Skip to content

Archlinux Kernel based on different schedulers and some other performance improvements.

Use ${parameter-default} instead of ${parameter=default}

Vasiliy Stelmachenokdcc0469a2cfa
diff --git a/linux-bore/PKGBUILD b/linux-bore/PKGBUILD
index f61bddd8..12af864d 100644
--- a/linux-bore/PKGBUILD
+++ b/linux-bore/PKGBUILD
@@ -7,7 +7,7 @@
# ATTENTION - one of two predefined values should be selected!
# 'yes' - enable CachyOS config
# 'no' - disable CachyOS config
-_cachy_config=${_cachy_config='yes'}
+_cachy_config=${_cachy_config-'yes'}
### Selecting the CPU scheduler
# ATTENTION - one of seven predefined values should be selected!
@@ -19,27 +19,27 @@ _cachy_config=${_cachy_config='yes'}
# 'cfs' - select 'Completely Fair Scheduler'
# 'tt' - select 'Task Type Scheduler by Hamad Marri'
# 'hardened' - select 'BORE Scheduler hardened' ## kernel with hardened config and hardening patches with the bore scheduler
-_cpusched=${_cpusched='bore'}
+_cpusched=${_cpusched-'bore'}
### BUILD OPTIONS
# Set these variables to ANYTHING that is not null to enable them
### Tweak kernel options prior to a build via nconfig
-_makenconfig=${_makenconfig=}
+_makenconfig=${_makenconfig-}
### Tweak kernel options prior to a build via menuconfig
-_makemenuconfig=${_makemenuconfig=}
+_makemenuconfig=${_makemenuconfig-}
### Tweak kernel options prior to a build via xconfig
-_makexconfig=${_makexconfig=}
+_makexconfig=${_makexconfig-}
### Tweak kernel options prior to a build via gconfig
-_makegconfig=${_makegconfig=}
+_makegconfig=${_makegconfig-}
# NUMA is optimized for multi-socket motherboards.
# A single multi-core CPU actually runs slower with NUMA enabled.
# See, https://bugs.archlinux.org/task/31187
-_NUMAdisable=${_NUMAdisable=y}
+_NUMAdisable=${_NUMAdisable-y}
# Compile ONLY used modules to VASTLYreduce the number of modules built
# and the build time.
@@ -49,62 +49,62 @@ _NUMAdisable=${_NUMAdisable=y}
# This PKGBUILD read the database kept if it exists
#
# More at this wiki page ---> https://wiki.archlinux.org/index.php/Modprobed-db
-_localmodcfg=${_localmodcfg=}
+_localmodcfg=${_localmodcfg-}
# Use the current kernel's .config file
# Enabling this option will use the .config of the RUNNING kernel rather than
# the ARCH defaults. Useful when the package gets updated and you already went
# through the trouble of customizing your config options. NOT recommended when
# a new kernel is released, but again, convenient for package bumps.
-_use_current=${_use_current=}
+_use_current=${_use_current-}
### Enable KBUILD_CFLAGS -O3
-_cc_harder=${_cc_harder=y}
+_cc_harder=${_cc_harder-y}
### Set this to your number of threads you have in your machine otherwise it will default to 128
-_nr_cpus=${_nr_cpus=}
+_nr_cpus=${_nr_cpus-}
### Set performance governor as default
-_per_gov=${_per_gov=y}
+_per_gov=${_per_gov-y}
### Enable TCP_CONG_BBR2
_tcp_bbr2=${_tcp_bbr2=y}
### Running with a 1000HZ, 750Hz, 600 Hz, 500Hz, 300Hz, 250Hz and 100Hz tick rate
-_HZ_ticks=${_HZ_ticks=750}
+_HZ_ticks=${_HZ_ticks-750}
## Choose between perodic, idle or full
### Full tickless can give higher performances in various cases but, depending on hardware, lower consistency.
-_tickrate=${_tickrate=full}
+_tickrate=${_tickrate-full}
## Choose between full(low-latency), voluntary or server
-_preempt=${_preempt=full}
+_preempt=${_preempt-full}
### Disable MQ-Deadline I/O scheduler
-_mq_deadline_disable=${_mq_deadline_disable=y}
+_mq_deadline_disable=${_mq_deadline_disable-y}
### Disable Kyber I/O scheduler
-_kyber_disable=${_kyber_disable=y}
+_kyber_disable=${_kyber_disable-y}
### Enable multigenerational LRU
# ATTENTION - one of three predefined values should be selected!
# 'standard' - enable multigenerational LRU
# 'stats' - enable multigenerational LRU with stats
# 'none' - disable multigenerational LRU
-_lru_config=${_lru_config='standard'}
+_lru_config=${_lru_config-'standard'}
### Enable per-VMA locking
# ATTENTION - one of three predefined values should be selected!
# 'standard' - enable per-VMA locking
# 'stats' - enable per-VMA locking with stats
# 'none' - disable per-VMA locking
-_vma_config=${_vma_config='standard'}
+_vma_config=${_vma_config-'standard'}
## Enable DAMON
-_damon=${_damon=}
+_damon=${_damon-}
## Enable Linux Random Number Generator
-_lrng_enable=${_lrng_enable=y}
+_lrng_enable=${_lrng_enable-y}
# CPU compiler optimizations - Defaults to prompt at kernel config if left empty
# AMD CPUs : "k8" "k8sse3" "k10" "barcelona" "bobcat" "jaguar" "bulldozer" "piledriver" "steamroller" "excavator" "zen" "zen2" "zen3"
@@ -115,15 +115,15 @@ _lrng_enable=${_lrng_enable=y}
# - "generic" (kernel's default - to share the package between machines with different CPU µarch as long as they are x86-64)
#
# Or use the _use_auto_optimization with _use_auto_optimization=y
-_processor_opt=${_processor_opt=}
+_processor_opt=${_processor_opt-}
-_use_auto_optimization=${_use_auto_optimization=y}
+_use_auto_optimization=${_use_auto_optimization-y}
# disable debug to lower the size of the kernel
-_disable_debug=${_disable_debug=y}
+_disable_debug=${_disable_debug-y}
## Enable zram/zswap ZSTD compression
-_zstd_compression=${_zstd_compression=y}
+_zstd_compression=${_zstd_compression-y}
### Selecting the ZSTD kernel and modules compression level
# ATTENTION - one of two predefined values should be selected!
@@ -131,12 +131,12 @@ _zstd_compression=${_zstd_compression=y}
# 'normal' - standard compression ratio
# WARNING: the ultra settings can sometimes
# be counterproductive in both size and speed.
-_zstd_level_value=${_zstd_level_value='normal'}
+_zstd_level_value=${_zstd_level_value-'normal'}
# Clang LTO mode, only available with the "llvm" compiler - options are "no", "full" or "thin".
# "full: uses 1 thread for Linking, slow and uses more memory, theoretically with the highest performance gains."
# "thin: uses multiple threads, faster and uses less memory, may have a lower runtime performance than Full."
-_use_llvm_lto=${_use_llvm_lto=}
+_use_llvm_lto=${_use_llvm_lto-}
# KCFI is a proposed forward-edge control-flow integrity scheme for
# Clang, which is more suitable for kernel use than the existing CFI
@@ -147,13 +147,13 @@ _use_llvm_lto=${_use_llvm_lto=}
# you can find a patched llvm-git in the cachyos-repo's.
# The packagename is called "llvm-kcfi"
# ATTENTION!: This is very experimental and could fail and the compilation or have other bugs in the kernel
-_use_kcfi=${_use_kcfi=}
+_use_kcfi=${_use_kcfi-}
# Build the zfs module builtin in to the kernel
-_build_zfs=${_build_zfs=}
+_build_zfs=${_build_zfs-}
# Enable bcachefs
-_bcachefs=${_bcachefs=}
+_bcachefs=${_bcachefs-}
# Enable NEST
# NEST is a experimental cfs scheduler you can find more about here:
@@ -163,7 +163,7 @@ _bcachefs=${_bcachefs=}
# taskset -c $THREADS application
# example: taskset -c 0-23 application
# ATTENTION!:Just works together with the BORE Scheduler and CFS Scheduler
-_nest=${_nest=}
+_nest=${_nest-}
# Enable LATENCY NICE
# Latency nice is a approach to sets latency-nice as a per-task attribute
@@ -174,7 +174,7 @@ _nest=${_nest=}
# You need to configure ananicy-cpp for this or use existing settings
# If you want to test it, use the following branch
# https://gitlab.com/ananicy-cpp/ananicy-cpp/-/tree/feature/latency-nice
-_latency_nice=${_latency_nice=}
+_latency_nice=${_latency_nice-}
if [ -n "$_use_llvm_lto" ]; then
pkgsuffix=${_cpusched}-lto
diff --git a/linux-cachyos-bmq/PKGBUILD b/linux-cachyos-bmq/PKGBUILD
index 4bcbd8e3..f4a0a84c 100644
--- a/linux-cachyos-bmq/PKGBUILD
+++ b/linux-cachyos-bmq/PKGBUILD
@@ -7,7 +7,7 @@
# ATTENTION - one of two predefined values should be selected!
# 'yes' - enable CachyOS config
# 'no' - disable CachyOS config
-_cachy_config=${_cachy_config='yes'}
+_cachy_config=${_cachy_config-'yes'}
### Selecting the CPU scheduler
# ATTENTION - one of seven predefined values should be selected!
@@ -19,27 +19,27 @@ _cachy_config=${_cachy_config='yes'}
# 'cfs' - select 'Completely Fair Scheduler'
# 'tt' - select 'Task Type Scheduler by Hamad Marri'
# 'hardened' - select 'BORE Scheduler hardened' ## kernel with hardened config and hardening patches with the bore scheduler
-_cpusched=${_cpusched='bmq'}
+_cpusched=${_cpusched-'bmq'}
### BUILD OPTIONS
# Set these variables to ANYTHING that is not null to enable them
### Tweak kernel options prior to a build via nconfig
-_makenconfig=${_makenconfig=}
+_makenconfig=${_makenconfig-}
### Tweak kernel options prior to a build via menuconfig
-_makemenuconfig=${_makemenuconfig=}
+_makemenuconfig=${_makemenuconfig-}
### Tweak kernel options prior to a build via xconfig
-_makexconfig=${_makexconfig=}
+_makexconfig=${_makexconfig-}
### Tweak kernel options prior to a build via gconfig
-_makegconfig=${_makegconfig=}
+_makegconfig=${_makegconfig-}
# NUMA is optimized for multi-socket motherboards.
# A single multi-core CPU actually runs slower with NUMA enabled.
# See, https://bugs.archlinux.org/task/31187
-_NUMAdisable=${_NUMAdisable=y}
+_NUMAdisable=${_NUMAdisable-y}
# Compile ONLY used modules to VASTLYreduce the number of modules built
# and the build time.
@@ -49,62 +49,62 @@ _NUMAdisable=${_NUMAdisable=y}
# This PKGBUILD read the database kept if it exists
#
# More at this wiki page ---> https://wiki.archlinux.org/index.php/Modprobed-db
-_localmodcfg=${_localmodcfg=}
+_localmodcfg=${_localmodcfg-}
# Use the current kernel's .config file
# Enabling this option will use the .config of the RUNNING kernel rather than
# the ARCH defaults. Useful when the package gets updated and you already went
# through the trouble of customizing your config options. NOT recommended when
# a new kernel is released, but again, convenient for package bumps.
-_use_current=${_use_current=}
+_use_current=${_use_current-}
### Enable KBUILD_CFLAGS -O3
-_cc_harder=${_cc_harder=y}
+_cc_harder=${_cc_harder-y}
### Set this to your number of threads you have in your machine otherwise it will default to 128
-_nr_cpus=${_nr_cpus=}
+_nr_cpus=${_nr_cpus-}
### Set performance governor as default
-_per_gov=${_per_gov=y}
+_per_gov=${_per_gov-y}
### Enable TCP_CONG_BBR2
_tcp_bbr2=${_tcp_bbr2=y}
### Running with a 1000HZ, 750Hz, 600 Hz, 500Hz, 300Hz, 250Hz and 100Hz tick rate
-_HZ_ticks=${_HZ_ticks=750}
+_HZ_ticks=${_HZ_ticks-750}
## Choose between perodic, idle or full
### Full tickless can give higher performances in various cases but, depending on hardware, lower consistency.
-_tickrate=${_tickrate=full}
+_tickrate=${_tickrate-full}
## Choose between full(low-latency), voluntary or server
-_preempt=${_preempt=full}
+_preempt=${_preempt-full}
### Disable MQ-Deadline I/O scheduler
-_mq_deadline_disable=${_mq_deadline_disable=y}
+_mq_deadline_disable=${_mq_deadline_disable-y}
### Disable Kyber I/O scheduler
-_kyber_disable=${_kyber_disable=y}
+_kyber_disable=${_kyber_disable-y}
### Enable multigenerational LRU
# ATTENTION - one of three predefined values should be selected!
# 'standard' - enable multigenerational LRU
# 'stats' - enable multigenerational LRU with stats
# 'none' - disable multigenerational LRU
-_lru_config=${_lru_config='standard'}
+_lru_config=${_lru_config-'standard'}
### Enable per-VMA locking
# ATTENTION - one of three predefined values should be selected!
# 'standard' - enable per-VMA locking
# 'stats' - enable per-VMA locking with stats
# 'none' - disable per-VMA locking
-_vma_config=${_vma_config='standard'}
+_vma_config=${_vma_config-'standard'}
## Enable DAMON
-_damon=${_damon=}
+_damon=${_damon-}
## Enable Linux Random Number Generator
-_lrng_enable=${_lrng_enable=y}
+_lrng_enable=${_lrng_enable-y}
# CPU compiler optimizations - Defaults to prompt at kernel config if left empty
# AMD CPUs : "k8" "k8sse3" "k10" "barcelona" "bobcat" "jaguar" "bulldozer" "piledriver" "steamroller" "excavator" "zen" "zen2" "zen3"
@@ -115,15 +115,15 @@ _lrng_enable=${_lrng_enable=y}
# - "generic" (kernel's default - to share the package between machines with different CPU µarch as long as they are x86-64)
#
# Or use the _use_auto_optimization with _use_auto_optimization=y
-_processor_opt=${_processor_opt=}
+_processor_opt=${_processor_opt-}
-_use_auto_optimization=${_use_auto_optimization=y}
+_use_auto_optimization=${_use_auto_optimization-y}
# disable debug to lower the size of the kernel
-_disable_debug=${_disable_debug=y}
+_disable_debug=${_disable_debug-y}
## Enable zram/zswap ZSTD compression
-_zstd_compression=${_zstd_compression=y}
+_zstd_compression=${_zstd_compression-y}
### Selecting the ZSTD kernel and modules compression level
# ATTENTION - one of two predefined values should be selected!
@@ -131,12 +131,12 @@ _zstd_compression=${_zstd_compression=y}
# 'normal' - standard compression ratio
# WARNING: the ultra settings can sometimes
# be counterproductive in both size and speed.
-_zstd_level_value=${_zstd_level_value='normal'}
+_zstd_level_value=${_zstd_level_value-'normal'}
# Clang LTO mode, only available with the "llvm" compiler - options are "no", "full" or "thin".
# "full: uses 1 thread for Linking, slow and uses more memory, theoretically with the highest performance gains."
# "thin: uses multiple threads, faster and uses less memory, may have a lower runtime performance than Full."
-_use_llvm_lto=${_use_llvm_lto=}
+_use_llvm_lto=${_use_llvm_lto-}
# KCFI is a proposed forward-edge control-flow integrity scheme for
# Clang, which is more suitable for kernel use than the existing CFI
@@ -147,13 +147,13 @@ _use_llvm_lto=${_use_llvm_lto=}
# you can find a patched llvm-git in the cachyos-repo's.
# The packagename is called "llvm-kcfi"
# ATTENTION!: This is very experimental and could fail and the compilation or have other bugs in the kernel
-_use_kcfi=${_use_kcfi=}
+_use_kcfi=${_use_kcfi-}
# Build the zfs module builtin in to the kernel
-_build_zfs=${_build_zfs=}
+_build_zfs=${_build_zfs-}
# Enable bcachefs
-_bcachefs=${_bcachefs=}
+_bcachefs=${_bcachefs-}
# Enable NEST
# NEST is a experimental cfs scheduler you can find more about here:
@@ -163,7 +163,7 @@ _bcachefs=${_bcachefs=}
# taskset -c $THREADS application
# example: taskset -c 0-23 application
# ATTENTION!:Just works together with the BORE Scheduler and CFS Scheduler
-_nest=${_nest=}
+_nest=${_nest-}
# Enable LATENCY NICE
# Latency nice is a approach to sets latency-nice as a per-task attribute
@@ -174,7 +174,7 @@ _nest=${_nest=}
# You need to configure ananicy-cpp for this or use existing settings
# If you want to test it, use the following branch
# https://gitlab.com/ananicy-cpp/ananicy-cpp/-/tree/feature/latency-nice
-_latency_nice=${_latency_nice=}
+_latency_nice=${_latency_nice-}
if [ -n "$_use_llvm_lto" ]; then
pkgsuffix=cachyos-${_cpusched}-lto
diff --git a/linux-cachyos-bore/PKGBUILD b/linux-cachyos-bore/PKGBUILD
index 54850ee9..be7f3431 100644
--- a/linux-cachyos-bore/PKGBUILD
+++ b/linux-cachyos-bore/PKGBUILD
@@ -7,7 +7,7 @@
# ATTENTION - one of two predefined values should be selected!
# 'yes' - enable CachyOS config
# 'no' - disable CachyOS config
-_cachy_config=${_cachy_config='yes'}
+_cachy_config=${_cachy_config-'yes'}
### Selecting the CPU scheduler
# ATTENTION - one of seven predefined values should be selected!
@@ -19,27 +19,27 @@ _cachy_config=${_cachy_config='yes'}
# 'cfs' - select 'Completely Fair Scheduler'
# 'tt' - select 'Task Type Scheduler by Hamad Marri'
# 'hardened' - select 'BORE Scheduler hardened' ## kernel with hardened config and hardening patches with the bore scheduler
-_cpusched=${_cpusched='bore'}
+_cpusched=${_cpusched-'bore'}
### BUILD OPTIONS
# Set these variables to ANYTHING that is not null to enable them
### Tweak kernel options prior to a build via nconfig
-_makenconfig=${_makenconfig=}
+_makenconfig=${_makenconfig-}
### Tweak kernel options prior to a build via menuconfig
-_makemenuconfig=${_makemenuconfig=}
+_makemenuconfig=${_makemenuconfig-}
### Tweak kernel options prior to a build via xconfig
-_makexconfig=${_makexconfig=}
+_makexconfig=${_makexconfig-}
### Tweak kernel options prior to a build via gconfig
-_makegconfig=${_makegconfig=}
+_makegconfig=${_makegconfig-}
# NUMA is optimized for multi-socket motherboards.
# A single multi-core CPU actually runs slower with NUMA enabled.
# See, https://bugs.archlinux.org/task/31187
-_NUMAdisable=${_NUMAdisable=y}
+_NUMAdisable=${_NUMAdisable-y}
# Compile ONLY used modules to VASTLYreduce the number of modules built
# and the build time.
@@ -49,62 +49,62 @@ _NUMAdisable=${_NUMAdisable=y}
# This PKGBUILD read the database kept if it exists
#
# More at this wiki page ---> https://wiki.archlinux.org/index.php/Modprobed-db
-_localmodcfg=${_localmodcfg=}
+_localmodcfg=${_localmodcfg-}
# Use the current kernel's .config file
# Enabling this option will use the .config of the RUNNING kernel rather than
# the ARCH defaults. Useful when the package gets updated and you already went
# through the trouble of customizing your config options. NOT recommended when
# a new kernel is released, but again, convenient for package bumps.
-_use_current=${_use_current=}
+_use_current=${_use_current-}
### Enable KBUILD_CFLAGS -O3
-_cc_harder=${_cc_harder=y}
+_cc_harder=${_cc_harder-y}
### Set this to your number of threads you have in your machine otherwise it will default to 128
-_nr_cpus=${_nr_cpus=}
+_nr_cpus=${_nr_cpus-}
### Set performance governor as default
-_per_gov=${_per_gov=y}
+_per_gov=${_per_gov-y}
### Enable TCP_CONG_BBR2
_tcp_bbr2=${_tcp_bbr2=y}
### Running with a 1000HZ, 750Hz, 600 Hz, 500Hz, 300Hz, 250Hz and 100Hz tick rate
-_HZ_ticks=${_HZ_ticks=750}
+_HZ_ticks=${_HZ_ticks-750}
## Choose between perodic, idle or full
### Full tickless can give higher performances in various cases but, depending on hardware, lower consistency.
-_tickrate=${_tickrate=full}
+_tickrate=${_tickrate-full}
## Choose between full(low-latency), voluntary or server
-_preempt=${_preempt=full}
+_preempt=${_preempt-full}
### Disable MQ-Deadline I/O scheduler
-_mq_deadline_disable=${_mq_deadline_disable=y}
+_mq_deadline_disable=${_mq_deadline_disable-y}
### Disable Kyber I/O scheduler
-_kyber_disable=${_kyber_disable=y}
+_kyber_disable=${_kyber_disable-y}
### Enable multigenerational LRU
# ATTENTION - one of three predefined values should be selected!
# 'standard' - enable multigenerational LRU
# 'stats' - enable multigenerational LRU with stats
# 'none' - disable multigenerational LRU
-_lru_config=${_lru_config='standard'}
+_lru_config=${_lru_config-'standard'}
### Enable per-VMA locking
# ATTENTION - one of three predefined values should be selected!
# 'standard' - enable per-VMA locking
# 'stats' - enable per-VMA locking with stats
# 'none' - disable per-VMA locking
-_vma_config=${_vma_config='standard'}
+_vma_config=${_vma_config-'standard'}
## Enable DAMON
-_damon=${_damon=}
+_damon=${_damon-}
## Enable Linux Random Number Generator
-_lrng_enable=${_lrng_enable=y}
+_lrng_enable=${_lrng_enable-y}
# CPU compiler optimizations - Defaults to prompt at kernel config if left empty
# AMD CPUs : "k8" "k8sse3" "k10" "barcelona" "bobcat" "jaguar" "bulldozer" "piledriver" "steamroller" "excavator" "zen" "zen2" "zen3"
@@ -115,15 +115,15 @@ _lrng_enable=${_lrng_enable=y}
# - "generic" (kernel's default - to share the package between machines with different CPU µarch as long as they are x86-64)
#
# Or use the _use_auto_optimization with _use_auto_optimization=y
-_processor_opt=${_processor_opt=}
+_processor_opt=${_processor_opt-}
-_use_auto_optimization=${_use_auto_optimization=y}
+_use_auto_optimization=${_use_auto_optimization-y}
# disable debug to lower the size of the kernel
-_disable_debug=${_disable_debug=y}
+_disable_debug=${_disable_debug-y}
## Enable zram/zswap ZSTD compression
-_zstd_compression=${_zstd_compression=y}
+_zstd_compression=${_zstd_compression-y}
### Selecting the ZSTD kernel and modules compression level
# ATTENTION - one of two predefined values should be selected!
@@ -131,12 +131,12 @@ _zstd_compression=${_zstd_compression=y}
# 'normal' - standard compression ratio
# WARNING: the ultra settings can sometimes
# be counterproductive in both size and speed.
-_zstd_level_value=${_zstd_level_value='normal'}
+_zstd_level_value=${_zstd_level_value-'normal'}
# Clang LTO mode, only available with the "llvm" compiler - options are "no", "full" or "thin".
# "full: uses 1 thread for Linking, slow and uses more memory, theoretically with the highest performance gains."
# "thin: uses multiple threads, faster and uses less memory, may have a lower runtime performance than Full."
-_use_llvm_lto=${_use_llvm_lto=}
+_use_llvm_lto=${_use_llvm_lto-}
# KCFI is a proposed forward-edge control-flow integrity scheme for
# Clang, which is more suitable for kernel use than the existing CFI
@@ -147,13 +147,13 @@ _use_llvm_lto=${_use_llvm_lto=}
# you can find a patched llvm-git in the cachyos-repo's.
# The packagename is called "llvm-kcfi"
# ATTENTION!: This is very experimental and could fail and the compilation or have other bugs in the kernel
-_use_kcfi=${_use_kcfi=}
+_use_kcfi=${_use_kcfi-}
# Build the zfs module builtin in to the kernel
-_build_zfs=${_build_zfs=}
+_build_zfs=${_build_zfs-}
# Enable bcachefs
-_bcachefs=${_bcachefs=}
+_bcachefs=${_bcachefs-}
# Enable NEST
# NEST is a experimental cfs scheduler you can find more about here:
@@ -163,7 +163,7 @@ _bcachefs=${_bcachefs=}
# taskset -c $THREADS application
# example: taskset -c 0-23 application
# ATTENTION!:Just works together with the BORE Scheduler and CFS Scheduler
-_nest=${_nest=}
+_nest=${_nest-}
# Enable LATENCY NICE
# Latency nice is a approach to sets latency-nice as a per-task attribute
@@ -174,7 +174,7 @@ _nest=${_nest=}
# You need to configure ananicy-cpp for this or use existing settings
# If you want to test it, use the following branch
# https://gitlab.com/ananicy-cpp/ananicy-cpp/-/tree/feature/latency-nice
-_latency_nice=${_latency_nice=}
+_latency_nice=${_latency_nice-}
if [ -n "$_use_llvm_lto" ]; then
pkgsuffix=cachyos-${_cpusched}-lto
diff --git a/linux-cachyos-cacule/PKGBUILD b/linux-cachyos-cacule/PKGBUILD
index 3575f7d0..1aa29aa6 100644
--- a/linux-cachyos-cacule/PKGBUILD
+++ b/linux-cachyos-cacule/PKGBUILD
@@ -7,7 +7,7 @@
# ATTENTION - one of two predefined values should be selected!
# 'yes' - enable CachyOS config
# 'no' - disable CachyOS config
-_cachy_config=${_cachy_config='yes'}
+_cachy_config=${_cachy_config-'yes'}
### Selecting the CPU scheduler
# ATTENTION - one of seven predefined values should be selected!
@@ -19,27 +19,27 @@ _cachy_config=${_cachy_config='yes'}
# 'cfs' - select 'Completely Fair Scheduler'
# 'tt' - select 'Task Type Scheduler by Hamad Marri'
# 'hardened' - select 'BORE Scheduler hardened' ## kernel with hardened config and hardening patches with the bore scheduler
-_cpusched=${_cpusched='cacule'}
+_cpusched=${_cpusched-'cacule'}
### BUILD OPTIONS
# Set these variables to ANYTHING that is not null to enable them
### Tweak kernel options prior to a build via nconfig
-_makenconfig=${_makenconfig=}
+_makenconfig=${_makenconfig-}
### Tweak kernel options prior to a build via menuconfig
-_makemenuconfig=${_makemenuconfig=}
+_makemenuconfig=${_makemenuconfig-}
### Tweak kernel options prior to a build via xconfig
-_makexconfig=${_makexconfig=}
+_makexconfig=${_makexconfig-}
### Tweak kernel options prior to a build via gconfig
-_makegconfig=${_makegconfig=}
+_makegconfig=${_makegconfig-}
# NUMA is optimized for multi-socket motherboards.
# A single multi-core CPU actually runs slower with NUMA enabled.
# See, https://bugs.archlinux.org/task/31187
-_NUMAdisable=${_NUMAdisable=y}
+_NUMAdisable=${_NUMAdisable-y}
# Compile ONLY used modules to VASTLYreduce the number of modules built
# and the build time.
@@ -49,62 +49,62 @@ _NUMAdisable=${_NUMAdisable=y}
# This PKGBUILD read the database kept if it exists
#
# More at this wiki page ---> https://wiki.archlinux.org/index.php/Modprobed-db
-_localmodcfg=${_localmodcfg=}
+_localmodcfg=${_localmodcfg-}
# Use the current kernel's .config file
# Enabling this option will use the .config of the RUNNING kernel rather than
# the ARCH defaults. Useful when the package gets updated and you already went
# through the trouble of customizing your config options. NOT recommended when
# a new kernel is released, but again, convenient for package bumps.
-_use_current=${_use_current=}
+_use_current=${_use_current-}
### Enable KBUILD_CFLAGS -O3
-_cc_harder=${_cc_harder=y}
+_cc_harder=${_cc_harder-y}
### Set this to your number of threads you have in your machine otherwise it will default to 128
-_nr_cpus=${_nr_cpus=}
+_nr_cpus=${_nr_cpus-}
### Set performance governor as default
-_per_gov=${_per_gov=y}
+_per_gov=${_per_gov-y}
### Enable TCP_CONG_BBR2
_tcp_bbr2=${_tcp_bbr2=y}
### Running with a 1000HZ, 750Hz, 600 Hz, 500Hz, 300Hz, 250Hz and 100Hz tick rate
-_HZ_ticks=${_HZ_ticks=750}
+_HZ_ticks=${_HZ_ticks-750}
## Choose between perodic, idle or full
### Full tickless can give higher performances in various cases but, depending on hardware, lower consistency.
-_tickrate=${_tickrate=full}
+_tickrate=${_tickrate-full}
## Choose between full(low-latency), voluntary or server
-_preempt=${_preempt=full}
+_preempt=${_preempt-full}
### Disable MQ-Deadline I/O scheduler
-_mq_deadline_disable=${_mq_deadline_disable=y}
+_mq_deadline_disable=${_mq_deadline_disable-y}
### Disable Kyber I/O scheduler
-_kyber_disable=${_kyber_disable=y}
+_kyber_disable=${_kyber_disable-y}
### Enable multigenerational LRU
# ATTENTION - one of three predefined values should be selected!
# 'standard' - enable multigenerational LRU
# 'stats' - enable multigenerational LRU with stats
# 'none' - disable multigenerational LRU
-_lru_config=${_lru_config='standard'}
+_lru_config=${_lru_config-'standard'}
### Enable per-VMA locking
# ATTENTION - one of three predefined values should be selected!
# 'standard' - enable per-VMA locking
# 'stats' - enable per-VMA locking with stats
# 'none' - disable per-VMA locking
-_vma_config=${_vma_config='standard'}
+_vma_config=${_vma_config-'standard'}
## Enable DAMON
-_damon=${_damon=}
+_damon=${_damon-}
## Enable Linux Random Number Generator
-_lrng_enable=${_lrng_enable=y}
+_lrng_enable=${_lrng_enable-y}
# CPU compiler optimizations - Defaults to prompt at kernel config if left empty
# AMD CPUs : "k8" "k8sse3" "k10" "barcelona" "bobcat" "jaguar" "bulldozer" "piledriver" "steamroller" "excavator" "zen" "zen2" "zen3"
@@ -115,15 +115,15 @@ _lrng_enable=${_lrng_enable=y}
# - "generic" (kernel's default - to share the package between machines with different CPU µarch as long as they are x86-64)
#
# Or use the _use_auto_optimization with _use_auto_optimization=y
-_processor_opt=${_processor_opt=}
+_processor_opt=${_processor_opt-}
-_use_auto_optimization=${_use_auto_optimization=y}
+_use_auto_optimization=${_use_auto_optimization-y}
# disable debug to lower the size of the kernel
-_disable_debug=${_disable_debug=y}
+_disable_debug=${_disable_debug-y}
## Enable zram/zswap ZSTD compression
-_zstd_compression=${_zstd_compression=y}
+_zstd_compression=${_zstd_compression-y}
### Selecting the ZSTD kernel and modules compression level
# ATTENTION - one of two predefined values should be selected!
@@ -131,12 +131,12 @@ _zstd_compression=${_zstd_compression=y}
# 'normal' - standard compression ratio
# WARNING: the ultra settings can sometimes
# be counterproductive in both size and speed.
-_zstd_level_value=${_zstd_level_value='normal'}
+_zstd_level_value=${_zstd_level_value-'normal'}
# Clang LTO mode, only available with the "llvm" compiler - options are "no", "full" or "thin".
# "full: uses 1 thread for Linking, slow and uses more memory, theoretically with the highest performance gains."
# "thin: uses multiple threads, faster and uses less memory, may have a lower runtime performance than Full."
-_use_llvm_lto=${_use_llvm_lto=}
+_use_llvm_lto=${_use_llvm_lto-}
# KCFI is a proposed forward-edge control-flow integrity scheme for
# Clang, which is more suitable for kernel use than the existing CFI
@@ -147,13 +147,13 @@ _use_llvm_lto=${_use_llvm_lto=}
# you can find a patched llvm-git in the cachyos-repo's.
# The packagename is called "llvm-kcfi"
# ATTENTION!: This is very experimental and could fail and the compilation or have other bugs in the kernel
-_use_kcfi=${_use_kcfi=}
+_use_kcfi=${_use_kcfi-}
# Build the zfs module builtin in to the kernel
-_build_zfs=${_build_zfs=}
+_build_zfs=${_build_zfs-}
# Enable bcachefs
-_bcachefs=${_bcachefs=}
+_bcachefs=${_bcachefs-}
# Enable NEST
# NEST is a experimental cfs scheduler you can find more about here:
@@ -163,7 +163,7 @@ _bcachefs=${_bcachefs=}
# taskset -c $THREADS application
# example: taskset -c 0-23 application
# ATTENTION!:Just works together with the BORE Scheduler and CFS Scheduler
-_nest=${_nest=}
+_nest=${_nest-}
# Enable LATENCY NICE
# Latency nice is a approach to sets latency-nice as a per-task attribute
@@ -174,7 +174,7 @@ _nest=${_nest=}
# You need to configure ananicy-cpp for this or use existing settings
# If you want to test it, use the following branch
# https://gitlab.com/ananicy-cpp/ananicy-cpp/-/tree/feature/latency-nice
-_latency_nice=${_latency_nice=}
+_latency_nice=${_latency_nice-}
if [ -n "$_use_llvm_lto" ]; then
pkgsuffix=cachyos-${_cpusched}-lto
diff --git a/linux-cachyos-cfs/PKGBUILD b/linux-cachyos-cfs/PKGBUILD
index 3fb1d857..4a0c664f 100644
--- a/linux-cachyos-cfs/PKGBUILD
+++ b/linux-cachyos-cfs/PKGBUILD
@@ -7,7 +7,7 @@
# ATTENTION - one of two predefined values should be selected!
# 'yes' - enable CachyOS config
# 'no' - disable CachyOS config
-_cachy_config=${_cachy_config='yes'}
+_cachy_config=${_cachy_config-'yes'}
### Selecting the CPU scheduler
# ATTENTION - one of seven predefined values should be selected!
@@ -19,27 +19,27 @@ _cachy_config=${_cachy_config='yes'}
# 'cfs' - select 'Completely Fair Scheduler'
# 'tt' - select 'Task Type Scheduler by Hamad Marri'
# 'hardened' - select 'BORE Scheduler hardened' ## kernel with hardened config and hardening patches with the bore scheduler
-_cpusched=${_cpusched='cfs'}
+_cpusched=${_cpusched-'cfs'}
### BUILD OPTIONS
# Set these variables to ANYTHING that is not null to enable them
### Tweak kernel options prior to a build via nconfig
-_makenconfig=${_makenconfig=}
+_makenconfig=${_makenconfig-}
### Tweak kernel options prior to a build via menuconfig
-_makemenuconfig=${_makemenuconfig=}
+_makemenuconfig=${_makemenuconfig-}
### Tweak kernel options prior to a build via xconfig
-_makexconfig=${_makexconfig=}
+_makexconfig=${_makexconfig-}
### Tweak kernel options prior to a build via gconfig
-_makegconfig=${_makegconfig=}
+_makegconfig=${_makegconfig-}
# NUMA is optimized for multi-socket motherboards.
# A single multi-core CPU actually runs slower with NUMA enabled.
# See, https://bugs.archlinux.org/task/31187
-_NUMAdisable=${_NUMAdisable=y}
+_NUMAdisable=${_NUMAdisable-y}
# Compile ONLY used modules to VASTLYreduce the number of modules built
# and the build time.
@@ -49,62 +49,62 @@ _NUMAdisable=${_NUMAdisable=y}
# This PKGBUILD read the database kept if it exists
#
# More at this wiki page ---> https://wiki.archlinux.org/index.php/Modprobed-db
-_localmodcfg=${_localmodcfg=}
+_localmodcfg=${_localmodcfg-}
# Use the current kernel's .config file
# Enabling this option will use the .config of the RUNNING kernel rather than
# the ARCH defaults. Useful when the package gets updated and you already went
# through the trouble of customizing your config options. NOT recommended when
# a new kernel is released, but again, convenient for package bumps.
-_use_current=${_use_current=}
+_use_current=${_use_current-}
### Enable KBUILD_CFLAGS -O3
-_cc_harder=${_cc_harder=y}
+_cc_harder=${_cc_harder-y}
### Set this to your number of threads you have in your machine otherwise it will default to 128
-_nr_cpus=${_nr_cpus=}
+_nr_cpus=${_nr_cpus-}
### Set performance governor as default
-_per_gov=${_per_gov=y}
+_per_gov=${_per_gov-y}
### Enable TCP_CONG_BBR2
_tcp_bbr2=${_tcp_bbr2=y}
### Running with a 1000HZ, 750Hz, 600 Hz, 500Hz, 300Hz, 250Hz and 100Hz tick rate
-_HZ_ticks=${_HZ_ticks=750}
+_HZ_ticks=${_HZ_ticks-750}
## Choose between perodic, idle or full
### Full tickless can give higher performances in various cases but, depending on hardware, lower consistency.
-_tickrate=${_tickrate=full}
+_tickrate=${_tickrate-full}
## Choose between full(low-latency), voluntary or server
-_preempt=${_preempt=full}
+_preempt=${_preempt-full}
### Disable MQ-Deadline I/O scheduler
-_mq_deadline_disable=${_mq_deadline_disable=y}
+_mq_deadline_disable=${_mq_deadline_disable-y}
### Disable Kyber I/O scheduler
-_kyber_disable=${_kyber_disable=y}
+_kyber_disable=${_kyber_disable-y}
### Enable multigenerational LRU
# ATTENTION - one of three predefined values should be selected!
# 'standard' - enable multigenerational LRU
# 'stats' - enable multigenerational LRU with stats
# 'none' - disable multigenerational LRU
-_lru_config=${_lru_config='standard'}
+_lru_config=${_lru_config-'standard'}
### Enable per-VMA locking
# ATTENTION - one of three predefined values should be selected!
# 'standard' - enable per-VMA locking
# 'stats' - enable per-VMA locking with stats
# 'none' - disable per-VMA locking
-_vma_config=${_vma_config='standard'}
+_vma_config=${_vma_config-'standard'}
## Enable DAMON
-_damon=${_damon=}
+_damon=${_damon-}
## Enable Linux Random Number Generator
-_lrng_enable=${_lrng_enable=y}
+_lrng_enable=${_lrng_enable-y}
# CPU compiler optimizations - Defaults to prompt at kernel config if left empty
# AMD CPUs : "k8" "k8sse3" "k10" "barcelona" "bobcat" "jaguar" "bulldozer" "piledriver" "steamroller" "excavator" "zen" "zen2" "zen3"
@@ -115,15 +115,15 @@ _lrng_enable=${_lrng_enable=y}
# - "generic" (kernel's default - to share the package between machines with different CPU µarch as long as they are x86-64)
#
# Or use the _use_auto_optimization with _use_auto_optimization=y
-_processor_opt=${_processor_opt=}
+_processor_opt=${_processor_opt-}
-_use_auto_optimization=${_use_auto_optimization=y}
+_use_auto_optimization=${_use_auto_optimization-y}
# disable debug to lower the size of the kernel
-_disable_debug=${_disable_debug=y}
+_disable_debug=${_disable_debug-y}
## Enable zram/zswap ZSTD compression
-_zstd_compression=${_zstd_compression=y}
+_zstd_compression=${_zstd_compression-y}
### Selecting the ZSTD kernel and modules compression level
# ATTENTION - one of two predefined values should be selected!
@@ -131,12 +131,12 @@ _zstd_compression=${_zstd_compression=y}
# 'normal' - standard compression ratio
# WARNING: the ultra settings can sometimes
# be counterproductive in both size and speed.
-_zstd_level_value=${_zstd_level_value='normal'}
+_zstd_level_value=${_zstd_level_value-'normal'}
# Clang LTO mode, only available with the "llvm" compiler - options are "no", "full" or "thin".
# "full: uses 1 thread for Linking, slow and uses more memory, theoretically with the highest performance gains."
# "thin: uses multiple threads, faster and uses less memory, may have a lower runtime performance than Full."
-_use_llvm_lto=${_use_llvm_lto=}
+_use_llvm_lto=${_use_llvm_lto-}
# KCFI is a proposed forward-edge control-flow integrity scheme for
# Clang, which is more suitable for kernel use than the existing CFI
@@ -147,13 +147,13 @@ _use_llvm_lto=${_use_llvm_lto=}
# you can find a patched llvm-git in the cachyos-repo's.
# The packagename is called "llvm-kcfi"
# ATTENTION!: This is very experimental and could fail and the compilation or have other bugs in the kernel
-_use_kcfi=${_use_kcfi=}
+_use_kcfi=${_use_kcfi-}
# Build the zfs module builtin in to the kernel
-_build_zfs=${_build_zfs=}
+_build_zfs=${_build_zfs-}
# Enable bcachefs
-_bcachefs=${_bcachefs=}
+_bcachefs=${_bcachefs-}
# Enable NEST
# NEST is a experimental cfs scheduler you can find more about here:
@@ -163,7 +163,7 @@ _bcachefs=${_bcachefs=}
# taskset -c $THREADS application
# example: taskset -c 0-23 application
# ATTENTION!:Just works together with the BORE Scheduler and CFS Scheduler
-_nest=${_nest=}
+_nest=${_nest-}
# Enable LATENCY NICE
# Latency nice is a approach to sets latency-nice as a per-task attribute
@@ -174,7 +174,7 @@ _nest=${_nest=}
# You need to configure ananicy-cpp for this or use existing settings
# If you want to test it, use the following branch
# https://gitlab.com/ananicy-cpp/ananicy-cpp/-/tree/feature/latency-nice
-_latency_nice=${_latency_nice=}
+_latency_nice=${_latency_nice-}
if [ -n "$_use_llvm_lto" ]; then
pkgsuffix=cachyos-${_cpusched}-lto
diff --git a/linux-cachyos-hardened/PKGBUILD b/linux-cachyos-hardened/PKGBUILD
index 840150a9..d9a45488 100644
--- a/linux-cachyos-hardened/PKGBUILD
+++ b/linux-cachyos-hardened/PKGBUILD
@@ -7,7 +7,7 @@
# ATTENTION - one of two predefined values should be selected!
# 'yes' - enable CachyOS config
# 'no' - disable CachyOS config
-_cachy_config=${_cachy_config='yes'}
+_cachy_config=${_cachy_config-'yes'}
### Selecting the CPU scheduler
# ATTENTION - one of seven predefined values should be selected!
@@ -19,27 +19,27 @@ _cachy_config=${_cachy_config='yes'}
# 'cfs' - select 'Completely Fair Scheduler'
# 'tt' - select 'Task Type Scheduler by Hamad Marri'
# 'hardened' - select 'BORE Scheduler hardened' ## kernel with hardened config and hardening patches with the bore scheduler
-_cpusched=${_cpusched='hardened'}
+_cpusched=${_cpusched-'hardened'}
### BUILD OPTIONS
# Set these variables to ANYTHING that is not null to enable them
### Tweak kernel options prior to a build via nconfig
-_makenconfig=${_makenconfig=}
+_makenconfig=${_makenconfig-}
### Tweak kernel options prior to a build via menuconfig
-_makemenuconfig=${_makemenuconfig=}
+_makemenuconfig=${_makemenuconfig-}
### Tweak kernel options prior to a build via xconfig
-_makexconfig=${_makexconfig=}
+_makexconfig=${_makexconfig-}
### Tweak kernel options prior to a build via gconfig
-_makegconfig=${_makegconfig=}
+_makegconfig=${_makegconfig-}
# NUMA is optimized for multi-socket motherboards.
# A single multi-core CPU actually runs slower with NUMA enabled.
# See, https://bugs.archlinux.org/task/31187
-_NUMAdisable=${_NUMAdisable=y}
+_NUMAdisable=${_NUMAdisable-y}
# Compile ONLY used modules to VASTLYreduce the number of modules built
# and the build time.
@@ -49,62 +49,62 @@ _NUMAdisable=${_NUMAdisable=y}
# This PKGBUILD read the database kept if it exists
#
# More at this wiki page ---> https://wiki.archlinux.org/index.php/Modprobed-db
-_localmodcfg=${_localmodcfg=}
+_localmodcfg=${_localmodcfg-}
# Use the current kernel's .config file
# Enabling this option will use the .config of the RUNNING kernel rather than
# the ARCH defaults. Useful when the package gets updated and you already went
# through the trouble of customizing your config options. NOT recommended when
# a new kernel is released, but again, convenient for package bumps.
-_use_current=${_use_current=}
+_use_current=${_use_current-}
### Enable KBUILD_CFLAGS -O3
-_cc_harder=${_cc_harder=y}
+_cc_harder=${_cc_harder-y}
### Set this to your number of threads you have in your machine otherwise it will default to 128
-_nr_cpus=${_nr_cpus=}
+_nr_cpus=${_nr_cpus-}
### Set performance governor as default
-_per_gov=${_per_gov=y}
+_per_gov=${_per_gov-y}
### Enable TCP_CONG_BBR2
_tcp_bbr2=${_tcp_bbr2=y}
### Running with a 1000HZ, 750Hz, 600 Hz, 500Hz, 300Hz, 250Hz and 100Hz tick rate
-_HZ_ticks=${_HZ_ticks=750}
+_HZ_ticks=${_HZ_ticks-750}
## Choose between perodic, idle or full
### Full tickless can give higher performances in various cases but, depending on hardware, lower consistency.
-_tickrate=${_tickrate=full}
+_tickrate=${_tickrate-full}
## Choose between full(low-latency), voluntary or server
-_preempt=${_preempt=full}
+_preempt=${_preempt-full}
### Disable MQ-Deadline I/O scheduler
-_mq_deadline_disable=${_mq_deadline_disable=y}
+_mq_deadline_disable=${_mq_deadline_disable-y}
### Disable Kyber I/O scheduler
-_kyber_disable=${_kyber_disable=y}
+_kyber_disable=${_kyber_disable-y}
### Enable multigenerational LRU
# ATTENTION - one of three predefined values should be selected!
# 'standard' - enable multigenerational LRU
# 'stats' - enable multigenerational LRU with stats
# 'none' - disable multigenerational LRU
-_lru_config=${_lru_config='standard'}
+_lru_config=${_lru_config-'standard'}
### Enable per-VMA locking
# ATTENTION - one of three predefined values should be selected!
# 'standard' - enable per-VMA locking
# 'stats' - enable per-VMA locking with stats
# 'none' - disable per-VMA locking
-_vma_config=${_vma_config='standard'}
+_vma_config=${_vma_config-'standard'}
## Enable DAMON
-_damon=${_damon=}
+_damon=${_damon-}
## Enable Linux Random Number Generator
-_lrng_enable=${_lrng_enable=y}
+_lrng_enable=${_lrng_enable-y}
# CPU compiler optimizations - Defaults to prompt at kernel config if left empty
# AMD CPUs : "k8" "k8sse3" "k10" "barcelona" "bobcat" "jaguar" "bulldozer" "piledriver" "steamroller" "excavator" "zen" "zen2" "zen3"
@@ -115,15 +115,15 @@ _lrng_enable=${_lrng_enable=y}
# - "generic" (kernel's default - to share the package between machines with different CPU µarch as long as they are x86-64)
#
# Or use the _use_auto_optimization with _use_auto_optimization=y
-_processor_opt=${_processor_opt=}
+_processor_opt=${_processor_opt-}
-_use_auto_optimization=${_use_auto_optimization=y}
+_use_auto_optimization=${_use_auto_optimization-y}
# disable debug to lower the size of the kernel
-_disable_debug=${_disable_debug=y}
+_disable_debug=${_disable_debug-y}
## Enable zram/zswap ZSTD compression
-_zstd_compression=${_zstd_compression=y}
+_zstd_compression=${_zstd_compression-y}
### Selecting the ZSTD kernel and modules compression level
# ATTENTION - one of two predefined values should be selected!
@@ -131,12 +131,12 @@ _zstd_compression=${_zstd_compression=y}
# 'normal' - standard compression ratio
# WARNING: the ultra settings can sometimes
# be counterproductive in both size and speed.
-_zstd_level_value=${_zstd_level_value='normal'}
+_zstd_level_value=${_zstd_level_value-'normal'}
# Clang LTO mode, only available with the "llvm" compiler - options are "no", "full" or "thin".
# "full: uses 1 thread for Linking, slow and uses more memory, theoretically with the highest performance gains."
# "thin: uses multiple threads, faster and uses less memory, may have a lower runtime performance than Full."
-_use_llvm_lto=${_use_llvm_lto=}
+_use_llvm_lto=${_use_llvm_lto-}
# KCFI is a proposed forward-edge control-flow integrity scheme for
# Clang, which is more suitable for kernel use than the existing CFI
@@ -147,13 +147,13 @@ _use_llvm_lto=${_use_llvm_lto=}
# you can find a patched llvm-git in the cachyos-repo's.
# The packagename is called "llvm-kcfi"
# ATTENTION!: This is very experimental and could fail and the compilation or have other bugs in the kernel
-_use_kcfi=${_use_kcfi=}
+_use_kcfi=${_use_kcfi-}
# Build the zfs module builtin in to the kernel
-_build_zfs=${_build_zfs=}
+_build_zfs=${_build_zfs-}
# Enable bcachefs
-_bcachefs=${_bcachefs=}
+_bcachefs=${_bcachefs-}
# Enable NEST
# NEST is a experimental cfs scheduler you can find more about here:
@@ -163,7 +163,7 @@ _bcachefs=${_bcachefs=}
# taskset -c $THREADS application
# example: taskset -c 0-23 application
# ATTENTION!:Just works together with the BORE Scheduler and CFS Scheduler
-_nest=${_nest=}
+_nest=${_nest-}
# Enable LATENCY NICE
# Latency nice is a approach to sets latency-nice as a per-task attribute
@@ -174,7 +174,7 @@ _nest=${_nest=}
# You need to configure ananicy-cpp for this or use existing settings
# If you want to test it, use the following branch
# https://gitlab.com/ananicy-cpp/ananicy-cpp/-/tree/feature/latency-nice
-_latency_nice=${_latency_nice=}
+_latency_nice=${_latency_nice-}
if [ -n "$_use_llvm_lto" ]; then
pkgsuffix=cachyos-${_cpusched}-lto
diff --git a/linux-cachyos-pds/PKGBUILD b/linux-cachyos-pds/PKGBUILD
index 0dd42172..231d06e9 100644
--- a/linux-cachyos-pds/PKGBUILD
+++ b/linux-cachyos-pds/PKGBUILD
@@ -7,7 +7,7 @@
# ATTENTION - one of two predefined values should be selected!
# 'yes' - enable CachyOS config
# 'no' - disable CachyOS config
-_cachy_config=${_cachy_config='yes'}
+_cachy_config=${_cachy_config-'yes'}
### Selecting the CPU scheduler
# ATTENTION - one of seven predefined values should be selected!
@@ -19,27 +19,27 @@ _cachy_config=${_cachy_config='yes'}
# 'cfs' - select 'Completely Fair Scheduler'
# 'tt' - select 'Task Type Scheduler by Hamad Marri'
# 'hardened' - select 'BORE Scheduler hardened' ## kernel with hardened config and hardening patches with the bore scheduler
-_cpusched=${_cpusched='pds'}
+_cpusched=${_cpusched-'pds'}
### BUILD OPTIONS
# Set these variables to ANYTHING that is not null to enable them
### Tweak kernel options prior to a build via nconfig
-_makenconfig=${_makenconfig=}
+_makenconfig=${_makenconfig-}
### Tweak kernel options prior to a build via menuconfig
-_makemenuconfig=${_makemenuconfig=}
+_makemenuconfig=${_makemenuconfig-}
### Tweak kernel options prior to a build via xconfig
-_makexconfig=${_makexconfig=}
+_makexconfig=${_makexconfig-}
### Tweak kernel options prior to a build via gconfig
-_makegconfig=${_makegconfig=}
+_makegconfig=${_makegconfig-}
# NUMA is optimized for multi-socket motherboards.
# A single multi-core CPU actually runs slower with NUMA enabled.
# See, https://bugs.archlinux.org/task/31187
-_NUMAdisable=${_NUMAdisable=y}
+_NUMAdisable=${_NUMAdisable-y}
# Compile ONLY used modules to VASTLYreduce the number of modules built
# and the build time.
@@ -49,62 +49,62 @@ _NUMAdisable=${_NUMAdisable=y}
# This PKGBUILD read the database kept if it exists
#
# More at this wiki page ---> https://wiki.archlinux.org/index.php/Modprobed-db
-_localmodcfg=${_localmodcfg=}
+_localmodcfg=${_localmodcfg-}
# Use the current kernel's .config file
# Enabling this option will use the .config of the RUNNING kernel rather than
# the ARCH defaults. Useful when the package gets updated and you already went
# through the trouble of customizing your config options. NOT recommended when
# a new kernel is released, but again, convenient for package bumps.
-_use_current=${_use_current=}
+_use_current=${_use_current-}
### Enable KBUILD_CFLAGS -O3
-_cc_harder=${_cc_harder=y}
+_cc_harder=${_cc_harder-y}
### Set this to your number of threads you have in your machine otherwise it will default to 128
-_nr_cpus=${_nr_cpus=}
+_nr_cpus=${_nr_cpus-}
### Set performance governor as default
-_per_gov=${_per_gov=y}
+_per_gov=${_per_gov-y}
### Enable TCP_CONG_BBR2
_tcp_bbr2=${_tcp_bbr2=y}
### Running with a 1000HZ, 750Hz, 600 Hz, 500Hz, 300Hz, 250Hz and 100Hz tick rate
-_HZ_ticks=${_HZ_ticks=750}
+_HZ_ticks=${_HZ_ticks-750}
## Choose between perodic, idle or full
### Full tickless can give higher performances in various cases but, depending on hardware, lower consistency.
-_tickrate=${_tickrate=full}
+_tickrate=${_tickrate-full}
## Choose between full(low-latency), voluntary or server
-_preempt=${_preempt=full}
+_preempt=${_preempt-full}
### Disable MQ-Deadline I/O scheduler
-_mq_deadline_disable=${_mq_deadline_disable=y}
+_mq_deadline_disable=${_mq_deadline_disable-y}
### Disable Kyber I/O scheduler
-_kyber_disable=${_kyber_disable=y}
+_kyber_disable=${_kyber_disable-y}
### Enable multigenerational LRU
# ATTENTION - one of three predefined values should be selected!
# 'standard' - enable multigenerational LRU
# 'stats' - enable multigenerational LRU with stats
# 'none' - disable multigenerational LRU
-_lru_config=${_lru_config='standard'}
+_lru_config=${_lru_config-'standard'}
### Enable per-VMA locking
# ATTENTION - one of three predefined values should be selected!
# 'standard' - enable per-VMA locking
# 'stats' - enable per-VMA locking with stats
# 'none' - disable per-VMA locking
-_vma_config=${_vma_config='standard'}
+_vma_config=${_vma_config-'standard'}
## Enable DAMON
-_damon=${_damon=}
+_damon=${_damon-}
## Enable Linux Random Number Generator
-_lrng_enable=${_lrng_enable=y}
+_lrng_enable=${_lrng_enable-y}
# CPU compiler optimizations - Defaults to prompt at kernel config if left empty
# AMD CPUs : "k8" "k8sse3" "k10" "barcelona" "bobcat" "jaguar" "bulldozer" "piledriver" "steamroller" "excavator" "zen" "zen2" "zen3"
@@ -115,15 +115,15 @@ _lrng_enable=${_lrng_enable=y}
# - "generic" (kernel's default - to share the package between machines with different CPU µarch as long as they are x86-64)
#
# Or use the _use_auto_optimization with _use_auto_optimization=y
-_processor_opt=${_processor_opt=}
+_processor_opt=${_processor_opt-}
-_use_auto_optimization=${_use_auto_optimization=y}
+_use_auto_optimization=${_use_auto_optimization-y}
# disable debug to lower the size of the kernel
-_disable_debug=${_disable_debug=y}
+_disable_debug=${_disable_debug-y}
## Enable zram/zswap ZSTD compression
-_zstd_compression=${_zstd_compression=y}
+_zstd_compression=${_zstd_compression-y}
### Selecting the ZSTD kernel and modules compression level
# ATTENTION - one of two predefined values should be selected!
@@ -131,12 +131,12 @@ _zstd_compression=${_zstd_compression=y}
# 'normal' - standard compression ratio
# WARNING: the ultra settings can sometimes
# be counterproductive in both size and speed.
-_zstd_level_value=${_zstd_level_value='normal'}
+_zstd_level_value=${_zstd_level_value-'normal'}
# Clang LTO mode, only available with the "llvm" compiler - options are "no", "full" or "thin".
# "full: uses 1 thread for Linking, slow and uses more memory, theoretically with the highest performance gains."
# "thin: uses multiple threads, faster and uses less memory, may have a lower runtime performance than Full."
-_use_llvm_lto=${_use_llvm_lto=}
+_use_llvm_lto=${_use_llvm_lto-}
# KCFI is a proposed forward-edge control-flow integrity scheme for
# Clang, which is more suitable for kernel use than the existing CFI
@@ -147,13 +147,13 @@ _use_llvm_lto=${_use_llvm_lto=}
# you can find a patched llvm-git in the cachyos-repo's.
# The packagename is called "llvm-kcfi"
# ATTENTION!: This is very experimental and could fail and the compilation or have other bugs in the kernel
-_use_kcfi=${_use_kcfi=}
+_use_kcfi=${_use_kcfi-}
# Build the zfs module builtin in to the kernel
-_build_zfs=${_build_zfs=}
+_build_zfs=${_build_zfs-}
# Enable bcachefs
-_bcachefs=${_bcachefs=}
+_bcachefs=${_bcachefs-}
# Enable NEST
# NEST is a experimental cfs scheduler you can find more about here:
@@ -163,7 +163,7 @@ _bcachefs=${_bcachefs=}
# taskset -c $THREADS application
# example: taskset -c 0-23 application
# ATTENTION!:Just works together with the BORE Scheduler and CFS Scheduler
-_nest=${_nest=}
+_nest=${_nest-}
# Enable LATENCY NICE
# Latency nice is a approach to sets latency-nice as a per-task attribute
@@ -174,7 +174,7 @@ _nest=${_nest=}
# You need to configure ananicy-cpp for this or use existing settings
# If you want to test it, use the following branch
# https://gitlab.com/ananicy-cpp/ananicy-cpp/-/tree/feature/latency-nice
-_latency_nice=${_latency_nice=}
+_latency_nice=${_latency_nice-}
if [ -n "$_use_llvm_lto" ]; then
pkgsuffix=cachyos-${_cpusched}-lto
diff --git a/linux-cachyos-rc/PKGBUILD b/linux-cachyos-rc/PKGBUILD
index 76690f92..1a84aa03 100644
--- a/linux-cachyos-rc/PKGBUILD
+++ b/linux-cachyos-rc/PKGBUILD
@@ -7,7 +7,7 @@
# ATTENTION - one of two predefined values should be selected!
# 'yes' - enable CachyOS config
# 'no' - disable CachyOS config
-_cachy_config=${_cachy_config='yes'}
+_cachy_config=${_cachy_config-'yes'}
### Selecting the CPU scheduler
# ATTENTION - one of seven predefined values should be selected!
@@ -19,27 +19,27 @@ _cachy_config=${_cachy_config='yes'}
# 'cfs' - select 'Completely Fair Scheduler'
# 'tt' - select 'Task Type Scheduler by Hamad Marri'
# 'hardened' - select 'BORE Scheduler hardened' ## kernel with hardened config and hardening patches with the bore scheduler
-_cpusched=${_cpusched='bore'}
+_cpusched=${_cpusched-'bore'}
### BUILD OPTIONS
# Set these variables to ANYTHING that is not null to enable them
### Tweak kernel options prior to a build via nconfig
-_makenconfig=${_makenconfig=}
+_makenconfig=${_makenconfig-}
### Tweak kernel options prior to a build via menuconfig
-_makemenuconfig=${_makemenuconfig=}
+_makemenuconfig=${_makemenuconfig-}
### Tweak kernel options prior to a build via xconfig
-_makexconfig=${_makexconfig=}
+_makexconfig=${_makexconfig-}
### Tweak kernel options prior to a build via gconfig
-_makegconfig=${_makegconfig=}
+_makegconfig=${_makegconfig-}
# NUMA is optimized for multi-socket motherboards.
# A single multi-core CPU actually runs slower with NUMA enabled.
# See, https://bugs.archlinux.org/task/31187
-_NUMAdisable=${_NUMAdisable=y}
+_NUMAdisable=${_NUMAdisable-y}
# Compile ONLY used modules to VASTLYreduce the number of modules built
# and the build time.
@@ -49,62 +49,62 @@ _NUMAdisable=${_NUMAdisable=y}
# This PKGBUILD read the database kept if it exists
#
# More at this wiki page ---> https://wiki.archlinux.org/index.php/Modprobed-db
-_localmodcfg=${_localmodcfg=}
+_localmodcfg=${_localmodcfg-}
# Use the current kernel's .config file
# Enabling this option will use the .config of the RUNNING kernel rather than
# the ARCH defaults. Useful when the package gets updated and you already went
# through the trouble of customizing your config options. NOT recommended when
# a new kernel is released, but again, convenient for package bumps.
-_use_current=${_use_current=}
+_use_current=${_use_current-}
### Enable KBUILD_CFLAGS -O3
-_cc_harder=${_cc_harder=y}
+_cc_harder=${_cc_harder-y}
### Set this to your number of threads you have in your machine otherwise it will default to 128
-_nr_cpus=${_nr_cpus=}
+_nr_cpus=${_nr_cpus-}
### Set performance governor as default
-_per_gov=${_per_gov=y}
+_per_gov=${_per_gov-y}
### Enable TCP_CONG_BBR2
_tcp_bbr2=${_tcp_bbr2=y}
### Running with a 1000HZ, 750Hz, 600 Hz, 500Hz, 300Hz, 250Hz and 100Hz tick rate
-_HZ_ticks=${_HZ_ticks=750}
+_HZ_ticks=${_HZ_ticks-750}
## Choose between perodic, idle or full
### Full tickless can give higher performances in various cases but, depending on hardware, lower consistency.
-_tickrate=${_tickrate=full}
+_tickrate=${_tickrate-full}
## Choose between full(low-latency), voluntary or server
-_preempt=${_preempt=full}
+_preempt=${_preempt-full}
### Disable MQ-Deadline I/O scheduler
-_mq_deadline_disable=${_mq_deadline_disable=y}
+_mq_deadline_disable=${_mq_deadline_disable-y}
### Disable Kyber I/O scheduler
-_kyber_disable=${_kyber_disable=y}
+_kyber_disable=${_kyber_disable-y}
### Enable multigenerational LRU
# ATTENTION - one of three predefined values should be selected!
# 'standard' - enable multigenerational LRU
# 'stats' - enable multigenerational LRU with stats
# 'none' - disable multigenerational LRU
-_lru_config=${_lru_config='standard'}
+_lru_config=${_lru_config-'standard'}
### Enable per-VMA locking
# ATTENTION - one of three predefined values should be selected!
# 'standard' - enable per-VMA locking
# 'stats' - enable per-VMA locking with stats
# 'none' - disable per-VMA locking
-_vma_config=${_vma_config='standard'}
+_vma_config=${_vma_config-'standard'}
## Enable DAMON
-_damon=${_damon=}
+_damon=${_damon-}
## Enable Linux Random Number Generator
-_lrng_enable=${_lrng_enable=y}
+_lrng_enable=${_lrng_enable-y}
# CPU compiler optimizations - Defaults to prompt at kernel config if left empty
# AMD CPUs : "k8" "k8sse3" "k10" "barcelona" "bobcat" "jaguar" "bulldozer" "piledriver" "steamroller" "excavator" "zen" "zen2" "zen3"
@@ -115,15 +115,15 @@ _lrng_enable=${_lrng_enable=y}
# - "generic" (kernel's default - to share the package between machines with different CPU µarch as long as they are x86-64)
#
# Or use the _use_auto_optimization with _use_auto_optimization=y
-_processor_opt=${_processor_opt=}
+_processor_opt=${_processor_opt-}
-_use_auto_optimization=${_use_auto_optimization=y}
+_use_auto_optimization=${_use_auto_optimization-y}
# disable debug to lower the size of the kernel
-_disable_debug=${_disable_debug=y}
+_disable_debug=${_disable_debug-y}
## Enable zram/zswap ZSTD compression
-_zstd_compression=${_zstd_compression=y}
+_zstd_compression=${_zstd_compression-y}
### Selecting the ZSTD kernel and modules compression level
# ATTENTION - one of two predefined values should be selected!
@@ -131,12 +131,12 @@ _zstd_compression=${_zstd_compression=y}
# 'normal' - standard compression ratio
# WARNING: the ultra settings can sometimes
# be counterproductive in both size and speed.
-_zstd_level_value=${_zstd_level_value='normal'}
+_zstd_level_value=${_zstd_level_value-'normal'}
# Clang LTO mode, only available with the "llvm" compiler - options are "no", "full" or "thin".
# "full: uses 1 thread for Linking, slow and uses more memory, theoretically with the highest performance gains."
# "thin: uses multiple threads, faster and uses less memory, may have a lower runtime performance than Full."
-_use_llvm_lto=${_use_llvm_lto=}
+_use_llvm_lto=${_use_llvm_lto-}
# KCFI is a proposed forward-edge control-flow integrity scheme for
# Clang, which is more suitable for kernel use than the existing CFI
@@ -147,16 +147,16 @@ _use_llvm_lto=${_use_llvm_lto=}
# you can find a patched llvm-git in the cachyos-repo's.
# The packagename is called "llvm-kcfi"
# ATTENTION!: This is very experimental and could fail and the compilation or have other bugs in the kernel
-_use_kcfi=${_use_kcfi=}
+_use_kcfi=${_use_kcfi-}
# Build the zfs module builtin in to the kernel
-_build_zfs=${_build_zfs=}
+_build_zfs=${_build_zfs-}
# Enable bcachefs
-_bcachefs=${_bcachefs=}
+_bcachefs=${_bcachefs-}
# Enable RT kernel
-_rtkernel=${_rtkernel=}
+_rtkernel=${_rtkernel-}
# Enable NEST
# NEST is a experimental cfs scheduler you can find more about here:
@@ -166,7 +166,7 @@ _rtkernel=${_rtkernel=}
# taskset -c $THREADS application
# example: taskset -c 0-23 application
# ATTENTION!:Just works together with the BORE Scheduler and CFS Scheduler
-_nest=${_nest=}
+_nest=${_nest-}
# Enable LATENCY NICE
# Latency nice is a approach to sets latency-nice as a per-task attribute
diff --git a/linux-cachyos-tt/PKGBUILD b/linux-cachyos-tt/PKGBUILD
index 8690c77c..8e18c5d7 100644
--- a/linux-cachyos-tt/PKGBUILD
+++ b/linux-cachyos-tt/PKGBUILD
@@ -7,7 +7,7 @@
# ATTENTION - one of two predefined values should be selected!
# 'yes' - enable CachyOS config
# 'no' - disable CachyOS config
-_cachy_config=${_cachy_config='yes'}
+_cachy_config=${_cachy_config-'yes'}
### Selecting the CPU scheduler
# ATTENTION - one of seven predefined values should be selected!
@@ -19,27 +19,27 @@ _cachy_config=${_cachy_config='yes'}
# 'cfs' - select 'Completely Fair Scheduler'
# 'tt' - select 'Task Type Scheduler by Hamad Marri'
# 'hardened' - select 'BORE Scheduler hardened' ## kernel with hardened config and hardening patches with the bore scheduler
-_cpusched=${_cpusched='tt'}
+_cpusched=${_cpusched-'tt'}
### BUILD OPTIONS
# Set these variables to ANYTHING that is not null to enable them
### Tweak kernel options prior to a build via nconfig
-_makenconfig=${_makenconfig=}
+_makenconfig=${_makenconfig-}
### Tweak kernel options prior to a build via menuconfig
-_makemenuconfig=${_makemenuconfig=}
+_makemenuconfig=${_makemenuconfig-}
### Tweak kernel options prior to a build via xconfig
-_makexconfig=${_makexconfig=}
+_makexconfig=${_makexconfig-}
### Tweak kernel options prior to a build via gconfig
-_makegconfig=${_makegconfig=}
+_makegconfig=${_makegconfig-}
# NUMA is optimized for multi-socket motherboards.
# A single multi-core CPU actually runs slower with NUMA enabled.
# See, https://bugs.archlinux.org/task/31187
-_NUMAdisable=${_NUMAdisable=y}
+_NUMAdisable=${_NUMAdisable-y}
# Compile ONLY used modules to VASTLYreduce the number of modules built
# and the build time.
@@ -49,62 +49,62 @@ _NUMAdisable=${_NUMAdisable=y}
# This PKGBUILD read the database kept if it exists
#
# More at this wiki page ---> https://wiki.archlinux.org/index.php/Modprobed-db
-_localmodcfg=${_localmodcfg=}
+_localmodcfg=${_localmodcfg-}
# Use the current kernel's .config file
# Enabling this option will use the .config of the RUNNING kernel rather than
# the ARCH defaults. Useful when the package gets updated and you already went
# through the trouble of customizing your config options. NOT recommended when
# a new kernel is released, but again, convenient for package bumps.
-_use_current=${_use_current=}
+_use_current=${_use_current-}
### Enable KBUILD_CFLAGS -O3
-_cc_harder=${_cc_harder=y}
+_cc_harder=${_cc_harder-y}
### Set this to your number of threads you have in your machine otherwise it will default to 128
-_nr_cpus=${_nr_cpus=}
+_nr_cpus=${_nr_cpus-}
### Set performance governor as default
-_per_gov=${_per_gov=y}
+_per_gov=${_per_gov-y}
### Enable TCP_CONG_BBR2
_tcp_bbr2=${_tcp_bbr2=y}
### Running with a 1000HZ, 750Hz, 600 Hz, 500Hz, 300Hz, 250Hz and 100Hz tick rate
-_HZ_ticks=${_HZ_ticks=750}
+_HZ_ticks=${_HZ_ticks-750}
## Choose between perodic, idle or full
### Full tickless can give higher performances in various cases but, depending on hardware, lower consistency.
-_tickrate=${_tickrate=full}
+_tickrate=${_tickrate-full}
## Choose between full(low-latency), voluntary or server
-_preempt=${_preempt=full}
+_preempt=${_preempt-full}
### Disable MQ-Deadline I/O scheduler
-_mq_deadline_disable=${_mq_deadline_disable=y}
+_mq_deadline_disable=${_mq_deadline_disable-y}
### Disable Kyber I/O scheduler
-_kyber_disable=${_kyber_disable=y}
+_kyber_disable=${_kyber_disable-y}
### Enable multigenerational LRU
# ATTENTION - one of three predefined values should be selected!
# 'standard' - enable multigenerational LRU
# 'stats' - enable multigenerational LRU with stats
# 'none' - disable multigenerational LRU
-_lru_config=${_lru_config='standard'}
+_lru_config=${_lru_config-'standard'}
### Enable per-VMA locking
# ATTENTION - one of three predefined values should be selected!
# 'standard' - enable per-VMA locking
# 'stats' - enable per-VMA locking with stats
# 'none' - disable per-VMA locking
-_vma_config=${_vma_config='standard'}
+_vma_config=${_vma_config-'standard'}
## Enable DAMON
-_damon=${_damon=}
+_damon=${_damon-}
## Enable Linux Random Number Generator
-_lrng_enable=${_lrng_enable=y}
+_lrng_enable=${_lrng_enable-y}
# CPU compiler optimizations - Defaults to prompt at kernel config if left empty
# AMD CPUs : "k8" "k8sse3" "k10" "barcelona" "bobcat" "jaguar" "bulldozer" "piledriver" "steamroller" "excavator" "zen" "zen2" "zen3"
@@ -115,15 +115,15 @@ _lrng_enable=${_lrng_enable=y}
# - "generic" (kernel's default - to share the package between machines with different CPU µarch as long as they are x86-64)
#
# Or use the _use_auto_optimization with _use_auto_optimization=y
-_processor_opt=${_processor_opt=}
+_processor_opt=${_processor_opt-}
-_use_auto_optimization=${_use_auto_optimization=y}
+_use_auto_optimization=${_use_auto_optimization-y}
# disable debug to lower the size of the kernel
-_disable_debug=${_disable_debug=y}
+_disable_debug=${_disable_debug-y}
## Enable zram/zswap ZSTD compression
-_zstd_compression=${_zstd_compression=y}
+_zstd_compression=${_zstd_compression-y}
### Selecting the ZSTD kernel and modules compression level
# ATTENTION - one of two predefined values should be selected!
@@ -131,12 +131,12 @@ _zstd_compression=${_zstd_compression=y}
# 'normal' - standard compression ratio
# WARNING: the ultra settings can sometimes
# be counterproductive in both size and speed.
-_zstd_level_value=${_zstd_level_value='normal'}
+_zstd_level_value=${_zstd_level_value-'normal'}
# Clang LTO mode, only available with the "llvm" compiler - options are "no", "full" or "thin".
# "full: uses 1 thread for Linking, slow and uses more memory, theoretically with the highest performance gains."
# "thin: uses multiple threads, faster and uses less memory, may have a lower runtime performance than Full."
-_use_llvm_lto=${_use_llvm_lto=}
+_use_llvm_lto=${_use_llvm_lto-}
# KCFI is a proposed forward-edge control-flow integrity scheme for
# Clang, which is more suitable for kernel use than the existing CFI
@@ -147,13 +147,13 @@ _use_llvm_lto=${_use_llvm_lto=}
# you can find a patched llvm-git in the cachyos-repo's.
# The packagename is called "llvm-kcfi"
# ATTENTION!: This is very experimental and could fail and the compilation or have other bugs in the kernel
-_use_kcfi=${_use_kcfi=}
+_use_kcfi=${_use_kcfi-}
# Build the zfs module builtin in to the kernel
-_build_zfs=${_build_zfs=}
+_build_zfs=${_build_zfs-}
# Enable bcachefs
-_bcachefs=${_bcachefs=}
+_bcachefs=${_bcachefs-}
# Enable NEST
# NEST is a experimental cfs scheduler you can find more about here:
@@ -163,7 +163,7 @@ _bcachefs=${_bcachefs=}
# taskset -c $THREADS application
# example: taskset -c 0-23 application
# ATTENTION!:Just works together with the BORE Scheduler and CFS Scheduler
-_nest=${_nest=}
+_nest=${_nest-}
# Enable LATENCY NICE
# Latency nice is a approach to sets latency-nice as a per-task attribute
@@ -174,7 +174,7 @@ _nest=${_nest=}
# You need to configure ananicy-cpp for this or use existing settings
# If you want to test it, use the following branch
# https://gitlab.com/ananicy-cpp/ananicy-cpp/-/tree/feature/latency-nice
-_latency_nice=${_latency_nice=}
+_latency_nice=${_latency_nice-}
if [ -n "$_use_llvm_lto" ]; then
pkgsuffix=cachyos-${_cpusched}-lto
diff --git a/linux-cachyos/PKGBUILD b/linux-cachyos/PKGBUILD
index bbbc2507..1e96aab5 100644
--- a/linux-cachyos/PKGBUILD
+++ b/linux-cachyos/PKGBUILD
@@ -7,7 +7,7 @@
# ATTENTION - one of two predefined values should be selected!
# 'yes' - enable CachyOS config
# 'no' - disable CachyOS config
-_cachy_config=${_cachy_config='yes'}
+_cachy_config=${_cachy_config-'yes'}
### Selecting the CPU scheduler
# ATTENTION - one of seven predefined values should be selected!
@@ -19,27 +19,27 @@ _cachy_config=${_cachy_config='yes'}
# 'cfs' - select 'Completely Fair Scheduler'
# 'tt' - select 'Task Type Scheduler by Hamad Marri'
# 'hardened' - select 'BORE Scheduler hardened' ## kernel with hardened config and hardening patches with the bore scheduler
-_cpusched=${_cpusched='bore'}
+_cpusched=${_cpusched-'bore'}
### BUILD OPTIONS
# Set these variables to ANYTHING that is not null to enable them
### Tweak kernel options prior to a build via nconfig
-_makenconfig=${_makenconfig=}
+_makenconfig=${_makenconfig-}
### Tweak kernel options prior to a build via menuconfig
-_makemenuconfig=${_makemenuconfig=}
+_makemenuconfig=${_makemenuconfig-}
### Tweak kernel options prior to a build via xconfig
-_makexconfig=${_makexconfig=}
+_makexconfig=${_makexconfig-}
### Tweak kernel options prior to a build via gconfig
-_makegconfig=${_makegconfig=}
+_makegconfig=${_makegconfig-}
# NUMA is optimized for multi-socket motherboards.
# A single multi-core CPU actually runs slower with NUMA enabled.
# See, https://bugs.archlinux.org/task/31187
-_NUMAdisable=${_NUMAdisable=y}
+_NUMAdisable=${_NUMAdisable-y}
# Compile ONLY used modules to VASTLYreduce the number of modules built
# and the build time.
@@ -49,62 +49,62 @@ _NUMAdisable=${_NUMAdisable=y}
# This PKGBUILD read the database kept if it exists
#
# More at this wiki page ---> https://wiki.archlinux.org/index.php/Modprobed-db
-_localmodcfg=${_localmodcfg=}
+_localmodcfg=${_localmodcfg-}
# Use the current kernel's .config file
# Enabling this option will use the .config of the RUNNING kernel rather than
# the ARCH defaults. Useful when the package gets updated and you already went
# through the trouble of customizing your config options. NOT recommended when
# a new kernel is released, but again, convenient for package bumps.
-_use_current=${_use_current=}
+_use_current=${_use_current-}
### Enable KBUILD_CFLAGS -O3
-_cc_harder=${_cc_harder=y}
+_cc_harder=${_cc_harder-y}
### Set this to your number of threads you have in your machine otherwise it will default to 128
-_nr_cpus=${_nr_cpus=}
+_nr_cpus=${_nr_cpus-}
### Set performance governor as default
-_per_gov=${_per_gov=y}
+_per_gov=${_per_gov-y}
### Enable TCP_CONG_BBR2
_tcp_bbr2=${_tcp_bbr2=y}
### Running with a 1000HZ, 750Hz, 600 Hz, 500Hz, 300Hz, 250Hz and 100Hz tick rate
-_HZ_ticks=${_HZ_ticks=750}
+_HZ_ticks=${_HZ_ticks-750}
## Choose between perodic, idle or full
### Full tickless can give higher performances in various cases but, depending on hardware, lower consistency.
-_tickrate=${_tickrate=full}
+_tickrate=${_tickrate-full}
## Choose between full(low-latency), voluntary or server
-_preempt=${_preempt=full}
+_preempt=${_preempt-full}
### Disable MQ-Deadline I/O scheduler
-_mq_deadline_disable=${_mq_deadline_disable=y}
+_mq_deadline_disable=${_mq_deadline_disable-y}
### Disable Kyber I/O scheduler
-_kyber_disable=${_kyber_disable=y}
+_kyber_disable=${_kyber_disable-y}
### Enable multigenerational LRU
# ATTENTION - one of three predefined values should be selected!
# 'standard' - enable multigenerational LRU
# 'stats' - enable multigenerational LRU with stats
# 'none' - disable multigenerational LRU
-_lru_config=${_lru_config='standard'}
+_lru_config=${_lru_config-'standard'}
### Enable per-VMA locking
# ATTENTION - one of three predefined values should be selected!
# 'standard' - enable per-VMA locking
# 'stats' - enable per-VMA locking with stats
# 'none' - disable per-VMA locking
-_vma_config=${_vma_config='standard'}
+_vma_config=${_vma_config-'standard'}
## Enable DAMON
-_damon=${_damon=}
+_damon=${_damon-}
## Enable Linux Random Number Generator
-_lrng_enable=${_lrng_enable=y}
+_lrng_enable=${_lrng_enable-y}
# CPU compiler optimizations - Defaults to prompt at kernel config if left empty
# AMD CPUs : "k8" "k8sse3" "k10" "barcelona" "bobcat" "jaguar" "bulldozer" "piledriver" "steamroller" "excavator" "zen" "zen2" "zen3"
@@ -115,15 +115,15 @@ _lrng_enable=${_lrng_enable=y}
# - "generic" (kernel's default - to share the package between machines with different CPU µarch as long as they are x86-64)
#
# Or use the _use_auto_optimization with _use_auto_optimization=y
-_processor_opt=${_processor_opt=}
+_processor_opt=${_processor_opt-}
-_use_auto_optimization=${_use_auto_optimization=y}
+_use_auto_optimization=${_use_auto_optimization-y}
# disable debug to lower the size of the kernel
-_disable_debug=${_disable_debug=y}
+_disable_debug=${_disable_debug-y}
## Enable zram/zswap ZSTD compression
-_zstd_compression=${_zstd_compression=y}
+_zstd_compression=${_zstd_compression-y}
### Selecting the ZSTD kernel and modules compression level
# ATTENTION - one of two predefined values should be selected!
@@ -131,12 +131,12 @@ _zstd_compression=${_zstd_compression=y}
# 'normal' - standard compression ratio
# WARNING: the ultra settings can sometimes
# be counterproductive in both size and speed.
-_zstd_level_value=${_zstd_level_value='normal'}
+_zstd_level_value=${_zstd_level_value-'normal'}
# Clang LTO mode, only available with the "llvm" compiler - options are "no", "full" or "thin".
# "full: uses 1 thread for Linking, slow and uses more memory, theoretically with the highest performance gains."
# "thin: uses multiple threads, faster and uses less memory, may have a lower runtime performance than Full."
-_use_llvm_lto=${_use_llvm_lto=}
+_use_llvm_lto=${_use_llvm_lto-}
# KCFI is a proposed forward-edge control-flow integrity scheme for
# Clang, which is more suitable for kernel use than the existing CFI
@@ -147,13 +147,13 @@ _use_llvm_lto=${_use_llvm_lto=}
# you can find a patched llvm-git in the cachyos-repo's.
# The packagename is called "llvm-kcfi"
# ATTENTION!: This is very experimental and could fail and the compilation or have other bugs in the kernel
-_use_kcfi=${_use_kcfi=}
+_use_kcfi=${_use_kcfi-}
# Build the zfs module builtin in to the kernel
-_build_zfs=${_build_zfs=}
+_build_zfs=${_build_zfs-}
# Enable bcachefs
-_bcachefs=${_bcachefs=}
+_bcachefs=${_bcachefs-}
# Enable NEST
# NEST is a experimental cfs scheduler you can find more about here:
@@ -163,7 +163,7 @@ _bcachefs=${_bcachefs=}
# taskset -c $THREADS application
# example: taskset -c 0-23 application
# ATTENTION!:Just works together with the BORE Scheduler and CFS Scheduler
-_nest=${_nest=}
+_nest=${_nest-}
# Enable LATENCY NICE
# Latency nice is a approach to sets latency-nice as a per-task attribute
@@ -174,7 +174,7 @@ _nest=${_nest=}
# You need to configure ananicy-cpp for this or use existing settings
# If you want to test it, use the following branch
# https://gitlab.com/ananicy-cpp/ananicy-cpp/-/tree/feature/latency-nice
-_latency_nice=${_latency_nice=}
+_latency_nice=${_latency_nice-}
if [ -n "$_use_llvm_lto" ]; then
pkgsuffix=cachyos-lto
diff --git a/linux-cacule-rdb/PKGBUILD b/linux-cacule-rdb/PKGBUILD
index 2ab0606e..145b3b69 100644
--- a/linux-cacule-rdb/PKGBUILD
+++ b/linux-cacule-rdb/PKGBUILD
@@ -7,7 +7,7 @@
# ATTENTION - one of two predefined values should be selected!
# 'yes' - enable CachyOS config
# 'no' - disable CachyOS config
-_cachy_config=${_cachy_config='yes'}
+_cachy_config=${_cachy_config-'yes'}
### Selecting the CPU scheduler
# ATTENTION - one of seven predefined values should be selected!
@@ -19,27 +19,27 @@ _cachy_config=${_cachy_config='yes'}
# 'cfs' - select 'Completely Fair Scheduler'
# 'tt' - select 'Task Type Scheduler by Hamad Marri'
# 'hardened' - select 'BORE Scheduler hardened' ## kernel with hardened config and hardening patches with the bore scheduler
-_cpusched=${_cpusched='cacule-rdb'}
+_cpusched=${_cpusched-'cacule-rdb'}
### BUILD OPTIONS
# Set these variables to ANYTHING that is not null to enable them
### Tweak kernel options prior to a build via nconfig
-_makenconfig=${_makenconfig=}
+_makenconfig=${_makenconfig-}
### Tweak kernel options prior to a build via menuconfig
-_makemenuconfig=${_makemenuconfig=}
+_makemenuconfig=${_makemenuconfig-}
### Tweak kernel options prior to a build via xconfig
-_makexconfig=${_makexconfig=}
+_makexconfig=${_makexconfig-}
### Tweak kernel options prior to a build via gconfig
-_makegconfig=${_makegconfig=}
+_makegconfig=${_makegconfig-}
# NUMA is optimized for multi-socket motherboards.
# A single multi-core CPU actually runs slower with NUMA enabled.
# See, https://bugs.archlinux.org/task/31187
-_NUMAdisable=${_NUMAdisable=y}
+_NUMAdisable=${_NUMAdisable-y}
# Compile ONLY used modules to VASTLYreduce the number of modules built
# and the build time.
@@ -49,62 +49,62 @@ _NUMAdisable=${_NUMAdisable=y}
# This PKGBUILD read the database kept if it exists
#
# More at this wiki page ---> https://wiki.archlinux.org/index.php/Modprobed-db
-_localmodcfg=${_localmodcfg=}
+_localmodcfg=${_localmodcfg-}
# Use the current kernel's .config file
# Enabling this option will use the .config of the RUNNING kernel rather than
# the ARCH defaults. Useful when the package gets updated and you already went
# through the trouble of customizing your config options. NOT recommended when
# a new kernel is released, but again, convenient for package bumps.
-_use_current=${_use_current=}
+_use_current=${_use_current-}
### Enable KBUILD_CFLAGS -O3
-_cc_harder=${_cc_harder=y}
+_cc_harder=${_cc_harder-y}
### Set this to your number of threads you have in your machine otherwise it will default to 128
-_nr_cpus=${_nr_cpus=}
+_nr_cpus=${_nr_cpus-}
### Set performance governor as default
-_per_gov=${_per_gov=y}
+_per_gov=${_per_gov-y}
### Enable TCP_CONG_BBR2
_tcp_bbr2=${_tcp_bbr2=y}
### Running with a 1000HZ, 750Hz, 600 Hz, 500Hz, 300Hz, 250Hz and 100Hz tick rate
-_HZ_ticks=${_HZ_ticks=750}
+_HZ_ticks=${_HZ_ticks-750}
## Choose between perodic, idle or full
### Full tickless can give higher performances in various cases but, depending on hardware, lower consistency.
-_tickrate=${_tickrate=full}
+_tickrate=${_tickrate-full}
## Choose between full(low-latency), voluntary or server
-_preempt=${_preempt=full}
+_preempt=${_preempt-full}
### Disable MQ-Deadline I/O scheduler
-_mq_deadline_disable=${_mq_deadline_disable=y}
+_mq_deadline_disable=${_mq_deadline_disable-y}
### Disable Kyber I/O scheduler
-_kyber_disable=${_kyber_disable=y}
+_kyber_disable=${_kyber_disable-y}
### Enable multigenerational LRU
# ATTENTION - one of three predefined values should be selected!
# 'standard' - enable multigenerational LRU
# 'stats' - enable multigenerational LRU with stats
# 'none' - disable multigenerational LRU
-_lru_config=${_lru_config='standard'}
+_lru_config=${_lru_config-'standard'}
### Enable per-VMA locking
# ATTENTION - one of three predefined values should be selected!
# 'standard' - enable per-VMA locking
# 'stats' - enable per-VMA locking with stats
# 'none' - disable per-VMA locking
-_vma_config=${_vma_config='standard'}
+_vma_config=${_vma_config-'standard'}
## Enable DAMON
-_damon=${_damon=}
+_damon=${_damon-}
## Enable Linux Random Number Generator
-_lrng_enable=${_lrng_enable=y}
+_lrng_enable=${_lrng_enable-y}
# CPU compiler optimizations - Defaults to prompt at kernel config if left empty
# AMD CPUs : "k8" "k8sse3" "k10" "barcelona" "bobcat" "jaguar" "bulldozer" "piledriver" "steamroller" "excavator" "zen" "zen2" "zen3"
@@ -115,15 +115,15 @@ _lrng_enable=${_lrng_enable=y}
# - "generic" (kernel's default - to share the package between machines with different CPU µarch as long as they are x86-64)
#
# Or use the _use_auto_optimization with _use_auto_optimization=y
-_processor_opt=${_processor_opt=}
+_processor_opt=${_processor_opt-}
-_use_auto_optimization=${_use_auto_optimization=y}
+_use_auto_optimization=${_use_auto_optimization-y}
# disable debug to lower the size of the kernel
-_disable_debug=${_disable_debug=y}
+_disable_debug=${_disable_debug-y}
## Enable zram/zswap ZSTD compression
-_zstd_compression=${_zstd_compression=y}
+_zstd_compression=${_zstd_compression-y}
### Selecting the ZSTD kernel and modules compression level
# ATTENTION - one of two predefined values should be selected!
@@ -131,12 +131,12 @@ _zstd_compression=${_zstd_compression=y}
# 'normal' - standard compression ratio
# WARNING: the ultra settings can sometimes
# be counterproductive in both size and speed.
-_zstd_level_value=${_zstd_level_value='normal'}
+_zstd_level_value=${_zstd_level_value-'normal'}
# Clang LTO mode, only available with the "llvm" compiler - options are "no", "full" or "thin".
# "full: uses 1 thread for Linking, slow and uses more memory, theoretically with the highest performance gains."
# "thin: uses multiple threads, faster and uses less memory, may have a lower runtime performance than Full."
-_use_llvm_lto=${_use_llvm_lto=}
+_use_llvm_lto=${_use_llvm_lto-}
# KCFI is a proposed forward-edge control-flow integrity scheme for
# Clang, which is more suitable for kernel use than the existing CFI
@@ -147,13 +147,13 @@ _use_llvm_lto=${_use_llvm_lto=}
# you can find a patched llvm-git in the cachyos-repo's.
# The packagename is called "llvm-kcfi"
# ATTENTION!: This is very experimental and could fail and the compilation or have other bugs in the kernel
-_use_kcfi=${_use_kcfi=}
+_use_kcfi=${_use_kcfi-}
# Build the zfs module builtin in to the kernel
-_build_zfs=${_build_zfs=}
+_build_zfs=${_build_zfs-}
# Enable bcachefs
-_bcachefs=${_bcachefs=}
+_bcachefs=${_bcachefs-}
# Enable NEST
# NEST is a experimental cfs scheduler you can find more about here:
@@ -163,7 +163,7 @@ _bcachefs=${_bcachefs=}
# taskset -c $THREADS application
# example: taskset -c 0-23 application
# ATTENTION!:Just works together with the BORE Scheduler and CFS Scheduler
-_nest=${_nest=}
+_nest=${_nest-}
# Enable LATENCY NICE
# Latency nice is a approach to sets latency-nice as a per-task attribute
@@ -174,7 +174,7 @@ _nest=${_nest=}
# You need to configure ananicy-cpp for this or use existing settings
# If you want to test it, use the following branch
# https://gitlab.com/ananicy-cpp/ananicy-cpp/-/tree/feature/latency-nice
-_latency_nice=${_latency_nice=}
+_latency_nice=${_latency_nice-}
if [ -n "$_use_llvm_lto" ]; then
pkgsuffix=${_cpusched}-lto
diff --git a/linux-cacule/PKGBUILD b/linux-cacule/PKGBUILD
index d5d83f63..8b417354 100644
--- a/linux-cacule/PKGBUILD
+++ b/linux-cacule/PKGBUILD
@@ -7,7 +7,7 @@
# ATTENTION - one of two predefined values should be selected!
# 'yes' - enable CachyOS config
# 'no' - disable CachyOS config
-_cachy_config=${_cachy_config='yes'}
+_cachy_config=${_cachy_config-'yes'}
### Selecting the CPU scheduler
# ATTENTION - one of seven predefined values should be selected!
@@ -19,27 +19,27 @@ _cachy_config=${_cachy_config='yes'}
# 'cfs' - select 'Completely Fair Scheduler'
# 'tt' - select 'Task Type Scheduler by Hamad Marri'
# 'hardened' - select 'BORE Scheduler hardened' ## kernel with hardened config and hardening patches with the bore scheduler
-_cpusched=${_cpusched='cacule'}
+_cpusched=${_cpusched-'cacule'}
### BUILD OPTIONS
# Set these variables to ANYTHING that is not null to enable them
### Tweak kernel options prior to a build via nconfig
-_makenconfig=${_makenconfig=}
+_makenconfig=${_makenconfig-}
### Tweak kernel options prior to a build via menuconfig
-_makemenuconfig=${_makemenuconfig=}
+_makemenuconfig=${_makemenuconfig-}
### Tweak kernel options prior to a build via xconfig
-_makexconfig=${_makexconfig=}
+_makexconfig=${_makexconfig-}
### Tweak kernel options prior to a build via gconfig
-_makegconfig=${_makegconfig=}
+_makegconfig=${_makegconfig-}
# NUMA is optimized for multi-socket motherboards.
# A single multi-core CPU actually runs slower with NUMA enabled.
# See, https://bugs.archlinux.org/task/31187
-_NUMAdisable=${_NUMAdisable=y}
+_NUMAdisable=${_NUMAdisable-y}
# Compile ONLY used modules to VASTLYreduce the number of modules built
# and the build time.
@@ -49,62 +49,62 @@ _NUMAdisable=${_NUMAdisable=y}
# This PKGBUILD read the database kept if it exists
#
# More at this wiki page ---> https://wiki.archlinux.org/index.php/Modprobed-db
-_localmodcfg=${_localmodcfg=}
+_localmodcfg=${_localmodcfg-}
# Use the current kernel's .config file
# Enabling this option will use the .config of the RUNNING kernel rather than
# the ARCH defaults. Useful when the package gets updated and you already went
# through the trouble of customizing your config options. NOT recommended when
# a new kernel is released, but again, convenient for package bumps.
-_use_current=${_use_current=}
+_use_current=${_use_current-}
### Enable KBUILD_CFLAGS -O3
-_cc_harder=${_cc_harder=y}
+_cc_harder=${_cc_harder-y}
### Set this to your number of threads you have in your machine otherwise it will default to 128
-_nr_cpus=${_nr_cpus=}
+_nr_cpus=${_nr_cpus-}
### Set performance governor as default
-_per_gov=${_per_gov=y}
+_per_gov=${_per_gov-y}
### Enable TCP_CONG_BBR2
_tcp_bbr2=${_tcp_bbr2=y}
### Running with a 1000HZ, 750Hz, 600 Hz, 500Hz, 300Hz, 250Hz and 100Hz tick rate
-_HZ_ticks=${_HZ_ticks=750}
+_HZ_ticks=${_HZ_ticks-750}
## Choose between perodic, idle or full
### Full tickless can give higher performances in various cases but, depending on hardware, lower consistency.
-_tickrate=${_tickrate=full}
+_tickrate=${_tickrate-full}
## Choose between full(low-latency), voluntary or server
-_preempt=${_preempt=full}
+_preempt=${_preempt-full}
### Disable MQ-Deadline I/O scheduler
-_mq_deadline_disable=${_mq_deadline_disable=y}
+_mq_deadline_disable=${_mq_deadline_disable-y}
### Disable Kyber I/O scheduler
-_kyber_disable=${_kyber_disable=y}
+_kyber_disable=${_kyber_disable-y}
### Enable multigenerational LRU
# ATTENTION - one of three predefined values should be selected!
# 'standard' - enable multigenerational LRU
# 'stats' - enable multigenerational LRU with stats
# 'none' - disable multigenerational LRU
-_lru_config=${_lru_config='standard'}
+_lru_config=${_lru_config-'standard'}
### Enable per-VMA locking
# ATTENTION - one of three predefined values should be selected!
# 'standard' - enable per-VMA locking
# 'stats' - enable per-VMA locking with stats
# 'none' - disable per-VMA locking
-_vma_config=${_vma_config='standard'}
+_vma_config=${_vma_config-'standard'}
## Enable DAMON
-_damon=${_damon=}
+_damon=${_damon-}
## Enable Linux Random Number Generator
-_lrng_enable=${_lrng_enable=y}
+_lrng_enable=${_lrng_enable-y}
# CPU compiler optimizations - Defaults to prompt at kernel config if left empty
# AMD CPUs : "k8" "k8sse3" "k10" "barcelona" "bobcat" "jaguar" "bulldozer" "piledriver" "steamroller" "excavator" "zen" "zen2" "zen3"
@@ -115,15 +115,15 @@ _lrng_enable=${_lrng_enable=y}
# - "generic" (kernel's default - to share the package between machines with different CPU µarch as long as they are x86-64)
#
# Or use the _use_auto_optimization with _use_auto_optimization=y
-_processor_opt=${_processor_opt=}
+_processor_opt=${_processor_opt-}
-_use_auto_optimization=${_use_auto_optimization=y}
+_use_auto_optimization=${_use_auto_optimization-y}
# disable debug to lower the size of the kernel
-_disable_debug=${_disable_debug=y}
+_disable_debug=${_disable_debug-y}
## Enable zram/zswap ZSTD compression
-_zstd_compression=${_zstd_compression=y}
+_zstd_compression=${_zstd_compression-y}
### Selecting the ZSTD kernel and modules compression level
# ATTENTION - one of two predefined values should be selected!
@@ -131,12 +131,12 @@ _zstd_compression=${_zstd_compression=y}
# 'normal' - standard compression ratio
# WARNING: the ultra settings can sometimes
# be counterproductive in both size and speed.
-_zstd_level_value=${_zstd_level_value='normal'}
+_zstd_level_value=${_zstd_level_value-'normal'}
# Clang LTO mode, only available with the "llvm" compiler - options are "no", "full" or "thin".
# "full: uses 1 thread for Linking, slow and uses more memory, theoretically with the highest performance gains."
# "thin: uses multiple threads, faster and uses less memory, may have a lower runtime performance than Full."
-_use_llvm_lto=${_use_llvm_lto=}
+_use_llvm_lto=${_use_llvm_lto-}
# KCFI is a proposed forward-edge control-flow integrity scheme for
# Clang, which is more suitable for kernel use than the existing CFI
@@ -147,13 +147,13 @@ _use_llvm_lto=${_use_llvm_lto=}
# you can find a patched llvm-git in the cachyos-repo's.
# The packagename is called "llvm-kcfi"
# ATTENTION!: This is very experimental and could fail and the compilation or have other bugs in the kernel
-_use_kcfi=${_use_kcfi=}
+_use_kcfi=${_use_kcfi-}
# Build the zfs module builtin in to the kernel
-_build_zfs=${_build_zfs=}
+_build_zfs=${_build_zfs-}
# Enable bcachefs
-_bcachefs=${_bcachefs=}
+_bcachefs=${_bcachefs-}
# Enable NEST
# NEST is a experimental cfs scheduler you can find more about here:
@@ -163,7 +163,7 @@ _bcachefs=${_bcachefs=}
# taskset -c $THREADS application
# example: taskset -c 0-23 application
# ATTENTION!:Just works together with the BORE Scheduler and CFS Scheduler
-_nest=${_nest=}
+_nest=${_nest-}
# Enable LATENCY NICE
# Latency nice is a approach to sets latency-nice as a per-task attribute
@@ -174,7 +174,7 @@ _nest=${_nest=}
# You need to configure ananicy-cpp for this or use existing settings
# If you want to test it, use the following branch
# https://gitlab.com/ananicy-cpp/ananicy-cpp/-/tree/feature/latency-nice
-_latency_nice=${_latency_nice=}
+_latency_nice=${_latency_nice-}
if [ -n "$_use_llvm_lto" ]; then
pkgsuffix=${_cpusched}-lto
diff --git a/linux-tt/PKGBUILD b/linux-tt/PKGBUILD
index 717adc2d..78f3a953 100644
--- a/linux-tt/PKGBUILD
+++ b/linux-tt/PKGBUILD
@@ -7,7 +7,7 @@
# ATTENTION - one of two predefined values should be selected!
# 'yes' - enable CachyOS config
# 'no' - disable CachyOS config
-_cachy_config=${_cachy_config='yes'}
+_cachy_config=${_cachy_config-'yes'}
### Selecting the CPU scheduler
# ATTENTION - one of seven predefined values should be selected!
@@ -19,27 +19,27 @@ _cachy_config=${_cachy_config='yes'}
# 'cfs' - select 'Completely Fair Scheduler'
# 'tt' - select 'Task Type Scheduler by Hamad Marri'
# 'hardened' - select 'BORE Scheduler hardened' ## kernel with hardened config and hardening patches with the bore scheduler
-_cpusched=${_cpusched='tt'}
+_cpusched=${_cpusched-'tt'}
### BUILD OPTIONS
# Set these variables to ANYTHING that is not null to enable them
### Tweak kernel options prior to a build via nconfig
-_makenconfig=${_makenconfig=}
+_makenconfig=${_makenconfig-}
### Tweak kernel options prior to a build via menuconfig
-_makemenuconfig=${_makemenuconfig=}
+_makemenuconfig=${_makemenuconfig-}
### Tweak kernel options prior to a build via xconfig
-_makexconfig=${_makexconfig=}
+_makexconfig=${_makexconfig-}
### Tweak kernel options prior to a build via gconfig
-_makegconfig=${_makegconfig=}
+_makegconfig=${_makegconfig-}
# NUMA is optimized for multi-socket motherboards.
# A single multi-core CPU actually runs slower with NUMA enabled.
# See, https://bugs.archlinux.org/task/31187
-_NUMAdisable=${_NUMAdisable=y}
+_NUMAdisable=${_NUMAdisable-y}
# Compile ONLY used modules to VASTLYreduce the number of modules built
# and the build time.
@@ -49,62 +49,62 @@ _NUMAdisable=${_NUMAdisable=y}
# This PKGBUILD read the database kept if it exists
#
# More at this wiki page ---> https://wiki.archlinux.org/index.php/Modprobed-db
-_localmodcfg=${_localmodcfg=}
+_localmodcfg=${_localmodcfg-}
# Use the current kernel's .config file
# Enabling this option will use the .config of the RUNNING kernel rather than
# the ARCH defaults. Useful when the package gets updated and you already went
# through the trouble of customizing your config options. NOT recommended when
# a new kernel is released, but again, convenient for package bumps.
-_use_current=${_use_current=}
+_use_current=${_use_current-}
### Enable KBUILD_CFLAGS -O3
-_cc_harder=${_cc_harder=y}
+_cc_harder=${_cc_harder-y}
### Set this to your number of threads you have in your machine otherwise it will default to 128
-_nr_cpus=${_nr_cpus=}
+_nr_cpus=${_nr_cpus-}
### Set performance governor as default
-_per_gov=${_per_gov=y}
+_per_gov=${_per_gov-y}
### Enable TCP_CONG_BBR2
_tcp_bbr2=${_tcp_bbr2=y}
### Running with a 1000HZ, 750Hz, 600 Hz, 500Hz, 300Hz, 250Hz and 100Hz tick rate
-_HZ_ticks=${_HZ_ticks=750}
+_HZ_ticks=${_HZ_ticks-750}
## Choose between perodic, idle or full
### Full tickless can give higher performances in various cases but, depending on hardware, lower consistency.
-_tickrate=${_tickrate=full}
+_tickrate=${_tickrate-full}
## Choose between full(low-latency), voluntary or server
-_preempt=${_preempt=full}
+_preempt=${_preempt-full}
### Disable MQ-Deadline I/O scheduler
-_mq_deadline_disable=${_mq_deadline_disable=y}
+_mq_deadline_disable=${_mq_deadline_disable-y}
### Disable Kyber I/O scheduler
-_kyber_disable=${_kyber_disable=y}
+_kyber_disable=${_kyber_disable-y}
### Enable multigenerational LRU
# ATTENTION - one of three predefined values should be selected!
# 'standard' - enable multigenerational LRU
# 'stats' - enable multigenerational LRU with stats
# 'none' - disable multigenerational LRU
-_lru_config=${_lru_config='standard'}
+_lru_config=${_lru_config-'standard'}
### Enable per-VMA locking
# ATTENTION - one of three predefined values should be selected!
# 'standard' - enable per-VMA locking
# 'stats' - enable per-VMA locking with stats
# 'none' - disable per-VMA locking
-_vma_config=${_vma_config='standard'}
+_vma_config=${_vma_config-'standard'}
## Enable DAMON
-_damon=${_damon=}
+_damon=${_damon-}
## Enable Linux Random Number Generator
-_lrng_enable=${_lrng_enable=y}
+_lrng_enable=${_lrng_enable-y}
# CPU compiler optimizations - Defaults to prompt at kernel config if left empty
# AMD CPUs : "k8" "k8sse3" "k10" "barcelona" "bobcat" "jaguar" "bulldozer" "piledriver" "steamroller" "excavator" "zen" "zen2" "zen3"
@@ -115,15 +115,15 @@ _lrng_enable=${_lrng_enable=y}
# - "generic" (kernel's default - to share the package between machines with different CPU µarch as long as they are x86-64)
#
# Or use the _use_auto_optimization with _use_auto_optimization=y
-_processor_opt=${_processor_opt=}
+_processor_opt=${_processor_opt-}
-_use_auto_optimization=${_use_auto_optimization=y}
+_use_auto_optimization=${_use_auto_optimization-y}
# disable debug to lower the size of the kernel
-_disable_debug=${_disable_debug=y}
+_disable_debug=${_disable_debug-y}
## Enable zram/zswap ZSTD compression
-_zstd_compression=${_zstd_compression=y}
+_zstd_compression=${_zstd_compression-y}
### Selecting the ZSTD kernel and modules compression level
# ATTENTION - one of two predefined values should be selected!
@@ -131,12 +131,12 @@ _zstd_compression=${_zstd_compression=y}
# 'normal' - standard compression ratio
# WARNING: the ultra settings can sometimes
# be counterproductive in both size and speed.
-_zstd_level_value=${_zstd_level_value='normal'}
+_zstd_level_value=${_zstd_level_value-'normal'}
# Clang LTO mode, only available with the "llvm" compiler - options are "no", "full" or "thin".
# "full: uses 1 thread for Linking, slow and uses more memory, theoretically with the highest performance gains."
# "thin: uses multiple threads, faster and uses less memory, may have a lower runtime performance than Full."
-_use_llvm_lto=${_use_llvm_lto=}
+_use_llvm_lto=${_use_llvm_lto-}
# KCFI is a proposed forward-edge control-flow integrity scheme for
# Clang, which is more suitable for kernel use than the existing CFI
@@ -147,13 +147,13 @@ _use_llvm_lto=${_use_llvm_lto=}
# you can find a patched llvm-git in the cachyos-repo's.
# The packagename is called "llvm-kcfi"
# ATTENTION!: This is very experimental and could fail and the compilation or have other bugs in the kernel
-_use_kcfi=${_use_kcfi=}
+_use_kcfi=${_use_kcfi-}
# Build the zfs module builtin in to the kernel
-_build_zfs=${_build_zfs=}
+_build_zfs=${_build_zfs-}
# Enable bcachefs
-_bcachefs=${_bcachefs=}
+_bcachefs=${_bcachefs-}
# Enable NEST
# NEST is a experimental cfs scheduler you can find more about here:
@@ -163,7 +163,7 @@ _bcachefs=${_bcachefs=}
# taskset -c $THREADS application
# example: taskset -c 0-23 application
# ATTENTION!:Just works together with the BORE Scheduler and CFS Scheduler
-_nest=${_nest=}
+_nest=${_nest-}
# Enable LATENCY NICE
# Latency nice is a approach to sets latency-nice as a per-task attribute
@@ -174,7 +174,7 @@ _nest=${_nest=}
# You need to configure ananicy-cpp for this or use existing settings
# If you want to test it, use the following branch
# https://gitlab.com/ananicy-cpp/ananicy-cpp/-/tree/feature/latency-nice
-_latency_nice=${_latency_nice=}
+_latency_nice=${_latency_nice-}
if [ -n "$_use_llvm_lto" ]; then
pkgsuffix=${_cpusched}-lto