Skip to content

LightCraft: An open-source non-destructive photo editor written by scratch in pure Rust

Merge PR #900

Claude3ac2b21d9e2b
diff --cc docs/gaps.md
index a0c244675,5a632fd15..705a09ded
--- a/docs/gaps.md
+++ b/docs/gaps.md
@@@ -1,6 -1,6 +1,6 @@@
# Gaps: where LightCraft falls short of Lightroom
- > **Last reviewed:** 2026-10-11 · **Last updated:** 2026-10-11 · **Change:** minor (CR3 entry names the EOS R7 C-RAW fix and the refused CRX variants; CI and Windows / Linux entries note the 0.6.0 riscv64 build; camera colour: tone curve from black-and-white camera JPEGs) · **Target:** Adobe Lightroom Classic 15.5 / Lightroom 9.6
-> **Last reviewed:** 2026-10-10 · **Last updated:** 2026-10-11 · **Change:** minor (Compare and Reference get sharp zoom windows; gap 4 shrinks) · **Target:** Adobe Lightroom Classic 15.5 / Lightroom 9.6
++> **Last reviewed:** 2026-10-11 · **Last updated:** 2026-10-11 · **Change:** minor (CR3 entry names the EOS R7 C-RAW fix and the refused CRX variants; CI and Windows / Linux entries note the 0.6.0 riscv64 build; camera colour: tone curve from black-and-white camera JPEGs; Compare and Reference get sharp zoom windows; gap 4 shrinks) · **Target:** Adobe Lightroom Classic 15.5 / Lightroom 9.6
Every known shortfall, one entry each, ranked by user impact (how many Lightroom users hit it, and
how hard it blocks them), then by effort. **Agents pick work from the top** (the first entry nobody is
@@@ -15,10 -15,10 +15,10 @@@ Hours are Opus 5.5 agent wall-clock hou
| # | Gap | Evidence | User impact | Hours | Doc |
|---:|---|---|---|---:|---|
-| 1 B | **Camera colour is estimated, not measured** (LR-PROF-CAMERACOLOR). Raws start from a per-file fit to the camera JPEG, 4 bundled profiles or 52 spectral matrices; others use a neutral matrix | ΔE vs camera JPEG 2.9–10 after fitting (raw-parity.md); 0 chart-calibrated models vs 1,500 Adobe Standard profiles | every raw shooter sees colour that is close but not Lightroom's; some get neutral-matrix colour | 50–90 | [raw-parity](raw-parity.md#colour) |
-| 2 B | **CR3 beyond three verified bodies** (LR-IMP-FORMATS): CRX variants other than those verified on M50 / R100 / R8 fall back to the preview; CR3 sRAW / mRAW and HEIF CR3 too | measured: Canon is the largest bucket (33% of photographers) and its share whose camera fully works is the lowest of the big four, 72%; 17 of 22 popular Canon bodies write CR3, 2 verified (raw-parity.md) | +6.5 points of photographers whose camera works, the biggest single raw gain | 25–45 | [raw-parity](raw-parity.md#remaining-work-ranked-by-photographers-unlocked-per-hour) |
+| 1 B | **Camera colour is estimated, not measured** (LR-PROF-CAMERACOLOR). Raws start from a per-file fit to the camera JPEG, 4 bundled profiles or 52 spectral matrices; others use a neutral matrix (a black-and-white camera JPEG gives its tone curve only, #577) | ΔE vs camera JPEG 2.9–10 after fitting (raw-parity.md); 0 chart-calibrated models vs 1,500 Adobe Standard profiles | every raw shooter sees colour that is close but not Lightroom's; some get neutral-matrix colour | 50–90 | [raw-parity](raw-parity.md#colour) |
+| 2 B | **CR3 beyond three verified bodies** (LR-IMP-FORMATS): `crx.rs` refuses vertical-tile C-RAW, partial-subband and other plane coding, multi-tile 0x200 and adaptive low-frequency gains, and those files fall back to the preview; CR3 sRAW / mRAW and HEIF CR3 too. EOS R7 C-RAW (odd-height QP map) decodes since a45c2b66 and R6 Mark II C-RAW is reported working on 0.6.0, but neither is verified yet (no corpus test or recorded check) | measured: Canon is the largest bucket (33% of photographers) and its share whose camera fully works is the lowest of the big four, 72%; 17 of 22 popular Canon bodies write CR3, 2 verified (raw-parity.md); R7 rule checked only on paired RAW / C-RAW captures ([cr3.md](cr3.md)) | +6.5 points of photographers whose camera works, the biggest single raw gain | 25–45 | [raw-parity](raw-parity.md#remaining-work-ranked-by-photographers-unlocked-per-hour) |
| 3 B | **Render fidelity unmeasured** (LR-BEHAV-RENDER-FIDELITY): tone, highlights, texture / clarity / dehaze, NR and sharpening are tuned by eye | no side-by-side suite; a retune needs a new process version (only V1 exists) | edits imported from Lightroom look different; the look "isn't Lightroom's" | 30–60 | [raw-parity](raw-parity.md), [process-versions](process-versions.md) |
- | 4 B | **Original-pixel detail at 100%** (LR-VIEW-ZOOM, P0): the whole-image preview is capped (2,560 px default); compare, overlays and soft proofing lack sharp zoom windows (#323) | checklist row 🟡 | checking focus, the first thing culling needs, isn't reliable on large files | 8–15 | [ui-parity](ui-parity.md) |
+ | 4 B | **Original-pixel detail at 100%** (LR-VIEW-ZOOM, P0): Detail, Before/After, Compare and Reference are sharp at 1:1–8:1 (zoom windows, #323). Mask overlays and soft proofing still render the whole frame at the drawn size instead of a window: sharp up to the GPU texture side, but a full-size render per edit at 1:1 | checklist row 🟡 | editing with a mask overlay or soft proof on at 1:1 is slow on large files, and blurry past the texture side | 4–8 | [ui-parity](ui-parity.md) |
| 5 B | **AI masks: Subject, Sky, People, Background, Landscape** are heuristics; Object / Describe run SAM 3 but its download has no mirror configured | `crates/segment`; ai-masks.md; MASK rows 67% | masking is how most Lightroom users edit today | 40–70 + model decision | [target-app-parity](target-app-parity.md#ai) |
| 6 B | **Compressed ORF** (every Olympus / OM body since ~2008) | measured: 66 of 78 Olympus / OM models preview-only; `orf.rs` refuses; OM bucket 3% of photographers, 3% of them fully work | +2.6 points; best gain per hour of any raw gap (~0.2) | 8–15 | [raw-parity](raw-parity.md) |
| 7 | **Nikon High Efficiency NEF** (HE / HE★ on Z 8, Z 9, Z 6III, Z f, Z50II, Z5II when set to HE) | named and preview only (#193); needs a pure-Rust JPEG XS decoder | +1.1 points (only shots taken in HE; lossless works on the same bodies); low gain per hour (~0.04), so not a beta blocker | 20–40 | [raw-parity](raw-parity.md) |
@@@ -72,8 -72,7 +72,9 @@@ Beta-blocking gaps (B) total **~230–4
| Date | Change | Summary |
|---|---|---|
+| 2026-10-11 | minor | Reviewed against main after 0.6.0: CR3 entry names the CRX variants `crx.rs` still refuses and the R7 / R6 Mark II C-RAW state (decoding, not verified, so the measured numbers don't move); CI and Windows / Linux entries note the riscv64 release build (#844); R7 fix added to Closed recently. Panel docking (UI.9, #869) closes no listed gap |
+| 2026-10-11 | minor | Camera colour entry: raws with a black-and-white camera JPEG take its tone curve (#577); gap not closed |
+ | 2026-10-11 | minor | Gap 4: Compare and Reference views get zoom windows per pane (1:1 was a 2,560 px render magnified); overlays and soft proofing remain, 8–15 h → 4–8 h |
| 2026-10-10 | minor | RAW gaps re-measured model by model (raw-parity.md): CR3, compressed ORF and verification entries carry measured shares; HE NEF no longer a beta blocker (+1.1 points for 20–40 h); verification entry absorbs the cheap per-body fixes (#769, #702, A200 series) |
| 2026-10-10 | minor | Beta total raised to 340–600 h to include the ~92 open core-path user issues |
| 2026-10-10 | major | Created from the checklist's Top gaps (whose items 1–2 had been duplicated by a merge) and ROADMAP's Where we stand; re-ranked; added evidence, impact, hours and beta flags; added platform-CI, lens-database, HE NEF and localization gaps |
diff --cc docs/parity-checklist.md
index 27cb8b83e,8f083f233..040bb5573
--- a/docs/parity-checklist.md
+++ b/docs/parity-checklist.md
@@@ -1,6 -1,6 +1,6 @@@
# Lightroom parity checklist
- > **Last reviewed:** 2026-10-10 · **Last updated:** 2026-10-11 · **Change:** minor (rapid slider entry; LR-PROF-CAMERACOLOR: tone curve from black-and-white camera JPEGs) · **Target:** Adobe Lightroom Classic 15.5 / Lightroom 9.6
-> **Last reviewed:** 2026-10-10 · **Last updated:** 2026-10-11 · **Change:** minor (LR-VIEW-ZOOM, LR-VIEW-COMPARE: Compare and Reference zoom windows) · **Target:** Adobe Lightroom Classic 15.5 / Lightroom 9.6
++> **Last reviewed:** 2026-10-10 · **Last updated:** 2026-10-11 · **Change:** minor (rapid slider entry; LR-PROF-CAMERACOLOR: tone curve from black-and-white camera JPEGs; LR-VIEW-ZOOM, LR-VIEW-COMPARE: Compare and Reference zoom windows) · **Target:** Adobe Lightroom Classic 15.5 / Lightroom 9.6
The measured, row-by-row checklist: one row per Lightroom feature, menu item and shortcut, what we
have and what is missing. It answers *does the feature exist?* (feature breadth). Whether it is good
@@@ -128,10 -128,10 +128,10 @@@ differences and missing bindings are i
| LR-VIEW-EDIT | Edit view | P0 | ✅ | `cmd:panel.edit` | |
| LR-VIEW-FULLSCREEN | Full-screen preview | P1 | ✅ | `cmd:view.fullScreenPreview`, `cmd:view.enterFullScreen` | photo on black, arrows step, Esc exits; ⇧⌘F window full screen |
| LR-VIEW-FILMSTRIP | Filmstrip | P0 | ✅ | `cmd:view.filmstrip`, `crates/ui-egui/src/panels/detail.rs` | the photo context menu on right-click; the mouse wheel scrolls it sideways; it follows the active photo only when that changes (centred if off screen), so a scrolled strip stays put; every selected photo is highlighted, the active one framed in white, as in the grid |
- | LR-VIEW-ZOOM | Zoom & pan | P0 | 🟡 | `cmd:view.zoomFit`, `cmd:view.zoom100`, `cmd:view.zoomIn`, `cmd:view.zoomOut`, `cmd:view.zoomToggle`, `cmd:view.clickZoom`, `cmd:view.navigate`, `crates/ui-egui/src/panels/detail.rs`, `crates/ui-egui/src/headless.rs` | continuous native pinch / modifier-wheel zoom (Fit–800%, anchored under the pointer), two-finger scroll / touch pan with edge limits; Detail (including tools, Before/After and full-screen preview), Compare and Reference; fractional percentages preserve small gestures; image, picker and targeted-adjustment cursors stay steady between gesture events; keyboard steps 25–800 % (not 6–1600 %); Fill in the bottom bar; click / Z / Space eases to the chosen ratio (1:1 default, 2:1, 3:1, 4:1, 8:1). The loupe's cost follows the canvas, not the zoom (issue #323): the whole frame is rendered at about canvas size (at most the 2560 px preview source level unless a larger Preview size is chosen, and never above the GPU's texture side), and once the view is zoomed well past that (more than 25 %) the window on screen is rendered too, cut from a frame of at most the photo's own pixels, so beyond 100 % the GPU magnifies it (`region::plan`, `RenderRequest::window`, `Session::region_job`, `crates/ui-egui/src/region.rs`); 1:1 and 2:1–8:1 are sharp at any photo size. A slider tick takes 7–12 ms on a 1400 × 900 canvas and 11–25 ms on a 2800 × 1700 one at 100 % and 400 % of a 24 MP photo (M1 Max, GPU, `profile_slider_drag`); about 20–25 ms at 100 % on the big canvas is over a 16 ms frame. A continuous pinch holds the render sizes (and the windows there are) until it is quiet. A fit view on a canvas up to about 3200 px (a Retina Mac) never decodes the original; larger displays get a window at fit, which does. Modes that draw another picture over the loupe (mask overlays, soft proofing) and photos whose spots or Auto Mask strokes read too far for one window (only photos longer than 8192 px) render the whole frame at the size it is drawn, as before windows; while a preset or profile is hovered, or over a picture that is not the frame (an unsupported raw's embedded JPEG), the whole frame stays canvas-sized. Before/After (side by side, stacked, `\\` and both wipes) gets the same windows on both sides, clipped to their pane or side of the line. Windows render on the GPU like whole frames (equivalence-tested against the CPU), in the browser build too (windows no wider than its GPU's texture side, at most 3072 px), and are not made while hovering a look, soft-proofing or showing an overlay, nor over a picture that is not the frame (an unsupported raw's embedded JPEG with another crop). No texture is larger than the GPU allows. Spots and Auto Mask brushes work while what a window reads fits one render (8192 px along an axis, 4096 in the browser): the window grows to hold the spot and its source patch, or the dabs near it, and if that would take more (a clone from far away at 8:1) the loupe keeps the whole-frame render instead, and spots with an automatic source pick it from a fixed-size render of the whole frame (so a window's choice can differ from a whole-frame render's, which picks at its own resolution). The wide stages (dehaze, clarity, highlights/shadows base) and Refine Edges on masks read a window margin capped at 768 px; measured on hard-edged blocks that costs at most a few levels at 8:1. the histogram and Navigator come from the whole-frame render |
+ | LR-VIEW-ZOOM | Zoom & pan | P0 | 🟡 | `cmd:view.zoomFit`, `cmd:view.zoom100`, `cmd:view.zoomIn`, `cmd:view.zoomOut`, `cmd:view.zoomToggle`, `cmd:view.clickZoom`, `cmd:view.navigate`, `crates/ui-egui/src/panels/detail.rs`, `crates/ui-egui/src/headless.rs` | continuous native pinch / modifier-wheel zoom (Fit–800%, anchored under the pointer), two-finger scroll / touch pan with edge limits; Detail (including tools, Before/After and full-screen preview), Compare and Reference; fractional percentages preserve small gestures; image, picker and targeted-adjustment cursors stay steady between gesture events; keyboard steps 25–800 % (not 6–1600 %); Fill in the bottom bar; click / Z / Space eases to the chosen ratio (1:1 default, 2:1, 3:1, 4:1, 8:1). The loupe's cost follows the canvas, not the zoom (issue #323): the whole frame is rendered at about canvas size (at most the 2560 px preview source level unless a larger Preview size is chosen, and never above the GPU's texture side), and once the view is zoomed well past that (more than 25 %) the window on screen is rendered too, cut from a frame of at most the photo's own pixels, so beyond 100 % the GPU magnifies it (`region::plan`, `RenderRequest::window`, `Session::region_job`, `crates/ui-egui/src/region.rs`); 1:1 and 2:1–8:1 are sharp at any photo size. A slider tick takes 7–12 ms on a 1400 × 900 canvas and 11–25 ms on a 2800 × 1700 one at 100 % and 400 % of a 24 MP photo (M1 Max, GPU, `profile_slider_drag`); about 20–25 ms at 100 % on the big canvas is over a 16 ms frame. A continuous pinch holds the render sizes (and the windows there are) until it is quiet. A fit view on a canvas up to about 3200 px (a Retina Mac) never decodes the original; larger displays get a window at fit, which does. Modes that draw another picture over the loupe (mask overlays, soft proofing) and photos whose spots or Auto Mask strokes read too far for one window (only photos longer than 8192 px) render the whole frame at the size it is drawn, as before windows; while a preset or profile is hovered, or over a picture that is not the frame (an unsupported raw's embedded JPEG), the whole frame stays canvas-sized. Before/After (side by side, stacked, `\\` and both wipes) gets the same windows on both sides, clipped to their pane or side of the line. Windows render on the GPU like whole frames (equivalence-tested against the CPU), in the browser build too (windows no wider than its GPU's texture side, at most 3072 px), and are not made while hovering a look, soft-proofing or showing an overlay, nor over a picture that is not the frame (an unsupported raw's embedded JPEG with another crop). No texture is larger than the GPU allows. Spots and Auto Mask brushes work while what a window reads fits one render (8192 px along an axis, 4096 in the browser): the window grows to hold the spot and its source patch, or the dabs near it, and if that would take more (a clone from far away at 8:1) the loupe keeps the whole-frame render instead, and spots with an automatic source pick it from a fixed-size render of the whole frame (so a window's choice can differ from a whole-frame render's, which picks at its own resolution). The wide stages (dehaze, clarity, highlights/shadows base) and Refine Edges on masks read a window margin capped at 768 px; measured on hard-edged blocks that costs at most a few levels at 8:1. the histogram and Navigator come from the whole-frame render. Compare and Reference get the same windows, one per pane (`Slot::CompareRegion`, `panels/compare.rs`), over each pane's whole-frame render (at most 2560 px); while either view is open two originals stay decoded (`MediaCache::set_full_capacity`), so one pane's window does not evict the other's source; a pinch, or a slider drag on the active photo in Reference, keeps the windows there are until it ends. Still 🟡: mask overlays and soft proofing have no window (a full-size whole-frame render at 1:1) |
| LR-VIEW-NAVIGATOR | Navigator mini map | P1 | ✅ | `cmd:view.navigator`, `crates/ui-egui/src/panels/detail.rs` | shown while zoomed (bottom right); click/drag pans |
-| LR-VIEW-BEFOREAFTER | Before / after | P0 | ✅ | `cmd:view.showOriginal`, `cmd:view.beforeAfter`, `cmd:view.beforeAfterSplit`, `cmd:view.beforeAfterTopBottom`, `cmd:view.beforeAfterSplitTopBottom`, `cmd:beforeAfter.setBefore`, `cmd:beforeAfter.copyAfterToBefore`, `cmd:beforeAfter.copyBeforeToAfter`, `cmd:beforeAfter.swap`, `cmd:beforeAfter.resetBefore` | all four layouts; before = the import state (defaults + import preset) or a chosen history step / version / the current settings; copy and swap (View → Before/After Settings, History row menu). The chosen before lasts for the session |
-| LR-VIEW-COMPARE | Compare two photos | P1 | ✅ | `cmd:view.compare`, `cmd:compare.swap`, `cmd:compare.makeSelect`, `crates/ui-egui/src/panels/compare.rs` | select / candidate, synced zoom + pan, arrows move the candidate; 1:1 to 8:1 sharp on both sides (zoom windows, see LR-VIEW-ZOOM); no zoom-link toggle |
+| LR-VIEW-BEFOREAFTER | Before / after | P0 | ✅ | `cmd:view.showOriginal`, `cmd:view.beforeAfter`, `cmd:view.beforeAfterSplit`, `cmd:view.beforeAfterTopBottom`, `cmd:view.beforeAfterSplitTopBottom`, `cmd:beforeAfter.setBefore`, `cmd:beforeAfter.copyAfterToBefore`, `cmd:beforeAfter.copyBeforeToAfter`, `cmd:beforeAfter.swap`, `cmd:beforeAfter.resetBefore` | all four layouts; before = the import state (defaults + import preset) or a chosen history step / version / the current settings; copy and swap (View → Before/After Settings, History row menu). The chosen before lasts for the session; in side by side and top / bottom, clicks with the white-balance selector, colour samplers and targeted adjustment work in the Before view too (`crates/ui-egui/src/tests_before_after.rs`). Zoomed in, the side by side and stacked views each stay in their pane, with their labels under it |
- | LR-VIEW-COMPARE | Compare two photos | P1 | ✅ | `cmd:view.compare`, `cmd:compare.swap`, `cmd:compare.makeSelect`, `cmd:compare.set`, `crates/ui-egui/src/panels/compare.rs`, `crates/ui-egui/src/tests_compare.rs` | select / candidate, synced zoom + pan, arrows move the candidate; a filmstrip click puts the photo into the active side (a photo on the other side swaps), so the active photo is always one of the two shown; no zoom-link toggle |
++| LR-VIEW-COMPARE | Compare two photos | P1 | ✅ | `cmd:view.compare`, `cmd:compare.swap`, `cmd:compare.makeSelect`, `cmd:compare.set`, `crates/ui-egui/src/panels/compare.rs`, `crates/ui-egui/src/tests_compare.rs` | select / candidate, synced zoom + pan, arrows move the candidate; a filmstrip click puts the photo into the active side (a photo on the other side swaps), so the active photo is always one of the two shown; 1:1 to 8:1 sharp on both sides (zoom windows, see LR-VIEW-ZOOM); no zoom-link toggle |
| LR-VIEW-SURVEY | Survey view [Classic] | P2 | ✅ | `cmd:view.survey`, `crates/ui-egui/src/panels/compare.rs` | selection tiled (≤ 48), keys act on the active photo, hover × removes |
| LR-VIEW-INFOOVERLAY | Info overlay on the photo | P1 | ✅ | `cmd:view.infoOverlay` | off / file + date + size / exposure + camera; ⌘I cycles (I in full screen; elsewhere I stays the Info panel) |
| LR-VIEW-SLIDESHOW | Slideshow | P2 | ✅ | `cmd:view.slideshow` | View ▸ Slideshow (⌥⌘↩): the photos in view full screen, every 4 s (`interval`), wrapping; Space pauses, ←/→ step, Esc ends |
@@@ -778,7 -776,6 +778,8 @@@ Latin stays upright. Advanced Japanese
| Date | Change | Summary |
|---|---|---|
+| 2026-10-11 | minor | KEY-SLIDER-TYPE: honor immediate Return/Escape and keep typed keys in the value editor; add regression references |
+| 2026-10-11 | minor | LR-PROF-CAMERACOLOR: raws with a black-and-white camera JPEG take its tone curve (issue #577) |
+ | 2026-10-11 | minor | LR-VIEW-ZOOM and LR-VIEW-COMPARE: Compare and Reference are sharp at 1:1 (zoom windows per pane, two originals kept decoded while they are open); statuses unchanged |
| 2026-10-10 | minor | Renamed from `parity.md` (progress-docs standard); Top gaps moved to gaps.md (its duplicated items 1–2 from a bad merge resolved there), shortcut notes moved to ui-parity.md. Rows unchanged; a recount of the rows gives 81.1% of 517 in-scope rows (P0 98.0%, P1 95.1%, P2 46.9%), so the generated summary above is due a `cargo xtask parity --write` |
| 2026-09-30 – 2026-10-10 | — | Rows added and updated with each feature (see `git log -- docs/parity.md docs/parity-checklist.md`) |