Skip to content

A truly modular keyboard

C

journal: magnets falling out photo on oct 21

Nathan7e76bbebc3a1
diff --git a/JOURNAL.md b/JOURNAL.md
index ff65406..b771923 100644
--- a/JOURNAL.md
+++ b/JOURNAL.md
@@ -58,7 +58,11 @@ For J7 I made the magnets stick out 0.75mm so theyre the length of the pogo pins
_Time spent: 3h_
-So after the first magnet cases I noticed the magnets werent strong enough to hold the modules together against the pogo pins. I spent some time looking on digikey for single right angle pogo pins with a low enough spring force that a 4mm x 1mm N52 magnet could hold it. The closest thing was the Mill-Max 0967 horizontal SMT pins with the low force springs, but they need a different footprint so I would have to redo the boards, so I decided to make the magnets stronger instead.
+So after the first magnet cases I noticed the magnets werent strong enough to hold the modules together against the pogo pins. I also tried putting the magnets into the pockets and sometimes they just wouldnt stick and would fall out.
+
+![image](assets/journal/magnet_falling_out.png)
+
+I spent some time looking on digikey for single right angle pogo pins with a low enough spring force that a 4mm x 1mm N52 magnet could hold it. The closest thing was the Mill-Max 0967 horizontal SMT pins with the low force springs, but they need a different footprint so I would have to redo the boards, so I decided to make the magnets stronger instead.
# 10/20/2026 9 PM - Tinkering With Designs and LED Blink
diff --git a/assets/journal/magnet_falling_out.png b/assets/journal/magnet_falling_out.png
new file mode 100644
index 0000000..86e7ac6
Binary files /dev/null and b/assets/journal/magnet_falling_out.png differ