Skip to content

LightCraft: An open-source non-destructive photo editor written by scratch in pure Rust

LR-EDIT-AUTO: Lightroom-like Auto, calibrated on Lightroom's Auto results (#318, #209)

Alex Chambers8b9a0200843d
diff --git a/crates/pipeline/src/auto.rs b/crates/pipeline/src/auto.rs
index 3455fff21..59af5fe33 100644
--- a/crates/pipeline/src/auto.rs
+++ b/crates/pipeline/src/auto.rs
@@ -1,4 +1,5 @@
-//! Auto tone and auto white balance (histogram / grey-world statistics on a proxy).
+//! Auto tone (a Lightroom-like recipe, see [`auto_tone`]) and auto white balance (grey-world
+//! statistics on a proxy).
use lightcraft_color::cct::xy_to_temp_tint;
use lightcraft_color::{REC2020, Xy, bradford, luminance_2020};
@@ -21,40 +22,83 @@ pub struct AutoTone {
pub saturation: f64,
}
-fn percentile(sorted: &[f32], q: f32) -> f32 {
- if sorted.is_empty() {
- return 0.0;
+/// Exposure in EV that Auto adds per EV of the scene's log-average luminance (the slope is negative:
+/// darker scenes get more). The slope is Lightroom's: regressing the Exposure its Auto chose on 24
+/// raw photos against our own [`scene_log_mean`] of each gives -0.41 EV/EV (r = -0.92).
+const EXPOSURE_SLOPE: f64 = -0.41;
+/// Exposure for a scene whose log-average luminance is middle grey: fitted, with [`CONTRAST`] and
+/// [`VIBRANCE`], so our renders match Lightroom's Auto results on those photos (see [`auto_tone`]).
+const EXPOSURE_AT_GREY: f64 = -0.58;
+/// Highlights and Shadows are Lightroom's own: the average its Auto chose on the 24 photos (our
+/// sliders aim at the same as its). Freeing them as well matched no better on held-out photos and
+/// left them poorly determined.
+const HIGHLIGHTS: f64 = -66.0;
+const SHADOWS: f64 = 52.0;
+/// Contrast and Vibrance are fitted: our slider scales differ from Lightroom's, and our base tone is
+/// flatter, so Contrast is far above its +6. Whites, Blacks and Saturation stay at 0 (Whites and
+/// Blacks made no difference to the match; Lightroom leaves Saturation at about 0).
+const CONTRAST: f64 = 68.0;
+const VIBRANCE: f64 = 30.0;
+
+/// The scene's log-average luminance under the current white balance, in EV relative to middle grey
+/// (the mean of log2(Y / 0.18) over a 512 px proxy, scene-linear, before any tone curve). Pixels that
+/// aren't finite (a damaged decode) are left out: they get no weight when the proxy is made, and
+/// proxy pixels made only of them are skipped. `None` when no pixel is valid.
+pub fn scene_log_mean(src: &Rgb32f, info: &SourceInfo, s: &DevelopSettings) -> Option<f64> {
+ let (mut clean, mut weight) = (src.clone(), Rgb32f::new(src.width, src.height));
+ let mut any = false;
+ for (p, w) in clean.data.iter_mut().zip(weight.data.iter_mut()) {
+ if p.iter().all(|v| v.is_finite()) {
+ *w = [1.0; 3];
+ any = true;
+ } else {
+ *p = [0.0; 3];
+ }
+ }
+ if !any {
+ return None;
}
- sorted[((sorted.len() - 1) as f32 * q.clamp(0.0, 1.0)) as usize]
+ let fit = |img: &Rgb32f| lightcraft_raster::resample::fit(img, 512, 512, lightcraft_raster::resample::Filter::Box);
+ let (img, weight) = (fit(&clean), fit(&weight));
+ // the mean of the valid pixels under each proxy pixel
+ let kept: Vec<[f32; 3]> = img.data.iter().zip(&weight.data).filter(|(_, w)| w[0] > 1e-6).map(|(p, w)| p.map(|v| v / w[0])).collect();
+ let mut kept = Rgb32f { width: kept.len(), height: 1, data: kept };
+ let base = DevelopSettings { wb: s.wb, ..DevelopSettings::default() };
+ // (white balance is per pixel: the valid pixels can be balanced in a row of their own)
+ crate::local::scene_linear_pre(&mut kept, info, &base);
+ let (mut sum, mut n) = (0f64, 0usize);
+ for c in &kept.data {
+ let ev = (luminance_2020(*c).max(1e-6) / 0.18).log2();
+ if ev.is_finite() {
+ sum += ev as f64;
+ n += 1;
+ }
+ }
+ (n > 0).then(|| sum / n as f64)
}
-/// Compute auto tone values for `src` under the current white balance (ignores current tone values).
+/// Auto settings for `src` under the current white balance (ignores current tone values), aiming at
+/// what Lightroom's Auto does: the Exposure a scene needs follows its log-average luminance
+/// ([`scene_log_mean`], scene-linear, so the rule doesn't depend on the base tone curve), and the
+/// other sliders are one fixed recipe. Calibrated black-box against Lightroom's observed behaviour
+/// (the values its Auto chose and its exported results) on 24 Sony raw photos, of which 16 have a
+/// starting look that Sony's in-camera DRO doesn't brighten. Held out one photo at a time, those 16
+/// come out at a median dE76 of 6.4 from Lightroom's Auto results (8.3 unedited; 18.8 with the
+/// previous percentile rule, which ended about 16 L* too bright); all 24 at 7.7 (7.9 unedited).
+/// Rendered sources (JPEGs) are already toned, so their log-average reads brighter and Auto changes
+/// their exposure less. A source without a single valid pixel gets Exposure 0 (and the rest of the
+/// recipe).
pub fn auto_tone(src: &Rgb32f, info: &SourceInfo, s: &DevelopSettings) -> AutoTone {
- let mut img = lightcraft_raster::resample::fit(src, 512, 512, lightcraft_raster::resample::Filter::Box);
- let mut base = DevelopSettings { wb: s.wb, ..DevelopSettings::default() };
- base.light.exposure = 0.0;
- crate::local::scene_linear_pre(&mut img, info, &base);
- let mut ev: Vec<f32> = img.data.iter().map(|c| (luminance_2020(*c).max(1e-6) / 0.18).log2()).collect();
- ev.sort_by(|a, b| a.total_cmp(b));
- let median = percentile(&ev, 0.5);
- let exposure = (-median * 0.85 - 0.1).clamp(-4.0, 4.0);
- let (p01, p05, p95, p995) =
- (percentile(&ev, 0.01) + exposure, percentile(&ev, 0.05) + exposure, percentile(&ev, 0.95) + exposure, percentile(&ev, 0.995) + exposure);
- let highlights = if p995 > 2.2 { -((p995 - 2.2) * 38.0).min(90.0) } else { 0.0 };
- let shadows = if p05 < -4.0 { ((-4.0 - p05) * 22.0).min(70.0) } else { 0.0 };
- let spread = p95 - p05;
- let contrast = ((6.5 - spread) * 6.0).clamp(-20.0, 30.0);
- let whites = if p995 < 1.8 { ((1.8 - p995) * 25.0).min(40.0) } else { -((p995 - 3.5).max(0.0) * 10.0).min(30.0) };
- let blacks = if p01 > -5.0 { -((p01 + 5.0) * 10.0).min(35.0) } else { ((-7.0 - p01).max(0.0) * 8.0).min(20.0) };
+ let exposure = scene_log_mean(src, info, s).map_or(0.0, |m| (EXPOSURE_AT_GREY + EXPOSURE_SLOPE * m).clamp(-2.0, 3.0));
AutoTone {
- exposure: (exposure as f64 * 100.0).round() / 100.0,
- contrast: contrast.round() as f64,
- highlights: highlights.round() as f64,
- shadows: shadows.round() as f64,
- whites: whites.round() as f64,
- blacks: blacks.round() as f64,
- vibrance: 12.0,
- saturation: 3.0,
+ exposure: (exposure * 100.0).round() / 100.0,
+ contrast: CONTRAST,
+ highlights: HIGHLIGHTS,
+ shadows: SHADOWS,
+ whites: 0.0,
+ blacks: 0.0,
+ vibrance: VIBRANCE,
+ saturation: 0.0,
}
}
@@ -144,13 +188,47 @@ mod tests {
use super::*;
#[test]
- fn dark_image_gets_positive_exposure() {
- let img = Rgb32f::from_fn(64, 64, |x, _| [0.01 + x as f32 * 0.0003; 3]);
- let a = auto_tone(&img, &SourceInfo::default(), &DevelopSettings::default());
- assert!(a.exposure > 1.5, "{a:?}");
- let bright = Rgb32f::from_fn(64, 64, |x, _| [0.8 + x as f32 * 0.01; 3]);
- let b = auto_tone(&bright, &SourceInfo::default(), &DevelopSettings::default());
- assert!(b.exposure < -1.0, "{b:?}");
+ fn exposure_follows_the_log_average_luminance() {
+ let flat = |y: f32| Rgb32f::filled(64, 64, [y; 3]);
+ let auto = |img: &Rgb32f| auto_tone(img, &SourceInfo::default(), &DevelopSettings::default());
+ let log_mean = |img: &Rgb32f| scene_log_mean(img, &SourceInfo::default(), &DevelopSettings::default()).unwrap();
+ // a scene at middle grey gets the exposure at grey; each EV darker adds 0.41 EV
+ assert!(log_mean(&flat(0.18)).abs() < 1e-3);
+ assert_eq!(auto(&flat(0.18)).exposure, -0.58);
+ assert!((auto(&flat(0.18 / 8.0)).exposure - (-0.58 + 3.0 * 0.41)).abs() < 1e-9);
+ // darker scenes get more, brighter ones less, within -2..3 EV
+ let ramp = |lo: f32, step: f32| Rgb32f::from_fn(64, 64, |x, _| [lo + x as f32 * step; 3]);
+ let (dark, bright) = (auto(&ramp(0.01, 0.0003)), auto(&ramp(0.8, 0.01)));
+ assert!(dark.exposure > 0.5 && bright.exposure < -1.0, "{dark:?} {bright:?}");
+ assert_eq!(auto(&flat(1e-9)).exposure, 3.0);
+ assert_eq!(auto(&flat(1e6)).exposure, -2.0);
+ // the rest is one recipe
+ assert_eq!(
+ (dark.contrast, dark.highlights, dark.shadows, dark.whites, dark.blacks, dark.vibrance, dark.saturation),
+ (68.0, -66.0, 52.0, 0.0, 0.0, 30.0, 0.0)
+ );
+ assert_eq!((dark.contrast, dark.shadows), (bright.contrast, bright.shadows));
+ }
+
+ #[test]
+ fn pixels_that_are_not_finite_are_left_out() {
+ let auto = |img: &Rgb32f| auto_tone(img, &SourceInfo::default(), &DevelopSettings::default());
+ // half middle grey, half NaN (or infinite): the grey half alone decides, as if the rest weren't there
+ for bad in [f32::NAN, f32::INFINITY, f32::NEG_INFINITY] {
+ let half = Rgb32f::from_fn(64, 64, |x, _| if x < 32 { [0.18; 3] } else { [bad; 3] });
+ assert_eq!(auto(&half).exposure, -0.58, "{bad}");
+ // also through the resampling of a source larger than the proxy (proxy pixels on the border mix both halves)
+ let big = Rgb32f::from_fn(1030, 700, |x, _| if x < 515 { [0.045; 3] } else { [bad; 3] });
+ assert!((auto(&big).exposure - (-0.58 + 2.0 * 0.41)).abs() < 1e-9, "{bad}");
+ // a few broken pixels scattered over a grey image change nothing
+ let speckled = Rgb32f::from_fn(1030, 700, |x, y| if (x * 7 + y * 13) % 97 == 0 { [bad; 3] } else { [0.18; 3] });
+ assert_eq!(auto(&speckled).exposure, -0.58, "{bad}");
+ }
+ // with no valid pixel at all (or none at all) there is nothing to measure: Exposure 0, the recipe as usual
+ for img in [Rgb32f::filled(8, 8, [f32::NAN; 3]), Rgb32f::filled(600, 600, [f32::INFINITY; 3]), Rgb32f::new(0, 0)] {
+ let a = auto(&img);
+ assert_eq!((a.exposure, a.contrast, a.vibrance), (0.0, 68.0, 30.0));
+ }
}
#[test]
diff --git a/docs/parity.md b/docs/parity.md
index 4c27755b5..7eb91d5be 100644
--- a/docs/parity.md
+++ b/docs/parity.md
@@ -236,7 +236,7 @@ under the UI command that wraps it (a no-op error); the UI command now wins.
| Id | Feature | Tier | Status | Evidence | Missing / notes |
|---|---|---|---|---|---|
-| LR-EDIT-AUTO | Auto settings | P0 | ✅ | `cmd:develop.auto`, `crates/pipeline/src/auto.rs` | |
+| LR-EDIT-AUTO | Auto settings | P0 | ✅ | `cmd:develop.auto`, `crates/pipeline/src/auto.rs` | a Lightroom-like recipe calibrated black-box on Lightroom's Auto results for 24 Sony raws: Exposure from the scene's scene-linear log-average luminance (Lightroom's observed slope, -0.41 EV per EV), Highlights -66 and Shadows +52 (Lightroom's average Auto values), Contrast +68 and Vibrance +30 fitted on our scales. Held out one photo at a time: on the 16 photos whose start Sony's DRO doesn't brighten, a median dE76 of 6.4 from Lightroom's Auto results against 8.3 unedited; on all 24, 7.7 against 7.9 (issues #318, #209). Calibrated on Sony files only; Whites and Blacks stay 0 |
| LR-EDIT-BW | Black & white | P0 | ✅ | `cmd:develop.treatment` | |
| LR-EDIT-HDR-MODE | HDR editing | P2 | ⬜ | | |
| LR-EDIT-LIGHT-EXPOSURE | Exposure | P0 | ✅ | `ctl:light.exposure` | |