A truly modular keyboard
C
journal: boards came, resin printing, flashing and case iterations, rename journal images
Nathan32080912a31c
diff --git a/JOURNAL.md b/JOURNAL.mdindex 755e3a0..3e7e429 100644--- a/JOURNAL.md+++ b/JOURNAL.md@@ -2,6 +2,63 @@This journal is auto generated by Stasis.-->+# 10/20/2026 9 PM - Tinkering With Designs and LED Blink++_Time spent: 8h_++So I have been tinkering with the designs and stuff the past 2 days, mostly the keyword case in onshape. I made a bigger version of the case with holes for the magnets and split it up into an inner part and left and right+side pieces.++**This was the result of many iterations that I had to spend resin printing, curing, sanding / polishing, and then tinkering with the design and making tons of modifications**++this is v12 of the case and its the most overengineered thing ive done, I also got n55 magnets from some sketchy seller so hopefully they hold++++++++++then I put the pcb in to check that the pogo pins and usb line up with everything and yea++++++I also did a section view of the whole thing to check nothing was hitting inside, its currently printing so hopefully it works++++I also got the first firmware on the keyword, its just a blink that cycles the RGB status LED through red, yellow, green, cyan, blue, magenta, white and off every 500ms. The only downside is that i gotta use the swd to flash it bc i changed the boot options aaaaaa++# 10/16-18/2026 5 PM - Resin Printing and Flashing++_Time spent: 14h_++So the boards came! and I learned how to resin print at the makerspace, you print it on the formlabs printer, then wash it in the 2 IPA washes, let it dry and then cure it++++++++++++and I got a bunch of clear prints out of it, v1 had some problems so I still gotta clean up the resin print stuff++++I also got it to flash! It connects to STM32CubeProgrammer over USB DFU even with the usb c going through the pogo pins and yea+++++# 10/2/2026 1 PM - Fixing Board Errors_Time spent: 5h_@@ -30,7 +87,7 @@ _Time spent: 8h_So i did a thing with clay and finished the case andx yea, this took a long time as I had a few revisions and yea ts is finished, i will blender render soon as im macondoing and just wanna shoip this so it arrives druring fallout-+# 4/10/2026 3 AM - More Cad and finished Keybit Case@@ -38,17 +95,17 @@ _Time spent: 7h_So after messing around with a few designs in onshape, I got a better Keycap design-+there are internal holes for the magnets and the thing latches on to the key switches side latches as shown here-+-+i then printed it out and did a thing and got this-+and yea thats basically it, Ill plan on continuing the cad for the main pcb and make it cleaner@@ -58,11 +115,11 @@ _Time spent: 7h_Idk how to cad but I tried to do it and ended with soemthing like this:-+which got printed and it kinda works but the corners are too small and yea-+I printed a few out and showed them to clay and he liked them and yea, altho its thin I plan on making the walls thicker and yea, aside from that I think its pretty much done@@ -72,19 +129,19 @@ _Time spent: 7h_So I kinda want to be able to program the CH300v chips from the main board so I needed to add in some pogo pins and then I would also need flash to store the code so I added that in and updated the STM32 MX for that-+Then after that I finished routing up everything and also replaced the old LED with a RGB one.-+-+Then I updated the schematics to look better and yea-+-+# 4/5/2026 7 PM - Routing@@ -92,11 +149,11 @@ _Time spent: 7h_So I locked in for a day and finished up the routing for both PCB's. I also had to add in some I2C pullup resistors and had fun with laying them out on both sides and yea-+I also did the same for the keybit and ended up with this-+it took me a while as I forgot that I had to add in pullup resistors and then had to move things around to add space for them@@ -106,11 +163,11 @@ _Time spent: 7h_So I had a bunch of back and forth between the 2 different STM32 chips, I oringlaly planned on having eherythign on one boar dbut with bluetooht then that would be way complicated so I decided to go on St's website to try and find any stm32s that would support bluetooth and I found a small one bue that meant using a usb to hid converter but the smallest one I could find would take up half the board so I decided to split the boards, and in doing so I rediecided that if I was going to have more area, I might as well have a bigger stm32 chip and just add more stuff to it so I did that and ended up with this:-+I was still placing the components so I decided to do that some more and got this-+# 3/27/2026 2 AM - Ideation and Schematic@@ -126,9 +183,9 @@ I decided on using a cheap risc-v processor and i2c to communicate between the kI started on the keybit design (ha ha) and got this:-+I then also started on the other design for the keyword-+diff --git a/README.md b/README.mdindex 314927b..38e010a 100644--- a/README.md+++ b/README.md@@ -53,11 +53,11 @@ A single key with a Cherry MX switch and a CH32V003. Every side has pogo pins fo**Schematic:**-<img src="assets/journal/1775426460134-qt999o.png" alt="Keybit Schematic" width="800"/>+<img src="assets/journal/keybit_schematic.png" alt="Keybit Schematic" width="800"/>**Layout:**-<img src="assets/journal/1775416826793-5lrrwe.png" alt="Keybit Layout" width="800"/>+<img src="assets/journal/keybit_routing.png" alt="Keybit Layout" width="800"/>### Keyword@@ -65,28 +65,28 @@ The main board that the keybits connect to. It is split into two PCBs that stack**Schematic:**-<img src="assets/journal/1775426515419-d7ntz6.png" alt="Keyword Schematic" width="800"/>+<img src="assets/journal/keyword_schematic.png" alt="Keyword Schematic" width="800"/>**Layout:**-<img src="assets/journal/1775347277075-v4u04k.png" alt="Keyword Layout" width="800"/>+<img src="assets/journal/keyword_routing.png" alt="Keyword Layout" width="800"/>**3D View:**-<img src="assets/journal/1775426542816-taq9ky.png" alt="Keyword 3D View" width="800"/>-<img src="assets/journal/1775426579651-lg5zme.png" alt="Keyword 3D View" width="800"/>+<img src="assets/journal/keyword_3d_view.png" alt="Keyword 3D View" width="800"/>+<img src="assets/journal/keyword_3d_view_2.png" alt="Keyword 3D View" width="800"/>## Case and KeycapsCustom designed cases and keycaps in OnShape, the STEP files are in the [`cad`](cad) folder.-<img src="assets/journal/1781815993601-r86dm5.png" alt="Case" width="800"/>+<img src="assets/journal/final_case.png" alt="Case" width="800"/>The keycaps have internal holes for the magnets and latch on to the side latches of the key switch.-<img src="assets/journal/1775792561658-u0t4fh.png" alt="Keycap Design" width="800"/>-<img src="assets/journal/1775792667844-tdun0b.png" alt="Keycap Latch" width="800"/>-<img src="assets/journal/1775793071456-4ktbyd.png" alt="Printed Keycap" width="400"/>+<img src="assets/journal/keycap_design.png" alt="Keycap Design" width="800"/>+<img src="assets/journal/keycap_latch.png" alt="Keycap Latch" width="800"/>+<img src="assets/journal/printed_keycap.png" alt="Printed Keycap" width="400"/>## Creditsdiff --git a/assets/journal/boards_came.jpeg b/assets/journal/boards_came.jpegnew file mode 100644index 0000000..44cb556Binary files /dev/null and b/assets/journal/boards_came.jpeg differdiff --git a/assets/journal/boards_came_2.jpeg b/assets/journal/boards_came_2.jpegnew file mode 100644index 0000000..3010fe3Binary files /dev/null and b/assets/journal/boards_came_2.jpeg differdiff --git a/assets/journal/dfu_programmer.jpeg b/assets/journal/dfu_programmer.jpegnew file mode 100644index 0000000..7e4aa46Binary files /dev/null and b/assets/journal/dfu_programmer.jpeg differdiff --git a/assets/journal/dfu_programmer_2.jpeg b/assets/journal/dfu_programmer_2.jpegnew file mode 100644index 0000000..382ca4bBinary files /dev/null and b/assets/journal/dfu_programmer_2.jpeg differdiff --git a/assets/journal/1781815993601-r86dm5.png b/assets/journal/final_case.pngsimilarity index 100%rename from assets/journal/1781815993601-r86dm5.pngrename to assets/journal/final_case.pngdiff --git a/assets/journal/1775447209619-5e1ha0.png b/assets/journal/first_case_cad.pngsimilarity index 100%rename from assets/journal/1775447209619-5e1ha0.pngrename to assets/journal/first_case_cad.pngdiff --git a/assets/journal/1775447251699-e0oyw0.png b/assets/journal/first_case_print.pngsimilarity index 100%rename from assets/journal/1775447251699-e0oyw0.pngrename to assets/journal/first_case_print.pngdiff --git a/assets/journal/1775416826793-5lrrwe.png b/assets/journal/keybit_routing.pngsimilarity index 100%rename from assets/journal/1775416826793-5lrrwe.pngrename to assets/journal/keybit_routing.pngdiff --git a/assets/journal/1775426460134-qt999o.png b/assets/journal/keybit_schematic.pngsimilarity index 100%rename from assets/journal/1775426460134-qt999o.pngrename to assets/journal/keybit_schematic.pngdiff --git a/assets/journal/1774578078192-fmrf1k.png b/assets/journal/keybit_schematic_v1.pngsimilarity index 100%rename from assets/journal/1774578078192-fmrf1k.pngrename to assets/journal/keybit_schematic_v1.pngdiff --git a/assets/journal/keybytes_section_view.png b/assets/journal/keybytes_section_view.pngnew file mode 100644index 0000000..aa46d1eBinary files /dev/null and b/assets/journal/keybytes_section_view.png differdiff --git a/assets/journal/1775792934823-axlxi9.png b/assets/journal/keycap_bottom.pngsimilarity index 100%rename from assets/journal/1775792934823-axlxi9.pngrename to assets/journal/keycap_bottom.pngdiff --git a/assets/journal/1775792561658-u0t4fh.png b/assets/journal/keycap_design.pngsimilarity index 100%rename from assets/journal/1775792561658-u0t4fh.pngrename to assets/journal/keycap_design.pngdiff --git a/assets/journal/1775792667844-tdun0b.png b/assets/journal/keycap_latch.pngsimilarity index 100%rename from assets/journal/1775792667844-tdun0b.pngrename to assets/journal/keycap_latch.pngdiff --git a/assets/journal/1775426542816-taq9ky.png b/assets/journal/keyword_3d_view.pngsimilarity index 100%rename from assets/journal/1775426542816-taq9ky.pngrename to assets/journal/keyword_3d_view.pngdiff --git a/assets/journal/1775426579651-lg5zme.png b/assets/journal/keyword_3d_view_2.pngsimilarity index 100%rename from assets/journal/1775426579651-lg5zme.pngrename to assets/journal/keyword_3d_view_2.pngdiff --git a/assets/journal/keyword_assembly_pogo.png b/assets/journal/keyword_assembly_pogo.pngnew file mode 100644index 0000000..01d6e4cBinary files /dev/null and b/assets/journal/keyword_assembly_pogo.png differdiff --git a/assets/journal/keyword_case_big.png b/assets/journal/keyword_case_big.pngnew file mode 100644index 0000000..922f1f6Binary files /dev/null and b/assets/journal/keyword_case_big.png differdiff --git a/assets/journal/keyword_case_inner.png b/assets/journal/keyword_case_inner.pngnew file mode 100644index 0000000..b1f77a6Binary files /dev/null and b/assets/journal/keyword_case_inner.png differdiff --git a/assets/journal/keyword_case_sketch.png b/assets/journal/keyword_case_sketch.pngnew file mode 100644index 0000000..758d95bBinary files /dev/null and b/assets/journal/keyword_case_sketch.png differdiff --git a/assets/journal/keyword_case_with_pcb.png b/assets/journal/keyword_case_with_pcb.pngnew file mode 100644index 0000000..32a2204Binary files /dev/null and b/assets/journal/keyword_case_with_pcb.png differdiff --git a/assets/journal/1775419082878-wwvq7s.png b/assets/journal/keyword_cubemx_quadspi.pngsimilarity index 100%rename from assets/journal/1775419082878-wwvq7s.pngrename to assets/journal/keyword_cubemx_quadspi.pngdiff --git a/assets/journal/1774761472182-pa7dar.png b/assets/journal/keyword_placement.pngsimilarity index 100%rename from assets/journal/1774761472182-pa7dar.pngrename to assets/journal/keyword_placement.pngdiff --git a/assets/journal/1775347199014-2i36z5.png b/assets/journal/keyword_placement_2.pngsimilarity index 100%rename from assets/journal/1775347199014-2i36z5.pngrename to assets/journal/keyword_placement_2.pngdiff --git a/assets/journal/1775347277075-v4u04k.png b/assets/journal/keyword_routing.pngsimilarity index 100%rename from assets/journal/1775347277075-v4u04k.pngrename to assets/journal/keyword_routing.pngdiff --git a/assets/journal/1775426515419-d7ntz6.png b/assets/journal/keyword_schematic.pngsimilarity index 100%rename from assets/journal/1775426515419-d7ntz6.pngrename to assets/journal/keyword_schematic.pngdiff --git a/assets/journal/1774578096201-ez05dt.png b/assets/journal/keyword_schematic_v1.pngsimilarity index 100%rename from assets/journal/1774578096201-ez05dt.pngrename to assets/journal/keyword_schematic_v1.pngdiff --git a/assets/journal/n55_magnets.jpeg b/assets/journal/n55_magnets.jpegnew file mode 100644index 0000000..3114172Binary files /dev/null and b/assets/journal/n55_magnets.jpeg differdiff --git a/assets/journal/1775793071456-4ktbyd.png b/assets/journal/printed_keycap.pngsimilarity index 100%rename from assets/journal/1775793071456-4ktbyd.pngrename to assets/journal/printed_keycap.pngdiff --git a/assets/journal/resin_curing.jpeg b/assets/journal/resin_curing.jpegnew file mode 100644index 0000000..3a65ba6Binary files /dev/null and b/assets/journal/resin_curing.jpeg differdiff --git a/assets/journal/resin_printer.jpeg b/assets/journal/resin_printer.jpegnew file mode 100644index 0000000..a260dc9Binary files /dev/null and b/assets/journal/resin_printer.jpeg differdiff --git a/assets/journal/resin_prints.jpeg b/assets/journal/resin_prints.jpegnew file mode 100644index 0000000..df4d142Binary files /dev/null and b/assets/journal/resin_prints.jpeg differdiff --git a/assets/journal/resin_station.jpeg b/assets/journal/resin_station.jpegnew file mode 100644index 0000000..8bdc1c6Binary files /dev/null and b/assets/journal/resin_station.jpeg differdiff --git a/hardware/keyword/~keyword.kicad_pcb.lck b/hardware/keyword/~keyword.kicad_pcb.lckdeleted file mode 100644index 46b8a91..0000000--- a/hardware/keyword/~keyword.kicad_pcb.lck+++ /dev/null@@ -1 +0,0 @@-{"hostname":"Terrabook","username":"roomba"}\ No newline at end of filediff --git a/hardware/keyword/~keyword.kicad_pro.lck b/hardware/keyword/~keyword.kicad_pro.lckdeleted file mode 100644index 46b8a91..0000000--- a/hardware/keyword/~keyword.kicad_pro.lck+++ /dev/null@@ -1 +0,0 @@-{"hostname":"Terrabook","username":"roomba"}\ No newline at end of file