Archlinux Kernel based on different schedulers and some other performance improvements.
Shell archlinuxbaby-schedcachycachy-schedulercachyoscacule-schedkernellinux-kernelperformanceperformance-tuning
5.17.4-2
Peter Jungde7d8ef5a534
diff --git a/linux-bore/.SRCINFO b/linux-bore/.SRCINFOindex 45c092b5..c3cbdf6b 100755--- a/linux-bore/.SRCINFO+++ b/linux-bore/.SRCINFO@@ -1,7 +1,7 @@pkgbase = linux-borepkgdesc = Linux BORE scheduler Kernel by CachyOS with other patches and improvementspkgver = 5.17.4- pkgrel = 1+ pkgrel = 2url = https://github.com/CachyOS/linux-cachyosarch = x86_64arch = x86_64_v3diff --git a/linux-bore/PKGBUILD b/linux-bore/PKGBUILDindex a1f46c1c..06e3a8bf 100644--- a/linux-bore/PKGBUILD+++ b/linux-bore/PKGBUILD@@ -52,12 +52,16 @@ _per_gov=y### Enable TCP_CONG_BBR2_tcp_bbr2=y-### Running with a 1000HZ, 750Hz or 500HZ tick rate+### Running with a 1000HZ, 750Hz, 600 Hz or 500Hz tick rate_1k_HZ_ticks=_750_HZ_ticks=y_600_HZ_ticks=_500_HZ_ticks=+##ä Choose between perodic, tickless idle or full tickless+### Full tickless can give higher performances in various cases but, depending on hardware, lower consistency. Just tickless idle can perform better on some platforms (mostly AMD based).+_tickrate=full+### Disable MQ-Deadline I/O scheduler_mq_deadline_disable=y@@ -71,6 +75,7 @@ _lru_enable=y_damon=y_spf_enable=y+### Enable Linux Random Number Generator_lrng_enable=y@@ -104,16 +109,18 @@ _zstd_compression=y_nf_cone=y-## Enable it for compiling with LLVM and THINLTO+# Clang LTO mode, only available with the "llvm" compiler - options are "no", "full" or "thin".+# "full: uses 1 thread for Linking, slow and uses more memory, theoretically with the highest performance gains."+# "thin: uses multiple threads, faster and uses less memory, may have a lower runtime performance than Full."_use_llvm_lto=# Enable it for using the LLVM CFI PATCH for a better security_use_cfi=if [ -n "$_use_llvm_lto" ]; then- pkgbase=linux-bore-lto+ pkgbase=linux-${_cpusched}-ltoelse- pkgbase=linux-bore+ pkgbase=linux-${_cpusched}fi_major=5.17_minor=4@@ -127,7 +134,7 @@ _srcname=linux-${_stable}#_srcname=linux-${_major}arch=(x86_64 x86_64_v3)pkgdesc='Linux BORE scheduler Kernel by CachyOS with other patches and improvements'-pkgrel=1+pkgrel=2arch=('x86_64' 'x86_64_v3')url="https://github.com/CachyOS/linux-cachyos"license=('GPL2')@@ -140,10 +147,26 @@ _patchsource="https://raw.githubusercontent.com/ptr1337/kernel-patches/master/${source=("https://cdn.kernel.org/pub/linux/kernel/v${pkgver%%.*}.x/${_srcname}.tar.xz""config"- # "${_patchsource}/sched/0001-prjc.patch"- # "${_patchsource}/sched/0001-cacULE.patch"- "${_patchsource}/sched/0001-bore-sched.patch"- # "${_patchsource}/sched/0001-tt.patch"+)+if [ "$_cpusched" = "bmq" ]; then+ source+=("${_patchsource}/sched/0001-prjc.patch")+fi+if [ "$_cpusched" = "pds" ]; then+ source+=("${_patchsource}/sched/0001-prjc.patch")+fi+if [ "$_cpusched" = "cacule" ]; then+ source+=("${_patchsource}/sched/0001-cacULE.patch")+fi+if [ "$_cpusched" = "cacule-rdb" ]; then+ source+=("${_patchsource}/sched/0001-cacULE.patch")+fi+if [ "$_cpusched" = "tt" ]; then+ source+=("${_patchsource}/sched/0001-tt.patch")+fi+if [ "$_cpusched" = "bore" ]; then+ source+=("${_patchsource}/sched/0001-bore-sched.patch")+fi+source+=("${_patchsource}/0001-arch.patch""${_patchsource}/0002-anbox.patch""${_patchsource}/0003-bbr2.patch"@@ -160,7 +183,6 @@ source=("${_patchsource}/0014-lrng.patch""${_patchsource}/0015-le9.patch""${_patchsource}/0016-ck-hrtimer.patch"- # "${_patchsource}/0017-FG-KASLR.patch""auto-cpu-optimization.sh")@@ -252,7 +274,9 @@ prepare() {scripts/config --enable CONFIG_CFI_CLANGfi- if [ -n "$_use_llvm_lto" ]; then+ ### Selecting the THIN or FULL-LTO compression level+ if [ "$_use_llvm_lto" = "thin" ]; then+ echo "Enabling highest ZSTD compression ratio..."scripts/config --disable LTO_NONE \--enable LTO \--enable LTO_CLANG \@@ -261,6 +285,18 @@ prepare() {--enable HAS_LTO_CLANG \--enable LTO_CLANG_THIN \--enable HAVE_GCC_PLUGINS+ elif [ "$_use_llvm_lto" = "full" ]; then+ echo "Enabling standard ZSTD compression ratio..."+ scripts/config --disable LTO_NONE \+ --enable LTO \+ --enable LTO_CLANG \+ --enable ARCH_SUPPORTS_LTO_CLANG \+ --enable ARCH_SUPPORTS_LTO_CLANG_THIN \+ --enable HAS_LTO_CLANG \+ --enable LTO_CLANG \+ --enable HAVE_GCC_PLUGINS+ else+ scripts/config --enable CONFIG_LTO_NONEfi### Optionally set tickrate to 1000@@ -330,11 +366,6 @@ prepare() {echo "Setting performance governor..."scripts/config --disable CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTILscripts/config --enable CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE- echo "Disabling uneeded governors..."- scripts/config --disable CONFIG_CPU_FREQ_GOV_ONDEMAND- scripts/config --disable CONFIG_CPU_FREQ_GOV_CONSERVATIVE- scripts/config --disable CONFIG_CPU_FREQ_GOV_USERSPACE- scripts/config --disable CONFIG_CPU_FREQ_GOV_SCHEDUTILecho "Set PCIEASPM DRIVER to performance..."scripts/config --enable CONFIG_PCIEASPMscripts/config --enable CONFIG_PCIEASPM_PERFORMANCE@@ -342,6 +373,33 @@ prepare() {scripts/config --enable CONFIG_PCIE_BUS_PERFORMANCEfi+ ### Selecting between tickless idle, perodic tics or full tickless+ if [ "$_tickrate" = "perodic" ]; then+ echo "Enabling periodic ticks..."+ scripts/config --disable CONFIG_NO_HZ_IDLE+ scripts/config --disable CONFIG_NO_HZ_FULL+ scripts/config --disable CONFIG_NO_HZ+ scripts/config --disable CONFIG_NO_HZ_COMMON+ scripts/config --enable CONFIG_HZ_PERIODIC+ elif [ "$_tickrate" = "idle" ]; then+ echo "Enabling tickless idle..."+ scripts/config --disable CONFIG_HZ_PERIODIC+ scripts/config --disable CONFIG_NO_HZ_FULL+ scripts/config --enable CONFIG_NO_HZ_IDLE+ scripts/config --enable CONFIG_NO_HZ+ scripts/config --enable CONFIG_NO_HZ_COMMON+ elif [ "$_tickrate" = "full" ]; then+ echo "Enabling tickless idle..."+ scripts/config --disable CONFIG_HZ_PERIODIC+ scripts/config --disable CONFIG_NO_HZ_IDLE+ scripts/config --disable CONFIG_CONTEXT_TRACKING_FORCE+ scripts/config --enable CONFIG_NO_HZ_FULL_NODEF+ scripts/config --enable CONFIG_NO_HZ_FULL+ scripts/config --enable CONFIG_NO_HZ+ scripts/config --enable CONFIG_NO_HZ_COMMON+ scripts/config --enable CONFIG_CONTEXT_TRACKING+ fi+### Enable KBUILD_CFLAGS -O3if [ -n "$_cc_harder" ]; thenecho "Enabling KBUILD_CFLAGS -O3..."@@ -369,7 +427,7 @@ prepare() {### Enable SPFif [ -n "$_spf_enable" ]; then- echo "Enabling multigenerational LRU..."+ echo "Enabling SPECULATIVE_PAGE_FAULT LRU..."scripts/config --enable CONFIG_SPECULATIVE_PAGE_FAULTfi@@ -514,6 +572,9 @@ prepare() {scripts/config --disable CONFIG_SCHED_DEBUGscripts/config --disable CONFIG_KVM_WERROR+ echo "Enable CONFIG_USER_NS_UNPRIVILEGED"+ scripts/config --enable CONFIG_USER_NS+### Optionally use running kernel's config# code originally by nous; http://aur.archlinux.org/packages.php?ID=40191if [ -n "$_use_current" ]; thendiff --git a/linux-cachyos-bmq/.SRCINFO b/linux-cachyos-bmq/.SRCINFOindex fe2b5cbe..cb7332b4 100755--- a/linux-cachyos-bmq/.SRCINFO+++ b/linux-cachyos-bmq/.SRCINFO@@ -1,7 +1,7 @@pkgbase = linux-cachyos-bmqpkgdesc = Linux BMQ scheduler Kernel by CachyOS with other patches and improvementspkgver = 5.17.4- pkgrel = 1+ pkgrel = 2url = https://github.com/CachyOS/linux-cachyosarch = x86_64arch = x86_64_v3@@ -45,7 +45,7 @@ pkgbase = linux-cachyos-bmqsource = auto-cpu-optimization.shsha256sums = 6e3cd56ee83a9cb5ac3fde1442c40367ab67368946c4c93bbeb1c65664a0d3c5sha256sums = 29c5dd2ae6b452b75b25816a8f6610fa2ff54f21b22a0ccef5c2e98a7077eb36- sha256sums = 25ff374e8fe339dc28042cb38defe245c71aae9689dfaf3e5cc84a546150e45b+ sha256sums = a1f1dba089c7e66f549e5343462fd87c033c28dc53788417061dc71114b26c5bsha256sums = e2109061823fe11e99eb5002b3d553ef9629c8495b974af36fc4113889dd0080sha256sums = efd954e75525fb169c3e7d5f4a8b673f8a59469c9c5f8843c9255efbda48e6a9sha256sums = 80d4a1e4c7f3cbed102de9079859b34a942d4e6424bf86c34a6b00d90f51fdb3diff --git a/linux-cachyos-bmq/PKGBUILD b/linux-cachyos-bmq/PKGBUILDindex a4790c25..71780361 100644--- a/linux-cachyos-bmq/PKGBUILD+++ b/linux-cachyos-bmq/PKGBUILD@@ -52,21 +52,22 @@ _per_gov=y### Enable TCP_CONG_BBR2_tcp_bbr2=y-### Running with a 1000HZ, 750Hz or 500HZ tick rate+### Running with a 1000HZ, 750Hz, 600 Hz or 500Hz tick rate_1k_HZ_ticks=_750_HZ_ticks=y_600_HZ_ticks=_500_HZ_ticks=+##ä Choose between perodic, tickless idle or full tickless+### Full tickless can give higher performances in various cases but, depending on hardware, lower consistency. Just tickless idle can perform better on some platforms (mostly AMD based).+_tickrate=full+### Disable MQ-Deadline I/O scheduler_mq_deadline_disable=y### Disable Kyber I/O scheduler_kyber_disable=y-### Enable protect file mappings under memory pressure-_mm_protect=-### Enable multigenerational LRU_lru_enable=y@@ -108,20 +109,18 @@ _zstd_compression=y_nf_cone=y-## Enable it for compiling with LLVM and THINLTO+# Clang LTO mode, only available with the "llvm" compiler - options are "no", "full" or "thin".+# "full: uses 1 thread for Linking, slow and uses more memory, theoretically with the highest performance gains."+# "thin: uses multiple threads, faster and uses less memory, may have a lower runtime performance than Full."_use_llvm_lto=# Enable it for using the LLVM CFI PATCH for a better security_use_cfi=-## Enable PGO (patch is failing when cfi is also used)-#_use_pgo=--if [ -n "$_use_llvm_lto" ]; then- pkgbase=linux-cachyos-bmq-lto+ pkgbase=linux-cachyos-${_cpusched}-ltoelse- pkgbase=linux-cachyos-bmq+ pkgbase=linux-cachyos-${_cpusched}fi_major=5.17_minor=4@@ -135,7 +134,7 @@ _srcname=linux-${_stable}#_srcname=linux-${_major}arch=(x86_64 x86_64_v3)pkgdesc='Linux BMQ scheduler Kernel by CachyOS with other patches and improvements'-pkgrel=1+pkgrel=2arch=('x86_64' 'x86_64_v3')url="https://github.com/CachyOS/linux-cachyos"license=('GPL2')@@ -148,10 +147,26 @@ _patchsource="https://raw.githubusercontent.com/ptr1337/kernel-patches/master/${source=("https://cdn.kernel.org/pub/linux/kernel/v${pkgver%%.*}.x/${_srcname}.tar.xz""config"- "${_patchsource}/sched/0001-prjc.patch"- # "${_patchsource}/sched/0001-cacULE.patch"- # "${_patchsource}/sched/0001-bore-sched.patch"- # "${_patchsource}/sched/0001-tt.patch"+)+if [ "$_cpusched" = "bmq" ]; then+ source+=("${_patchsource}/sched/0001-prjc.patch")+fi+if [ "$_cpusched" = "pds" ]; then+ source+=("${_patchsource}/sched/0001-prjc.patch")+fi+if [ "$_cpusched" = "cacule" ]; then+ source+=("${_patchsource}/sched/0001-cacULE.patch")+fi+if [ "$_cpusched" = "cacule-rdb" ]; then+ source+=("${_patchsource}/sched/0001-cacULE.patch")+fi+if [ "$_cpusched" = "tt" ]; then+ source+=("${_patchsource}/sched/0001-tt.patch")+fi+if [ "$_cpusched" = "bore" ]; then+ source+=("${_patchsource}/sched/0001-bore-sched.patch")+fi+source+=("${_patchsource}/0001-arch.patch""${_patchsource}/0002-anbox.patch""${_patchsource}/0003-bbr2.patch"@@ -167,7 +182,6 @@ source=("${_patchsource}/0013-xanmod.patch""${_patchsource}/0014-lrng.patch""${_patchsource}/0015-le9.patch"- # "${_patchsource}/0017-FG-KASLR.patch""auto-cpu-optimization.sh")@@ -259,7 +273,9 @@ prepare() {scripts/config --enable CONFIG_CFI_CLANGfi- if [ -n "$_use_llvm_lto" ]; then+ ### Selecting the THIN or FULL-LTO compression level+ if [ "$_use_llvm_lto" = "thin" ]; then+ echo "Enabling highest ZSTD compression ratio..."scripts/config --disable LTO_NONE \--enable LTO \--enable LTO_CLANG \@@ -268,6 +284,18 @@ prepare() {--enable HAS_LTO_CLANG \--enable LTO_CLANG_THIN \--enable HAVE_GCC_PLUGINS+ elif [ "$_use_llvm_lto" = "full" ]; then+ echo "Enabling standard ZSTD compression ratio..."+ scripts/config --disable LTO_NONE \+ --enable LTO \+ --enable LTO_CLANG \+ --enable ARCH_SUPPORTS_LTO_CLANG \+ --enable ARCH_SUPPORTS_LTO_CLANG_THIN \+ --enable HAS_LTO_CLANG \+ --enable LTO_CLANG \+ --enable HAVE_GCC_PLUGINS+ else+ scripts/config --enable CONFIG_LTO_NONEfi### Optionally set tickrate to 1000@@ -337,11 +365,6 @@ prepare() {echo "Setting performance governor..."scripts/config --disable CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTILscripts/config --enable CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE- echo "Disabling uneeded governors..."- scripts/config --disable CONFIG_CPU_FREQ_GOV_ONDEMAND- scripts/config --disable CONFIG_CPU_FREQ_GOV_CONSERVATIVE- scripts/config --disable CONFIG_CPU_FREQ_GOV_USERSPACE- scripts/config --disable CONFIG_CPU_FREQ_GOV_SCHEDUTILecho "Set PCIEASPM DRIVER to performance..."scripts/config --enable CONFIG_PCIEASPMscripts/config --enable CONFIG_PCIEASPM_PERFORMANCE@@ -349,6 +372,33 @@ prepare() {scripts/config --enable CONFIG_PCIE_BUS_PERFORMANCEfi+ ### Selecting between tickless idle, perodic tics or full tickless+ if [ "$_tickrate" = "perodic" ]; then+ echo "Enabling periodic ticks..."+ scripts/config --disable CONFIG_NO_HZ_IDLE+ scripts/config --disable CONFIG_NO_HZ_FULL+ scripts/config --disable CONFIG_NO_HZ+ scripts/config --disable CONFIG_NO_HZ_COMMON+ scripts/config --enable CONFIG_HZ_PERIODIC+ elif [ "$_tickrate" = "idle" ]; then+ echo "Enabling tickless idle..."+ scripts/config --disable CONFIG_HZ_PERIODIC+ scripts/config --disable CONFIG_NO_HZ_FULL+ scripts/config --enable CONFIG_NO_HZ_IDLE+ scripts/config --enable CONFIG_NO_HZ+ scripts/config --enable CONFIG_NO_HZ_COMMON+ elif [ "$_tickrate" = "full" ]; then+ echo "Enabling tickless idle..."+ scripts/config --disable CONFIG_HZ_PERIODIC+ scripts/config --disable CONFIG_NO_HZ_IDLE+ scripts/config --disable CONFIG_CONTEXT_TRACKING_FORCE+ scripts/config --enable CONFIG_NO_HZ_FULL_NODEF+ scripts/config --enable CONFIG_NO_HZ_FULL+ scripts/config --enable CONFIG_NO_HZ+ scripts/config --enable CONFIG_NO_HZ_COMMON+ scripts/config --enable CONFIG_CONTEXT_TRACKING+ fi+### Enable KBUILD_CFLAGS -O3if [ -n "$_cc_harder" ]; thenecho "Enabling KBUILD_CFLAGS -O3..."@@ -376,7 +426,7 @@ prepare() {### Enable SPFif [ -n "$_spf_enable" ]; then- echo "Enabling multigenerational LRU..."+ echo "Enabling SPECULATIVE_PAGE_FAULT LRU..."scripts/config --enable CONFIG_SPECULATIVE_PAGE_FAULTfi@@ -521,6 +571,9 @@ prepare() {scripts/config --disable CONFIG_SCHED_DEBUGscripts/config --disable CONFIG_KVM_WERROR+ echo "Enable CONFIG_USER_NS_UNPRIVILEGED"+ scripts/config --enable CONFIG_USER_NS+### Optionally use running kernel's config# code originally by nous; http://aur.archlinux.org/packages.php?ID=40191if [ -n "$_use_current" ]; then@@ -692,7 +745,7 @@ donesha256sums=('6e3cd56ee83a9cb5ac3fde1442c40367ab67368946c4c93bbeb1c65664a0d3c5''29c5dd2ae6b452b75b25816a8f6610fa2ff54f21b22a0ccef5c2e98a7077eb36'- '25ff374e8fe339dc28042cb38defe245c71aae9689dfaf3e5cc84a546150e45b'+ 'a1f1dba089c7e66f549e5343462fd87c033c28dc53788417061dc71114b26c5b''e2109061823fe11e99eb5002b3d553ef9629c8495b974af36fc4113889dd0080''efd954e75525fb169c3e7d5f4a8b673f8a59469c9c5f8843c9255efbda48e6a9''80d4a1e4c7f3cbed102de9079859b34a942d4e6424bf86c34a6b00d90f51fdb3'diff --git a/linux-cachyos-bore/.SRCINFO b/linux-cachyos-bore/.SRCINFOindex 39ab5cde..42f153fb 100755--- a/linux-cachyos-bore/.SRCINFO+++ b/linux-cachyos-bore/.SRCINFO@@ -1,7 +1,7 @@pkgbase = linux-cachyos-borepkgdesc = Linux BORE scheduler Kernel by CachyOS with other patches and improvementspkgver = 5.17.4- pkgrel = 1+ pkgrel = 2url = https://github.com/CachyOS/linux-cachyosarch = x86_64arch = x86_64_v3@@ -26,6 +26,7 @@ pkgbase = linux-cachyos-boreoptions = !stripsource = https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.17.4.tar.xzsource = config+ source = https://raw.githubusercontent.com/ptr1337/kernel-patches/master/5.17/sched/0001-bore-sched.patchsource = https://raw.githubusercontent.com/ptr1337/kernel-patches/master/5.17/0001-arch.patchsource = https://raw.githubusercontent.com/ptr1337/kernel-patches/master/5.17/0002-anbox.patchsource = https://raw.githubusercontent.com/ptr1337/kernel-patches/master/5.17/0003-bbr2.patch@@ -45,6 +46,7 @@ pkgbase = linux-cachyos-boresource = auto-cpu-optimization.shsha256sums = 6e3cd56ee83a9cb5ac3fde1442c40367ab67368946c4c93bbeb1c65664a0d3c5sha256sums = 29c5dd2ae6b452b75b25816a8f6610fa2ff54f21b22a0ccef5c2e98a7077eb36+ sha256sums = 0f99f7935f545033eff35b5e4ffa54142c31c7034ee801cd1534fe085351f019sha256sums = e2109061823fe11e99eb5002b3d553ef9629c8495b974af36fc4113889dd0080sha256sums = efd954e75525fb169c3e7d5f4a8b673f8a59469c9c5f8843c9255efbda48e6a9sha256sums = 80d4a1e4c7f3cbed102de9079859b34a942d4e6424bf86c34a6b00d90f51fdb3diff --git a/linux-cachyos-bore/PKGBUILD b/linux-cachyos-bore/PKGBUILDindex 039b8739..28733f96 100644--- a/linux-cachyos-bore/PKGBUILD+++ b/linux-cachyos-bore/PKGBUILD@@ -52,21 +52,22 @@ _per_gov=y### Enable TCP_CONG_BBR2_tcp_bbr2=y-### Running with a 1000HZ, 750Hz or 500HZ tick rate+### Running with a 1000HZ, 750Hz, 600 Hz or 500Hz tick rate_1k_HZ_ticks=_750_HZ_ticks=y_600_HZ_ticks=_500_HZ_ticks=+##ä Choose between perodic, tickless idle or full tickless+### Full tickless can give higher performances in various cases but, depending on hardware, lower consistency. Just tickless idle can perform better on some platforms (mostly AMD based).+_tickrate=full+### Disable MQ-Deadline I/O scheduler_mq_deadline_disable=y### Disable Kyber I/O scheduler_kyber_disable=y-### Enable protect file mappings under memory pressure-_mm_protect=-### Enable multigenerational LRU_lru_enable=y@@ -108,17 +109,18 @@ _zstd_compression=y_nf_cone=y-## Enable it for compiling with LLVM and THINLTO+# Clang LTO mode, only available with the "llvm" compiler - options are "no", "full" or "thin".+# "full: uses 1 thread for Linking, slow and uses more memory, theoretically with the highest performance gains."+# "thin: uses multiple threads, faster and uses less memory, may have a lower runtime performance than Full."_use_llvm_lto=# Enable it for using the LLVM CFI PATCH for a better security_use_cfi=-if [ -n "$_use_llvm_lto" ]; then- pkgbase=linux-cachyos-bore-lto+ pkgbase=linux-cachyos-${_cpusched}-ltoelse- pkgbase=linux-cachyos-bore+ pkgbase=linux-cachyos-${_cpusched}fi_major=5.17_minor=4@@ -132,7 +134,7 @@ _srcname=linux-${_stable}#_srcname=linux-${_major}arch=(x86_64 x86_64_v3)pkgdesc='Linux BORE scheduler Kernel by CachyOS with other patches and improvements'-pkgrel=1+pkgrel=2arch=('x86_64' 'x86_64_v3')url="https://github.com/CachyOS/linux-cachyos"license=('GPL2')@@ -145,10 +147,26 @@ _patchsource="https://raw.githubusercontent.com/ptr1337/kernel-patches/master/${source=("https://cdn.kernel.org/pub/linux/kernel/v${pkgver%%.*}.x/${_srcname}.tar.xz""config"- # "${_patchsource}/sched/0001-prjc.patch"- # "${_patchsource}/sched/0001-cacULE.patch"- # "${_patchsource}/sched/0001-bore-sched.patch"- # "${_patchsource}/sched/0001-tt.patch"+)+if [ "$_cpusched" = "bmq" ]; then+ source+=("${_patchsource}/sched/0001-prjc.patch")+fi+if [ "$_cpusched" = "pds" ]; then+ source+=("${_patchsource}/sched/0001-prjc.patch")+fi+if [ "$_cpusched" = "cacule" ]; then+ source+=("${_patchsource}/sched/0001-cacULE.patch")+fi+if [ "$_cpusched" = "cacule-rdb" ]; then+ source+=("${_patchsource}/sched/0001-cacULE.patch")+fi+if [ "$_cpusched" = "tt" ]; then+ source+=("${_patchsource}/sched/0001-tt.patch")+fi+if [ "$_cpusched" = "bore" ]; then+ source+=("${_patchsource}/sched/0001-bore-sched.patch")+fi+source+=("${_patchsource}/0001-arch.patch""${_patchsource}/0002-anbox.patch""${_patchsource}/0003-bbr2.patch"@@ -165,7 +183,6 @@ source=("${_patchsource}/0014-lrng.patch""${_patchsource}/0015-le9.patch""${_patchsource}/0016-ck-hrtimer.patch"- # "${_patchsource}/0017-FG-KASLR.patch""auto-cpu-optimization.sh")@@ -257,7 +274,9 @@ prepare() {scripts/config --enable CONFIG_CFI_CLANGfi- if [ -n "$_use_llvm_lto" ]; then+ ### Selecting the THIN or FULL-LTO compression level+ if [ "$_use_llvm_lto" = "thin" ]; then+ echo "Enabling highest ZSTD compression ratio..."scripts/config --disable LTO_NONE \--enable LTO \--enable LTO_CLANG \@@ -266,6 +285,18 @@ prepare() {--enable HAS_LTO_CLANG \--enable LTO_CLANG_THIN \--enable HAVE_GCC_PLUGINS+ elif [ "$_use_llvm_lto" = "full" ]; then+ echo "Enabling standard ZSTD compression ratio..."+ scripts/config --disable LTO_NONE \+ --enable LTO \+ --enable LTO_CLANG \+ --enable ARCH_SUPPORTS_LTO_CLANG \+ --enable ARCH_SUPPORTS_LTO_CLANG_THIN \+ --enable HAS_LTO_CLANG \+ --enable LTO_CLANG \+ --enable HAVE_GCC_PLUGINS+ else+ scripts/config --enable CONFIG_LTO_NONEfi### Optionally set tickrate to 1000@@ -335,11 +366,6 @@ prepare() {echo "Setting performance governor..."scripts/config --disable CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTILscripts/config --enable CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE- echo "Disabling uneeded governors..."- scripts/config --disable CONFIG_CPU_FREQ_GOV_ONDEMAND- scripts/config --disable CONFIG_CPU_FREQ_GOV_CONSERVATIVE- scripts/config --disable CONFIG_CPU_FREQ_GOV_USERSPACE- scripts/config --disable CONFIG_CPU_FREQ_GOV_SCHEDUTILecho "Set PCIEASPM DRIVER to performance..."scripts/config --enable CONFIG_PCIEASPMscripts/config --enable CONFIG_PCIEASPM_PERFORMANCE@@ -347,6 +373,33 @@ prepare() {scripts/config --enable CONFIG_PCIE_BUS_PERFORMANCEfi+ ### Selecting between tickless idle, perodic tics or full tickless+ if [ "$_tickrate" = "perodic" ]; then+ echo "Enabling periodic ticks..."+ scripts/config --disable CONFIG_NO_HZ_IDLE+ scripts/config --disable CONFIG_NO_HZ_FULL+ scripts/config --disable CONFIG_NO_HZ+ scripts/config --disable CONFIG_NO_HZ_COMMON+ scripts/config --enable CONFIG_HZ_PERIODIC+ elif [ "$_tickrate" = "idle" ]; then+ echo "Enabling tickless idle..."+ scripts/config --disable CONFIG_HZ_PERIODIC+ scripts/config --disable CONFIG_NO_HZ_FULL+ scripts/config --enable CONFIG_NO_HZ_IDLE+ scripts/config --enable CONFIG_NO_HZ+ scripts/config --enable CONFIG_NO_HZ_COMMON+ elif [ "$_tickrate" = "full" ]; then+ echo "Enabling tickless idle..."+ scripts/config --disable CONFIG_HZ_PERIODIC+ scripts/config --disable CONFIG_NO_HZ_IDLE+ scripts/config --disable CONFIG_CONTEXT_TRACKING_FORCE+ scripts/config --enable CONFIG_NO_HZ_FULL_NODEF+ scripts/config --enable CONFIG_NO_HZ_FULL+ scripts/config --enable CONFIG_NO_HZ+ scripts/config --enable CONFIG_NO_HZ_COMMON+ scripts/config --enable CONFIG_CONTEXT_TRACKING+ fi+### Enable KBUILD_CFLAGS -O3if [ -n "$_cc_harder" ]; thenecho "Enabling KBUILD_CFLAGS -O3..."@@ -374,7 +427,7 @@ prepare() {### Enable SPFif [ -n "$_spf_enable" ]; then- echo "Enabling multigenerational LRU..."+ echo "Enabling SPECULATIVE_PAGE_FAULT LRU..."scripts/config --enable CONFIG_SPECULATIVE_PAGE_FAULTfi@@ -519,6 +572,9 @@ prepare() {scripts/config --disable CONFIG_SCHED_DEBUGscripts/config --disable CONFIG_KVM_WERROR+ echo "Enable CONFIG_USER_NS_UNPRIVILEGED"+ scripts/config --enable CONFIG_USER_NS+### Optionally use running kernel's config# code originally by nous; http://aur.archlinux.org/packages.php?ID=40191if [ -n "$_use_current" ]; then@@ -690,6 +746,7 @@ donesha256sums=('6e3cd56ee83a9cb5ac3fde1442c40367ab67368946c4c93bbeb1c65664a0d3c5''29c5dd2ae6b452b75b25816a8f6610fa2ff54f21b22a0ccef5c2e98a7077eb36'+ '0f99f7935f545033eff35b5e4ffa54142c31c7034ee801cd1534fe085351f019''e2109061823fe11e99eb5002b3d553ef9629c8495b974af36fc4113889dd0080''efd954e75525fb169c3e7d5f4a8b673f8a59469c9c5f8843c9255efbda48e6a9''80d4a1e4c7f3cbed102de9079859b34a942d4e6424bf86c34a6b00d90f51fdb3'diff --git a/linux-cachyos-cacule/.SRCINFO b/linux-cachyos-cacule/.SRCINFOindex 06f6231a..9c66b031 100755--- a/linux-cachyos-cacule/.SRCINFO+++ b/linux-cachyos-cacule/.SRCINFO@@ -1,7 +1,7 @@pkgbase = linux-cachyos-caculepkgdesc = Linux cacULE scheduler Kernel by CachyOS with other patches and improvementspkgver = 5.17.4- pkgrel = 1+ pkgrel = 2url = https://github.com/CachyOS/linux-cachyosarch = x86_64arch = x86_64_v3diff --git a/linux-cachyos-cacule/PKGBUILD b/linux-cachyos-cacule/PKGBUILDindex 083b84fd..64ba73a6 100644--- a/linux-cachyos-cacule/PKGBUILD+++ b/linux-cachyos-cacule/PKGBUILD@@ -52,12 +52,16 @@ _per_gov=y### Enable TCP_CONG_BBR2_tcp_bbr2=y-### Running with a 1000HZ, 750Hz or 500HZ tick rate+### Running with a 1000HZ, 750Hz, 600 Hz or 500Hz tick rate_1k_HZ_ticks=_750_HZ_ticks=y_600_HZ_ticks=_500_HZ_ticks=+##ä Choose between perodic, tickless idle or full tickless+### Full tickless can give higher performances in various cases but, depending on hardware, lower consistency. Just tickless idle can perform better on some platforms (mostly AMD based).+_tickrate=full+### Disable MQ-Deadline I/O scheduler_mq_deadline_disable=y@@ -70,7 +74,6 @@ _lru_enable=y### Enable DAMON_damon=y-_spf_enable=y### Enable Linux Random Number Generator@@ -106,17 +109,18 @@ _zstd_compression=y_nf_cone=y-## Enable it for compiling with LLVM and THINLTO+# Clang LTO mode, only available with the "llvm" compiler - options are "no", "full" or "thin".+# "full: uses 1 thread for Linking, slow and uses more memory, theoretically with the highest performance gains."+# "thin: uses multiple threads, faster and uses less memory, may have a lower runtime performance than Full."_use_llvm_lto=# Enable it for using the LLVM CFI PATCH for a better security_use_cfi=-if [ -n "$_use_llvm_lto" ]; then- pkgbase=linux-cachyos-cacule-lto+ pkgbase=linux-cachyos-${_cpusched}-ltoelse- pkgbase=linux-cachyos-cacule+ pkgbase=linux-cachyos-${_cpusched}fi_major=5.17_minor=4@@ -130,7 +134,7 @@ _srcname=linux-${_stable}#_srcname=linux-${_major}arch=(x86_64 x86_64_v3)pkgdesc='Linux cacULE scheduler Kernel by CachyOS with other patches and improvements'-pkgrel=1+pkgrel=2arch=('x86_64' 'x86_64_v3')url="https://github.com/CachyOS/linux-cachyos"license=('GPL2')@@ -143,10 +147,26 @@ _patchsource="https://raw.githubusercontent.com/ptr1337/kernel-patches/master/${source=("https://cdn.kernel.org/pub/linux/kernel/v${pkgver%%.*}.x/${_srcname}.tar.xz""config"- # "${_patchsource}/sched/0001-prjc.patch"- "${_patchsource}/sched/0001-cacULE.patch"- # "${_patchsource}/sched/0001-bore-sched.patch"- # "${_patchsource}/sched/0001-tt.patch"+)+if [ "$_cpusched" = "bmq" ]; then+ source+=("${_patchsource}/sched/0001-prjc.patch")+fi+if [ "$_cpusched" = "pds" ]; then+ source+=("${_patchsource}/sched/0001-prjc.patch")+fi+if [ "$_cpusched" = "cacule" ]; then+ source+=("${_patchsource}/sched/0001-cacULE.patch")+fi+if [ "$_cpusched" = "cacule-rdb" ]; then+ source+=("${_patchsource}/sched/0001-cacULE.patch")+fi+if [ "$_cpusched" = "tt" ]; then+ source+=("${_patchsource}/sched/0001-tt.patch")+fi+if [ "$_cpusched" = "bore" ]; then+ source+=("${_patchsource}/sched/0001-bore-sched.patch")+fi+source+=("${_patchsource}/0001-arch.patch""${_patchsource}/0002-anbox.patch""${_patchsource}/0003-bbr2.patch"@@ -163,7 +183,6 @@ source=("${_patchsource}/0014-lrng.patch""${_patchsource}/0015-le9.patch""${_patchsource}/0016-ck-hrtimer.patch"- # "${_patchsource}/0017-FG-KASLR.patch""auto-cpu-optimization.sh")@@ -255,7 +274,9 @@ prepare() {scripts/config --enable CONFIG_CFI_CLANGfi- if [ -n "$_use_llvm_lto" ]; then+ ### Selecting the THIN or FULL-LTO compression level+ if [ "$_use_llvm_lto" = "thin" ]; then+ echo "Enabling highest ZSTD compression ratio..."scripts/config --disable LTO_NONE \--enable LTO \--enable LTO_CLANG \@@ -264,6 +285,18 @@ prepare() {--enable HAS_LTO_CLANG \--enable LTO_CLANG_THIN \--enable HAVE_GCC_PLUGINS+ elif [ "$_use_llvm_lto" = "full" ]; then+ echo "Enabling standard ZSTD compression ratio..."+ scripts/config --disable LTO_NONE \+ --enable LTO \+ --enable LTO_CLANG \+ --enable ARCH_SUPPORTS_LTO_CLANG \+ --enable ARCH_SUPPORTS_LTO_CLANG_THIN \+ --enable HAS_LTO_CLANG \+ --enable LTO_CLANG \+ --enable HAVE_GCC_PLUGINS+ else+ scripts/config --enable CONFIG_LTO_NONEfi### Optionally set tickrate to 1000@@ -333,11 +366,6 @@ prepare() {echo "Setting performance governor..."scripts/config --disable CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTILscripts/config --enable CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE- echo "Disabling uneeded governors..."- scripts/config --disable CONFIG_CPU_FREQ_GOV_ONDEMAND- scripts/config --disable CONFIG_CPU_FREQ_GOV_CONSERVATIVE- scripts/config --disable CONFIG_CPU_FREQ_GOV_USERSPACE- scripts/config --disable CONFIG_CPU_FREQ_GOV_SCHEDUTILecho "Set PCIEASPM DRIVER to performance..."scripts/config --enable CONFIG_PCIEASPMscripts/config --enable CONFIG_PCIEASPM_PERFORMANCE@@ -345,6 +373,33 @@ prepare() {scripts/config --enable CONFIG_PCIE_BUS_PERFORMANCEfi+ ### Selecting between tickless idle, perodic tics or full tickless+ if [ "$_tickrate" = "perodic" ]; then+ echo "Enabling periodic ticks..."+ scripts/config --disable CONFIG_NO_HZ_IDLE+ scripts/config --disable CONFIG_NO_HZ_FULL+ scripts/config --disable CONFIG_NO_HZ+ scripts/config --disable CONFIG_NO_HZ_COMMON+ scripts/config --enable CONFIG_HZ_PERIODIC+ elif [ "$_tickrate" = "idle" ]; then+ echo "Enabling tickless idle..."+ scripts/config --disable CONFIG_HZ_PERIODIC+ scripts/config --disable CONFIG_NO_HZ_FULL+ scripts/config --enable CONFIG_NO_HZ_IDLE+ scripts/config --enable CONFIG_NO_HZ+ scripts/config --enable CONFIG_NO_HZ_COMMON+ elif [ "$_tickrate" = "full" ]; then+ echo "Enabling tickless idle..."+ scripts/config --disable CONFIG_HZ_PERIODIC+ scripts/config --disable CONFIG_NO_HZ_IDLE+ scripts/config --disable CONFIG_CONTEXT_TRACKING_FORCE+ scripts/config --enable CONFIG_NO_HZ_FULL_NODEF+ scripts/config --enable CONFIG_NO_HZ_FULL+ scripts/config --enable CONFIG_NO_HZ+ scripts/config --enable CONFIG_NO_HZ_COMMON+ scripts/config --enable CONFIG_CONTEXT_TRACKING+ fi+### Enable KBUILD_CFLAGS -O3if [ -n "$_cc_harder" ]; thenecho "Enabling KBUILD_CFLAGS -O3..."@@ -372,7 +427,7 @@ prepare() {### Enable SPFif [ -n "$_spf_enable" ]; then- echo "Enabling multigenerational LRU..."+ echo "Enabling SPECULATIVE_PAGE_FAULT LRU..."scripts/config --enable CONFIG_SPECULATIVE_PAGE_FAULTfi@@ -517,6 +572,9 @@ prepare() {scripts/config --disable CONFIG_SCHED_DEBUGscripts/config --disable CONFIG_KVM_WERROR+ echo "Enable CONFIG_USER_NS_UNPRIVILEGED"+ scripts/config --enable CONFIG_USER_NS+### Optionally use running kernel's config# code originally by nous; http://aur.archlinux.org/packages.php?ID=40191if [ -n "$_use_current" ]; thendiff --git a/linux-cachyos-pds/.SRCINFO b/linux-cachyos-pds/.SRCINFOindex 23198859..f98f6047 100755--- a/linux-cachyos-pds/.SRCINFO+++ b/linux-cachyos-pds/.SRCINFO@@ -1,7 +1,7 @@pkgbase = linux-cachyos-pdspkgdesc = Linux PDS scheduler Kernel by CachyOS with other patches and improvementspkgver = 5.17.4- pkgrel = 1+ pkgrel = 2url = https://github.com/CachyOS/linux-cachyosarch = x86_64arch = x86_64_v3@@ -45,7 +45,7 @@ pkgbase = linux-cachyos-pdssource = auto-cpu-optimization.shsha256sums = 6e3cd56ee83a9cb5ac3fde1442c40367ab67368946c4c93bbeb1c65664a0d3c5sha256sums = 29c5dd2ae6b452b75b25816a8f6610fa2ff54f21b22a0ccef5c2e98a7077eb36- sha256sums = 25ff374e8fe339dc28042cb38defe245c71aae9689dfaf3e5cc84a546150e45b+ sha256sums = a1f1dba089c7e66f549e5343462fd87c033c28dc53788417061dc71114b26c5bsha256sums = e2109061823fe11e99eb5002b3d553ef9629c8495b974af36fc4113889dd0080sha256sums = efd954e75525fb169c3e7d5f4a8b673f8a59469c9c5f8843c9255efbda48e6a9sha256sums = 80d4a1e4c7f3cbed102de9079859b34a942d4e6424bf86c34a6b00d90f51fdb3diff --git a/linux-cachyos-pds/PKGBUILD b/linux-cachyos-pds/PKGBUILDindex 8a448154..7f2a590c 100644--- a/linux-cachyos-pds/PKGBUILD+++ b/linux-cachyos-pds/PKGBUILD@@ -52,12 +52,16 @@ _per_gov=y### Enable TCP_CONG_BBR2_tcp_bbr2=y-### Running with a 1000HZ, 750Hz or 500HZ tick rate+### Running with a 1000HZ, 750Hz, 600 Hz or 500Hz tick rate_1k_HZ_ticks=_750_HZ_ticks=y_600_HZ_ticks=_500_HZ_ticks=+##ä Choose between perodic, tickless idle or full tickless+### Full tickless can give higher performances in various cases but, depending on hardware, lower consistency. Just tickless idle can perform better on some platforms (mostly AMD based).+_tickrate=full+### Disable MQ-Deadline I/O scheduler_mq_deadline_disable=y@@ -105,16 +109,18 @@ _zstd_compression=y_nf_cone=y-## Enable it for compiling with LLVM and THINLTO+# Clang LTO mode, only available with the "llvm" compiler - options are "no", "full" or "thin".+# "full: uses 1 thread for Linking, slow and uses more memory, theoretically with the highest performance gains."+# "thin: uses multiple threads, faster and uses less memory, may have a lower runtime performance than Full."_use_llvm_lto=# Enable it for using the LLVM CFI PATCH for a better security_use_cfi=if [ -n "$_use_llvm_lto" ]; then- pkgbase=linux-cachyos-pds-lto+ pkgbase=linux-cachyos-${_cpusched}-ltoelse- pkgbase=linux-cachyos-pds+ pkgbase=linux-cachyos-${_cpusched}fi_major=5.17_minor=4@@ -128,7 +134,7 @@ _srcname=linux-${_stable}#_srcname=linux-${_major}arch=(x86_64 x86_64_v3)pkgdesc='Linux PDS scheduler Kernel by CachyOS with other patches and improvements'-pkgrel=1+pkgrel=2arch=('x86_64' 'x86_64_v3')url="https://github.com/CachyOS/linux-cachyos"license=('GPL2')@@ -141,10 +147,26 @@ _patchsource="https://raw.githubusercontent.com/ptr1337/kernel-patches/master/${source=("https://cdn.kernel.org/pub/linux/kernel/v${pkgver%%.*}.x/${_srcname}.tar.xz""config"- "${_patchsource}/sched/0001-prjc.patch"- # "${_patchsource}/sched/0001-cacULE.patch"- # "${_patchsource}/sched/0001-bore-sched.patch"- # "${_patchsource}/sched/0001-tt.patch"+)+if [ "$_cpusched" = "bmq" ]; then+ source+=("${_patchsource}/sched/0001-prjc.patch")+fi+if [ "$_cpusched" = "pds" ]; then+ source+=("${_patchsource}/sched/0001-prjc.patch")+fi+if [ "$_cpusched" = "cacule" ]; then+ source+=("${_patchsource}/sched/0001-cacULE.patch")+fi+if [ "$_cpusched" = "cacule-rdb" ]; then+ source+=("${_patchsource}/sched/0001-cacULE.patch")+fi+if [ "$_cpusched" = "tt" ]; then+ source+=("${_patchsource}/sched/0001-tt.patch")+fi+if [ "$_cpusched" = "bore" ]; then+ source+=("${_patchsource}/sched/0001-bore-sched.patch")+fi+source+=("${_patchsource}/0001-arch.patch""${_patchsource}/0002-anbox.patch""${_patchsource}/0003-bbr2.patch"@@ -160,7 +182,6 @@ source=("${_patchsource}/0013-xanmod.patch""${_patchsource}/0014-lrng.patch""${_patchsource}/0015-le9.patch"- # "${_patchsource}/0017-FG-KASLR.patch""auto-cpu-optimization.sh")@@ -252,7 +273,9 @@ prepare() {scripts/config --enable CONFIG_CFI_CLANGfi- if [ -n "$_use_llvm_lto" ]; then+ ### Selecting the THIN or FULL-LTO compression level+ if [ "$_use_llvm_lto" = "thin" ]; then+ echo "Enabling highest ZSTD compression ratio..."scripts/config --disable LTO_NONE \--enable LTO \--enable LTO_CLANG \@@ -261,6 +284,18 @@ prepare() {--enable HAS_LTO_CLANG \--enable LTO_CLANG_THIN \--enable HAVE_GCC_PLUGINS+ elif [ "$_use_llvm_lto" = "full" ]; then+ echo "Enabling standard ZSTD compression ratio..."+ scripts/config --disable LTO_NONE \+ --enable LTO \+ --enable LTO_CLANG \+ --enable ARCH_SUPPORTS_LTO_CLANG \+ --enable ARCH_SUPPORTS_LTO_CLANG_THIN \+ --enable HAS_LTO_CLANG \+ --enable LTO_CLANG \+ --enable HAVE_GCC_PLUGINS+ else+ scripts/config --enable CONFIG_LTO_NONEfi### Optionally set tickrate to 1000@@ -330,11 +365,6 @@ prepare() {echo "Setting performance governor..."scripts/config --disable CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTILscripts/config --enable CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE- echo "Disabling uneeded governors..."- scripts/config --disable CONFIG_CPU_FREQ_GOV_ONDEMAND- scripts/config --disable CONFIG_CPU_FREQ_GOV_CONSERVATIVE- scripts/config --disable CONFIG_CPU_FREQ_GOV_USERSPACE- scripts/config --disable CONFIG_CPU_FREQ_GOV_SCHEDUTILecho "Set PCIEASPM DRIVER to performance..."scripts/config --enable CONFIG_PCIEASPMscripts/config --enable CONFIG_PCIEASPM_PERFORMANCE@@ -342,6 +372,33 @@ prepare() {scripts/config --enable CONFIG_PCIE_BUS_PERFORMANCEfi+ ### Selecting between tickless idle, perodic tics or full tickless+ if [ "$_tickrate" = "perodic" ]; then+ echo "Enabling periodic ticks..."+ scripts/config --disable CONFIG_NO_HZ_IDLE+ scripts/config --disable CONFIG_NO_HZ_FULL+ scripts/config --disable CONFIG_NO_HZ+ scripts/config --disable CONFIG_NO_HZ_COMMON+ scripts/config --enable CONFIG_HZ_PERIODIC+ elif [ "$_tickrate" = "idle" ]; then+ echo "Enabling tickless idle..."+ scripts/config --disable CONFIG_HZ_PERIODIC+ scripts/config --disable CONFIG_NO_HZ_FULL+ scripts/config --enable CONFIG_NO_HZ_IDLE+ scripts/config --enable CONFIG_NO_HZ+ scripts/config --enable CONFIG_NO_HZ_COMMON+ elif [ "$_tickrate" = "full" ]; then+ echo "Enabling tickless idle..."+ scripts/config --disable CONFIG_HZ_PERIODIC+ scripts/config --disable CONFIG_NO_HZ_IDLE+ scripts/config --disable CONFIG_CONTEXT_TRACKING_FORCE+ scripts/config --enable CONFIG_NO_HZ_FULL_NODEF+ scripts/config --enable CONFIG_NO_HZ_FULL+ scripts/config --enable CONFIG_NO_HZ+ scripts/config --enable CONFIG_NO_HZ_COMMON+ scripts/config --enable CONFIG_CONTEXT_TRACKING+ fi+### Enable KBUILD_CFLAGS -O3if [ -n "$_cc_harder" ]; thenecho "Enabling KBUILD_CFLAGS -O3..."@@ -369,7 +426,7 @@ prepare() {### Enable SPFif [ -n "$_spf_enable" ]; then- echo "Enabling multigenerational LRU..."+ echo "Enabling SPECULATIVE_PAGE_FAULT LRU..."scripts/config --enable CONFIG_SPECULATIVE_PAGE_FAULTfi@@ -514,6 +571,9 @@ prepare() {scripts/config --disable CONFIG_SCHED_DEBUGscripts/config --disable CONFIG_KVM_WERROR+ echo "Enable CONFIG_USER_NS_UNPRIVILEGED"+ scripts/config --enable CONFIG_USER_NS+### Optionally use running kernel's config# code originally by nous; http://aur.archlinux.org/packages.php?ID=40191if [ -n "$_use_current" ]; then@@ -685,7 +745,7 @@ donesha256sums=('6e3cd56ee83a9cb5ac3fde1442c40367ab67368946c4c93bbeb1c65664a0d3c5''29c5dd2ae6b452b75b25816a8f6610fa2ff54f21b22a0ccef5c2e98a7077eb36'- '25ff374e8fe339dc28042cb38defe245c71aae9689dfaf3e5cc84a546150e45b'+ 'a1f1dba089c7e66f549e5343462fd87c033c28dc53788417061dc71114b26c5b''e2109061823fe11e99eb5002b3d553ef9629c8495b974af36fc4113889dd0080''efd954e75525fb169c3e7d5f4a8b673f8a59469c9c5f8843c9255efbda48e6a9''80d4a1e4c7f3cbed102de9079859b34a942d4e6424bf86c34a6b00d90f51fdb3'diff --git a/linux-cachyos-tt/.SRCINFO b/linux-cachyos-tt/.SRCINFOindex e5eca9a5..b7170345 100755--- a/linux-cachyos-tt/.SRCINFO+++ b/linux-cachyos-tt/.SRCINFO@@ -1,7 +1,7 @@pkgbase = linux-cachyos-tt- pkgdesc = Linux TT scheduler Kernel by CachyOS and other patches and improvements+ pkgdesc = Linux TT scheduler Kernel by CachyOS with other patches and improvementspkgver = 5.17.4- pkgrel = 1+ pkgrel = 2url = https://github.com/CachyOS/linux-cachyosarch = x86_64arch = x86_64_v3@@ -66,7 +66,7 @@ pkgbase = linux-cachyos-ttsha256sums = 65ec9ac5b8b28d5b61df1c72498059be2e7cb1f9b965bac0e4ffed3c05520b2bpkgname = linux-cachyos-tt- pkgdesc = The Linux TT scheduler Kernel by CachyOS and other patches and improvements kernel and modules+ pkgdesc = The Linux TT scheduler Kernel by CachyOS with other patches and improvements kernel and modulesdepends = coreutilsdepends = kmoddepends = initramfs@@ -78,5 +78,5 @@ pkgname = linux-cachyos-ttprovides = KSMBD-MODULEpkgname = linux-cachyos-tt-headers- pkgdesc = Headers and scripts for building modules for the Linux TT scheduler Kernel by CachyOS and other patches and improvements kernel+ pkgdesc = Headers and scripts for building modules for the Linux TT scheduler Kernel by CachyOS with other patches and improvements kerneldepends = paholediff --git a/linux-cachyos-tt/PKGBUILD b/linux-cachyos-tt/PKGBUILDindex 8db6fcc2..5c83bb99 100644--- a/linux-cachyos-tt/PKGBUILD+++ b/linux-cachyos-tt/PKGBUILD@@ -52,12 +52,16 @@ _per_gov=y### Enable TCP_CONG_BBR2_tcp_bbr2=y-### Running with a 1000HZ, 750Hz or 500HZ tick rate+### Running with a 1000HZ, 750Hz, 600 Hz or 500Hz tick rate_1k_HZ_ticks=_750_HZ_ticks=y_600_HZ_ticks=_500_HZ_ticks=+##ä Choose between perodic, tickless idle or full tickless+### Full tickless can give higher performances in various cases but, depending on hardware, lower consistency. Just tickless idle can perform better on some platforms (mostly AMD based).+_tickrate=full+### Disable MQ-Deadline I/O scheduler_mq_deadline_disable=y@@ -105,16 +109,18 @@ _zstd_compression=y_nf_cone=y-## Enable it for compiling with LLVM and THINLTO+# Clang LTO mode, only available with the "llvm" compiler - options are "no", "full" or "thin".+# "full: uses 1 thread for Linking, slow and uses more memory, theoretically with the highest performance gains."+# "thin: uses multiple threads, faster and uses less memory, may have a lower runtime performance than Full."_use_llvm_lto=# Enable it for using the LLVM CFI PATCH for a better security_use_cfi=if [ -n "$_use_llvm_lto" ]; then- pkgbase=linux-cachyos-tt-lto+ pkgbase=linux-cachyos-${_cpusched}-ltoelse- pkgbase=linux-cachyos-tt+ pkgbase=linux-cachyos-${_cpusched}fi_major=5.17_minor=4@@ -127,8 +133,8 @@ _stable=${_major}.${_minor}_srcname=linux-${_stable}#_srcname=linux-${_major}arch=(x86_64 x86_64_v3)-pkgdesc='Linux TT scheduler Kernel by CachyOS and other patches and improvements'-pkgrel=1+pkgdesc='Linux TT scheduler Kernel by CachyOS with other patches and improvements'+pkgrel=2arch=('x86_64' 'x86_64_v3')url="https://github.com/CachyOS/linux-cachyos"license=('GPL2')@@ -141,10 +147,26 @@ _patchsource="https://raw.githubusercontent.com/ptr1337/kernel-patches/master/${source=("https://cdn.kernel.org/pub/linux/kernel/v${pkgver%%.*}.x/${_srcname}.tar.xz""config"- # "${_patchsource}/sched/0001-prjc.patch"- # "${_patchsource}/sched/0001-cacULE.patch"- # "${_patchsource}/sched/0001-bore-sched.patch"- "${_patchsource}/sched/0001-tt.patch"+)+if [ "$_cpusched" = "bmq" ]; then+ source+=("${_patchsource}/sched/0001-prjc.patch")+fi+if [ "$_cpusched" = "pds" ]; then+ source+=("${_patchsource}/sched/0001-prjc.patch")+fi+if [ "$_cpusched" = "cacule" ]; then+ source+=("${_patchsource}/sched/0001-cacULE.patch")+fi+if [ "$_cpusched" = "cacule-rdb" ]; then+ source+=("${_patchsource}/sched/0001-cacULE.patch")+fi+if [ "$_cpusched" = "tt" ]; then+ source+=("${_patchsource}/sched/0001-tt.patch")+fi+if [ "$_cpusched" = "bore" ]; then+ source+=("${_patchsource}/sched/0001-bore-sched.patch")+fi+source+=("${_patchsource}/0001-arch.patch""${_patchsource}/0002-anbox.patch""${_patchsource}/0003-bbr2.patch"@@ -161,7 +183,6 @@ source=("${_patchsource}/0014-lrng.patch""${_patchsource}/0015-le9.patch""${_patchsource}/0016-ck-hrtimer.patch"- # "${_patchsource}/0017-FG-KASLR.patch""auto-cpu-optimization.sh")@@ -253,7 +274,9 @@ prepare() {scripts/config --enable CONFIG_CFI_CLANGfi- if [ -n "$_use_llvm_lto" ]; then+ ### Selecting the THIN or FULL-LTO compression level+ if [ "$_use_llvm_lto" = "thin" ]; then+ echo "Enabling highest ZSTD compression ratio..."scripts/config --disable LTO_NONE \--enable LTO \--enable LTO_CLANG \@@ -262,6 +285,18 @@ prepare() {--enable HAS_LTO_CLANG \--enable LTO_CLANG_THIN \--enable HAVE_GCC_PLUGINS+ elif [ "$_use_llvm_lto" = "full" ]; then+ echo "Enabling standard ZSTD compression ratio..."+ scripts/config --disable LTO_NONE \+ --enable LTO \+ --enable LTO_CLANG \+ --enable ARCH_SUPPORTS_LTO_CLANG \+ --enable ARCH_SUPPORTS_LTO_CLANG_THIN \+ --enable HAS_LTO_CLANG \+ --enable LTO_CLANG \+ --enable HAVE_GCC_PLUGINS+ else+ scripts/config --enable CONFIG_LTO_NONEfi### Optionally set tickrate to 1000@@ -331,11 +366,6 @@ prepare() {echo "Setting performance governor..."scripts/config --disable CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTILscripts/config --enable CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE- echo "Disabling uneeded governors..."- scripts/config --disable CONFIG_CPU_FREQ_GOV_ONDEMAND- scripts/config --disable CONFIG_CPU_FREQ_GOV_CONSERVATIVE- scripts/config --disable CONFIG_CPU_FREQ_GOV_USERSPACE- scripts/config --disable CONFIG_CPU_FREQ_GOV_SCHEDUTILecho "Set PCIEASPM DRIVER to performance..."scripts/config --enable CONFIG_PCIEASPMscripts/config --enable CONFIG_PCIEASPM_PERFORMANCE@@ -343,6 +373,33 @@ prepare() {scripts/config --enable CONFIG_PCIE_BUS_PERFORMANCEfi+ ### Selecting between tickless idle, perodic tics or full tickless+ if [ "$_tickrate" = "perodic" ]; then+ echo "Enabling periodic ticks..."+ scripts/config --disable CONFIG_NO_HZ_IDLE+ scripts/config --disable CONFIG_NO_HZ_FULL+ scripts/config --disable CONFIG_NO_HZ+ scripts/config --disable CONFIG_NO_HZ_COMMON+ scripts/config --enable CONFIG_HZ_PERIODIC+ elif [ "$_tickrate" = "idle" ]; then+ echo "Enabling tickless idle..."+ scripts/config --disable CONFIG_HZ_PERIODIC+ scripts/config --disable CONFIG_NO_HZ_FULL+ scripts/config --enable CONFIG_NO_HZ_IDLE+ scripts/config --enable CONFIG_NO_HZ+ scripts/config --enable CONFIG_NO_HZ_COMMON+ elif [ "$_tickrate" = "full" ]; then+ echo "Enabling tickless idle..."+ scripts/config --disable CONFIG_HZ_PERIODIC+ scripts/config --disable CONFIG_NO_HZ_IDLE+ scripts/config --disable CONFIG_CONTEXT_TRACKING_FORCE+ scripts/config --enable CONFIG_NO_HZ_FULL_NODEF+ scripts/config --enable CONFIG_NO_HZ_FULL+ scripts/config --enable CONFIG_NO_HZ+ scripts/config --enable CONFIG_NO_HZ_COMMON+ scripts/config --enable CONFIG_CONTEXT_TRACKING+ fi+### Enable KBUILD_CFLAGS -O3if [ -n "$_cc_harder" ]; thenecho "Enabling KBUILD_CFLAGS -O3..."@@ -370,7 +427,7 @@ prepare() {### Enable SPFif [ -n "$_spf_enable" ]; then- echo "Enabling multigenerational LRU..."+ echo "Enabling SPECULATIVE_PAGE_FAULT LRU..."scripts/config --enable CONFIG_SPECULATIVE_PAGE_FAULTfi@@ -515,6 +572,9 @@ prepare() {scripts/config --disable CONFIG_SCHED_DEBUGscripts/config --disable CONFIG_KVM_WERROR+ echo "Enable CONFIG_USER_NS_UNPRIVILEGED"+ scripts/config --enable CONFIG_USER_NS+### Optionally use running kernel's config# code originally by nous; http://aur.archlinux.org/packages.php?ID=40191if [ -n "$_use_current" ]; thendiff --git a/linux-cachyos/.SRCINFO b/linux-cachyos/.SRCINFOindex 3abc612d..954b1476 100755--- a/linux-cachyos/.SRCINFO+++ b/linux-cachyos/.SRCINFO@@ -1,7 +1,7 @@pkgbase = linux-cachyos- pkgdesc = Linux CFS scheduler Kernel by CachyOS and with other patches and improvements+ pkgdesc = Linux CFS scheduler Kernel by CachyOS with other patches and improvementspkgver = 5.17.4- pkgrel = 1+ pkgrel = 2url = https://github.com/CachyOS/linux-cachyosarch = x86_64arch = x86_64_v3@@ -64,7 +64,7 @@ pkgbase = linux-cachyossha256sums = 65ec9ac5b8b28d5b61df1c72498059be2e7cb1f9b965bac0e4ffed3c05520b2bpkgname = linux-cachyos- pkgdesc = The Linux CFS scheduler Kernel by CachyOS and with other patches and improvements kernel and modules+ pkgdesc = The Linux CFS scheduler Kernel by CachyOS with other patches and improvements kernel and modulesdepends = coreutilsdepends = kmoddepends = initramfs@@ -76,5 +76,5 @@ pkgname = linux-cachyosprovides = KSMBD-MODULEpkgname = linux-cachyos-headers- pkgdesc = Headers and scripts for building modules for the Linux CFS scheduler Kernel by CachyOS and with other patches and improvements kernel+ pkgdesc = Headers and scripts for building modules for the Linux CFS scheduler Kernel by CachyOS with other patches and improvements kerneldepends = paholediff --git a/linux-cachyos/PKGBUILD b/linux-cachyos/PKGBUILDindex c9f79837..ed99eb35 100644--- a/linux-cachyos/PKGBUILD+++ b/linux-cachyos/PKGBUILD@@ -24,7 +24,7 @@ _makenconfig=# NUMA is optimized for multi-socket motherboards.# A single multi-core CPU actually runs slower with NUMA enabled.# See, https://bugs.archlinux.org/task/31187-_NUMAdisable=+_NUMAdisable=y# Compile ONLY used modules to VASTLYreduce the number of modules built# and the build time.@@ -52,12 +52,16 @@ _per_gov=y### Enable TCP_CONG_BBR2_tcp_bbr2=y-### Running with a 1000HZ, 750Hz or 500HZ tick rate+### Running with a 1000HZ, 750Hz, 600 Hz or 500Hz tick rate_1k_HZ_ticks=_750_HZ_ticks=y_600_HZ_ticks=_500_HZ_ticks=+##ä Choose between perodic, tickless idle or full tickless+### Full tickless can give higher performances in various cases but, depending on hardware, lower consistency. Just tickless idle can perform better on some platforms (mostly AMD based).+_tickrate=full+### Disable MQ-Deadline I/O scheduler_mq_deadline_disable=y@@ -71,6 +75,7 @@ _lru_enable=y_damon=y_spf_enable=y+### Enable Linux Random Number Generator_lrng_enable=y@@ -104,13 +109,14 @@ _zstd_compression=y_nf_cone=y-## Enable it for compiling with LLVM and THINLTO+# Clang LTO mode, only available with the "llvm" compiler - options are "no", "full" or "thin".+# "full: uses 1 thread for Linking, slow and uses more memory, theoretically with the highest performance gains."+# "thin: uses multiple threads, faster and uses less memory, may have a lower runtime performance than Full."_use_llvm_lto=# Enable it for using the LLVM CFI PATCH for a better security_use_cfi=-if [ -n "$_use_llvm_lto" ]; thenpkgbase=linux-cachyos-ltoelse@@ -127,8 +133,8 @@ _stable=${_major}.${_minor}_srcname=linux-${_stable}#_srcname=linux-${_major}arch=(x86_64 x86_64_v3)-pkgdesc='Linux CFS scheduler Kernel by CachyOS and with other patches and improvements'-pkgrel=1+pkgdesc='Linux CFS scheduler Kernel by CachyOS with other patches and improvements'+pkgrel=2arch=('x86_64' 'x86_64_v3')url="https://github.com/CachyOS/linux-cachyos"license=('GPL2')@@ -141,10 +147,26 @@ _patchsource="https://raw.githubusercontent.com/ptr1337/kernel-patches/master/${source=("https://cdn.kernel.org/pub/linux/kernel/v${pkgver%%.*}.x/${_srcname}.tar.xz""config"- # "${_patchsource}/sched/0001-prjc.patch"- # "${_patchsource}/sched/0001-cacULE.patch"- # "${_patchsource}/sched/0001-bore-sched.patch"- # "${_patchsource}/sched/0001-tt.patch"+)+if [ "$_cpusched" = "bmq" ]; then+ source+=("${_patchsource}/sched/0001-prjc.patch")+fi+if [ "$_cpusched" = "pds" ]; then+ source+=("${_patchsource}/sched/0001-prjc.patch")+fi+if [ "$_cpusched" = "cacule" ]; then+ source+=("${_patchsource}/sched/0001-cacULE.patch")+fi+if [ "$_cpusched" = "cacule-rdb" ]; then+ source+=("${_patchsource}/sched/0001-cacULE.patch")+fi+if [ "$_cpusched" = "tt" ]; then+ source+=("${_patchsource}/sched/0001-tt.patch")+fi+if [ "$_cpusched" = "bore" ]; then+ source+=("${_patchsource}/sched/0001-bore-sched.patch")+fi+source+=("${_patchsource}/0001-arch.patch""${_patchsource}/0002-anbox.patch""${_patchsource}/0003-bbr2.patch"@@ -161,7 +183,6 @@ source=("${_patchsource}/0014-lrng.patch""${_patchsource}/0015-le9.patch""${_patchsource}/0016-ck-hrtimer.patch"- # "${_patchsource}/0017-FG-KASLR.patch""auto-cpu-optimization.sh")@@ -253,7 +274,9 @@ prepare() {scripts/config --enable CONFIG_CFI_CLANGfi- if [ -n "$_use_llvm_lto" ]; then+ ### Selecting the THIN or FULL-LTO compression level+ if [ "$_use_llvm_lto" = "thin" ]; then+ echo "Enabling highest ZSTD compression ratio..."scripts/config --disable LTO_NONE \--enable LTO \--enable LTO_CLANG \@@ -262,6 +285,18 @@ prepare() {--enable HAS_LTO_CLANG \--enable LTO_CLANG_THIN \--enable HAVE_GCC_PLUGINS+ elif [ "$_use_llvm_lto" = "full" ]; then+ echo "Enabling standard ZSTD compression ratio..."+ scripts/config --disable LTO_NONE \+ --enable LTO \+ --enable LTO_CLANG \+ --enable ARCH_SUPPORTS_LTO_CLANG \+ --enable ARCH_SUPPORTS_LTO_CLANG_THIN \+ --enable HAS_LTO_CLANG \+ --enable LTO_CLANG \+ --enable HAVE_GCC_PLUGINS+ else+ scripts/config --enable CONFIG_LTO_NONEfi### Optionally set tickrate to 1000@@ -331,11 +366,6 @@ prepare() {echo "Setting performance governor..."scripts/config --disable CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTILscripts/config --enable CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE- echo "Disabling uneeded governors..."- scripts/config --disable CONFIG_CPU_FREQ_GOV_ONDEMAND- scripts/config --disable CONFIG_CPU_FREQ_GOV_CONSERVATIVE- scripts/config --disable CONFIG_CPU_FREQ_GOV_USERSPACE- scripts/config --disable CONFIG_CPU_FREQ_GOV_SCHEDUTILecho "Set PCIEASPM DRIVER to performance..."scripts/config --enable CONFIG_PCIEASPMscripts/config --enable CONFIG_PCIEASPM_PERFORMANCE@@ -343,6 +373,33 @@ prepare() {scripts/config --enable CONFIG_PCIE_BUS_PERFORMANCEfi+ ### Selecting between tickless idle, perodic tics or full tickless+ if [ "$_tickrate" = "perodic" ]; then+ echo "Enabling periodic ticks..."+ scripts/config --disable CONFIG_NO_HZ_IDLE+ scripts/config --disable CONFIG_NO_HZ_FULL+ scripts/config --disable CONFIG_NO_HZ+ scripts/config --disable CONFIG_NO_HZ_COMMON+ scripts/config --enable CONFIG_HZ_PERIODIC+ elif [ "$_tickrate" = "idle" ]; then+ echo "Enabling tickless idle..."+ scripts/config --disable CONFIG_HZ_PERIODIC+ scripts/config --disable CONFIG_NO_HZ_FULL+ scripts/config --enable CONFIG_NO_HZ_IDLE+ scripts/config --enable CONFIG_NO_HZ+ scripts/config --enable CONFIG_NO_HZ_COMMON+ elif [ "$_tickrate" = "full" ]; then+ echo "Enabling tickless idle..."+ scripts/config --disable CONFIG_HZ_PERIODIC+ scripts/config --disable CONFIG_NO_HZ_IDLE+ scripts/config --disable CONFIG_CONTEXT_TRACKING_FORCE+ scripts/config --enable CONFIG_NO_HZ_FULL_NODEF+ scripts/config --enable CONFIG_NO_HZ_FULL+ scripts/config --enable CONFIG_NO_HZ+ scripts/config --enable CONFIG_NO_HZ_COMMON+ scripts/config --enable CONFIG_CONTEXT_TRACKING+ fi+### Enable KBUILD_CFLAGS -O3if [ -n "$_cc_harder" ]; thenecho "Enabling KBUILD_CFLAGS -O3..."@@ -370,7 +427,7 @@ prepare() {### Enable SPFif [ -n "$_spf_enable" ]; then- echo "Enabling multigenerational LRU..."+ echo "Enabling SPECULATIVE_PAGE_FAULT LRU..."scripts/config --enable CONFIG_SPECULATIVE_PAGE_FAULTfi@@ -515,6 +572,9 @@ prepare() {scripts/config --disable CONFIG_SCHED_DEBUGscripts/config --disable CONFIG_KVM_WERROR+ echo "Enable CONFIG_USER_NS_UNPRIVILEGED"+ scripts/config --enable CONFIG_USER_NS+### Optionally use running kernel's config# code originally by nous; http://aur.archlinux.org/packages.php?ID=40191if [ -n "$_use_current" ]; thendiff --git a/linux-cacule-rdb/.SRCINFO b/linux-cacule-rdb/.SRCINFOindex e7c3fe0c..6499ec20 100755--- a/linux-cacule-rdb/.SRCINFO+++ b/linux-cacule-rdb/.SRCINFO@@ -1,7 +1,7 @@pkgbase = linux-cacule-rdbpkgdesc = Linux cacULE-RDB scheduler Kernel by CachyOS with other patches and improvementspkgver = 5.17.4- pkgrel = 1+ pkgrel = 2url = https://github.com/CachyOS/linux-cachyosarch = x86_64arch = x86_64_v3diff --git a/linux-cacule-rdb/PKGBUILD b/linux-cacule-rdb/PKGBUILDindex b5f2656f..a5704eee 100644--- a/linux-cacule-rdb/PKGBUILD+++ b/linux-cacule-rdb/PKGBUILD@@ -52,12 +52,16 @@ _per_gov=y### Enable TCP_CONG_BBR2_tcp_bbr2=y-### Running with a 1000HZ, 750Hz or 500HZ tick rate+### Running with a 1000HZ, 750Hz, 600 Hz or 500Hz tick rate_1k_HZ_ticks=_750_HZ_ticks=y_600_HZ_ticks=_500_HZ_ticks=+##ä Choose between perodic, tickless idle or full tickless+### Full tickless can give higher performances in various cases but, depending on hardware, lower consistency. Just tickless idle can perform better on some platforms (mostly AMD based).+_tickrate=full+### Disable MQ-Deadline I/O scheduler_mq_deadline_disable=y@@ -105,16 +109,18 @@ _zstd_compression=y_nf_cone=y-## Enable it for compiling with LLVM and THINLTO+# Clang LTO mode, only available with the "llvm" compiler - options are "no", "full" or "thin".+# "full: uses 1 thread for Linking, slow and uses more memory, theoretically with the highest performance gains."+# "thin: uses multiple threads, faster and uses less memory, may have a lower runtime performance than Full."_use_llvm_lto=# Enable it for using the LLVM CFI PATCH for a better security_use_cfi=if [ -n "$_use_llvm_lto" ]; then- pkgbase=linux-cacule-rdb-lto+ pkgbase=linux-${_cpusched}-ltoelse- pkgbase=linux-cacule-rdb+ pkgbase=linux-${_cpusched}fi_major=5.17_minor=4@@ -128,7 +134,7 @@ _srcname=linux-${_stable}#_srcname=linux-${_major}arch=(x86_64 x86_64_v3)pkgdesc='Linux cacULE-RDB scheduler Kernel by CachyOS with other patches and improvements'-pkgrel=1+pkgrel=2arch=('x86_64' 'x86_64_v3')url="https://github.com/CachyOS/linux-cachyos"license=('GPL2')@@ -141,10 +147,26 @@ _patchsource="https://raw.githubusercontent.com/ptr1337/kernel-patches/master/${source=("https://cdn.kernel.org/pub/linux/kernel/v${pkgver%%.*}.x/${_srcname}.tar.xz""config"- # "${_patchsource}/sched/0001-prjc.patch"- "${_patchsource}/sched/0001-cacULE.patch"- # "${_patchsource}/sched/0001-bore-sched.patch"- # "${_patchsource}/sched/0001-tt.patch"+)+if [ "$_cpusched" = "bmq" ]; then+ source+=("${_patchsource}/sched/0001-prjc.patch")+fi+if [ "$_cpusched" = "pds" ]; then+ source+=("${_patchsource}/sched/0001-prjc.patch")+fi+if [ "$_cpusched" = "cacule" ]; then+ source+=("${_patchsource}/sched/0001-cacULE.patch")+fi+if [ "$_cpusched" = "cacule-rdb" ]; then+ source+=("${_patchsource}/sched/0001-cacULE.patch")+fi+if [ "$_cpusched" = "tt" ]; then+ source+=("${_patchsource}/sched/0001-tt.patch")+fi+if [ "$_cpusched" = "bore" ]; then+ source+=("${_patchsource}/sched/0001-bore-sched.patch")+fi+source+=("${_patchsource}/0001-arch.patch""${_patchsource}/0002-anbox.patch""${_patchsource}/0003-bbr2.patch"@@ -161,7 +183,6 @@ source=("${_patchsource}/0014-lrng.patch""${_patchsource}/0015-le9.patch""${_patchsource}/0016-ck-hrtimer.patch"- # "${_patchsource}/0017-FG-KASLR.patch""auto-cpu-optimization.sh")@@ -253,7 +274,9 @@ prepare() {scripts/config --enable CONFIG_CFI_CLANGfi- if [ -n "$_use_llvm_lto" ]; then+ ### Selecting the THIN or FULL-LTO compression level+ if [ "$_use_llvm_lto" = "thin" ]; then+ echo "Enabling highest ZSTD compression ratio..."scripts/config --disable LTO_NONE \--enable LTO \--enable LTO_CLANG \@@ -262,6 +285,18 @@ prepare() {--enable HAS_LTO_CLANG \--enable LTO_CLANG_THIN \--enable HAVE_GCC_PLUGINS+ elif [ "$_use_llvm_lto" = "full" ]; then+ echo "Enabling standard ZSTD compression ratio..."+ scripts/config --disable LTO_NONE \+ --enable LTO \+ --enable LTO_CLANG \+ --enable ARCH_SUPPORTS_LTO_CLANG \+ --enable ARCH_SUPPORTS_LTO_CLANG_THIN \+ --enable HAS_LTO_CLANG \+ --enable LTO_CLANG \+ --enable HAVE_GCC_PLUGINS+ else+ scripts/config --enable CONFIG_LTO_NONEfi### Optionally set tickrate to 1000@@ -331,11 +366,6 @@ prepare() {echo "Setting performance governor..."scripts/config --disable CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTILscripts/config --enable CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE- echo "Disabling uneeded governors..."- scripts/config --disable CONFIG_CPU_FREQ_GOV_ONDEMAND- scripts/config --disable CONFIG_CPU_FREQ_GOV_CONSERVATIVE- scripts/config --disable CONFIG_CPU_FREQ_GOV_USERSPACE- scripts/config --disable CONFIG_CPU_FREQ_GOV_SCHEDUTILecho "Set PCIEASPM DRIVER to performance..."scripts/config --enable CONFIG_PCIEASPMscripts/config --enable CONFIG_PCIEASPM_PERFORMANCE@@ -343,6 +373,33 @@ prepare() {scripts/config --enable CONFIG_PCIE_BUS_PERFORMANCEfi+ ### Selecting between tickless idle, perodic tics or full tickless+ if [ "$_tickrate" = "perodic" ]; then+ echo "Enabling periodic ticks..."+ scripts/config --disable CONFIG_NO_HZ_IDLE+ scripts/config --disable CONFIG_NO_HZ_FULL+ scripts/config --disable CONFIG_NO_HZ+ scripts/config --disable CONFIG_NO_HZ_COMMON+ scripts/config --enable CONFIG_HZ_PERIODIC+ elif [ "$_tickrate" = "idle" ]; then+ echo "Enabling tickless idle..."+ scripts/config --disable CONFIG_HZ_PERIODIC+ scripts/config --disable CONFIG_NO_HZ_FULL+ scripts/config --enable CONFIG_NO_HZ_IDLE+ scripts/config --enable CONFIG_NO_HZ+ scripts/config --enable CONFIG_NO_HZ_COMMON+ elif [ "$_tickrate" = "full" ]; then+ echo "Enabling tickless idle..."+ scripts/config --disable CONFIG_HZ_PERIODIC+ scripts/config --disable CONFIG_NO_HZ_IDLE+ scripts/config --disable CONFIG_CONTEXT_TRACKING_FORCE+ scripts/config --enable CONFIG_NO_HZ_FULL_NODEF+ scripts/config --enable CONFIG_NO_HZ_FULL+ scripts/config --enable CONFIG_NO_HZ+ scripts/config --enable CONFIG_NO_HZ_COMMON+ scripts/config --enable CONFIG_CONTEXT_TRACKING+ fi+### Enable KBUILD_CFLAGS -O3if [ -n "$_cc_harder" ]; thenecho "Enabling KBUILD_CFLAGS -O3..."@@ -370,7 +427,7 @@ prepare() {### Enable SPFif [ -n "$_spf_enable" ]; then- echo "Enabling multigenerational LRU..."+ echo "Enabling SPECULATIVE_PAGE_FAULT LRU..."scripts/config --enable CONFIG_SPECULATIVE_PAGE_FAULTfi@@ -515,6 +572,9 @@ prepare() {scripts/config --disable CONFIG_SCHED_DEBUGscripts/config --disable CONFIG_KVM_WERROR+ echo "Enable CONFIG_USER_NS_UNPRIVILEGED"+ scripts/config --enable CONFIG_USER_NS+### Optionally use running kernel's config# code originally by nous; http://aur.archlinux.org/packages.php?ID=40191if [ -n "$_use_current" ]; thendiff --git a/linux-cacule/.SRCINFO b/linux-cacule/.SRCINFOindex 79cb9941..e84a41ca 100755--- a/linux-cacule/.SRCINFO+++ b/linux-cacule/.SRCINFO@@ -1,7 +1,7 @@pkgbase = linux-caculepkgdesc = Linux cacULE scheduler Kernel by CachyOS with other patches and improvementspkgver = 5.17.4- pkgrel = 1+ pkgrel = 2url = https://github.com/CachyOS/linux-cachyosarch = x86_64arch = x86_64_v3@@ -42,7 +42,6 @@ pkgbase = linux-caculesource = https://raw.githubusercontent.com/ptr1337/kernel-patches/master/5.17/0013-xanmod.patchsource = https://raw.githubusercontent.com/ptr1337/kernel-patches/master/5.17/0014-lrng.patchsource = https://raw.githubusercontent.com/ptr1337/kernel-patches/master/5.17/0015-le9.patch- source = https://raw.githubusercontent.com/ptr1337/kernel-patches/master/5.17/0016-ck-hrtimer.patchsource = auto-cpu-optimization.shsha256sums = 6e3cd56ee83a9cb5ac3fde1442c40367ab67368946c4c93bbeb1c65664a0d3c5sha256sums = 341d996a829058d17393f4d0cbfdb23c7a7a68ee682fd70cb8e37d27af63efa5@@ -62,7 +61,6 @@ pkgbase = linux-caculesha256sums = d2405846ab0501eb993180a0f6fa1e1ef81bac51a73ca00ff8ee3e75551b1886sha256sums = c7048e30409190daa5e1e5a7994f4a3c28d7bc4714b8256d3d67a562a3ab3becsha256sums = 0ec74fbdd5c114026f07128fb84d0191157b2787141645545722b3f52aaa2187- sha256sums = d15fe026c0872ec902dcfd35c180746488b294d9ebf059b8e2699f970ead3734sha256sums = 65ec9ac5b8b28d5b61df1c72498059be2e7cb1f9b965bac0e4ffed3c05520b2bpkgname = linux-caculediff --git a/linux-cacule/PKGBUILD b/linux-cacule/PKGBUILDindex 4e2485db..76a73498 100644--- a/linux-cacule/PKGBUILD+++ b/linux-cacule/PKGBUILD@@ -52,12 +52,16 @@ _per_gov=y### Enable TCP_CONG_BBR2_tcp_bbr2=y-### Running with a 1000HZ, 750Hz or 500HZ tick rate+### Running with a 1000HZ, 750Hz, 600 Hz or 500Hz tick rate_1k_HZ_ticks=_750_HZ_ticks=y_600_HZ_ticks=_500_HZ_ticks=+##ä Choose between perodic, tickless idle or full tickless+### Full tickless can give higher performances in various cases but, depending on hardware, lower consistency. Just tickless idle can perform better on some platforms (mostly AMD based).+_tickrate=full+### Disable MQ-Deadline I/O scheduler_mq_deadline_disable=y@@ -105,17 +109,18 @@ _zstd_compression=y_nf_cone=y-## Enable it for compiling with LLVM and THINLTO+# Clang LTO mode, only available with the "llvm" compiler - options are "no", "full" or "thin".+# "full: uses 1 thread for Linking, slow and uses more memory, theoretically with the highest performance gains."+# "thin: uses multiple threads, faster and uses less memory, may have a lower runtime performance than Full."_use_llvm_lto=# Enable it for using the LLVM CFI PATCH for a better security_use_cfi=-if [ -n "$_use_llvm_lto" ]; then- pkgbase=linux-cacule-lto+ pkgbase=linux-${_cpusched}-ltoelse- pkgbase=linux-cacule+ pkgbase=linux-${_cpusched}fi_major=5.17_minor=4@@ -129,7 +134,7 @@ _srcname=linux-${_stable}#_srcname=linux-${_major}arch=(x86_64 x86_64_v3)pkgdesc='Linux cacULE scheduler Kernel by CachyOS with other patches and improvements'-pkgrel=1+pkgrel=2arch=('x86_64' 'x86_64_v3')url="https://github.com/CachyOS/linux-cachyos"license=('GPL2')@@ -142,10 +147,26 @@ _patchsource="https://raw.githubusercontent.com/ptr1337/kernel-patches/master/${source=("https://cdn.kernel.org/pub/linux/kernel/v${pkgver%%.*}.x/${_srcname}.tar.xz""config"- # "${_patchsource}/sched/0001-prjc.patch"- "${_patchsource}/sched/0001-cacULE.patch"- # "${_patchsource}/sched/0001-bore-sched.patch"- # "${_patchsource}/sched/0001-tt.patch"+)+if [ "$_cpusched" = "bmq" ]; then+ source+=("${_patchsource}/sched/0001-prjc.patch")+fi+if [ "$_cpusched" = "pds" ]; then+ source+=("${_patchsource}/sched/0001-prjc.patch")+fi+if [ "$_cpusched" = "cacule" ]; then+ source+=("${_patchsource}/sched/0001-cacULE.patch")+fi+if [ "$_cpusched" = "cacule-rdb" ]; then+ source+=("${_patchsource}/sched/0001-cacULE.patch")+fi+if [ "$_cpusched" = "tt" ]; then+ source+=("${_patchsource}/sched/0001-tt.patch")+fi+if [ "$_cpusched" = "bore" ]; then+ source+=("${_patchsource}/sched/0001-bore-sched.patch")+fi+source+=("${_patchsource}/0001-arch.patch""${_patchsource}/0002-anbox.patch""${_patchsource}/0003-bbr2.patch"@@ -161,8 +182,6 @@ source=("${_patchsource}/0013-xanmod.patch""${_patchsource}/0014-lrng.patch""${_patchsource}/0015-le9.patch"- "${_patchsource}/0016-ck-hrtimer.patch"- # "${_patchsource}/0017-FG-KASLR.patch""auto-cpu-optimization.sh")@@ -254,7 +273,9 @@ prepare() {scripts/config --enable CONFIG_CFI_CLANGfi- if [ -n "$_use_llvm_lto" ]; then+ ### Selecting the THIN or FULL-LTO compression level+ if [ "$_use_llvm_lto" = "thin" ]; then+ echo "Enabling highest ZSTD compression ratio..."scripts/config --disable LTO_NONE \--enable LTO \--enable LTO_CLANG \@@ -263,6 +284,18 @@ prepare() {--enable HAS_LTO_CLANG \--enable LTO_CLANG_THIN \--enable HAVE_GCC_PLUGINS+ elif [ "$_use_llvm_lto" = "full" ]; then+ echo "Enabling standard ZSTD compression ratio..."+ scripts/config --disable LTO_NONE \+ --enable LTO \+ --enable LTO_CLANG \+ --enable ARCH_SUPPORTS_LTO_CLANG \+ --enable ARCH_SUPPORTS_LTO_CLANG_THIN \+ --enable HAS_LTO_CLANG \+ --enable LTO_CLANG \+ --enable HAVE_GCC_PLUGINS+ else+ scripts/config --enable CONFIG_LTO_NONEfi### Optionally set tickrate to 1000@@ -332,11 +365,6 @@ prepare() {echo "Setting performance governor..."scripts/config --disable CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTILscripts/config --enable CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE- echo "Disabling uneeded governors..."- scripts/config --disable CONFIG_CPU_FREQ_GOV_ONDEMAND- scripts/config --disable CONFIG_CPU_FREQ_GOV_CONSERVATIVE- scripts/config --disable CONFIG_CPU_FREQ_GOV_USERSPACE- scripts/config --disable CONFIG_CPU_FREQ_GOV_SCHEDUTILecho "Set PCIEASPM DRIVER to performance..."scripts/config --enable CONFIG_PCIEASPMscripts/config --enable CONFIG_PCIEASPM_PERFORMANCE@@ -344,6 +372,33 @@ prepare() {scripts/config --enable CONFIG_PCIE_BUS_PERFORMANCEfi+ ### Selecting between tickless idle, perodic tics or full tickless+ if [ "$_tickrate" = "perodic" ]; then+ echo "Enabling periodic ticks..."+ scripts/config --disable CONFIG_NO_HZ_IDLE+ scripts/config --disable CONFIG_NO_HZ_FULL+ scripts/config --disable CONFIG_NO_HZ+ scripts/config --disable CONFIG_NO_HZ_COMMON+ scripts/config --enable CONFIG_HZ_PERIODIC+ elif [ "$_tickrate" = "idle" ]; then+ echo "Enabling tickless idle..."+ scripts/config --disable CONFIG_HZ_PERIODIC+ scripts/config --disable CONFIG_NO_HZ_FULL+ scripts/config --enable CONFIG_NO_HZ_IDLE+ scripts/config --enable CONFIG_NO_HZ+ scripts/config --enable CONFIG_NO_HZ_COMMON+ elif [ "$_tickrate" = "full" ]; then+ echo "Enabling tickless idle..."+ scripts/config --disable CONFIG_HZ_PERIODIC+ scripts/config --disable CONFIG_NO_HZ_IDLE+ scripts/config --disable CONFIG_CONTEXT_TRACKING_FORCE+ scripts/config --enable CONFIG_NO_HZ_FULL_NODEF+ scripts/config --enable CONFIG_NO_HZ_FULL+ scripts/config --enable CONFIG_NO_HZ+ scripts/config --enable CONFIG_NO_HZ_COMMON+ scripts/config --enable CONFIG_CONTEXT_TRACKING+ fi+### Enable KBUILD_CFLAGS -O3if [ -n "$_cc_harder" ]; thenecho "Enabling KBUILD_CFLAGS -O3..."@@ -371,7 +426,7 @@ prepare() {### Enable SPFif [ -n "$_spf_enable" ]; then- echo "Enabling multigenerational LRU..."+ echo "Enabling SPECULATIVE_PAGE_FAULT LRU..."scripts/config --enable CONFIG_SPECULATIVE_PAGE_FAULTfi@@ -516,6 +571,9 @@ prepare() {scripts/config --disable CONFIG_SCHED_DEBUGscripts/config --disable CONFIG_KVM_WERROR+ echo "Enable CONFIG_USER_NS_UNPRIVILEGED"+ scripts/config --enable CONFIG_USER_NS+### Optionally use running kernel's config# code originally by nous; http://aur.archlinux.org/packages.php?ID=40191if [ -n "$_use_current" ]; then@@ -703,5 +761,4 @@ sha256sums=('6e3cd56ee83a9cb5ac3fde1442c40367ab67368946c4c93bbeb1c65664a0d3c5''d2405846ab0501eb993180a0f6fa1e1ef81bac51a73ca00ff8ee3e75551b1886''c7048e30409190daa5e1e5a7994f4a3c28d7bc4714b8256d3d67a562a3ab3bec''0ec74fbdd5c114026f07128fb84d0191157b2787141645545722b3f52aaa2187'- 'd15fe026c0872ec902dcfd35c180746488b294d9ebf059b8e2699f970ead3734''65ec9ac5b8b28d5b61df1c72498059be2e7cb1f9b965bac0e4ffed3c05520b2b')diff --git a/linux-tt/.SRCINFO b/linux-tt/.SRCINFOindex cfcfb972..1ec23ddf 100755--- a/linux-tt/.SRCINFO+++ b/linux-tt/.SRCINFO@@ -1,7 +1,7 @@pkgbase = linux-tt- pkgdesc = Linux TT scheduler Kernel by CachyOS and other patches and improvements+ pkgdesc = Linux TT scheduler Kernel by CachyOS with other patches and improvementspkgver = 5.17.4- pkgrel = 1+ pkgrel = 2url = https://github.com/CachyOS/linux-cachyosarch = x86_64arch = x86_64_v3@@ -66,7 +66,7 @@ pkgbase = linux-ttsha256sums = 65ec9ac5b8b28d5b61df1c72498059be2e7cb1f9b965bac0e4ffed3c05520b2bpkgname = linux-tt- pkgdesc = The Linux TT scheduler Kernel by CachyOS and other patches and improvements kernel and modules+ pkgdesc = The Linux TT scheduler Kernel by CachyOS with other patches and improvements kernel and modulesdepends = coreutilsdepends = kmoddepends = initramfs@@ -78,5 +78,5 @@ pkgname = linux-ttprovides = KSMBD-MODULEpkgname = linux-tt-headers- pkgdesc = Headers and scripts for building modules for the Linux TT scheduler Kernel by CachyOS and other patches and improvements kernel+ pkgdesc = Headers and scripts for building modules for the Linux TT scheduler Kernel by CachyOS with other patches and improvements kerneldepends = paholediff --git a/linux-tt/PKGBUILD b/linux-tt/PKGBUILDindex 31d797d4..d8334708 100644--- a/linux-tt/PKGBUILD+++ b/linux-tt/PKGBUILD@@ -52,12 +52,16 @@ _per_gov=y### Enable TCP_CONG_BBR2_tcp_bbr2=y-### Running with a 1000HZ, 750Hz or 500HZ tick rate+### Running with a 1000HZ, 750Hz, 600 Hz or 500Hz tick rate_1k_HZ_ticks=_750_HZ_ticks=y_600_HZ_ticks=_500_HZ_ticks=+##ä Choose between perodic, tickless idle or full tickless+### Full tickless can give higher performances in various cases but, depending on hardware, lower consistency. Just tickless idle can perform better on some platforms (mostly AMD based).+_tickrate=full+### Disable MQ-Deadline I/O scheduler_mq_deadline_disable=y@@ -105,16 +109,18 @@ _zstd_compression=y_nf_cone=y-## Enable it for compiling with LLVM and THINLTO+# Clang LTO mode, only available with the "llvm" compiler - options are "no", "full" or "thin".+# "full: uses 1 thread for Linking, slow and uses more memory, theoretically with the highest performance gains."+# "thin: uses multiple threads, faster and uses less memory, may have a lower runtime performance than Full."_use_llvm_lto=# Enable it for using the LLVM CFI PATCH for a better security_use_cfi=if [ -n "$_use_llvm_lto" ]; then- pkgbase=linux-tt-lto+ pkgbase=linux-${_cpusched}-ltoelse- pkgbase=linux-tt+ pkgbase=linux-${_cpusched}fi_major=5.17_minor=4@@ -127,8 +133,8 @@ _stable=${_major}.${_minor}_srcname=linux-${_stable}#_srcname=linux-${_major}arch=(x86_64 x86_64_v3)-pkgdesc='Linux TT scheduler Kernel by CachyOS and other patches and improvements'-pkgrel=1+pkgdesc='Linux TT scheduler Kernel by CachyOS with other patches and improvements'+pkgrel=2arch=('x86_64' 'x86_64_v3')url="https://github.com/CachyOS/linux-cachyos"license=('GPL2')@@ -141,10 +147,26 @@ _patchsource="https://raw.githubusercontent.com/ptr1337/kernel-patches/master/${source=("https://cdn.kernel.org/pub/linux/kernel/v${pkgver%%.*}.x/${_srcname}.tar.xz""config"- # "${_patchsource}/sched/0001-prjc.patch"- # "${_patchsource}/sched/0001-cacULE.patch"- # "${_patchsource}/sched/0001-bore-sched.patch"- "${_patchsource}/sched/0001-tt.patch"+)+if [ "$_cpusched" = "bmq" ]; then+ source+=("${_patchsource}/sched/0001-prjc.patch")+fi+if [ "$_cpusched" = "pds" ]; then+ source+=("${_patchsource}/sched/0001-prjc.patch")+fi+if [ "$_cpusched" = "cacule" ]; then+ source+=("${_patchsource}/sched/0001-cacULE.patch")+fi+if [ "$_cpusched" = "cacule-rdb" ]; then+ source+=("${_patchsource}/sched/0001-cacULE.patch")+fi+if [ "$_cpusched" = "tt" ]; then+ source+=("${_patchsource}/sched/0001-tt.patch")+fi+if [ "$_cpusched" = "bore" ]; then+ source+=("${_patchsource}/sched/0001-bore-sched.patch")+fi+source+=("${_patchsource}/0001-arch.patch""${_patchsource}/0002-anbox.patch""${_patchsource}/0003-bbr2.patch"@@ -161,7 +183,6 @@ source=("${_patchsource}/0014-lrng.patch""${_patchsource}/0015-le9.patch""${_patchsource}/0016-ck-hrtimer.patch"- # "${_patchsource}/0017-FG-KASLR.patch""auto-cpu-optimization.sh")@@ -253,7 +274,9 @@ prepare() {scripts/config --enable CONFIG_CFI_CLANGfi- if [ -n "$_use_llvm_lto" ]; then+ ### Selecting the THIN or FULL-LTO compression level+ if [ "$_use_llvm_lto" = "thin" ]; then+ echo "Enabling highest ZSTD compression ratio..."scripts/config --disable LTO_NONE \--enable LTO \--enable LTO_CLANG \@@ -262,6 +285,18 @@ prepare() {--enable HAS_LTO_CLANG \--enable LTO_CLANG_THIN \--enable HAVE_GCC_PLUGINS+ elif [ "$_use_llvm_lto" = "full" ]; then+ echo "Enabling standard ZSTD compression ratio..."+ scripts/config --disable LTO_NONE \+ --enable LTO \+ --enable LTO_CLANG \+ --enable ARCH_SUPPORTS_LTO_CLANG \+ --enable ARCH_SUPPORTS_LTO_CLANG_THIN \+ --enable HAS_LTO_CLANG \+ --enable LTO_CLANG \+ --enable HAVE_GCC_PLUGINS+ else+ scripts/config --enable CONFIG_LTO_NONEfi### Optionally set tickrate to 1000@@ -331,11 +366,6 @@ prepare() {echo "Setting performance governor..."scripts/config --disable CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTILscripts/config --enable CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE- echo "Disabling uneeded governors..."- scripts/config --disable CONFIG_CPU_FREQ_GOV_ONDEMAND- scripts/config --disable CONFIG_CPU_FREQ_GOV_CONSERVATIVE- scripts/config --disable CONFIG_CPU_FREQ_GOV_USERSPACE- scripts/config --disable CONFIG_CPU_FREQ_GOV_SCHEDUTILecho "Set PCIEASPM DRIVER to performance..."scripts/config --enable CONFIG_PCIEASPMscripts/config --enable CONFIG_PCIEASPM_PERFORMANCE@@ -343,6 +373,33 @@ prepare() {scripts/config --enable CONFIG_PCIE_BUS_PERFORMANCEfi+ ### Selecting between tickless idle, perodic tics or full tickless+ if [ "$_tickrate" = "perodic" ]; then+ echo "Enabling periodic ticks..."+ scripts/config --disable CONFIG_NO_HZ_IDLE+ scripts/config --disable CONFIG_NO_HZ_FULL+ scripts/config --disable CONFIG_NO_HZ+ scripts/config --disable CONFIG_NO_HZ_COMMON+ scripts/config --enable CONFIG_HZ_PERIODIC+ elif [ "$_tickrate" = "idle" ]; then+ echo "Enabling tickless idle..."+ scripts/config --disable CONFIG_HZ_PERIODIC+ scripts/config --disable CONFIG_NO_HZ_FULL+ scripts/config --enable CONFIG_NO_HZ_IDLE+ scripts/config --enable CONFIG_NO_HZ+ scripts/config --enable CONFIG_NO_HZ_COMMON+ elif [ "$_tickrate" = "full" ]; then+ echo "Enabling tickless idle..."+ scripts/config --disable CONFIG_HZ_PERIODIC+ scripts/config --disable CONFIG_NO_HZ_IDLE+ scripts/config --disable CONFIG_CONTEXT_TRACKING_FORCE+ scripts/config --enable CONFIG_NO_HZ_FULL_NODEF+ scripts/config --enable CONFIG_NO_HZ_FULL+ scripts/config --enable CONFIG_NO_HZ+ scripts/config --enable CONFIG_NO_HZ_COMMON+ scripts/config --enable CONFIG_CONTEXT_TRACKING+ fi+### Enable KBUILD_CFLAGS -O3if [ -n "$_cc_harder" ]; thenecho "Enabling KBUILD_CFLAGS -O3..."@@ -370,7 +427,7 @@ prepare() {### Enable SPFif [ -n "$_spf_enable" ]; then- echo "Enabling multigenerational LRU..."+ echo "Enabling SPECULATIVE_PAGE_FAULT LRU..."scripts/config --enable CONFIG_SPECULATIVE_PAGE_FAULTfi@@ -515,6 +572,9 @@ prepare() {scripts/config --disable CONFIG_SCHED_DEBUGscripts/config --disable CONFIG_KVM_WERROR+ echo "Enable CONFIG_USER_NS_UNPRIVILEGED"+ scripts/config --enable CONFIG_USER_NS+### Optionally use running kernel's config# code originally by nous; http://aur.archlinux.org/packages.php?ID=40191if [ -n "$_use_current" ]; thendiff --git a/script.sh b/script.shindex d7e29498..3c1485a4 100755--- a/script.sh+++ b/script.sh@@ -35,7 +35,7 @@ mv */*.tar.zst* /home/ptr1337/packages/-find . -name "PKGBUILD" | xargs -I {} sed -i "s/_use_llvm_lto=/_use_llvm_lto==y/" {}+find . -name "PKGBUILD" | xargs -I {} sed -i "s/_use_llvm_lto=/_use_llvm_lto=thin/" {}files=$(find . -name "PKGBUILD")