Archlinux Kernel based on different schedulers and some other performance improvements.
Shell archlinuxbaby-schedcachycachy-schedulercachyoscacule-schedkernellinux-kernelperformanceperformance-tuning
linux-cachyos-rc: Add support for Distributed ThinLTO (#436)
Eric Naimb5d3bc6fe524
diff --git a/linux-cachyos-bmq/PKGBUILD b/linux-cachyos-bmq/PKGBUILDindex 2103fb1b..a4d38cbd 100644--- a/linux-cachyos-bmq/PKGBUILD+++ b/linux-cachyos-bmq/PKGBUILD@@ -85,6 +85,7 @@# ATTENTION - one of three predefined values should be selected!# "full: uses 1 thread for Linking, slow and uses more memory, theoretically with the highest performance gains."# "thin: uses multiple threads, faster and uses less memory, may have a lower runtime performance than Full."+# "thin-dist: Similar to thin, but uses a distributed model rather than in-process: https://discourse.llvm.org/t/rfc-distributed-thinlto-build-for-kernel/85934"# "none: disable LTO: "${_use_llvm_lto:=none}"@@ -125,7 +126,7 @@# ATTENTION: Do not modify after this line_is_lto_kernel() {- [[ "$_use_llvm_lto" = "thin" || "$_use_llvm_lto" = "full" ]]+ [[ "$_use_llvm_lto" = "thin" || "$_use_llvm_lto" = "full" || "$_use_llvm_lto" = "thin-dist" ]]return $?}@@ -298,6 +299,7 @@ prepare() {### Select LLVM levelcase "$_use_llvm_lto" inthin) scripts/config -e LTO_CLANG_THIN;;+ thin-dist) scripts/config -e LTO_CLANG_THIN_DIST;;full) scripts/config -e LTO_CLANG_FULL;;none) scripts/config -e LTO_NONE;;*) _die "The value '$_use_llvm_lto' is invalid. Choose the correct one again.";;diff --git a/linux-cachyos-bore/PKGBUILD b/linux-cachyos-bore/PKGBUILDindex 06264125..aee2064a 100644--- a/linux-cachyos-bore/PKGBUILD+++ b/linux-cachyos-bore/PKGBUILD@@ -85,6 +85,7 @@# ATTENTION - one of three predefined values should be selected!# "full: uses 1 thread for Linking, slow and uses more memory, theoretically with the highest performance gains."# "thin: uses multiple threads, faster and uses less memory, may have a lower runtime performance than Full."+# "thin-dist: Similar to thin, but uses a distributed model rather than in-process: https://discourse.llvm.org/t/rfc-distributed-thinlto-build-for-kernel/85934"# "none: disable LTO: "${_use_llvm_lto:=none}"@@ -125,7 +126,7 @@# ATTENTION: Do not modify after this line_is_lto_kernel() {- [[ "$_use_llvm_lto" = "thin" || "$_use_llvm_lto" = "full" ]]+ [[ "$_use_llvm_lto" = "thin" || "$_use_llvm_lto" = "full" || "$_use_llvm_lto" = "thin-dist" ]]return $?}@@ -298,6 +299,7 @@ prepare() {### Select LLVM levelcase "$_use_llvm_lto" inthin) scripts/config -e LTO_CLANG_THIN;;+ thin-dist) scripts/config -e LTO_CLANG_THIN_DIST;;full) scripts/config -e LTO_CLANG_FULL;;none) scripts/config -e LTO_NONE;;*) _die "The value '$_use_llvm_lto' is invalid. Choose the correct one again.";;diff --git a/linux-cachyos-deckify/PKGBUILD b/linux-cachyos-deckify/PKGBUILDindex 2450e2f4..cc3ebbfa 100644--- a/linux-cachyos-deckify/PKGBUILD+++ b/linux-cachyos-deckify/PKGBUILD@@ -85,6 +85,7 @@# ATTENTION - one of three predefined values should be selected!# "full: uses 1 thread for Linking, slow and uses more memory, theoretically with the highest performance gains."# "thin: uses multiple threads, faster and uses less memory, may have a lower runtime performance than Full."+# "thin-dist: Similar to thin, but uses a distributed model rather than in-process: https://discourse.llvm.org/t/rfc-distributed-thinlto-build-for-kernel/85934"# "none: disable LTO: "${_use_llvm_lto:=none}"@@ -124,7 +125,7 @@# ATTENTION: Do not modify after this line_is_lto_kernel() {- [[ "$_use_llvm_lto" = "thin" || "$_use_llvm_lto" = "full" ]]+ [[ "$_use_llvm_lto" = "thin" || "$_use_llvm_lto" = "full" || "$_use_llvm_lto" = "thin-dist" ]]return $?}@@ -299,6 +300,7 @@ prepare() {### Select LLVM levelcase "$_use_llvm_lto" inthin) scripts/config -e LTO_CLANG_THIN;;+ thin-dist) scripts/config -e LTO_CLANG_THIN_DIST;;full) scripts/config -e LTO_CLANG_FULL;;none) scripts/config -e LTO_NONE;;*) _die "The value '$_use_llvm_lto' is invalid. Choose the correct one again.";;diff --git a/linux-cachyos-eevdf/PKGBUILD b/linux-cachyos-eevdf/PKGBUILDindex c30635da..5b0e232a 100644--- a/linux-cachyos-eevdf/PKGBUILD+++ b/linux-cachyos-eevdf/PKGBUILD@@ -85,6 +85,7 @@# ATTENTION - one of three predefined values should be selected!# "full: uses 1 thread for Linking, slow and uses more memory, theoretically with the highest performance gains."# "thin: uses multiple threads, faster and uses less memory, may have a lower runtime performance than Full."+# "thin-dist: Similar to thin, but uses a distributed model rather than in-process: https://discourse.llvm.org/t/rfc-distributed-thinlto-build-for-kernel/85934"# "none: disable LTO: "${_use_llvm_lto:=none}"@@ -125,7 +126,7 @@# ATTENTION: Do not modify after this line_is_lto_kernel() {- [[ "$_use_llvm_lto" = "thin" || "$_use_llvm_lto" = "full" ]]+ [[ "$_use_llvm_lto" = "thin" || "$_use_llvm_lto" = "full" || "$_use_llvm_lto" = "thin-dist" ]]return $?}@@ -298,6 +299,7 @@ prepare() {### Select LLVM levelcase "$_use_llvm_lto" inthin) scripts/config -e LTO_CLANG_THIN;;+ thin-dist) scripts/config -e LTO_CLANG_THIN_DIST;;full) scripts/config -e LTO_CLANG_FULL;;none) scripts/config -e LTO_NONE;;*) _die "The value '$_use_llvm_lto' is invalid. Choose the correct one again.";;diff --git a/linux-cachyos-rc/PKGBUILD b/linux-cachyos-rc/PKGBUILDindex ba1b0a1e..e772c004 100644--- a/linux-cachyos-rc/PKGBUILD+++ b/linux-cachyos-rc/PKGBUILD@@ -85,8 +85,9 @@# ATTENTION - one of three predefined values should be selected!# "full: uses 1 thread for Linking, slow and uses more memory, theoretically with the highest performance gains."# "thin: uses multiple threads, faster and uses less memory, may have a lower runtime performance than Full."+# "thin-dist: Similar to thin, but uses a distributed model rather than in-process: https://discourse.llvm.org/t/rfc-distributed-thinlto-build-for-kernel/85934"# "none: disable LTO-: "${_use_llvm_lto:=thin}"+: "${_use_llvm_lto:=thin-dist}"# Use suffix -lto only when requested by the user# yes - enable -lto suffix@@ -150,7 +151,7 @@# ATTENTION: Do not modify after this line_is_lto_kernel() {- [[ "$_use_llvm_lto" = "thin" || "$_use_llvm_lto" = "full" ]]+ [[ "$_use_llvm_lto" = "thin" || "$_use_llvm_lto" = "full" || "$_use_llvm_lto" = "thin-dist" ]]return $?}@@ -337,6 +338,7 @@ prepare() {### Select LLVM levelcase "$_use_llvm_lto" inthin) scripts/config -e LTO_CLANG_THIN;;+ thin-dist) scripts/config -e LTO_CLANG_THIN_DIST;;full) scripts/config -e LTO_CLANG_FULL;;none) scripts/config -e LTO_NONE;;*) _die "The value '$_use_llvm_lto' is invalid. Choose the correct one again.";;diff --git a/linux-cachyos-rt-bore/PKGBUILD b/linux-cachyos-rt-bore/PKGBUILDindex 54159a2d..72797caa 100644--- a/linux-cachyos-rt-bore/PKGBUILD+++ b/linux-cachyos-rt-bore/PKGBUILD@@ -85,6 +85,7 @@# ATTENTION - one of three predefined values should be selected!# "full: uses 1 thread for Linking, slow and uses more memory, theoretically with the highest performance gains."# "thin: uses multiple threads, faster and uses less memory, may have a lower runtime performance than Full."+# "thin-dist: Similar to thin, but uses a distributed model rather than in-process: https://discourse.llvm.org/t/rfc-distributed-thinlto-build-for-kernel/85934"# "none: disable LTO: "${_use_llvm_lto:=none}"@@ -125,7 +126,7 @@# ATTENTION: Do not modify after this line_is_lto_kernel() {- [[ "$_use_llvm_lto" = "thin" || "$_use_llvm_lto" = "full" ]]+ [[ "$_use_llvm_lto" = "thin" || "$_use_llvm_lto" = "full" || "$_use_llvm_lto" = "thin-dist" ]]return $?}@@ -298,6 +299,7 @@ prepare() {### Select LLVM levelcase "$_use_llvm_lto" inthin) scripts/config -e LTO_CLANG_THIN;;+ thin-dist) scripts/config -e LTO_CLANG_THIN_DIST;;full) scripts/config -e LTO_CLANG_FULL;;none) scripts/config -e LTO_NONE;;*) _die "The value '$_use_llvm_lto' is invalid. Choose the correct one again.";;diff --git a/linux-cachyos-server/PKGBUILD b/linux-cachyos-server/PKGBUILDindex a65cf115..1fb9eb7a 100644--- a/linux-cachyos-server/PKGBUILD+++ b/linux-cachyos-server/PKGBUILD@@ -85,6 +85,7 @@# ATTENTION - one of three predefined values should be selected!# "full: uses 1 thread for Linking, slow and uses more memory, theoretically with the highest performance gains."# "thin: uses multiple threads, faster and uses less memory, may have a lower runtime performance than Full."+# "thin-dist: Similar to thin, but uses a distributed model rather than in-process: https://discourse.llvm.org/t/rfc-distributed-thinlto-build-for-kernel/85934"# "none: disable LTO: "${_use_llvm_lto:=none}"@@ -125,7 +126,7 @@# ATTENTION: Do not modify after this line_is_lto_kernel() {- [[ "$_use_llvm_lto" = "thin" || "$_use_llvm_lto" = "full" ]]+ [[ "$_use_llvm_lto" = "thin" || "$_use_llvm_lto" = "full" || "$_use_llvm_lto" = "thin-dist" ]]return $?}@@ -298,6 +299,7 @@ prepare() {### Select LLVM levelcase "$_use_llvm_lto" inthin) scripts/config -e LTO_CLANG_THIN;;+ thin-dist) scripts/config -e LTO_CLANG_THIN_DIST;;full) scripts/config -e LTO_CLANG_FULL;;none) scripts/config -e LTO_NONE;;*) _die "The value '$_use_llvm_lto' is invalid. Choose the correct one again.";;diff --git a/linux-cachyos/PKGBUILD b/linux-cachyos/PKGBUILDindex bd093c5b..60403e00 100644--- a/linux-cachyos/PKGBUILD+++ b/linux-cachyos/PKGBUILD@@ -85,6 +85,7 @@# ATTENTION - one of three predefined values should be selected!# "full: uses 1 thread for Linking, slow and uses more memory, theoretically with the highest performance gains."# "thin: uses multiple threads, faster and uses less memory, may have a lower runtime performance than Full."+# "thin-dist: Similar to thin, but uses a distributed model rather than in-process: https://discourse.llvm.org/t/rfc-distributed-thinlto-build-for-kernel/85934"# "none: disable LTO: "${_use_llvm_lto:=thin}"@@ -150,7 +151,7 @@# ATTENTION: Do not modify after this line_is_lto_kernel() {- [[ "$_use_llvm_lto" = "thin" || "$_use_llvm_lto" = "full" ]]+ [[ "$_use_llvm_lto" = "thin" || "$_use_llvm_lto" = "full" || "$_use_llvm_lto" = "thin-dist" ]]return $?}@@ -338,6 +339,7 @@ prepare() {### Select LLVM levelcase "$_use_llvm_lto" inthin) scripts/config -e LTO_CLANG_THIN;;+ thin-dist) scripts/config -e LTO_CLANG_THIN_DIST;;full) scripts/config -e LTO_CLANG_FULL;;none) scripts/config -e LTO_NONE;;*) _die "The value '$_use_llvm_lto' is invalid. Choose the correct one again.";;