Skip to content

Write HTML. Render video. Built for agents.

docs: guide and skill note for opt-in capture motion blur (#6049)

Vance Ingalls4a788583f6ff
diff --git a/docs/docs.json b/docs/docs.json
index 93c96f02c0..90b5c44470 100644
--- a/docs/docs.json
+++ b/docs/docs.json
@@ -1001,6 +1001,7 @@
"concepts/frame-adapters",
"concepts/determinism",
"guides/html-in-canvas",
+ "guides/motion-blur",
"guides/vfx-chain",
"guides/figma"
]
diff --git a/docs/guides/motion-blur.mdx b/docs/guides/motion-blur.mdx
new file mode 100644
index 0000000000..dc83da5e3a
--- /dev/null
+++ b/docs/guides/motion-blur.mdx
@@ -0,0 +1,87 @@
+---
+title: "Motion Blur"
+description: "Smear fast-moving elements along their path, in Studio preview and in renders. Off until you turn it on."
+---
+
+Capture motion blur gives fast-moving elements a real shutter smear. For each frame, HyperFrames reads where every mover was across the shutter interval and redraws it along that path. A box sliding across the frame leaves a streak instead of a sharp copy at one position.
+
+It is **opt-in**. Nothing blurs until you add `data-motion-blur="on"` to the composition root.
+
+## Turn it on
+
+```html
+<div
+ id="root"
+ data-composition-id="main"
+ data-width="1920"
+ data-height="1080"
+ data-duration="10"
+ data-motion-blur="on"
+>
+ ...
+</div>
+```
+
+That is all. The same attribute drives Studio preview and `hyperframes render`, so what you see is what you render.
+
+| Attribute | Default | Meaning |
+| --- | --- | --- |
+| `data-motion-blur` | none | `on` enables blur. `off` opts out, on the root or on any subtree. |
+| `data-motion-blur-shutter` | `180` | Shutter angle in degrees, 0–720. Larger is a longer smear. |
+| `data-motion-blur-samples` | `16` | Sub-frame samples per frame, 2–64. More is smoother and slower. |
+| `data-motion-blur-events` | off | `on` also runs timeline callbacks (`onUpdate` and similar) at each sample. Use it when the motion is driven by callbacks, which blur cannot otherwise see. |
+
+## What it blurs
+
+Elements that move quickly in 2D: position, scale and rotation changes from GSAP, CSS animations and transitions, and the Web Animations API. Slow movers and static content are left sharp. A composition with nothing moving is never wrapped and does no per-frame blur work; the one-time discovery scan still runs on first play.
+
+Blur is an image-space approximation. A mover's box and its contents move together, and glows or shadows outside its box stay sharp. 3D movers are skipped.
+
+## Requirements
+
+Blur draws through Chrome's [HTML in Canvas](/guides/html-in-canvas) API.
+
+- **Renders** use the render browser, which HyperFrames launches with the API enabled.
+- **Studio preview** uses your own browser. We saw Chrome 157 and 158 expose the API without a flag, but only in headless and Chrome-for-Testing builds; whether it ships in stable Chrome is unverified. Chrome 155 and earlier need `chrome://flags/#html-in-canvas`. Preview detects the API and plays sharp when it is missing, so check your own browser rather than relying on a version number.
+
+If Studio's browser cannot blur, Studio tells the render, and the render also skips blur so the output matches what you saw.
+
+## When blur turns itself off
+
+html-in-canvas captures a few things wrongly. A wrongly blurred frame is worse than a sharp one, so when HyperFrames finds one of these it turns blur off **for the whole composition, from the first frame**, instead of switching mid-render. This covers every defect the timeline scan can see. A defect the scan misses (a WebGL canvas added late, a root shake between scan samples, a face that flips hidden briefly) is caught per frame instead: that one frame renders sharp, blur resumes on the next, and the count is reported as `failedFrames`.
+
+| Found in the composition | Why |
+| --- | --- |
+| A WebGL or WebGPU canvas anywhere in the document | Captured frozen. |
+| `backface-visibility: hidden` inside a 3D context (including from an animation) | Drawn mirrored. |
+| A transform on the root element | Ignored by the capture. |
+| Opacity below 1, or `mix-blend-mode`, on the root element | Not applied by the capture. |
+| An `iframe`, `object`, `embed` or custom element in the root | Not captured faithfully. |
+| A nested capture canvas, such as a VFX block | Hangs the renderer. |
+| An HDR render | The HDR compositor's layer mask does not reach the blur canvases. |
+| A distributed render | Chunks cannot share the single-page capture. |
+
+Large see-through movers (a full-frame translucent sweep, say) are skipped too, because blurring them would drag the content underneath along. Their fast children still blur.
+
+### Find out why it is off
+
+```bash
+npx hyperframes check
+```
+
+| Finding | Severity | Meaning |
+| --- | --- | --- |
+| `motion_blur_off` | warning | Blur is on but was switched off. The message names the cause and a fix. |
+| `motion_blur_no_movers` | info | Blur is on but nothing moves fast enough to blur. |
+| `motion_blur_unverified` | info | The check could not confirm blur in this browser. |
+
+In the page, `window.__hfMotionBlur.report()` returns `state`, `reason`, `reasonCode` and `movers`. A render also logs one line per session saying whether blur ran and why not, plus a session-end line when any frames fell back to sharp (`failedFrames > 0`).
+
+## Cost and limits
+
+- **Render time.** About 1.7× for a blurred composition (median over 20 real compositions). Compositions where blur is off or nothing moves add only the one-time discovery scan (tens of milliseconds on a 25-mover composition).
+- **Editing.** The root is wrapped in the capture canvas only while playing or rendering. Paused, it is plain DOM, so click-to-select in Studio works as usual.
+- **Preview rate.** Blurred preview can run at half the frame rate on heavy compositions.
+- **Video.** A `<video>` drawn through the capture looks about 2–3% darker in Studio preview than in normal playback. Renders are not affected.
+- **Worker count.** Output is not bit-identical between worker counts (around 60 dB PSNR), about the size of the difference chunking already causes.
+- **Not handled.** Pose errors under CSS `zoom`, `position: fixed` and `foreignObject`; a very short Web Animations API animation that falls between scan samples; movers made see-through only by CSS backgrounds, masks or `clip-path`.
diff --git a/skills-manifest.json b/skills-manifest.json
index 5306b057ac..81cd98aec9 100644
--- a/skills-manifest.json
+++ b/skills-manifest.json
@@ -6,7 +6,7 @@
"files": 2
},
"hyperframes": {
- "hash": "bf9e65d52f3ffdd6",
+ "hash": "66d328f5c449b403",
"files": 77
},
"hyperframes-cli": {
diff --git a/skills/hyperframes/references/motion.md b/skills/hyperframes/references/motion.md
index 7595681835..9bea1e6dbb 100644
--- a/skills/hyperframes/references/motion.md
+++ b/skills/hyperframes/references/motion.md
@@ -5,6 +5,7 @@
Measured frame by frame from the official HyperFrames launch films. These are defaults: a reference the person gave, or a Moment that does otherwise on purpose, wins for its own beat.
- **Moves**: a fast move takes 0.3–0.6 s and carries motion blur on its own ease, peaking at its fastest frame: 6–12 px on text-sized elements, 15–20 px full-frame, horizontal-only on a horizontal move. One move is one tween.
+- **Render-time blur**: for fast 2D movers, `data-motion-blur="on"` on the composition root smears them along their real path in preview and render (opt-in; also `data-motion-blur-shutter`, `-samples`, `-events="on"` for callback-driven motion). Suggest it when the person asks for blur or a filmic look and the piece moves fast; skip it when the composition has a WebGL canvas, a 3D flip with `backface-visibility`, a root transform or opacity, or an HDR render, because blur turns itself off there. After adding it run `hyperframes check`: `motion_blur_off` names the cause. About 1.7x render time. Guide: /guides/motion-blur.
- **Arrive slow, leave clean**: long-tailed ease-outs on arrivals; landing takes longer than leaving. An exit is one smooth motion, never slide, stop, then leave. Entrances that are too snappy read as glitches; slowing the whole video by about a second often fixes it.
- **Ease by role**: an arrival lands on a long tail (`expo.out`, `power4.out`), a camera move or a colour flood eases both ways (`power2.inOut`), a zoom through or an exit accelerates (`power3.in`). The same `power2.out` at 0.5 s on everything is the flat default that makes a film feel generated. Linear only for rotation, progress and constant speed that is the point.
- **Springs** are named by damping ratio: 1.0 never bounces, 0.7-0.85 reads premium, 0.4-0.6 playful, under 0.3 a cartoon. Position and size may bounce; opacity and colour never do. GSAP's `elastic.out(1, 0.5)` and `back.out(1.4)` are the nearest built-ins; a closed-form spring of `t` keeps any frame renderable on its own.