A truly modular keyboard
C
keyword: I2CSCAN and I2CRD serial commands for the side bus
Nathan9e968c246b96
diff --git a/firmware/keyword/Core/Src/proto.c b/firmware/keyword/Core/Src/proto.cindex 6b6488a..44257e0 100644--- a/firmware/keyword/Core/Src/proto.c+++ b/firmware/keyword/Core/Src/proto.c@@ -10,6 +10,8 @@#include "bootcfg.h"#include "proto.h"#include "main.h"++extern I2C_HandleTypeDef hi2c3; /* the side bus */#include "ch32v003_swio.h"/* Optional features the desktop app can use, only what's implemented.@@ -353,6 +355,33 @@ static void Handle_Line(proto_port_t *port, char *cmd)for (size_t o = 0, l = strlen(buf); o < l || o == 0; o += 100)Reply(port, "DOCKID%s %.100s", o ? "+" : "", buf + o);}+ else if (strcmp(cmd, "I2CSCAN") == 0)+ {+ /* Every 7-bit address that ACKs on the side bus, and the idle line levels. */+ char list[100];+ int n = 0;+ list[0] = 0;+ for (uint8_t ad = 0x08; ad <= 0x77; ad++)+ if (HAL_I2C_IsDeviceReady(&hi2c3, (uint16_t)(ad << 1), 1, 10) == HAL_OK && n < (int)sizeof(list) - 4)+ n += snprintf(list + n, sizeof(list) - n, " %02x", ad);+ Reply(port, "I2CSCAN sda=%d scl=%d acks:%s", HAL_GPIO_ReadPin(GPIOB, GPIO_PIN_14) == GPIO_PIN_SET,+ HAL_GPIO_ReadPin(GPIOB, GPIO_PIN_13) == GPIO_PIN_SET, n ? list : " none");+ }+ else if (strcmp(cmd, "I2CRD") == 0)+ {+ /* I2CRD <addr hex> <reg hex> <n>: raw register read on the side bus. */+ unsigned ad = 0, reg = 0, cnt = 0;+ uint8_t buf[16];+ if (sscanf(args, "%x %x %u", &ad, ®, &cnt) != 3 || cnt == 0 || cnt > sizeof(buf))+ Reply(port, "ERR usage: I2CRD <addr hex> <reg hex> <n 1-16>");+ else if (HAL_I2C_Mem_Read(&hi2c3, (uint16_t)(ad << 1), (uint16_t)reg, I2C_MEMADD_SIZE_8BIT, buf, (uint16_t)cnt, 10) != HAL_OK)+ Reply(port, "I2CRD %02x %02x err=%08lx", ad, reg, (unsigned long)HAL_I2C_GetError(&hi2c3));+ else {+ char hex[3 * 16 + 1];+ for (unsigned i = 0; i < cnt; i++) snprintf(hex + 3 * i, 4, " %02x", buf[i]);+ Reply(port, "I2CRD %02x %02x:%s", ad, reg, hex);+ }+ }else if (strcmp(cmd, "SIDES?") == 0){int n;