jump
+% to the biography, not the previous section
+\setcounter{IEEEbiography}{-1}%
+\refstepcounter{IEEEbiography}%
+\addcontentsline{toc}{section}{Biographies}%
+\global\@IEEEbiographyTOCentrynotmadefalse%
+\fi%
+% one more biography
+\refstepcounter{IEEEbiography}%
+% Make an entry for this name into the table of contents
+\addcontentsline{toc}{subsection}{#1}%
+\normalfont\@IEEEcompsoconly{\sffamily}\footnotesize\interlinepenalty500%
+\vskip 4\baselineskip plus 1fil minus 0\baselineskip%
+\parskip=0pt\par%
+\noindent\textbf{#1\ }\@IEEEgobbleleadPARNLSP}{\relax\par\normalfont}
+
+
+% provide the user with some old font commands
+% got this from article.cls
+\DeclareOldFontCommand{\rm}{\normalfont\rmfamily}{\mathrm}
+\DeclareOldFontCommand{\sf}{\normalfont\sffamily}{\mathsf}
+\DeclareOldFontCommand{\tt}{\normalfont\ttfamily}{\mathtt}
+\DeclareOldFontCommand{\bf}{\normalfont\bfseries}{\mathbf}
+\DeclareOldFontCommand{\it}{\normalfont\itshape}{\mathit}
+\DeclareOldFontCommand{\sl}{\normalfont\slshape}{\@nomath\sl}
+\DeclareOldFontCommand{\sc}{\normalfont\scshape}{\@nomath\sc}
+\DeclareRobustCommand*\cal{\@fontswitch\relax\mathcal}
+\DeclareRobustCommand*\mit{\@fontswitch\relax\mathnormal}
+
+
+% SPECIAL PAPER NOTICE COMMANDS
+%
+% holds the special notice text
+\def\@IEEEspecialpapernotice{\relax}
+
+% for special papers, like invited papers, the user can do:
+% \IEEEspecialpapernotice{(Invited Paper)} before \maketitle
+\def\IEEEspecialpapernotice#1{\ifCLASSOPTIONconference%
+\def\@IEEEspecialpapernotice{{\sublargesize\textit{#1}\vspace*{1em}}}%
+\else%
+\def\@IEEEspecialpapernotice{{\\*[1.5ex]\sublargesize\textit{#1}}\vspace*{-2ex}}%
+\fi}
+
+
+
+
+% PUBLISHER ID COMMANDS
+% to insert a publisher's ID footer
+% V1.6 \IEEEpubid has been changed so that the change in page size and style
+% occurs in \maketitle. \IEEEpubid must now be issued prior to \maketitle
+% use \IEEEpubidadjcol as before - in the second column of the title page
+% These changes allow \maketitle to take the reduced page height into
+% consideration when dynamically setting the space between the author
+% names and the maintext.
+%
+% the amount the main text is pulled up to make room for the
+% publisher's ID footer
+% IEEE uses about 1.3\baselineskip for journals,
+% dynamic title spacing will clean up the fraction
+\def\@IEEEpubidpullup{1.3\baselineskip}
+\ifCLASSOPTIONtechnote
+% for technotes it must be an integer of baselineskip as there can be no
+% dynamic title spacing for two column mode technotes (the title is in the
+% in first column) and we should maintain an integer number of lines in the
+% second column
+% There are some examples (such as older issues of "Transactions on
+% Information Theory") in which IEEE really pulls the text off the ID for
+% technotes - about 0.55in (or 4\baselineskip). We'll use 2\baselineskip
+% and call it even.
+\def\@IEEEpubidpullup{2\baselineskip}
+\fi
+
+% V1.7 compsoc does not use a pullup
+\ifCLASSOPTIONcompsoc
+\def\@IEEEpubidpullup{0pt}
+\fi
+
+% holds the ID text
+\def\@IEEEpubid{\relax}
+
+% flag so \maketitle can tell if \IEEEpubid was called
+\newif\if@IEEEusingpubid
+\global\@IEEEusingpubidfalse
+% issue this command in the page to have the ID at the bottom
+% V1.6 use before \maketitle
+\def\IEEEpubid#1{\def\@IEEEpubid{#1}\global\@IEEEusingpubidtrue}
+
+
+% command which will pull up (shorten) the column it is executed in
+% to make room for the publisher ID. Place in the second column of
+% the title page when using \IEEEpubid
+% Is smart enough not to do anything when in single column text or
+% if the user hasn't called \IEEEpubid
+% currently needed in for the second column of a page with the
+% publisher ID. If not needed in future releases, please provide this
+% command and define it as \relax for backward compatibility
+% v1.6b do not allow command to operate if the peer review option has been
+% selected because \IEEEpubidadjcol will not be on the cover page.
+% V1.7 do nothing if compsoc
+\def\IEEEpubidadjcol{\ifCLASSOPTIONcompsoc\else\ifCLASSOPTIONpeerreview\else
+\if@twocolumn\if@IEEEusingpubid\enlargethispage{-\@IEEEpubidpullup}\fi\fi\fi\fi}
+
+% Special thanks to Peter Wilson, Daniel Luecking, and the other
+% gurus at comp.text.tex, for helping me to understand how best to
+% implement the IEEEpubid command in LaTeX.
+
+
+
+%% Lockout some commands under various conditions
+
+% general purpose bit bucket
+\newsavebox{\@IEEEtranrubishbin}
+
+% flags to prevent multiple warning messages
+\newif\if@IEEEWARNthanks
+\newif\if@IEEEWARNIEEEPARstart
+\newif\if@IEEEWARNIEEEbiography
+\newif\if@IEEEWARNIEEEbiographynophoto
+\newif\if@IEEEWARNIEEEpubid
+\newif\if@IEEEWARNIEEEpubidadjcol
+\newif\if@IEEEWARNIEEEmembership
+\newif\if@IEEEWARNIEEEaftertitletext
+\@IEEEWARNthankstrue
+\@IEEEWARNIEEEPARstarttrue
+\@IEEEWARNIEEEbiographytrue
+\@IEEEWARNIEEEbiographynophototrue
+\@IEEEWARNIEEEpubidtrue
+\@IEEEWARNIEEEpubidadjcoltrue
+\@IEEEWARNIEEEmembershiptrue
+\@IEEEWARNIEEEaftertitletexttrue
+
+
+%% Lockout some commands when in various modes, but allow them to be restored if needed
+%%
+% save commands which might be locked out
+% so that the user can later restore them if needed
+\let\@IEEESAVECMDthanks\thanks
+\let\@IEEESAVECMDIEEEPARstart\IEEEPARstart
+\let\@IEEESAVECMDIEEEbiography\IEEEbiography
+\let\@IEEESAVECMDendIEEEbiography\endIEEEbiography
+\let\@IEEESAVECMDIEEEbiographynophoto\IEEEbiographynophoto
+\let\@IEEESAVECMDendIEEEbiographynophoto\endIEEEbiographynophoto
+\let\@IEEESAVECMDIEEEpubid\IEEEpubid
+\let\@IEEESAVECMDIEEEpubidadjcol\IEEEpubidadjcol
+\let\@IEEESAVECMDIEEEmembership\IEEEmembership
+\let\@IEEESAVECMDIEEEaftertitletext\IEEEaftertitletext
+
+
+% disable \IEEEPARstart when in draft mode
+% This may have originally been done because the pre-V1.6 drop letter
+% algorithm had problems with a non-unity baselinestretch
+% At any rate, it seems too formal to have a drop letter in a draft
+% paper.
+\ifCLASSOPTIONdraftcls
+\def\IEEEPARstart#1#2{#1#2\if@IEEEWARNIEEEPARstart\typeout{** ATTENTION: \noexpand\IEEEPARstart
+ is disabled in draft mode (line \the\inputlineno).}\fi\global\@IEEEWARNIEEEPARstartfalse}
+\fi
+% and for technotes
+\ifCLASSOPTIONtechnote
+\def\IEEEPARstart#1#2{#1#2\if@IEEEWARNIEEEPARstart\typeout{** WARNING: \noexpand\IEEEPARstart
+ is locked out for technotes (line \the\inputlineno).}\fi\global\@IEEEWARNIEEEPARstartfalse}
+\fi
+
+
+% lockout unneeded commands when in conference mode
+\ifCLASSOPTIONconference
+% when locked out, \thanks, \IEEEbiography, \IEEEbiographynophoto, \IEEEpubid,
+% \IEEEmembership and \IEEEaftertitletext will all swallow their given text.
+% \IEEEPARstart will output a normal character instead
+% warn the user about these commands only once to prevent the console screen
+% from filling up with redundant messages
+\def\thanks#1{\if@IEEEWARNthanks\typeout{** WARNING: \noexpand\thanks
+ is locked out when in conference mode (line \the\inputlineno).}\fi\global\@IEEEWARNthanksfalse}
+\def\IEEEPARstart#1#2{#1#2\if@IEEEWARNIEEEPARstart\typeout{** WARNING: \noexpand\IEEEPARstart
+ is locked out when in conference mode (line \the\inputlineno).}\fi\global\@IEEEWARNIEEEPARstartfalse}
+
+
+% LaTeX treats environments and commands with optional arguments differently.
+% the actual ("internal") command is stored as \\commandname
+% (accessed via \csname\string\commandname\endcsname )
+% the "external" command \commandname is a macro with code to determine
+% whether or not the optional argument is presented and to provide the
+% default if it is absent. So, in order to save and restore such a command
+% we would have to save and restore \\commandname as well. But, if LaTeX
+% ever changes the way it names the internal names, the trick would break.
+% Instead let us just define a new environment so that the internal
+% name can be left undisturbed.
+\newenvironment{@IEEEbogusbiography}[2][]{\if@IEEEWARNIEEEbiography\typeout{** WARNING: \noexpand\IEEEbiography
+ is locked out when in conference mode (line \the\inputlineno).}\fi\global\@IEEEWARNIEEEbiographyfalse%
+\setbox\@IEEEtranrubishbin\vbox\bgroup}{\egroup\relax}
+% and make biography point to our bogus biography
+\let\IEEEbiography=\@IEEEbogusbiography
+\let\endIEEEbiography=\end@IEEEbogusbiography
+
+\renewenvironment{IEEEbiographynophoto}[1]{\if@IEEEWARNIEEEbiographynophoto\typeout{** WARNING: \noexpand\IEEEbiographynophoto
+ is locked out when in conference mode (line \the\inputlineno).}\fi\global\@IEEEWARNIEEEbiographynophotofalse%
+\setbox\@IEEEtranrubishbin\vbox\bgroup}{\egroup\relax}
+
+\def\IEEEpubid#1{\if@IEEEWARNIEEEpubid\typeout{** WARNING: \noexpand\IEEEpubid
+ is locked out when in conference mode (line \the\inputlineno).}\fi\global\@IEEEWARNIEEEpubidfalse}
+\def\IEEEpubidadjcol{\if@IEEEWARNIEEEpubidadjcol\typeout{** WARNING: \noexpand\IEEEpubidadjcol
+ is locked out when in conference mode (line \the\inputlineno).}\fi\global\@IEEEWARNIEEEpubidadjcolfalse}
+\def\IEEEmembership#1{\if@IEEEWARNIEEEmembership\typeout{** WARNING: \noexpand\IEEEmembership
+ is locked out when in conference mode (line \the\inputlineno).}\fi\global\@IEEEWARNIEEEmembershipfalse}
+\def\IEEEaftertitletext#1{\if@IEEEWARNIEEEaftertitletext\typeout{** WARNING: \noexpand\IEEEaftertitletext
+ is locked out when in conference mode (line \the\inputlineno).}\fi\global\@IEEEWARNIEEEaftertitletextfalse}
+\fi
+
+
+% provide a way to restore the commands that are locked out
+\def\IEEEoverridecommandlockouts{%
+\typeout{** ATTENTION: Overriding command lockouts (line \the\inputlineno).}%
+\let\thanks\@IEEESAVECMDthanks%
+\let\IEEEPARstart\@IEEESAVECMDIEEEPARstart%
+\let\IEEEbiography\@IEEESAVECMDIEEEbiography%
+\let\endIEEEbiography\@IEEESAVECMDendIEEEbiography%
+\let\IEEEbiographynophoto\@IEEESAVECMDIEEEbiographynophoto%
+\let\endIEEEbiographynophoto\@IEEESAVECMDendIEEEbiographynophoto%
+\let\IEEEpubid\@IEEESAVECMDIEEEpubid%
+\let\IEEEpubidadjcol\@IEEESAVECMDIEEEpubidadjcol%
+\let\IEEEmembership\@IEEESAVECMDIEEEmembership%
+\let\IEEEaftertitletext\@IEEESAVECMDIEEEaftertitletext}
+
+
+
+% need a backslash character for typeout output
+{\catcode`\|=0 \catcode`\\=12
+|xdef|@IEEEbackslash{\}}
+
+
+% hook to allow easy disabling of all legacy warnings
+\def\@IEEElegacywarn#1#2{\typeout{** ATTENTION: \@IEEEbackslash #1 is deprecated (line \the\inputlineno).
+Use \@IEEEbackslash #2 instead.}}
+
+
+% provide for legacy commands
+\def\authorblockA{\@IEEElegacywarn{authorblockA}{IEEEauthorblockA}\IEEEauthorblockA}
+\def\authorblockN{\@IEEElegacywarn{authorblockN}{IEEEauthorblockN}\IEEEauthorblockN}
+\def\authorrefmark{\@IEEElegacywarn{authorrefmark}{IEEEauthorrefmark}\IEEEauthorrefmark}
+\def\PARstart{\@IEEElegacywarn{PARstart}{IEEEPARstart}\IEEEPARstart}
+\def\pubid{\@IEEElegacywarn{pubid}{IEEEpubid}\IEEEpubid}
+\def\pubidadjcol{\@IEEElegacywarn{pubidadjcol}{IEEEpubidadjcol}\IEEEpubidadjcol}
+\def\QED{\@IEEElegacywarn{QED}{IEEEQED}\IEEEQED}
+\def\QEDclosed{\@IEEElegacywarn{QEDclosed}{IEEEQEDclosed}\IEEEQEDclosed}
+\def\QEDopen{\@IEEElegacywarn{QEDopen}{IEEEQEDopen}\IEEEQEDopen}
+\def\specialpapernotice{\@IEEElegacywarn{specialpapernotice}{IEEEspecialpapernotice}\IEEEspecialpapernotice}
+
+
+
+% provide for legacy environments
+\def\biography{\@IEEElegacywarn{biography}{IEEEbiography}\IEEEbiography}
+\def\biographynophoto{\@IEEElegacywarn{biographynophoto}{IEEEbiographynophoto}\IEEEbiographynophoto}
+\def\keywords{\@IEEElegacywarn{keywords}{IEEEkeywords}\IEEEkeywords}
+\def\endbiography{\endIEEEbiography}
+\def\endbiographynophoto{\endIEEEbiographynophoto}
+\def\endkeywords{\endIEEEkeywords}
+
+
+% provide for legacy IED commands/lengths when possible
+\let\labelindent\IEEElabelindent
+\def\calcleftmargin{\@IEEElegacywarn{calcleftmargin}{IEEEcalcleftmargin}\IEEEcalcleftmargin}
+\def\setlabelwidth{\@IEEElegacywarn{setlabelwidth}{IEEEsetlabelwidth}\IEEEsetlabelwidth}
+\def\usemathlabelsep{\@IEEElegacywarn{usemathlabelsep}{IEEEusemathlabelsep}\IEEEusemathlabelsep}
+\def\iedlabeljustifyc{\@IEEElegacywarn{iedlabeljustifyc}{IEEEiedlabeljustifyc}\IEEEiedlabeljustifyc}
+\def\iedlabeljustifyl{\@IEEElegacywarn{iedlabeljustifyl}{IEEEiedlabeljustifyl}\IEEEiedlabeljustifyl}
+\def\iedlabeljustifyr{\@IEEElegacywarn{iedlabeljustifyr}{IEEEiedlabeljustifyr}\IEEEiedlabeljustifyr}
+
+
+
+% let \proof use the IEEEtran version even after amsthm is loaded
+% \proof is now deprecated in favor of \IEEEproof
+\AtBeginDocument{\def\proof{\@IEEElegacywarn{proof}{IEEEproof}\IEEEproof}\def\endproof{\endIEEEproof}}
+
+% V1.7 \overrideIEEEmargins is no longer supported.
+\def\overrideIEEEmargins{%
+\typeout{** WARNING: \string\overrideIEEEmargins \space no longer supported (line \the\inputlineno).}%
+\typeout{** Use the \string\CLASSINPUTinnersidemargin, \string\CLASSINPUToutersidemargin \space controls instead.}}
+
+
+\endinput
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%% End of IEEEtran.cls %%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% That's all folks!
+
diff --git a/relazioni/wireless/bare_adv.tex b/relazioni/wireless/bare_adv.tex
new file mode 100644
index 0000000..de97ffa
--- /dev/null
+++ b/relazioni/wireless/bare_adv.tex
@@ -0,0 +1,1100 @@
+
+%% bare_adv.tex
+%% V1.3
+%% 2007/01/11
+%% by Michael Shell
+%% See:
+%% http://www.michaelshell.org/
+%% for current contact information.
+%%
+%% This is a skeleton file demonstrating the advanced use of IEEEtran.cls
+%% (requires IEEEtran.cls version 1.7 or later) with an IEEE Computer
+%% Society journal paper.
+%%
+%% Support sites:
+%% http://www.michaelshell.org/tex/ieeetran/
+%% http://www.ctan.org/tex-archive/macros/latex/contrib/IEEEtran/
+%% and
+%% http://www.ieee.org/
+
+%%*************************************************************************
+%% Legal Notice:
+%% This code is offered as-is without any warranty either expressed or
+%% implied; without even the implied warranty of MERCHANTABILITY or
+%% FITNESS FOR A PARTICULAR PURPOSE!
+%% User assumes all risk.
+%% In no event shall IEEE or any contributor to this code be liable for
+%% any damages or losses, including, but not limited to, incidental,
+%% consequential, or any other damages, resulting from the use or misuse
+%% of any information contained here.
+%%
+%% All comments are the opinions of their respective authors and are not
+%% necessarily endorsed by the IEEE.
+%%
+%% This work is distributed under the LaTeX Project Public License (LPPL)
+%% ( http://www.latex-project.org/ ) version 1.3, and may be freely used,
+%% distributed and modified. A copy of the LPPL, version 1.3, is included
+%% in the base LaTeX documentation of all distributions of LaTeX released
+%% 2003/12/01 or later.
+%% Retain all contribution notices and credits.
+%% ** Modified files should be clearly indicated as such, including **
+%% ** renaming them and changing author support contact information. **
+%%
+%% File list of work: IEEEtran.cls, IEEEtran_HOWTO.pdf, bare_adv.tex,
+%% bare_conf.tex, bare_jrnl.tex, bare_jrnl_compsoc.tex
+%%*************************************************************************
+
+% *** Authors should verify (and, if needed, correct) their LaTeX system ***
+% *** with the testflow diagnostic prior to trusting their LaTeX platform ***
+% *** with production work. IEEE's font choices can trigger bugs that do ***
+% *** not appear when using other class files. ***
+% The testflow support page is at:
+% http://www.michaelshell.org/tex/testflow/
+
+
+
+% IEEEtran V1.7 and later provides for these CLASSINPUT macros to allow the
+% user to reprogram some IEEEtran.cls defaults if needed. These settings
+% override the internal defaults of IEEEtran.cls regardless of which class
+% options are used. Do not use these unless you have good reason to do so as
+% they can result in nonIEEE compliant documents. User beware. ;)
+%
+%\newcommand{\CLASSINPUTbaselinestretch}{1.0} % baselinestretch
+%\newcommand{\CLASSINPUTinnersidemargin}{1in} % inner side margin
+%\newcommand{\CLASSINPUToutersidemargin}{1in} % outer side margin
+%\newcommand{\CLASSINPUTtoptextmargin}{1in} % top text margin
+%\newcommand{\CLASSINPUTbottomtextmargin}{1in}% bottom text margin
+
+
+
+% Note that the a4paper option is mainly intended so that authors in
+% countries using A4 can easily print to A4 and see how their papers will
+% look in print - the typesetting of the document will not typically be
+% affected with changes in paper size (but the bottom and side margins will).
+% Use the testflow package mentioned above to verify correct handling of
+% both paper sizes by the user's LaTeX system.
+%
+% Also note that the "draftcls" or "draftclsnofoot", not "draft", option
+% should be used if it is desired that the figures are to be displayed in
+% draft mode.
+%
+\documentclass[12pt,journal,compsoc]{IEEEtran}
+% The Computer Society requires 12pt.
+% If IEEEtran.cls has not been installed into the LaTeX system files,
+% manually specify the path to it like:
+% \documentclass[10pt,journal,compsoc]{../sty/IEEEtran}
+
+
+% For Computer Society journals, IEEEtran defaults to the use of
+% Palatino/Palladio as is done in IEEE Computer Society journals.
+% To go back to Times Roman, you can use this code:
+%\renewcommand{\rmdefault}{ptm}\selectfont
+
+
+
+
+
+% Some very useful LaTeX packages include:
+% (uncomment the ones you want to load)
+
+
+
+% *** MISC UTILITY PACKAGES ***
+%
+%\usepackage{ifpdf}
+% Heiko Oberdiek's ifpdf.sty is very useful if you need conditional
+% compilation based on whether the output is pdf or dvi.
+% usage:
+% \ifpdf
+% % pdf code
+% \else
+% % dvi code
+% \fi
+% The latest version of ifpdf.sty can be obtained from:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/oberdiek/
+% Also, note that IEEEtran.cls V1.7 and later provides a builtin
+% \ifCLASSINFOpdf conditional that works the same way.
+% When switching from latex to pdflatex and vice-versa, the compiler may
+% have to be run twice to clear warning/error messages.
+
+
+
+
+
+
+% *** CITATION PACKAGES ***
+%
+\ifCLASSOPTIONcompsoc
+ % IEEE Computer Society needs nocompress option
+ % requires cite.sty v4.0 or later (November 2003)
+ % \usepackage[nocompress]{cite}
+\else
+ % normal IEEE
+ % \usepackage{cite}
+\fi
+% cite.sty was written by Donald Arseneau
+% V1.6 and later of IEEEtran pre-defines the format of the cite.sty package
+% \cite{} output to follow that of IEEE. Loading the cite package will
+% result in citation numbers being automatically sorted and properly
+% "compressed/ranged". e.g., [1], [9], [2], [7], [5], [6] without using
+% cite.sty will become [1], [2], [5]--[7], [9] using cite.sty. cite.sty's
+% \cite will automatically add leading space, if needed. Use cite.sty's
+% noadjust option (cite.sty V3.8 and later) if you want to turn this off.
+% cite.sty is already installed on most LaTeX systems. Be sure and use
+% version 4.0 (2003-05-27) and later if using hyperref.sty. cite.sty does
+% not currently provide for hyperlinked citations.
+% The latest version can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/cite/
+% The documentation is contained in the cite.sty file itself.
+%
+% Note that some packages require special options to format as the Computer
+% Society requires. In particular, Computer Society papers do not use
+% compressed citation ranges as is done in typical IEEE papers
+% (e.g., [1]-[4]). Instead, they list every citation separately in order
+% (e.g., [1], [2], [3], [4]). To get the latter we need to load the cite
+% package with the nocompress option which is supported by cite.sty v4.0
+% and later. Note also the use of a CLASSOPTION conditional provided by
+% IEEEtran.cls V1.7 and later.
+
+
+
+
+
+% *** GRAPHICS RELATED PACKAGES ***
+%
+\ifCLASSINFOpdf
+ % \usepackage[pdftex]{graphicx}
+ % declare the path(s) where your graphic files are
+ % \graphicspath{{../pdf/}{../jpeg/}}
+ % and their extensions so you won't have to specify these with
+ % every instance of \includegraphics
+ % \DeclareGraphicsExtensions{.pdf,.jpeg,.png}
+\else
+ % or other class option (dvipsone, dvipdf, if not using dvips). graphicx
+ % will default to the driver specified in the system graphics.cfg if no
+ % driver is specified.
+ % \usepackage[dvips]{graphicx}
+ % declare the path(s) where your graphic files are
+ % \graphicspath{{../eps/}}
+ % and their extensions so you won't have to specify these with
+ % every instance of \includegraphics
+ % \DeclareGraphicsExtensions{.eps}
+\fi
+% graphicx was written by David Carlisle and Sebastian Rahtz. It is
+% required if you want graphics, photos, etc. graphicx.sty is already
+% installed on most LaTeX systems. The latest version and documentation can
+% be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/required/graphics/
+% Another good source of documentation is "Using Imported Graphics in
+% LaTeX2e" by Keith Reckdahl which can be found as epslatex.ps or
+% epslatex.pdf at: http://www.ctan.org/tex-archive/info/
+%
+% latex, and pdflatex in dvi mode, support graphics in encapsulated
+% postscript (.eps) format. pdflatex in pdf mode supports graphics
+% in .pdf, .jpeg, .png and .mps (metapost) formats. Users should ensure
+% that all non-photo figures use a vector format (.eps, .pdf, .mps) and
+% not a bitmapped formats (.jpeg, .png). IEEE frowns on bitmapped formats
+% which can result in "jaggedy"/blurry rendering of lines and letters as
+% well as large increases in file sizes.
+%
+% You can find documentation about the pdfTeX application at:
+% http://www.tug.org/applications/pdftex
+
+
+
+%\usepackage{ps4pdf}
+% dvi->ps workflow is required to use such packages as psfrag.sty and
+% pstricks.sty. However, Rolf Niepraschk's ps4pdf.sty provides a way to
+% apply psfrag/pstricks effects to .eps figures and then get the resultant
+% figures in .pdf form. Thus, providing an easier way for migrating from
+% .eps to .pdf figures. After ps4pdf.sty loads, if:
+% 1. producing .dvi output: the output file will consist ONLY of the
+% figures (or other constructs encased within \PSforPDF commands)
+% 2. producing .pdf output: pdflatex will look in the filename-pics.pdf
+% file, where filename is the basename of the tex document, for the
+% graphics (or other constructs encased within \PSforPDF commands).
+% NOTE: If you ever change your figures, you must remember to remake
+% the filename-pics.pdf file.
+%
+% This way you can do a:
+%
+% latex filename
+% dvips -Ppdf -o filename-pics.ps filename.dvi
+% ps2pdf filename-pics.ps filename-pics.pdf
+%
+% to produce a filename-pics.pdf graphics container that contains
+% .pdf versions of the graphics with psfrag, pstricks, etc. features.
+% Note that you will not typically be able to view the figures in
+% filename-pics.ps because of an offset. However, you will be able to
+% view them in filename-pics.pdf. Also, note that when ps4pdf is in effect
+% with .dvi output, you may get harmless over/under full box warnings -
+% ignore them.
+% Then, run pdflatex:
+%
+% pdflatex filename
+%
+% to use pdflatex to make PDF output, automatically using the figures in
+% filename-pics.pdf. Alternatively, you could use dvips -i option to
+% obtain separate .pdf files for each figure:
+%
+% dvips -Ppdf -i -E -o fig filename
+%
+% then convert each figure to pdf via a command such as epstopdf and then
+% use pdflatex with these pdf figures and then to dispense with ps4pdf.
+%
+% Remember to rerun through latex/dvips/ps2pdf if you ever change your
+% figures so that filename-pics.pdf gets updated.
+% ps4pdf requires David Kastrup's preview-latex and a recent LaTeX system
+% (circa 2001 or later). The ps4pdf package and documentation can be
+% obtained at: http://www.ctan.org/tex-archive/macros/latex/contrib/ps4pdf/
+% The preview-latex package and documentation can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/preview/
+%
+% provide a bogus \PSforPDF, even when not loading pd4pdf. This way we can
+% stop loading ps4pdf.sty if we choose to make separate .pdf versions of
+% each of our figures.
+\providecommand{\PSforPDF}[1]{#1}
+% Note that in order for ps4pdf to work, all commands related to psfrag,
+% pstricks, etc. must be called within the PSforPDF command. This applies
+% even when *loading* via \usepackage psfrag.sty, etc.
+
+
+%\PSforPDF{\usepackage{psfrag}}
+% psfrag.sty was written by Craig Barratt, Michael C. Grant, and
+% David Carlisle. It allows you to substitute LaTeX commands for text in
+% imported EPS graphic files. In this way, LaTeX symbols can be placed into
+% graphics that have been generated by other applications. You must use
+% latex->dvips->ps2pdf workflow (not direct pdf output from pdflatex) if
+% you wish to use this capability because it works via some PostScript
+% tricks. Alternatively, the graphics could be processed as separate files
+% via psfrag and dvips, then converted to PDF for inclusion in the main file
+% which uses pdflatex. ps4pdf.sty (above) provides a way of doing this all
+% at once within the main file.
+% Docs are in "The PSfrag System" by Michael C. Grant and David Carlisle.
+% There is also some information about using psfrag in "Using Imported
+% Graphics in LaTeX2e" by Keith Reckdahl which documents the graphicx
+% package (see above). The psfrag package and documentation can be obtained
+% at: http://www.ctan.org/tex-archive/macros/latex/contrib/psfrag/
+%
+% Note that the current version of psfrag does not "turn itself off" when
+% running under pdf output. This will result in a harmless warning
+% about a non-PDF \special. However, to silence this, a bogus psfrag
+% command can be provided instead of loading psfrag.sty when PDF output
+% is being used. Thus, a more complex alternative conditional loading scheme
+% can be employed instead of the straightforword way above:
+%
+%\ifCLASSINFOpdf
+% if outputting PDF, do not use or load psfrag.sty as current versions
+% output a non-PDF special that generates a harmless, but annoying warning.
+% Instead, we provide a bogus \psfrag command that does nothing with
+% its arguments. This is a tad tricky because \psfrag can have up to six
+% arguments four of which are optional: \psfrag{}[][][][]{}
+% Code based on that in psfrag.sty
+%\makeatletter
+%\def\psfrag{\@ifstar{\@BOGUSpsfraga}{\@BOGUSpsfraga}}
+%\def\@BOGUSpsfraga{\begingroup
+% \@makeother\"\@makeother\*\@makeother\!\@makeother\~%
+% \@makeother\:\@makeother\\\@makeother\%\@makeother\#%
+% \@makeother\ \@BOGUSpsfragb}
+%\def\@BOGUSpsfragb#1{\endgroup
+% \@ifnextchar [{\@BOGUSpsfragc}%
+% {\@BOGUSpsfrag}}
+%\def\@BOGUSpsfragc[#1]{\@ifnextchar [{\@BOGUSpsfragd}%
+% {\@BOGUSpsfrag}}
+%\def\@BOGUSpsfragd[#1]{\@ifnextchar [{\@BOGUSpsfrage}%
+% {\@BOGUSpsfrag}}
+%\def\@BOGUSpsfrage[#1]{\@ifnextchar [{\@BOGUSpsfragf}%
+% {\@BOGUSpsfrag}}
+%\def\@BOGUSpsfragf[#1]{\@BOGUSpsfrag}
+%\def\@BOGUSpsfrag#1{\ignorespaces}
+%\makeatother
+%\else
+% using dvi output, load psfrag, but funnel it through PSforPDF
+% as required by ps4pdf.sty
+%\PSforPDF{\usepackage{psfrag}}
+%\fi
+
+
+
+
+
+% *** MATH PACKAGES ***
+%
+%\usepackage[cmex10]{amsmath}
+% A popular package from the American Mathematical Society that provides
+% many useful and powerful commands for dealing with mathematics. If using
+% it, be sure to load this package with the cmex10 option to ensure that
+% only type 1 fonts will utilized at all point sizes. Without this option,
+% it is possible that some math symbols, particularly those within
+% footnotes, will be rendered in bitmap form which will result in a
+% document that can not be IEEE Xplore compliant!
+%
+% Also, note that the amsmath package sets \interdisplaylinepenalty to 10000
+% thus preventing page breaks from occurring within multiline equations. Use:
+%\interdisplaylinepenalty=2500
+% after loading amsmath to restore such page breaks as IEEEtran.cls normally
+% does. amsmath.sty is already installed on most LaTeX systems. The latest
+% version and documentation can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/required/amslatex/math/
+
+
+
+
+
+% *** SPECIALIZED LIST PACKAGES ***
+%\usepackage{acronym}
+% acronym.sty was written by Tobias Oetiker. This package provides tools for
+% managing documents with large numbers of acronyms. (You don't *have* to
+% use this package - unless you have a lot of acronyms, you may feel that
+% such package management of them is bit of an overkill.)
+% Do note that the acronym environment (which lists acronyms) will have a
+% problem when used under IEEEtran.cls because acronym.sty relies on the
+% description list environment - which IEEEtran.cls has customized for
+% producing IEEE style lists. A workaround is to declared the longest
+% label width via the IEEEtran.cls \IEEEiedlistdecl global control:
+%
+% \renewcommand{\IEEEiedlistdecl}{\IEEEsetlabelwidth{SONET}}
+% \begin{acronym}
+%
+% \end{acronym}
+% \renewcommand{\IEEEiedlistdecl}{\relax}% remember to reset \IEEEiedlistdecl
+%
+% instead of using the acronym environment's optional argument.
+% The latest version and documentation can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/acronym/
+
+
+%\usepackage{algorithmic}
+% algorithmic.sty was written by Peter Williams and Rogerio Brito.
+% This package provides an algorithmic environment fo describing algorithms.
+% You can use the algorithmic environment in-text or within a figure
+% environment to provide for a floating algorithm. Do NOT use the algorithm
+% floating environment provided by algorithm.sty (by the same authors) or
+% algorithm2e.sty (by Christophe Fiorio) as IEEE does not use dedicated
+% algorithm float types and packages that provide these will not provide
+% correct IEEE style captions. The latest version and documentation of
+% algorithmic.sty can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/algorithms/
+% There is also a support site at:
+% http://algorithms.berlios.de/index.html
+% Also of interest may be the (relatively newer and more customizable)
+% algorithmicx.sty package by Szasz Janos:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/algorithmicx/
+
+
+
+
+% *** ALIGNMENT PACKAGES ***
+%
+%\usepackage{array}
+% Frank Mittelbach's and David Carlisle's array.sty patches and improves
+% the standard LaTeX2e array and tabular environments to provide better
+% appearance and additional user controls. As the default LaTeX2e table
+% generation code is lacking to the point of almost being broken with
+% respect to the quality of the end results, all users are strongly
+% advised to use an enhanced (at the very least that provided by array.sty)
+% set of table tools. array.sty is already installed on most systems. The
+% latest version and documentation can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/required/tools/
+
+
+%\usepackage{mdwmath}
+%\usepackage{mdwtab}
+% Also highly recommended is Mark Wooding's extremely powerful MDW tools,
+% especially mdwmath.sty and mdwtab.sty which are used to format equations
+% and tables, respectively. The MDWtools set is already installed on most
+% LaTeX systems. The lastest version and documentation is available at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/mdwtools/
+
+
+% IEEEtran contains the IEEEeqnarray family of commands that can be used to
+% generate multiline equations as well as matrices, tables, etc., of high
+% quality.
+
+
+%\usepackage{eqparbox}
+% Also of notable interest is Scott Pakin's eqparbox package for creating
+% (automatically sized) equal width boxes - aka "natural width parboxes".
+% Available at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/eqparbox/
+
+
+
+
+
+% *** SUBFIGURE PACKAGES ***
+%\ifCLASSOPTIONcompsoc
+%\usepackage[tight,normalsize,sf,SF]{subfigure}
+%\else
+%\usepackage[tight,footnotesize]{subfigure}
+%\fi
+% subfigure.sty was written by Steven Douglas Cochran. This package makes it
+% easy to put subfigures in your figures. e.g., "Figure 1a and 1b". For IEEE
+% work, it is a good idea to load it with the tight package option to reduce
+% the amount of white space around the subfigures. Computer Society papers
+% use a larger font and \sffamily font for their captions, hence the
+% additional options needed under compsoc mode. subfigure.sty is already
+% installed on most LaTeX systems. The latest version and documentation can
+% be obtained at:
+% http://www.ctan.org/tex-archive/obsolete/macros/latex/contrib/subfigure/
+% subfigure.sty has been superceeded by subfig.sty.
+
+
+%\ifCLASSOPTIONcompsoc
+% \usepackage[caption=false]{caption}
+% \usepackage[font=normalsize,labelfont=sf,textfont=sf]{subfig}
+%\else
+% \usepackage[caption=false]{caption}
+% \usepackage[font=footnotesize]{subfig}
+%\fi
+% subfig.sty, also written by Steven Douglas Cochran, is the modern
+% replacement for subfigure.sty. However, subfig.sty requires and
+% automatically loads Axel Sommerfeldt's caption.sty which will override
+% IEEEtran.cls handling of captions and this will result in nonIEEE style
+% figure/table captions. To prevent this problem, be sure and preload
+% caption.sty with its "caption=false" package option. This is will preserve
+% IEEEtran.cls handing of captions. Version 1.3 (2005/06/28) and later
+% (recommended due to many improvements over 1.2) of subfig.sty supports
+% the caption=false option directly:
+%\ifCLASSOPTIONcompsoc
+% \usepackage[caption=false,font=normalsize,labelfont=sf,textfont=sf]{subfig}
+%\else
+% \usepackage[caption=false,font=footnotesize]{subfig}
+%\fi
+%
+% The latest version and documentation can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/subfig/
+% The latest version and documentation of caption.sty can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/caption/
+
+
+
+
+% *** FLOAT PACKAGES ***
+%
+%\usepackage{fixltx2e}
+% fixltx2e, the successor to the earlier fix2col.sty, was written by
+% Frank Mittelbach and David Carlisle. This package corrects a few problems
+% in the LaTeX2e kernel, the most notable of which is that in current
+% LaTeX2e releases, the ordering of single and double column floats is not
+% guaranteed to be preserved. Thus, an unpatched LaTeX2e can allow a
+% single column figure to be placed prior to an earlier double column
+% figure. The latest version and documentation can be found at:
+% http://www.ctan.org/tex-archive/macros/latex/base/
+
+
+%\usepackage{stfloats}
+% stfloats.sty was written by Sigitas Tolusis. This package gives LaTeX2e
+% the ability to do double column floats at the bottom of the page as well
+% as the top. (e.g., "\begin{figure*}[!b]" is not normally possible in
+% LaTeX2e). It also provides a command:
+%\fnbelowfloat
+% to enable the placement of footnotes below bottom floats (the standard
+% LaTeX2e kernel puts them above bottom floats). This is an invasive package
+% which rewrites many portions of the LaTeX2e float routines. It may not work
+% with other packages that modify the LaTeX2e float routines. The latest
+% version and documentation can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/sttools/
+% Documentation is contained in the stfloats.sty comments as well as in the
+% presfull.pdf file. Do not use the stfloats baselinefloat ability as IEEE
+% does not allow \baselineskip to stretch. Authors submitting work to the
+% IEEE should note that IEEE rarely uses double column equations and
+% that authors should try to avoid such use. Do not be tempted to use the
+% cuted.sty or midfloat.sty packages (also by Sigitas Tolusis) as IEEE does
+% not format its papers in such ways.
+
+
+%\ifCLASSOPTIONcaptionsoff
+% \usepackage[nomarkers]{endfloat}
+% \let\MYoriglatexcaption\caption
+% \renewcommand{\caption}[2][\relax]{\MYoriglatexcaption[#2]{#2}}
+%\fi
+% endfloat.sty was written by James Darrell McCauley and Jeff Goldberg.
+% This package may be useful when used in conjunction with IEEEtran.cls'
+% captionsoff option. Some IEEE journals/societies require that submissions
+% have lists of figures/tables at the end of the paper and that
+% figures/tables without any captions are placed on a page by themselves at
+% the end of the document. If needed, the draftcls IEEEtran class option or
+% \CLASSINPUTbaselinestretch interface can be used to increase the line
+% spacing as well. Be sure and use the nomarkers option of endfloat to
+% prevent endfloat from "marking" where the figures would have been placed
+% in the text. The two hack lines of code above are a slight modification of
+% that suggested by in the endfloat docs (section 8.3.1) to ensure that
+% the full captions always appear in the list of figures/tables - even if
+% the user used the short optional argument of \caption[]{}.
+% IEEE papers do not typically make use of \caption[]'s optional argument,
+% so this should not be an issue. A similar trick can be used to disable
+% captions of packages such as subfig.sty that lack options to turn off
+% the subcaptions:
+% For subfig.sty:
+% \let\MYorigsubfloat\subfloat
+% \renewcommand{\subfloat}[2][\relax]{\MYorigsubfloat[]{#2}}
+% For subfigure.sty:
+% \let\MYorigsubfigure\subfigure
+% \renewcommand{\subfigure}[2][\relax]{\MYorigsubfigure[]{#2}}
+% However, the above trick will not work if both optional arguments of
+% the \subfloat/subfig command are used. Furthermore, there needs to be a
+% description of each subfigure *somewhere* and endfloat does not add
+% subfigure captions to its list of figures. Thus, the best approach is to
+% avoid the use of subfigure captions (many IEEE journals avoid them anyway)
+% and instead reference/explain all the subfigures within the main caption.
+% The latest version of endfloat.sty and its documentation can obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/endfloat/
+%
+% The IEEEtran \ifCLASSOPTIONcaptionsoff conditional can also be used
+% later in the document, say, to conditionally put the References on a
+% page by themselves.
+
+
+
+
+
+% *** PDF, URL AND HYPERLINK PACKAGES ***
+%
+%\usepackage{url}
+% url.sty was written by Donald Arseneau. It provides better support for
+% handling and breaking URLs. url.sty is already installed on most LaTeX
+% systems. The latest version can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/misc/
+% Read the url.sty source comments for usage information. Basically,
+% \url{my_url_here}.
+
+
+% NOTE: PDF thumbnail features are not required in IEEE papers
+% and their use requires extra complexity and work.
+%\ifCLASSINFOpdf
+% \usepackage[pdftex]{thumbpdf}
+%\else
+% \usepackage[dvips]{thumbpdf}
+%\fi
+% thumbpdf.sty and its companion Perl utility were written by Heiko Oberdiek.
+% It allows the user a way to produce PDF documents that contain fancy
+% thumbnail images of each of the pages (which tools like acrobat reader can
+% utilize). This is possible even when using dvi->ps->pdf workflow if the
+% correct thumbpdf driver options are used. thumbpdf.sty incorporates the
+% file containing the PDF thumbnail information (filename.tpm is used with
+% dvips, filename.tpt is used with pdftex, where filename is the base name of
+% your tex document) into the final ps or pdf output document. An external
+% utility, the thumbpdf *Perl script* is needed to make these .tpm or .tpt
+% thumbnail files from a .ps or .pdf version of the document (which obviously
+% does not yet contain pdf thumbnails). Thus, one does a:
+%
+% thumbpdf filename.pdf
+%
+% to make a filename.tpt, and:
+%
+% thumbpdf --mode dvips filename.ps
+%
+% to make a filename.tpm which will then be loaded into the document by
+% thumbpdf.sty the NEXT time the document is compiled (by pdflatex or
+% latex->dvips->ps2pdf). Users must be careful to regenerate the .tpt and/or
+% .tpm files if the main document changes and then to recompile the
+% document to incorporate the revised thumbnails to ensure that thumbnails
+% match the actual pages. It is easy to forget to do this!
+%
+% Unix systems come with a Perl interpreter. However, MS Windows users
+% will usually have to install a Perl interpreter so that the thumbpdf
+% script can be run. The Ghostscript PS/PDF interpreter is also required.
+% See the thumbpdf docs for details. The latest version and documentation
+% can be obtained at.
+% http://www.ctan.org/tex-archive/support/thumbpdf/
+% Be sure and use only version 3.8 (2005/07/06) or later of thumbpdf as
+% earlier versions will not work properly with recent versions of pdfTeX
+% (1.20a and later).
+
+
+% NOTE: PDF hyperlink and bookmark features are not required in IEEE
+% papers and their use requires extra complexity and work.
+% *** IF USING HYPERREF BE SURE AND CHANGE THE EXAMPLE PDF ***
+% *** TITLE/SUBJECT/AUTHOR/KEYWORDS INFO BELOW!! ***
+\newcommand\MYhyperrefoptions{bookmarks=true,bookmarksnumbered=true,
+pdfpagemode={UseOutlines},plainpages=false,pdfpagelabels=true,
+colorlinks=true,linkcolor={black},citecolor={black},pagecolor={black},
+urlcolor={black},
+pdftitle={Bare Demo of IEEEtran.cls for Computer Society Journals},%<!CHANGE!
+pdfsubject={Typesetting},%<!CHANGE!
+pdfauthor={Michael D. Shell},%<!CHANGE!
+pdfkeywords={Computer Society, IEEEtran, journal, LaTeX, paper,
+ template}}%<^!CHANGE!
+%\ifCLASSINFOpdf
+%\usepackage[\MYhyperrefoptions,pdftex]{hyperref}
+%\else
+%\usepackage[\MYhyperrefoptions,breaklinks=true,dvips]{hyperref}
+%\usepackage{breakurl}
+%\fi
+% One significant drawback of using hyperref under DVI output is that the
+% LaTeX compiler cannot break URLs across lines or pages as can be done
+% under pdfLaTeX's PDF output via the hyperref pdftex driver. This is
+% probably the single most important capability distinction between the
+% DVI and PDF output. Perhaps surprisingly, all the other PDF features
+% (PDF bookmarks, thumbnails, etc.) can be preserved in
+% .tex->.dvi->.ps->.pdf workflow if the respective packages/scripts are
+% loaded/invoked with the correct driver options (dvips, etc.).
+% As most IEEE papers use URLs sparingly (mainly in the references), this
+% may not be as big an issue as with other publications.
+%
+% That said, recently Vilar Camara Neto introduced his breakurl.sty
+% package which permits hyperref to easily break URLs even in dvi
+% mode. Note that breakurl, unlike most other packages, must be loaded
+% AFTER hyperref. The latest version of breakurl and its documentation can
+% be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/breakurl/
+% breakurl.sty is not for use under pdflatex pdf mode. Versions 1.10
+% (September 23, 2005) and later are recommened to avoid bugs in earlier
+% releases.
+%
+% The advanced features offer by hyperref.sty are not required for IEEE
+% submission, so users should weigh these features against the added
+% complexity of use. Users who wish to use hyperref *must* ensure that
+% their hyperref version is 6.72u or later *and* IEEEtran.cls is version
+% 1.6b or later.
+% The package options above demonstrate how to enable PDF bookmarks
+% (a type of table of contents viewable in Acrobat Reader) as well as
+% PDF document information (title, subject, author and keywords) that is
+% viewable in Acrobat reader's Document_Properties menu. PDF document
+% information is also used extensively to automate the cataloging of PDF
+% documents. The above set of options ensures that hyperlinks will not be
+% colored in the text and thus will not be visible in the printed page,
+% but will be active on "mouse over". USING COLORS OR OTHER HIGHLIGHTING
+% OF HYPERLINKS CAN RESULT IN DOCUMENT REJECTION BY THE IEEE, especially if
+% these appear on the "printed" page. IF IN DOUBT, ASK THE RELEVANT
+% SUBMISSION EDITOR. You may need to add the option hypertexnames=false if
+% you used duplicate equation numbers, etc., but this should not be needed
+% in normal IEEE work.
+% The latest version of hyperref and its documentation can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/hyperref/
+
+
+
+
+
+% *** Do not adjust lengths that control margins, column widths, etc. ***
+% *** Do not use packages that alter fonts (such as pslatex). ***
+% There should be no need to do such things with IEEEtran.cls V1.6 and later.
+% (Unless specifically asked to do so by the journal or conference you plan
+% to submit to, of course. )
+
+
+% correct bad hyphenation here
+\hyphenation{op-tical net-works semi-conduc-tor}
+
+
+\begin{document}
+%
+% paper title
+% can use linebreaks \\ within to get better formatting as desired
+\title{Bare Advanced Demo of IEEEtran.cls\\ for Computer Society Journals}
+%
+%
+% author names and IEEE memberships
+% note positions of commas and nonbreaking spaces ( ~ ) LaTeX will not break
+% a structure at a ~ so this keeps an author's name from being broken across
+% two lines.
+% use \thanks{} to gain access to the first footnote area
+% a separate \thanks must be used for each paragraph as LaTeX2e's \thanks
+% was not built to handle multiple paragraphs
+%
+%
+%\IEEEcompsocitemizethanks is a special \thanks that produces the bulleted
+% lists the Computer Society journals use for "first footnote" author
+% affiliations. Use \IEEEcompsocthanksitem which works much like \item
+% for each affiliation group. When not in compsoc mode,
+% \IEEEcompsocitemizethanks becomes like \thanks and
+% \IEEEcompsocthanksitem becomes a line break with idention. This
+% facilitates dual compilation, although admittedly the differences in the
+% desired content of \author between the different types of papers makes a
+% one-size-fits-all approach a daunting prospect. For instance, compsoc
+% journal papers have the author affiliations above the "Manuscript
+% received ..." text while in non-compsoc journals this is reversed. Sigh.
+
+\author{Michael~Shell,~\IEEEmembership{Member,~IEEE,}
+ John~Doe,~\IEEEmembership{Fellow,~OSA,}
+ and~Jane~Doe,~\IEEEmembership{Life~Fellow,~IEEE}% <-this % stops a space
+\IEEEcompsocitemizethanks{\IEEEcompsocthanksitem M. Shell is with the Department
+of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta,
+GA, 30332.\protect\\
+% note need leading \protect in front of \\ to get a newline within \thanks as
+% \\ is fragile and will error, could use \hfil\break instead.
+E-mail: see http://www.michaelshell.org/contact.html
+\IEEEcompsocthanksitem J. Doe and J. Doe are with Anonymous University.}% <-this % stops a space
+\thanks{Manuscript received April 19, 2005; revised January 11, 2007.}}
+
+% note the % following the last \IEEEmembership and also \thanks -
+% these prevent an unwanted space from occurring between the last author name
+% and the end of the author line. i.e., if you had this:
+%
+% \author{....lastname \thanks{...} \thanks{...} }
+% ^------------^------------^----Do not want these spaces!
+%
+% a space would be appended to the last name and could cause every name on that
+% line to be shifted left slightly. This is one of those "LaTeX things". For
+% instance, "\textbf{A} \textbf{B}" will typeset as "A B" not "AB". To get
+% "AB" then you have to do: "\textbf{A}\textbf{B}"
+% \thanks is no different in this regard, so shield the last } of each \thanks
+% that ends a line with a % and do not let a space in before the next \thanks.
+% Spaces after \IEEEmembership other than the last one are OK (and needed) as
+% you are supposed to have spaces between the names. For what it is worth,
+% this is a minor point as most people would not even notice if the said evil
+% space somehow managed to creep in.
+
+
+
+% The paper headers
+\markboth{Journal of \LaTeX\ Class Files,~Vol.~6, No.~1, January~2007}%
+{Shell \MakeLowercase{\textit{et al.}}: Bare Advanced Demo of IEEEtran.cls for Journals}
+% The only time the second header will appear is for the odd numbered pages
+% after the title page when using the twoside option.
+%
+% *** Note that you probably will NOT want to include the author's ***
+% *** name in the headers of peer review papers. ***
+% You can use \ifCLASSOPTIONpeerreview for conditional compilation here if
+% you desire.
+
+
+
+% The publisher's ID mark at the bottom of the page is less important with
+% Computer Society journal papers as those publications place the marks
+% outside of the main text columns and, therefore, unlike regular IEEE
+% journals, the available text space is not reduced by their presence.
+% If you want to put a publisher's ID mark on the page you can do it like
+% this:
+%\IEEEpubid{0000--0000/00\$00.00~\copyright~2007 IEEE}
+% or like this to get the Computer Society new two part style.
+%\IEEEpubid{\makebox[\columnwidth]{\hfill 0000--0000/00/\$00.00~\copyright~2007 IEEE}%
+%\hspace{\columnsep}\makebox[\columnwidth]{Published by the IEEE Computer Society\hfill}}
+% Remember, if you use this you must call \IEEEpubidadjcol in the second
+% column for its text to clear the IEEEpubid mark (Computer Society jorunal
+% papers don't need this extra clearance.)
+
+
+
+% use for special paper notices
+%\IEEEspecialpapernotice{(Invited Paper)}
+
+
+
+% for Computer Society papers, we must declare the abstract and index terms
+% PRIOR to the title within the \IEEEcompsoctitleabstractindextext IEEEtran
+% command as these need to go into the title area created by \maketitle.
+\IEEEcompsoctitleabstractindextext{%
+\begin{abstract}
+%\boldmath
+The abstract goes here.
+\end{abstract}
+% IEEEtran.cls defaults to using nonbold math in the Abstract.
+% This preserves the distinction between vectors and scalars. However,
+% if the journal you are submitting to favors bold math in the abstract,
+% then you can use LaTeX's standard command \boldmath at the very start
+% of the abstract to achieve this. Many IEEE journals frown on math
+% in the abstract anyway. In particular, the Computer Society does
+% not want either math or citations to appear in the abstract.
+
+% Note that keywords are not normally used for peerreview papers.
+\begin{IEEEkeywords}
+Computer Society, IEEEtran, journal, \LaTeX, paper, template.
+\end{IEEEkeywords}}
+
+
+% make the title area
+\maketitle
+
+
+% To allow for easy dual compilation without having to reenter the
+% abstract/keywords data, the \IEEEcompsoctitleabstractindextext text will
+% not be used in maketitle, but will appear (i.e., to be "transported")
+% here as \IEEEdisplaynotcompsoctitleabstractindextext when compsoc mode
+% is not selected <OR> if conference mode is selected - because compsoc
+% conference papers position the abstract like regular (non-compsoc)
+% papers do!
+\IEEEdisplaynotcompsoctitleabstractindextext
+% \IEEEdisplaynotcompsoctitleabstractindextext has no effect when using
+% compsoc under a non-conference mode.
+
+
+% For peer review papers, you can put extra information on the cover
+% page as needed:
+% \ifCLASSOPTIONpeerreview
+% \begin{center} \bfseries EDICS Category: 3-BBND \end{center}
+% \fi
+%
+% For peerreview papers, this IEEEtran command inserts a page break and
+% creates the second title. It will be ignored for other modes.
+\IEEEpeerreviewmaketitle
+
+
+
+\section{Introduction}
+% Computer Society journal papers do something a tad strange with the very
+% first section heading (almost always called "Introduction"). They place it
+% ABOVE the main text! IEEEtran.cls currently does not do this for you.
+% However, You can achieve this effect by making LaTeX jump through some
+% hoops via something like:
+%
+%\ifCLASSOPTIONcompsoc
+% \noindent\raisebox{2\baselineskip}[0pt][0pt]%
+% {\parbox{\columnwidth}{\section{Introduction}\label{sec:introduction}%
+% \global\everypar=\everypar}}%
+% \vspace{-1\baselineskip}\vspace{-\parskip}\par
+%\else
+% \section{Introduction}\label{sec:introduction}\par
+%\fi
+%
+% Admittedly, this is a hack and may well be fragile, but seems to do the
+% trick for me. Note the need to keep any \label that may be used right
+% after \section in the above as the hack puts \section within a raised box.
+
+
+
+% The very first letter is a 2 line initial drop letter followed
+% by the rest of the first word in caps (small caps for compsoc).
+%
+% form to use if the first word consists of a single letter:
+% \IEEEPARstart{A}{demo} file is ....
+%
+% form to use if you need the single drop letter followed by
+% normal text (unknown if ever used by IEEE):
+% \IEEEPARstart{A}{}demo file is ....
+%
+% Some journals put the first two words in caps:
+% \IEEEPARstart{T}{his demo} file is ....
+%
+% Here we have the typical use of a "T" for an initial drop letter
+% and "HIS" in caps to complete the first word.
+\IEEEPARstart{T}{his} demo file is intended to serve as a ``starter file''
+for IEEE Computer Society journal papers produced under \LaTeX\ using
+IEEEtran.cls version 1.7 and later.
+% You must have at least 2 lines in the paragraph with the drop letter
+% (should never be an issue)
+I wish you the best of success.
+
+\hfill mds
+
+\hfill January 11, 2007
+
+\subsection{Subsection Heading Here}
+Subsection text here.
+
+% needed in second column of first page if using \IEEEpubid
+%\IEEEpubidadjcol
+
+\subsubsection{Subsubsection Heading Here}
+Subsubsection text here.
+
+
+% An example of a floating figure using the graphicx package.
+% Note that \label must occur AFTER (or within) \caption.
+% For figures, \caption should occur after the \includegraphics.
+% Note that IEEEtran v1.7 and later has special internal code that
+% is designed to preserve the operation of \label within \caption
+% even when the captionsoff option is in effect. However, because
+% of issues like this, it may be the safest practice to put all your
+% \label just after \caption rather than within \caption{}.
+%
+% Reminder: the "draftcls" or "draftclsnofoot", not "draft", class
+% option should be used if it is desired that the figures are to be
+% displayed while in draft mode.
+%
+%\begin{figure}[!t]
+%\centering
+%\includegraphics[width=2.5in]{myfigure}
+% where an .eps filename suffix will be assumed under latex,
+% and a .pdf suffix will be assumed for pdflatex; or what has been declared
+% via \DeclareGraphicsExtensions.
+%\caption{Simulation Results}
+%\label{fig_sim}
+%\end{figure}
+
+% Note that IEEE typically puts floats only at the top, even when this
+% results in a large percentage of a column being occupied by floats.
+% However, the Computer Society has been known to put floats at the bottom.
+
+
+% An example of a double column floating figure using two subfigures.
+% (The subfig.sty package must be loaded for this to work.)
+% The subfigure \label commands are set within each subfloat command, the
+% \label for the overall figure must come after \caption.
+% \hfil must be used as a separator to get equal spacing.
+% The subfigure.sty package works much the same way, except \subfigure is
+% used instead of \subfloat.
+%
+%\begin{figure*}[!t]
+%\centerline{\subfloat[Case I]\includegraphics[width=2.5in]{subfigcase1}%
+%\label{fig_first_case}}
+%\hfil
+%\subfloat[Case II]{\includegraphics[width=2.5in]{subfigcase2}%
+%\label{fig_second_case}}}
+%\caption{Simulation results}
+%\label{fig_sim}
+%\end{figure*}
+%
+% Note that often IEEE papers with subfigures do not employ subfigure
+% captions (using the optional argument to \subfloat), but instead will
+% reference/describe all of them (a), (b), etc., within the main caption.
+
+
+% An example of a floating table. Note that, for IEEE style tables, the
+% \caption command should come BEFORE the table. Table text will default to
+% \footnotesize as IEEE normally uses this smaller font for tables.
+% The \label must come after \caption as always.
+%
+%\begin{table}[!t]
+%% increase table row spacing, adjust to taste
+%\renewcommand{\arraystretch}{1.3}
+% if using array.sty, it might be a good idea to tweak the value of
+% \extrarowheight as needed to properly center the text within the cells
+%\caption{An Example of a Table}
+%\label{table_example}
+%\centering
+%% Some packages, such as MDW tools, offer better commands for making tables
+%% than the plain LaTeX2e tabular which is used here.
+%\begin{tabular}{|c||c|}
+%\hline
+%One & Two\\
+%\hline
+%Three & Four\\
+%\hline
+%\end{tabular}
+%\end{table}
+
+
+% Note that IEEE does not put floats in the very first column - or typically
+% anywhere on the first page for that matter. Also, in-text middle ("here")
+% positioning is not used. Most IEEE journals use top floats exclusively.
+% However, Computer Society journals sometimes do use bottom floats - bear
+% this in mind when choosing appropriate optional arguments for the
+% figure/table environments.
+% Note that, LaTeX2e, unlike IEEE journals, places footnotes above bottom
+% floats. This can be corrected via the \fnbelowfloat command of the
+% stfloats package.
+
+
+
+\section{Conclusion}
+The conclusion goes here.
+
+
+
+
+
+% if have a single appendix:
+%\appendix[Proof of the Zonklar Equations]
+% or
+%\appendix % for no appendix heading
+% do not use \section anymore after \appendix, only \section*
+% is possibly needed
+
+% use appendices with more than one appendix
+% then use \section to start each appendix
+% you must declare a \section before using any
+% \subsection or using \label (\appendices by itself
+% starts a section numbered zero.)
+%
+
+
+\appendices
+\section{Proof of the First Zonklar Equation}
+Appendix one text goes here.
+
+% you can choose not to have a title for an appendix
+% if you want by leaving the argument blank
+\section{}
+Appendix two text goes here.
+
+
+% use section* for acknowledgement
+\ifCLASSOPTIONcompsoc
+ % The Computer Society usually uses the plural form
+ \section*{Acknowledgments}
+\else
+ % regular IEEE prefers the singular form
+ \section*{Acknowledgment}
+\fi
+
+
+The authors would like to thank...
+
+
+% Can use something like this to put references on a page
+% by themselves when using endfloat and the captionsoff option.
+\ifCLASSOPTIONcaptionsoff
+ \newpage
+\fi
+
+
+
+% trigger a \newpage just before the given reference
+% number - used to balance the columns on the last page
+% adjust value as needed - may need to be readjusted if
+% the document is modified later
+%\IEEEtriggeratref{8}
+% The "triggered" command can be changed if desired:
+%\IEEEtriggercmd{\enlargethispage{-5in}}
+
+% references section
+
+% can use a bibliography generated by BibTeX as a .bbl file
+% BibTeX documentation can be easily obtained at:
+% http://www.ctan.org/tex-archive/biblio/bibtex/contrib/doc/
+% The IEEEtran BibTeX style support page is at:
+% http://www.michaelshell.org/tex/ieeetran/bibtex/
+%\bibliographystyle{IEEEtran}
+% argument is your BibTeX string definitions and bibliography database(s)
+%\bibliography{IEEEabrv,../bib/paper}
+%
+% <OR> manually copy in the resultant .bbl file
+% set second argument of \begin to the number of references
+% (used to reserve space for the reference number labels box)
+\begin{thebibliography}{1}
+
+\bibitem{IEEEhowto:kopka}
+H.~Kopka and P.~W. Daly, \emph{A Guide to {\LaTeX}}, 3rd~ed.\hskip 1em plus
+ 0.5em minus 0.4em\relax Harlow, England: Addison-Wesley, 1999.
+
+\end{thebibliography}
+
+% biography section
+%
+% If you have an EPS/PDF photo (graphicx package needed) extra braces are
+% needed around the contents of the optional argument to biography to prevent
+% the LaTeX parser from getting confused when it sees the complicated
+% \includegraphics command within an optional argument. (You could create
+% your own custom macro containing the \includegraphics command to make things
+% simpler here.)
+%\begin{biography}[{\includegraphics[width=1in,height=1.25in,clip,keepaspectratio]{mshell}}]{Michael Shell}
+% or if you just want to reserve a space for a photo:
+
+\begin{IEEEbiography}{Michael Shell}
+Biography text here.
+\end{IEEEbiography}
+
+% if you will not have a photo at all:
+\begin{IEEEbiographynophoto}{John Doe}
+Biography text here.
+\end{IEEEbiographynophoto}
+
+% insert where needed to balance the two columns on the last page with
+% biographies
+%\newpage
+
+\begin{IEEEbiographynophoto}{Jane Doe}
+Biography text here.
+\end{IEEEbiographynophoto}
+
+% You can push biographies down or up by placing
+% a \vfill before or after them. The appropriate
+% use of \vfill depends on what kind of text is
+% on the last page and whether or not the columns
+% are being equalized.
+
+%\vfill
+
+% Can be used to pull up biographies so that the bottom of the last one
+% is flush with the other column.
+%\enlargethispage{-5in}
+
+
+
+% that's all folks
+\end{document}
+
+
diff --git a/relazioni/wireless/bare_jrnl.tex b/relazioni/wireless/bare_jrnl.tex
new file mode 100644
index 0000000..09c2560
--- /dev/null
+++ b/relazioni/wireless/bare_jrnl.tex
@@ -0,0 +1,745 @@
+
+%% bare_jrnl.tex
+%% V1.3
+%% 2007/01/11
+%% by Michael Shell
+%% see http://www.michaelshell.org/
+%% for current contact information.
+%%
+%% This is a skeleton file demonstrating the use of IEEEtran.cls
+%% (requires IEEEtran.cls version 1.7 or later) with an IEEE journal paper.
+%%
+%% Support sites:
+%% http://www.michaelshell.org/tex/ieeetran/
+%% http://www.ctan.org/tex-archive/macros/latex/contrib/IEEEtran/
+%% and
+%% http://www.ieee.org/
+
+
+
+% *** Authors should verify (and, if needed, correct) their LaTeX system ***
+% *** with the testflow diagnostic prior to trusting their LaTeX platform ***
+% *** with production work. IEEE's font choices can trigger bugs that do ***
+% *** not appear when using other class files. ***
+% The testflow support page is at:
+% http://www.michaelshell.org/tex/testflow/
+
+
+%%*************************************************************************
+%% Legal Notice:
+%% This code is offered as-is without any warranty either expressed or
+%% implied; without even the implied warranty of MERCHANTABILITY or
+%% FITNESS FOR A PARTICULAR PURPOSE!
+%% User assumes all risk.
+%% In no event shall IEEE or any contributor to this code be liable for
+%% any damages or losses, including, but not limited to, incidental,
+%% consequential, or any other damages, resulting from the use or misuse
+%% of any information contained here.
+%%
+%% All comments are the opinions of their respective authors and are not
+%% necessarily endorsed by the IEEE.
+%%
+%% This work is distributed under the LaTeX Project Public License (LPPL)
+%% ( http://www.latex-project.org/ ) version 1.3, and may be freely used,
+%% distributed and modified. A copy of the LPPL, version 1.3, is included
+%% in the base LaTeX documentation of all distributions of LaTeX released
+%% 2003/12/01 or later.
+%% Retain all contribution notices and credits.
+%% ** Modified files should be clearly indicated as such, including **
+%% ** renaming them and changing author support contact information. **
+%%
+%% File list of work: IEEEtran.cls, IEEEtran_HOWTO.pdf, bare_adv.tex,
+%% bare_conf.tex, bare_jrnl.tex, bare_jrnl_compsoc.tex
+%%*************************************************************************
+
+% Note that the a4paper option is mainly intended so that authors in
+% countries using A4 can easily print to A4 and see how their papers will
+% look in print - the typesetting of the document will not typically be
+% affected with changes in paper size (but the bottom and side margins will).
+% Use the testflow package mentioned above to verify correct handling of
+% both paper sizes by the user's LaTeX system.
+%
+% Also note that the "draftcls" or "draftclsnofoot", not "draft", option
+% should be used if it is desired that the figures are to be displayed in
+% draft mode.
+%
+\documentclass[journal]{IEEEtran}
+%
+% If IEEEtran.cls has not been installed into the LaTeX system files,
+% manually specify the path to it like:
+% \documentclass[journal]{../sty/IEEEtran}
+
+
+
+
+
+% Some very useful LaTeX packages include:
+% (uncomment the ones you want to load)
+
+
+% *** MISC UTILITY PACKAGES ***
+%
+%\usepackage{ifpdf}
+% Heiko Oberdiek's ifpdf.sty is very useful if you need conditional
+% compilation based on whether the output is pdf or dvi.
+% usage:
+% \ifpdf
+% % pdf code
+% \else
+% % dvi code
+% \fi
+% The latest version of ifpdf.sty can be obtained from:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/oberdiek/
+% Also, note that IEEEtran.cls V1.7 and later provides a builtin
+% \ifCLASSINFOpdf conditional that works the same way.
+% When switching from latex to pdflatex and vice-versa, the compiler may
+% have to be run twice to clear warning/error messages.
+
+
+
+
+
+
+% *** CITATION PACKAGES ***
+%
+%\usepackage{cite}
+% cite.sty was written by Donald Arseneau
+% V1.6 and later of IEEEtran pre-defines the format of the cite.sty package
+% \cite{} output to follow that of IEEE. Loading the cite package will
+% result in citation numbers being automatically sorted and properly
+% "compressed/ranged". e.g., [1], [9], [2], [7], [5], [6] without using
+% cite.sty will become [1], [2], [5]--[7], [9] using cite.sty. cite.sty's
+% \cite will automatically add leading space, if needed. Use cite.sty's
+% noadjust option (cite.sty V3.8 and later) if you want to turn this off.
+% cite.sty is already installed on most LaTeX systems. Be sure and use
+% version 4.0 (2003-05-27) and later if using hyperref.sty. cite.sty does
+% not currently provide for hyperlinked citations.
+% The latest version can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/cite/
+% The documentation is contained in the cite.sty file itself.
+
+
+
+
+
+
+% *** GRAPHICS RELATED PACKAGES ***
+%
+\ifCLASSINFOpdf
+ % \usepackage[pdftex]{graphicx}
+ % declare the path(s) where your graphic files are
+ % \graphicspath{{../pdf/}{../jpeg/}}
+ % and their extensions so you won't have to specify these with
+ % every instance of \includegraphics
+ % \DeclareGraphicsExtensions{.pdf,.jpeg,.png}
+\else
+ % or other class option (dvipsone, dvipdf, if not using dvips). graphicx
+ % will default to the driver specified in the system graphics.cfg if no
+ % driver is specified.
+ % \usepackage[dvips]{graphicx}
+ % declare the path(s) where your graphic files are
+ % \graphicspath{{../eps/}}
+ % and their extensions so you won't have to specify these with
+ % every instance of \includegraphics
+ % \DeclareGraphicsExtensions{.eps}
+\fi
+% graphicx was written by David Carlisle and Sebastian Rahtz. It is
+% required if you want graphics, photos, etc. graphicx.sty is already
+% installed on most LaTeX systems. The latest version and documentation can
+% be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/required/graphics/
+% Another good source of documentation is "Using Imported Graphics in
+% LaTeX2e" by Keith Reckdahl which can be found as epslatex.ps or
+% epslatex.pdf at: http://www.ctan.org/tex-archive/info/
+%
+% latex, and pdflatex in dvi mode, support graphics in encapsulated
+% postscript (.eps) format. pdflatex in pdf mode supports graphics
+% in .pdf, .jpeg, .png and .mps (metapost) formats. Users should ensure
+% that all non-photo figures use a vector format (.eps, .pdf, .mps) and
+% not a bitmapped formats (.jpeg, .png). IEEE frowns on bitmapped formats
+% which can result in "jaggedy"/blurry rendering of lines and letters as
+% well as large increases in file sizes.
+%
+% You can find documentation about the pdfTeX application at:
+% http://www.tug.org/applications/pdftex
+
+
+
+
+
+% *** MATH PACKAGES ***
+%
+%\usepackage[cmex10]{amsmath}
+% A popular package from the American Mathematical Society that provides
+% many useful and powerful commands for dealing with mathematics. If using
+% it, be sure to load this package with the cmex10 option to ensure that
+% only type 1 fonts will utilized at all point sizes. Without this option,
+% it is possible that some math symbols, particularly those within
+% footnotes, will be rendered in bitmap form which will result in a
+% document that can not be IEEE Xplore compliant!
+%
+% Also, note that the amsmath package sets \interdisplaylinepenalty to 10000
+% thus preventing page breaks from occurring within multiline equations. Use:
+%\interdisplaylinepenalty=2500
+% after loading amsmath to restore such page breaks as IEEEtran.cls normally
+% does. amsmath.sty is already installed on most LaTeX systems. The latest
+% version and documentation can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/required/amslatex/math/
+
+
+
+
+
+% *** SPECIALIZED LIST PACKAGES ***
+%
+%\usepackage{algorithmic}
+% algorithmic.sty was written by Peter Williams and Rogerio Brito.
+% This package provides an algorithmic environment fo describing algorithms.
+% You can use the algorithmic environment in-text or within a figure
+% environment to provide for a floating algorithm. Do NOT use the algorithm
+% floating environment provided by algorithm.sty (by the same authors) or
+% algorithm2e.sty (by Christophe Fiorio) as IEEE does not use dedicated
+% algorithm float types and packages that provide these will not provide
+% correct IEEE style captions. The latest version and documentation of
+% algorithmic.sty can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/algorithms/
+% There is also a support site at:
+% http://algorithms.berlios.de/index.html
+% Also of interest may be the (relatively newer and more customizable)
+% algorithmicx.sty package by Szasz Janos:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/algorithmicx/
+
+
+
+
+% *** ALIGNMENT PACKAGES ***
+%
+%\usepackage{array}
+% Frank Mittelbach's and David Carlisle's array.sty patches and improves
+% the standard LaTeX2e array and tabular environments to provide better
+% appearance and additional user controls. As the default LaTeX2e table
+% generation code is lacking to the point of almost being broken with
+% respect to the quality of the end results, all users are strongly
+% advised to use an enhanced (at the very least that provided by array.sty)
+% set of table tools. array.sty is already installed on most systems. The
+% latest version and documentation can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/required/tools/
+
+
+%\usepackage{mdwmath}
+%\usepackage{mdwtab}
+% Also highly recommended is Mark Wooding's extremely powerful MDW tools,
+% especially mdwmath.sty and mdwtab.sty which are used to format equations
+% and tables, respectively. The MDWtools set is already installed on most
+% LaTeX systems. The lastest version and documentation is available at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/mdwtools/
+
+
+% IEEEtran contains the IEEEeqnarray family of commands that can be used to
+% generate multiline equations as well as matrices, tables, etc., of high
+% quality.
+
+
+%\usepackage{eqparbox}
+% Also of notable interest is Scott Pakin's eqparbox package for creating
+% (automatically sized) equal width boxes - aka "natural width parboxes".
+% Available at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/eqparbox/
+
+
+
+
+
+% *** SUBFIGURE PACKAGES ***
+%\usepackage[tight,footnotesize]{subfigure}
+% subfigure.sty was written by Steven Douglas Cochran. This package makes it
+% easy to put subfigures in your figures. e.g., "Figure 1a and 1b". For IEEE
+% work, it is a good idea to load it with the tight package option to reduce
+% the amount of white space around the subfigures. subfigure.sty is already
+% installed on most LaTeX systems. The latest version and documentation can
+% be obtained at:
+% http://www.ctan.org/tex-archive/obsolete/macros/latex/contrib/subfigure/
+% subfigure.sty has been superceeded by subfig.sty.
+
+
+
+%\usepackage[caption=false]{caption}
+%\usepackage[font=footnotesize]{subfig}
+% subfig.sty, also written by Steven Douglas Cochran, is the modern
+% replacement for subfigure.sty. However, subfig.sty requires and
+% automatically loads Axel Sommerfeldt's caption.sty which will override
+% IEEEtran.cls handling of captions and this will result in nonIEEE style
+% figure/table captions. To prevent this problem, be sure and preload
+% caption.sty with its "caption=false" package option. This is will preserve
+% IEEEtran.cls handing of captions. Version 1.3 (2005/06/28) and later
+% (recommended due to many improvements over 1.2) of subfig.sty supports
+% the caption=false option directly:
+%\usepackage[caption=false,font=footnotesize]{subfig}
+%
+% The latest version and documentation can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/subfig/
+% The latest version and documentation of caption.sty can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/caption/
+
+
+
+
+% *** FLOAT PACKAGES ***
+%
+%\usepackage{fixltx2e}
+% fixltx2e, the successor to the earlier fix2col.sty, was written by
+% Frank Mittelbach and David Carlisle. This package corrects a few problems
+% in the LaTeX2e kernel, the most notable of which is that in current
+% LaTeX2e releases, the ordering of single and double column floats is not
+% guaranteed to be preserved. Thus, an unpatched LaTeX2e can allow a
+% single column figure to be placed prior to an earlier double column
+% figure. The latest version and documentation can be found at:
+% http://www.ctan.org/tex-archive/macros/latex/base/
+
+
+
+%\usepackage{stfloats}
+% stfloats.sty was written by Sigitas Tolusis. This package gives LaTeX2e
+% the ability to do double column floats at the bottom of the page as well
+% as the top. (e.g., "\begin{figure*}[!b]" is not normally possible in
+% LaTeX2e). It also provides a command:
+%\fnbelowfloat
+% to enable the placement of footnotes below bottom floats (the standard
+% LaTeX2e kernel puts them above bottom floats). This is an invasive package
+% which rewrites many portions of the LaTeX2e float routines. It may not work
+% with other packages that modify the LaTeX2e float routines. The latest
+% version and documentation can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/sttools/
+% Documentation is contained in the stfloats.sty comments as well as in the
+% presfull.pdf file. Do not use the stfloats baselinefloat ability as IEEE
+% does not allow \baselineskip to stretch. Authors submitting work to the
+% IEEE should note that IEEE rarely uses double column equations and
+% that authors should try to avoid such use. Do not be tempted to use the
+% cuted.sty or midfloat.sty packages (also by Sigitas Tolusis) as IEEE does
+% not format its papers in such ways.
+
+
+%\ifCLASSOPTIONcaptionsoff
+% \usepackage[nomarkers]{endfloat}
+% \let\MYoriglatexcaption\caption
+% \renewcommand{\caption}[2][\relax]{\MYoriglatexcaption[#2]{#2}}
+%\fi
+% endfloat.sty was written by James Darrell McCauley and Jeff Goldberg.
+% This package may be useful when used in conjunction with IEEEtran.cls'
+% captionsoff option. Some IEEE journals/societies require that submissions
+% have lists of figures/tables at the end of the paper and that
+% figures/tables without any captions are placed on a page by themselves at
+% the end of the document. If needed, the draftcls IEEEtran class option or
+% \CLASSINPUTbaselinestretch interface can be used to increase the line
+% spacing as well. Be sure and use the nomarkers option of endfloat to
+% prevent endfloat from "marking" where the figures would have been placed
+% in the text. The two hack lines of code above are a slight modification of
+% that suggested by in the endfloat docs (section 8.3.1) to ensure that
+% the full captions always appear in the list of figures/tables - even if
+% the user used the short optional argument of \caption[]{}.
+% IEEE papers do not typically make use of \caption[]'s optional argument,
+% so this should not be an issue. A similar trick can be used to disable
+% captions of packages such as subfig.sty that lack options to turn off
+% the subcaptions:
+% For subfig.sty:
+% \let\MYorigsubfloat\subfloat
+% \renewcommand{\subfloat}[2][\relax]{\MYorigsubfloat[]{#2}}
+% For subfigure.sty:
+% \let\MYorigsubfigure\subfigure
+% \renewcommand{\subfigure}[2][\relax]{\MYorigsubfigure[]{#2}}
+% However, the above trick will not work if both optional arguments of
+% the \subfloat/subfig command are used. Furthermore, there needs to be a
+% description of each subfigure *somewhere* and endfloat does not add
+% subfigure captions to its list of figures. Thus, the best approach is to
+% avoid the use of subfigure captions (many IEEE journals avoid them anyway)
+% and instead reference/explain all the subfigures within the main caption.
+% The latest version of endfloat.sty and its documentation can obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/endfloat/
+%
+% The IEEEtran \ifCLASSOPTIONcaptionsoff conditional can also be used
+% later in the document, say, to conditionally put the References on a
+% page by themselves.
+
+
+
+
+
+% *** PDF, URL AND HYPERLINK PACKAGES ***
+%
+%\usepackage{url}
+% url.sty was written by Donald Arseneau. It provides better support for
+% handling and breaking URLs. url.sty is already installed on most LaTeX
+% systems. The latest version can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/misc/
+% Read the url.sty source comments for usage information. Basically,
+% \url{my_url_here}.
+
+
+
+
+
+% *** Do not adjust lengths that control margins, column widths, etc. ***
+% *** Do not use packages that alter fonts (such as pslatex). ***
+% There should be no need to do such things with IEEEtran.cls V1.6 and later.
+% (Unless specifically asked to do so by the journal or conference you plan
+% to submit to, of course. )
+
+
+% correct bad hyphenation here
+\hyphenation{op-tical net-works semi-conduc-tor}
+
+
+\begin{document}
+%
+% paper title
+% can use linebreaks \\ within to get better formatting as desired
+\title{Bare Demo of IEEEtran.cls for Journals}
+%
+%
+% author names and IEEE memberships
+% note positions of commas and nonbreaking spaces ( ~ ) LaTeX will not break
+% a structure at a ~ so this keeps an author's name from being broken across
+% two lines.
+% use \thanks{} to gain access to the first footnote area
+% a separate \thanks must be used for each paragraph as LaTeX2e's \thanks
+% was not built to handle multiple paragraphs
+%
+
+\author{Michael~Shell,~\IEEEmembership{Member,~IEEE,}
+ John~Doe,~\IEEEmembership{Fellow,~OSA,}
+ and~Jane~Doe,~\IEEEmembership{Life~Fellow,~IEEE}% <-this % stops a space
+\thanks{M. Shell is with the Department
+of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta,
+GA, 30332 USA e-mail: (see http://www.michaelshell.org/contact.html).}% <-this % stops a space
+\thanks{J. Doe and J. Doe are with Anonymous University.}% <-this % stops a space
+\thanks{Manuscript received April 19, 2005; revised January 11, 2007.}}
+
+% note the % following the last \IEEEmembership and also \thanks -
+% these prevent an unwanted space from occurring between the last author name
+% and the end of the author line. i.e., if you had this:
+%
+% \author{....lastname \thanks{...} \thanks{...} }
+% ^------------^------------^----Do not want these spaces!
+%
+% a space would be appended to the last name and could cause every name on that
+% line to be shifted left slightly. This is one of those "LaTeX things". For
+% instance, "\textbf{A} \textbf{B}" will typeset as "A B" not "AB". To get
+% "AB" then you have to do: "\textbf{A}\textbf{B}"
+% \thanks is no different in this regard, so shield the last } of each \thanks
+% that ends a line with a % and do not let a space in before the next \thanks.
+% Spaces after \IEEEmembership other than the last one are OK (and needed) as
+% you are supposed to have spaces between the names. For what it is worth,
+% this is a minor point as most people would not even notice if the said evil
+% space somehow managed to creep in.
+
+
+
+% The paper headers
+\markboth{Journal of \LaTeX\ Class Files,~Vol.~6, No.~1, January~2007}%
+{Shell \MakeLowercase{\textit{et al.}}: Bare Demo of IEEEtran.cls for Journals}
+% The only time the second header will appear is for the odd numbered pages
+% after the title page when using the twoside option.
+%
+% *** Note that you probably will NOT want to include the author's ***
+% *** name in the headers of peer review papers. ***
+% You can use \ifCLASSOPTIONpeerreview for conditional compilation here if
+% you desire.
+
+
+
+
+% If you want to put a publisher's ID mark on the page you can do it like
+% this:
+%\IEEEpubid{0000--0000/00\$00.00~\copyright~2007 IEEE}
+% Remember, if you use this you must call \IEEEpubidadjcol in the second
+% column for its text to clear the IEEEpubid mark.
+
+
+
+% use for special paper notices
+%\IEEEspecialpapernotice{(Invited Paper)}
+
+
+
+
+% make the title area
+\maketitle
+
+
+\begin{abstract}
+%\boldmath
+The abstract goes here.
+\end{abstract}
+% IEEEtran.cls defaults to using nonbold math in the Abstract.
+% This preserves the distinction between vectors and scalars. However,
+% if the journal you are submitting to favors bold math in the abstract,
+% then you can use LaTeX's standard command \boldmath at the very start
+% of the abstract to achieve this. Many IEEE journals frown on math
+% in the abstract anyway.
+
+% Note that keywords are not normally used for peerreview papers.
+\begin{IEEEkeywords}
+IEEEtran, journal, \LaTeX, paper, template.
+\end{IEEEkeywords}
+
+
+
+
+
+
+% For peer review papers, you can put extra information on the cover
+% page as needed:
+% \ifCLASSOPTIONpeerreview
+% \begin{center} \bfseries EDICS Category: 3-BBND \end{center}
+% \fi
+%
+% For peerreview papers, this IEEEtran command inserts a page break and
+% creates the second title. It will be ignored for other modes.
+\IEEEpeerreviewmaketitle
+
+
+
+\section{Introduction}
+% The very first letter is a 2 line initial drop letter followed
+% by the rest of the first word in caps.
+%
+% form to use if the first word consists of a single letter:
+% \IEEEPARstart{A}{demo} file is ....
+%
+% form to use if you need the single drop letter followed by
+% normal text (unknown if ever used by IEEE):
+% \IEEEPARstart{A}{}demo file is ....
+%
+% Some journals put the first two words in caps:
+% \IEEEPARstart{T}{his demo} file is ....
+%
+% Here we have the typical use of a "T" for an initial drop letter
+% and "HIS" in caps to complete the first word.
+\IEEEPARstart{T}{his} demo file is intended to serve as a ``starter file''
+for IEEE journal papers produced under \LaTeX\ using
+IEEEtran.cls version 1.7 and later.
+% You must have at least 2 lines in the paragraph with the drop letter
+% (should never be an issue)
+I wish you the best of success.
+
+\hfill mds
+
+\hfill January 11, 2007
+
+\subsection{Subsection Heading Here}
+Subsection text here.
+
+% needed in second column of first page if using \IEEEpubid
+%\IEEEpubidadjcol
+
+\subsubsection{Subsubsection Heading Here}
+Subsubsection text here.
+
+
+% An example of a floating figure using the graphicx package.
+% Note that \label must occur AFTER (or within) \caption.
+% For figures, \caption should occur after the \includegraphics.
+% Note that IEEEtran v1.7 and later has special internal code that
+% is designed to preserve the operation of \label within \caption
+% even when the captionsoff option is in effect. However, because
+% of issues like this, it may be the safest practice to put all your
+% \label just after \caption rather than within \caption{}.
+%
+% Reminder: the "draftcls" or "draftclsnofoot", not "draft", class
+% option should be used if it is desired that the figures are to be
+% displayed while in draft mode.
+%
+%\begin{figure}[!t]
+%\centering
+%\includegraphics[width=2.5in]{myfigure}
+% where an .eps filename suffix will be assumed under latex,
+% and a .pdf suffix will be assumed for pdflatex; or what has been declared
+% via \DeclareGraphicsExtensions.
+%\caption{Simulation Results}
+%\label{fig_sim}
+%\end{figure}
+
+% Note that IEEE typically puts floats only at the top, even when this
+% results in a large percentage of a column being occupied by floats.
+
+
+% An example of a double column floating figure using two subfigures.
+% (The subfig.sty package must be loaded for this to work.)
+% The subfigure \label commands are set within each subfloat command, the
+% \label for the overall figure must come after \caption.
+% \hfil must be used as a separator to get equal spacing.
+% The subfigure.sty package works much the same way, except \subfigure is
+% used instead of \subfloat.
+%
+%\begin{figure*}[!t]
+%\centerline{\subfloat[Case I]\includegraphics[width=2.5in]{subfigcase1}%
+%\label{fig_first_case}}
+%\hfil
+%\subfloat[Case II]{\includegraphics[width=2.5in]{subfigcase2}%
+%\label{fig_second_case}}}
+%\caption{Simulation results}
+%\label{fig_sim}
+%\end{figure*}
+%
+% Note that often IEEE papers with subfigures do not employ subfigure
+% captions (using the optional argument to \subfloat), but instead will
+% reference/describe all of them (a), (b), etc., within the main caption.
+
+
+% An example of a floating table. Note that, for IEEE style tables, the
+% \caption command should come BEFORE the table. Table text will default to
+% \footnotesize as IEEE normally uses this smaller font for tables.
+% The \label must come after \caption as always.
+%
+%\begin{table}[!t]
+%% increase table row spacing, adjust to taste
+%\renewcommand{\arraystretch}{1.3}
+% if using array.sty, it might be a good idea to tweak the value of
+% \extrarowheight as needed to properly center the text within the cells
+%\caption{An Example of a Table}
+%\label{table_example}
+%\centering
+%% Some packages, such as MDW tools, offer better commands for making tables
+%% than the plain LaTeX2e tabular which is used here.
+%\begin{tabular}{|c||c|}
+%\hline
+%One & Two\\
+%\hline
+%Three & Four\\
+%\hline
+%\end{tabular}
+%\end{table}
+
+
+% Note that IEEE does not put floats in the very first column - or typically
+% anywhere on the first page for that matter. Also, in-text middle ("here")
+% positioning is not used. Most IEEE journals use top floats exclusively.
+% Note that, LaTeX2e, unlike IEEE journals, places footnotes above bottom
+% floats. This can be corrected via the \fnbelowfloat command of the
+% stfloats package.
+
+
+
+\section{Conclusion}
+The conclusion goes here.
+
+
+
+
+
+% if have a single appendix:
+%\appendix[Proof of the Zonklar Equations]
+% or
+%\appendix % for no appendix heading
+% do not use \section anymore after \appendix, only \section*
+% is possibly needed
+
+% use appendices with more than one appendix
+% then use \section to start each appendix
+% you must declare a \section before using any
+% \subsection or using \label (\appendices by itself
+% starts a section numbered zero.)
+%
+
+
+\appendices
+\section{Proof of the First Zonklar Equation}
+Appendix one text goes here.
+
+% you can choose not to have a title for an appendix
+% if you want by leaving the argument blank
+\section{}
+Appendix two text goes here.
+
+
+% use section* for acknowledgement
+\section*{Acknowledgment}
+
+
+The authors would like to thank...
+
+
+% Can use something like this to put references on a page
+% by themselves when using endfloat and the captionsoff option.
+\ifCLASSOPTIONcaptionsoff
+ \newpage
+\fi
+
+
+
+% trigger a \newpage just before the given reference
+% number - used to balance the columns on the last page
+% adjust value as needed - may need to be readjusted if
+% the document is modified later
+%\IEEEtriggeratref{8}
+% The "triggered" command can be changed if desired:
+%\IEEEtriggercmd{\enlargethispage{-5in}}
+
+% references section
+
+% can use a bibliography generated by BibTeX as a .bbl file
+% BibTeX documentation can be easily obtained at:
+% http://www.ctan.org/tex-archive/biblio/bibtex/contrib/doc/
+% The IEEEtran BibTeX style support page is at:
+% http://www.michaelshell.org/tex/ieeetran/bibtex/
+%\bibliographystyle{IEEEtran}
+% argument is your BibTeX string definitions and bibliography database(s)
+%\bibliography{IEEEabrv,../bib/paper}
+%
+% <OR> manually copy in the resultant .bbl file
+% set second argument of \begin to the number of references
+% (used to reserve space for the reference number labels box)
+\begin{thebibliography}{1}
+
+\bibitem{IEEEhowto:kopka}
+H.~Kopka and P.~W. Daly, \emph{A Guide to \LaTeX}, 3rd~ed.\hskip 1em plus
+ 0.5em minus 0.4em\relax Harlow, England: Addison-Wesley, 1999.
+
+\end{thebibliography}
+
+% biography section
+%
+% If you have an EPS/PDF photo (graphicx package needed) extra braces are
+% needed around the contents of the optional argument to biography to prevent
+% the LaTeX parser from getting confused when it sees the complicated
+% \includegraphics command within an optional argument. (You could create
+% your own custom macro containing the \includegraphics command to make things
+% simpler here.)
+%\begin{biography}[{\includegraphics[width=1in,height=1.25in,clip,keepaspectratio]{mshell}}]{Michael Shell}
+% or if you just want to reserve a space for a photo:
+
+\begin{IEEEbiography}{Michael Shell}
+Biography text here.
+\end{IEEEbiography}
+
+% if you will not have a photo at all:
+\begin{IEEEbiographynophoto}{John Doe}
+Biography text here.
+\end{IEEEbiographynophoto}
+
+% insert where needed to balance the two columns on the last page with
+% biographies
+%\newpage
+
+\begin{IEEEbiographynophoto}{Jane Doe}
+Biography text here.
+\end{IEEEbiographynophoto}
+
+% You can push biographies down or up by placing
+% a \vfill before or after them. The appropriate
+% use of \vfill depends on what kind of text is
+% on the last page and whether or not the columns
+% are being equalized.
+
+%\vfill
+
+% Can be used to pull up biographies so that the bottom of the last one
+% is flush with the other column.
+%\enlargethispage{-5in}
+
+
+
+% that's all folks
+\end{document}
+
+
diff --git a/relazioni/wireless/bare_jrnl_compsoc.tex b/relazioni/wireless/bare_jrnl_compsoc.tex
new file mode 100644
index 0000000..8418862
--- /dev/null
+++ b/relazioni/wireless/bare_jrnl_compsoc.tex
@@ -0,0 +1,844 @@
+
+%% bare_jrnl_compsoc.tex
+%% V1.3
+%% 2007/01/11
+%% by Michael Shell
+%% See:
+%% http://www.michaelshell.org/
+%% for current contact information.
+%%
+%% This is a skeleton file demonstrating the use of IEEEtran.cls
+%% (requires IEEEtran.cls version 1.7 or later) with an IEEE Computer
+%% Society journal paper.
+%%
+%% Support sites:
+%% http://www.michaelshell.org/tex/ieeetran/
+%% http://www.ctan.org/tex-archive/macros/latex/contrib/IEEEtran/
+%% and
+%% http://www.ieee.org/
+
+%%*************************************************************************
+%% Legal Notice:
+%% This code is offered as-is without any warranty either expressed or
+%% implied; without even the implied warranty of MERCHANTABILITY or
+%% FITNESS FOR A PARTICULAR PURPOSE!
+%% User assumes all risk.
+%% In no event shall IEEE or any contributor to this code be liable for
+%% any damages or losses, including, but not limited to, incidental,
+%% consequential, or any other damages, resulting from the use or misuse
+%% of any information contained here.
+%%
+%% All comments are the opinions of their respective authors and are not
+%% necessarily endorsed by the IEEE.
+%%
+%% This work is distributed under the LaTeX Project Public License (LPPL)
+%% ( http://www.latex-project.org/ ) version 1.3, and may be freely used,
+%% distributed and modified. A copy of the LPPL, version 1.3, is included
+%% in the base LaTeX documentation of all distributions of LaTeX released
+%% 2003/12/01 or later.
+%% Retain all contribution notices and credits.
+%% ** Modified files should be clearly indicated as such, including **
+%% ** renaming them and changing author support contact information. **
+%%
+%% File list of work: IEEEtran.cls, IEEEtran_HOWTO.pdf, bare_adv.tex,
+%% bare_conf.tex, bare_jrnl.tex, bare_jrnl_compsoc.tex
+%%*************************************************************************
+
+% *** Authors should verify (and, if needed, correct) their LaTeX system ***
+% *** with the testflow diagnostic prior to trusting their LaTeX platform ***
+% *** with production work. IEEE's font choices can trigger bugs that do ***
+% *** not appear when using other class files. ***
+% The testflow support page is at:
+% http://www.michaelshell.org/tex/testflow/
+
+
+
+
+% Note that the a4paper option is mainly intended so that authors in
+% countries using A4 can easily print to A4 and see how their papers will
+% look in print - the typesetting of the document will not typically be
+% affected with changes in paper size (but the bottom and side margins will).
+% Use the testflow package mentioned above to verify correct handling of
+% both paper sizes by the user's LaTeX system.
+%
+% Also note that the "draftcls" or "draftclsnofoot", not "draft", option
+% should be used if it is desired that the figures are to be displayed in
+% draft mode.
+%
+% The Computer Society usually requires 12pt for submissions.
+%
+\documentclass[12pt,journal,compsoc]{IEEEtran}
+%
+% If IEEEtran.cls has not been installed into the LaTeX system files,
+% manually specify the path to it like:
+% \documentclass[12pt,journal,compsoc]{../sty/IEEEtran}
+
+
+
+
+
+% Some very useful LaTeX packages include:
+% (uncomment the ones you want to load)
+
+
+% *** MISC UTILITY PACKAGES ***
+%
+%\usepackage{ifpdf}
+% Heiko Oberdiek's ifpdf.sty is very useful if you need conditional
+% compilation based on whether the output is pdf or dvi.
+% usage:
+% \ifpdf
+% % pdf code
+% \else
+% % dvi code
+% \fi
+% The latest version of ifpdf.sty can be obtained from:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/oberdiek/
+% Also, note that IEEEtran.cls V1.7 and later provides a builtin
+% \ifCLASSINFOpdf conditional that works the same way.
+% When switching from latex to pdflatex and vice-versa, the compiler may
+% have to be run twice to clear warning/error messages.
+
+
+
+
+
+
+% *** CITATION PACKAGES ***
+%
+\ifCLASSOPTIONcompsoc
+ % IEEE Computer Society needs nocompress option
+ % requires cite.sty v4.0 or later (November 2003)
+ % \usepackage[nocompress]{cite}
+\else
+ % normal IEEE
+ % \usepackage{cite}
+\fi
+% cite.sty was written by Donald Arseneau
+% V1.6 and later of IEEEtran pre-defines the format of the cite.sty package
+% \cite{} output to follow that of IEEE. Loading the cite package will
+% result in citation numbers being automatically sorted and properly
+% "compressed/ranged". e.g., [1], [9], [2], [7], [5], [6] without using
+% cite.sty will become [1], [2], [5]--[7], [9] using cite.sty. cite.sty's
+% \cite will automatically add leading space, if needed. Use cite.sty's
+% noadjust option (cite.sty V3.8 and later) if you want to turn this off.
+% cite.sty is already installed on most LaTeX systems. Be sure and use
+% version 4.0 (2003-05-27) and later if using hyperref.sty. cite.sty does
+% not currently provide for hyperlinked citations.
+% The latest version can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/cite/
+% The documentation is contained in the cite.sty file itself.
+%
+% Note that some packages require special options to format as the Computer
+% Society requires. In particular, Computer Society papers do not use
+% compressed citation ranges as is done in typical IEEE papers
+% (e.g., [1]-[4]). Instead, they list every citation separately in order
+% (e.g., [1], [2], [3], [4]). To get the latter we need to load the cite
+% package with the nocompress option which is supported by cite.sty v4.0
+% and later. Note also the use of a CLASSOPTION conditional provided by
+% IEEEtran.cls V1.7 and later.
+
+
+
+
+
+% *** GRAPHICS RELATED PACKAGES ***
+%
+\ifCLASSINFOpdf
+ % \usepackage[pdftex]{graphicx}
+ % declare the path(s) where your graphic files are
+ % \graphicspath{{../pdf/}{../jpeg/}}
+ % and their extensions so you won't have to specify these with
+ % every instance of \includegraphics
+ % \DeclareGraphicsExtensions{.pdf,.jpeg,.png}
+\else
+ % or other class option (dvipsone, dvipdf, if not using dvips). graphicx
+ % will default to the driver specified in the system graphics.cfg if no
+ % driver is specified.
+ % \usepackage[dvips]{graphicx}
+ % declare the path(s) where your graphic files are
+ % \graphicspath{{../eps/}}
+ % and their extensions so you won't have to specify these with
+ % every instance of \includegraphics
+ % \DeclareGraphicsExtensions{.eps}
+\fi
+% graphicx was written by David Carlisle and Sebastian Rahtz. It is
+% required if you want graphics, photos, etc. graphicx.sty is already
+% installed on most LaTeX systems. The latest version and documentation can
+% be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/required/graphics/
+% Another good source of documentation is "Using Imported Graphics in
+% LaTeX2e" by Keith Reckdahl which can be found as epslatex.ps or
+% epslatex.pdf at: http://www.ctan.org/tex-archive/info/
+%
+% latex, and pdflatex in dvi mode, support graphics in encapsulated
+% postscript (.eps) format. pdflatex in pdf mode supports graphics
+% in .pdf, .jpeg, .png and .mps (metapost) formats. Users should ensure
+% that all non-photo figures use a vector format (.eps, .pdf, .mps) and
+% not a bitmapped formats (.jpeg, .png). IEEE frowns on bitmapped formats
+% which can result in "jaggedy"/blurry rendering of lines and letters as
+% well as large increases in file sizes.
+%
+% You can find documentation about the pdfTeX application at:
+% http://www.tug.org/applications/pdftex
+
+
+
+
+
+% *** MATH PACKAGES ***
+%
+%\usepackage[cmex10]{amsmath}
+% A popular package from the American Mathematical Society that provides
+% many useful and powerful commands for dealing with mathematics. If using
+% it, be sure to load this package with the cmex10 option to ensure that
+% only type 1 fonts will utilized at all point sizes. Without this option,
+% it is possible that some math symbols, particularly those within
+% footnotes, will be rendered in bitmap form which will result in a
+% document that can not be IEEE Xplore compliant!
+%
+% Also, note that the amsmath package sets \interdisplaylinepenalty to 10000
+% thus preventing page breaks from occurring within multiline equations. Use:
+%\interdisplaylinepenalty=2500
+% after loading amsmath to restore such page breaks as IEEEtran.cls normally
+% does. amsmath.sty is already installed on most LaTeX systems. The latest
+% version and documentation can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/required/amslatex/math/
+
+
+
+
+
+% *** SPECIALIZED LIST PACKAGES ***
+%
+%\usepackage{algorithmic}
+% algorithmic.sty was written by Peter Williams and Rogerio Brito.
+% This package provides an algorithmic environment fo describing algorithms.
+% You can use the algorithmic environment in-text or within a figure
+% environment to provide for a floating algorithm. Do NOT use the algorithm
+% floating environment provided by algorithm.sty (by the same authors) or
+% algorithm2e.sty (by Christophe Fiorio) as IEEE does not use dedicated
+% algorithm float types and packages that provide these will not provide
+% correct IEEE style captions. The latest version and documentation of
+% algorithmic.sty can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/algorithms/
+% There is also a support site at:
+% http://algorithms.berlios.de/index.html
+% Also of interest may be the (relatively newer and more customizable)
+% algorithmicx.sty package by Szasz Janos:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/algorithmicx/
+
+
+
+
+% *** ALIGNMENT PACKAGES ***
+%
+%\usepackage{array}
+% Frank Mittelbach's and David Carlisle's array.sty patches and improves
+% the standard LaTeX2e array and tabular environments to provide better
+% appearance and additional user controls. As the default LaTeX2e table
+% generation code is lacking to the point of almost being broken with
+% respect to the quality of the end results, all users are strongly
+% advised to use an enhanced (at the very least that provided by array.sty)
+% set of table tools. array.sty is already installed on most systems. The
+% latest version and documentation can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/required/tools/
+
+
+%\usepackage{mdwmath}
+%\usepackage{mdwtab}
+% Also highly recommended is Mark Wooding's extremely powerful MDW tools,
+% especially mdwmath.sty and mdwtab.sty which are used to format equations
+% and tables, respectively. The MDWtools set is already installed on most
+% LaTeX systems. The lastest version and documentation is available at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/mdwtools/
+
+
+% IEEEtran contains the IEEEeqnarray family of commands that can be used to
+% generate multiline equations as well as matrices, tables, etc., of high
+% quality.
+
+
+%\usepackage{eqparbox}
+% Also of notable interest is Scott Pakin's eqparbox package for creating
+% (automatically sized) equal width boxes - aka "natural width parboxes".
+% Available at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/eqparbox/
+
+
+
+
+
+% *** SUBFIGURE PACKAGES ***
+%\ifCLASSOPTIONcompsoc
+%\usepackage[tight,normalsize,sf,SF]{subfigure}
+%\else
+%\usepackage[tight,footnotesize]{subfigure}
+%\fi
+% subfigure.sty was written by Steven Douglas Cochran. This package makes it
+% easy to put subfigures in your figures. e.g., "Figure 1a and 1b". For IEEE
+% work, it is a good idea to load it with the tight package option to reduce
+% the amount of white space around the subfigures. Computer Society papers
+% use a larger font and \sffamily font for their captions, hence the
+% additional options needed under compsoc mode. subfigure.sty is already
+% installed on most LaTeX systems. The latest version and documentation can
+% be obtained at:
+% http://www.ctan.org/tex-archive/obsolete/macros/latex/contrib/subfigure/
+% subfigure.sty has been superceeded by subfig.sty.
+
+
+%\ifCLASSOPTIONcompsoc
+% \usepackage[caption=false]{caption}
+% \usepackage[font=normalsize,labelfont=sf,textfont=sf]{subfig}
+%\else
+% \usepackage[caption=false]{caption}
+% \usepackage[font=footnotesize]{subfig}
+%\fi
+% subfig.sty, also written by Steven Douglas Cochran, is the modern
+% replacement for subfigure.sty. However, subfig.sty requires and
+% automatically loads Axel Sommerfeldt's caption.sty which will override
+% IEEEtran.cls handling of captions and this will result in nonIEEE style
+% figure/table captions. To prevent this problem, be sure and preload
+% caption.sty with its "caption=false" package option. This is will preserve
+% IEEEtran.cls handing of captions. Version 1.3 (2005/06/28) and later
+% (recommended due to many improvements over 1.2) of subfig.sty supports
+% the caption=false option directly:
+%\ifCLASSOPTIONcompsoc
+% \usepackage[caption=false,font=normalsize,labelfont=sf,textfont=sf]{subfig}
+%\else
+% \usepackage[caption=false,font=footnotesize]{subfig}
+%\fi
+%
+% The latest version and documentation can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/subfig/
+% The latest version and documentation of caption.sty can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/caption/
+
+
+
+
+% *** FLOAT PACKAGES ***
+%
+%\usepackage{fixltx2e}
+% fixltx2e, the successor to the earlier fix2col.sty, was written by
+% Frank Mittelbach and David Carlisle. This package corrects a few problems
+% in the LaTeX2e kernel, the most notable of which is that in current
+% LaTeX2e releases, the ordering of single and double column floats is not
+% guaranteed to be preserved. Thus, an unpatched LaTeX2e can allow a
+% single column figure to be placed prior to an earlier double column
+% figure. The latest version and documentation can be found at:
+% http://www.ctan.org/tex-archive/macros/latex/base/
+
+
+
+%\usepackage{stfloats}
+% stfloats.sty was written by Sigitas Tolusis. This package gives LaTeX2e
+% the ability to do double column floats at the bottom of the page as well
+% as the top. (e.g., "\begin{figure*}[!b]" is not normally possible in
+% LaTeX2e). It also provides a command:
+%\fnbelowfloat
+% to enable the placement of footnotes below bottom floats (the standard
+% LaTeX2e kernel puts them above bottom floats). This is an invasive package
+% which rewrites many portions of the LaTeX2e float routines. It may not work
+% with other packages that modify the LaTeX2e float routines. The latest
+% version and documentation can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/sttools/
+% Documentation is contained in the stfloats.sty comments as well as in the
+% presfull.pdf file. Do not use the stfloats baselinefloat ability as IEEE
+% does not allow \baselineskip to stretch. Authors submitting work to the
+% IEEE should note that IEEE rarely uses double column equations and
+% that authors should try to avoid such use. Do not be tempted to use the
+% cuted.sty or midfloat.sty packages (also by Sigitas Tolusis) as IEEE does
+% not format its papers in such ways.
+
+
+
+
+%\ifCLASSOPTIONcaptionsoff
+% \usepackage[nomarkers]{endfloat}
+% \let\MYoriglatexcaption\caption
+% \renewcommand{\caption}[2][\relax]{\MYoriglatexcaption[#2]{#2}}
+%\fi
+% endfloat.sty was written by James Darrell McCauley and Jeff Goldberg.
+% This package may be useful when used in conjunction with IEEEtran.cls'
+% captionsoff option. Some IEEE journals/societies require that submissions
+% have lists of figures/tables at the end of the paper and that
+% figures/tables without any captions are placed on a page by themselves at
+% the end of the document. If needed, the draftcls IEEEtran class option or
+% \CLASSINPUTbaselinestretch interface can be used to increase the line
+% spacing as well. Be sure and use the nomarkers option of endfloat to
+% prevent endfloat from "marking" where the figures would have been placed
+% in the text. The two hack lines of code above are a slight modification of
+% that suggested by in the endfloat docs (section 8.3.1) to ensure that
+% the full captions always appear in the list of figures/tables - even if
+% the user used the short optional argument of \caption[]{}.
+% IEEE papers do not typically make use of \caption[]'s optional argument,
+% so this should not be an issue. A similar trick can be used to disable
+% captions of packages such as subfig.sty that lack options to turn off
+% the subcaptions:
+% For subfig.sty:
+% \let\MYorigsubfloat\subfloat
+% \renewcommand{\subfloat}[2][\relax]{\MYorigsubfloat[]{#2}}
+% For subfigure.sty:
+% \let\MYorigsubfigure\subfigure
+% \renewcommand{\subfigure}[2][\relax]{\MYorigsubfigure[]{#2}}
+% However, the above trick will not work if both optional arguments of
+% the \subfloat/subfig command are used. Furthermore, there needs to be a
+% description of each subfigure *somewhere* and endfloat does not add
+% subfigure captions to its list of figures. Thus, the best approach is to
+% avoid the use of subfigure captions (many IEEE journals avoid them anyway)
+% and instead reference/explain all the subfigures within the main caption.
+% The latest version of endfloat.sty and its documentation can obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/endfloat/
+%
+% The IEEEtran \ifCLASSOPTIONcaptionsoff conditional can also be used
+% later in the document, say, to conditionally put the References on a
+% page by themselves.
+
+
+
+
+% *** PDF, URL AND HYPERLINK PACKAGES ***
+%
+%\usepackage{url}
+% url.sty was written by Donald Arseneau. It provides better support for
+% handling and breaking URLs. url.sty is already installed on most LaTeX
+% systems. The latest version can be obtained at:
+% http://www.ctan.org/tex-archive/macros/latex/contrib/misc/
+% Read the url.sty source comments for usage information. Basically,
+% \url{my_url_here}.
+
+
+
+
+
+% *** Do not adjust lengths that control margins, column widths, etc. ***
+% *** Do not use packages that alter fonts (such as pslatex). ***
+% There should be no need to do such things with IEEEtran.cls V1.6 and later.
+% (Unless specifically asked to do so by the journal or conference you plan
+% to submit to, of course. )
+
+
+% correct bad hyphenation here
+\hyphenation{op-tical net-works semi-conduc-tor}
+
+
+\begin{document}
+%
+% paper title
+% can use linebreaks \\ within to get better formatting as desired
+\title{Bare Demo of IEEEtran.cls\\ for Computer Society Journals}
+%
+%
+% author names and IEEE memberships
+% note positions of commas and nonbreaking spaces ( ~ ) LaTeX will not break
+% a structure at a ~ so this keeps an author's name from being broken across
+% two lines.
+% use \thanks{} to gain access to the first footnote area
+% a separate \thanks must be used for each paragraph as LaTeX2e's \thanks
+% was not built to handle multiple paragraphs
+%
+%
+%\IEEEcompsocitemizethanks is a special \thanks that produces the bulleted
+% lists the Computer Society journals use for "first footnote" author
+% affiliations. Use \IEEEcompsocthanksitem which works much like \item
+% for each affiliation group. When not in compsoc mode,
+% \IEEEcompsocitemizethanks becomes like \thanks and
+% \IEEEcompsocthanksitem becomes a line break with idention. This
+% facilitates dual compilation, although admittedly the differences in the
+% desired content of \author between the different types of papers makes a
+% one-size-fits-all approach a daunting prospect. For instance, compsoc
+% journal papers have the author affiliations above the "Manuscript
+% received ..." text while in non-compsoc journals this is reversed. Sigh.
+
+\author{Michael~Shell,~\IEEEmembership{Member,~IEEE,}
+ John~Doe,~\IEEEmembership{Fellow,~OSA,}
+ and~Jane~Doe,~\IEEEmembership{Life~Fellow,~IEEE}% <-this % stops a space
+\IEEEcompsocitemizethanks{\IEEEcompsocthanksitem M. Shell is with the Department
+of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta,
+GA, 30332.\protect\\
+% note need leading \protect in front of \\ to get a newline within \thanks as
+% \\ is fragile and will error, could use \hfil\break instead.
+E-mail: see http://www.michaelshell.org/contact.html
+\IEEEcompsocthanksitem J. Doe and J. Doe are with Anonymous University.}% <-this % stops a space
+\thanks{Manuscript received April 19, 2005; revised January 11, 2007.}}
+
+% note the % following the last \IEEEmembership and also \thanks -
+% these prevent an unwanted space from occurring between the last author name
+% and the end of the author line. i.e., if you had this:
+%
+% \author{....lastname \thanks{...} \thanks{...} }
+% ^------------^------------^----Do not want these spaces!
+%
+% a space would be appended to the last name and could cause every name on that
+% line to be shifted left slightly. This is one of those "LaTeX things". For
+% instance, "\textbf{A} \textbf{B}" will typeset as "A B" not "AB". To get
+% "AB" then you have to do: "\textbf{A}\textbf{B}"
+% \thanks is no different in this regard, so shield the last } of each \thanks
+% that ends a line with a % and do not let a space in before the next \thanks.
+% Spaces after \IEEEmembership other than the last one are OK (and needed) as
+% you are supposed to have spaces between the names. For what it is worth,
+% this is a minor point as most people would not even notice if the said evil
+% space somehow managed to creep in.
+
+
+
+% The paper headers
+\markboth{Journal of \LaTeX\ Class Files,~Vol.~6, No.~1, January~2007}%
+{Shell \MakeLowercase{\textit{et al.}}: Bare Demo of IEEEtran.cls for Computer Society Journals}
+% The only time the second header will appear is for the odd numbered pages
+% after the title page when using the twoside option.
+%
+% *** Note that you probably will NOT want to include the author's ***
+% *** name in the headers of peer review papers. ***
+% You can use \ifCLASSOPTIONpeerreview for conditional compilation here if
+% you desire.
+
+
+
+% The publisher's ID mark at the bottom of the page is less important with
+% Computer Society journal papers as those publications place the marks
+% outside of the main text columns and, therefore, unlike regular IEEE
+% journals, the available text space is not reduced by their presence.
+% If you want to put a publisher's ID mark on the page you can do it like
+% this:
+%\IEEEpubid{0000--0000/00\$00.00~\copyright~2007 IEEE}
+% or like this to get the Computer Society new two part style.
+%\IEEEpubid{\makebox[\columnwidth]{\hfill 0000--0000/00/\$00.00~\copyright~2007 IEEE}%
+%\hspace{\columnsep}\makebox[\columnwidth]{Published by the IEEE Computer Society\hfill}}
+% Remember, if you use this you must call \IEEEpubidadjcol in the second
+% column for its text to clear the IEEEpubid mark (Computer Society jorunal
+% papers don't need this extra clearance.)
+
+
+
+% use for special paper notices
+%\IEEEspecialpapernotice{(Invited Paper)}
+
+
+
+% for Computer Society papers, we must declare the abstract and index terms
+% PRIOR to the title within the \IEEEcompsoctitleabstractindextext IEEEtran
+% command as these need to go into the title area created by \maketitle.
+\IEEEcompsoctitleabstractindextext{%
+\begin{abstract}
+%\boldmath
+The abstract goes here.
+\end{abstract}
+% IEEEtran.cls defaults to using nonbold math in the Abstract.
+% This preserves the distinction between vectors and scalars. However,
+% if the journal you are submitting to favors bold math in the abstract,
+% then you can use LaTeX's standard command \boldmath at the very start
+% of the abstract to achieve this. Many IEEE journals frown on math
+% in the abstract anyway. In particular, the Computer Society does
+% not want either math or citations to appear in the abstract.
+
+% Note that keywords are not normally used for peerreview papers.
+\begin{IEEEkeywords}
+Computer Society, IEEEtran, journal, \LaTeX, paper, template.
+\end{IEEEkeywords}}
+
+
+% make the title area
+\maketitle
+
+
+% To allow for easy dual compilation without having to reenter the
+% abstract/keywords data, the \IEEEcompsoctitleabstractindextext text will
+% not be used in maketitle, but will appear (i.e., to be "transported")
+% here as \IEEEdisplaynotcompsoctitleabstractindextext when compsoc mode
+% is not selected <OR> if conference mode is selected - because compsoc
+% conference papers position the abstract like regular (non-compsoc)
+% papers do!
+\IEEEdisplaynotcompsoctitleabstractindextext
+% \IEEEdisplaynotcompsoctitleabstractindextext has no effect when using
+% compsoc under a non-conference mode.
+
+
+% For peer review papers, you can put extra information on the cover
+% page as needed:
+% \ifCLASSOPTIONpeerreview
+% \begin{center} \bfseries EDICS Category: 3-BBND \end{center}
+% \fi
+%
+% For peerreview papers, this IEEEtran command inserts a page break and
+% creates the second title. It will be ignored for other modes.
+\IEEEpeerreviewmaketitle
+
+
+
+\section{Introduction}
+% Computer Society journal papers do something a tad strange with the very
+% first section heading (almost always called "Introduction"). They place it
+% ABOVE the main text! IEEEtran.cls currently does not do this for you.
+% However, You can achieve this effect by making LaTeX jump through some
+% hoops via something like:
+%
+%\ifCLASSOPTIONcompsoc
+% \noindent\raisebox{2\baselineskip}[0pt][0pt]%
+% {\parbox{\columnwidth}{\section{Introduction}\label{sec:introduction}%
+% \global\everypar=\everypar}}%
+% \vspace{-1\baselineskip}\vspace{-\parskip}\par
+%\else
+% \section{Introduction}\label{sec:introduction}\par
+%\fi
+%
+% Admittedly, this is a hack and may well be fragile, but seems to do the
+% trick for me. Note the need to keep any \label that may be used right
+% after \section in the above as the hack puts \section within a raised box.
+
+
+
+% The very first letter is a 2 line initial drop letter followed
+% by the rest of the first word in caps (small caps for compsoc).
+%
+% form to use if the first word consists of a single letter:
+% \IEEEPARstart{A}{demo} file is ....
+%
+% form to use if you need the single drop letter followed by
+% normal text (unknown if ever used by IEEE):
+% \IEEEPARstart{A}{}demo file is ....
+%
+% Some journals put the first two words in caps:
+% \IEEEPARstart{T}{his demo} file is ....
+%
+% Here we have the typical use of a "T" for an initial drop letter
+% and "HIS" in caps to complete the first word.
+\IEEEPARstart{T}{his} demo file is intended to serve as a ``starter file''
+for IEEE Computer Society journal papers produced under \LaTeX\ using
+IEEEtran.cls version 1.7 and later.
+% You must have at least 2 lines in the paragraph with the drop letter
+% (should never be an issue)
+I wish you the best of success.
+
+\hfill mds
+
+\hfill January 11, 2007
+
+\subsection{Subsection Heading Here}
+Subsection text here.
+
+% needed in second column of first page if using \IEEEpubid
+%\IEEEpubidadjcol
+
+\subsubsection{Subsubsection Heading Here}
+Subsubsection text here.
+
+
+% An example of a floating figure using the graphicx package.
+% Note that \label must occur AFTER (or within) \caption.
+% For figures, \caption should occur after the \includegraphics.
+% Note that IEEEtran v1.7 and later has special internal code that
+% is designed to preserve the operation of \label within \caption
+% even when the captionsoff option is in effect. However, because
+% of issues like this, it may be the safest practice to put all your
+% \label just after \caption rather than within \caption{}.
+%
+% Reminder: the "draftcls" or "draftclsnofoot", not "draft", class
+% option should be used if it is desired that the figures are to be
+% displayed while in draft mode.
+%
+%\begin{figure}[!t]
+%\centering
+%\includegraphics[width=2.5in]{myfigure}
+% where an .eps filename suffix will be assumed under latex,
+% and a .pdf suffix will be assumed for pdflatex; or what has been declared
+% via \DeclareGraphicsExtensions.
+%\caption{Simulation Results}
+%\label{fig_sim}
+%\end{figure}
+
+% Note that IEEE typically puts floats only at the top, even when this
+% results in a large percentage of a column being occupied by floats.
+% However, the Computer Society has been known to put floats at the bottom.
+
+
+% An example of a double column floating figure using two subfigures.
+% (The subfig.sty package must be loaded for this to work.)
+% The subfigure \label commands are set within each subfloat command, the
+% \label for the overall figure must come after \caption.
+% \hfil must be used as a separator to get equal spacing.
+% The subfigure.sty package works much the same way, except \subfigure is
+% used instead of \subfloat.
+%
+%\begin{figure*}[!t]
+%\centerline{\subfloat[Case I]\includegraphics[width=2.5in]{subfigcase1}%
+%\label{fig_first_case}}
+%\hfil
+%\subfloat[Case II]{\includegraphics[width=2.5in]{subfigcase2}%
+%\label{fig_second_case}}}
+%\caption{Simulation results}
+%\label{fig_sim}
+%\end{figure*}
+%
+% Note that often IEEE papers with subfigures do not employ subfigure
+% captions (using the optional argument to \subfloat), but instead will
+% reference/describe all of them (a), (b), etc., within the main caption.
+
+
+% An example of a floating table. Note that, for IEEE style tables, the
+% \caption command should come BEFORE the table. Table text will default to
+% \footnotesize as IEEE normally uses this smaller font for tables.
+% The \label must come after \caption as always.
+%
+%\begin{table}[!t]
+%% increase table row spacing, adjust to taste
+%\renewcommand{\arraystretch}{1.3}
+% if using array.sty, it might be a good idea to tweak the value of
+% \extrarowheight as needed to properly center the text within the cells
+%\caption{An Example of a Table}
+%\label{table_example}
+%\centering
+%% Some packages, such as MDW tools, offer better commands for making tables
+%% than the plain LaTeX2e tabular which is used here.
+%\begin{tabular}{|c||c|}
+%\hline
+%One & Two\\
+%\hline
+%Three & Four\\
+%\hline
+%\end{tabular}
+%\end{table}
+
+
+% Note that IEEE does not put floats in the very first column - or typically
+% anywhere on the first page for that matter. Also, in-text middle ("here")
+% positioning is not used. Most IEEE journals use top floats exclusively.
+% However, Computer Society journals sometimes do use bottom floats - bear
+% this in mind when choosing appropriate optional arguments for the
+% figure/table environments.
+% Note that, LaTeX2e, unlike IEEE journals, places footnotes above bottom
+% floats. This can be corrected via the \fnbelowfloat command of the
+% stfloats package.
+
+
+
+\section{Conclusion}
+The conclusion goes here.
+
+
+
+
+
+% if have a single appendix:
+%\appendix[Proof of the Zonklar Equations]
+% or
+%\appendix % for no appendix heading
+% do not use \section anymore after \appendix, only \section*
+% is possibly needed
+
+% use appendices with more than one appendix
+% then use \section to start each appendix
+% you must declare a \section before using any
+% \subsection or using \label (\appendices by itself
+% starts a section numbered zero.)
+%
+
+
+\appendices
+\section{Proof of the First Zonklar Equation}
+Appendix one text goes here.
+
+% you can choose not to have a title for an appendix
+% if you want by leaving the argument blank
+\section{}
+Appendix two text goes here.
+
+
+% use section* for acknowledgement
+\ifCLASSOPTIONcompsoc
+ % The Computer Society usually uses the plural form
+ \section*{Acknowledgments}
+\else
+ % regular IEEE prefers the singular form
+ \section*{Acknowledgment}
+\fi
+
+
+The authors would like to thank...
+
+
+% Can use something like this to put references on a page
+% by themselves when using endfloat and the captionsoff option.
+\ifCLASSOPTIONcaptionsoff
+ \newpage
+\fi
+
+
+
+% trigger a \newpage just before the given reference
+% number - used to balance the columns on the last page
+% adjust value as needed - may need to be readjusted if
+% the document is modified later
+%\IEEEtriggeratref{8}
+% The "triggered" command can be changed if desired:
+%\IEEEtriggercmd{\enlargethispage{-5in}}
+
+% references section
+
+% can use a bibliography generated by BibTeX as a .bbl file
+% BibTeX documentation can be easily obtained at:
+% http://www.ctan.org/tex-archive/biblio/bibtex/contrib/doc/
+% The IEEEtran BibTeX style support page is at:
+% http://www.michaelshell.org/tex/ieeetran/bibtex/
+%\bibliographystyle{IEEEtran}
+% argument is your BibTeX string definitions and bibliography database(s)
+%\bibliography{IEEEabrv,../bib/paper}
+%
+% <OR> manually copy in the resultant .bbl file
+% set second argument of \begin to the number of references
+% (used to reserve space for the reference number labels box)
+\begin{thebibliography}{1}
+
+\bibitem{IEEEhowto:kopka}
+H.~Kopka and P.~W. Daly, \emph{A Guide to \LaTeX}, 3rd~ed.\hskip 1em plus
+ 0.5em minus 0.4em\relax Harlow, England: Addison-Wesley, 1999.
+
+\end{thebibliography}
+
+% biography section
+%
+% If you have an EPS/PDF photo (graphicx package needed) extra braces are
+% needed around the contents of the optional argument to biography to prevent
+% the LaTeX parser from getting confused when it sees the complicated
+% \includegraphics command within an optional argument. (You could create
+% your own custom macro containing the \includegraphics command to make things
+% simpler here.)
+%\begin{biography}[{\includegraphics[width=1in,height=1.25in,clip,keepaspectratio]{mshell}}]{Michael Shell}
+% or if you just want to reserve a space for a photo:
+
+\begin{IEEEbiography}{Michael Shell}
+Biography text here.
+\end{IEEEbiography}
+
+% if you will not have a photo at all:
+\begin{IEEEbiographynophoto}{John Doe}
+Biography text here.
+\end{IEEEbiographynophoto}
+
+% insert where needed to balance the two columns on the last page with
+% biographies
+%\newpage
+
+\begin{IEEEbiographynophoto}{Jane Doe}
+Biography text here.
+\end{IEEEbiographynophoto}
+
+% You can push biographies down or up by placing
+% a \vfill before or after them. The appropriate
+% use of \vfill depends on what kind of text is
+% on the last page and whether or not the columns
+% are being equalized.
+
+%\vfill
+
+% Can be used to pull up biographies so that the bottom of the last one
+% is flush with the other column.
+%\enlargethispage{-5in}
+
+
+
+% that's all folks
+\end{document}
+
+
diff --git a/relazioni/wireless/paper.aux b/relazioni/wireless/paper.aux
new file mode 100644
index 0000000..e96a5ff
--- /dev/null
+++ b/relazioni/wireless/paper.aux
@@ -0,0 +1,68 @@
+\relax
+\@writefile{toc}{\contentsline {section}{\numberline {I}\textbf {Introduction}}{1}}
+\@writefile{toc}{\contentsline {section}{\numberline {II}\textbf {Intrusion detection}}{1}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {\unhbox \voidb@x \hbox {II-A}}Accelerometer}{1}}
+\@writefile{lof}{\contentsline {figure}{\numberline {1}{\ignorespaces Values and signs of detected acceleration}}{1}}
+\newlabel{eq:accel_variation}{{1}{1}}
+\@writefile{lof}{\contentsline {figure}{\numberline {2}{\ignorespaces OpenGL ES 3D animation to show phone orientation}}{2}}
+\newlabel{img:opengl}{{2}{2}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {\unhbox \voidb@x \hbox {II-B}}\textbf {Camera}}{2}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {\unhbox \voidb@x \hbox {II-C}}FASTA}{2}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {\unhbox \voidb@x \hbox {II-D}}BLAST}{2}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {\unhbox \voidb@x \hbox {II-E}}Burrows-Wheeler Transformation (BWT)}{3}}
+\newlabel{sec:Burrows-Wheeler Transformation (BWT)}{{\unhbox \voidb@x \hbox {II-E}}{3}}
+\@writefile{lot}{\contentsline {table}{\numberline {I}{\ignorespaces BWT eseguita sulla stringa gogol (\$ indica la fine della stringa)}}{3}}
+\@writefile{toc}{\contentsline {section}{\numberline {III}\textbf {Allineamento di reads corte}}{3}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {\unhbox \voidb@x \hbox {III-A}}MAQ}{3}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {\unhbox \voidb@x \hbox {III-B}}Bowtie}{4}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {\unhbox \voidb@x \hbox {III-C}}BWA}{4}}
+\@writefile{toc}{\contentsline {subsubsection}{\numberline {\unhbox \voidb@x \hbox {III-C}1}Prefix trie e string matching}{4}}
+\@writefile{toc}{\contentsline {subsubsection}{\numberline {\unhbox \voidb@x \hbox {III-C}2}BWT e suffix array}{4}}
+\@writefile{toc}{\contentsline {subsubsection}{\numberline {\unhbox \voidb@x \hbox {III-C}3}Intervalli nel suffix array}{4}}
+\@writefile{toc}{\contentsline {subsubsection}{\numberline {\unhbox \voidb@x \hbox {III-C}4}Matching esatto}{4}}
+\@writefile{toc}{\contentsline {subsubsection}{\numberline {\unhbox \voidb@x \hbox {III-C}5}Matching non esatto}{4}}
+\@writefile{lot}{\contentsline {table}{\numberline {II}{\ignorespaces Prestazioni di BWA per l'allineamento di un milione di coppie di \textit {reads} di 32, 70 e 125 basi simulate da un genoma umano con frequenza di SNP (\textit {Single Nucleotide Polimorphism}) pari a 0.09\%, una frequenza di \textit {indels} pari a 0.01\% una frequenza uniforme di errori di sequenziamento di 2\%. Sono mostrati i tempi di esecuzione (calcolati su un \textit {core} del processore 2.5 GHz Xeon E5420I), la stima percentuale di \textit {reads} allineate correttamente e la percentuale di errore in tale stima}}{5}}
+\newlabel{tab:BWA1}{{II}{5}}
+\@writefile{toc}{\contentsline {subsubsection}{\numberline {\unhbox \voidb@x \hbox {III-C}6}Valutazione delle prestazioni}{5}}
+\@writefile{lot}{\contentsline {table}{\numberline {III}{\ignorespaces Sono mostrati i tempi di esecuzione (calcolati su un \textit {core} del processore 2.5 GHz Xeon E5420I), la stima percentuale di \textit {reads} allineate correttamente e la stima percentuale con le \textit {mate-pairs} mappate nel corretto orientamento da BWA}}{5}}
+\newlabel{tab:BWA2}{{III}{5}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {\unhbox \voidb@x \hbox {III-D}}mrFAST e mrsFAST}{5}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {\unhbox \voidb@x \hbox {III-E}}BFAST}{5}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {\unhbox \voidb@x \hbox {III-F}}Novoalign}{6}}
+\@writefile{lot}{\contentsline {table}{\numberline {IV}{\ignorespaces Risultati nei tempi di allineamento e nel numero di \textit {reads} allineate correttamente di vari algoritmi su due \textit {datasets} reali differenti in relazione a tempi e percentuali di BFAST}}{6}}
+\newlabel{tab:BFASTperf4}{{IV}{6}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {\unhbox \voidb@x \hbox {III-G}}SHRiMP}{6}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {\unhbox \voidb@x \hbox {III-H}}ABMapper}{7}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {\unhbox \voidb@x \hbox {III-I}}rNA}{7}}
+\@writefile{toc}{\contentsline {subsubsection}{\numberline {\unhbox \voidb@x \hbox {III-I}1}Hashing e strategia di allineamento}{8}}
+\@writefile{toc}{\contentsline {subsubsection}{\numberline {\unhbox \voidb@x \hbox {III-I}2}Indels}{8}}
+\@writefile{toc}{\contentsline {subsubsection}{\numberline {\unhbox \voidb@x \hbox {III-I}3}\IeC {\ensuremath {\Delta }}-search}{8}}
+\@writefile{lot}{\contentsline {table}{\numberline {V}{\ignorespaces Tempi e percentuali di allineamenti corretti ottenuti da rNA di 166,622,914 reads prodotte dal sequenziatore Illumina}}{8}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {\unhbox \voidb@x \hbox {III-J}}SOAP}{8}}
+\@writefile{toc}{\contentsline {subsubsection}{\numberline {\unhbox \voidb@x \hbox {III-J}1}SOAPv3}{8}}
+\@writefile{lot}{\contentsline {table}{\numberline {VII}{\ignorespaces Tempi di esecuzione e percentuali di reads allineate di SOAPv3 e SOAPv2 su due \textit {paired-end datasets} con 70.7M e 25.3M coppie di \textit {reads}}}{9}}
+\newlabel{tab:SOAPv3vsSOAPv2}{{VII}{9}}
+\@writefile{toc}{\contentsline {section}{\numberline {IV}\textbf {Allineamento di reads lunghe}}{9}}
+\@writefile{toc}{\contentsline {subsection}{\numberline {\unhbox \voidb@x \hbox {IV-A}}BWA-SW}{9}}
+\@writefile{lot}{\contentsline {table}{\numberline {VI}{\ignorespaces Tempi di esecuzione e percentuali di \textit {reads} allineate di SOAPv3, BWA e Bowtie su due \textit {paired-end datasets} con 70.7M e 25.3M coppie di \textit {reads}. I tempi riportati includono il tempo di caricamente dell'indice in memoria, il tempo di lettura delle \textit {reads} ed il tempo di allineamento vero e proprio. Al fine di migliorarne le prestazioni BWA viene eseguito disabilitando l'allineamento con \textit {gap}}}{10}}
+\newlabel{tab:SOAPv3}{{VI}{10}}
+\bibcite{}{1}
+\bibcite{}{2}
+\bibcite{}{3}
+\bibcite{}{4}
+\bibcite{}{5}
+\bibcite{}{6}
+\bibcite{}{7}
+\bibcite{}{8}
+\bibcite{}{9}
+\bibcite{}{10}
+\bibcite{}{11}
+\bibcite{}{12}
+\bibcite{}{13}
+\bibcite{}{14}
+\bibcite{}{15}
+\bibcite{}{16}
+\bibcite{}{17}
+\@writefile{lot}{\contentsline {table}{\numberline {VIII}{\ignorespaces Circa 10,000,000 di basi raggruppate in \textit {reads} di diversa lunghezza sono simulate a partire dal genoma umano. Il 20\% degli errori sono \textit {indels} con lunghezza che evolve secondo una distribuzione geometrica. Queste \textit {reads} simulate sono allineate sul genoma umano con BLAT, BWA-SW e SSAHA2. Le coordinate di allineamento sono poi confrontate con le coordinate simulate per trovare gli errori di allineamento. I dati rappresentati sono il tempo su un \textit {core} di un processore Intel E5420 2.5 GHz CPU, la percentuale di \textit {reads} allineate con qualit\IeC {\`a} maggiore o uguale a 20 (Q20) e la percentuale di allineamenti errati in tale Q20}}{11}}
+\newlabel{tab:BWA-SW}{{VIII}{11}}
+\@writefile{toc}{\contentsline {section}{References}{11}}
diff --git a/relazioni/wireless/paper.log b/relazioni/wireless/paper.log
new file mode 100644
index 0000000..8990d86
--- /dev/null
+++ b/relazioni/wireless/paper.log
@@ -0,0 +1,1287 @@
+This is pdfTeX, Version 3.1415926-2.5-1.40.13 (TeX Live 2013/dev) (format=pdflatex 2012.10.18) 24 DEC 2012 11:39
+entering extended mode
+ restricted \write18 enabled.
+ %&-line parsing enabled.
+**paper.tex
+(./paper.tex
+LaTeX2e <2011/06/27>
+Babel <v3.8m> and hyphenation patterns for english, dumylang, nohyphenation, po
+lish, russian, ukrainian, basque, ibycus, irish, indonesian, catalan, slovak, p
+ortuguese, german, ngerman, swissgerman, welsh, dutch, friulan, slovenian, roma
+nian, danish, german-x-2012-05-30, ngerman-x-2012-05-30, hungarian, greek, espe
+ranto, bulgarian, romansh, latin, serbian, serbianc, italian, estonian, croatia
+n, coptic, czech, spanish, galician, afrikaans, mongolian, mongolianlmc, kurman
+ji, french, ukenglish, usenglishmax, icelandic, turkish, armenian, bokmal, nyno
+rsk, interlingua, swedish, finnish, uppersorbian, pinyin, loaded.
+(./IEEEtran.cls
+Document Class: IEEEtran 2007/03/05 V1.7a by Michael Shell
+-- See the "IEEEtran_HOWTO" manual for usage information.
+-- http://www.michaelshell.org/tex/ieeetran/
+\@IEEEtrantmpdimenA=\dimen102
+\@IEEEtrantmpdimenB=\dimen103
+\@IEEEtrantmpcountA=\count79
+\@IEEEtrantmpcountB=\count80
+\@IEEEtrantmptoksA=\toks14
+LaTeX Font Info: Try loading font information for OT1+ptm on input line 366.
+
+(/usr/share/texlive/texmf-dist/tex/latex/psnfss/ot1ptm.fd
+File: ot1ptm.fd 2001/06/04 font definitions for OT1/ptm.
+)
+-- Using 8.5in x 11in (letter) paper.
+-- Using PDF output.
+\@IEEEnormalsizeunitybaselineskip=\dimen104
+-- This is a 10 point document.
+\CLASSINFOnormalsizebaselineskip=\dimen105
+\CLASSINFOnormalsizeunitybaselineskip=\dimen106
+\IEEEnormaljot=\dimen107
+LaTeX Font Info: Font shape `OT1/ptm/bx/n' in size <5> not available
+(Font) Font shape `OT1/ptm/b/n' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/it' in size <5> not available
+(Font) Font shape `OT1/ptm/b/it' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/n' in size <7> not available
+(Font) Font shape `OT1/ptm/b/n' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/it' in size <7> not available
+(Font) Font shape `OT1/ptm/b/it' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/n' in size <8> not available
+(Font) Font shape `OT1/ptm/b/n' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/it' in size <8> not available
+(Font) Font shape `OT1/ptm/b/it' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/n' in size <9> not available
+(Font) Font shape `OT1/ptm/b/n' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/it' in size <9> not available
+(Font) Font shape `OT1/ptm/b/it' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/n' in size <10> not available
+(Font) Font shape `OT1/ptm/b/n' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/it' in size <10> not available
+(Font) Font shape `OT1/ptm/b/it' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/n' in size <11> not available
+(Font) Font shape `OT1/ptm/b/n' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/it' in size <11> not available
+(Font) Font shape `OT1/ptm/b/it' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/n' in size <12> not available
+(Font) Font shape `OT1/ptm/b/n' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/it' in size <12> not available
+(Font) Font shape `OT1/ptm/b/it' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/n' in size <17> not available
+(Font) Font shape `OT1/ptm/b/n' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/it' in size <17> not available
+(Font) Font shape `OT1/ptm/b/it' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/n' in size <20> not available
+(Font) Font shape `OT1/ptm/b/n' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/it' in size <20> not available
+(Font) Font shape `OT1/ptm/b/it' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/n' in size <24> not available
+(Font) Font shape `OT1/ptm/b/n' tried instead on input line 724.
+LaTeX Font Info: Font shape `OT1/ptm/bx/it' in size <24> not available
+(Font) Font shape `OT1/ptm/b/it' tried instead on input line 724.
+\IEEEilabelindentA=\dimen108
+\IEEEilabelindentB=\dimen109
+\IEEEilabelindent=\dimen110
+\IEEEelabelindent=\dimen111
+\IEEEdlabelindent=\dimen112
+\IEEElabelindent=\dimen113
+\IEEEiednormlabelsep=\dimen114
+\IEEEiedmathlabelsep=\dimen115
+\IEEEiedtopsep=\skip41
+\c@section=\count81
+\c@subsection=\count82
+\c@subsubsection=\count83
+\c@paragraph=\count84
+\c@IEEEsubequation=\count85
+\abovecaptionskip=\skip42
+\belowcaptionskip=\skip43
+\c@figure=\count86
+\c@table=\count87
+\@IEEEeqnnumcols=\count88
+\@IEEEeqncolcnt=\count89
+\@IEEEtmpitemindent=\dimen116
+\c@IEEEbiography=\count90
+\@IEEEtranrubishbin=\box26
+) (/usr/share/texlive/texmf-dist/tex/latex/graphics/graphicx.sty
+Package: graphicx 1999/02/16 v1.0f Enhanced LaTeX Graphics (DPC,SPQR)
+
+(/usr/share/texlive/texmf-dist/tex/latex/graphics/keyval.sty
+Package: keyval 1999/03/16 v1.13 key=value parser (DPC)
+\KV@toks@=\toks15
+)
+(/usr/share/texlive/texmf-dist/tex/latex/graphics/graphics.sty
+Package: graphics 2009/02/05 v1.0o Standard LaTeX Graphics (DPC,SPQR)
+
+(/usr/share/texlive/texmf-dist/tex/latex/graphics/trig.sty
+Package: trig 1999/03/16 v1.09 sin cos tan (DPC)
+)
+(/usr/share/texlive/texmf-dist/tex/latex/latexconfig/graphics.cfg
+File: graphics.cfg 2010/04/23 v1.9 graphics configuration of TeX Live
+)
+Package graphics Info: Driver file: pdftex.def on input line 91.
+
+(/usr/share/texlive/texmf-dist/tex/latex/pdftex-def/pdftex.def
+File: pdftex.def 2011/05/27 v0.06d Graphics/color for pdfTeX
+
+(/usr/share/texlive/texmf-dist/tex/generic/oberdiek/infwarerr.sty
+Package: infwarerr 2010/04/08 v1.3 Providing info/warning/error messages (HO)
+)
+(/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ltxcmds.sty
+Package: ltxcmds 2011/11/09 v1.22 LaTeX kernel commands for general use (HO)
+)
+\Gread@gobject=\count91
+))
+\Gin@req@height=\dimen117
+\Gin@req@width=\dimen118
+)
+(/usr/share/texlive/texmf-dist/tex/latex/base/inputenc.sty
+Package: inputenc 2008/03/30 v1.1d Input encoding file
+\inpenc@prehook=\toks16
+\inpenc@posthook=\toks17
+
+(/usr/share/texlive/texmf-dist/tex/latex/ucs/utf8x.def
+File: utf8x.def 2004/10/17 UCS: Input encoding UTF-8
+))
+(/usr/share/texlive/texmf-dist/tex/latex/ucs/ucs.sty
+Package: ucs 2004/10/17 UCS: Unicode input support
+
+(/usr/share/texlive/texmf-dist/tex/latex/ucs/data/uni-global.def
+File: uni-global.def 2012/04/20 UCS: Unicode global data
+)
+\uc@secondtry=\count92
+\uc@combtoks=\toks18
+\uc@combtoksb=\toks19
+\uc@temptokena=\toks20
+)
+(/usr/share/texlive/texmf-dist/tex/latex/tools/longtable.sty
+Package: longtable 2004/02/01 v4.11 Multi-page Table package (DPC)
+\LTleft=\skip44
+\LTright=\skip45
+\LTpre=\skip46
+\LTpost=\skip47
+\LTchunksize=\count93
+\LTcapwidth=\dimen119
+\LT@head=\box27
+\LT@firsthead=\box28
+\LT@foot=\box29
+\LT@lastfoot=\box30
+\LT@cols=\count94
+\LT@rows=\count95
+\c@LT@tables=\count96
+\c@LT@chunks=\count97
+\LT@p@ftn=\toks21
+)
+(/usr/share/texlive/texmf-dist/tex/latex/base/fontenc.sty
+Package: fontenc 2005/09/27 v1.99g Standard LaTeX package
+
+(/usr/share/texlive/texmf-dist/tex/latex/base/t1enc.def
+File: t1enc.def 2005/09/27 v1.99g Standard LaTeX file
+LaTeX Font Info: Redeclaring font encoding T1 on input line 43.
+)
+LaTeX Font Info: Try loading font information for T1+ptm on input line 100.
+
+(/usr/share/texlive/texmf-dist/tex/latex/psnfss/t1ptm.fd
+File: t1ptm.fd 2001/06/04 font definitions for T1/ptm.
+))
+(/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsmath.sty
+Package: amsmath 2000/07/18 v2.13 AMS math features
+\@mathmargin=\skip48
+
+For additional information on amsmath, use the `?' option.
+(/usr/share/texlive/texmf-dist/tex/latex/amsmath/amstext.sty
+Package: amstext 2000/06/29 v2.01
+
+(/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsgen.sty
+File: amsgen.sty 1999/11/30 v2.0
+\@emptytoks=\toks22
+\ex@=\dimen120
+))
+(/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsbsy.sty
+Package: amsbsy 1999/11/29 v1.2d
+\pmbraise@=\dimen121
+)
+(/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsopn.sty
+Package: amsopn 1999/12/14 v2.01 operator names
+)
+\inf@bad=\count98
+LaTeX Info: Redefining \frac on input line 211.
+\uproot@=\count99
+\leftroot@=\count100
+LaTeX Info: Redefining \overline on input line 307.
+\classnum@=\count101
+\DOTSCASE@=\count102
+LaTeX Info: Redefining \ldots on input line 379.
+LaTeX Info: Redefining \dots on input line 382.
+LaTeX Info: Redefining \cdots on input line 467.
+\Mathstrutbox@=\box31
+\strutbox@=\box32
+\big@size=\dimen122
+LaTeX Font Info: Redeclaring font encoding OML on input line 567.
+LaTeX Font Info: Redeclaring font encoding OMS on input line 568.
+\macc@depth=\count103
+\c@MaxMatrixCols=\count104
+\dotsspace@=\muskip10
+\c@parentequation=\count105
+\dspbrk@lvl=\count106
+\tag@help=\toks23
+\row@=\count107
+\column@=\count108
+\maxfields@=\count109
+\andhelp@=\toks24
+\eqnshift@=\dimen123
+\alignsep@=\dimen124
+\tagshift@=\dimen125
+\tagwidth@=\dimen126
+\totwidth@=\dimen127
+\lineht@=\dimen128
+\@envbody=\toks25
+\multlinegap=\skip49
+\multlinetaggap=\skip50
+\mathdisplay@stack=\toks26
+LaTeX Info: Redefining \[ on input line 2666.
+LaTeX Info: Redefining \] on input line 2667.
+) (./paper.aux
+
+LaTeX Warning: Label `' multiply defined.
+
+
+LaTeX Warning: Label `' multiply defined.
+
+
+LaTeX Warning: Label `' multiply defined.
+
+
+LaTeX Warning: Label `' multiply defined.
+
+
+LaTeX Warning: Label `' multiply defined.
+
+
+LaTeX Warning: Label `' multiply defined.
+
+
+LaTeX Warning: Label `' multiply defined.
+
+
+LaTeX Warning: Label `' multiply defined.
+
+
+LaTeX Warning: Label `' multiply defined.
+
+
+LaTeX Warning: Label `' multiply defined.
+
+
+LaTeX Warning: Label `' multiply defined.
+
+
+LaTeX Warning: Label `' multiply defined.
+
+
+LaTeX Warning: Label `' multiply defined.
+
+
+LaTeX Warning: Label `' multiply defined.
+
+
+LaTeX Warning: Label `' multiply defined.
+
+
+LaTeX Warning: Label `' multiply defined.
+
+)
+\openout1 = `paper.aux'.
+
+LaTeX Font Info: Checking defaults for OML/cmm/m/it on input line 14.
+LaTeX Font Info: ... okay on input line 14.
+LaTeX Font Info: Checking defaults for T1/cmr/m/n on input line 14.
+LaTeX Font Info: ... okay on input line 14.
+LaTeX Font Info: Checking defaults for OT1/cmr/m/n on input line 14.
+LaTeX Font Info: ... okay on input line 14.
+LaTeX Font Info: Checking defaults for OMS/cmsy/m/n on input line 14.
+LaTeX Font Info: ... okay on input line 14.
+LaTeX Font Info: Checking defaults for OMX/cmex/m/n on input line 14.
+LaTeX Font Info: ... okay on input line 14.
+LaTeX Font Info: Checking defaults for U/cmr/m/n on input line 14.
+LaTeX Font Info: ... okay on input line 14.
+LaTeX Font Info: Font shape `T1/ptm/bx/n' in size <5> not available
+(Font) Font shape `T1/ptm/b/n' tried instead on input line 14.
+LaTeX Font Info: Font shape `T1/ptm/bx/it' in size <5> not available
+(Font) Font shape `T1/ptm/b/it' tried instead on input line 14.
+LaTeX Font Info: Font shape `T1/ptm/bx/n' in size <7> not available
+(Font) Font shape `T1/ptm/b/n' tried instead on input line 14.
+LaTeX Font Info: Font shape `T1/ptm/bx/it' in size <7> not available
+(Font) Font shape `T1/ptm/b/it' tried instead on input line 14.
+LaTeX Font Info: Font shape `T1/ptm/bx/n' in size <8> not available
+(Font) Font shape `T1/ptm/b/n' tried instead on input line 14.
+LaTeX Font Info: Font shape `T1/ptm/bx/it' in size <8> not available
+(Font) Font shape `T1/ptm/b/it' tried instead on input line 14.
+LaTeX Font Info: Font shape `T1/ptm/bx/n' in size <9> not available
+(Font) Font shape `T1/ptm/b/n' tried instead on input line 14.
+LaTeX Font Info: Font shape `T1/ptm/bx/it' in size <9> not available
+(Font) Font shape `T1/ptm/b/it' tried instead on input line 14.
+LaTeX Font Info: Font shape `T1/ptm/bx/n' in size <10> not available
+(Font) Font shape `T1/ptm/b/n' tried instead on input line 14.
+LaTeX Font Info: Font shape `T1/ptm/bx/it' in size <10> not available
+(Font) Font shape `T1/ptm/b/it' tried instead on input line 14.
+LaTeX Font Info: Font shape `T1/ptm/bx/n' in size <11> not available
+(Font) Font shape `T1/ptm/b/n' tried instead on input line 14.
+LaTeX Font Info: Font shape `T1/ptm/bx/it' in size <11> not available
+(Font) Font shape `T1/ptm/b/it' tried instead on input line 14.
+LaTeX Font Info: Font shape `T1/ptm/bx/n' in size <12> not available
+(Font) Font shape `T1/ptm/b/n' tried instead on input line 14.
+LaTeX Font Info: Font shape `T1/ptm/bx/it' in size <12> not available
+(Font) Font shape `T1/ptm/b/it' tried instead on input line 14.
+LaTeX Font Info: Font shape `T1/ptm/bx/n' in size <17> not available
+(Font) Font shape `T1/ptm/b/n' tried instead on input line 14.
+LaTeX Font Info: Font shape `T1/ptm/bx/it' in size <17> not available
+(Font) Font shape `T1/ptm/b/it' tried instead on input line 14.
+LaTeX Font Info: Font shape `T1/ptm/bx/n' in size <20> not available
+(Font) Font shape `T1/ptm/b/n' tried instead on input line 14.
+LaTeX Font Info: Font shape `T1/ptm/bx/it' in size <20> not available
+(Font) Font shape `T1/ptm/b/it' tried instead on input line 14.
+LaTeX Font Info: Font shape `T1/ptm/bx/n' in size <24> not available
+(Font) Font shape `T1/ptm/b/n' tried instead on input line 14.
+LaTeX Font Info: Font shape `T1/ptm/bx/it' in size <24> not available
+(Font) Font shape `T1/ptm/b/it' tried instead on input line 14.
+ (/usr/share/texlive/texmf-dist/tex/context/base/supp-pdf.mkii
+[Loading MPS to PDF converter (version 2006.09.02).]
+\scratchcounter=\count110
+\scratchdimen=\dimen129
+\scratchbox=\box33
+\nofMPsegments=\count111
+\nofMParguments=\count112
+\everyMPshowfont=\toks27
+\MPscratchCnt=\count113
+\MPscratchDim=\dimen130
+\MPnumerator=\count114
+\makeMPintoPDFobject=\count115
+\everyMPtoPDFconversion=\toks28
+) (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/pdftexcmds.sty
+Package: pdftexcmds 2011/11/29 v0.20 Utility functions of pdfTeX for LuaTeX (HO
+)
+
+(/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifluatex.sty
+Package: ifluatex 2010/03/01 v1.3 Provides the ifluatex switch (HO)
+Package ifluatex Info: LuaTeX not detected.
+)
+(/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifpdf.sty
+Package: ifpdf 2011/01/30 v2.3 Provides the ifpdf switch (HO)
+Package ifpdf Info: pdfTeX in PDF mode is detected.
+)
+Package pdftexcmds Info: LuaTeX not detected.
+Package pdftexcmds Info: \pdf@primitive is available.
+Package pdftexcmds Info: \pdf@ifprimitive is available.
+Package pdftexcmds Info: \pdfdraftmode found.
+)
+(/usr/share/texlive/texmf-dist/tex/latex/oberdiek/epstopdf-base.sty
+Package: epstopdf-base 2010/02/09 v2.5 Base part for package epstopdf
+
+(/usr/share/texlive/texmf-dist/tex/latex/oberdiek/grfext.sty
+Package: grfext 2010/08/19 v1.1 Manage graphics extensions (HO)
+
+(/usr/share/texlive/texmf-dist/tex/generic/oberdiek/kvdefinekeys.sty
+Package: kvdefinekeys 2011/04/07 v1.3 Define keys (HO)
+))
+(/usr/share/texlive/texmf-dist/tex/latex/oberdiek/kvoptions.sty
+Package: kvoptions 2011/06/30 v3.11 Key value format for package options (HO)
+
+(/usr/share/texlive/texmf-dist/tex/generic/oberdiek/kvsetkeys.sty
+Package: kvsetkeys 2012/04/25 v1.16 Key value parser (HO)
+
+(/usr/share/texlive/texmf-dist/tex/generic/oberdiek/etexcmds.sty
+Package: etexcmds 2011/02/16 v1.5 Avoid name clashes with e-TeX commands (HO)
+Package etexcmds Info: Could not find \expanded.
+(etexcmds) That can mean that you are not using pdfTeX 1.50 or
+(etexcmds) that some package has redefined \expanded.
+(etexcmds) In the latter case, load this package earlier.
+)))
+Package grfext Info: Graphics extension search list:
+(grfext) [.png,.pdf,.jpg,.mps,.jpeg,.jbig2,.jb2,.PNG,.PDF,.JPG,.JPE
+G,.JBIG2,.JB2,.eps]
+(grfext) \AppendGraphicsExtensions on input line 452.
+
+(/usr/share/texlive/texmf-dist/tex/latex/latexconfig/epstopdf-sys.cfg
+File: epstopdf-sys.cfg 2010/07/13 v1.3 Configuration of (r)epstopdf for TeX Liv
+e
+))
+(/usr/share/texlive/texmf-dist/tex/latex/ucs/ucsencs.def
+File: ucsencs.def 2011/01/21 Fixes to fontencodings LGR, T3
+)
+(/usr/share/texlive/texmf-dist/tex/latex/ucs/data/uni-0.def
+File: uni-0.def 2012/04/20 UCS: Unicode data U+0000..U+00FF
+)
+LaTeX Font Info: Font shape `T1/ptm/bx/sc' in size <10> not available
+(Font) Font shape `T1/ptm/b/sc' tried instead on input line 37.
+
+Underfull \hbox (badness 10000) in paragraph at lines 50--51
+
+ []
+
+<resources/accelerometer.png, id=1, 315.42844pt x 347.04657pt>
+File: resources/accelerometer.png Graphic file (type png)
+
+<use resources/accelerometer.png>
+Package pdftex.def Info: resources/accelerometer.png used on input line 66.
+(pdftex.def) Requested size: 189.25851pt x 208.22954pt.
+
+<resources/opengl.png, id=2, 511.9125pt x 833.1125pt>
+File: resources/opengl.png Graphic file (type png)
+
+<use resources/opengl.png>
+Package pdftex.def Info: resources/opengl.png used on input line 76.
+(pdftex.def) Requested size: 153.57494pt x 249.93568pt.
+
+Underfull \hbox (badness 10000) in paragraph at lines 83--84
+
+ []
+
+LaTeX Font Info: Try loading font information for T1+pcr on input line 92.
+(/usr/share/texlive/texmf-dist/tex/latex/psnfss/t1pcr.fd
+File: t1pcr.fd 2001/06/04 font definitions for T1/pcr.
+) [1{/usr/share/texlive/texmf/fonts/map/pdftex/updmap/pdftex.map}
+
+
+ <./resources/accelerometer.png>]
+Underfull \hbox (badness 10000) in paragraph at lines 114--115
+
+ []
+
+
+Underfull \hbox (badness 1688) in paragraph at lines 117--123
+\T1/ptm/m/n/10 lunghezza della \T1/ptm/m/it/10 query\T1/ptm/m/n/10 ). Suc-ces-s
+i-va-mente scorre cias-cuna
+ []
+
+
+Underfull \hbox (badness 1694) in paragraph at lines 117--123
+\T1/ptm/m/n/10 com-pare nell'indice l'algoritmo mem-o-rizza la di-ag-o-nale.
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 117--123
+
+ []
+
+
+Underfull \hbox (badness 4353) in paragraph at lines 127--131
+[]\T1/ptm/m/n/10 BLAST (Alt-shul et al., 1990) rap-p-re-senta ad oggi
+ []
+
+
+Underfull \hbox (badness 2608) in paragraph at lines 127--131
+\T1/ptm/m/n/10 es-tendibili detti HSP (\T1/ptm/m/it/10 High-Scoring Seg-ment Pa
+ir\T1/ptm/m/n/10 ). Un
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 127--131
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 133--134
+
+ []
+
+[2 <./resources/opengl.png>]
+Underfull \hbox (badness 1960) in paragraph at lines 171--173
+\T1/ptm/m/n/10 il nu-mero di \T1/ptm/m/it/10 reads \T1/ptm/m/n/10 prodotte � au
+-men-tato notevol-mente
+ []
+
+
+Underfull \hbox (badness 6641) in paragraph at lines 171--173
+\T1/ptm/m/n/10 e con-sis-ten-te-mente an-che la quan-tit� di genoma da
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 171--173
+\T1/ptm/m/n/10 allineare. Oc-cor-re-vano metodi sem-pre pi� ot-timiz-zati
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 171--173
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 174--176
+\T1/ptm/m/n/10 La trasfor-mazione viene ba-nal-mente fatta or-di-nando
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 180--181
+
+ []
+
+
+Underfull \hbox (badness 1924) in paragraph at lines 182--183
+\T1/ptm/m/n/10 allinea-mento, mis-urante la prob-a-bibil-it� dell'allineamento
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 182--183
+
+ []
+
+[3]
+
+LaTeX Warning: Reference `img:MAQ1' on page 4 undefined on input line 200.
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 202--203
+[]\T1/ptm/b/n/10 Identificazione con-sen-sus\T1/ptm/m/n/10 : for-niti dei dati
+\T1/pcr/m/n/10 D
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 202--203
+\T1/ptm/m/n/10 di allinea-mento su una po-sizione si cal-cola
+ []
+
+
+Underfull \hbox (badness 4556) in paragraph at lines 202--203
+\OML/cmm/m/it/10 P\OT1/cmr/m/n/10 (\OML/cmm/m/it/10 D\OMS/cmsy/m/n/10 j \OML/cm
+m/m/it/10 < b\OT1/cmr/m/n/10 1\OML/cmm/m/it/10 ; b\OT1/cmr/m/n/10 1 \OML/cmm/m/
+it/10 >\OT1/cmr/m/n/10 )$\T1/ptm/m/n/10 , $\OML/cmm/m/it/10 P\OT1/cmr/m/n/10 (\
+OML/cmm/m/it/10 D\OMS/cmsy/m/n/10 j \OML/cmm/m/it/10 < b\OT1/cmr/m/n/10 2\OML/c
+mm/m/it/10 ; b\OT1/cmr/m/n/10 2 \OML/cmm/m/it/10 >\OT1/cmr/m/n/10 )$ \T1/ptm/m/
+n/10 e
+ []
+
+
+Underfull \hbox (badness 2717) in paragraph at lines 202--203
+\T1/ptm/m/n/10 di cal-co-lare la prob-a-bil-it� di cias-cun genotipo. Il
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 202--203
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 205--206
+
+ []
+
+
+LaTeX Warning: Reference `img:MAQ2' on page 4 undefined on input line 207.
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 210--211
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 215--216
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 218--219
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 221--222
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 223--224
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 226--227
+
+ []
+
+(/usr/share/texlive/texmf-dist/tex/latex/ucs/data/uni-34.def
+File: uni-34.def 2012/04/20 UCS: Unicode data U+2200..U+22FF
+)
+Underfull \hbox (badness 10000) in paragraph at lines 238--239
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 241--242
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 244--246
+
+ []
+
+[4]
+Overfull \hbox (21.32649pt too wide) in paragraph at lines 249--282
+ []
+ []
+
+
+Underfull \hbox (badness 2460) in paragraph at lines 289--292
+\T1/ptm/m/n/10 Per quello che riguarda la memo-ria SOAPv2 usa
+ []
+
+
+Underfull \hbox (badness 2635) in paragraph at lines 289--292
+\T1/ptm/m/n/10 l'allineamento \T1/ptm/m/it/10 single-end \T1/ptm/m/n/10 men-tre
+ circa 3GB per il
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 289--292
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 318--319
+
+ []
+
+
+Underfull \hbox (badness 2042) in paragraph at lines 327--328
+[]\T1/ptm/m/n/10 Identifica le CAL (\T1/ptm/m/it/10 Can-di-date Align-ment Lo-c
+a-tions\T1/ptm/m/n/10 )
+ []
+
+
+Underfull \hbox (badness 2547) in paragraph at lines 327--328
+\T1/ptm/m/n/10 allineate lo-cal-mente us-ando \T1/ptm/m/it/10 gap \T1/ptm/m/n/1
+0 per iden-ti-fi-care il
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 327--328
+
+ []
+
+
+Underfull \hbox (badness 5908) in paragraph at lines 330--335
+[]\T1/ptm/m/n/10 BFAST uti-lizza un in-dice mul-ti-plo pre-stando bene
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 330--335
+
+ []
+
+[5]
+Underfull \hbox (badness 2065) in paragraph at lines 336--337
+[]\T1/ptm/m/n/10 La RAM nec-es-saria per cari-care un in-tero in-dice �
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 336--337
+
+ []
+
+
+Underfull \hbox (badness 1762) in paragraph at lines 338--339
+[]\T1/ptm/m/n/10 BFAST am-mette allinea-menti \T1/ptm/m/it/10 paired-end \T1/pt
+m/m/n/10 o \T1/ptm/m/it/10 mate-pair\T1/ptm/m/n/10 ,
+ []
+
+
+Underfull \hbox (badness 1789) in paragraph at lines 338--339
+\T1/ptm/m/n/10 re-al-iz-zando allinea-menti in-dipen-denti per cias-cun \T1/ptm
+/m/it/10 end \T1/ptm/m/n/10 e
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 338--339
+
+ []
+
+
+Underfull \hbox (badness 1442) in paragraph at lines 341--342
+[]\T1/ptm/m/n/10 Per mostrare le per-for-mance di BFAST esso � stato
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 341--342
+
+ []
+
+
+LaTeX Warning: Reference `img:BFASTperf1' on page 6 undefined on input line 343
+.
+
+
+LaTeX Warning: Reference `img:BFASTperf2' on page 6 undefined on input line 343
+.
+
+
+LaTeX Warning: Reference `img:BFASTperf3' on page 6 undefined on input line 343
+.
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 343--344
+
+ []
+
+
+Underfull \hbox (badness 6188) in paragraph at lines 375--376
+[]\T1/ptm/m/n/10 Novoalign � un prodotto pro-pri-etario di Novocraft
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 375--376
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 386--387
+
+ []
+
+
+Underfull \hbox (badness 2150) in paragraph at lines 388--389
+\T1/ptm/m/n/10 suc-ces-siva SHRiMP2 (David et al. 2010). Quest'ultima
+ []
+
+
+Underfull \hbox (badness 1831) in paragraph at lines 388--389
+\T1/ptm/m/n/10 ver-sione si dis-tingue dalla prece-dente an-dando essa ad
+ []
+
+
+Underfull \hbox (badness 1776) in paragraph at lines 388--389
+\T1/ptm/m/n/10 in-di-ciz-zare non le \T1/ptm/m/it/10 reads \T1/ptm/m/n/10 ma il
+ genoma di rifer-i-mento.
+ []
+
+
+Underfull \hbox (badness 1629) in paragraph at lines 388--389
+\T1/ptm/m/n/10 Tale mod-i-fica ha notevol-mente miglio-rato le prestazioni
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 388--389
+
+ []
+
+
+Underfull \hbox (badness 2538) in paragraph at lines 390--391
+\T1/ptm/m/n/10 L'\T1/ptm/m/it/10 overhead \T1/ptm/m/n/10 prodotto da questa sud
+-di-vi-sione pu� es-sere
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 390--391
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 392--393
+
+ []
+
+[6]
+Underfull \hbox (badness 7415) in paragraph at lines 394--395
+[]\T1/ptm/m/n/10 SHRiMP2 uti-lizza un mec-ca-n-ismo di \T1/ptm/m/it/10 caching
+\T1/ptm/m/n/10 per
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 394--395
+
+ []
+
+
+Underfull \hbox (badness 3735) in paragraph at lines 399--400
+[]\T1/ptm/m/n/10 Gli allineatori di \T1/ptm/m/it/10 reads \T1/ptm/m/n/10 corte
+gen-er-ate dai mod-erni
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 399--400
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 401--402
+
+ []
+
+
+LaTeX Warning: Reference `img:ABMapper' on page 7 undefined on input line 403.
+
+
+Underfull \hbox (badness 3098) in paragraph at lines 403--404
+[]\T1/ptm/m/n/10 La se-quenza ge-nom-ica di rifer-i-mento � in-izial-mente
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 403--404
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 409--410
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 412--413
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 414--415
+
+ []
+
+
+Underfull \hbox (badness 1577) in paragraph at lines 416--417
+\T1/ptm/m/n/10 even-tual-mente ac-cettando un ul-te-ri-ore er-rore che su-pera
+ []
+
+
+Underfull \hbox (badness 2913) in paragraph at lines 416--417
+\T1/ptm/m/n/10 Un'altra fun-zion-al-it� im-por-tante � quella di am-met-tere
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 416--417
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 418--419
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 420--421
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 431--432
+\T1/ptm/m/n/10 Solitamente gli al-go-ritmi di allinea-mento sac-ri-f-i-cano
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 431--432
+
+ []
+
+[7]
+Underfull \hbox (badness 10000) in paragraph at lines 433--434
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 439--440
+[]\T1/ptm/m/n/10 Allineamento: uti-lizza l'\T1/ptm/m/it/10 hash \T1/ptm/m/n/10
+cre-ata nella pre-
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 439--440
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 442--443
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 444--445
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 446--447
+
+ []
+
+
+! LaTeX Error: \begin{document} ended by \end{center}.
+
+See the LaTeX manual or LaTeX Companion for explanation.
+Type H <return> for immediate help.
+ ...
+
+l.450 \end{center}
+
+?
+! Extra \endgroup.
+<recently read> \endgroup
+
+l.450 \end{center}
+
+?
+! Too many }'s.
+\@endfloatbox ...pagefalse \outer@nobreak \egroup
+ \color@endbox
+l.451 \end{figure}
+
+?
+
+! LaTeX Error: \begin{document} ended by \end{figure}.
+
+See the LaTeX manual or LaTeX Companion for explanation.
+Type H <return> for immediate help.
+ ...
+
+l.451 \end{figure}
+
+?
+! Extra \endgroup.
+<recently read> \endgroup
+
+l.451 \end{figure}
+
+?
+
+Overfull \hbox (2.86282pt too wide) in paragraph at lines 457--467
+ []
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 475--478
+\T1/ptm/m/n/10 cre-ato per iden-ti-fi-care SNPs (\T1/ptm/m/it/10 Sin-gle Nu-cle
+otide
+ []
+
+
+Underfull \hbox (badness 2285) in paragraph at lines 475--478
+\T1/ptm/m/it/10 Poly-mor-phisms\T1/ptm/m/n/10 ). Si � evo-luto in tre ver-sioni
+, SOAPv2
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 475--478
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 480--482
+ \T1/ptm/m/it/10 1) SOAPv3: [][] \T1/ptm/m/n/10 Uti-liz-zando il genoma umano c
+ome
+ []
+
+
+Underfull \hbox (badness 3386) in paragraph at lines 480--482
+\T1/ptm/m/n/10 Per allineare 1G di cop-pie di \T1/ptm/m/it/10 reads \T1/ptm/m/n
+/10 (che con-ducono
+ []
+
+
+Underfull \hbox (badness 2401) in paragraph at lines 480--482
+\T1/ptm/m/n/10 ap-prossi-ma-ti-va-mente ad una cop-er-tura 30x del genoma
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 480--482
+
+ []
+
+[8]
+Underfull \hbox (badness 10000) in paragraph at lines 483--485
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 486--487
+\T1/ptm/m/n/10 alla memo-ria, degradando le prestazioni com-p-lessive
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 486--487
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 518--519
+
+ []
+
+
+Underfull \hbox (badness 2393) in paragraph at lines 520--521
+[]\T1/ptm/m/n/10 La ver-sione cor-rente di SOAPv3 ri-esce ad allineare
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 520--521
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 522--524
+[]\T1/ptm/m/n/10 Come ap-pare chiaro dalla tabella VI[] SOAPv3 �
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 522--524
+\T1/ptm/m/n/10 Sono stati in-oltre con-dotti ul-te-ri-ori es-per-i-menti che
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 522--524
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 551--552
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 556--557
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 559--560
+
+ []
+
+(/usr/share/texlive/texmf-dist/tex/latex/ucs/data/uni-32.def
+File: uni-32.def 2012/04/20 UCS: Unicode data U+2000..U+20FF
+)
+Underfull \hbox (badness 10000) in paragraph at lines 561--563
+[]\T1/ptm/m/n/10 Quando si con-sid-er-ano al-go-ritmi per ve-lo-ciz-zare
+ []
+
+
+Underfull \hbox (badness 1655) in paragraph at lines 561--563
+\T1/ptm/m/n/10 l'allineamento di \T1/ptm/m/it/10 reads \T1/ptm/m/n/10 di grandi
+ di-men-sioni la tec-nica
+ []
+
+
+Underfull \hbox (badness 1546) in paragraph at lines 561--563
+\T1/ptm/m/n/10 dell'\T1/ptm/m/it/10 hashing \T1/ptm/m/n/10 non � l'unica da ten
+ere in con-sid-er-azione.
+ []
+
+
+Underfull \hbox (badness 1817) in paragraph at lines 561--563
+\T1/ptm/m/n/10 Sono state pre-sen-tate in-fatti tec-niche che uti-liz-zano un
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 561--563
+\T1/ptm/m/n/10 BWT-SW � in grado di ot-tenere risul-tati iden-tici
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 561--563
+
+ []
+
+[9]
+Underfull \hbox (badness 10000) in paragraph at lines 564--565
+[]\T1/ptm/m/n/10 BWA-SW in-tro-duce eu-ris-tiche per ve-lo-ciz-zare
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 564--565
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 566--567
+[]\T1/ptm/m/n/10 L'algoritmo BWA-SW � im-ple-men-tato come un
+ []
+
+
+Underfull \hbox (badness 2245) in paragraph at lines 566--567
+\T1/ptm/m/n/10 con-tiene tipi-ca-mente di-verse se-quenze (\T1/ptm/m/it/10 read
+s\T1/ptm/m/n/10 ). Cias-cuna
+ []
+
+
+Underfull \hbox (badness 3668) in paragraph at lines 566--567
+\T1/ptm/m/it/10 read \T1/ptm/m/n/10 viene pro-ces-sata in-dipen-den-te-mente, e
+ven-tual-mente
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 566--567
+
+ []
+
+
+Underfull \hbox (badness 2469) in paragraph at lines 568--569
+[]\T1/ptm/m/n/10 Nell'implementazione BWA-SW cerca di ag-giustare i
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 568--569
+
+ []
+
+
+Overfull \hbox (4.87123pt too wide) in paragraph at lines 574--596
+ []
+ []
+
+
+Underfull \hbox (badness 2418) in paragraph at lines 601--603
+\T1/ptm/m/n/10 chiara-mente il pro-gramma pi� ve-loce, molte volte pi�
+ []
+
+
+Underfull \hbox (badness 1365) in paragraph at lines 601--603
+\T1/ptm/m/n/10 di BLAT e SSAHA2 su La pre-ci-sione di BWA-SW �
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 601--603
+
+ []
+
+[10]
+Underfull \hbox (badness 10000) in paragraph at lines 609--610
+
+ []
+
+
+Underfull \hbox (badness 1527) in paragraph at lines 611--612
+[]\T1/ptm/m/n/8 Burrows,M. and Wheeler,D. (1994) A block sort-ing loss-less dat
+a
+ []
+
+
+Underfull \hbox (badness 3354) in paragraph at lines 611--612
+\T1/ptm/m/n/8 com-pres-sion al-go-rithm. Tech-ni-cal Re-port 124, Dig-i-tal Equ
+ip-ment
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 611--612
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 613--614
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 615--616
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 617--618
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 619--620
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 621--622
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 623--624
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 625--626
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 627--628
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 629--630
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 631--632
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 633--634
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 635--636
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 637--638
+
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 639--640
+
+ []
+
+
+Underfull \hbox (badness 3343) in paragraph at lines 641--642
+[]\T1/ptm/m/n/8 Smith,T.F. and Wa-ter-man,M.S. (1981) Iden-ti-fi-ca-tion of com
+-mon
+ []
+
+
+Underfull \hbox (badness 10000) in paragraph at lines 641--642
+
+ []
+
+
+** Conference Paper **
+Before submitting the final camera ready copy, remember to:
+
+ 1. Manually equalize the lengths of two columns on the last page
+ of your paper;
+
+ 2. Ensure that any PostScript and/or PDF output post-processing
+ uses only Type 1 fonts and that every step in the generation
+ process uses the appropriate paper size.
+
+[11] (./paper.aux)
+
+LaTeX Warning: There were undefined references.
+
+
+LaTeX Warning: There were multiply-defined labels.
+
+ )
+Here is how much of TeX's memory you used:
+ 4867 strings out of 493600
+ 65868 string characters out of 3148224
+ 141957 words of memory out of 3000000
+ 8072 multiletter control sequences out of 15000+200000
+ 120930 words of font info for 121 fonts, out of 3000000 for 9000
+ 956 hyphenation exceptions out of 8191
+ 38i,8n,23p,1484b,699s stack positions out of 5000i,500n,10000p,200000b,50000s
+{/usr/share/texlive/texmf-dist/fonts/enc/dvips/base/8r.enc}</usr/share/texliv
+e/texmf-dist/fonts/type1/public/amsfonts/cm/cmex10.pfb></usr/share/texlive/texm
+f-dist/fonts/type1/public/amsfonts/cmextra/cmex7.pfb></usr/share/texlive/texmf-
+dist/fonts/type1/public/amsfonts/cm/cmmi10.pfb></usr/share/texlive/texmf-dist/f
+onts/type1/public/amsfonts/cm/cmmi5.pfb></usr/share/texlive/texmf-dist/fonts/ty
+pe1/public/amsfonts/cm/cmmi7.pfb></usr/share/texlive/texmf-dist/fonts/type1/pub
+lic/amsfonts/cm/cmr10.pfb></usr/share/texlive/texmf-dist/fonts/type1/public/ams
+fonts/cm/cmr5.pfb></usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm
+/cmr7.pfb></usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmsy10.
+pfb></usr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmsy5.pfb></u
+sr/share/texlive/texmf-dist/fonts/type1/public/amsfonts/cm/cmsy7.pfb></usr/shar
+e/texlive/texmf-dist/fonts/type1/urw/courier/ucrr8a.pfb></usr/share/texlive/tex
+mf-dist/fonts/type1/urw/times/utmb8a.pfb></usr/share/texlive/texmf-dist/fonts/t
+ype1/urw/times/utmbi8a.pfb></usr/share/texlive/texmf-dist/fonts/type1/urw/times
+/utmr8a.pfb></usr/share/texlive/texmf-dist/fonts/type1/urw/times/utmri8a.pfb>
+Output written on paper.pdf (11 pages, 439556 bytes).
+PDF statistics:
+ 109 PDF objects out of 1000 (max. 8388607)
+ 76 compressed objects within 1 object stream
+ 0 named destinations out of 1000 (max. 500000)
+ 11 words of extra memory for PDF output out of 10000 (max. 10000000)
+
diff --git a/relazioni/wireless/paper.pdf b/relazioni/wireless/paper.pdf
new file mode 100644
index 0000000..4604134
Binary files /dev/null and b/relazioni/wireless/paper.pdf differ
diff --git a/relazioni/wireless/paper.tex b/relazioni/wireless/paper.tex
new file mode 100644
index 0000000..b2ff3a0
--- /dev/null
+++ b/relazioni/wireless/paper.tex
@@ -0,0 +1,656 @@
+\documentclass[conference]{IEEEtran}
+\usepackage{graphicx}
+\usepackage[utf8x]{inputenc}
+\usepackage{longtable}
+\usepackage[T1]{fontenc}
+\usepackage{amsmath}
+
+\ifCLASSINFOpdf
+\else
+\fi
+\hyphenation{op-tical net-works semi-conduc-tor}
+
+
+\begin{document}
+
+\title{SecureIt: home security has never been so easy\\
+Anno Accademico 2011/2012}
+
+\author{
+\IEEEauthorblockN{Luca Bonato, Marco Ziccardi}
+\IEEEauthorblockA{Corso di studi in Informatica\\
+Facoltà di Scienze MM.FF.NN.\\
+Università degli Studi di Padova\\
+Email: \{lohathe,marco.ziccard\}@gmail.com}
+}
+
+
+\maketitle
+
+
+\begin{abstract}
+Nowadays different applications offer a mechanism to monitor your home environment in order to detect any intrusion. None of that solutions completely exploits phone functionalities to find intruders: accelerometer, camera or microphone are often mutually exclusive. Moreover none of these applications tracks phone's position after an intrusion has been identified. The proposed application aims to collect different solution for motion/presence detection and to track phone's position using any kind of connectivity.
+\end{abstract}
+
+\IEEEpeerreviewmaketitle
+
+\section{\textbf{Introduction}}
+
+The aim of the application development was not only the creation of a home security system but the discovery of phone capabilities too. In fact operations performed by the application are complex and really resource needful:
+\begin{itemize}
+ \item Accelerometer to detect orientation and shake
+ \item Camera to detect motion processing frames
+ \item Microphone to detect environmental sound level
+ \item Wifi or 3G connectivity to upload images and audio
+ \item GPS to get current location
+ \item Bluetooth to upload location in absence of connectivity
+ \item In app encryption in order to securely authenticate the user
+\end{itemize}
+
+To the mobile application is associated a back-end where the application itself uploads images and audio got at the instant of intrusion detection.\\
+
+\section{\textbf{Intrusion detection}}
+Intrusion detection is done in three complementary ways:
+\begin{itemize}
+ \item \textbf{Accelerometer}
+ \item \textbf{Camera}
+ \item \textbf{Microphone}
+\end{itemize}
+
+ \subsection{Accelerometer}
+The accelerometer is used to detect motion of the phone itself. Different sensitivity can be set in order to detect different kinds of motions.\\
+The accelerometer returns a \textit{triple} of three acceleration values on the three axes (\textit{X}, \textit{Y} and \textit{Z}).
+
+\begin{figure}[!ht]
+\begin{center}
+\makebox[\linewidth]{\includegraphics[scale=0.6]{resources/accelerometer.png}}
+\caption{Values and signs of detected acceleration}
+\end{center}
+\end{figure}
+
+Those values allow to detect every orientation taken by the phone except for phone rotations on the \textit{Z} axis when the phone is vertical (this is obvious according to the fact that in such a position the phone is not subject to acceleration variations on that axis).\\
+Those acceleration values are used to move a 3D animation made in OpenGL ES (running on the GPU) that simply uses them to show phone's orientation, see figure \ref{img:opengl}.
+
+\begin{figure}[!ht]
+\begin{center}
+\makebox[\linewidth]{\includegraphics[scale=0.3]{resources/opengl.png}}
+\caption{OpenGL ES 3D animation to show phone orientation}
+\label{img:opengl}
+\end{center}
+\end{figure}
+
+
+Acceleration triple is also used to detect any variation in the phone acceleration. Accelaration variation gives an idea of intensity of phone's \textit{shake} and it is computed as in equation \ref{eq:accel_variation}.\\
+
+\begin{equation}
+variation = \frac{(\Delta accelX)+(\Delta accelY)+(\Delta accelZ)}{\Delta t}
+\label{eq:accel_variation}
+\end{equation}
+\vspace{.5cm}\\
+Three levels of sensitivity are defined:
+\begin{itemize}
+ \item \texttt{LOW}: \texttt{SHAKE\_THRESHOLD = 5000}
+ \item \texttt{MEDUM}: \texttt{SHAKE\_THRESHOLD = 4000}
+ \item \texttt{HIGH}: \texttt{SHAKE\_THRESHOLD = 3000}
+\end{itemize}
+
+If $variation>SHAKE\_THRESHOLD$ the application starts to send alerts according to the specified options.
+
+\subsection{\textbf{Camera}}
+The camera is used to detect motion in the surrounding environment. The frames captured by the camera are processed to detect if any variation ha occurred since last captured frame.\\
+A callback is activated at every captured frame, processing each captured frame would be too expensive for the phone in terms of CPU usage and battery consumption so the processing is reduced at one frame per second.\\
+\subsubsection{\textbf{Motion detection}}
+As said motion detection on the frame matrix is very expensive so the frames are scaled as soon as capture to a size of \texttt{640x480}. In order to detect any variation between two frames only the grayscale image is needed.\\
+A movement is considered to be a difference in number of pixels between two grayscale frames bigger than a certain threshold.\\
+In that case too we have three types of sensitivity, the sensitivity type defines not only the threshold in the number of different pixels (\texttt{NUMBER\_THRESHOLD}) but the threshold needed to consider different two pixels (\texttt{VALUE_THRESHOLD}):
+
+\begin{itemize}
+ \item \texttt{LOW}: \texttt{VALUE\_THRESHOLD = 60, NUMBER\_THRESHOLD = 20000}
+ \item \texttt{MEDUM}: \texttt{VALUE\_THRESHOLD = 50, NUMBER\_THRESHOLD = 10000}
+ \item \texttt{HIGH}: \texttt{VALUE\_THRESHOLD = 40, NUMBER\_THRESHOLD = 9000}
+\end{itemize}
+
+Rispetto ad un algoritmo globale un algoritmo locale nel caso in cui Pv, Pd e Po siano tutti negativi può iniziare un nuovo allineamento.\\
+Il punteggio di un allineamento viene calcolato in maniera diversa nel caso in cui si stia lavorando su sequenze di aminoacidi o di nucleotidi:
+\begin{itemize}
+ \item \textbf{Aminoacidi}: il punteggio di allineamento è dato dalla somma di tutti i punteggi di appaiamento estratti da una \textit{scoring matrix} (sia essa PAM o BLOSUM) meno le penalità per i \textit{gap}. Le penalità per i \textit{gap} sono date da due componenti: la penalità di apertura di un \textit{gap} e la penalità conseguente all'allungamento di un residio (aminoacido) del \textit{gap}
+ \item \textbf{Nucleotidi}: il punteggio è calcolato come sopra tranne per il fatto che la matrice di sostituzione è semplificata: +1 per un \textit{match}, -1 per un \textit{mismatch}
+\end{itemize}
+Le penalità di \textit{gap} sono variabili e dipendono dal contesto di utilizzo.
+
+ \subsection{FASTA}
+
+ Gli algoritmi di programmazione dinamica hanno risolto il problema dell'allineamento di due sequenze ma sono inutilizzabili (troppo lenti) per allineare una sequenza \textit{query} su tutte le sequenze \textit{subject} di una banca dati.\\
+
+
+FASTA (Lipman e Pearson, 1985) è la prima soluzione euristica al problema dell'allineamento utilizzabile su una banca dati.\\
+FASTA si basa su una strategia di indicizzazione di parole di \texttt{ktup} residui (nucleotidi o aminoacidi) dette \textit{k-mers}.
+Tipicamente \texttt{ktup} = 6 per gli allineamenti di sequenze di nucleotidi e \texttt{ktup} = 2 per sequenze di aminoacidi.\\
+FASTA scorre la \textit{query} e memorizza in un indice per ciascuna parola le posizioni in cui essa compare (costo lineare nella lunghezza della \textit{query}). Successivamente scorre ciascuna sequenza \textit{subject k-mer} per \textit{k-mer}, quando uno di questi compare nell'indice l'algoritmo memorizza la diagonale. Vengono poi calcolati i punteggi degli allineamenti di \textit{k-mer} tramite una matrice di sostituzione (PAM o BLOSUM a tolleranza variabile dipendentemente dal contesto), questo calcolo permette di escludere quelle sequenze \textit{subject} che non superano una certa soglia di similarità.\\
+FASTA procede ad estendere ciascuno di questi allineamenti applicando opportune penalità per i \textit{gap} e anche in questo caso scarta le estensioni che non rientrano in una certa soglia di punteggio.\\
+In ultima istanza viene eseguito Smith e Waterman modificato per considerare solo porzioni ristrette adiacenti alle estensioni appena calcolate ($\pm$ 20 aminoacidi).\\
+
+FASTA per mezzo dell'indicizzazione delle parole identifica i \textit{match} possibili prima di effettuare una ricerca di allineamento più onerosa tramite Smith e Waterman.
+
+ \subsection{BLAST}
+BLAST (Altshul et al., 1990) rappresenta ad oggi l'algoritmo più usato per l'allineamento generale di proteine e DNA.\\
+Risulta essere particolarmente efficiente negli allineamenti proteici poichè, invece di creare un indice basato sul \textit{matching} esatto delle parole (come FASTA), crea un indice basato sulla similarità calcolata per mezzo di una matrice di sostituzione (PAM o BLOSUM).\\
+La lunghezza delle parole è definita da un parametro \texttt{W}, tipicamente nel caso di allineamento proteici \texttt{W}=3.\\
+Dopo aver creato l'indice di similarità per la stringa \textit{query} l'algoritmo ricerca i \textit{W-mers} in tutte le sequenze \textit{subject} della base dati. Ogni corrispondenza può potenzialmente essere parte di un allineamento più lungo, si procede quindi all'estensione di tali corrispondenze in entrambe le direzioni ottendendo segmenti di allineamento locale non ulteriormente estendibili detti HSP (\textit{High-Scoring Segment Pair}). Un ulteriore parametro \texttt{X} determina quanto punteggio negativo può accumularsi nel tentativo di estendere una corrispondenza.\\
+
+
+Tutti gli HSP che superano una certa soglia \texttt{S} sono ritenuti significativi.\\
+
+Esistono diverse versioni di blast che realizzano compiti specifici:
+\begin{itemize}
+ \item \textbf{blastp}: ricerca gli allineamenti di una sequenza di aminoacidi su una banca dati di sequenze di aminoacidi
+ \item \textbf{blastn}: ricerca gli allineamenti di una sequenza di nucleotidi su una banca dati di sequenze di nucleotidi
+ \item \textbf{blastx}: ricerca allineamenti in una banca dati di sequenze proteiche a partire da una sequenza \textit{query} di nucleotidi dopo aver tradotto la \textit{query} in una sequenza di aminoacidi secondo tutte le 6 possibili fasi di lettura (\textit{6-frame translations})
+ \item \textbf{tblastn}: ricerca gli allineamenti di una sequenza proteica su una banca dati di sequenze di nucleotidi calcolando per ciascuna sequenza \textit{subject} della banca dati tutte le possibili sequenze di aminoacidi (\textit{6-frame translations})
+ \item \textbf{tblastx}: ricerca gli allineamenti di tutte le possibili traduzioni in sequenza di aminoacidi di una sequenza di nucleotidi con tutte le traduzioni in aminoacidi delle sequenze di una banca dati di nucleotidi. Rappresenta la versione più lenta dell'algoritmo BLAST, confronta sequenze aminoacidiche al posto di nucleotidi per offrire maggior tolleranza (effettua 36 confronti per ogni coppia di sequenze utilizzando matrici di sostituzione) e identificare relazioni di omologia tra sequenze nucleotidiche distanti
+\end{itemize}
+
+ \subsection{Burrows-Wheeler Transformation (BWT)}\label{sec:Burrows-Wheeler Transformation (BWT)}
+
+\begin{table}[!ht]
+\begin{center}
+\begin{tabular}{|c|c|c|}
+\textbf{Permutations} & \textbf{Sorted permutations} & \textbf{Last column}\\
+\hline{}
+&&\\
+googol\$ & \$googol & \textbf{l} \\
+&&\\
+oogol\$g & gol\$goo & \textbf{o} \\
+&&\\
+ogol\$go & googol\$ & \textbf{\$} \\
+&&\\
+gol\$goo & l\$googo & \textbf{o} \\
+&&\\
+ol\$goog & ogol\$go & \textbf{o} \\
+&&\\
+l\$googo & ol\$goog & \textbf{g} \\
+&&\\
+\$googol & oogol\$g & \textbf{g} \\
+
+\end{tabular}
+\end{center}
+\caption{BWT eseguita sulla stringa gogol (\$ indica la fine della stringa)}
+\end{table}
+
+Con l'avvento dei sequenziatori di nuova generazione il numero di \textit{reads} prodotte è aumentato notevolmente e consistentemente anche la quantità di genoma da allineare. Occorrevano metodi sempre più ottimizzati per la realizzazione dell'allineamento.\\
+BWT (Burrows et al., 1994) è un algoritmo utilizzato nella compressione dei dati, sfruttato nel campo della bioinformatica per la creazione di indici di piccole dimensioni e di rapida consultazione.\\
+
+BWT non cambia i valori dei caratteri che compaiono in una stringa ma semplicemente attua delle permutazioni tali che se la stringa in input conteneva caratteri ripetuti nella stringa trasformata questi appariranno di fila, rendendo così più facile la compressione.\\
+La trasformazione viene banalmente fatta ordinando lessicograficamente tutte le permutazioni della stringa in input e prendendo l'ultima colonna.
+
+\section{\textbf{Allineamento di reads corte}}
+
+ \subsection{MAQ}
+MAQ (Li et al., 2008), \textit{Mapping and Assembly with Qualities}, è un programma di allineamento che opera su \textit{reads} di piccole dimensioni prodotte da sequenziatori di nuova generazione, in particolare è progettato per lavorare con Illumina ma è in grado di lavorare anche con \textit{reads} prodotte da SOLiD (e quindi in \textit{color-space}).\\
+
+MAQ differiva dalla maggior parte dei prodotti esistenti. In primo luogo calcola una misura di qualità per ciascun allineamento, misurante la probabibilità dell'allineamento di essere sbagliato (questo approccio aiuta notevolmente l'identificazione delle variazioni). In secondo luogo mappa ogni \textit{read} che abbia un \textit{match}, distribuendo casualmente le \textit{reads} ripetute in una delle alternative a parità di bontà, questo accorgimento solleva dall'ambiguità di definire il concetto di unica occorrenza di una \textit{read}. Inoltre MAQ allinea \textit{mate-pair reads} in una \textit{sliding window}, andando ad esaminare le posizioni accoppiate con poco costo computazionale e permettendo di allineare correttamente anche \textit{reads} ripetute se le loro \textit{mate reads} si trovano in regioni uniche.\\
+
+Alcuni punti chiave dell'algoritmo MAQ sono:
+ \begin{itemize}
+ \item \textbf{Indicizzazione delle reads e scorrimento del genoma di riferimento}: le \textit{reads} sono indicizzate per mezzo di \textit{seeds} di 28 basi, si scorre il genoma di riferimento alla ricerca di \textit{seeds hit} con al più due \textit{mismatch}
+ \item \textbf{Assegnazione di punteggi agli hit e mappatura casuale}: Ad un \textit{hit} viene assegnato un punteggio di $2^{24}*q+h$, dove \texttt{q} è la somma delle qualità delle basi che non si allineano correttamente e \texttt{h} è un intero in 24 bit derivante dall'\textit{hash} delle coordinate dell'\textit{hit} e dell'identificatore della \textit{read}. Come risultato MAQ mappa casualmente una \textit{read} se ci sono \textit{hit} ugualmente buone a causa di ripetizioni nel genoma
+ \item \textbf{Qualità di allineamento}: La qualità di allineamento è la probabilità che l'allineamento di una \textit{read} sia sbagliato. Dato un genoma di riferimento \texttt{x} lungo \texttt{L} e una \textit{read} \texttt{z} lunga \texttt{l} la probabilità che \texttt{z} sia mappata in \texttt{u} è:
+\begin{center}
+$
+p_s(u|x,z) = \frac{p(z|x,u)}{\sum_{v=1}^{L-l+1}p(z|x,v)}
+$
+\end{center}
+Dove \texttt{p(z|x,u)} equivale al prodotto delle probabilità di errori delle basi che non si allineano. La qualità di un allineamento è:
+\begin{center}
+$
+Q_s(u|x,z) = -10 log_{10}\left[1-p_s(u|x,z)\right]
+$
+\end{center}
+ \item \textbf{Indels corti}: per le coppie di \textit{reads} tali che solo una viene allineata è utilizzato Smith e Waterman con \textit{gaps} per la \textit{read} associata in una regione ristretta determinata a seconda della dimensione dell'inserto, come in figura \ref{img:MAQ1}
+
+ \item \textbf{Identificazione consensus}: forniti dei dati \texttt{D} di allineamento su una posizione si calcola $P(D|<b1,b1>)$, $P(D|<b2,b2>)$ e $P(D|<b1,b2>)$, assumento che il campione su cui si sta lavorando sia diploide. La conoscenza della probabilità a priori di un eterozigote $<b1,b2>$ permette di calcolare la probabilità di ciascun genotipo. Il consensus $\hat g$ è il genotipo che massimizza la probabilità a posteriori e la sua qualità è $-10 log_{10}\left[1-P(\hat g|D)\right]$\\
+ \end{itemize}
+
+MAQ utilizza per l'allineamento 6 ore di CPU e 800MB di memoria per 1 milione di coppie di \textit{reads} ed è facilmente parallelizzabile su \textit{clusters}. Genera file binari compressi sia per gli allineamenti (1 byte per ciascun nucleotide delle \textit{reads}) sia per il consensus (4 byte per ciascun nucleotide sul genoma di riferimento). Fornisce inoltre un visualizzatore dei risultati dell'allineamento detto \textit{maqview} che permette di identificare graficamente la posizione di una qualsiasi \textit{read} sul genoma.\\
+
+Le prestazioni di MAQ sono riassunte in figura \ref{img:MAQ2} e sono state estratte dai dati di allineamento di 100 millioni di coppie di \textit{reads} da 35 basi (estratte da un campione diploide con 0.1\% di sostituzioni e 0.01\% di \textit{indels} di una base) sul genoma umano.
+
+ \subsection{Bowtie}
+Bowtie (Langmead et al., 2009) usa un indice costruito tramite \textit{Burrows-Wheeler Transformation} e promette di avere una piccola occupazione di memoria (circa 1.3GB per l'intero genoma umano).\\
+
+Bowtie effettua alcuni compromessi per fornire la sua velocità e il suo scarso utilizzo di memoria, esso infatti non garantisce la più alta qualità di \textit{mapping} delle \textit{reads} se non esiste alcun \textit{match} esatto. Inoltre può fallire nell'allineare alcune \textit{reads} quando configurato per eseguire alla massima velocità. Possiede diverse opzioni per bilanciare questo \textit{trade-off}.
+
+ \subsection{BWA}
+ BWA (Li e Durbin, 2009), \textit{Burrows-Wheeler Aligner}, può essere visto come una evoluzione di MAQ. Mentre MAQ utilizza un indice basato su \textit{hash} per cercare il genoma di riferimento BWA utilizza un indice costruito con BWT che permette ricerche più veloci del suo predecessore.\\
+
+ \subsubsection{Prefix trie e string matching}
+ Un \textit{prefix trie} per una stringa \texttt{X} è un albero in cui ogni arco è etichettato con un simbolo e la concatenazione delle etichette nel cammino da una foglia alla radice rappresenta un prefisso di \texttt{X}. Dato un \textit{prefix trie} cercare se una \textit{query} \texttt{W} è una sottostringa esatta di \texttt{X} equivale a cercare il nodo che rappresenta \texttt{W} e ciò può essere fatto in tempo \texttt{O(|W|)}. Per consentire \textit{mismatch} possiamo compiere un attraversamento esaustivo dell'albero e confrontare \texttt{W} con ogni possibile cammino.\\
+
+ \subsubsection{BWT e suffix array}
+ Supponiamo di aver calcolato la \textit{Burrows-Wheeler Transformation} e di averla memorizzata in \texttt{B}. Un \textit{suffix array} \texttt{S} di una stringa \texttt{X} lunga \texttt{n} è una permutazione degli indici \texttt{0 ... n-1} tale che \texttt{S[i]} è la posizione iniziale dell'i-esimo suffisso più piccolo.\\
+
+La maggior parte degli algoritmi per la costruzione di un \textit{suffix array} richiedono \texttt{O(nlogn)} in memoria, risultando in $\tilde{12GB}$ per l'intero genoma umano, recentemente Hon et al. (2007) hanno presentato una nuova tecnica che permette di costruire l'albero dei suffissi per l'intero genoma umano in spazio (nei picchi) <1GB. Tale tecnica è adottata da BWA.\\
+
+ \subsubsection{Intervalli nel suffix array}
+ Se una stringa \texttt{W} è una sottostringa di \texttt{X}, la posizione di ogni occorrenza di \texttt{W} in \texttt{X} si troverà in un intervallo nel \textit{suffix array} dal momento che tutti i suffissi contenenti \texttt{W} sono ordinati insieme. Definiamo quindi:\\
+\begin{center}
+$\bar{R}$(W) = max\{k : W è prefisso di X$_{S(k)}$\}\\
+$\underline{R}$(W) = min\{k : W è prefisso di X$_{S(k)}$\}\\
+\end{center}
+
+ \subsubsection{Matching esatto}
+ Sia \texttt{C(a)} il numero di simboli in \texttt{X[0,n−2]} che sono lessicograficamente minori di un \texttt{a} appartenente all'alfabeto e \texttt{O(a,i)} il numero di occorrenze di \texttt{a} in \texttt{B[0,i]}. Ferragina e Manzini (2000) provarono che, se \texttt{W} è una sottostringa di \texttt{X}, allora:
+\begin{center}
+$\bar{R}$(aW) = C(a)+O(a,$\underline{R}$(W))\\
+$\underline{R}$(aW) = C(a)+O(a,$\bar{R}$(W)−1)+1
+\end{center}
+Questo risultato permette di controllare se \texttt{W} è una sottostringa di \texttt{X} e contare le occorenze di \texttt{W} in tempo \texttt{O(|W|)} calcolando iterativamente \texttt{$\bar{R}$} e \texttt{\underline{R}} a partire dalla fine di \texttt{W}. Questa procedura è chiamata \textit{backward search}.\\
+
+ \subsubsection{Matching non esatto}
+ L'algoritmo data una stringa \texttt{W} cerca gli intervalli nel \textit{suffix array} di \texttt{X} delle sottostringhe che hanno un \textit{match} con \texttt{W} con non più di \texttt{z} differenze. Essenzialmente la ricerca di un \textit{match} non esatto usa \textit{backward search} per campionare sottostringhe distinte dal genoma. Questo processo è limitato dall'\textit{array} \texttt{D}, tale che \texttt{D[i]} è il limite inferiore al numero di differenze in \texttt{W[0,i]}. Meglio è stimato \texttt{D} più si restringe lo spazio di ricerca nel \textit{suffix trie} e quindi più è efficiente l'algoritmo. Un \textit{bound} semplice per \texttt{D} è \texttt{D[i]=0} per ogni \texttt{i} ma questo risulta in un algoritmo molto inefficiente.\\
+
+ \subsubsection{Valutazione delle prestazioni}
+ Nel valutare le prestazioni di BWA sono state utilizzate quelle di altri tre programmi: MAQ, SOAPv2 e Bowtie. MAQ indicizza le \textit{reads} tramite una \textit{hash table} mentre SOAPv2 e Bowtie sono altri due algoritmi che utilizzano BWT.
+Sono stati condotti esperimenti sia con dati simulati sia con dati reali.\\
+
+\begin{table}
+\begin{center}
+\begin{tabular}{|c|ccc|ccc|}
+ & \multicolumn{3}{c|}{Single-end} & \multicolumn{3}{c|}{Paired-end} \\
+Program & Time(s) & Conf(\%) & Err(\%) & Time(s) & Conf(\%) & Err(\%)\\
+\hline{}
+& & & & & & \\
+Bowtie-32 & 1271 & 79.0 & 0.76 & 1391 & 85.7 & 0.57 \\
+& & & & & & \\
+BWA-32 & 823 & 80.6 & 0.30 & 1224 & 89.6 & 0.32 \\
+& & & & & & \\
+MAQ-32 & 19797 & 81.0 & 0.14 & 21589 & 87.2 & 0.07 \\
+& & & & & & \\
+SOAP2-32 & 256 & 78.6 & 1.16 & 1909 & 86.8 & 0.78 \\
+& & & & & & \\
+\hline{}
+& & & & & & \\
+Bowtie-70 & 1726 & 86.3 & 0.20 & 1580 & 90.7 & 0.43 \\
+& & & & & & \\
+BWA-70 & 1599 & 90.7 & 0.12 & 1619 & 96.2 & 0.11 \\
+& & & & & & \\
+MAQ-70 & 17928 & 91.0 & 0.13 & 19046 & 94.6 & 0.05 \\
+& & & & & & \\
+SOAP2-70 & 317 & 90.3 & 0.39 & 708 & 94.5 & 0.34 \\
+& & & & & & \\
+\hline{}
+& & & & & & \\
+Bowtie-125 & 1966 & 88.0 & 0.07 & 1701 & 91.0 & 0.37 \\
+& & & & & & \\
+BWA-125 & 3021 & 93.0 & 0.05 & 3059 & 97.6 & 0.04 \\
+& & & & & & \\
+MAQ-125 & 17506 & 92.7 & 0.08 & 19388 & 96.3 & 0.02 \\
+& & & & & & \\
+SOAP2-125 & 555 & 91.5 & 0.17 & 1187 & 90.8 & 0.14 \\
+\end{tabular}
+
+\end{center}
+\caption{Prestazioni di BWA per l'allineamento di un milione di coppie di \textit{reads} di 32, 70 e 125 basi simulate da un genoma umano con frequenza di SNP (\textit{Single Nucleotide Polimorphism}) pari a 0.09\%, una frequenza di \textit{indels} pari a 0.01\% una frequenza uniforme di errori di sequenziamento di 2\%. Sono mostrati i tempi di esecuzione (calcolati su un \textit{core} del processore 2.5 GHz Xeon E5420I), la stima percentuale di \textit{reads} allineate correttamente e la percentuale di errore in tale stima}
+\label{tab:BWA1}
+\end{table}
+
+\begin{itemize}
+ \item \textbf{Dati simulati:}
+Sono state simulate \textit{reads} dal genoma umano con lo strumento \textit{wgsim} incluso nel pacchetto \textit{SAMtools} e successivamente sono stati eseguti i quattro programmi per allineare tali \textit{reads} sul genoma umano. La tabella \ref{tab:BWA1} mostra come BWA e MAQ raggiungano la stessa accuratezza nell'allineamento mentre BWA risulta essere più preciso sia di SOAPv2 che di Bowtie. Per quanto concerne la velocità SOAPv2 è decisamente il più veloce per l'allineamento \textit{single-end} ma viene recuperato nell'allineamento \textit{paired-end} nel quale BWA risulta essere migliore in due casi su tre (\textit{reads} di 32 e 125 basi).\\
+Per quello che riguarda la memoria SOAPv2 usa 5.4GB. Sia Bowtie che BWA utilizzano 2.3GB per l'allineamento \textit{single-end} mentre circa 3GB per il \textit{paired-end}, più grande della memoria necessaria a MAQ che è di circa 1GB. Tuttavia l'utilizzo di memoria negli algoritmi basati su BWT non dipende dal numero di \textit{reads} da allineare mentre l'occupazione di MAQ è lineare in esso. Inoltre gli allineatori centrati su BWT supportano il \textit{multi-threading}.\\
+ \item \textbf{Dati reali:}
+ L'allineamento è stato fatto utilizzando 12.2 milioni di coppie di \textit{reads} di 51 basi prodotte dal sequenziatore Illumina. Le prestazioni misurate sono mostrate in tabella \ref{tab:BWA2}.
+
+\begin{table}
+\begin{center}
+\begin{tabular}{c c c c}
+Program & Time(h) & Conf(\%) & Paired(\%) \\
+\hline{}
+&&&\\
+Bowtie & 5.2 & 84.4 & 96.3 \\
+&&&\\
+BWA & 4.0 & 88.9 & 98.8 \\
+&&&\\
+MAQ & 94.9 & 86.1 & 98.7 \\
+&&&\\
+SOAP2 & 3.4 & 88.3 & 97.5 \\
+\end{tabular}
+\end{center}
+\caption{Sono mostrati i tempi di esecuzione (calcolati su un \textit{core} del processore 2.5 GHz Xeon E5420I), la stima percentuale di \textit{reads} allineate correttamente e la stima percentuale con le \textit{mate-pairs} mappate nel corretto orientamento da BWA}
+\label{tab:BWA2}
+\end{table}
+
+\end{itemize}
+
+
+ \subsection{mrFAST e mrsFAST}
+ I programmi mr- e mrsFAST (Alkan et al., 2009; Hach et al., 2010) sono degni di nota dal momento che restituiscono tutti i possibili allineamenti di una \textit{read} su un genoma, non soltanto l'unico allineamento migliore. L'abilità di riportare tutte le possibili locazioni del genoma è molto utile per l'identificazione delle variazioni strutturali, infatti questi due algoritmi sono stati sviluppati proprio a questo scopo.\\
+
+mr- e mrsFAST utilizzano un metodo \textit{seed-and-extend} per l'allineamento, creano indici di una \textit{hash table} per il genoma di riferimento, ciascuna \textit{read} viene suddivisa in \textit{first middle} e \textit{last k-mers} (di default \texttt{k}=12), ciascuno di questi \textit{k-mer} viene cercato nel \textit{hash} per fissare i \textit{seeds} di allineamento.
+
+ \subsection{BFAST}
+ BFAST (Homer et al., 2009) è un algoritmo per allineare \textit{reads} corte su un genoma di riferimento di grandi dimensioni.\\
+ Realizza l'allineamento in due fasi:
+ \begin{itemize}
+ \item Crea indici multipli sul genoma di riferimento
+ \item Identifica le CAL (\textit{Candidate Alignment Locations}) per ciascuna \textit{read}, successivamente queste CAL sono allineate localmente usando \textit{gap} per identificare il miglior \textit{match}. Questa tecnica si applica alle sequenze in \textit{base-space} (Illumina e 454) e in \textit{color-space} (SOLiD). L'allineamento usando \textit{gap} permette di identificare SNP (\textit{Single Nucleotide Polimorphism}), inserzioni e delezioni, oltre che errori nella sequenza in \textit{color-space}\\
+ \end{itemize}
+
+ BFAST utilizza un indice multiplo prestando bene attenzione a sfruttarlo il più possibile quando esso viene caricato in RAM.
+ Ciascun indice è un \textit{suffix array} ottimizzato del genoma di riferimento che indicizza un \textit{seed}, una stringa di 0 e 1 che inizia e finisce con 1, che definisce le basi nella \textit{read} che si stanno considerando in un \textit{lookup}.\\
+Chiamiamo \texttt{k} (\textit{key size}) il numero di 1 in un \textit{seed} mentre \texttt{w} (\textit{key width}) il numero di 0 e 1. Il numero di CAL identificate dall'algoritmo dipende da \texttt{k} e dalla complessità e quantità di ripetizioni presenti nel genoma di riferimento. Con \texttt{k} maggiori in media si ha un \textit{lookup} più probabilmente unico nell'indice ma si riduce anche il numero di \textit{lookup} totali, rendendo l'algoritmo meno sensibile.\\
+Solitamente per il genoma umano viene preferito \texttt{k} = 18 per \textit{reads} corte ($\le$ 40 bp) e \texttt{k} = 22 per \textit{reads} più lunghe ($\ge$ 40 bp) per bilanciare sensibilità e unicità del \textit{lookup}. Scegliere \texttt{k} di minori dimensioni è utile per le \textit{reads} corte dal momento che così aumenta il numero di \textit{offsets} e la sensibilità migliora.\\
+BFAST implementa un \textit{hash} verso l'indice che riduce il tempo di \textit{lookup} e consiste delle prime \texttt{j} basi (\texttt{j} è detta \textit{hash width}) degli indici di riferimento, con \texttt{j} $\le$ \texttt{k}. \textit{Hash width} è sempre più corta di \textit{key size}.\\
+
+La RAM necessaria per caricare un intero indice è approssimativamente 17GB, che porta in pratica alla necessità di 24GB di RAM per prestazioni ottime, quantità elevata ma raggiungibile dai moderni computer. Inoltre BFAST è in grado di scomporre l'indice in $4^n$ componenti: in questo modo, nonostante la fase di \textit{lookup} richieda più tempo dal momento che essa andrà replicata su ogni indice parziale, BFAST per l'intero genoma riesce ad eseguire su computer con solo 4GB di RAM.\\
+
+BFAST ammette allineamenti \textit{paired-end} o \textit{mate-pair}, realizzando allineamenti indipendenti per ciascun \textit{end} e annotando il collegamento tra \textit{pair-ends}.\\
+
+
+Per mostrare le performance di BFAST esso è stato confrontato con altri software disponibili utilizzando \textit{reads} diverse per dimensione e tipo. A questo scopo sono stati utilizzati sia dati simulati che dati reali.\\
+
+Nelle figure \ref{img:BFASTperf1}, \ref{img:BFASTperf2}, \ref{img:BFASTperf3} viene effettuata una valutazione degli algoritmi di allineamento su un insieme di 10,000 \textit{reads} simulate in \textit{base-space}.\\
+
+\begin{table}
+\begin{center}
+\begin{tabular}{|c|c|c|c|c|}
+& Illumina & Illumina & ABI SOLiD & ABI SOLiD \\
+& 3.5M 55bp & 3.5M 55bp & 1M 50bp & 1M 50bp \\
+& Time (s) & \% mapped & Time (s) & \% mapped \\
+\hline{}
+&&&&\\
+BFAST & 47,474 & 69.6 & 42,856 & 72.5 \\
+&&&&\\
+BOWTIE & 857 & 55.7 & not supported & not supported \\
+&&&&\\
+BWA & 4,883 & 59.3 & 845 & 47.8 \\
+&&&&\\
+MAQ & 126,541 & 73.6 & 6,680 & 68.1 \\
+&&&&\\
+SHRiMP & 324,380 & 83.3 & 32,644 & 70.4 \\
+&&&&\\
+SOAP & 131,248 & 62.4 & 131,248 & 62.4 \\
+&&&&\\
+\end{tabular}
+\end{center}
+\caption{Risultati nei tempi di allineamento e nel numero di \textit{reads} allineate correttamente di vari algoritmi su due \textit{datasets} reali differenti in relazione a tempi e percentuali di BFAST}
+\label{tab:BFASTperf4}
+
+\end{table}
+
+In tabella \ref{tab:BFASTperf4} i tempi di allineamento sono stati calcolati su due tipologie di \textit{reads}, prodotte in un caso da Illumina in \textit{base-space} e nel secondo caso da SOLiD in \textit{color-space}, è mostrata inoltre la percentuale di \textit{reads} allineate correttamente.
+
+ \subsection{Novoalign}
+ Novoalign è un prodotto proprietario di Novocraft (Novocraft, 2000) che utilizza una strategia di \textit{hashing} simile a MAQ (Li et al., 2008).\\
+
+Novoalign è diventato piuttosto popolare nelle recenti pubblicazioni a causa della sua accuratezza, esso inoltre ammette fino a 8 \textit{mismatch} per \textit{read} nell'allineamento di una sola \textit{end}.
+
+ \subsection{SHRiMP}
+
+SHRiMP (Rumble et al., 2009) è un programma di allineamento specializzato nel mappare \textit{reads} in \textit{color-space} generate dal sequenziatore SOLiD. Dal momento che la conversione di sequenze da \textit{base-space} a \textit{color-space} è univoca è possibile utilizzarlo anche per quest'ultime.\\
+SHRiMP utilizza tutti i recenti avanzamenti nell'allineamento di sequenze:
+\begin{itemize}
+ \item \textit{Q-gram filters} (Rasmussen et al., 2005): che consentono di cominciare l'allineamento con \textit{seeds} che abbiano più di un \textit{match}
+ \item \textit{Spaced seeds} (Califano and Rigoutsos, 1993): che ammettono sezioni di \textit{mismatch} predeterminate nelle sequenze \textit{seed}s
+ \item Hardware specializzato: implementazioni ed istruzioni particolari che permettono di velocizzare l'algoritmo standard Smith e Waterman\\
+\end{itemize}
+SHRiMP è stato ulteriormente migliorato nella sua versione successiva SHRiMP2 (David et al. 2010). Quest'ultima versione si distingue dalla precedente andando essa ad indicizzare non le \textit{reads} ma il genoma di riferimento. Tale modifica ha notevolmente migliorato le prestazioni permettendo l'aggiunta di una modalità per l'allineamento \textit{paired-end} e ha aperto la strada al \textit{multi-threading}.\\
+
+L'indice del genoma di riferimento è caricato in RAM, per l'intero genoma umano arriva ad occupare 48GB. SHRiMP2 offre tuttavia degli strumenti per scomporre tale indice in componenti che rientrino in una certa quantità di RAM. L'\textit{overhead} prodotto da questa suddivisione può essere trascurato.\\
+
+Diversi \textit{threads} sono usati per allineare le \textit{reads}. Utilizzando dei \textit{seeds} sono letti e cercati nell'indice tutti i possibili \textit{k-mer} della \textit{reads}. Tali posizioni dell'indice corrispondono a delle diagonali nella matrice di allineamento. Date queste diagonali è possibile costruire un insieme di CML (\textit{Candidate Mapping Locations}).\\
+
+SHRiMP2 utilizza un meccanismo di \textit{caching} per velocizzare l'allineamento di \textit{reads} provenienti da sequenze ripetute: dopo ciascun all'ineamento viene calcolato un \textit{hash} della regione e salvato il punteggio, in caso di successive richieste per quella regione il punteggio non sarà ricalcolato.\\
+
+L'unico programma che sia effettivamente confrontabile con SHRiMP2 è BFAST in quanto gli intenti di sviluppo sono praticamente gli stessi: preferire la correttezza alla velocità. Come BFAST, SHRiMP2 garantisce alta precisione anche per \textit{reads} molto polimorfe. Nei test SHRiMP2 raggiunge una precisione simile o addirittura maggiore a quella di BFAST per tutti i tipi di polimorfismo, eseguendo inoltre tra le 2 e le 5 volte più velocemente.
+
+ \subsection{ABMapper}
+ Gli allineatori di \textit{reads} corte generate dai moderni sequenziatori forniscono un'idea dell'allineamento ma non sono in grado di gestire adeguatamente \textit{reads} provenienti da sequenziamento di RNA che si trovino a cavallo di posizioni tra le quali è avvenuto \textit{splicing} o che appartengano a sequenze ripetute e che possono quindi essere mappate su più posizioni nel genoma.\\
+
+ABMapper (Chan et al., 2010) vuole essere uno strumento in grado di analizzare \textit{reads} a cavallo di regioni che abbiano subito \textit{splicing} o appartenenti a regioni ripetute.\\
+
+La sequenza genomica di riferimento è inizialmente inidicizzata in \textit{k-mers} secondo un \texttt{k} definito dall'utente. Dopo l'indicizzazione per ciascuna \textit{read} che si vuole allineare sono estratti due \textit{seeds} (chiamati \texttt{A} e \texttt{B}, dai quali deriva il nome del programma) di lunghezza \texttt{k} da ciascuna estremità della \textit{read} e sono estesi tramite allineamento uno verso l'altro, come in figura \ref{img:ABMapper}.\\
+
+
+Due scenari possono manifestarsi durante l'estensione di un \textit{seed}:
+\begin{itemize}
+ \item \textit{Exonic alignment}: la \textit{read} non si trova a cavallo di due regioni che hanno subito \textit{splicing}, viene esteso soltanto un \textit{seed}
+ \item \textit{Spliced alignment}: entrambi i \textit{seeds} sono estesi finchè non viene trovato un punto di terminazione. Un buon allineamento in questo caso prevede che i due \textit{seeds} siano estesi indipendentemente fino a che l'intera \textit{read} non è coperta. Se l'allungamento tollera errori però un \textit{seed} può essere esteso oltre il suo reale punto di terminazione. In questi casi l'algoritmo tollererà e correggerà le sovrapposizioni\\
+\end{itemize}
+
+ABMapper supporta diversi formati in input: semplici file di testo, FASTA e FASTQ. Inoltre ABMapper è in grado di estrarre \textit{reads} mappate su più di una posizione nel genoma o non mappate da file SAM/BAM prodotti da BWA per tentare un ulteriore allineamento.\\
+
+La lunghezza \texttt{k} di un \textit{seed} determina la velocità di ricerca, la sensibilità e la precisione, più essa è corta più l'allineamento diventa accurato ma aumentano i tempi di esecuzione. ABMapper permette all'utente di definire tale dimensione coerentemente con la dimensione del campione (numero di \textit{reads} da allineare) e la potenza di calcolo a disposizione. La dimensione di default è 10.\\
+
+ABMapper tollera dinamicamente l'errore ammettendo che alcune \textit{reads} siano ulteriormente estese oltre il loro limite eventualmente accettando un ulteriore errore che supera quello di \textit{cutoff}. Questa tecnica è molto utile nel caso di \textit{paired-end reads} che sono affette dal problema noto secondo il quale la seconda \textit{read} ha una qualità inferiore (errori maggiormente frequenti) rispetto alla prima.\\ Un'altra funzionalità importante è quella di ammettere sovrapposizioni tra frammenti di una \textit{read} che abbia subito \textit{splicing}, la regione sovrapposta può essere ulteriormente analizzata.\\
+
+ABMapper è in grado di identificare probabili siti di \textit{splicing} utilizzando motivi canonici come \texttt{GT-AG}, \texttt{GC-AG} e \texttt{AT-AC} per riconoscere possibili giunzioni, specialmente nel caso in cui nell'estensione siano identificati due frammenti sovrapposti.\\
+
+Elementi ripetuti nella sequenza possono essere filtrati secondo un numero di ripetizioni soglia specificato dall'utente.\\
+
+ABMapper cerca di fornire più informazioni utili possibili oltre al semplice allineamento (in formato SAM e BED), come dettagli sull'allineamento, siti di \textit{splicing} e \textit{reads} ripetute.
+
+ \subsection{rNA}
+ rNA (Policriti et al., 2011) è una allineatore numerico di \textit{reads} corte.\\
+ Gli strumenti di allineamento di \textit{reads} di piccole dimensioni sono sviluppati tenendo conto di due fattori:
+ \begin{itemize}
+ \item Migliorare la velocità: al fine di mantenere il passo della mole sempre più ingente di dati prodotti
+ \item Migliorare la correttezza: ovvero massimizzare il numero di \textit{reads} posizionate correttamente sul genoma di riferimento, essendo sicuri di averle allineate su tutte le possibili locazioni
+ \end{itemize}
+ Solitamente gli algoritmi di allineamento sacrificano leggermente la correttezza per ottenere maggiore velocità, ammettendo un numero limitato di \textit{mismatches} per ogni \textit{read}. Per massimizzare questo \textit{trade-off} strumenti come Bowtie (Langmead et al., 2009) e BWA (Li and Durbin, 2009) utilizzano l'euristica \textit{seed-and-extend}: al fine di allineare una \textit{read} \texttt{r} una condizione necessaria è che \texttt{l} basi con \texttt{l} $<$ \texttt{|r|} della \texttt{read} abbiano un \textit{match} quasi esatto sul genoma di riferimento. BFAST invece opera favorendo la correttezza piuttosto che la velocità permettendo allineamenti con un numero grande di \textit{mismatch} e \textit{indels}, purtroppo per fare questo è di un ordine di grandezza più lento dei precedenti algoritmi.\\
+
+rNA (\textit{randomized Numerical Aligner}) supporta FASTA e FASTQ come formati in input e SAM/BAM come formati in output, è in grado di allineare sia \textit{single reads} che \textit{paired-end reads} e può eseguire sia in architetture parallele che distribuite.\\
+
+rNA è uno strumento accurato per l'allineamento di \textit{reads} con grande polimorfismo, presenza di errori e \textit{indels} di piccole dimensioni, è creato per lavorare in \textit{base-space} e quindi maggiormente indicato per Illumina \textit{reads} ma può lavorare anche su SOLiD \textit{reads} dopo una opportuna conversione da \textit{color} a \textit{base-space}.\\
+Come la maggior parte dei software di allineamento anche rNA è diviso in due fasi:
+ \begin{itemize}
+ \item Pre-elaborazione del genoma di riferimento: costruisce un \textit{hash} del genoma di riferimento dato in input
+ \item Allineamento: utilizza l'\textit{hash} creata nella pre-elaborazione per allineare le \textit{reads} contro il genoma, questa fase può essere parallelizzata e distribuita sui diversi nodi di un \textit{cluster}\\
+ \end{itemize}
+\subsubsection{Hashing e strategia di allineamento}
+rNA è basato su un metodo semplice ma efficiente originalmente proposto da Rabin e Karp (Rabin e Karp, 1987). Un \textit{pattern} di lunghezza \texttt{l} in un alfabeto $\sum$ può essere rappresentato come un numero in base |$\sum$|. Nelle applicazioni pratiche questo numero non rientra nella dimensione di una parola della memoria, tale condizione è molto sfavorevole dal momento che le operazioni numeriche sono ritenute eseguire in tempo costante solo per quei numeri che stanno in una parola. A tale scopo Rabin e Karp definiscono il concetto di \textit{fingerprint} ovvero la rappresentazione numerica di un \textit{pattern} modulo un dato numero primo \texttt{q} tale che il valore di \textit{fingerprint} rientri in una parola di memoria. Rabin e Karp hanno dimostrato che calcolando tutti i \textit{fingerprint} delle sottostringhe lunghe \texttt{l} di un testo \texttt{T} la ricerca di \textit{match} avviene in tempo \texttt{O(|T|)} (si noti che confrontanto i \textit{fingerprint} non si ottengono i \textit{match} esatti poichè la codifica numerica modulo \texttt{q} non è univoca). Tale approccio viene leggermente esteso da Olicriti et al. per gestire efficientemente anche \textit{mismatches}. La \textit{hash table} dei \textit{fingerprints} viene salvata con spazio proporzionale a \texttt{|T|} (dimensione del genoma di riferimento) e \texttt{q} (dimensione della \textit{hash table}), richiedendo \texttt{4q + 5|T|} bytes.\\
+\subsubsection{Indels}
+Quando rNA non riesce ad allineare una \textit{read} con la tecnica basata su Rabin e Karp con l'estensione per i \textit{mismatch} prova un allineamento con una versione modificata di Smith e Waterman che supporta piccoli \textit{indels}.\\
+\subsubsection{∆-search}
+Identificare se una \textit{read} compare una sola volta nel genoma ha un importante valore biologico. Le tecniche adottate precedentemente prevedevano di identificare il \textit{match} migliore per una \textit{read} (minimo numero di \textit{mismatch} \texttt{k}) e se nessun altro \textit{match} lo uguagliava la \textit{read} era ritenuta unica sul genoma. rNA introduce una tecnica detta \textit{∆-search} che permette di tenere in considerazione anche le \textit{reads} con numero di \textit{mismatch} tra \texttt{k+1} e \texttt{k+∆}.\\
+
+
+
+\end{center}
+\end{figure}
+
+Le prestazioni di rNA sono state confrontate con i maggiori programmi di allineamento: BFAST (Homer et al., 2009), Bowtie (Langmead et al., 2009), and BWA (Li e Durbin, 2009). Il lavoro di confronto è stato portato avanti sia su dati simulati che su dati reali su una macchina con un processore 8-core 2.5Ghz Intel(R) Xeon(R) e 32GB RAM, sempre usando 8 \textit{threads}.
+
+\begin{table}
+\begin{center}
+\begin{tabular}{|c|c|c|c|c|}
+& BFAST & BOWTIE & BWA & rNA\\
+\hline{}
+&&&&\\
+time (hh:mm:ss) & 510:33:32 & 01:21:02 & 8:05:30 & 20:10:35 \\
+&&&&\\
+\% align & 74.12\% (94.03\%) & 69.19\% & 76.25\% & 79.4\% \\
+&&&&\\
+RAM & 17.4GB & 3.5GB & 3.7GB & 19.8GB \\
+\end{tabular}
+\end{center}
+\caption{Tempi e percentuali di allineamenti corretti ottenuti da rNA di 166,622,914 reads prodotte dal sequenziatore Illumina}
+\end{table}
+
+Tutti i programmi di allineamento sono stati eseguiti con i parametri di default fatta eccezione per rNA per il quale è stata disabilitata l'opzione di \textit{auto trimming}. Dal momento che BFAST è stato creato per allineare \textit{reads} corte a grande distanza per esso sono state filtrate le \textit{reads} allineate con più di 7 \textit{mismatches} (senza limiti per il numero di \textit{indels}), tra parentesi viene espresso il suo output originale. BFAST è uno strumento per allineare tutte le reads ma nell'utilizzo pratico richiede troppo tempo. Al contraro Bowtie è lo strumento più veloce ma le sue prestazioni sono ottenute al prezzo di un peggiore allineamento. rNA e BWA raggiungono risultati simili: rNA allinea circa 3\% in più delle \textit{reads} ma d'altro canto BWA è più veloce.
+
+ \subsection{SOAP}
+
+SOAP è un algoritmo di allineamento specificatamente creato per identificare SNPs (\textit{Single Nucleotide Polymorphisms}).
+Si è evoluto in tre versioni, SOAPv2 (Li et al., 2009) come BWA e il suo predecessore MAQ migliora SOAPv1 (Li et al., 2008) utilizzando un indice basato su \textit{Burrows-Wheeler Transformation} (BTW). Questo ha migliorato notevolmente la velocità di allineamento e l'utilizzo di memoria.\\
+SOAPv2 determina \textit{match} costruendo una \textit{hash table} che accelera ulteriormente le ricerce nell'indice del genoma di riferimento.\\
+ \subsubsection{SOAPv3}
+
+ Utilizzando il genoma umano come riferimento, allineare 70 milioni di coppie di read (equivalente al prodotto di una corsa del sequenziatore Illuminal HiSeq 2000) con al massimo 4 \textit{mismatches} richiede più di 3.5 ore utilizzando l'allineatore più veloce esistente.\\
+Per allineare 1G di coppie di \textit{reads} (che conducono approssimativamente ad una copertura 30x del genoma umano) sono necessari più di due giorni per completare il processo di allineamento. Detto questo appare molto difficile ridurre i tempi utilizzando una singola CPU.\\
+
+SOAPv3 (Li et al., 2012) utilizza i multi-processori in una GPU (\textit{Graphic Processing Unit}) per migliorare sensibilmente le prestazioni. SOAPv3 sviluppa una versione per GPU delle strutture dati per l'indicizzazione compressa del genoma di riferimento utilizzata da SOAPv2 e basate su BWT.\\
+SOAPv3 introduce a tale scopo due novità.\\
+
+La ricerca di \textit{pattern} utilizzando BWT richiede un numero piuttosto alto di accessi in RAM. Una implementazione diretta della tecnica per \textit{single} CPU su GPU porterebbe ad avere un numero notevole di \textit{threads} in accesso concorrente alla memoria, degradando le prestazioni complessive dell'algoritmo. Questo problema è stato risolto modificando la struttura dati per ridure quanto più possibile gli accessi a memoria pur mantenendo l'efficienza dell'indicizzazione.\\
+
+La seconda difficoltà incontrata risiedeva nel fatto che le GPU lavorano in modalità SIMT (\textit{Single-Instruction Multiple-Thread}). Processori nella stessa unità (detta \textit{Streaming Multiprocessor} - SM) devono eseguire la stessa istruzione. Troppi \textit{branch} divergenti nel cammino dell'esecuzione parallela possono forzare alcuni processori ad andare in \textit{idle}.
+
+\begin{table*}[ht]
+\begin{center}
+\begin{tabular}{c|cc|cc|cc|cc|cc}
+\multicolumn{11}{c}{\textbf{70.7M read pairs}} \\
+& \multicolumn{2}{c|}{4 Mismatch} & \multicolumn{2}{c|}{3 Mismatch} & \multicolumn{2}{c|}{2 Mismatch} & \multicolumn{2}{c|}{1 Mismatch} & \multicolumn{2}{c}{0 Mismatch}\\
+& (s) & (\%) & (s) & (\%) & (s) & (\%) & (s) & (\%) & (s) & (\%) \\
+&&&&&&&&&&\\
+SOAPv3 & 1839 & 81.46 & 1019 & 79.43 & 695 & 76.48 & 521 & 70.94 & 452 & 53.11 \\
+&&&&&&&&&&\\
+BWA & 13756 & 81.03 & 10590 & 79.19 & 8920 & 76.38 & 6064 & 70.90 & 5272 & 53.11 \\
+&&&&&&&&&&\\
+Bowtie & \multicolumn{2}{c|}{Not supported} & 29178 & 79.42 & 2082 & 76.47 & 1570 & 70.93 & 1216 & 53.10 \\
+&&&&&&&&&&\\
+\multicolumn{11}{c}{\textbf{25.3M read pairs}} \\
+& \multicolumn{2}{c|}{4 Mismatch} & \multicolumn{2}{c|}{3 Mismatch} & \multicolumn{2}{c|}{2 Mismatch} & \multicolumn{2}{c|}{1 Mismatch} & \multicolumn{2}{c}{0 Mismatch}\\
+& (s) & (\%) & (s) & (\%) & (s) & (\%) & (s) & (\%) & (s) & (\%) \\
+&&&&&&&&&&\\
+SOAPv3 & 735 & 86.58 & 453 & 85.34 & 356 & 83.46 & 291 & 79.17 & 452 & 60.30 \\
+&&&&&&&&&&\\
+BWA & 4700 & 86.17 & 3803 & 85.12 & 3298 & 83.38 & 2352 & 79.17 & 5272 & 60.30 \\
+&&&&&&&&&&\\
+Bowtie & \multicolumn{2}{c|}{Not supported} & 9486 & 83.45 & 617 & 76.47 & 1570 & 79.17 & 1216 & 60.13 \\
+\end{tabular}
+\end{center}
+\caption{Tempi di esecuzione e percentuali di \textit{reads} allineate di SOAPv3, BWA e Bowtie su due \textit{paired-end datasets} con 70.7M e 25.3M coppie di \textit{reads}. I tempi riportati includono il tempo di caricamente dell'indice in memoria, il tempo di lettura delle \textit{reads} ed il tempo di allineamento vero e proprio. Al fine di migliorarne le prestazioni BWA viene eseguito disabilitando l'allineamento con \textit{gap}}
+\label{tab:SOAPv3}
+\end{table*}
+
+Purtroppo il numero di \textit{branch} divergenti che la ricerca di un \textit{pattern} può introdurre non può essere determinato se non a tempo di esecuzione. SOAPv3 stima un parametro in grado di dire a \textit{runtime} se un \textit{pattern} introdurrà troppi \textit{branch} divergenti (in questo caso si parla di \textit{hard patterns}). SOAPv3 termina l'esecuzione di \textit{hard patterns}, li raggruppa e va ad allinearli in un secondo momento allo scopo di ridurre il tempo di \textit{idle} dei processori.\\
+
+La versione corrente di SOAPv3 riesce ad allineare \textit{reads} con un numero di \textit{mismatches} non superiore a 4. Le prestazioni di SOAPv3 sono state confrontate con Bowtie e BWA su un computer con 3.07GHz quad-core CPU e 24GB di RAM. SOAPv3 è supportato dalla scheda grafica NVIDIA GTX 580 con 3GB di memoria, necessita infatti di una GPU CUDA con almeno 2.5GB di memoria per indicizzare il genoma umano.\\
+
+Come appare chiaro dalla tabella \ref{tab:SOAPv3} SOAPv3 è notevolmente più veloce di BWA e Bowtie.\\
+Sono stati inoltre condotti ulteriori esperimenti che confrontano le prestazioni di SOAPv3 con la precedente versione SOAPv2, ottenendo i dati in tabella \ref{tab:SOAPv3vsSOAPv2}.\\
+
+\begin{table}[!ht]
+\begin{center}
+\begin{tabular}{ccccc}
+& \multicolumn{2}{c}{SOAPv3} & \multicolumn{2}{c}{SOAPv2} \\
+& (s) & (\%) & (s) & (\%) \\
+Index loading & 133 & & 40 & \\
+&&&&\\
+\multicolumn{5}{c}{\textbf{HiSeq dataset: 70.7M}}\\
+&&&&\\
+Read loading & 259 & & 259 & \\
+4 mismatch alignment & 1447 & 81.46\% & 12206 & 77.25\% \\
+3 mismatch alignment & 626 & 79.43\% & 12198 & 76.65\% \\
+2 mismatch alignment & 303 & 76.48\% & 4370 & 76.48\% \\
+&&&&\\
+\multicolumn{5}{c}{\textbf{G. A. II dataset: 25.3M}}\\
+&&&&\\
+Read loading & 107 & & 107 & \\
+4 mismatch alignment & 294 & 86.58\% & 3495 & 84.13\% \\
+3 mismatch alignment & 212 & 85.34\% & 3453 & 83.63\% \\
+2 mismatch alignment & 356 & 83.46\% & 1465 & 83.46\% \\
+\end{tabular}
+\end{center}
+\caption{Tempi di esecuzione e percentuali di reads allineate di SOAPv3 e SOAPv2 su due \textit{paired-end datasets} con 70.7M e 25.3M coppie di \textit{reads}}
+\label{tab:SOAPv3vsSOAPv2}
+\end{table}
+
+Come SOAPv2 il formato dei dati in output di SOAPv3 include testo e formato SAM/BAM.\\
+
+Attualmente gli sviluppatori di SOAPv3 stanno lavorando ad alcuni miglioramenti per mezzo di programmazione dinamica \textit{GPU-based} in modo da riportare gli allineamenti con \textit{gap} e \textit{indels}. I risultati finora ottenuti mostrano che le percentuali di \textit{reads} allineate dovrebbero migliorare di un 5-6\%.
+
+\section{\textbf{Allineamento di reads lunghe}}
+Negli ultimi anni sono state sviluppate molte soluzioni in grado di allineare \textit{reads} di piccole dimensioni su un genoma di riferimento, tali soluzioni non sono in grado di gestire \textit{reads} di maggiori dimensioni dal momento che sono specificatamente costruite per lavorare su \textit{reads} corte e con una bassa frequenza di errori. Per \textit{reads} lunghe soluzioni basate sull'\textit{hashing} come BLAT e SSAHA2 rappresentano l'unica scelta ma sono notevolmente più lente delle soluzioni per \textit{reads} di piccole dimensioni in termini di basi allineate per unità di tempo.\\
+
+\subsection{BWA-SW}
+Nell'allineamento di \textit{reads} corte si cercano quanto più possibile situazioni di \textit{match} esatto fatta eccezione per gli estremi di ciascuna \textit{read} che sono strutturalmente più soggetti ad errori. Questo ragionamento non è valido per le \textit{reads} più lunghe per le quali è più utile ricercare allineamenti locali dal momento che esse sono più soggette a variazioni strutturali ed errori di assemblaggio. Inoltre allineatori di \textit{reads} corte perdono molto in termini di prestazioni quando devono effettuare allineamenti con \textit{gap} (solitamente ammettono un numero limitato di \textit{gap} consecutivi), gli allineatori di \textit{reads} lunghe devono invece essere molto permissivi con i \textit{gap} dal momento che gli \textit{indels} occorrono più frequentemente in \textit{reads} lunghe e possono essere la principale causa di errore in sequenziatori come 454 e Pacific Bioscience.\\
+
+Quando si considerano algoritmi per velocizzare l'allineamento di \textit{reads} di grandi dimensioni la tecnica dell'\textit{hashing} non è l'unica da tenere in considerazione. Sono state presentate infatti tecniche che utilizzano un algoritmo dimanico come Smith e Waterman con alberi dei suffissi del genoma di riferimento (Meek et al., 2003), queste tecniche allineano effettivamente la sequenza \textit{query} con ogni sotto-sequenza del riferimento estratta tramite un attraversamento \textit{top-down}. Se le sotto-sequenze equivalenti fossero rappresentate come un unico cammino sul \textit{suffix tree} si risparmirebbe spazio e tempo evitando allineamenti ripetuti su sequenze identiche. In questa direzione Lam et al. (2008) rappresentarono l'albero dei suffissi tramite l'indice di Ferragina e Manzini che è basato su BWT, l'algoritmo che utilizzata tale struttura dati per allineare \textit{reads} lunghe prende il nome di BWT-SW (\textit{Burrows-Wheeler Aligner’s Smith-Waterman Alignment}).\\
+BWT-SW è in grado di ottenere risultati identici all'allineamento con Smith e Waterman ma lo fa migliaia di volte più velocemente rispetto ad allineamenti contro il genoma umano. BWT-SW in questa versione semplificata resta più lento di BLAST per lunghe sequenze \textit{query} ma trova tutti gli allineamenti senza utilizzare euristiche.\\
+
+BWA-SW introduce euristiche per velocizzare l'allineamento. In un certo senso BWA-SW segue il paradigma \textit{seed-and-extends}, ma, diversamente da BLAT e SSAHA2, BWA-SW identifica i \textit{seeds} per mezzo di programmazione dinamica su due indici di Ferraggina Manzini e ammette \textit{mismatch} e \textit{gap} all'interno dei \textit{seeds} stessi. BWA-SW estende un \textit{seed} soltanto quando esso ha poche orrenze nel genoma di riferimento, la velocità viene ottenuta riducendo estensioni non necessarie per sequenze ripetute.\\
+
+L'algoritmo BWA-SW è implementato come un componente del programma BWA (Li and Durbin, 2009). L'implementazione prende in input un indice BWA e una \textit{query} in formato FASTA o FASTQ e restituisce come risultato l'allineamento in formato SAM. Il file della sequenza \textit{query} contiene tipicamente diverse sequenze (\textit{reads}). Ciascuna \textit{read} viene processata indipendentemente, eventualmente usando più \textit{threads}. L'utilizzo della memoria è dominato dalla dimensione dell'indice di Ferragina e Manzini, 3.7GB per il genoma umano. La memoria necessaria per ogni \textit{read} è approssimativamente proporzionale alla lungezza della \textit{read}, su misure tipiche di \textit{reads} la memoria totale occupata è $<$ 4GB.\\
+
+Nell'implementazione BWA-SW cerca di aggiustare i propri parametri sulla base della lunghezza delle \textit{reads} e della frequenza di errori di sequenziamento per fare in modo che le impostazioni di default si comportino meglio su input con caratteristiche differenti.\\
+
+Le prestazioni di BWA-SW sono state misurate confrontandole con quelle di BLAT e SSAHA2 sia su dati simulati che su dati reali. Il confronto su dati reali risulta essere più complesso e meno attendibile dal momento che mancano certezze sui risultati dell'allineamento per \textit{reads} lunghe. Per quello che riguarda i dati simulati in tabella \ref{tab:BWA-SW} sono stati calcolati su \textit{reads} di diversa lunghezza con una frequenza di errore del 2\%.
+
+\begin{table}
+\begin{center}
+\begin{tabular}{|c|c|c|c|c|c|}
+Programma-Metriche & 100bp & 200bp & 500bp & 1,000bp & 10,000bp \\
+\hline{}
+&&&&&\\
+BLAT-time & 685 & 819 & 1078 & 1315 & 2628 \\
+&&&&&\\
+BLAT-Q20\% & 68.7 & 92.0 & 97.1 & 97.7 & 98.4 \\
+&&&&&\\
+BLAT-errAlg\% & 0.99 & 0.55 & 0.17 & 0.01 & 0.00 \\
+&&&&&\\
+BWA-SW-time & 165 & 222 & 249 & 234 & 158 \\
+&&&&&\\
+BWA-SW-Q20\% & 85.1 & 93.8 & 96.1 & 96.9 & 98.4\\
+&&&&&\\
+BWA-SW-errAlg\% & 0.01 & 0.00 & 0.00 & 0.00 & 0.00\\
+&&&&&\\
+SSAHA2-time & 4872 & 1932 & 3311 & 1554 & - \\
+&&&&&\\
+SSAHA2-Q20\% & 85.5 & 93.4 & 96.6 & 97.7 & - \\
+&&&&&\\
+SSAHA2-errAlg\% & 0.00 & 0.01 & 0.00 & 0.00 & - \\
+\end{tabular}
+\end{center}
+\caption{Circa 10,000,000 di basi raggruppate in \textit{reads} di diversa lunghezza sono simulate a partire dal genoma umano. Il 20\% degli errori sono \textit{indels} con lunghezza che evolve secondo una distribuzione geometrica. Queste \textit{reads} simulate sono allineate sul genoma umano con BLAT, BWA-SW e SSAHA2. Le coordinate di allineamento sono poi confrontate con le coordinate simulate per trovare gli errori di allineamento. I dati rappresentati sono il tempo su un \textit{core} di un processore Intel E5420 2.5 GHz CPU, la percentuale di \textit{reads} allineate con qualità maggiore o uguale a 20 (Q20) e la percentuale di allineamenti errati in tale Q20}
+\label{tab:BWA-SW}
+\end{table}
+
+Dalla tabella \ref{tab:BWA-SW} è possibile vedere che BWA-SW è chiaramente il programma più veloce, molte volte più di BLAT e SSAHA2 su
+La precisione di BWA-SW è paragonabile a quella di SSAHA2 quando la query è di grandi dimensioni, quando invece è più piccola SSAHA2 è più accurato anche se deve spendere molto più tempo per l'allineamento. SSAHA2 non viene confrontato con le \textit{reads} di 10,000 basi dal momento che non è stato inizialmente pensato per tale compito e si comporta conseguentemente male. BLAT sembra essere più performante di SSAHA2 ma soltanto perchè viene eseguito con l'opzione \texttt{-fastMap} e paga questa velocità con meno precisione, con le opzioni di default BLAT è più accurato ma 10 volte più lento di SSAHA2 e comunque non accurato quanto BWA-SW.\\
+
+Per quello che riguarda la memoria sia BWA-SW che BLAT utilizzano circa 4GB. SSAHA2 utilizza 2.4GB per \textit{reads} più lunghe di 500 basi e 5.3GB per reads più corte (utilizzando l'opzione -454 che aumenta il numero di sequenze \textit{seed} salvate nell'\textit{hash} e quindi la memoria utilizzata). Inoltre BWA-SW supporta il \textit{multi-threading} quindi può richiedere meno memoria per ciascun \textit{core} se è eseguito su un \textit{multi-core}. SSAHA2 e BLAT non supportano per ora il \textit{multi-threading}.
+
+\begin{thebibliography}{1}
+
+\bibitem{}
+Altschul,S,. et al. (1990) Basic local alignment search tool. Journal of Molecular Biology, 215, 403–410. \\
+\bibitem{}
+Burrows,M. and Wheeler,D. (1994) A block sorting lossless data compression algorithm. Technical Report 124, Digital Equipment Corporation.\\
+\bibitem{}
+Chan,T. et al. (2010) ABMapper: a suffix array-based tool for multi-location searching and splice-junction mapping. Bioinformatics, 27, 421-422.\\
+\bibitem{}
+David,M. et al. (2011) SHRiMP2: Sensitive yet Practical Short Read Mapping. Bioinformatics, 27, 1011–1012.\\
+\bibitem{}
+Ferragina,P. and Manzini,G. (2000) Opportunistic data structures with applications. In Proceedings of the 41st Symposium on Foundations of Computer Science (FOCS 2000), IEEE Computer Society, 390–398.\\
+\bibitem{}
+Homer,N. et al. (2009) Bfast: an alignment tool for large scale genome resequencing. PLoS ONE, 4, e7767.\\
+\bibitem{}
+Karp,R. and Rabin,M. (1987) Efficient randomized pattern-matching algorithms. IBM J. Res. Develop., 31, 249–260.\\
+\bibitem{}
+Li,H. et al. (2008) Mapping short DNA sequencing reads and calling variants using mapping quality scores. Genome Res., 18, 1851–1858.\\
+\bibitem{}
+Li,H. and Durbin,R. (2009) Fast and accurate short read alignment with Burrows-Wheeler transform. Bioinformatics, 25, 1754–1760.\\
+\bibitem{}
+Li,H. and Durbin,R. (2010) Fast and accurate long-read alignment with Burrows-Wheeler transform. Bioinformatics, 26, 589–595.\\
+\bibitem{}
+Li,R. et al. (2008) SOAP: short oligonucleotide alignment program. Bioinformatics, 24, 713–714.\\
+\bibitem{}
+Li,R. et al. (2009) SOAP2: an improved ultrafast tool for short read alignment. Bioinformatics, 25, 1966–1967.\\
+\bibitem{}
+Li,R. et al. (2012) SOAP3: Ultra-fast GPU-based parallel alignment tool for short reads.\\
+\bibitem{}
+Lipman,D.J. and Pearson,W.R. (1988) Improved tools for biological sequence comparison. Biochemistry, 85, 2444-2448.\\
+\bibitem{}
+Policriti,A. et al. (2011) rNA: a Fast and Accurate Short Reads Numerical Aligner. Bioinformatics Advance Access.\\
+\bibitem{}
+Ruffalo,M. et al. (2011) Comparative analysis of algorithms for next-generation sequencing read alignment. Bioinformatics, 27, 2790-2796.\\
+\bibitem{}
+Smith,T.F. and Waterman,M.S. (1981) Identification of common molecular subsequences. J. Mol. Biol., 147, 195–197.\\
+\end{thebibliography}
+
+% that's all folks
+\end{document}
+
+
diff --git a/relazioni/wireless/resources/.~lock.BWA-SW.ods# b/relazioni/wireless/resources/.~lock.BWA-SW.ods#
new file mode 100644
index 0000000..9368d25
--- /dev/null
+++ b/relazioni/wireless/resources/.~lock.BWA-SW.ods#
@@ -0,0 +1 @@
+Marco Ziccardi,marco,PortatileMarco,08.04.2012 12:22,file:///home/marco/.libreoffice/3;
\ No newline at end of file
diff --git a/relazioni/wireless/resources/accelerometer.png b/relazioni/wireless/resources/accelerometer.png
new file mode 100644
index 0000000..9b6cf18
Binary files /dev/null and b/relazioni/wireless/resources/accelerometer.png differ
diff --git a/relazioni/wireless/resources/bare_adv.tex b/relazioni/wireless/resources/bare_adv.tex
new file mode 100644
index 0000000..bb0abe8
Binary files /dev/null and b/relazioni/wireless/resources/bare_adv.tex differ
diff --git a/relazioni/wireless/resources/opengl.png b/relazioni/wireless/resources/opengl.png
new file mode 100644
index 0000000..a55f536
Binary files /dev/null and b/relazioni/wireless/resources/opengl.png differ
diff --git a/relazioni/wireless/resources/paper.log b/relazioni/wireless/resources/paper.log
new file mode 100644
index 0000000..27ce384
--- /dev/null
+++ b/relazioni/wireless/resources/paper.log
@@ -0,0 +1,41 @@
+This is pdfTeX, Version 3.1415926-2.5-1.40.13 (TeX Live 2013/dev) (format=pdflatex 2012.10.18) 24 DEC 2012 08:43
+entering extended mode
+ restricted \write18 enabled.
+ %&-line parsing enabled.
+**paper.tex
+(../paper.tex
+LaTeX2e <2011/06/27>
+Babel <v3.8m> and hyphenation patterns for english, dumylang, nohyphenation, po
+lish, russian, ukrainian, basque, ibycus, irish, indonesian, catalan, slovak, p
+ortuguese, german, ngerman, swissgerman, welsh, dutch, friulan, slovenian, roma
+nian, danish, german-x-2012-05-30, ngerman-x-2012-05-30, hungarian, greek, espe
+ranto, bulgarian, romansh, latin, serbian, serbianc, italian, estonian, croatia
+n, coptic, czech, spanish, galician, afrikaans, mongolian, mongolianlmc, kurman
+ji, french, ukenglish, usenglishmax, icelandic, turkish, armenian, bokmal, nyno
+rsk, interlingua, swedish, finnish, uppersorbian, pinyin, loaded.
+
+! LaTeX Error: File `IEEEtran.cls' not found.
+
+Type X to quit or <RETURN> to proceed,
+or enter new name. (Default extension: cls)
+
+Enter file name: X
+
+ )
+(\end occurred when \ifx on line 2 was incomplete)
+(\end occurred when \ifx on line 2 was incomplete)
+Here is how much of TeX's memory you used:
+ 12 strings out of 493600
+ 191 string characters out of 3148224
+ 47806 words of memory out of 3000000
+ 3387 multiletter control sequences out of 15000+200000
+ 3640 words of font info for 14 fonts, out of 3000000 for 9000
+ 953 hyphenation exceptions out of 8191
+ 10i,0n,7p,51b,8s stack positions out of 5000i,500n,10000p,200000b,50000s
+
+No pages of output.
+PDF statistics:
+ 0 PDF objects out of 1000 (max. 8388607)
+ 0 named destinations out of 1000 (max. 500000)
+ 1 words of extra memory for PDF output out of 10000 (max. 10000000)
+
diff --git a/src/me/ziccard/secureit/Preview.java b/src/me/ziccard/secureit/Preview.java
index 9df81db..9ee49f8 100644
--- a/src/me/ziccard/secureit/Preview.java
+++ b/src/me/ziccard/secureit/Preview.java
@@ -10,6 +10,7 @@ import java.util.List;
import me.ziccard.secureit.async.MotionAsyncTask;
import me.ziccard.secureit.async.MotionAsyncTask.MotionListener;
import me.ziccard.secureit.codec.ImageCodec;
+import me.ziccard.secureit.motiondetection.LuminanceMotionDetector;
import android.content.Context;
import android.graphics.Bitmap;
import android.graphics.Rect;
@@ -59,6 +60,11 @@ public class Preview extends SurfaceView implements SurfaceHolder.Callback {
*/
private int imageCount = 0;
+ /**
+ * Sensitivity of motion detection
+ */
+ private int motionSensitivity = LuminanceMotionDetector.MOTION_MEDIUM;
+
SurfaceHolder mHolder;
public Camera camera;
@@ -72,6 +78,20 @@ public class Preview extends SurfaceView implements SurfaceHolder.Callback {
mHolder = getHolder();
mHolder.addCallback(this);
prefs = new SecureItPreferences(context);
+
+ /*
+ * Set sensitivity value
+ */
+ if (prefs.getCameraSensitivity().equals("Medium")) {
+ motionSensitivity = LuminanceMotionDetector.MOTION_MEDIUM;
+ Log.i("CameraFragment", "Sensitivity set to Medium");
+ } else if (prefs.getCameraSensitivity().equals("Low")) {
+ motionSensitivity = LuminanceMotionDetector.MOTION_LOW;
+ Log.i("CameraFragment", "Sensitivity set to Low");
+ } else {
+ motionSensitivity = LuminanceMotionDetector.MOTION_HIGH;
+ Log.i("CameraFragment", "Sensitivity set to High");
+ }
}
public void addListener(MotionListener listener) {
@@ -151,7 +171,8 @@ public class Preview extends SurfaceView implements SurfaceHolder.Callback {
data,
size.width,
size.height,
- updateHandler);
+ updateHandler,
+ motionSensitivity);
for (MotionListener listener : listeners) {
Log.i("Preview", "Added listener");
task.addListener(listener);
@@ -161,6 +182,10 @@ public class Preview extends SurfaceView implements SurfaceHolder.Callback {
public void onProcess(Bitmap oldBitmap, Bitmap newBitmap,
boolean motionDetected) {
+
+ if (motionDetected) {
+ Log.i("MotionListener", "MotionDetected");
+ }
Log.i("MotionListener", "Allowing further processing");
doingProcessing = false;
}
diff --git a/src/me/ziccard/secureit/async/MotionAsyncTask.java b/src/me/ziccard/secureit/async/MotionAsyncTask.java
index ced912c..9d0fe9a 100644
--- a/src/me/ziccard/secureit/async/MotionAsyncTask.java
+++ b/src/me/ziccard/secureit/async/MotionAsyncTask.java
@@ -29,6 +29,7 @@ public class MotionAsyncTask extends Thread {
private int width;
private int height;
private Handler handler;
+ private int motionSensitivity;
// Output data
@@ -51,12 +52,14 @@ public class MotionAsyncTask extends Thread {
byte[] rawNewPic,
int width,
int height,
- Handler updateHanlder) {
+ Handler updateHandler,
+ int motionSensitivity) {
this.lastPic = lastPic;
this.rawNewPic = rawNewPic;
this.width = width;
this.height = height;
- this.handler = updateHanlder;
+ this.handler = updateHandler;
+ this.motionSensitivity = motionSensitivity;
}
@@ -71,6 +74,7 @@ public class MotionAsyncTask extends Thread {
lastBitmap = newBitmap;
} else {
IMotionDetector detector = new LuminanceMotionDetector();
+ detector.setThreshold(motionSensitivity);
List<Integer> changedPixels =
detector.detectMotion(lastPic, newPic, width, height);
hasChanged = false;
diff --git a/src/me/ziccard/secureit/async/upload/PeriodicPositionUploaderTask.java b/src/me/ziccard/secureit/async/upload/PeriodicPositionUploaderTask.java
index 615f4a3..f546e18 100644
--- a/src/me/ziccard/secureit/async/upload/PeriodicPositionUploaderTask.java
+++ b/src/me/ziccard/secureit/async/upload/PeriodicPositionUploaderTask.java
@@ -82,8 +82,10 @@ public class PeriodicPositionUploaderTask extends AsyncTask<Void, Void, Void> im
this.context = context;
locationManager = (LocationManager) context.getSystemService(Context.LOCATION_SERVICE);
- locationManager.requestLocationUpdates(LocationManager.NETWORK_PROVIDER, 0, 0, this);
- locationManager.requestLocationUpdates(LocationManager.GPS_PROVIDER, 0, 0, this);
+ if (locationManager.getAllProviders().contains(LocationManager.NETWORK_PROVIDER))
+ locationManager.requestLocationUpdates(LocationManager.NETWORK_PROVIDER, 0, 0, this);
+ if (locationManager.getAllProviders().contains(LocationManager.GPS_PROVIDER))
+ locationManager.requestLocationUpdates(LocationManager.GPS_PROVIDER, 0, 0, this);
prefs = new SecureItPreferences(context);
diff --git a/src/me/ziccard/secureit/fragment/AccelerometerFragment.java b/src/me/ziccard/secureit/fragment/AccelerometerFragment.java
index a3710f4..6fd3d5d 100644
--- a/src/me/ziccard/secureit/fragment/AccelerometerFragment.java
+++ b/src/me/ziccard/secureit/fragment/AccelerometerFragment.java
@@ -1,6 +1,7 @@
package me.ziccard.secureit.fragment;
import me.ziccard.secureit.R;
+import me.ziccard.secureit.SecureItPreferences;
import me.ziccard.secureit.service.BluetoothService;
import android.app.Activity;
import android.content.ComponentName;
@@ -34,27 +35,40 @@ public class AccelerometerFragment extends Fragment implements SensorEventListen
* Accelerometer sensor
*/
private Sensor accelerometer;
+
/**
* OpenGL view to show accelerometer informations
*/
private AccelerometerGLSurfaceView view;
+
/**
* Last update of the accelerometer
*/
private long lastUpdate = -1;
+
/**
* Current accelerometer values
*/
private float accel_values[];
+
/**
* Last accelerometer values
*/
private float last_accel_values[];
+
+ /**
+ * Data field used to retrieve application prefences
+ */
+ private SecureItPreferences prefs;
+
/**
* Shake threshold
*/
- private static final int SHAKE_THRESHOLD = 3000;
+ private static int SHAKE_THRESHOLD = 3000;
+ /**
+ * Text showing accelerometer values
+ */
private TextView accelerometerText;
@@ -113,6 +127,22 @@ public class AccelerometerFragment extends Fragment implements SensorEventListen
@Override
public void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
+ prefs = new SecureItPreferences(getActivity());
+
+ /*
+ * Set sensitivity value
+ */
+ if (prefs.getAccelerometerSensitivity().equals("Medium")) {
+ SHAKE_THRESHOLD = 4000;
+ Log.i("AccelerometerFragment", "Sensitivity set to 4000");
+ } else if (prefs.getAccelerometerSensitivity().equals("Low")) {
+ SHAKE_THRESHOLD = 5000;
+ Log.i("AccelerometerFragment", "Sensitivity set to 5000");
+ } else {
+ SHAKE_THRESHOLD = 3000;
+ Log.i("AccelerometerFragment", "Sensitivity set to 3000");
+ }
+
getActivity().bindService(new Intent(getActivity(),
BluetoothService.class), mConnection, Context.BIND_ABOVE_CLIENT);
}
diff --git a/src/me/ziccard/secureit/motiondetection/IMotionDetector.java b/src/me/ziccard/secureit/motiondetection/IMotionDetector.java
index 8aec57a..98c3d45 100644
--- a/src/me/ziccard/secureit/motiondetection/IMotionDetector.java
+++ b/src/me/ziccard/secureit/motiondetection/IMotionDetector.java
@@ -16,4 +16,9 @@ public interface IMotionDetector {
*/
public List<Integer> detectMotion(int[] oldImage, int[] newImage, int width, int height);
+ /**
+ * Sets the sensitivity
+ * @param thresh
+ */
+ public void setThreshold(int thresh);
}
diff --git a/src/me/ziccard/secureit/motiondetection/LuminanceMotionDetector.java b/src/me/ziccard/secureit/motiondetection/LuminanceMotionDetector.java
index aaf40a3..7027d64 100644
--- a/src/me/ziccard/secureit/motiondetection/LuminanceMotionDetector.java
+++ b/src/me/ziccard/secureit/motiondetection/LuminanceMotionDetector.java
@@ -17,11 +17,11 @@ public class LuminanceMotionDetector implements IMotionDetector {
private int NUMBER_THRESHOLD = 10000;
/**
- *
+ * Levels of motion detection
*/
- private static final int MOTION_LOW = 0;
- private static final int MOTION_MEDIUM = 1;
- private static final int MOTION_HIGH = 2;
+ public static final int MOTION_LOW = 0;
+ public static final int MOTION_MEDIUM = 1;
+ public static final int MOTION_HIGH = 2;
/**
* Sets different sensitivity for the algorithm