A truly modular keyboard
C
fixes
Nathan3c0520f0a6e4
diff --git a/BOM.csv b/BOM.csvindex f8f46a4..2b15c08 100644--- a/BOM.csv+++ b/BOM.csv@@ -1,8 +1,8 @@Item,Price,SourceMagnets 2x0.5mm (1000pcs),8.83,https://es.aliexpress.com/item/1005009461785489.html-Keybit PCB (5pcs, Black ENIG),19.38,https://jlcpcb.com-Keybit PCBA (5pcs, bottom side),69.29,https://jlcpcb.com-Keyword PCB (5pcs, White ENIG),30.34,https://jlcpcb.com-Keyword PCBA (2pcs, both sides),205.63,https://jlcpcb.com+Keybit PCB (5pcs, Black HASL),2.00,https://jlcpcb.com+Keybit PCBA (5pcs, bottom side),69.67,https://jlcpcb.com+Keyword PCB (5pcs, White ENIG),30.50,https://jlcpcb.com+Keyword PCBA (2pcs, both sides),203.60,https://jlcpcb.comJLCPCB Shipping,158.17,https://jlcpcb.com-Total,491.64,+Total,472.77,diff --git a/JOURNAL.md b/JOURNAL.mdindex 1ed283e..755e3a0 100644--- a/JOURNAL.md+++ b/JOURNAL.md@@ -16,12 +16,12 @@ the biggest one was on the keybit, one of the pogo header GND pads wasnt connecton the keyword a bunch of the resistors all had the same lcsc number which was a 150 ohm resistor with 0 stock so jlc would have put the wrong values on the charger so i cleared those, and the pads that the pogo pins land on were in the bom as pogo pins so I set them to dnp-I also fixed all the library and 3d model paths since they were hardcoded to my windows pc and didnt work on the mac, now they are relative to the project. Then I added the jlcpcb order and shipping to the bom+-+++I also fixed all the library and 3d model paths since they were hardcoded to my windows pc and didnt work on the mac, now they are relative to the project. Then I added the jlcpcb order and shipping to the bom--# 6/18/2026 8 PM - Finish CAD@@ -32,47 +32,32 @@ So i did a thing with clay and finished the case andx yea, this took a long time--# 4/10/2026 3 AM - More Cad and finished Keybit Case_Time spent: 7h_So after messing around with a few designs in onshape, I got a better Keycap design--there are internal holes for the magnets and the thing latches on to the key switches side latches as shown here---i then printed it out and did a thing and got this--and yea thats basically it, Ill plan on continuing the cad for the main pcb and make it cleaner-----# 4/8/2026 12 AM - CAD + Case_Time spent: 7h_Idk how to cad but I tried to do it and ended with soemthing like this:-which got printed and it kinda works but the corners are too small and yea@@ -81,39 +66,24 @@ which got printed and it kinda works but the corners are too small and yeaI printed a few out and showed them to clay and he liked them and yea, altho its thin I plan on making the walls thicker and yea, aside from that I think its pretty much done---# 4/6/2026 3 AM - Flash and LED and Touchups_Time spent: 7h_So I kinda want to be able to program the CH300v chips from the main board so I needed to add in some pogo pins and then I would also need flash to store the code so I added that in and updated the STM32 MX for that----Then after that I finished routing up everything and also replaced the old LED with a RGB one.-Then I updated the schematics to look better and yea-------# 4/5/2026 7 PM - Routing@@ -122,37 +92,24 @@ _Time spent: 7h_So I locked in for a day and finished up the routing for both PCB's. I also had to add in some I2C pullup resistors and had fun with laying them out on both sides and yea-I also did the same for the keybit and ended up with this-it took me a while as I forgot that I had to add in pullup resistors and then had to move things around to add space for them---# 4/5/2026 12 AM - Keyword and Routing_Time spent: 7h_So I had a bunch of back and forth between the 2 different STM32 chips, I oringlaly planned on having eherythign on one boar dbut with bluetooht then that would be way complicated so I decided to go on St's website to try and find any stm32s that would support bluetooth and I found a small one bue that meant using a usb to hid converter but the smallest one I could find would take up half the board so I decided to split the boards, and in doing so I rediecided that if I was going to have more area, I might as well have a bigger stm32 chip and just add more stuff to it so I did that and ended up with this:-I was still placing the components so I decided to do that some more and got this-------# 3/27/2026 2 AM - Ideation and Schematic@@ -169,15 +126,9 @@ I decided on using a cheap risc-v processor and i2c to communicate between the kI started on the keybit design (ha ha) and got this:--I then also started on the other design for the keyword----diff --git a/assets/jlcpcb_order.png b/assets/jlcpcb_order.pngindex aeab7ef..c413507 100644Binary files a/assets/jlcpcb_order.png and b/assets/jlcpcb_order.png differdiff --git a/assets/journal/jlcpcb_order.png b/assets/journal/jlcpcb_order.pngindex aeab7ef..c413507 100644Binary files a/assets/journal/jlcpcb_order.png and b/assets/journal/jlcpcb_order.png differdiff --git a/assets/journal/keyword_fixed_bottom.png b/assets/journal/keyword_fixed_bottom.pngnew file mode 100644index 0000000..023df9bBinary files /dev/null and b/assets/journal/keyword_fixed_bottom.png differdiff --git a/assets/journal/keyword_fixed_top.png b/assets/journal/keyword_fixed_top.pngnew file mode 100644index 0000000..940676cBinary files /dev/null and b/assets/journal/keyword_fixed_top.png differdiff --git a/hardware/keybit/keybit.kicad_prl b/hardware/keybit/keybit.kicad_prlindex bd739b8..f5161b2 100644--- a/hardware/keybit/keybit.kicad_prl+++ b/hardware/keybit/keybit.kicad_prl@@ -1,6 +1,6 @@{"board": {- "active_layer": 2,+ "active_layer": 0,"active_layer_preset": "","auto_track_width": true,"hidden_netclasses": [],diff --git a/hardware/keybit/~keybit.kicad_pcb.lck b/hardware/keyword/~keyword.kicad_pcb.lcksimilarity index 100%rename from hardware/keybit/~keybit.kicad_pcb.lckrename to hardware/keyword/~keyword.kicad_pcb.lckdiff --git a/hardware/keybit/~keybit.kicad_pro.lck b/hardware/keyword/~keyword.kicad_pro.lcksimilarity index 100%rename from hardware/keybit/~keybit.kicad_pro.lckrename to hardware/keyword/~keyword.kicad_pro.lck