Skip to content

Archlinux Kernel based on different schedulers and some other performance improvements.

5.17.4-2 lto fix

Peter Jungc33379e4c5d5
diff --git a/linux-bore/PKGBUILD b/linux-bore/PKGBUILD
index 06e3a8bf..1aa70a20 100644
--- a/linux-bore/PKGBUILD
+++ b/linux-bore/PKGBUILD
@@ -85,25 +85,6 @@ _use_auto_optimization=y
## Apply Kernel Optimization selecting
_use_optimization_select=
-### Selecting the ZSTD compression level
-# ATTENTION - one of two predefined values should be selected!
-# 'ultra' - highest compression ratio
-# 'normal' - standard compression ratio
-_zstd_level='normal'
-
-### Selecting the ZSTD module compression level
-# If you want to use ZSTD compression,
-# first install mkinitcpio-zstd:
-# https://gitlab.com/sirlucjan/lucjan-kernels/tree/master/depends
-# or
-# https://github.com/sirlucjan/lucjan-kernels/tree/master/depends
-# ATTENTION - one of two predefined values should be selected!
-# 'ultra' - highest compression ratio
-# 'normal' - standard compression ratio
-# WARNING: the ultra settings can sometimes
-# be counterproductive in both size and speed.
-_zstd_level_value='normal'
-
# Enable zram/zswap ZSTD compression
_zstd_compression=y
@@ -234,10 +215,12 @@ prepare() {
### Selecting the CPU scheduler
if [ "$_cpusched" = "bmq" ]; then
echo "Selecting BMQ CPU scheduler..."
+ scripts/config --enable CONFIG_SCHED_ALT
scripts/config --enable CONFIG_SCHED_BMQ
scripts/config --disable CONFIG_SCHED_PDS
elif [ "$_cpusched" = "pds" ]; then
echo "Selecting PDS CPU scheduler..."
+ scripts/config --enable CONFIG_SCHED_ALT
scripts/config --disable CONFIG_SCHED_BMQ
scripts/config --enable CONFIG_SCHED_PDS
elif [ "$_cpusched" = "cacule" ]; then
@@ -276,7 +259,7 @@ prepare() {
### Selecting the THIN or FULL-LTO compression level
if [ "$_use_llvm_lto" = "thin" ]; then
- echo "Enabling highest ZSTD compression ratio..."
+ echo "Enabling LLVM THIN LTO..."
scripts/config --disable LTO_NONE \
--enable LTO \
--enable LTO_CLANG \
@@ -286,7 +269,7 @@ prepare() {
--enable LTO_CLANG_THIN \
--enable HAVE_GCC_PLUGINS
elif [ "$_use_llvm_lto" = "full" ]; then
- echo "Enabling standard ZSTD compression ratio..."
+ echo "Enabling LLVM FULL LTO..."
scripts/config --disable LTO_NONE \
--enable LTO \
--enable LTO_CLANG \
@@ -294,14 +277,15 @@ prepare() {
--enable ARCH_SUPPORTS_LTO_CLANG_THIN \
--enable HAS_LTO_CLANG \
--enable LTO_CLANG \
+ --enable LTO_CLANG_FULL \
--enable HAVE_GCC_PLUGINS
else
scripts/config --enable CONFIG_LTO_NONE
fi
- ### Optionally set tickrate to 1000
+ ### Optionally set tickrate to 1000Hz
if [ -n "$_1k_HZ_ticks" ]; then
- echo "Setting tick rate to 1k..."
+ echo "Setting tick rate to 1k Hz..."
scripts/config --disable CONFIG_HZ_300
scripts/config --enable CONFIG_HZ_1000
scripts/config --set-val CONFIG_HZ 1000
@@ -309,7 +293,7 @@ prepare() {
### Optionally set tickrate to 750HZ
if [ -n "$_750_HZ_ticks" ]; then
- echo "Setting tick rate to 750HZ..."
+ echo "Setting tick rate to 750Hz..."
scripts/config --disable CONFIG_HZ_300
scripts/config --enable CONFIG_HZ_750
scripts/config --set-val CONFIG_HZ 750
@@ -317,7 +301,7 @@ prepare() {
### Optionally set tickrate to 600HZ
if [ -n "$_600_HZ_ticks" ]; then
- echo "Setting tick rate to 600HZ..."
+ echo "Setting tick rate to 600Hz..."
scripts/config --disable CONFIG_HZ_300
scripts/config --enable CONFIG_HZ_600
scripts/config --set-val CONFIG_HZ 600
@@ -325,7 +309,7 @@ prepare() {
### Optionally set tickrate to 500HZ
if [ -n "$_500_HZ_ticks" ]; then
- echo "Setting tick rate to 500HZ..."
+ echo "Setting tick rate to 500Hz..."
scripts/config --disable CONFIG_HZ_300
scripts/config --enable CONFIG_HZ_500
scripts/config --set-val CONFIG_HZ 500
@@ -498,49 +482,6 @@ prepare() {
scripts/config --disable CONFIG_LRNG_SELFTEST_PANIC
fi
- ### Selecting the ZSTD compression level
- if [ "$_zstd_level" = "ultra" ]; then
- echo "Enabling highest ZSTD compression ratio..."
- scripts/config --set-val CONFIG_KERNEL_ZSTD_LEVEL 19
- scripts/config --enable CONFIG_KERNEL_ZSTD_LEVEL_ULTRA
- elif [ "$_zstd_level" = "normal" ]; then
- echo "Enabling standard ZSTD compression ratio..."
- scripts/config --set-val CONFIG_KERNEL_ZSTD_LEVEL 19
- scripts/config --disable CONFIG_KERNEL_ZSTD_LEVEL_ULTRA
- else
- if [ -n "$_zstd_level" ]; then
- error "The value $_zstd_level is invalid. Choose the correct one again."
- else
- error "The value is empty. Choose the correct one again."
- fi
- error "Selecting the ZSTD compression level failed!"
- exit
- fi
-
- ### Selecting the ZSTD modules and kernel compression level
- if [ "$_zstd_level_value" = "ultra" ]; then
- echo "Enabling highest ZSTD modules compression ratio..."
- scripts/config --set-val CONFIG_MODULE_COMPRESS_ZSTD_LEVEL 19
- scripts/config --enable CONFIG_MODULE_COMPRESS_ZSTD_ULTRA
- scripts/config --set-val CONFIG_MODULE_COMPRESS_ZSTD_LEVEL_ULTRA 22
- echo "Enabling highest ZSTD kernel compression ratio..."
- scripts/config --set-val CONFIG_ZSTD_COMP_VAL 22
- elif [ "$_zstd_level_value" = "normal" ]; then
- echo "Enabling standard ZSTD modules compression ratio..."
- scripts/config --set-val CONFIG_MODULE_COMPRESS_ZSTD_LEVEL 19
- scripts/config --disable CONFIG_MODULE_COMPRESS_ZSTD_ULTRA
- echo "Enabling standard ZSTD kernel compression ratio..."
- scripts/config --set-val CONFIG_ZSTD_COMP_VAL 19
- else
- if [ -n "$_zstd_level_value" ]; then
- error "The value $_zstd_level_value is invalid. Choose the correct one again."
- else
- error "The value is empty. Choose the correct one again."
- fi
- error "Selecting the ZSTD modules and kernel compression level failed!"
- exit
- fi
-
### Enable zram/zswap ZSTD compression
if [ -n "$_zstd_swap_compression" ]; then
echo "Enabling zram ZSTD compression..."
diff --git a/linux-cachyos-bmq/PKGBUILD b/linux-cachyos-bmq/PKGBUILD
index 78617a5a..0420be81 100644
--- a/linux-cachyos-bmq/PKGBUILD
+++ b/linux-cachyos-bmq/PKGBUILD
@@ -85,25 +85,6 @@ _use_auto_optimization=y
## Apply Kernel Optimization selecting
_use_optimization_select=
-### Selecting the ZSTD compression level
-# ATTENTION - one of two predefined values should be selected!
-# 'ultra' - highest compression ratio
-# 'normal' - standard compression ratio
-_zstd_level='normal'
-
-### Selecting the ZSTD module compression level
-# If you want to use ZSTD compression,
-# first install mkinitcpio-zstd:
-# https://gitlab.com/sirlucjan/lucjan-kernels/tree/master/depends
-# or
-# https://github.com/sirlucjan/lucjan-kernels/tree/master/depends
-# ATTENTION - one of two predefined values should be selected!
-# 'ultra' - highest compression ratio
-# 'normal' - standard compression ratio
-# WARNING: the ultra settings can sometimes
-# be counterproductive in both size and speed.
-_zstd_level_value='normal'
-
# Enable zram/zswap ZSTD compression
_zstd_compression=y
@@ -277,7 +258,7 @@ prepare() {
### Selecting the THIN or FULL-LTO compression level
if [ "$_use_llvm_lto" = "thin" ]; then
- echo "Enabling highest ZSTD compression ratio..."
+ echo "Enabling LLVM THIN LTO..."
scripts/config --disable LTO_NONE \
--enable LTO \
--enable LTO_CLANG \
@@ -287,7 +268,7 @@ prepare() {
--enable LTO_CLANG_THIN \
--enable HAVE_GCC_PLUGINS
elif [ "$_use_llvm_lto" = "full" ]; then
- echo "Enabling standard ZSTD compression ratio..."
+ echo "Enabling LLVM FULL LTO..."
scripts/config --disable LTO_NONE \
--enable LTO \
--enable LTO_CLANG \
@@ -295,14 +276,15 @@ prepare() {
--enable ARCH_SUPPORTS_LTO_CLANG_THIN \
--enable HAS_LTO_CLANG \
--enable LTO_CLANG \
+ --enable LTO_CLANG_FULL \
--enable HAVE_GCC_PLUGINS
else
scripts/config --enable CONFIG_LTO_NONE
fi
- ### Optionally set tickrate to 1000
+ ### Optionally set tickrate to 1000Hz
if [ -n "$_1k_HZ_ticks" ]; then
- echo "Setting tick rate to 1k..."
+ echo "Setting tick rate to 1k Hz..."
scripts/config --disable CONFIG_HZ_300
scripts/config --enable CONFIG_HZ_1000
scripts/config --set-val CONFIG_HZ 1000
@@ -310,7 +292,7 @@ prepare() {
### Optionally set tickrate to 750HZ
if [ -n "$_750_HZ_ticks" ]; then
- echo "Setting tick rate to 750HZ..."
+ echo "Setting tick rate to 750Hz..."
scripts/config --disable CONFIG_HZ_300
scripts/config --enable CONFIG_HZ_750
scripts/config --set-val CONFIG_HZ 750
@@ -318,7 +300,7 @@ prepare() {
### Optionally set tickrate to 600HZ
if [ -n "$_600_HZ_ticks" ]; then
- echo "Setting tick rate to 600HZ..."
+ echo "Setting tick rate to 600Hz..."
scripts/config --disable CONFIG_HZ_300
scripts/config --enable CONFIG_HZ_600
scripts/config --set-val CONFIG_HZ 600
@@ -326,7 +308,7 @@ prepare() {
### Optionally set tickrate to 500HZ
if [ -n "$_500_HZ_ticks" ]; then
- echo "Setting tick rate to 500HZ..."
+ echo "Setting tick rate to 500Hz..."
scripts/config --disable CONFIG_HZ_300
scripts/config --enable CONFIG_HZ_500
scripts/config --set-val CONFIG_HZ 500
@@ -499,49 +481,6 @@ prepare() {
scripts/config --disable CONFIG_LRNG_SELFTEST_PANIC
fi
- ### Selecting the ZSTD compression level
- if [ "$_zstd_level" = "ultra" ]; then
- echo "Enabling highest ZSTD compression ratio..."
- scripts/config --set-val CONFIG_KERNEL_ZSTD_LEVEL 19
- scripts/config --enable CONFIG_KERNEL_ZSTD_LEVEL_ULTRA
- elif [ "$_zstd_level" = "normal" ]; then
- echo "Enabling standard ZSTD compression ratio..."
- scripts/config --set-val CONFIG_KERNEL_ZSTD_LEVEL 19
- scripts/config --disable CONFIG_KERNEL_ZSTD_LEVEL_ULTRA
- else
- if [ -n "$_zstd_level" ]; then
- error "The value $_zstd_level is invalid. Choose the correct one again."
- else
- error "The value is empty. Choose the correct one again."
- fi
- error "Selecting the ZSTD compression level failed!"
- exit
- fi
-
- ### Selecting the ZSTD modules and kernel compression level
- if [ "$_zstd_level_value" = "ultra" ]; then
- echo "Enabling highest ZSTD modules compression ratio..."
- scripts/config --set-val CONFIG_MODULE_COMPRESS_ZSTD_LEVEL 19
- scripts/config --enable CONFIG_MODULE_COMPRESS_ZSTD_ULTRA
- scripts/config --set-val CONFIG_MODULE_COMPRESS_ZSTD_LEVEL_ULTRA 22
- echo "Enabling highest ZSTD kernel compression ratio..."
- scripts/config --set-val CONFIG_ZSTD_COMP_VAL 22
- elif [ "$_zstd_level_value" = "normal" ]; then
- echo "Enabling standard ZSTD modules compression ratio..."
- scripts/config --set-val CONFIG_MODULE_COMPRESS_ZSTD_LEVEL 19
- scripts/config --disable CONFIG_MODULE_COMPRESS_ZSTD_ULTRA
- echo "Enabling standard ZSTD kernel compression ratio..."
- scripts/config --set-val CONFIG_ZSTD_COMP_VAL 19
- else
- if [ -n "$_zstd_level_value" ]; then
- error "The value $_zstd_level_value is invalid. Choose the correct one again."
- else
- error "The value is empty. Choose the correct one again."
- fi
- error "Selecting the ZSTD modules and kernel compression level failed!"
- exit
- fi
-
### Enable zram/zswap ZSTD compression
if [ -n "$_zstd_swap_compression" ]; then
echo "Enabling zram ZSTD compression..."
diff --git a/linux-cachyos-bore/PKGBUILD b/linux-cachyos-bore/PKGBUILD
index 28733f96..59149d70 100644
--- a/linux-cachyos-bore/PKGBUILD
+++ b/linux-cachyos-bore/PKGBUILD
@@ -85,25 +85,6 @@ _use_auto_optimization=y
## Apply Kernel Optimization selecting
_use_optimization_select=
-### Selecting the ZSTD compression level
-# ATTENTION - one of two predefined values should be selected!
-# 'ultra' - highest compression ratio
-# 'normal' - standard compression ratio
-_zstd_level='normal'
-
-### Selecting the ZSTD module compression level
-# If you want to use ZSTD compression,
-# first install mkinitcpio-zstd:
-# https://gitlab.com/sirlucjan/lucjan-kernels/tree/master/depends
-# or
-# https://github.com/sirlucjan/lucjan-kernels/tree/master/depends
-# ATTENTION - one of two predefined values should be selected!
-# 'ultra' - highest compression ratio
-# 'normal' - standard compression ratio
-# WARNING: the ultra settings can sometimes
-# be counterproductive in both size and speed.
-_zstd_level_value='normal'
-
# Enable zram/zswap ZSTD compression
_zstd_compression=y
@@ -234,10 +215,12 @@ prepare() {
### Selecting the CPU scheduler
if [ "$_cpusched" = "bmq" ]; then
echo "Selecting BMQ CPU scheduler..."
+ scripts/config --enable CONFIG_SCHED_ALT
scripts/config --enable CONFIG_SCHED_BMQ
scripts/config --disable CONFIG_SCHED_PDS
elif [ "$_cpusched" = "pds" ]; then
echo "Selecting PDS CPU scheduler..."
+ scripts/config --enable CONFIG_SCHED_ALT
scripts/config --disable CONFIG_SCHED_BMQ
scripts/config --enable CONFIG_SCHED_PDS
elif [ "$_cpusched" = "cacule" ]; then
@@ -276,7 +259,7 @@ prepare() {
### Selecting the THIN or FULL-LTO compression level
if [ "$_use_llvm_lto" = "thin" ]; then
- echo "Enabling highest ZSTD compression ratio..."
+ echo "Enabling LLVM THIN LTO..."
scripts/config --disable LTO_NONE \
--enable LTO \
--enable LTO_CLANG \
@@ -286,7 +269,7 @@ prepare() {
--enable LTO_CLANG_THIN \
--enable HAVE_GCC_PLUGINS
elif [ "$_use_llvm_lto" = "full" ]; then
- echo "Enabling standard ZSTD compression ratio..."
+ echo "Enabling LLVM FULL LTO..."
scripts/config --disable LTO_NONE \
--enable LTO \
--enable LTO_CLANG \
@@ -294,14 +277,15 @@ prepare() {
--enable ARCH_SUPPORTS_LTO_CLANG_THIN \
--enable HAS_LTO_CLANG \
--enable LTO_CLANG \
+ --enable LTO_CLANG_FULL \
--enable HAVE_GCC_PLUGINS
else
scripts/config --enable CONFIG_LTO_NONE
fi
- ### Optionally set tickrate to 1000
+ ### Optionally set tickrate to 1000Hz
if [ -n "$_1k_HZ_ticks" ]; then
- echo "Setting tick rate to 1k..."
+ echo "Setting tick rate to 1k Hz..."
scripts/config --disable CONFIG_HZ_300
scripts/config --enable CONFIG_HZ_1000
scripts/config --set-val CONFIG_HZ 1000
@@ -309,7 +293,7 @@ prepare() {
### Optionally set tickrate to 750HZ
if [ -n "$_750_HZ_ticks" ]; then
- echo "Setting tick rate to 750HZ..."
+ echo "Setting tick rate to 750Hz..."
scripts/config --disable CONFIG_HZ_300
scripts/config --enable CONFIG_HZ_750
scripts/config --set-val CONFIG_HZ 750
@@ -317,7 +301,7 @@ prepare() {
### Optionally set tickrate to 600HZ
if [ -n "$_600_HZ_ticks" ]; then
- echo "Setting tick rate to 600HZ..."
+ echo "Setting tick rate to 600Hz..."
scripts/config --disable CONFIG_HZ_300
scripts/config --enable CONFIG_HZ_600
scripts/config --set-val CONFIG_HZ 600
@@ -325,7 +309,7 @@ prepare() {
### Optionally set tickrate to 500HZ
if [ -n "$_500_HZ_ticks" ]; then
- echo "Setting tick rate to 500HZ..."
+ echo "Setting tick rate to 500Hz..."
scripts/config --disable CONFIG_HZ_300
scripts/config --enable CONFIG_HZ_500
scripts/config --set-val CONFIG_HZ 500
@@ -498,49 +482,6 @@ prepare() {
scripts/config --disable CONFIG_LRNG_SELFTEST_PANIC
fi
- ### Selecting the ZSTD compression level
- if [ "$_zstd_level" = "ultra" ]; then
- echo "Enabling highest ZSTD compression ratio..."
- scripts/config --set-val CONFIG_KERNEL_ZSTD_LEVEL 19
- scripts/config --enable CONFIG_KERNEL_ZSTD_LEVEL_ULTRA
- elif [ "$_zstd_level" = "normal" ]; then
- echo "Enabling standard ZSTD compression ratio..."
- scripts/config --set-val CONFIG_KERNEL_ZSTD_LEVEL 19
- scripts/config --disable CONFIG_KERNEL_ZSTD_LEVEL_ULTRA
- else
- if [ -n "$_zstd_level" ]; then
- error "The value $_zstd_level is invalid. Choose the correct one again."
- else
- error "The value is empty. Choose the correct one again."
- fi
- error "Selecting the ZSTD compression level failed!"
- exit
- fi
-
- ### Selecting the ZSTD modules and kernel compression level
- if [ "$_zstd_level_value" = "ultra" ]; then
- echo "Enabling highest ZSTD modules compression ratio..."
- scripts/config --set-val CONFIG_MODULE_COMPRESS_ZSTD_LEVEL 19
- scripts/config --enable CONFIG_MODULE_COMPRESS_ZSTD_ULTRA
- scripts/config --set-val CONFIG_MODULE_COMPRESS_ZSTD_LEVEL_ULTRA 22
- echo "Enabling highest ZSTD kernel compression ratio..."
- scripts/config --set-val CONFIG_ZSTD_COMP_VAL 22
- elif [ "$_zstd_level_value" = "normal" ]; then
- echo "Enabling standard ZSTD modules compression ratio..."
- scripts/config --set-val CONFIG_MODULE_COMPRESS_ZSTD_LEVEL 19
- scripts/config --disable CONFIG_MODULE_COMPRESS_ZSTD_ULTRA
- echo "Enabling standard ZSTD kernel compression ratio..."
- scripts/config --set-val CONFIG_ZSTD_COMP_VAL 19
- else
- if [ -n "$_zstd_level_value" ]; then
- error "The value $_zstd_level_value is invalid. Choose the correct one again."
- else
- error "The value is empty. Choose the correct one again."
- fi
- error "Selecting the ZSTD modules and kernel compression level failed!"
- exit
- fi
-
### Enable zram/zswap ZSTD compression
if [ -n "$_zstd_swap_compression" ]; then
echo "Enabling zram ZSTD compression..."
diff --git a/linux-cachyos-cacule/PKGBUILD b/linux-cachyos-cacule/PKGBUILD
index 64ba73a6..b6d5a8af 100644
--- a/linux-cachyos-cacule/PKGBUILD
+++ b/linux-cachyos-cacule/PKGBUILD
@@ -85,25 +85,6 @@ _use_auto_optimization=y
## Apply Kernel Optimization selecting
_use_optimization_select=
-### Selecting the ZSTD compression level
-# ATTENTION - one of two predefined values should be selected!
-# 'ultra' - highest compression ratio
-# 'normal' - standard compression ratio
-_zstd_level='normal'
-
-### Selecting the ZSTD module compression level
-# If you want to use ZSTD compression,
-# first install mkinitcpio-zstd:
-# https://gitlab.com/sirlucjan/lucjan-kernels/tree/master/depends
-# or
-# https://github.com/sirlucjan/lucjan-kernels/tree/master/depends
-# ATTENTION - one of two predefined values should be selected!
-# 'ultra' - highest compression ratio
-# 'normal' - standard compression ratio
-# WARNING: the ultra settings can sometimes
-# be counterproductive in both size and speed.
-_zstd_level_value='normal'
-
# Enable zram/zswap ZSTD compression
_zstd_compression=y
@@ -234,10 +215,12 @@ prepare() {
### Selecting the CPU scheduler
if [ "$_cpusched" = "bmq" ]; then
echo "Selecting BMQ CPU scheduler..."
+ scripts/config --enable CONFIG_SCHED_ALT
scripts/config --enable CONFIG_SCHED_BMQ
scripts/config --disable CONFIG_SCHED_PDS
elif [ "$_cpusched" = "pds" ]; then
echo "Selecting PDS CPU scheduler..."
+ scripts/config --enable CONFIG_SCHED_ALT
scripts/config --disable CONFIG_SCHED_BMQ
scripts/config --enable CONFIG_SCHED_PDS
elif [ "$_cpusched" = "cacule" ]; then
@@ -276,7 +259,7 @@ prepare() {
### Selecting the THIN or FULL-LTO compression level
if [ "$_use_llvm_lto" = "thin" ]; then
- echo "Enabling highest ZSTD compression ratio..."
+ echo "Enabling LLVM THIN LTO..."
scripts/config --disable LTO_NONE \
--enable LTO \
--enable LTO_CLANG \
@@ -286,7 +269,7 @@ prepare() {
--enable LTO_CLANG_THIN \
--enable HAVE_GCC_PLUGINS
elif [ "$_use_llvm_lto" = "full" ]; then
- echo "Enabling standard ZSTD compression ratio..."
+ echo "Enabling LLVM FULL LTO..."
scripts/config --disable LTO_NONE \
--enable LTO \
--enable LTO_CLANG \
@@ -294,14 +277,15 @@ prepare() {
--enable ARCH_SUPPORTS_LTO_CLANG_THIN \
--enable HAS_LTO_CLANG \
--enable LTO_CLANG \
+ --enable LTO_CLANG_FULL \
--enable HAVE_GCC_PLUGINS
else
scripts/config --enable CONFIG_LTO_NONE
fi
- ### Optionally set tickrate to 1000
+ ### Optionally set tickrate to 1000Hz
if [ -n "$_1k_HZ_ticks" ]; then
- echo "Setting tick rate to 1k..."
+ echo "Setting tick rate to 1k Hz..."
scripts/config --disable CONFIG_HZ_300
scripts/config --enable CONFIG_HZ_1000
scripts/config --set-val CONFIG_HZ 1000
@@ -309,7 +293,7 @@ prepare() {
### Optionally set tickrate to 750HZ
if [ -n "$_750_HZ_ticks" ]; then
- echo "Setting tick rate to 750HZ..."
+ echo "Setting tick rate to 750Hz..."
scripts/config --disable CONFIG_HZ_300
scripts/config --enable CONFIG_HZ_750
scripts/config --set-val CONFIG_HZ 750
@@ -317,7 +301,7 @@ prepare() {
### Optionally set tickrate to 600HZ
if [ -n "$_600_HZ_ticks" ]; then
- echo "Setting tick rate to 600HZ..."
+ echo "Setting tick rate to 600Hz..."
scripts/config --disable CONFIG_HZ_300
scripts/config --enable CONFIG_HZ_600
scripts/config --set-val CONFIG_HZ 600
@@ -325,7 +309,7 @@ prepare() {
### Optionally set tickrate to 500HZ
if [ -n "$_500_HZ_ticks" ]; then
- echo "Setting tick rate to 500HZ..."
+ echo "Setting tick rate to 500Hz..."
scripts/config --disable CONFIG_HZ_300
scripts/config --enable CONFIG_HZ_500
scripts/config --set-val CONFIG_HZ 500
@@ -498,49 +482,6 @@ prepare() {
scripts/config --disable CONFIG_LRNG_SELFTEST_PANIC
fi
- ### Selecting the ZSTD compression level
- if [ "$_zstd_level" = "ultra" ]; then
- echo "Enabling highest ZSTD compression ratio..."
- scripts/config --set-val CONFIG_KERNEL_ZSTD_LEVEL 19
- scripts/config --enable CONFIG_KERNEL_ZSTD_LEVEL_ULTRA
- elif [ "$_zstd_level" = "normal" ]; then
- echo "Enabling standard ZSTD compression ratio..."
- scripts/config --set-val CONFIG_KERNEL_ZSTD_LEVEL 19
- scripts/config --disable CONFIG_KERNEL_ZSTD_LEVEL_ULTRA
- else
- if [ -n "$_zstd_level" ]; then
- error "The value $_zstd_level is invalid. Choose the correct one again."
- else
- error "The value is empty. Choose the correct one again."
- fi
- error "Selecting the ZSTD compression level failed!"
- exit
- fi
-
- ### Selecting the ZSTD modules and kernel compression level
- if [ "$_zstd_level_value" = "ultra" ]; then
- echo "Enabling highest ZSTD modules compression ratio..."
- scripts/config --set-val CONFIG_MODULE_COMPRESS_ZSTD_LEVEL 19
- scripts/config --enable CONFIG_MODULE_COMPRESS_ZSTD_ULTRA
- scripts/config --set-val CONFIG_MODULE_COMPRESS_ZSTD_LEVEL_ULTRA 22
- echo "Enabling highest ZSTD kernel compression ratio..."
- scripts/config --set-val CONFIG_ZSTD_COMP_VAL 22
- elif [ "$_zstd_level_value" = "normal" ]; then
- echo "Enabling standard ZSTD modules compression ratio..."
- scripts/config --set-val CONFIG_MODULE_COMPRESS_ZSTD_LEVEL 19
- scripts/config --disable CONFIG_MODULE_COMPRESS_ZSTD_ULTRA
- echo "Enabling standard ZSTD kernel compression ratio..."
- scripts/config --set-val CONFIG_ZSTD_COMP_VAL 19
- else
- if [ -n "$_zstd_level_value" ]; then
- error "The value $_zstd_level_value is invalid. Choose the correct one again."
- else
- error "The value is empty. Choose the correct one again."
- fi
- error "Selecting the ZSTD modules and kernel compression level failed!"
- exit
- fi
-
### Enable zram/zswap ZSTD compression
if [ -n "$_zstd_swap_compression" ]; then
echo "Enabling zram ZSTD compression..."
diff --git a/linux-cachyos-pds/PKGBUILD b/linux-cachyos-pds/PKGBUILD
index fd950f2e..f21dfead 100644
--- a/linux-cachyos-pds/PKGBUILD
+++ b/linux-cachyos-pds/PKGBUILD
@@ -85,25 +85,6 @@ _use_auto_optimization=y
## Apply Kernel Optimization selecting
_use_optimization_select=
-### Selecting the ZSTD compression level
-# ATTENTION - one of two predefined values should be selected!
-# 'ultra' - highest compression ratio
-# 'normal' - standard compression ratio
-_zstd_level='normal'
-
-### Selecting the ZSTD module compression level
-# If you want to use ZSTD compression,
-# first install mkinitcpio-zstd:
-# https://gitlab.com/sirlucjan/lucjan-kernels/tree/master/depends
-# or
-# https://github.com/sirlucjan/lucjan-kernels/tree/master/depends
-# ATTENTION - one of two predefined values should be selected!
-# 'ultra' - highest compression ratio
-# 'normal' - standard compression ratio
-# WARNING: the ultra settings can sometimes
-# be counterproductive in both size and speed.
-_zstd_level_value='normal'
-
# Enable zram/zswap ZSTD compression
_zstd_compression=y
@@ -277,7 +258,7 @@ prepare() {
### Selecting the THIN or FULL-LTO compression level
if [ "$_use_llvm_lto" = "thin" ]; then
- echo "Enabling highest ZSTD compression ratio..."
+ echo "Enabling LLVM THIN LTO..."
scripts/config --disable LTO_NONE \
--enable LTO \
--enable LTO_CLANG \
@@ -287,7 +268,7 @@ prepare() {
--enable LTO_CLANG_THIN \
--enable HAVE_GCC_PLUGINS
elif [ "$_use_llvm_lto" = "full" ]; then
- echo "Enabling standard ZSTD compression ratio..."
+ echo "Enabling LLVM FULL LTO..."
scripts/config --disable LTO_NONE \
--enable LTO \
--enable LTO_CLANG \
@@ -295,14 +276,15 @@ prepare() {
--enable ARCH_SUPPORTS_LTO_CLANG_THIN \
--enable HAS_LTO_CLANG \
--enable LTO_CLANG \
+ --enable LTO_CLANG_FULL \
--enable HAVE_GCC_PLUGINS
else
scripts/config --enable CONFIG_LTO_NONE
fi
- ### Optionally set tickrate to 1000
+ ### Optionally set tickrate to 1000Hz
if [ -n "$_1k_HZ_ticks" ]; then
- echo "Setting tick rate to 1k..."
+ echo "Setting tick rate to 1k Hz..."
scripts/config --disable CONFIG_HZ_300
scripts/config --enable CONFIG_HZ_1000
scripts/config --set-val CONFIG_HZ 1000
@@ -310,7 +292,7 @@ prepare() {
### Optionally set tickrate to 750HZ
if [ -n "$_750_HZ_ticks" ]; then
- echo "Setting tick rate to 750HZ..."
+ echo "Setting tick rate to 750Hz..."
scripts/config --disable CONFIG_HZ_300
scripts/config --enable CONFIG_HZ_750
scripts/config --set-val CONFIG_HZ 750
@@ -318,7 +300,7 @@ prepare() {
### Optionally set tickrate to 600HZ
if [ -n "$_600_HZ_ticks" ]; then
- echo "Setting tick rate to 600HZ..."
+ echo "Setting tick rate to 600Hz..."
scripts/config --disable CONFIG_HZ_300
scripts/config --enable CONFIG_HZ_600
scripts/config --set-val CONFIG_HZ 600
@@ -326,7 +308,7 @@ prepare() {
### Optionally set tickrate to 500HZ
if [ -n "$_500_HZ_ticks" ]; then
- echo "Setting tick rate to 500HZ..."
+ echo "Setting tick rate to 500Hz..."
scripts/config --disable CONFIG_HZ_300
scripts/config --enable CONFIG_HZ_500
scripts/config --set-val CONFIG_HZ 500
@@ -499,49 +481,6 @@ prepare() {
scripts/config --disable CONFIG_LRNG_SELFTEST_PANIC
fi
- ### Selecting the ZSTD compression level
- if [ "$_zstd_level" = "ultra" ]; then
- echo "Enabling highest ZSTD compression ratio..."
- scripts/config --set-val CONFIG_KERNEL_ZSTD_LEVEL 19
- scripts/config --enable CONFIG_KERNEL_ZSTD_LEVEL_ULTRA
- elif [ "$_zstd_level" = "normal" ]; then
- echo "Enabling standard ZSTD compression ratio..."
- scripts/config --set-val CONFIG_KERNEL_ZSTD_LEVEL 19
- scripts/config --disable CONFIG_KERNEL_ZSTD_LEVEL_ULTRA
- else
- if [ -n "$_zstd_level" ]; then
- error "The value $_zstd_level is invalid. Choose the correct one again."
- else
- error "The value is empty. Choose the correct one again."
- fi
- error "Selecting the ZSTD compression level failed!"
- exit
- fi
-
- ### Selecting the ZSTD modules and kernel compression level
- if [ "$_zstd_level_value" = "ultra" ]; then
- echo "Enabling highest ZSTD modules compression ratio..."
- scripts/config --set-val CONFIG_MODULE_COMPRESS_ZSTD_LEVEL 19
- scripts/config --enable CONFIG_MODULE_COMPRESS_ZSTD_ULTRA
- scripts/config --set-val CONFIG_MODULE_COMPRESS_ZSTD_LEVEL_ULTRA 22
- echo "Enabling highest ZSTD kernel compression ratio..."
- scripts/config --set-val CONFIG_ZSTD_COMP_VAL 22
- elif [ "$_zstd_level_value" = "normal" ]; then
- echo "Enabling standard ZSTD modules compression ratio..."
- scripts/config --set-val CONFIG_MODULE_COMPRESS_ZSTD_LEVEL 19
- scripts/config --disable CONFIG_MODULE_COMPRESS_ZSTD_ULTRA
- echo "Enabling standard ZSTD kernel compression ratio..."
- scripts/config --set-val CONFIG_ZSTD_COMP_VAL 19
- else
- if [ -n "$_zstd_level_value" ]; then
- error "The value $_zstd_level_value is invalid. Choose the correct one again."
- else
- error "The value is empty. Choose the correct one again."
- fi
- error "Selecting the ZSTD modules and kernel compression level failed!"
- exit
- fi
-
### Enable zram/zswap ZSTD compression
if [ -n "$_zstd_swap_compression" ]; then
echo "Enabling zram ZSTD compression..."
diff --git a/linux-cachyos-rc/PKGBUILD b/linux-cachyos-rc/PKGBUILD
index 9e5bb229..16d7a4ff 100644
--- a/linux-cachyos-rc/PKGBUILD
+++ b/linux-cachyos-rc/PKGBUILD
@@ -24,7 +24,7 @@ _makenconfig=
# NUMA is optimized for multi-socket motherboards.
# A single multi-core CPU actually runs slower with NUMA enabled.
# See, https://bugs.archlinux.org/task/31187
-_NUMAdisable=
+_NUMAdisable=y
# Compile ONLY used modules to VASTLYreduce the number of modules built
# and the build time.
@@ -52,19 +52,22 @@ _per_gov=y
### Enable TCP_CONG_BBR2
_tcp_bbr2=y
-### Running with a 1000HZ, 750Hz or 500HZ tick rate
+### Running with a 1000HZ, 750Hz, 600 Hz or 500Hz tick rate
_1k_HZ_ticks=
_750_HZ_ticks=y
_600_HZ_ticks=
_500_HZ_ticks=
+##ä Choose between perodic, tickless idle or full tickless
+### Full tickless can give higher performances in various cases but, depending on hardware, lower consistency. Just tickless idle can perform better on some platforms (mostly AMD based).
+_tickrate=full
+
### Disable MQ-Deadline I/O scheduler
_mq_deadline_disable=y
### Disable Kyber I/O scheduler
_kyber_disable=y
-
### Enable multigenerational LRU
_lru_enable=y
@@ -82,31 +85,14 @@ _use_auto_optimization=y
## Apply Kernel Optimization selecting
_use_optimization_select=
-### Selecting the ZSTD compression level
-# ATTENTION - one of two predefined values should be selected!
-# 'ultra' - highest compression ratio
-# 'normal' - standard compression ratio
-_zstd_level='normal'
-
-### Selecting the ZSTD module compression level
-# If you want to use ZSTD compression,
-# first install mkinitcpio-zstd:
-# https://gitlab.com/sirlucjan/lucjan-kernels/tree/master/depends
-# or
-# https://github.com/sirlucjan/lucjan-kernels/tree/master/depends
-# ATTENTION - one of two predefined values should be selected!
-# 'ultra' - highest compression ratio
-# 'normal' - standard compression ratio
-# WARNING: the ultra settings can sometimes
-# be counterproductive in both size and speed.
-_zstd_level_value='normal'
-
# Enable zram/zswap ZSTD compression
_zstd_compression=y
_nf_cone=y
-## Enable it for compiling with LLVM and THINLTO
+# Clang LTO mode, only available with the "llvm" compiler - options are "no", "full" or "thin".
+# "full: uses 1 thread for Linking, slow and uses more memory, theoretically with the highest performance gains."
+# "thin: uses multiple threads, faster and uses less memory, may have a lower runtime performance than Full."
_use_llvm_lto=
# Enable it for using the LLVM CFI PATCH for a better security
@@ -216,10 +202,12 @@ prepare() {
### Selecting the CPU scheduler
if [ "$_cpusched" = "bmq" ]; then
echo "Selecting BMQ CPU scheduler..."
+ scripts/config --enable CONFIG_SCHED_ALT
scripts/config --enable CONFIG_SCHED_BMQ
scripts/config --disable CONFIG_SCHED_PDS
elif [ "$_cpusched" = "pds" ]; then
echo "Selecting PDS CPU scheduler..."
+ scripts/config --enable CONFIG_SCHED_ALT
scripts/config --disable CONFIG_SCHED_BMQ
scripts/config --enable CONFIG_SCHED_PDS
elif [ "$_cpusched" = "cacule" ]; then
@@ -256,7 +244,9 @@ prepare() {
scripts/config --enable CONFIG_CFI_CLANG
fi
- if [ -n "$_use_llvm_lto" ]; then
+ ### Selecting the THIN or FULL-LTO compression level
+ if [ "$_use_llvm_lto" = "thin" ]; then
+ echo "Enabling LLVM THIN LTO..."
scripts/config --disable LTO_NONE \
--enable LTO \
--enable LTO_CLANG \
@@ -265,11 +255,24 @@ prepare() {
--enable HAS_LTO_CLANG \
--enable LTO_CLANG_THIN \
--enable HAVE_GCC_PLUGINS
+ elif [ "$_use_llvm_lto" = "full" ]; then
+ echo "Enabling LLVM FULL LTO..."
+ scripts/config --disable LTO_NONE \
+ --enable LTO \
+ --enable LTO_CLANG \
+ --enable ARCH_SUPPORTS_LTO_CLANG \
+ --enable ARCH_SUPPORTS_LTO_CLANG_THIN \
+ --enable HAS_LTO_CLANG \
+ --enable LTO_CLANG \
+ --enable LTO_CLANG_FULL \
+ --enable HAVE_GCC_PLUGINS
+ else
+ scripts/config --enable CONFIG_LTO_NONE
fi
- ### Optionally set tickrate to 1000
+ ### Optionally set tickrate to 1000Hz
if [ -n "$_1k_HZ_ticks" ]; then
- echo "Setting tick rate to 1k..."
+ echo "Setting tick rate to 1k Hz..."
scripts/config --disable CONFIG_HZ_300
scripts/config --enable CONFIG_HZ_1000
scripts/config --set-val CONFIG_HZ 1000
@@ -277,7 +280,7 @@ prepare() {
### Optionally set tickrate to 750HZ
if [ -n "$_750_HZ_ticks" ]; then
- echo "Setting tick rate to 750HZ..."
+ echo "Setting tick rate to 750Hz..."
scripts/config --disable CONFIG_HZ_300
scripts/config --enable CONFIG_HZ_750
scripts/config --set-val CONFIG_HZ 750
@@ -285,7 +288,7 @@ prepare() {
### Optionally set tickrate to 600HZ
if [ -n "$_600_HZ_ticks" ]; then
- echo "Setting tick rate to 600HZ..."
+ echo "Setting tick rate to 600Hz..."
scripts/config --disable CONFIG_HZ_300
scripts/config --enable CONFIG_HZ_600
scripts/config --set-val CONFIG_HZ 600
@@ -293,7 +296,7 @@ prepare() {
### Optionally set tickrate to 500HZ
if [ -n "$_500_HZ_ticks" ]; then
- echo "Setting tick rate to 500HZ..."
+ echo "Setting tick rate to 500Hz..."
scripts/config --disable CONFIG_HZ_300
scripts/config --enable CONFIG_HZ_500
scripts/config --set-val CONFIG_HZ 500
@@ -304,11 +307,17 @@ prepare() {
if [ -n "$_NUMAdisable" ]; then
echo "Disabling NUMA from kernel config..."
scripts/config --disable CONFIG_NUMA
- fi
-
- if [ -n "$_winesync" ]; then
- echo "Enable winesync support"
- scripts/config --module CONFIG_WINESYNC
+ scripts/config --disable CONFIG_AMD_NUMA
+ scripts/config --disable CONFIG_X86_64_ACPI_NUMA
+ scripts/config --disable CONFIG_NODES_SPAN_OTHER_NODES
+ scripts/config --disable CONFIG_NUMA_EMU
+ scripts/config --disable CONFIG_NEED_MULTIPLE_NODES
+ scripts/config --disable CONFIG_USE_PERCPU_NUMA_NODE_ID
+ scripts/config --disable CONFIG_ACPI_NUMA
+ scripts/config --disable CONFIG_ARCH_SUPPORTS_NUMA_BALANCING
+ scripts/config --disable CONFIG_NODES_SHIFT
+ scripts/config --undefine CONFIG_NODES_SHIFT
+ scripts/config --disable CONFIG_NEED_MULTIPLE_NODES
fi
### Disable MQ-Deadline I/O scheduler
@@ -328,11 +337,38 @@ prepare() {
echo "Setting performance governor..."
scripts/config --disable CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL
scripts/config --enable CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE
- echo "Disabling uneeded governors..."
- scripts/config --disable CONFIG_CPU_FREQ_GOV_ONDEMAND
- scripts/config --disable CONFIG_CPU_FREQ_GOV_CONSERVATIVE
- scripts/config --disable CONFIG_CPU_FREQ_GOV_USERSPACE
- scripts/config --disable CONFIG_CPU_FREQ_GOV_SCHEDUTIL
+ echo "Set PCIEASPM DRIVER to performance..."
+ scripts/config --enable CONFIG_PCIEASPM
+ scripts/config --enable CONFIG_PCIEASPM_PERFORMANCE
+ echo "Set CONFIG_PCIE_BUS for performance..."
+ scripts/config --enable CONFIG_PCIE_BUS_PERFORMANCE
+ fi
+
+ ### Selecting between tickless idle, perodic tics or full tickless
+ if [ "$_tickrate" = "perodic" ]; then
+ echo "Enabling periodic ticks..."
+ scripts/config --disable CONFIG_NO_HZ_IDLE
+ scripts/config --disable CONFIG_NO_HZ_FULL
+ scripts/config --disable CONFIG_NO_HZ
+ scripts/config --disable CONFIG_NO_HZ_COMMON
+ scripts/config --enable CONFIG_HZ_PERIODIC
+ elif [ "$_tickrate" = "idle" ]; then
+ echo "Enabling tickless idle..."
+ scripts/config --disable CONFIG_HZ_PERIODIC
+ scripts/config --disable CONFIG_NO_HZ_FULL
+ scripts/config --enable CONFIG_NO_HZ_IDLE
+ scripts/config --enable CONFIG_NO_HZ
+ scripts/config --enable CONFIG_NO_HZ_COMMON
+ elif [ "$_tickrate" = "full" ]; then
+ echo "Enabling tickless idle..."
+ scripts/config --disable CONFIG_HZ_PERIODIC
+ scripts/config --disable CONFIG_NO_HZ_IDLE
+ scripts/config --disable CONFIG_CONTEXT_TRACKING_FORCE
+ scripts/config --enable CONFIG_NO_HZ_FULL_NODEF
+ scripts/config --enable CONFIG_NO_HZ_FULL
+ scripts/config --enable CONFIG_NO_HZ
+ scripts/config --enable CONFIG_NO_HZ_COMMON
+ scripts/config --enable CONFIG_CONTEXT_TRACKING
fi
### Enable KBUILD_CFLAGS -O3
@@ -353,7 +389,6 @@ prepare() {
scripts/config --set-str CONFIG_DEFAULT_TCP_CONG bbr2
fi
-
### Enable FULLCONENAT
if [ -n "$_nf_cone" ]; then
echo "Enabling FULLCONENAT..."
@@ -363,7 +398,7 @@ prepare() {
### Enable SPF
if [ -n "$_spf_enable" ]; then
- echo "Enabling multigenerational LRU..."
+ echo "Enabling SPECULATIVE_PAGE_FAULT LRU..."
scripts/config --enable CONFIG_SPECULATIVE_PAGE_FAULT
fi
@@ -386,47 +421,52 @@ prepare() {
scripts/config --enable CONFIG_DAMON_RECLAIM
fi
- ### Selecting the ZSTD compression level
- if [ "$_zstd_level" = "ultra" ]; then
- echo "Enabling highest ZSTD compression ratio..."
- scripts/config --set-val CONFIG_KERNEL_ZSTD_LEVEL 19
- scripts/config --enable CONFIG_KERNEL_ZSTD_LEVEL_ULTRA
- elif [ "$_zstd_level" = "normal" ]; then
- echo "Enabling standard ZSTD compression ratio..."
- scripts/config --set-val CONFIG_KERNEL_ZSTD_LEVEL 19
- scripts/config --disable CONFIG_KERNEL_ZSTD_LEVEL_ULTRA
- else
- if [ -n "$_zstd_level" ]; then
- error "The value $_zstd_level is invalid. Choose the correct one again."
- else
- error "The value is empty. Choose the correct one again."
- fi
- error "Selecting the ZSTD compression level failed!"
- exit
- fi
-
- ### Selecting the ZSTD modules and kernel compression level
- if [ "$_zstd_level_value" = "ultra" ]; then
- echo "Enabling highest ZSTD modules compression ratio..."
- scripts/config --set-val CONFIG_MODULE_COMPRESS_ZSTD_LEVEL 19
- scripts/config --enable CONFIG_MODULE_COMPRESS_ZSTD_ULTRA
- scripts/config --set-val CONFIG_MODULE_COMPRESS_ZSTD_LEVEL_ULTRA 22
- echo "Enabling highest ZSTD kernel compression ratio..."
- scripts/config --set-val CONFIG_ZSTD_COMP_VAL 22
- elif [ "$_zstd_level_value" = "normal" ]; then
- echo "Enabling standard ZSTD modules compression ratio..."
- scripts/config --set-val CONFIG_MODULE_COMPRESS_ZSTD_LEVEL 19
- scripts/config --disable CONFIG_MODULE_COMPRESS_ZSTD_ULTRA
- echo "Enabling standard ZSTD kernel compression ratio..."
- scripts/config --set-val CONFIG_ZSTD_COMP_VAL 19
- else
- if [ -n "$_zstd_level_value" ]; then
- error "The value $_zstd_level_value is invalid. Choose the correct one again."
- else
- error "The value is empty. Choose the correct one again."
- fi
- error "Selecting the ZSTD modules and kernel compression level failed!"
- exit
+ ### Enable Linux Random Number Generator
+ if [ -n "$_lrng_enable" ]; then
+ echo "Enabling Linux Random Number Generator ..."
+ scripts/config --disable CONFIG_RANDOM_DEFAULT_IMPL
+ scripts/config --enable CONFIG_LRNG
+ scripts/config --enable CONFIG_LRNG_OVERSAMPLE_ENTROPY_SOURCES
+ scripts/config --set-val CONFIG_CONFIG_LRNG_OVERSAMPLE_ES_BITS 64
+ scripts/config --set-val CONFIG_LRNG_SEED_BUFFER_INIT_ADD_BITS 128
+ scripts/config --enable CONFIG_LRNG_IRQ
+ scripts/config --enable CONFIG_LRNG_CONTINUOUS_COMPRESSION_ENABLED
+ scripts/config --disable CONFIG_LRNG_CONTINUOUS_COMPRESSION_DISABLED
+ scripts/config --enable CONFIG_LRNG_ENABLE_CONTINUOUS_COMPRESSION
+ scripts/config --enable CONFIG_LRNG_SWITCHABLE_CONTINUOUS_COMPRESSION
+ scripts/config --disable CONFIG_LRNG_COLLECTION_SIZE_512
+ scripts/config --enable CONFIG_LRNG_COLLECTION_SIZE_1024
+ scripts/config --disable CONFIG_LRNG_COLLECTION_SIZE_2048
+ scripts/config --disable CONFIG_LRNG_COLLECTION_SIZE_4096
+ scripts/config --disable CONFIG_LRNG_COLLECTION_SIZE_8192
+ scripts/config --set-val CONFIG_LRNG_COLLECTION_SIZE 1024
+ scripts/config --enable CONFIG_LRNG_HEALTH_TESTS
+ scripts/config --set-val CONFIG_LRNG_RCT_CUTOFF 31
+ scripts/config --set-val CONFIG_LRNG_APT_CUTOFF 325
+ scripts/config --set-val CONFIG_LRNG_IRQ_ENTROPY_RATE 256
+ scripts/config --enable CONFIG_LRNG_JENT
+ scripts/config --set-val CONFIG_LRNG_JENT_ENTROPY_RATE 16
+ scripts/config --enable CONFIG_LRNG_CPU
+ scripts/config --set-val CONFIG_LRNG_CPU_ENTROPY_RATE 8
+ scripts/config --enable CONFIG_LRNG_DRNG_SWITCH
+ scripts/config --enable CONFIG_LRNG_KCAPI_HASH
+ scripts/config --module CONFIG_LRNG_DRBG
+ scripts/config --module CONFIG_LRNG_KCAPI
+ scripts/config --enable CONFIG_LRNG_TESTING_MENU
+ scripts/config --disable CONFIG_LRNG_RAW_HIRES_ENTROPY
+ scripts/config --disable CONFIG_LRNG_RAW_JIFFIES_ENTROPY
+ scripts/config --disable CONFIG_LRNG_RAW_IRQ_ENTROPY
+ scripts/config --disable CONFIG_LRNG_RAW_IRQFLAGS_ENTROPY
+ scripts/config --disable CONFIG_LRNG_RAW_RETIP_ENTROPY
+ scripts/config --disable CONFIG_LRNG_RAW_REGS_ENTROPY
+ scripts/config --disable CONFIG_LRNG_RAW_ARRAY
+ scripts/config --disable CONFIG_LRNG_IRQ_PERF
+ scripts/config --disable CONFIG_LRNG_ACVT_HASH
+ scripts/config --enable CONFIG_LRNG_RUNTIME_ES_CONFIG
+ scripts/config --disable CONFIG_LRNG_RUNTIME_MAX_WO_RESEED_CONFIG
+ scripts/config --disable CONFIG_LRNG_TEST_CPU_ES_COMPRESSION
+ scripts/config --enable CONFIG_LRNG_SELFTEST
+ scripts/config --disable CONFIG_LRNG_SELFTEST_PANIC
fi
### Enable zram/zswap ZSTD compression
@@ -441,13 +481,28 @@ prepare() {
scripts/config --set-str CONFIG_ZSWAP_COMPRESSOR_DEFAULT zstd
fi
- echo "Enable Anbox"
+ echo "Enable Anbox..."
scripts/config --enable CONFIG_ASHMEM
scripts/config --enable CONFIG_ANDROID
scripts/config --enable CONFIG_ANDROID_BINDER_IPC
scripts/config --enable CONFIG_ANDROID_BINDERFS
scripts/config --enable CONFIG_ANDROID_BINDER_DEVICES="binder,hwbinder,vndbinder"
+ echo "disable debugging features to reduce the size..."
+ scripts/config --disable CONFIG_DEBUG_INFO
+ scripts/config --disable CONFIG_CGROUP_BPF
+ scripts/config --disable CONFIG_BPF_LSM
+ scripts/config --disable CONFIG_BPF_PRELOAD
+ scripts/config --disable CONFIG_BPF_LIRC_MODE2
+ scripts/config --disable CONFIG_BPF_KPROBE_OVERRIDE
+ scripts/config --enable CONFIG_PSI_DEFAULT_DISABLED
+ scripts/config --disable CONFIG_LATENCYTOP
+ scripts/config --disable CONFIG_SCHED_DEBUG
+ scripts/config --disable CONFIG_KVM_WERROR
+
+ echo "Enable CONFIG_USER_NS_UNPRIVILEGED"
+ scripts/config --enable CONFIG_USER_NS
+
### Optionally use running kernel's config
# code originally by nous; http://aur.archlinux.org/packages.php?ID=40191
if [ -n "$_use_current" ]; then
diff --git a/linux-cachyos-tt/PKGBUILD b/linux-cachyos-tt/PKGBUILD
index 5c83bb99..eefad989 100644
--- a/linux-cachyos-tt/PKGBUILD
+++ b/linux-cachyos-tt/PKGBUILD
@@ -85,25 +85,6 @@ _use_auto_optimization=y
## Apply Kernel Optimization selecting
_use_optimization_select=
-### Selecting the ZSTD compression level
-# ATTENTION - one of two predefined values should be selected!
-# 'ultra' - highest compression ratio
-# 'normal' - standard compression ratio
-_zstd_level='normal'
-
-### Selecting the ZSTD module compression level
-# If you want to use ZSTD compression,
-# first install mkinitcpio-zstd:
-# https://gitlab.com/sirlucjan/lucjan-kernels/tree/master/depends
-# or
-# https://github.com/sirlucjan/lucjan-kernels/tree/master/depends
-# ATTENTION - one of two predefined values should be selected!
-# 'ultra' - highest compression ratio
-# 'normal' - standard compression ratio
-# WARNING: the ultra settings can sometimes
-# be counterproductive in both size and speed.
-_zstd_level_value='normal'
-
# Enable zram/zswap ZSTD compression
_zstd_compression=y
@@ -234,10 +215,12 @@ prepare() {
### Selecting the CPU scheduler
if [ "$_cpusched" = "bmq" ]; then
echo "Selecting BMQ CPU scheduler..."
+ scripts/config --enable CONFIG_SCHED_ALT
scripts/config --enable CONFIG_SCHED_BMQ
scripts/config --disable CONFIG_SCHED_PDS
elif [ "$_cpusched" = "pds" ]; then
echo "Selecting PDS CPU scheduler..."
+ scripts/config --enable CONFIG_SCHED_ALT
scripts/config --disable CONFIG_SCHED_BMQ
scripts/config --enable CONFIG_SCHED_PDS
elif [ "$_cpusched" = "cacule" ]; then
@@ -276,7 +259,7 @@ prepare() {
### Selecting the THIN or FULL-LTO compression level
if [ "$_use_llvm_lto" = "thin" ]; then
- echo "Enabling highest ZSTD compression ratio..."
+ echo "Enabling LLVM THIN LTO..."
scripts/config --disable LTO_NONE \
--enable LTO \
--enable LTO_CLANG \
@@ -286,7 +269,7 @@ prepare() {
--enable LTO_CLANG_THIN \
--enable HAVE_GCC_PLUGINS
elif [ "$_use_llvm_lto" = "full" ]; then
- echo "Enabling standard ZSTD compression ratio..."
+ echo "Enabling LLVM FULL LTO..."
scripts/config --disable LTO_NONE \
--enable LTO \
--enable LTO_CLANG \
@@ -294,14 +277,15 @@ prepare() {
--enable ARCH_SUPPORTS_LTO_CLANG_THIN \
--enable HAS_LTO_CLANG \
--enable LTO_CLANG \
+ --enable LTO_CLANG_FULL \
--enable HAVE_GCC_PLUGINS
else
scripts/config --enable CONFIG_LTO_NONE
fi
- ### Optionally set tickrate to 1000
+ ### Optionally set tickrate to 1000Hz
if [ -n "$_1k_HZ_ticks" ]; then
- echo "Setting tick rate to 1k..."
+ echo "Setting tick rate to 1k Hz..."
scripts/config --disable CONFIG_HZ_300
scripts/config --enable CONFIG_HZ_1000
scripts/config --set-val CONFIG_HZ 1000
@@ -309,7 +293,7 @@ prepare() {
### Optionally set tickrate to 750HZ
if [ -n "$_750_HZ_ticks" ]; then
- echo "Setting tick rate to 750HZ..."
+ echo "Setting tick rate to 750Hz..."
scripts/config --disable CONFIG_HZ_300
scripts/config --enable CONFIG_HZ_750
scripts/config --set-val CONFIG_HZ 750
@@ -317,7 +301,7 @@ prepare() {
### Optionally set tickrate to 600HZ
if [ -n "$_600_HZ_ticks" ]; then
- echo "Setting tick rate to 600HZ..."
+ echo "Setting tick rate to 600Hz..."
scripts/config --disable CONFIG_HZ_300
scripts/config --enable CONFIG_HZ_600
scripts/config --set-val CONFIG_HZ 600
@@ -325,7 +309,7 @@ prepare() {
### Optionally set tickrate to 500HZ
if [ -n "$_500_HZ_ticks" ]; then
- echo "Setting tick rate to 500HZ..."
+ echo "Setting tick rate to 500Hz..."
scripts/config --disable CONFIG_HZ_300
scripts/config --enable CONFIG_HZ_500
scripts/config --set-val CONFIG_HZ 500
@@ -498,49 +482,6 @@ prepare() {
scripts/config --disable CONFIG_LRNG_SELFTEST_PANIC
fi
- ### Selecting the ZSTD compression level
- if [ "$_zstd_level" = "ultra" ]; then
- echo "Enabling highest ZSTD compression ratio..."
- scripts/config --set-val CONFIG_KERNEL_ZSTD_LEVEL 19
- scripts/config --enable CONFIG_KERNEL_ZSTD_LEVEL_ULTRA
- elif [ "$_zstd_level" = "normal" ]; then
- echo "Enabling standard ZSTD compression ratio..."
- scripts/config --set-val CONFIG_KERNEL_ZSTD_LEVEL 19
- scripts/config --disable CONFIG_KERNEL_ZSTD_LEVEL_ULTRA
- else
- if [ -n "$_zstd_level" ]; then
- error "The value $_zstd_level is invalid. Choose the correct one again."
- else
- error "The value is empty. Choose the correct one again."
- fi
- error "Selecting the ZSTD compression level failed!"
- exit
- fi
-
- ### Selecting the ZSTD modules and kernel compression level
- if [ "$_zstd_level_value" = "ultra" ]; then
- echo "Enabling highest ZSTD modules compression ratio..."
- scripts/config --set-val CONFIG_MODULE_COMPRESS_ZSTD_LEVEL 19
- scripts/config --enable CONFIG_MODULE_COMPRESS_ZSTD_ULTRA
- scripts/config --set-val CONFIG_MODULE_COMPRESS_ZSTD_LEVEL_ULTRA 22
- echo "Enabling highest ZSTD kernel compression ratio..."
- scripts/config --set-val CONFIG_ZSTD_COMP_VAL 22
- elif [ "$_zstd_level_value" = "normal" ]; then
- echo "Enabling standard ZSTD modules compression ratio..."
- scripts/config --set-val CONFIG_MODULE_COMPRESS_ZSTD_LEVEL 19
- scripts/config --disable CONFIG_MODULE_COMPRESS_ZSTD_ULTRA
- echo "Enabling standard ZSTD kernel compression ratio..."
- scripts/config --set-val CONFIG_ZSTD_COMP_VAL 19
- else
- if [ -n "$_zstd_level_value" ]; then
- error "The value $_zstd_level_value is invalid. Choose the correct one again."
- else
- error "The value is empty. Choose the correct one again."
- fi
- error "Selecting the ZSTD modules and kernel compression level failed!"
- exit
- fi
-
### Enable zram/zswap ZSTD compression
if [ -n "$_zstd_swap_compression" ]; then
echo "Enabling zram ZSTD compression..."
diff --git a/linux-cachyos/PKGBUILD b/linux-cachyos/PKGBUILD
index ed99eb35..98c2bc0b 100644
--- a/linux-cachyos/PKGBUILD
+++ b/linux-cachyos/PKGBUILD
@@ -85,25 +85,6 @@ _use_auto_optimization=y
## Apply Kernel Optimization selecting
_use_optimization_select=
-### Selecting the ZSTD compression level
-# ATTENTION - one of two predefined values should be selected!
-# 'ultra' - highest compression ratio
-# 'normal' - standard compression ratio
-_zstd_level='normal'
-
-### Selecting the ZSTD module compression level
-# If you want to use ZSTD compression,
-# first install mkinitcpio-zstd:
-# https://gitlab.com/sirlucjan/lucjan-kernels/tree/master/depends
-# or
-# https://github.com/sirlucjan/lucjan-kernels/tree/master/depends
-# ATTENTION - one of two predefined values should be selected!
-# 'ultra' - highest compression ratio
-# 'normal' - standard compression ratio
-# WARNING: the ultra settings can sometimes
-# be counterproductive in both size and speed.
-_zstd_level_value='normal'
-
# Enable zram/zswap ZSTD compression
_zstd_compression=y
@@ -234,10 +215,12 @@ prepare() {
### Selecting the CPU scheduler
if [ "$_cpusched" = "bmq" ]; then
echo "Selecting BMQ CPU scheduler..."
+ scripts/config --enable CONFIG_SCHED_ALT
scripts/config --enable CONFIG_SCHED_BMQ
scripts/config --disable CONFIG_SCHED_PDS
elif [ "$_cpusched" = "pds" ]; then
echo "Selecting PDS CPU scheduler..."
+ scripts/config --enable CONFIG_SCHED_ALT
scripts/config --disable CONFIG_SCHED_BMQ
scripts/config --enable CONFIG_SCHED_PDS
elif [ "$_cpusched" = "cacule" ]; then
@@ -276,7 +259,7 @@ prepare() {
### Selecting the THIN or FULL-LTO compression level
if [ "$_use_llvm_lto" = "thin" ]; then
- echo "Enabling highest ZSTD compression ratio..."
+ echo "Enabling LLVM THIN LTO..."
scripts/config --disable LTO_NONE \
--enable LTO \
--enable LTO_CLANG \
@@ -286,7 +269,7 @@ prepare() {
--enable LTO_CLANG_THIN \
--enable HAVE_GCC_PLUGINS
elif [ "$_use_llvm_lto" = "full" ]; then
- echo "Enabling standard ZSTD compression ratio..."
+ echo "Enabling LLVM FULL LTO..."
scripts/config --disable LTO_NONE \
--enable LTO \
--enable LTO_CLANG \
@@ -294,14 +277,15 @@ prepare() {
--enable ARCH_SUPPORTS_LTO_CLANG_THIN \
--enable HAS_LTO_CLANG \
--enable LTO_CLANG \
+ --enable LTO_CLANG_FULL \
--enable HAVE_GCC_PLUGINS
else
scripts/config --enable CONFIG_LTO_NONE
fi
- ### Optionally set tickrate to 1000
+ ### Optionally set tickrate to 1000Hz
if [ -n "$_1k_HZ_ticks" ]; then
- echo "Setting tick rate to 1k..."
+ echo "Setting tick rate to 1k Hz..."
scripts/config --disable CONFIG_HZ_300
scripts/config --enable CONFIG_HZ_1000
scripts/config --set-val CONFIG_HZ 1000
@@ -309,7 +293,7 @@ prepare() {
### Optionally set tickrate to 750HZ
if [ -n "$_750_HZ_ticks" ]; then
- echo "Setting tick rate to 750HZ..."
+ echo "Setting tick rate to 750Hz..."
scripts/config --disable CONFIG_HZ_300
scripts/config --enable CONFIG_HZ_750
scripts/config --set-val CONFIG_HZ 750
@@ -317,7 +301,7 @@ prepare() {
### Optionally set tickrate to 600HZ
if [ -n "$_600_HZ_ticks" ]; then
- echo "Setting tick rate to 600HZ..."
+ echo "Setting tick rate to 600Hz..."
scripts/config --disable CONFIG_HZ_300
scripts/config --enable CONFIG_HZ_600
scripts/config --set-val CONFIG_HZ 600
@@ -325,7 +309,7 @@ prepare() {
### Optionally set tickrate to 500HZ
if [ -n "$_500_HZ_ticks" ]; then
- echo "Setting tick rate to 500HZ..."
+ echo "Setting tick rate to 500Hz..."
scripts/config --disable CONFIG_HZ_300
scripts/config --enable CONFIG_HZ_500
scripts/config --set-val CONFIG_HZ 500
@@ -498,49 +482,6 @@ prepare() {
scripts/config --disable CONFIG_LRNG_SELFTEST_PANIC
fi
- ### Selecting the ZSTD compression level
- if [ "$_zstd_level" = "ultra" ]; then
- echo "Enabling highest ZSTD compression ratio..."
- scripts/config --set-val CONFIG_KERNEL_ZSTD_LEVEL 19
- scripts/config --enable CONFIG_KERNEL_ZSTD_LEVEL_ULTRA
- elif [ "$_zstd_level" = "normal" ]; then
- echo "Enabling standard ZSTD compression ratio..."
- scripts/config --set-val CONFIG_KERNEL_ZSTD_LEVEL 19
- scripts/config --disable CONFIG_KERNEL_ZSTD_LEVEL_ULTRA
- else
- if [ -n "$_zstd_level" ]; then
- error "The value $_zstd_level is invalid. Choose the correct one again."
- else
- error "The value is empty. Choose the correct one again."
- fi
- error "Selecting the ZSTD compression level failed!"
- exit
- fi
-
- ### Selecting the ZSTD modules and kernel compression level
- if [ "$_zstd_level_value" = "ultra" ]; then
- echo "Enabling highest ZSTD modules compression ratio..."
- scripts/config --set-val CONFIG_MODULE_COMPRESS_ZSTD_LEVEL 19
- scripts/config --enable CONFIG_MODULE_COMPRESS_ZSTD_ULTRA
- scripts/config --set-val CONFIG_MODULE_COMPRESS_ZSTD_LEVEL_ULTRA 22
- echo "Enabling highest ZSTD kernel compression ratio..."
- scripts/config --set-val CONFIG_ZSTD_COMP_VAL 22
- elif [ "$_zstd_level_value" = "normal" ]; then
- echo "Enabling standard ZSTD modules compression ratio..."
- scripts/config --set-val CONFIG_MODULE_COMPRESS_ZSTD_LEVEL 19
- scripts/config --disable CONFIG_MODULE_COMPRESS_ZSTD_ULTRA
- echo "Enabling standard ZSTD kernel compression ratio..."
- scripts/config --set-val CONFIG_ZSTD_COMP_VAL 19
- else
- if [ -n "$_zstd_level_value" ]; then
- error "The value $_zstd_level_value is invalid. Choose the correct one again."
- else
- error "The value is empty. Choose the correct one again."
- fi
- error "Selecting the ZSTD modules and kernel compression level failed!"
- exit
- fi
-
### Enable zram/zswap ZSTD compression
if [ -n "$_zstd_swap_compression" ]; then
echo "Enabling zram ZSTD compression..."
diff --git a/linux-cacule-rdb/PKGBUILD b/linux-cacule-rdb/PKGBUILD
index a5704eee..d73e3987 100644
--- a/linux-cacule-rdb/PKGBUILD
+++ b/linux-cacule-rdb/PKGBUILD
@@ -85,25 +85,6 @@ _use_auto_optimization=y
## Apply Kernel Optimization selecting
_use_optimization_select=
-### Selecting the ZSTD compression level
-# ATTENTION - one of two predefined values should be selected!
-# 'ultra' - highest compression ratio
-# 'normal' - standard compression ratio
-_zstd_level='normal'
-
-### Selecting the ZSTD module compression level
-# If you want to use ZSTD compression,
-# first install mkinitcpio-zstd:
-# https://gitlab.com/sirlucjan/lucjan-kernels/tree/master/depends
-# or
-# https://github.com/sirlucjan/lucjan-kernels/tree/master/depends
-# ATTENTION - one of two predefined values should be selected!
-# 'ultra' - highest compression ratio
-# 'normal' - standard compression ratio
-# WARNING: the ultra settings can sometimes
-# be counterproductive in both size and speed.
-_zstd_level_value='normal'
-
# Enable zram/zswap ZSTD compression
_zstd_compression=y
@@ -234,10 +215,12 @@ prepare() {
### Selecting the CPU scheduler
if [ "$_cpusched" = "bmq" ]; then
echo "Selecting BMQ CPU scheduler..."
+ scripts/config --enable CONFIG_SCHED_ALT
scripts/config --enable CONFIG_SCHED_BMQ
scripts/config --disable CONFIG_SCHED_PDS
elif [ "$_cpusched" = "pds" ]; then
echo "Selecting PDS CPU scheduler..."
+ scripts/config --enable CONFIG_SCHED_ALT
scripts/config --disable CONFIG_SCHED_BMQ
scripts/config --enable CONFIG_SCHED_PDS
elif [ "$_cpusched" = "cacule" ]; then
@@ -276,7 +259,7 @@ prepare() {
### Selecting the THIN or FULL-LTO compression level
if [ "$_use_llvm_lto" = "thin" ]; then
- echo "Enabling highest ZSTD compression ratio..."
+ echo "Enabling LLVM THIN LTO..."
scripts/config --disable LTO_NONE \
--enable LTO \
--enable LTO_CLANG \
@@ -286,7 +269,7 @@ prepare() {
--enable LTO_CLANG_THIN \
--enable HAVE_GCC_PLUGINS
elif [ "$_use_llvm_lto" = "full" ]; then
- echo "Enabling standard ZSTD compression ratio..."
+ echo "Enabling LLVM FULL LTO..."
scripts/config --disable LTO_NONE \
--enable LTO \
--enable LTO_CLANG \
@@ -294,14 +277,15 @@ prepare() {
--enable ARCH_SUPPORTS_LTO_CLANG_THIN \
--enable HAS_LTO_CLANG \
--enable LTO_CLANG \
+ --enable LTO_CLANG_FULL \
--enable HAVE_GCC_PLUGINS
else
scripts/config --enable CONFIG_LTO_NONE
fi
- ### Optionally set tickrate to 1000
+ ### Optionally set tickrate to 1000Hz
if [ -n "$_1k_HZ_ticks" ]; then
- echo "Setting tick rate to 1k..."
+ echo "Setting tick rate to 1k Hz..."
scripts/config --disable CONFIG_HZ_300
scripts/config --enable CONFIG_HZ_1000
scripts/config --set-val CONFIG_HZ 1000
@@ -309,7 +293,7 @@ prepare() {
### Optionally set tickrate to 750HZ
if [ -n "$_750_HZ_ticks" ]; then
- echo "Setting tick rate to 750HZ..."
+ echo "Setting tick rate to 750Hz..."
scripts/config --disable CONFIG_HZ_300
scripts/config --enable CONFIG_HZ_750
scripts/config --set-val CONFIG_HZ 750
@@ -317,7 +301,7 @@ prepare() {
### Optionally set tickrate to 600HZ
if [ -n "$_600_HZ_ticks" ]; then
- echo "Setting tick rate to 600HZ..."
+ echo "Setting tick rate to 600Hz..."
scripts/config --disable CONFIG_HZ_300
scripts/config --enable CONFIG_HZ_600
scripts/config --set-val CONFIG_HZ 600
@@ -325,7 +309,7 @@ prepare() {
### Optionally set tickrate to 500HZ
if [ -n "$_500_HZ_ticks" ]; then
- echo "Setting tick rate to 500HZ..."
+ echo "Setting tick rate to 500Hz..."
scripts/config --disable CONFIG_HZ_300
scripts/config --enable CONFIG_HZ_500
scripts/config --set-val CONFIG_HZ 500
@@ -498,49 +482,6 @@ prepare() {
scripts/config --disable CONFIG_LRNG_SELFTEST_PANIC
fi
- ### Selecting the ZSTD compression level
- if [ "$_zstd_level" = "ultra" ]; then
- echo "Enabling highest ZSTD compression ratio..."
- scripts/config --set-val CONFIG_KERNEL_ZSTD_LEVEL 19
- scripts/config --enable CONFIG_KERNEL_ZSTD_LEVEL_ULTRA
- elif [ "$_zstd_level" = "normal" ]; then
- echo "Enabling standard ZSTD compression ratio..."
- scripts/config --set-val CONFIG_KERNEL_ZSTD_LEVEL 19
- scripts/config --disable CONFIG_KERNEL_ZSTD_LEVEL_ULTRA
- else
- if [ -n "$_zstd_level" ]; then
- error "The value $_zstd_level is invalid. Choose the correct one again."
- else
- error "The value is empty. Choose the correct one again."
- fi
- error "Selecting the ZSTD compression level failed!"
- exit
- fi
-
- ### Selecting the ZSTD modules and kernel compression level
- if [ "$_zstd_level_value" = "ultra" ]; then
- echo "Enabling highest ZSTD modules compression ratio..."
- scripts/config --set-val CONFIG_MODULE_COMPRESS_ZSTD_LEVEL 19
- scripts/config --enable CONFIG_MODULE_COMPRESS_ZSTD_ULTRA
- scripts/config --set-val CONFIG_MODULE_COMPRESS_ZSTD_LEVEL_ULTRA 22
- echo "Enabling highest ZSTD kernel compression ratio..."
- scripts/config --set-val CONFIG_ZSTD_COMP_VAL 22
- elif [ "$_zstd_level_value" = "normal" ]; then
- echo "Enabling standard ZSTD modules compression ratio..."
- scripts/config --set-val CONFIG_MODULE_COMPRESS_ZSTD_LEVEL 19
- scripts/config --disable CONFIG_MODULE_COMPRESS_ZSTD_ULTRA
- echo "Enabling standard ZSTD kernel compression ratio..."
- scripts/config --set-val CONFIG_ZSTD_COMP_VAL 19
- else
- if [ -n "$_zstd_level_value" ]; then
- error "The value $_zstd_level_value is invalid. Choose the correct one again."
- else
- error "The value is empty. Choose the correct one again."
- fi
- error "Selecting the ZSTD modules and kernel compression level failed!"
- exit
- fi
-
### Enable zram/zswap ZSTD compression
if [ -n "$_zstd_swap_compression" ]; then
echo "Enabling zram ZSTD compression..."
diff --git a/linux-cacule/PKGBUILD b/linux-cacule/PKGBUILD
index 76a73498..7f7955a0 100644
--- a/linux-cacule/PKGBUILD
+++ b/linux-cacule/PKGBUILD
@@ -85,25 +85,6 @@ _use_auto_optimization=y
## Apply Kernel Optimization selecting
_use_optimization_select=
-### Selecting the ZSTD compression level
-# ATTENTION - one of two predefined values should be selected!
-# 'ultra' - highest compression ratio
-# 'normal' - standard compression ratio
-_zstd_level='normal'
-
-### Selecting the ZSTD module compression level
-# If you want to use ZSTD compression,
-# first install mkinitcpio-zstd:
-# https://gitlab.com/sirlucjan/lucjan-kernels/tree/master/depends
-# or
-# https://github.com/sirlucjan/lucjan-kernels/tree/master/depends
-# ATTENTION - one of two predefined values should be selected!
-# 'ultra' - highest compression ratio
-# 'normal' - standard compression ratio
-# WARNING: the ultra settings can sometimes
-# be counterproductive in both size and speed.
-_zstd_level_value='normal'
-
# Enable zram/zswap ZSTD compression
_zstd_compression=y
@@ -233,10 +214,12 @@ prepare() {
### Selecting the CPU scheduler
if [ "$_cpusched" = "bmq" ]; then
echo "Selecting BMQ CPU scheduler..."
+ scripts/config --enable CONFIG_SCHED_ALT
scripts/config --enable CONFIG_SCHED_BMQ
scripts/config --disable CONFIG_SCHED_PDS
elif [ "$_cpusched" = "pds" ]; then
echo "Selecting PDS CPU scheduler..."
+ scripts/config --enable CONFIG_SCHED_ALT
scripts/config --disable CONFIG_SCHED_BMQ
scripts/config --enable CONFIG_SCHED_PDS
elif [ "$_cpusched" = "cacule" ]; then
@@ -275,7 +258,7 @@ prepare() {
### Selecting the THIN or FULL-LTO compression level
if [ "$_use_llvm_lto" = "thin" ]; then
- echo "Enabling highest ZSTD compression ratio..."
+ echo "Enabling LLVM THIN LTO..."
scripts/config --disable LTO_NONE \
--enable LTO \
--enable LTO_CLANG \
@@ -285,7 +268,7 @@ prepare() {
--enable LTO_CLANG_THIN \
--enable HAVE_GCC_PLUGINS
elif [ "$_use_llvm_lto" = "full" ]; then
- echo "Enabling standard ZSTD compression ratio..."
+ echo "Enabling LLVM FULL LTO..."
scripts/config --disable LTO_NONE \
--enable LTO \
--enable LTO_CLANG \
@@ -293,14 +276,15 @@ prepare() {
--enable ARCH_SUPPORTS_LTO_CLANG_THIN \
--enable HAS_LTO_CLANG \
--enable LTO_CLANG \
+ --enable LTO_CLANG_FULL \
--enable HAVE_GCC_PLUGINS
else
scripts/config --enable CONFIG_LTO_NONE
fi
- ### Optionally set tickrate to 1000
+ ### Optionally set tickrate to 1000Hz
if [ -n "$_1k_HZ_ticks" ]; then
- echo "Setting tick rate to 1k..."
+ echo "Setting tick rate to 1k Hz..."
scripts/config --disable CONFIG_HZ_300
scripts/config --enable CONFIG_HZ_1000
scripts/config --set-val CONFIG_HZ 1000
@@ -308,7 +292,7 @@ prepare() {
### Optionally set tickrate to 750HZ
if [ -n "$_750_HZ_ticks" ]; then
- echo "Setting tick rate to 750HZ..."
+ echo "Setting tick rate to 750Hz..."
scripts/config --disable CONFIG_HZ_300
scripts/config --enable CONFIG_HZ_750
scripts/config --set-val CONFIG_HZ 750
@@ -316,7 +300,7 @@ prepare() {
### Optionally set tickrate to 600HZ
if [ -n "$_600_HZ_ticks" ]; then
- echo "Setting tick rate to 600HZ..."
+ echo "Setting tick rate to 600Hz..."
scripts/config --disable CONFIG_HZ_300
scripts/config --enable CONFIG_HZ_600
scripts/config --set-val CONFIG_HZ 600
@@ -324,7 +308,7 @@ prepare() {
### Optionally set tickrate to 500HZ
if [ -n "$_500_HZ_ticks" ]; then
- echo "Setting tick rate to 500HZ..."
+ echo "Setting tick rate to 500Hz..."
scripts/config --disable CONFIG_HZ_300
scripts/config --enable CONFIG_HZ_500
scripts/config --set-val CONFIG_HZ 500
@@ -497,49 +481,6 @@ prepare() {
scripts/config --disable CONFIG_LRNG_SELFTEST_PANIC
fi
- ### Selecting the ZSTD compression level
- if [ "$_zstd_level" = "ultra" ]; then
- echo "Enabling highest ZSTD compression ratio..."
- scripts/config --set-val CONFIG_KERNEL_ZSTD_LEVEL 19
- scripts/config --enable CONFIG_KERNEL_ZSTD_LEVEL_ULTRA
- elif [ "$_zstd_level" = "normal" ]; then
- echo "Enabling standard ZSTD compression ratio..."
- scripts/config --set-val CONFIG_KERNEL_ZSTD_LEVEL 19
- scripts/config --disable CONFIG_KERNEL_ZSTD_LEVEL_ULTRA
- else
- if [ -n "$_zstd_level" ]; then
- error "The value $_zstd_level is invalid. Choose the correct one again."
- else
- error "The value is empty. Choose the correct one again."
- fi
- error "Selecting the ZSTD compression level failed!"
- exit
- fi
-
- ### Selecting the ZSTD modules and kernel compression level
- if [ "$_zstd_level_value" = "ultra" ]; then
- echo "Enabling highest ZSTD modules compression ratio..."
- scripts/config --set-val CONFIG_MODULE_COMPRESS_ZSTD_LEVEL 19
- scripts/config --enable CONFIG_MODULE_COMPRESS_ZSTD_ULTRA
- scripts/config --set-val CONFIG_MODULE_COMPRESS_ZSTD_LEVEL_ULTRA 22
- echo "Enabling highest ZSTD kernel compression ratio..."
- scripts/config --set-val CONFIG_ZSTD_COMP_VAL 22
- elif [ "$_zstd_level_value" = "normal" ]; then
- echo "Enabling standard ZSTD modules compression ratio..."
- scripts/config --set-val CONFIG_MODULE_COMPRESS_ZSTD_LEVEL 19
- scripts/config --disable CONFIG_MODULE_COMPRESS_ZSTD_ULTRA
- echo "Enabling standard ZSTD kernel compression ratio..."
- scripts/config --set-val CONFIG_ZSTD_COMP_VAL 19
- else
- if [ -n "$_zstd_level_value" ]; then
- error "The value $_zstd_level_value is invalid. Choose the correct one again."
- else
- error "The value is empty. Choose the correct one again."
- fi
- error "Selecting the ZSTD modules and kernel compression level failed!"
- exit
- fi
-
### Enable zram/zswap ZSTD compression
if [ -n "$_zstd_swap_compression" ]; then
echo "Enabling zram ZSTD compression..."
diff --git a/linux-tt/PKGBUILD b/linux-tt/PKGBUILD
index d8334708..4cb44e14 100644
--- a/linux-tt/PKGBUILD
+++ b/linux-tt/PKGBUILD
@@ -85,25 +85,6 @@ _use_auto_optimization=y
## Apply Kernel Optimization selecting
_use_optimization_select=
-### Selecting the ZSTD compression level
-# ATTENTION - one of two predefined values should be selected!
-# 'ultra' - highest compression ratio
-# 'normal' - standard compression ratio
-_zstd_level='normal'
-
-### Selecting the ZSTD module compression level
-# If you want to use ZSTD compression,
-# first install mkinitcpio-zstd:
-# https://gitlab.com/sirlucjan/lucjan-kernels/tree/master/depends
-# or
-# https://github.com/sirlucjan/lucjan-kernels/tree/master/depends
-# ATTENTION - one of two predefined values should be selected!
-# 'ultra' - highest compression ratio
-# 'normal' - standard compression ratio
-# WARNING: the ultra settings can sometimes
-# be counterproductive in both size and speed.
-_zstd_level_value='normal'
-
# Enable zram/zswap ZSTD compression
_zstd_compression=y
@@ -234,10 +215,12 @@ prepare() {
### Selecting the CPU scheduler
if [ "$_cpusched" = "bmq" ]; then
echo "Selecting BMQ CPU scheduler..."
+ scripts/config --enable CONFIG_SCHED_ALT
scripts/config --enable CONFIG_SCHED_BMQ
scripts/config --disable CONFIG_SCHED_PDS
elif [ "$_cpusched" = "pds" ]; then
echo "Selecting PDS CPU scheduler..."
+ scripts/config --enable CONFIG_SCHED_ALT
scripts/config --disable CONFIG_SCHED_BMQ
scripts/config --enable CONFIG_SCHED_PDS
elif [ "$_cpusched" = "cacule" ]; then
@@ -276,7 +259,7 @@ prepare() {
### Selecting the THIN or FULL-LTO compression level
if [ "$_use_llvm_lto" = "thin" ]; then
- echo "Enabling highest ZSTD compression ratio..."
+ echo "Enabling LLVM THIN LTO..."
scripts/config --disable LTO_NONE \
--enable LTO \
--enable LTO_CLANG \
@@ -286,7 +269,7 @@ prepare() {
--enable LTO_CLANG_THIN \
--enable HAVE_GCC_PLUGINS
elif [ "$_use_llvm_lto" = "full" ]; then
- echo "Enabling standard ZSTD compression ratio..."
+ echo "Enabling LLVM FULL LTO..."
scripts/config --disable LTO_NONE \
--enable LTO \
--enable LTO_CLANG \
@@ -294,14 +277,15 @@ prepare() {
--enable ARCH_SUPPORTS_LTO_CLANG_THIN \
--enable HAS_LTO_CLANG \
--enable LTO_CLANG \
+ --enable LTO_CLANG_FULL \
--enable HAVE_GCC_PLUGINS
else
scripts/config --enable CONFIG_LTO_NONE
fi
- ### Optionally set tickrate to 1000
+ ### Optionally set tickrate to 1000Hz
if [ -n "$_1k_HZ_ticks" ]; then
- echo "Setting tick rate to 1k..."
+ echo "Setting tick rate to 1k Hz..."
scripts/config --disable CONFIG_HZ_300
scripts/config --enable CONFIG_HZ_1000
scripts/config --set-val CONFIG_HZ 1000
@@ -309,7 +293,7 @@ prepare() {
### Optionally set tickrate to 750HZ
if [ -n "$_750_HZ_ticks" ]; then
- echo "Setting tick rate to 750HZ..."
+ echo "Setting tick rate to 750Hz..."
scripts/config --disable CONFIG_HZ_300
scripts/config --enable CONFIG_HZ_750
scripts/config --set-val CONFIG_HZ 750
@@ -317,7 +301,7 @@ prepare() {
### Optionally set tickrate to 600HZ
if [ -n "$_600_HZ_ticks" ]; then
- echo "Setting tick rate to 600HZ..."
+ echo "Setting tick rate to 600Hz..."
scripts/config --disable CONFIG_HZ_300
scripts/config --enable CONFIG_HZ_600
scripts/config --set-val CONFIG_HZ 600
@@ -325,7 +309,7 @@ prepare() {
### Optionally set tickrate to 500HZ
if [ -n "$_500_HZ_ticks" ]; then
- echo "Setting tick rate to 500HZ..."
+ echo "Setting tick rate to 500Hz..."
scripts/config --disable CONFIG_HZ_300
scripts/config --enable CONFIG_HZ_500
scripts/config --set-val CONFIG_HZ 500
@@ -498,49 +482,6 @@ prepare() {
scripts/config --disable CONFIG_LRNG_SELFTEST_PANIC
fi
- ### Selecting the ZSTD compression level
- if [ "$_zstd_level" = "ultra" ]; then
- echo "Enabling highest ZSTD compression ratio..."
- scripts/config --set-val CONFIG_KERNEL_ZSTD_LEVEL 19
- scripts/config --enable CONFIG_KERNEL_ZSTD_LEVEL_ULTRA
- elif [ "$_zstd_level" = "normal" ]; then
- echo "Enabling standard ZSTD compression ratio..."
- scripts/config --set-val CONFIG_KERNEL_ZSTD_LEVEL 19
- scripts/config --disable CONFIG_KERNEL_ZSTD_LEVEL_ULTRA
- else
- if [ -n "$_zstd_level" ]; then
- error "The value $_zstd_level is invalid. Choose the correct one again."
- else
- error "The value is empty. Choose the correct one again."
- fi
- error "Selecting the ZSTD compression level failed!"
- exit
- fi
-
- ### Selecting the ZSTD modules and kernel compression level
- if [ "$_zstd_level_value" = "ultra" ]; then
- echo "Enabling highest ZSTD modules compression ratio..."
- scripts/config --set-val CONFIG_MODULE_COMPRESS_ZSTD_LEVEL 19
- scripts/config --enable CONFIG_MODULE_COMPRESS_ZSTD_ULTRA
- scripts/config --set-val CONFIG_MODULE_COMPRESS_ZSTD_LEVEL_ULTRA 22
- echo "Enabling highest ZSTD kernel compression ratio..."
- scripts/config --set-val CONFIG_ZSTD_COMP_VAL 22
- elif [ "$_zstd_level_value" = "normal" ]; then
- echo "Enabling standard ZSTD modules compression ratio..."
- scripts/config --set-val CONFIG_MODULE_COMPRESS_ZSTD_LEVEL 19
- scripts/config --disable CONFIG_MODULE_COMPRESS_ZSTD_ULTRA
- echo "Enabling standard ZSTD kernel compression ratio..."
- scripts/config --set-val CONFIG_ZSTD_COMP_VAL 19
- else
- if [ -n "$_zstd_level_value" ]; then
- error "The value $_zstd_level_value is invalid. Choose the correct one again."
- else
- error "The value is empty. Choose the correct one again."
- fi
- error "Selecting the ZSTD modules and kernel compression level failed!"
- exit
- fi
-
### Enable zram/zswap ZSTD compression
if [ -n "$_zstd_swap_compression" ]; then
echo "Enabling zram ZSTD compression..."